Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 180

Last change on this file since 180 was 146, checked in by raasch, 17 years ago
further updates for turbulent inflow: PE-grid change for restart is working
Property svn:keywords set to `Id`
File size: 45.8 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
7	! because only this file contains the global variables,
8	! myid_char_14 removed
9	!
10	! Former revisions:
11	! -----------------
12	! $Id: check_open.f90 146 2008-01-17 13:08:34Z raasch $
13	!
14	! 120 2007-10-17 11:54:43Z raasch
15	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
16	!
17	! 105 2007-08-08 07:12:55Z raasch
18	! Different filenames are used in case of a coupled simulation,
19	! coupling_char added to all relevant filenames
20	!
21	! 82 2007-04-16 15:40:52Z raasch
22	! Call of local_getenv removed, preprocessor directives for old systems removed
23	!
24	! 46 2007-03-05 06:00:47Z raasch
25	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
26	!
27	! RCS Log replace by Id keyword, revision history cleaned up
28	!
29	! Revision 1.44 2006/08/22 13:48:34 raasch
30	! xz and yz cross sections now up to nzt+1
31	!
32	! Revision 1.1 1997/08/11 06:10:55 raasch
33	! Initial revision
34	!
35	!
36	! Description:
37	! ------------
38	! Check if file unit is open. If not, open file and, if necessary, write a
39	! header or start other initializing actions, respectively.
40	!------------------------------------------------------------------------------!
41
42	USE array_kind
43	USE arrays_3d
44	USE control_parameters
45	USE grid_variables
46	USE indices
47	USE netcdf_control
48	USE particle_attributes
49	USE pegrid
50	USE profil_parameter
51	USE statistics
52
53	IMPLICIT NONE
54
55	CHARACTER (LEN=2) :: suffix
56	CHARACTER (LEN=20) :: xtext = 'time in s'
57	CHARACTER (LEN=30) :: filename
58	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
59	avs_data_file_localname
60	CHARACTER (LEN=80) :: rtext
61	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
62	batch_scp, zeile
63	CHARACTER (LEN=400) :: command
64
65	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
66	j, k, legpos = 1, timodex = 1
67	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
68
69	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
70	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
71	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
72
73	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
74	sizex = 250.0, sizey = 40.0, texfac = 1.5
75
76	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
77	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
78
79
80	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
81	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
82	rand, rlegfak, sizex, sizey, texfac, &
83	timodex, twoxa, twoya, xtext
84
85
86	!
87	!-- Immediate return if file already open
88	IF ( openfile(file_id)%opened ) RETURN
89
90	!
91	!-- Only certain files are allowed to be re-opened
92	!-- NOTE: some of the other files perhaps also could be re-opened, but it
93	!-- has not been checked so far, if it works!
94	IF ( openfile(file_id)%opened_before ) THEN
95	SELECT CASE ( file_id )
96	CASE ( 13, 14, 21, 22, 23, 80:85 )
97	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
98	IF ( myid == 0 ) PRINT*, '+++ check_open: re-open of unit ', &
99	' 14 is not verified. Please check results!'
100	ENDIF
101
102	CASE DEFAULT
103	IF ( myid == 0 ) THEN
104	PRINT*, '+++ check_open: re-opening of file-id ', file_id, &
105	' is not allowed'
106	ENDIF
107	RETURN
108
109	END SELECT
110	ENDIF
111
112	!
113	!-- Check if file may be opened on the relevant PE
114	SELECT CASE ( file_id )
115
116	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 101:107, 109, 111:113, &
117	116 )
118
119	IF ( myid /= 0 ) THEN
120	PRINT*,'+++ check_open: opening file-id ',file_id, &
121	' not allowed for PE ',myid
122	#if defined( __parallel )
123	CALL MPI_ABORT( comm2d, 9999, ierr )
124	#else
125	CALL local_stop
126	#endif
127	ENDIF
128
129	CASE ( 21, 22, 23 )
130
131	IF ( .NOT. data_output_2d_on_each_pe ) THEN
132	IF ( myid /= 0 ) THEN
133	PRINT*,'+++ check_open: opening file-id ',file_id, &
134	' not allowed for PE ',myid
135	#if defined( __parallel )
136	CALL MPI_ABORT( comm2d, 9999, ierr )
137	#else
138	CALL local_stop
139	#endif
140	ENDIF
141	ENDIF
142
143	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
144
145	!
146	!-- File-ids that are used temporarily in other routines
147	PRINT*,'+++ check_open: opening file-id ',file_id, &
148	' is not allowed since it is used otherwise'
149
150	END SELECT
151
152	!
153	!-- Open relevant files
154	SELECT CASE ( file_id )
155
156	CASE ( 11 )
157
158	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
159	STATUS='OLD' )
160
161	CASE ( 13 )
162
163	IF ( myid_char == '' ) THEN
164	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
165	FORM='UNFORMATTED', STATUS='OLD' )
166	ELSE
167	!
168	!-- First opening of unit 13 openes file _0000 on all PEs because only
169	!-- this file contains the global variables
170	IF ( .NOT. openfile(file_id)%opened_before ) THEN
171	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
172	FORM='UNFORMATTED', STATUS='OLD' )
173	ELSE
174	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
175	FORM='UNFORMATTED', STATUS='OLD' )
176	ENDIF
177	ENDIF
178
179	CASE ( 14 )
180
181	IF ( myid_char == '' ) THEN
182	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
183	FORM='UNFORMATTED', POSITION='APPEND' )
184	ELSE
185	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
186	CALL local_system( 'mkdir BINOUT' // coupling_char )
187	ENDIF
188	#if defined( __parallel )
189	!
190	!-- Set a barrier in order to allow that all other processors in the
191	!-- directory created by PE0 can open their file
192	CALL MPI_BARRIER( comm2d, ierr )
193	#endif
194	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
195	FORM='UNFORMATTED', POSITION='APPEND' )
196	ENDIF
197
198	CASE ( 15 )
199
200	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
201
202	CASE ( 16 )
203
204	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
205
206	CASE ( 17 )
207
208	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
209
210	CASE ( 18 )
211
212	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
213
214	CASE ( 19 )
215
216	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
217
218	CASE ( 20 )
219
220	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
221	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
222	ENDIF
223	IF ( myid_char == '' ) THEN
224	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
225	FORM='UNFORMATTED', POSITION='APPEND' )
226	ELSE
227	#if defined( __parallel )
228	!
229	!-- Set a barrier in order to allow that all other processors in the
230	!-- directory created by PE0 can open their file
231	CALL MPI_BARRIER( comm2d, ierr )
232	#endif
233	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
234	FORM='UNFORMATTED', POSITION='APPEND' )
235	ENDIF
236
237	CASE ( 21 )
238
239	IF ( data_output_2d_on_each_pe ) THEN
240	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
241	FORM='UNFORMATTED', POSITION='APPEND' )
242	ELSE
243	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
244	FORM='UNFORMATTED', POSITION='APPEND' )
245	ENDIF
246
247	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
248	!
249	!-- Output for combine_plot_fields
250	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
251	WRITE (21) -1, nx+1, -1, ny+1 ! total array size
252	WRITE (21) 0, nx+1, 0, ny+1 ! output part
253	ENDIF
254	!
255	!-- Determine and write ISO2D coordiante header
256	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
257	hu = 0.0
258	ho = (ny+1) * dy
259	DO i = 1, ny
260	eta(i) = REAL( i ) / ( ny + 1.0 )
261	ENDDO
262	eta(0) = 0.0
263	eta(ny+1) = 1.0
264
265	WRITE (21) dx,eta,hu,ho
266	DEALLOCATE( eta, ho, hu )
267
268	!
269	!-- Create output file for local parameters
270	IF ( iso2d_output ) THEN
271	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
272	FORM='FORMATTED', DELIM='APOSTROPHE' )
273	openfile(27)%opened = .TRUE.
274	ENDIF
275
276	ENDIF
277
278	CASE ( 22 )
279
280	IF ( data_output_2d_on_each_pe ) THEN
281	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
282	FORM='UNFORMATTED', POSITION='APPEND' )
283	ELSE
284	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
285	POSITION='APPEND' )
286	ENDIF
287
288	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
289	!
290	!-- Output for combine_plot_fields
291	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
292	WRITE (22) -1, nx+1, 0, nz+1 ! total array size
293	WRITE (22) 0, nx+1, 0, nz+1 ! output part
294	ENDIF
295	!
296	!-- Determine and write ISO2D coordiante header
297	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
298	hu = 0.0
299	ho = zu(nz+1)
300	DO i = 1, nz
301	eta(i) = REAL( zu(i) ) / zu(nz+1)
302	ENDDO
303	eta(0) = 0.0
304	eta(nz+1) = 1.0
305
306	WRITE (22) dx,eta,hu,ho
307	DEALLOCATE( eta, ho, hu )
308	!
309	!-- Create output file for local parameters
310	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
311	FORM='FORMATTED', DELIM='APOSTROPHE' )
312	openfile(28)%opened = .TRUE.
313
314	ENDIF
315
316	CASE ( 23 )
317
318	IF ( data_output_2d_on_each_pe ) THEN
319	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
320	FORM='UNFORMATTED', POSITION='APPEND' )
321	ELSE
322	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
323	POSITION='APPEND' )
324	ENDIF
325
326	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
327	!
328	!-- Output for combine_plot_fields
329	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
330	WRITE (23) -1, ny+1, 0, nz+1 ! total array size
331	WRITE (23) 0, ny+1, 0, nz+1 ! output part
332	ENDIF
333	!
334	!-- Determine and write ISO2D coordiante header
335	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
336	hu = 0.0
337	ho = zu(nz+1)
338	DO i = 1, nz
339	eta(i) = REAL( zu(i) ) / zu(nz+1)
340	ENDDO
341	eta(0) = 0.0
342	eta(nz+1) = 1.0
343
344	WRITE (23) dx,eta,hu,ho
345	DEALLOCATE( eta, ho, hu )
346	!
347	!-- Create output file for local parameters
348	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
349	FORM='FORMATTED', DELIM='APOSTROPHE' )
350	openfile(29)%opened = .TRUE.
351
352	ENDIF
353
354	CASE ( 30 )
355
356	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
357	FORM='UNFORMATTED' )
358	!
359	!-- Write coordinate file for AVS
360	IF ( myid == 0 ) THEN
361	#if defined( __parallel )
362	!
363	!-- Specifications for combine_plot_fields
364	IF ( .NOT. do3d_compress ) THEN
365	WRITE ( 30 ) -1,nx+1,-1,ny+1,0,nz_do3d
366	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
367	ENDIF
368	#endif
369	!
370	!-- Write coordinate file for AVS:
371	!-- First determine file names (including cyle numbers) of AVS files on
372	!-- target machine (to which the files are to be transferred).
373	!-- Therefore path information has to be obtained first.
374	IF ( avs_output ) THEN
375	iaddres = LEN_TRIM( return_addres )
376	iusern = LEN_TRIM( return_username )
377
378	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
379	DO WHILE ( .NOT. avs_coor_file_found .OR. &
380	.NOT. avs_data_file_found )
381
382	READ ( 3, '(A)', END=1 ) zeile
383
384	SELECT CASE ( zeile(1:11) )
385
386	CASE ( 'PLOT3D_COOR' )
387	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
388	avs_coor_file_localname
389	avs_coor_file_found = .TRUE.
390
391	CASE ( 'PLOT3D_DATA' )
392	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
393	avs_data_file_localname
394	avs_data_file_found = .TRUE.
395
396	CASE DEFAULT
397	READ ( 3, '(A/A)' ) zeile, zeile
398
399	END SELECT
400
401	ENDDO
402	!
403	!-- Now the cycle numbers on the remote machine must be obtained
404	!-- using batch_scp
405	1 CLOSE ( 3 )
406	IF ( .NOT. avs_coor_file_found .OR. &
407	.NOT. avs_data_file_found ) THEN
408	PRINT*, '+++ check_open: no filename for AVS-data-file ', &
409	'found in MRUN-config-file'
410	PRINT*, ' filename in FLD-file set to ', &
411	'"unknown"'
412
413	avs_coor_file = 'unknown'
414	avs_data_file = 'unknown'
415	ELSE
416	get_filenames = .TRUE.
417	IF ( TRIM( host ) == 'hpmuk' .OR. &
418	TRIM( host ) == 'lcmuk' ) THEN
419	batch_scp = '/home/raasch/pub/batch_scp'
420	ELSEIF ( TRIM( host ) == 'nech' ) THEN
421	batch_scp = '/ipf/b/b323011/pub/batch_scp'
422	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
423	TRIM( host ) == 'ibmb' ) THEN
424	batch_scp = '/home/h/niksiraa/pub/batch_scp'
425	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
426	batch_scp = '/home/nhbksira/pub/batch_scp'
427	ELSE
428	PRINT*,'+++ check_open: no path for batch_scp on host "',&
429	TRIM( host ), '"'
430	get_filenames = .FALSE.
431	ENDIF
432
433	IF ( get_filenames ) THEN
434	!
435	!-- Determine the coordinate file name.
436	!-- /etc/passwd serves as Dummy-Datei, because it is not
437	!-- really transferred.
438	command = TRIM( batch_scp ) // ' -n -u ' // &
439	return_username(1:iusern) // ' ' // &
440	return_addres(1:iaddres) // ' /etc/passwd "' // &
441	TRIM( avs_coor_file_catalog ) // '" ' // &
442	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
443
444	CALL local_system( command )
445	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
446	READ ( 3, '(A)' ) avs_coor_file
447	CLOSE ( 3 )
448	!
449	!-- Determine the data file name
450	command = TRIM( batch_scp ) // ' -n -u ' // &
451	return_username(1:iusern) // ' ' // &
452	return_addres(1:iaddres) // ' /etc/passwd "' // &
453	TRIM( avs_data_file_catalog ) // '" ' // &
454	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
455
456	CALL local_system( command )
457	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
458	READ ( 3, '(A)' ) avs_data_file
459	CLOSE ( 3 )
460
461	ELSE
462
463	avs_coor_file = 'unknown'
464	avs_data_file = 'unknown'
465
466	ENDIF
467
468	ENDIF
469
470	!
471	!-- Output of the coordinate file description for FLD-file
472	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
473	openfile(33)%opened = .TRUE.
474	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
475	TRIM( avs_coor_file ), (nx+2)*4, &
476	TRIM( avs_coor_file ), (nx+2)4+(ny+2)4
477
478
479	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
480	DO i = 0, nx+1
481	xkoor(i) = i * dx
482	ENDDO
483	DO j = 0, ny+1
484	ykoor(j) = j * dy
485	ENDDO
486	DO k = 0, nz_do3d
487	zkoor(k) = zu(k)
488	ENDDO
489
490	!
491	!-- Create and write on AVS coordinate file
492	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
493	openfile(31)%opened = .TRUE.
494
495	WRITE (31) xkoor, ykoor, zkoor
496	DEALLOCATE( xkoor, ykoor, zkoor )
497
498	!
499	!-- Create FLD file (being written on in close_file)
500	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
501	openfile(32)%opened = .TRUE.
502
503	!
504	!-- Create flag file for compressed 3D output,
505	!-- influences output commands in mrun
506	IF ( do3d_compress ) THEN
507	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
508	WRITE ( 3, '(1X)' )
509	CLOSE ( 3 )
510	ENDIF
511
512	ENDIF
513
514	ENDIF
515
516	!
517	!-- In case of data compression output of the coordinates of the
518	!-- corresponding partial array of a PE only once at the top of the file
519	IF ( avs_output .AND. do3d_compress ) THEN
520	WRITE ( 30 ) nxl-1, nxr+1, nys-1, nyn+1, nzb, nz_do3d
521	ENDIF
522
523	CASE ( 40:49 )
524
525	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
526	suffix = ''
527	ELSE
528	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
529	ENDIF
530	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
531	TRIM( suffix ), &
532	FORM='FORMATTED' )
533	!
534	!-- Write contents comments at the top of the file
535	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
536	TRIM( region( file_id - 40 ) )
537
538	CASE ( 50:59 )
539
540	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
541	suffix = ''
542	ELSE
543	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
544	ENDIF
545	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
546	TRIM( suffix ), &
547	FORM='FORMATTED', RECL=496 )
548	!
549	!-- Write PROFIL parameter file for output of time series
550	!-- NOTE: To be on the safe side, this output is done at the beginning of
551	!-- the model run (in case of collapse) and it is repeated in
552	!-- close_file, then, however, with value ranges for the coordinate
553	!-- systems
554	!
555	!-- Firstly determine the number of the coordinate systems to be drawn
556	cranz = 0
557	DO j = 1, 10
558	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
559	ENDDO
560	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
561	TRIM( region( file_id - 50 ) )
562	!
563	!-- Write RAHMEN parameter
564	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
565	TRIM( suffix ), &
566	FORM='FORMATTED', DELIM='APOSTROPHE' )
567	WRITE ( 90, RAHMEN )
568	!
569	!-- Determine and write CROSS parameters for the individual coordinate
570	!-- systems
571	DO j = 1, 10
572	k = cross_ts_number_count(j)
573	IF ( k /= 0 ) THEN
574	!
575	!-- Store curve numbers, colours and line style
576	klist(1:k) = cross_ts_numbers(1:k,j)
577	klist(k+1:10) = 999999
578	cucol(1:k) = linecolors(1:k)
579	lstyle(1:k) = linestyles(1:k)
580	!
581	!-- Write CROSS parameter
582	WRITE ( 90, CROSS )
583
584	ENDIF
585	ENDDO
586
587	CLOSE ( 90 )
588	!
589	!-- Write all labels at the top of the data file, but only during the
590	!-- first run of a sequence of jobs. The following jobs copy the time
591	!-- series data to the bottom of that file.
592	IF ( runnr == 0 ) THEN
593	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
594	' ' // TRIM( region( file_id - 50 ) )
595	ENDIF
596
597
598	CASE ( 80 )
599
600	IF ( myid_char == '' ) THEN
601	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
602	FORM='FORMATTED', POSITION='APPEND' )
603	ELSE
604	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
605	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
606	ENDIF
607	#if defined( __parallel )
608	!
609	!-- Set a barrier in order to allow that thereafter all other
610	!-- processors in the directory created by PE0 can open their file.
611	!-- WARNING: The following barrier will lead to hanging jobs, if
612	!-- check_open is first called from routine
613	!-- allocate_prt_memory!
614	IF ( .NOT. openfile(80)%opened_before ) THEN
615	CALL MPI_BARRIER( comm2d, ierr )
616	ENDIF
617	#endif
618	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
619	myid_char, &
620	FORM='FORMATTED', POSITION='APPEND' )
621	ENDIF
622
623	IF ( .NOT. openfile(80)%opened_before ) THEN
624	WRITE ( 80, 8000 ) TRIM( run_description_header )
625	ENDIF
626
627	CASE ( 81 )
628
629	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
630	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
631
632	CASE ( 82 )
633
634	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
635	POSITION = 'APPEND' )
636
637	CASE ( 83 )
638
639	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
640	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
641
642	CASE ( 84 )
643
644	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
645	POSITION='APPEND' )
646
647	CASE ( 85 )
648
649	IF ( myid_char == '' ) THEN
650	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
651	FORM='UNFORMATTED', POSITION='APPEND' )
652	ELSE
653	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
654	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
655	ENDIF
656	#if defined( __parallel )
657	!
658	!-- Set a barrier in order to allow that thereafter all other
659	!-- processors in the directory created by PE0 can open their file
660	CALL MPI_BARRIER( comm2d, ierr )
661	#endif
662	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
663	myid_char, &
664	FORM='UNFORMATTED', POSITION='APPEND' )
665	ENDIF
666
667	IF ( .NOT. openfile(85)%opened_before ) THEN
668	WRITE ( 85 ) run_description_header
669	!
670	!-- Attention: change version number whenever the output format on
671	!-- unit 85 is changed (see also in routine advec_particles)
672	rtext = 'data format version 3.0'
673	WRITE ( 85 ) rtext
674	WRITE ( 85 ) number_of_particle_groups, &
675	max_number_of_particle_groups
676	WRITE ( 85 ) particle_groups
677	ENDIF
678
679	#if defined( __netcdf )
680	CASE ( 101, 111 )
681	!
682	!-- Set filename depending on unit number
683	IF ( file_id == 101 ) THEN
684	filename = 'DATA_2D_XY_NETCDF' // coupling_char
685	av = 0
686	ELSE
687	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
688	av = 1
689	ENDIF
690	!
691	!-- Inquire, if there is a NetCDF file from a previuos run. This should
692	!-- be opened for extension, if its dimensions and variables match the
693	!-- actual run.
694	INQUIRE( FILE=filename, EXIST=netcdf_extend )
695
696	IF ( netcdf_extend ) THEN
697	!
698	!-- Open an existing NetCDF file for output
699	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
700	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 20 )
701	!
702	!-- Read header information and set all ids. If there is a mismatch
703	!-- between the previuos and the actual run, netcdf_extend is returned
704	!-- as .FALSE.
705	CALL define_netcdf_header( 'xy', netcdf_extend, av )
706
707	!
708	!-- Remove the local file, if it can not be extended
709	IF ( .NOT. netcdf_extend ) THEN
710	nc_stat = NF90_CLOSE( id_set_xy(av) )
711	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 21 )
712	CALL local_system( 'rm ' // TRIM( filename ) )
713	ENDIF
714
715	ENDIF
716
717	IF ( .NOT. netcdf_extend ) THEN
718	!
719	!-- Create a new NetCDF output file
720	IF ( netcdf_64bit ) THEN
721	#if defined( __netcdf_64bit )
722	nc_stat = NF90_CREATE( filename, &
723	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
724	id_set_xy(av) )
725	#else
726	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
727	'offset allowed on this machine'
728	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
729	#endif
730	ELSE
731	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
732	ENDIF
733	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 22 )
734	!
735	!-- Define the header
736	CALL define_netcdf_header( 'xy', netcdf_extend, av )
737
738	ENDIF
739
740	CASE ( 102, 112 )
741	!
742	!-- Set filename depending on unit number
743	IF ( file_id == 102 ) THEN
744	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
745	av = 0
746	ELSE
747	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
748	av = 1
749	ENDIF
750	!
751	!-- Inquire, if there is a NetCDF file from a previuos run. This should
752	!-- be opened for extension, if its dimensions and variables match the
753	!-- actual run.
754	INQUIRE( FILE=filename, EXIST=netcdf_extend )
755
756	IF ( netcdf_extend ) THEN
757	!
758	!-- Open an existing NetCDF file for output
759	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
760	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 23 )
761	!
762	!-- Read header information and set all ids. If there is a mismatch
763	!-- between the previuos and the actual run, netcdf_extend is returned
764	!-- as .FALSE.
765	CALL define_netcdf_header( 'xz', netcdf_extend, av )
766
767	!
768	!-- Remove the local file, if it can not be extended
769	IF ( .NOT. netcdf_extend ) THEN
770	nc_stat = NF90_CLOSE( id_set_xz(av) )
771	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 24 )
772	CALL local_system( 'rm ' // TRIM( filename ) )
773	ENDIF
774
775	ENDIF
776
777	IF ( .NOT. netcdf_extend ) THEN
778	!
779	!-- Create a new NetCDF output file
780	IF ( netcdf_64bit ) THEN
781	#if defined( __netcdf_64bit )
782	nc_stat = NF90_CREATE( filename, &
783	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
784	id_set_xz(av) )
785	#else
786	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
787	'offset allowed on this machine'
788	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
789	#endif
790	ELSE
791	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
792	ENDIF
793	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 25 )
794	!
795	!-- Define the header
796	CALL define_netcdf_header( 'xz', netcdf_extend, av )
797
798	ENDIF
799
800	CASE ( 103, 113 )
801	!
802	!-- Set filename depending on unit number
803	IF ( file_id == 103 ) THEN
804	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
805	av = 0
806	ELSE
807	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
808	av = 1
809	ENDIF
810	!
811	!-- Inquire, if there is a NetCDF file from a previuos run. This should
812	!-- be opened for extension, if its dimensions and variables match the
813	!-- actual run.
814	INQUIRE( FILE=filename, EXIST=netcdf_extend )
815
816	IF ( netcdf_extend ) THEN
817	!
818	!-- Open an existing NetCDF file for output
819	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
820	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 26 )
821	!
822	!-- Read header information and set all ids. If there is a mismatch
823	!-- between the previuos and the actual run, netcdf_extend is returned
824	!-- as .FALSE.
825	CALL define_netcdf_header( 'yz', netcdf_extend, av )
826
827	!
828	!-- Remove the local file, if it can not be extended
829	IF ( .NOT. netcdf_extend ) THEN
830	nc_stat = NF90_CLOSE( id_set_yz(av) )
831	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 27 )
832	CALL local_system( 'rm ' // TRIM( filename ) )
833	ENDIF
834
835	ENDIF
836
837	IF ( .NOT. netcdf_extend ) THEN
838	!
839	!-- Create a new NetCDF output file
840	IF ( netcdf_64bit ) THEN
841	#if defined( __netcdf_64bit )
842	nc_stat = NF90_CREATE( filename, &
843	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET), &
844	id_set_yz(av) )
845	#else
846	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
847	'offset allowed on this machine'
848	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
849	#endif
850	ELSE
851	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
852	ENDIF
853	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 28 )
854	!
855	!-- Define the header
856	CALL define_netcdf_header( 'yz', netcdf_extend, av )
857
858	ENDIF
859
860	CASE ( 104 )
861	!
862	!-- Set filename
863	filename = 'DATA_1D_PR_NETCDF' // coupling_char
864
865	!
866	!-- Inquire, if there is a NetCDF file from a previuos run. This should
867	!-- be opened for extension, if its variables match the actual run.
868	INQUIRE( FILE=filename, EXIST=netcdf_extend )
869
870	IF ( netcdf_extend ) THEN
871	!
872	!-- Open an existing NetCDF file for output
873	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
874	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 29 )
875	!
876	!-- Read header information and set all ids. If there is a mismatch
877	!-- between the previuos and the actual run, netcdf_extend is returned
878	!-- as .FALSE.
879	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
880
881	!
882	!-- Remove the local file, if it can not be extended
883	IF ( .NOT. netcdf_extend ) THEN
884	nc_stat = NF90_CLOSE( id_set_pr )
885	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 30 )
886	CALL local_system( 'rm ' // TRIM( filename ) )
887	ENDIF
888
889	ENDIF
890
891	IF ( .NOT. netcdf_extend ) THEN
892	!
893	!-- Create a new NetCDF output file
894	IF ( netcdf_64bit ) THEN
895	#if defined( __netcdf_64bit )
896	nc_stat = NF90_CREATE( filename, &
897	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
898	id_set_pr )
899	#else
900	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
901	'offset allowed on this machine'
902	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
903	#endif
904	ELSE
905	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
906	ENDIF
907	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 31 )
908	!
909	!-- Define the header
910	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
911
912	ENDIF
913
914	CASE ( 105 )
915	!
916	!-- Set filename
917	filename = 'DATA_1D_TS_NETCDF' // coupling_char
918
919	!
920	!-- Inquire, if there is a NetCDF file from a previuos run. This should
921	!-- be opened for extension, if its variables match the actual run.
922	INQUIRE( FILE=filename, EXIST=netcdf_extend )
923
924	IF ( netcdf_extend ) THEN
925	!
926	!-- Open an existing NetCDF file for output
927	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
928	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 32 )
929	!
930	!-- Read header information and set all ids. If there is a mismatch
931	!-- between the previuos and the actual run, netcdf_extend is returned
932	!-- as .FALSE.
933	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
934
935	!
936	!-- Remove the local file, if it can not be extended
937	IF ( .NOT. netcdf_extend ) THEN
938	nc_stat = NF90_CLOSE( id_set_ts )
939	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 33 )
940	CALL local_system( 'rm ' // TRIM( filename ) )
941	ENDIF
942
943	ENDIF
944
945	IF ( .NOT. netcdf_extend ) THEN
946	!
947	!-- Create a new NetCDF output file
948	IF ( netcdf_64bit ) THEN
949	#if defined( __netcdf_64bit )
950	nc_stat = NF90_CREATE( filename, &
951	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
952	id_set_ts )
953	#else
954	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
955	'offset allowed on this machine'
956	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
957	#endif
958	ELSE
959	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
960	ENDIF
961	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 34 )
962	!
963	!-- Define the header
964	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
965
966	ENDIF
967
968
969	CASE ( 106, 116 )
970	!
971	!-- Set filename depending on unit number
972	IF ( file_id == 106 ) THEN
973	filename = 'DATA_3D_NETCDF' // coupling_char
974	av = 0
975	ELSE
976	filename = 'DATA_3D_AV_NETCDF' // coupling_char
977	av = 1
978	ENDIF
979	!
980	!-- Inquire, if there is a NetCDF file from a previuos run. This should
981	!-- be opened for extension, if its dimensions and variables match the
982	!-- actual run.
983	INQUIRE( FILE=filename, EXIST=netcdf_extend )
984
985	IF ( netcdf_extend ) THEN
986	!
987	!-- Open an existing NetCDF file for output
988	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
989	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 35 )
990	!
991	!-- Read header information and set all ids. If there is a mismatch
992	!-- between the previuos and the actual run, netcdf_extend is returned
993	!-- as .FALSE.
994	CALL define_netcdf_header( '3d', netcdf_extend, av )
995
996	!
997	!-- Remove the local file, if it can not be extended
998	IF ( .NOT. netcdf_extend ) THEN
999	nc_stat = NF90_CLOSE( id_set_3d(av) )
1000	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 36 )
1001	CALL local_system('rm ' // TRIM( filename ) )
1002	ENDIF
1003
1004	ENDIF
1005
1006	IF ( .NOT. netcdf_extend ) THEN
1007	!
1008	!-- Create a new NetCDF output file
1009	IF ( netcdf_64bit_3d ) THEN
1010	#if defined( __netcdf_64bit )
1011	nc_stat = NF90_CREATE( filename, &
1012	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1013	id_set_3d(av) )
1014	#else
1015	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
1016	'offset allowed on this machine'
1017	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1018	#endif
1019	ELSE
1020	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1021	ENDIF
1022	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 37 )
1023	!
1024	!-- Define the header
1025	CALL define_netcdf_header( '3d', netcdf_extend, av )
1026
1027	ENDIF
1028
1029
1030	CASE ( 107 )
1031	!
1032	!-- Set filename
1033	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1034
1035	!
1036	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1037	!-- be opened for extension, if its variables match the actual run.
1038	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1039
1040	IF ( netcdf_extend ) THEN
1041	!
1042	!-- Open an existing NetCDF file for output
1043	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1044	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 38 )
1045	!
1046	!-- Read header information and set all ids. If there is a mismatch
1047	!-- between the previuos and the actual run, netcdf_extend is returned
1048	!-- as .FALSE.
1049	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1050
1051	!
1052	!-- Remove the local file, if it can not be extended
1053	IF ( .NOT. netcdf_extend ) THEN
1054	nc_stat = NF90_CLOSE( id_set_sp )
1055	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 39 )
1056	CALL local_system( 'rm ' // TRIM( filename ) )
1057	ENDIF
1058
1059	ENDIF
1060
1061	IF ( .NOT. netcdf_extend ) THEN
1062	!
1063	!-- Create a new NetCDF output file
1064	IF ( netcdf_64bit ) THEN
1065	#if defined( __netcdf_64bit )
1066	nc_stat = NF90_CREATE( filename, &
1067	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1068	id_set_sp )
1069	#else
1070	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
1071	'offset allowed on this machine'
1072	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1073	#endif
1074	ELSE
1075	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1076	ENDIF
1077	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 40 )
1078	!
1079	!-- Define the header
1080	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1081
1082	ENDIF
1083
1084
1085	CASE ( 108 )
1086
1087	IF ( myid_char == '' ) THEN
1088	filename = 'DATA_PRT_NETCDF' // coupling_char
1089	ELSE
1090	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1091	myid_char
1092	ENDIF
1093	!
1094	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1095	!-- be opened for extension, if its variables match the actual run.
1096	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1097
1098	IF ( netcdf_extend ) THEN
1099	!
1100	!-- Open an existing NetCDF file for output
1101	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1102	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 41 )
1103	!
1104	!-- Read header information and set all ids. If there is a mismatch
1105	!-- between the previuos and the actual run, netcdf_extend is returned
1106	!-- as .FALSE.
1107	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1108
1109	!
1110	!-- Remove the local file, if it can not be extended
1111	IF ( .NOT. netcdf_extend ) THEN
1112	nc_stat = NF90_CLOSE( id_set_prt )
1113	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 42 )
1114	CALL local_system( 'rm ' // filename )
1115	ENDIF
1116
1117	ENDIF
1118
1119	IF ( .NOT. netcdf_extend ) THEN
1120
1121	!
1122	!-- For runs on multiple processors create the subdirectory
1123	IF ( myid_char /= '' ) THEN
1124	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1125	THEN ! needs modification in case of non-extendable sets
1126	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1127	TRIM( coupling_char ) // '/' )
1128	ENDIF
1129	#if defined( __parallel )
1130	!
1131	!-- Set a barrier in order to allow that all other processors in the
1132	!-- directory created by PE0 can open their file
1133	CALL MPI_BARRIER( comm2d, ierr )
1134	#endif
1135	ENDIF
1136
1137	!
1138	!-- Create a new NetCDF output file
1139	IF ( netcdf_64bit ) THEN
1140	#if defined( __netcdf_64bit )
1141	nc_stat = NF90_CREATE( filename, &
1142	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1143	id_set_prt )
1144	#else
1145	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
1146	'offset allowed on this machine'
1147	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1148	#endif
1149	ELSE
1150	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1151	ENDIF
1152	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 43 )
1153
1154	!
1155	!-- Define the header
1156	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1157
1158	ENDIF
1159
1160	CASE ( 109 )
1161	!
1162	!-- Set filename
1163	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1164
1165	!
1166	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1167	!-- be opened for extension, if its variables match the actual run.
1168	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1169
1170	IF ( netcdf_extend ) THEN
1171	!
1172	!-- Open an existing NetCDF file for output
1173	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1174	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 393 )
1175	!
1176	!-- Read header information and set all ids. If there is a mismatch
1177	!-- between the previuos and the actual run, netcdf_extend is returned
1178	!-- as .FALSE.
1179	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1180
1181	!
1182	!-- Remove the local file, if it can not be extended
1183	IF ( .NOT. netcdf_extend ) THEN
1184	nc_stat = NF90_CLOSE( id_set_pts )
1185	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 394 )
1186	CALL local_system( 'rm ' // TRIM( filename ) )
1187	ENDIF
1188
1189	ENDIF
1190
1191	IF ( .NOT. netcdf_extend ) THEN
1192	!
1193	!-- Create a new NetCDF output file
1194	IF ( netcdf_64bit ) THEN
1195	#if defined( __netcdf_64bit )
1196	nc_stat = NF90_CREATE( filename, &
1197	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1198	id_set_pts )
1199	#else
1200	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
1201	'offset allowed on this machine'
1202	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1203	#endif
1204	ELSE
1205	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1206	ENDIF
1207	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 395 )
1208	!
1209	!-- Define the header
1210	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1211
1212	ENDIF
1213	#else
1214
1215	CASE ( 101:109, 111:113, 116 )
1216
1217	!
1218	!-- Nothing is done in case of missing netcdf support
1219	RETURN
1220
1221	#endif
1222
1223	CASE DEFAULT
1224
1225	PRINT*,'+++ check_open: no OPEN-statement for file-id ',file_id
1226	#if defined( __parallel )
1227	CALL MPI_ABORT( comm2d, 9999, ierr )
1228	#else
1229	CALL local_stop
1230	#endif
1231
1232	END SELECT
1233
1234	!
1235	!-- Set open flag
1236	openfile(file_id)%opened = .TRUE.
1237
1238	!
1239	!-- Formats
1240	3300 FORMAT ('#'/ &
1241	'coord 1 file=',A,' filetype=unformatted'/ &
1242	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1243	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1244	'#')
1245	4000 FORMAT ('# ',A)
1246	5000 FORMAT ('# ',A/ &
1247	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1248	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1249	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1250	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1251	8000 FORMAT (A/ &
1252	' step time # of parts lPE sent/recv rPE sent/recv ',&
1253	'sPE sent/recv nPE sent/recv max # of parts'/ &
1254	103('-'))
1255
1256	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |