Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 992

Last change on this file since 992 was 965, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 56.3 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
	3	!------------------------------------------------------------------------------!
[247]	4	! Current revisions:
[1]	5	! -----------------
	6	!
[965]	7	!
[1]	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: check_open.f90 965 2012-07-26 09:29:52Z hoffmann $
[810]	11	!
[965]	12	! 964 2012-07-26 09:14:24Z raasch
	13	! old profil-units (40:49) removed,
	14	! append feature removed from unit 14
	15	!
[850]	16	! 849 2012-03-15 10:35:09Z raasch
	17	! comment changed
	18	!
[810]	19	! 809 2012-01-30 13:32:58Z maronga
	20	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	21	!
[808]	22	! 807 2012-01-25 11:53:51Z maronga
	23	! New cpp directive "__check" implemented which is used by check_namelist_files
	24	!
[766]	25	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
[77]	26	!
[668]	27	! 667 2010-12-23 12:06:00Z suehring/gryschka
	28	! Output of total array size was adapted to nbgp.
	29	!
[601]	30	! 600 2010-11-24 16:10:51Z raasch
	31	! bugfix in opening of cross section netcdf-files (parallel opening with
	32	! netcdf4 only works for netcdf_data_format > 2)
	33	!
[565]	34	! 564 2010-09-30 13:18:59Z helmke
	35	! start number of mask output files changed to 201, netcdf message identifiers
	36	! of masked output changed
	37	!
[520]	38	! 519 2010-03-19 05:30:02Z raasch
	39	! NetCDF4 support for particle data
	40	!
[494]	41	! 493 2010-03-01 08:30:24Z raasch
	42	! NetCDF4 support (parallel output)
	43	!
[449]	44	! 410 2009-12-04 17:05:40Z letzel
	45	! masked data output
	46	!
[392]	47	! 277 2009-03-31 09:13:47Z heinze
	48	! Output of NetCDF messages with aid of message handling routine.
	49	! Output of messages replaced by message handling routine
	50	!
[198]	51	! 146 2008-01-17 13:08:34Z raasch
	52	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	53	! because only this file contains the global variables,
	54	! myid_char_14 removed
	55	!
[139]	56	! 120 2007-10-17 11:54:43Z raasch
	57	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
	58	!
[110]	59	! 105 2007-08-08 07:12:55Z raasch
	60	! Different filenames are used in case of a coupled simulation,
	61	! coupling_char added to all relevant filenames
	62	!
[83]	63	! 82 2007-04-16 15:40:52Z raasch
	64	! Call of local_getenv removed, preprocessor directives for old systems removed
	65	!
[77]	66	! 46 2007-03-05 06:00:47Z raasch
	67	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	68	!
[3]	69	! RCS Log replace by Id keyword, revision history cleaned up
	70	!
[1]	71	! Revision 1.44 2006/08/22 13:48:34 raasch
	72	! xz and yz cross sections now up to nzt+1
	73	!
	74	! Revision 1.1 1997/08/11 06:10:55 raasch
	75	! Initial revision
	76	!
	77	!
	78	! Description:
	79	! ------------
	80	! Check if file unit is open. If not, open file and, if necessary, write a
	81	! header or start other initializing actions, respectively.
	82	!------------------------------------------------------------------------------!
	83
	84	USE array_kind
	85	USE arrays_3d
	86	USE control_parameters
	87	USE grid_variables
	88	USE indices
	89	USE netcdf_control
	90	USE particle_attributes
	91	USE pegrid
	92	USE profil_parameter
	93	USE statistics
	94
	95	IMPLICIT NONE
	96
[410]	97	CHARACTER (LEN=2) :: mask_char, suffix
[82]	98	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	99	CHARACTER (LEN=30) :: filename
	100	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	101	avs_data_file_localname
	102	CHARACTER (LEN=80) :: rtext
	103	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	104	batch_scp, zeile
	105	CHARACTER (LEN=400) :: command
	106
	107	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
	108	j, k, legpos = 1, timodex = 1
	109	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
	110
	111	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	112	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	113	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	114
	115	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	116	sizex = 250.0, sizey = 40.0, texfac = 1.5
	117
	118	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	119	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	120
	121
	122	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
	123	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
	124	rand, rlegfak, sizex, sizey, texfac, &
	125	timodex, twoxa, twoya, xtext
	126
	127
	128	!
	129	!-- Immediate return if file already open
	130	IF ( openfile(file_id)%opened ) RETURN
	131
[809]	132	#if ! defined ( __check )
[1]	133	!
	134	!-- Only certain files are allowed to be re-opened
	135	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	136	!-- has not been checked so far, if it works!
	137	IF ( openfile(file_id)%opened_before ) THEN
	138	SELECT CASE ( file_id )
[143]	139	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	140	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	141	message_string = 're-open of unit ' // &
[274]	142	'14 is not verified. Please check results!'
[247]	143	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	144	ENDIF
[143]	145
[1]	146	CASE DEFAULT
[247]	147	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	148	' is not allowed'
[247]	149	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	150
[1]	151	RETURN
[143]	152
[1]	153	END SELECT
	154	ENDIF
[807]	155	#endif
[1]	156
	157	!
	158	!-- Check if file may be opened on the relevant PE
	159	SELECT CASE ( file_id )
	160
[964]	161	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109 )
[410]	162
[493]	163	IF ( myid /= 0 ) THEN
	164	WRITE( message_string, * ) 'opening file-id ',file_id, &
	165	' not allowed for PE ',myid
	166	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	167	ENDIF
	168
[564]	169	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	170
	171	IF ( netcdf_data_format < 3 ) THEN
[247]	172
[410]	173	IF ( myid /= 0 ) THEN
	174	WRITE( message_string, * ) 'opening file-id ',file_id, &
	175	' not allowed for PE ',myid
	176	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	177	ENDIF
	178
[493]	179	ENDIF
[1]	180
	181	CASE ( 21, 22, 23 )
	182
	183	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	184	IF ( myid /= 0 ) THEN
[247]	185	WRITE( message_string, * ) 'opening file-id ',file_id, &
	186	' not allowed for PE ',myid
[277]	187	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	188	END IF
[1]	189	ENDIF
	190
	191	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	192
	193	!
	194	!-- File-ids that are used temporarily in other routines
[247]	195	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	196	' is not allowed since it is used otherwise'
[247]	197	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	198
[1]	199	END SELECT
	200
	201	!
	202	!-- Open relevant files
	203	SELECT CASE ( file_id )
	204
	205	CASE ( 11 )
	206
[807]	207	#if defined ( __check )
	208	!
	209	!-- In case of a prior parameter file check, the p3d data is stored in
	210	!-- PARIN, while the p3df is stored in PARINF. This only applies to
	211	!-- check_namelist_files!
	212	IF ( check_restart == 2 ) THEN
	213	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
	214	STATUS='OLD' )
	215	ELSE
	216	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	217	STATUS='OLD' )
	218	END IF
	219	#else
	220
[102]	221	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	222	STATUS='OLD' )
[807]	223	#endif
[1]	224
	225	CASE ( 13 )
	226
	227	IF ( myid_char == '' ) THEN
[102]	228	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	229	FORM='UNFORMATTED', STATUS='OLD' )
[1]	230	ELSE
[143]	231	!
	232	!-- First opening of unit 13 openes file _0000 on all PEs because only
	233	!-- this file contains the global variables
	234	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	235	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	236	FORM='UNFORMATTED', STATUS='OLD' )
	237	ELSE
	238	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	239	FORM='UNFORMATTED', STATUS='OLD' )
	240	ENDIF
[1]	241	ENDIF
	242
	243	CASE ( 14 )
	244
	245	IF ( myid_char == '' ) THEN
[102]	246	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	247	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	248	ELSE
	249	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	250	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	251	ENDIF
[809]	252	#if defined( __parallel ) && ! defined ( __check )
[1]	253	!
	254	!-- Set a barrier in order to allow that all other processors in the
	255	!-- directory created by PE0 can open their file
	256	CALL MPI_BARRIER( comm2d, ierr )
	257	#endif
[146]	258	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[887]	259	FORM='UNFORMATTED' )
[1]	260	ENDIF
	261
	262	CASE ( 15 )
	263
[102]	264	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	265
	266	CASE ( 16 )
	267
[102]	268	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	269
	270	CASE ( 17 )
	271
[102]	272	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	273
	274	CASE ( 18 )
	275
[102]	276	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	277
	278	CASE ( 19 )
	279
[102]	280	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	281
	282	CASE ( 20 )
	283
	284	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	285	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	286	ENDIF
	287	IF ( myid_char == '' ) THEN
[105]	288	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	289	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	290	ELSE
[809]	291	#if defined( __parallel ) && ! defined ( __check )
[1]	292	!
	293	!-- Set a barrier in order to allow that all other processors in the
	294	!-- directory created by PE0 can open their file
	295	CALL MPI_BARRIER( comm2d, ierr )
	296	#endif
[105]	297	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	298	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	299	ENDIF
	300
	301	CASE ( 21 )
	302
	303	IF ( data_output_2d_on_each_pe ) THEN
[105]	304	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	305	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	306	ELSE
[102]	307	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	308	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	309	ENDIF
	310
	311	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	312	!
	313	!-- Output for combine_plot_fields
	314	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	315	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	316	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	317	ENDIF
	318	!
	319	!-- Determine and write ISO2D coordiante header
	320	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	321	hu = 0.0
	322	ho = (ny+1) * dy
	323	DO i = 1, ny
	324	eta(i) = REAL( i ) / ( ny + 1.0 )
	325	ENDDO
	326	eta(0) = 0.0
	327	eta(ny+1) = 1.0
	328
	329	WRITE (21) dx,eta,hu,ho
	330	DEALLOCATE( eta, ho, hu )
	331
	332	!
	333	!-- Create output file for local parameters
	334	IF ( iso2d_output ) THEN
[102]	335	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	336	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	337	openfile(27)%opened = .TRUE.
	338	ENDIF
	339
	340	ENDIF
	341
	342	CASE ( 22 )
	343
	344	IF ( data_output_2d_on_each_pe ) THEN
[105]	345	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	346	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	347	ELSE
[102]	348	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	349	POSITION='APPEND' )
	350	ENDIF
	351
	352	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	353	!
	354	!-- Output for combine_plot_fields
	355	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	356	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	357	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	358	ENDIF
	359	!
	360	!-- Determine and write ISO2D coordiante header
	361	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	362	hu = 0.0
	363	ho = zu(nz+1)
	364	DO i = 1, nz
	365	eta(i) = REAL( zu(i) ) / zu(nz+1)
	366	ENDDO
	367	eta(0) = 0.0
	368	eta(nz+1) = 1.0
	369
	370	WRITE (22) dx,eta,hu,ho
	371	DEALLOCATE( eta, ho, hu )
	372	!
	373	!-- Create output file for local parameters
[102]	374	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	375	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	376	openfile(28)%opened = .TRUE.
	377
	378	ENDIF
	379
	380	CASE ( 23 )
	381
	382	IF ( data_output_2d_on_each_pe ) THEN
[105]	383	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	384	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	385	ELSE
[102]	386	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	387	POSITION='APPEND' )
	388	ENDIF
	389
	390	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	391	!
	392	!-- Output for combine_plot_fields
	393	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	394	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	395	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	396	ENDIF
	397	!
	398	!-- Determine and write ISO2D coordiante header
	399	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	400	hu = 0.0
	401	ho = zu(nz+1)
	402	DO i = 1, nz
	403	eta(i) = REAL( zu(i) ) / zu(nz+1)
	404	ENDDO
	405	eta(0) = 0.0
	406	eta(nz+1) = 1.0
	407
	408	WRITE (23) dx,eta,hu,ho
	409	DEALLOCATE( eta, ho, hu )
	410	!
	411	!-- Create output file for local parameters
[102]	412	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	413	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	414	openfile(29)%opened = .TRUE.
	415
	416	ENDIF
	417
	418	CASE ( 30 )
	419
[105]	420	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	421	FORM='UNFORMATTED' )
[1]	422	!
	423	!-- Write coordinate file for AVS
	424	IF ( myid == 0 ) THEN
	425	#if defined( __parallel )
	426	!
	427	!-- Specifications for combine_plot_fields
	428	IF ( .NOT. do3d_compress ) THEN
[667]	429	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
[1]	430	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	431	ENDIF
	432	#endif
	433	!
	434	!-- Write coordinate file for AVS:
	435	!-- First determine file names (including cyle numbers) of AVS files on
	436	!-- target machine (to which the files are to be transferred).
	437	!-- Therefore path information has to be obtained first.
	438	IF ( avs_output ) THEN
[82]	439	iaddres = LEN_TRIM( return_addres )
	440	iusern = LEN_TRIM( return_username )
[1]	441
	442	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	443	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	444	.NOT. avs_data_file_found )
	445
	446	READ ( 3, '(A)', END=1 ) zeile
	447
	448	SELECT CASE ( zeile(1:11) )
	449
	450	CASE ( 'PLOT3D_COOR' )
	451	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	452	avs_coor_file_localname
	453	avs_coor_file_found = .TRUE.
	454
	455	CASE ( 'PLOT3D_DATA' )
	456	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	457	avs_data_file_localname
	458	avs_data_file_found = .TRUE.
	459
	460	CASE DEFAULT
	461	READ ( 3, '(A/A)' ) zeile, zeile
	462
	463	END SELECT
	464
	465	ENDDO
	466	!
	467	!-- Now the cycle numbers on the remote machine must be obtained
	468	!-- using batch_scp
	469	1 CLOSE ( 3 )
	470	IF ( .NOT. avs_coor_file_found .OR. &
	471	.NOT. avs_data_file_found ) THEN
[274]	472	message_string= 'no filename for AVS-data-file ' // &
	473	'found in MRUN-config-file' // &
[247]	474	' &filename in FLD-file set to "unknown"'
	475	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	476
	477	avs_coor_file = 'unknown'
	478	avs_data_file = 'unknown'
	479	ELSE
	480	get_filenames = .TRUE.
	481	IF ( TRIM( host ) == 'hpmuk' .OR. &
	482	TRIM( host ) == 'lcmuk' ) THEN
	483	batch_scp = '/home/raasch/pub/batch_scp'
	484	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	485	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	486	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	487	TRIM( host ) == 'ibmb' ) THEN
	488	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	489	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	490	batch_scp = '/home/nhbksira/pub/batch_scp'
	491	ELSE
[247]	492	message_string= 'no path for batch_scp on host "' // &
	493	TRIM( host ) // '"'
	494	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	495	get_filenames = .FALSE.
	496	ENDIF
	497
	498	IF ( get_filenames ) THEN
	499	!
	500	!-- Determine the coordinate file name.
	501	!-- /etc/passwd serves as Dummy-Datei, because it is not
	502	!-- really transferred.
	503	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	504	return_username(1:iusern) // ' ' // &
[1]	505	return_addres(1:iaddres) // ' /etc/passwd "' // &
	506	TRIM( avs_coor_file_catalog ) // '" ' // &
	507	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	508
	509	CALL local_system( command )
	510	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	511	READ ( 3, '(A)' ) avs_coor_file
	512	CLOSE ( 3 )
	513	!
	514	!-- Determine the data file name
	515	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	516	return_username(1:iusern) // ' ' // &
[1]	517	return_addres(1:iaddres) // ' /etc/passwd "' // &
	518	TRIM( avs_data_file_catalog ) // '" ' // &
	519	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	520
	521	CALL local_system( command )
	522	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	523	READ ( 3, '(A)' ) avs_data_file
	524	CLOSE ( 3 )
	525
	526	ELSE
	527
	528	avs_coor_file = 'unknown'
	529	avs_data_file = 'unknown'
	530
	531	ENDIF
	532
	533	ENDIF
	534
	535	!
	536	!-- Output of the coordinate file description for FLD-file
	537	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	538	openfile(33)%opened = .TRUE.
	539	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
[667]	540	TRIM( avs_coor_file ), (nx+2nbgp)4, &
	541	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
[1]	542
	543
	544	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	545	DO i = 0, nx+1
	546	xkoor(i) = i * dx
	547	ENDDO
	548	DO j = 0, ny+1
	549	ykoor(j) = j * dy
	550	ENDDO
	551	DO k = 0, nz_do3d
	552	zkoor(k) = zu(k)
	553	ENDDO
	554
	555	!
	556	!-- Create and write on AVS coordinate file
	557	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	558	openfile(31)%opened = .TRUE.
	559
	560	WRITE (31) xkoor, ykoor, zkoor
	561	DEALLOCATE( xkoor, ykoor, zkoor )
	562
	563	!
	564	!-- Create FLD file (being written on in close_file)
	565	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	566	openfile(32)%opened = .TRUE.
	567
	568	!
	569	!-- Create flag file for compressed 3D output,
	570	!-- influences output commands in mrun
	571	IF ( do3d_compress ) THEN
	572	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	573	WRITE ( 3, '(1X)' )
	574	CLOSE ( 3 )
	575	ENDIF
	576
	577	ENDIF
	578
	579	ENDIF
	580
	581	!
	582	!-- In case of data compression output of the coordinates of the
	583	!-- corresponding partial array of a PE only once at the top of the file
	584	IF ( avs_output .AND. do3d_compress ) THEN
[667]	585	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
[1]	586	ENDIF
	587
	588	CASE ( 50:59 )
	589
	590	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	591	suffix = ''
	592	ELSE
	593	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	594	ENDIF
[105]	595	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	596	TRIM( suffix ), &
[102]	597	FORM='FORMATTED', RECL=496 )
[1]	598	!
	599	!-- Write PROFIL parameter file for output of time series
	600	!-- NOTE: To be on the safe side, this output is done at the beginning of
	601	!-- the model run (in case of collapse) and it is repeated in
	602	!-- close_file, then, however, with value ranges for the coordinate
	603	!-- systems
	604	!
	605	!-- Firstly determine the number of the coordinate systems to be drawn
	606	cranz = 0
	607	DO j = 1, 10
	608	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	609	ENDDO
	610	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	611	TRIM( region( file_id - 50 ) )
	612	!
	613	!-- Write RAHMEN parameter
[105]	614	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	615	TRIM( suffix ), &
[102]	616	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	617	WRITE ( 90, RAHMEN )
	618	!
	619	!-- Determine and write CROSS parameters for the individual coordinate
	620	!-- systems
	621	DO j = 1, 10
	622	k = cross_ts_number_count(j)
	623	IF ( k /= 0 ) THEN
	624	!
	625	!-- Store curve numbers, colours and line style
	626	klist(1:k) = cross_ts_numbers(1:k,j)
	627	klist(k+1:10) = 999999
	628	!
	629	!-- Write CROSS parameter
	630	WRITE ( 90, CROSS )
	631
	632	ENDIF
	633	ENDDO
	634
	635	CLOSE ( 90 )
	636	!
	637	!-- Write all labels at the top of the data file, but only during the
	638	!-- first run of a sequence of jobs. The following jobs copy the time
	639	!-- series data to the bottom of that file.
	640	IF ( runnr == 0 ) THEN
	641	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	642	' ' // TRIM( region( file_id - 50 ) )
	643	ENDIF
	644
	645
	646	CASE ( 80 )
	647
	648	IF ( myid_char == '' ) THEN
[105]	649	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	650	FORM='FORMATTED', POSITION='APPEND' )
[1]	651	ELSE
	652	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	653	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	654	ENDIF
[809]	655	#if defined( __parallel ) && ! defined ( __check )
[1]	656	!
	657	!-- Set a barrier in order to allow that thereafter all other
	658	!-- processors in the directory created by PE0 can open their file.
	659	!-- WARNING: The following barrier will lead to hanging jobs, if
	660	!-- check_open is first called from routine
	661	!-- allocate_prt_memory!
	662	IF ( .NOT. openfile(80)%opened_before ) THEN
	663	CALL MPI_BARRIER( comm2d, ierr )
	664	ENDIF
	665	#endif
[105]	666	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	667	myid_char, &
[102]	668	FORM='FORMATTED', POSITION='APPEND' )
[1]	669	ENDIF
	670
	671	IF ( .NOT. openfile(80)%opened_before ) THEN
	672	WRITE ( 80, 8000 ) TRIM( run_description_header )
	673	ENDIF
	674
	675	CASE ( 81 )
	676
[102]	677	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	678	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	679
	680	CASE ( 82 )
	681
[102]	682	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	683	POSITION = 'APPEND' )
	684
	685	CASE ( 83 )
	686
[102]	687	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	688	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	689
	690	CASE ( 84 )
	691
[102]	692	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	693	POSITION='APPEND' )
	694
	695	CASE ( 85 )
	696
	697	IF ( myid_char == '' ) THEN
[105]	698	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	699	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	700	ELSE
	701	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	702	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	703	ENDIF
[809]	704	#if defined( __parallel ) && ! defined ( __check )
[1]	705	!
	706	!-- Set a barrier in order to allow that thereafter all other
	707	!-- processors in the directory created by PE0 can open their file
	708	CALL MPI_BARRIER( comm2d, ierr )
	709	#endif
[105]	710	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	711	myid_char, &
[102]	712	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	713	ENDIF
	714
	715	IF ( .NOT. openfile(85)%opened_before ) THEN
	716	WRITE ( 85 ) run_description_header
	717	!
	718	!-- Attention: change version number whenever the output format on
[849]	719	!-- unit 85 is changed (see also in routine
	720	!-- lpm_data_output_particles)
[1]	721	rtext = 'data format version 3.0'
	722	WRITE ( 85 ) rtext
	723	WRITE ( 85 ) number_of_particle_groups, &
	724	max_number_of_particle_groups
	725	WRITE ( 85 ) particle_groups
	726	ENDIF
	727
	728	#if defined( __netcdf )
	729	CASE ( 101, 111 )
	730	!
	731	!-- Set filename depending on unit number
	732	IF ( file_id == 101 ) THEN
[102]	733	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	734	av = 0
	735	ELSE
[102]	736	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	737	av = 1
	738	ENDIF
	739	!
	740	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	741	!-- be opened for extension, if its dimensions and variables match the
	742	!-- actual run.
	743	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	744
	745	IF ( netcdf_extend ) THEN
	746	!
[493]	747	!-- Open an existing NetCDF file for output
[600]	748	IF ( netcdf_data_format < 3 ) THEN
	749	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
	750	ELSE
[493]	751	#if defined( __netcdf4 )
[600]	752	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
	753	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	754	#endif
[600]	755	ENDIF
[263]	756
	757	CALL handle_netcdf_error( 'check_open', 20 )
[1]	758	!
	759	!-- Read header information and set all ids. If there is a mismatch
	760	!-- between the previuos and the actual run, netcdf_extend is returned
	761	!-- as .FALSE.
	762	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	763
	764	!
	765	!-- Remove the local file, if it can not be extended
	766	IF ( .NOT. netcdf_extend ) THEN
	767	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	768	CALL handle_netcdf_error( 'check_open', 21 )
[493]	769	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	770	ENDIF
	771
	772	ENDIF
	773
	774	IF ( .NOT. netcdf_extend ) THEN
	775	!
[493]	776	!-- Create a new NetCDF output file with requested NetCDF format
	777	IF ( netcdf_data_format == 1 ) THEN
	778	!
	779	!-- Classic NetCDF format
	780	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	781
	782	ELSEIF ( netcdf_data_format == 2 ) THEN
	783	!
	784	!-- 64bit-offset format
[1]	785	nc_stat = NF90_CREATE( filename, &
	786	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	787	id_set_xy(av) )
[247]	788
[493]	789	#if defined( __netcdf4 )
	790	ELSEIF ( netcdf_data_format == 3 ) THEN
	791	!
	792	!-- NetCDF4/HDF5 format
	793	nc_stat = NF90_CREATE( filename, &
	794	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	795	id_set_xy(av), COMM = comm2d, &
	796	INFO = MPI_INFO_NULL )
	797
	798	ELSEIF ( netcdf_data_format == 4 ) THEN
	799	!
	800	!-- NetCDF4/HDF5 format with classic model flag
	801	nc_stat = NF90_CREATE( filename, &
	802	OR( NF90_NOCLOBBER, &
	803	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	804	id_set_xy(av), COMM = comm2d, &
	805	INFO = MPI_INFO_NULL )
[1]	806	#endif
	807	ENDIF
[493]	808
[263]	809	CALL handle_netcdf_error( 'check_open', 22 )
[493]	810
[1]	811	!
	812	!-- Define the header
	813	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	814
[493]	815	!
	816	!-- In case of parallel NetCDF output, create flag file which tells
	817	!-- combine_plot_fields that nothing is to do.
	818	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	819	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	820	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	821	CLOSE( 99 )
	822	ENDIF
	823
[1]	824	ENDIF
	825
	826	CASE ( 102, 112 )
	827	!
	828	!-- Set filename depending on unit number
	829	IF ( file_id == 102 ) THEN
[102]	830	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	831	av = 0
	832	ELSE
[102]	833	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	834	av = 1
	835	ENDIF
	836	!
	837	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	838	!-- be opened for extension, if its dimensions and variables match the
	839	!-- actual run.
	840	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	841
	842	IF ( netcdf_extend ) THEN
	843	!
[600]	844	!-- Open an existing NetCDF file for output
	845	IF ( netcdf_data_format < 3 ) THEN
	846	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
	847	ELSE
[493]	848	#if defined( __netcdf4 )
[600]	849	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
	850	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	851	#endif
[600]	852	ENDIF
	853
[263]	854	CALL handle_netcdf_error( 'check_open', 23 )
[1]	855	!
	856	!-- Read header information and set all ids. If there is a mismatch
	857	!-- between the previuos and the actual run, netcdf_extend is returned
	858	!-- as .FALSE.
	859	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	860
	861	!
	862	!-- Remove the local file, if it can not be extended
	863	IF ( .NOT. netcdf_extend ) THEN
	864	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	865	CALL handle_netcdf_error( 'check_open', 24 )
[493]	866	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	867	ENDIF
	868
	869	ENDIF
	870
	871	IF ( .NOT. netcdf_extend ) THEN
	872	!
[493]	873	!-- Create a new NetCDF output file with requested NetCDF format
	874	IF ( netcdf_data_format == 1 ) THEN
	875	!
	876	!-- Classic NetCDF format
	877	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	878
	879	ELSEIF ( netcdf_data_format == 2 ) THEN
	880	!
	881	!-- 64bit-offset format
[1]	882	nc_stat = NF90_CREATE( filename, &
	883	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	884	id_set_xz(av) )
[493]	885
	886	#if defined( __netcdf4 )
	887	ELSEIF ( netcdf_data_format == 3 ) THEN
	888	!
	889	!-- NetCDF4/HDF5 format
	890	nc_stat = NF90_CREATE( filename, &
	891	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	892	id_set_xz(av), COMM = comm2d, &
	893	INFO = MPI_INFO_NULL )
	894
	895	ELSEIF ( netcdf_data_format == 4 ) THEN
	896	!
	897	!-- NetCDF4/HDF5 format with classic model flag
	898	nc_stat = NF90_CREATE( filename, &
	899	OR( NF90_NOCLOBBER, &
	900	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	901	id_set_xz(av), COMM = comm2d, &
	902	INFO = MPI_INFO_NULL )
[1]	903	#endif
	904	ENDIF
[493]	905
[263]	906	CALL handle_netcdf_error( 'check_open', 25 )
[493]	907
[1]	908	!
	909	!-- Define the header
	910	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	911
[493]	912	!
	913	!-- In case of parallel NetCDF output, create flag file which tells
	914	!-- combine_plot_fields that nothing is to do.
	915	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	916	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	917	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	918	CLOSE( 99 )
	919	ENDIF
	920
[1]	921	ENDIF
	922
	923	CASE ( 103, 113 )
	924	!
	925	!-- Set filename depending on unit number
	926	IF ( file_id == 103 ) THEN
[102]	927	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	928	av = 0
	929	ELSE
[102]	930	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	931	av = 1
	932	ENDIF
	933	!
	934	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	935	!-- be opened for extension, if its dimensions and variables match the
	936	!-- actual run.
	937	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	938
	939	IF ( netcdf_extend ) THEN
	940	!
[600]	941	!-- Open an existing NetCDF file for output
	942	IF ( netcdf_data_format < 3 ) THEN
	943	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
	944	ELSE
[493]	945	#if defined( __netcdf4 )
[600]	946	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
	947	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	948	#endif
[600]	949	ENDIF
[667]	950
[263]	951	CALL handle_netcdf_error( 'check_open', 26 )
[1]	952	!
	953	!-- Read header information and set all ids. If there is a mismatch
	954	!-- between the previuos and the actual run, netcdf_extend is returned
	955	!-- as .FALSE.
	956	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	957
	958	!
	959	!-- Remove the local file, if it can not be extended
	960	IF ( .NOT. netcdf_extend ) THEN
	961	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	962	CALL handle_netcdf_error( 'check_open', 27 )
[493]	963	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	964	ENDIF
	965
	966	ENDIF
	967
	968	IF ( .NOT. netcdf_extend ) THEN
	969	!
[493]	970	!-- Create a new NetCDF output file with requested NetCDF format
	971	IF ( netcdf_data_format == 1 ) THEN
	972	!
	973	!-- Classic NetCDF format
	974	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	975
	976	ELSEIF ( netcdf_data_format == 2 ) THEN
	977	!
	978	!-- 64bit-offset format
[1]	979	nc_stat = NF90_CREATE( filename, &
[493]	980	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
[1]	981	id_set_yz(av) )
[493]	982
	983	#if defined( __netcdf4 )
	984	ELSEIF ( netcdf_data_format == 3 ) THEN
	985	!
	986	!-- NetCDF4/HDF5 format
	987	nc_stat = NF90_CREATE( filename, &
	988	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	989	id_set_yz(av), COMM = comm2d, &
	990	INFO = MPI_INFO_NULL )
	991
	992	ELSEIF ( netcdf_data_format == 4 ) THEN
	993	!
	994	!-- NetCDF4/HDF5 format with classic model flag
	995	nc_stat = NF90_CREATE( filename, &
	996	OR( NF90_NOCLOBBER, &
	997	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	998	id_set_yz(av), COMM = comm2d, &
	999	INFO = MPI_INFO_NULL )
[1]	1000	#endif
	1001	ENDIF
[493]	1002
[263]	1003	CALL handle_netcdf_error( 'check_open', 28 )
[493]	1004
[1]	1005	!
	1006	!-- Define the header
	1007	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	1008
[493]	1009	!
	1010	!-- In case of parallel NetCDF output, create flag file which tells
	1011	!-- combine_plot_fields that nothing is to do.
	1012	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	1013	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	1014	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1015	CLOSE( 99 )
	1016	ENDIF
	1017
[1]	1018	ENDIF
	1019
	1020	CASE ( 104 )
	1021	!
[102]	1022	!-- Set filename
	1023	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	1024
	1025	!
[1]	1026	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1027	!-- be opened for extension, if its variables match the actual run.
[102]	1028	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1029
	1030	IF ( netcdf_extend ) THEN
	1031	!
	1032	!-- Open an existing NetCDF file for output
[102]	1033	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
[263]	1034	CALL handle_netcdf_error( 'check_open', 29 )
[1]	1035	!
	1036	!-- Read header information and set all ids. If there is a mismatch
	1037	!-- between the previuos and the actual run, netcdf_extend is returned
	1038	!-- as .FALSE.
	1039	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1040
	1041	!
	1042	!-- Remove the local file, if it can not be extended
	1043	IF ( .NOT. netcdf_extend ) THEN
	1044	nc_stat = NF90_CLOSE( id_set_pr )
[263]	1045	CALL handle_netcdf_error( 'check_open', 30 )
[102]	1046	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1047	ENDIF
	1048
	1049	ENDIF
	1050
	1051	IF ( .NOT. netcdf_extend ) THEN
	1052	!
	1053	!-- Create a new NetCDF output file
[493]	1054	IF ( netcdf_data_format > 1 ) THEN
[102]	1055	nc_stat = NF90_CREATE( filename, &
[1]	1056	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1057	id_set_pr )
	1058	ELSE
[102]	1059	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	1060	ENDIF
[263]	1061	CALL handle_netcdf_error( 'check_open', 31 )
[1]	1062	!
	1063	!-- Define the header
	1064	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1065
	1066	ENDIF
	1067
	1068	CASE ( 105 )
	1069	!
[102]	1070	!-- Set filename
	1071	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	1072
	1073	!
[1]	1074	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1075	!-- be opened for extension, if its variables match the actual run.
[102]	1076	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1077
	1078	IF ( netcdf_extend ) THEN
	1079	!
	1080	!-- Open an existing NetCDF file for output
[102]	1081	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
[263]	1082	CALL handle_netcdf_error( 'check_open', 32 )
[1]	1083	!
	1084	!-- Read header information and set all ids. If there is a mismatch
	1085	!-- between the previuos and the actual run, netcdf_extend is returned
	1086	!-- as .FALSE.
	1087	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1088
	1089	!
	1090	!-- Remove the local file, if it can not be extended
	1091	IF ( .NOT. netcdf_extend ) THEN
	1092	nc_stat = NF90_CLOSE( id_set_ts )
[263]	1093	CALL handle_netcdf_error( 'check_open', 33 )
[102]	1094	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1095	ENDIF
	1096
	1097	ENDIF
	1098
	1099	IF ( .NOT. netcdf_extend ) THEN
	1100	!
	1101	!-- Create a new NetCDF output file
[493]	1102	IF ( netcdf_data_format > 1 ) THEN
[102]	1103	nc_stat = NF90_CREATE( filename, &
[1]	1104	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1105	id_set_ts )
	1106	ELSE
[102]	1107	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	1108	ENDIF
[263]	1109	CALL handle_netcdf_error( 'check_open', 34 )
[1]	1110	!
	1111	!-- Define the header
	1112	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1113
	1114	ENDIF
	1115
	1116
	1117	CASE ( 106, 116 )
	1118	!
	1119	!-- Set filename depending on unit number
	1120	IF ( file_id == 106 ) THEN
[102]	1121	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	1122	av = 0
	1123	ELSE
[102]	1124	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	1125	av = 1
	1126	ENDIF
	1127	!
[493]	1128	!-- Inquire, if there is a NetCDF file from a previous run. This should
[1]	1129	!-- be opened for extension, if its dimensions and variables match the
	1130	!-- actual run.
	1131	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1132
	1133	IF ( netcdf_extend ) THEN
	1134	!
[493]	1135	!-- Open an existing NetCDF file for output
[765]	1136	IF ( netcdf_data_format < 3 ) THEN
	1137	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
	1138	ELSE
[493]	1139	#if defined( __netcdf4 )
[765]	1140	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
	1141	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	1142	#endif
[765]	1143	ENDIF
[263]	1144	CALL handle_netcdf_error( 'check_open', 35 )
[1]	1145	!
	1146	!-- Read header information and set all ids. If there is a mismatch
	1147	!-- between the previuos and the actual run, netcdf_extend is returned
	1148	!-- as .FALSE.
	1149	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1150
	1151	!
	1152	!-- Remove the local file, if it can not be extended
	1153	IF ( .NOT. netcdf_extend ) THEN
	1154	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1155	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1156	CALL local_system('rm ' // TRIM( filename ) )
	1157	ENDIF
	1158
	1159	ENDIF
	1160
	1161	IF ( .NOT. netcdf_extend ) THEN
	1162	!
[493]	1163	!-- Create a new NetCDF output file with requested NetCDF format
	1164	IF ( netcdf_data_format == 1 ) THEN
	1165	!
	1166	!-- Classic NetCDF format
	1167	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1168
	1169	ELSEIF ( netcdf_data_format == 2 ) THEN
	1170	!
	1171	!-- 64bit-offset format
[1]	1172	nc_stat = NF90_CREATE( filename, &
	1173	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1174	id_set_3d(av) )
[493]	1175
	1176	#if defined( __netcdf4 )
	1177	ELSEIF ( netcdf_data_format == 3 ) THEN
	1178	!
	1179	!-- NetCDF4/HDF5 format
	1180	nc_stat = NF90_CREATE( filename, &
	1181	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1182	id_set_3d(av), COMM = comm2d, &
	1183	INFO = MPI_INFO_NULL )
	1184
	1185	ELSEIF ( netcdf_data_format == 4 ) THEN
	1186	!
	1187	!-- NetCDF4/HDF5 format with classic model flag
	1188	nc_stat = NF90_CREATE( filename, &
	1189	OR( NF90_NOCLOBBER, &
	1190	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1191	id_set_3d(av), COMM = comm2d, &
	1192	INFO = MPI_INFO_NULL )
[1]	1193	#endif
	1194	ENDIF
[493]	1195
[263]	1196	CALL handle_netcdf_error( 'check_open', 37 )
[493]	1197
[1]	1198	!
	1199	!-- Define the header
	1200	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1201
[493]	1202	!
	1203	!-- In case of parallel NetCDF output, create flag file which tells
	1204	!-- combine_plot_fields that nothing is to do.
	1205	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	1206	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1207	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1208	CLOSE( 99 )
	1209	ENDIF
	1210
[1]	1211	ENDIF
	1212
	1213
	1214	CASE ( 107 )
	1215	!
[102]	1216	!-- Set filename
	1217	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1218
	1219	!
[1]	1220	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1221	!-- be opened for extension, if its variables match the actual run.
[102]	1222	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1223
	1224	IF ( netcdf_extend ) THEN
	1225	!
	1226	!-- Open an existing NetCDF file for output
[102]	1227	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
[263]	1228	CALL handle_netcdf_error( 'check_open', 38 )
	1229
[1]	1230	!
	1231	!-- Read header information and set all ids. If there is a mismatch
	1232	!-- between the previuos and the actual run, netcdf_extend is returned
	1233	!-- as .FALSE.
	1234	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1235
	1236	!
	1237	!-- Remove the local file, if it can not be extended
	1238	IF ( .NOT. netcdf_extend ) THEN
	1239	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1240	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1241	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1242	ENDIF
	1243
	1244	ENDIF
	1245
	1246	IF ( .NOT. netcdf_extend ) THEN
	1247	!
	1248	!-- Create a new NetCDF output file
[493]	1249	IF ( netcdf_data_format > 1 ) THEN
[102]	1250	nc_stat = NF90_CREATE( filename, &
[1]	1251	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1252	id_set_sp )
	1253	ELSE
[102]	1254	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1255	ENDIF
[263]	1256	CALL handle_netcdf_error( 'check_open', 40 )
[1]	1257	!
	1258	!-- Define the header
	1259	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1260
	1261	ENDIF
	1262
	1263
	1264	CASE ( 108 )
	1265
	1266	IF ( myid_char == '' ) THEN
[102]	1267	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1268	ELSE
[105]	1269	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1270	myid_char
[1]	1271	ENDIF
	1272	!
	1273	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1274	!-- be opened for extension, if its variables match the actual run.
	1275	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1276
	1277	IF ( netcdf_extend ) THEN
	1278	!
	1279	!-- Open an existing NetCDF file for output
	1280	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
[263]	1281	CALL handle_netcdf_error( 'check_open', 41 )
[1]	1282	!
	1283	!-- Read header information and set all ids. If there is a mismatch
	1284	!-- between the previuos and the actual run, netcdf_extend is returned
	1285	!-- as .FALSE.
	1286	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1287
	1288	!
	1289	!-- Remove the local file, if it can not be extended
	1290	IF ( .NOT. netcdf_extend ) THEN
	1291	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1292	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1293	CALL local_system( 'rm ' // filename )
	1294	ENDIF
	1295
	1296	ENDIF
	1297
	1298	IF ( .NOT. netcdf_extend ) THEN
	1299
	1300	!
	1301	!-- For runs on multiple processors create the subdirectory
	1302	IF ( myid_char /= '' ) THEN
	1303	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1304	THEN ! needs modification in case of non-extendable sets
[102]	1305	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1306	TRIM( coupling_char ) // '/' )
[1]	1307	ENDIF
[809]	1308	#if defined( __parallel ) && ! defined ( __check )
[807]	1309	!
[1]	1310	!-- Set a barrier in order to allow that all other processors in the
	1311	!-- directory created by PE0 can open their file
	1312	CALL MPI_BARRIER( comm2d, ierr )
	1313	#endif
	1314	ENDIF
	1315
	1316	!
[519]	1317	!-- Create a new NetCDF output file with requested NetCDF format
	1318	IF ( netcdf_data_format == 1 ) THEN
	1319	!
	1320	!-- Classic NetCDF format
	1321	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1322
	1323	ELSEIF ( netcdf_data_format == 2 ) THEN
	1324	!
	1325	!-- 64bit-offset format
[1]	1326	nc_stat = NF90_CREATE( filename, &
	1327	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1328	id_set_prt )
[519]	1329
	1330	#if defined( __netcdf4 )
	1331	ELSEIF ( netcdf_data_format == 3 ) THEN
	1332	!
	1333	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
	1334	nc_stat = NF90_CREATE( filename, &
	1335	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1336	id_set_prt )
	1337
	1338	ELSEIF ( netcdf_data_format == 4 ) THEN
	1339	!
	1340	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
	1341	!-- output into a single file!
	1342	nc_stat = NF90_CREATE( filename, &
	1343	OR( NF90_NOCLOBBER, &
	1344	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1345	id_set_prt )
	1346	#endif
[1]	1347	ENDIF
[667]	1348
[263]	1349	CALL handle_netcdf_error( 'check_open', 43 )
[1]	1350
	1351	!
	1352	!-- Define the header
	1353	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1354
	1355	ENDIF
	1356
	1357	CASE ( 109 )
	1358	!
[102]	1359	!-- Set filename
	1360	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1361
	1362	!
[1]	1363	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1364	!-- be opened for extension, if its variables match the actual run.
[102]	1365	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1366
	1367	IF ( netcdf_extend ) THEN
	1368	!
	1369	!-- Open an existing NetCDF file for output
[102]	1370	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
[263]	1371	CALL handle_netcdf_error( 'check_open', 393 )
[1]	1372	!
	1373	!-- Read header information and set all ids. If there is a mismatch
	1374	!-- between the previuos and the actual run, netcdf_extend is returned
	1375	!-- as .FALSE.
	1376	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1377
	1378	!
	1379	!-- Remove the local file, if it can not be extended
	1380	IF ( .NOT. netcdf_extend ) THEN
	1381	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1382	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1383	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1384	ENDIF
	1385
	1386	ENDIF
	1387
	1388	IF ( .NOT. netcdf_extend ) THEN
	1389	!
	1390	!-- Create a new NetCDF output file
[493]	1391	IF ( netcdf_data_format > 1 ) THEN
[102]	1392	nc_stat = NF90_CREATE( filename, &
[1]	1393	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1394	id_set_pts )
	1395	ELSE
[102]	1396	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1397	ENDIF
[263]	1398	CALL handle_netcdf_error( 'check_open', 395 )
[1]	1399	!
	1400	!-- Define the header
	1401	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1402
	1403	ENDIF
[410]	1404
[564]	1405	CASE ( 201:200+2*max_masks )
[410]	1406	!
	1407	!-- Set filename depending on unit number
[564]	1408	IF ( file_id <= 200+max_masks ) THEN
	1409	mid = file_id - 200
[410]	1410	WRITE ( mask_char,'(I2.2)') mid
	1411	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
	1412	av = 0
	1413	ELSE
[564]	1414	mid = file_id - (200+max_masks)
[410]	1415	WRITE ( mask_char,'(I2.2)') mid
	1416	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
	1417	coupling_char
	1418	av = 1
	1419	ENDIF
	1420	!
	1421	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1422	!-- be opened for extension, if its dimensions and variables match the
	1423	!-- actual run.
	1424	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1425
	1426	IF ( netcdf_extend ) THEN
	1427	!
	1428	!-- Open an existing NetCDF file for output
	1429	#if defined( __netcdf4 )
[493]	1430	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
	1431	COMM = comm2d, INFO = MPI_INFO_NULL )
[1]	1432	#else
[410]	1433	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
	1434	#endif
[564]	1435	CALL handle_netcdf_error( 'check_open', 456 )
[410]	1436	!
	1437	!-- Read header information and set all ids. If there is a mismatch
	1438	!-- between the previuos and the actual run, netcdf_extend is returned
	1439	!-- as .FALSE.
	1440	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
[1]	1441
[410]	1442	!
	1443	!-- Remove the local file, if it can not be extended
	1444	IF ( .NOT. netcdf_extend ) THEN
	1445	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[564]	1446	CALL handle_netcdf_error( 'check_open', 457 )
[410]	1447	CALL local_system('rm ' // TRIM( filename ) )
	1448	ENDIF
[1]	1449
[410]	1450	ENDIF
	1451
	1452	IF ( .NOT. netcdf_extend ) THEN
[1]	1453	!
[493]	1454	!-- Create a new NetCDF output file with requested NetCDF format
	1455	IF ( netcdf_data_format == 1 ) THEN
	1456	!
	1457	!-- Classic NetCDF format
	1458	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
	1459	id_set_mask(mid,av) )
[410]	1460
[493]	1461	ELSEIF ( netcdf_data_format == 2 ) THEN
	1462	!
	1463	!-- 64bit-offset format
	1464	nc_stat = NF90_CREATE( filename, &
	1465	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1466	id_set_mask(mid,av) )
[410]	1467
	1468
	1469	#if defined( __netcdf4 )
[493]	1470	ELSEIF ( netcdf_data_format == 3 ) THEN
	1471	!
	1472	!-- NetCDF4/HDF5 format
	1473	nc_stat = NF90_CREATE( filename, &
	1474	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1475	id_set_mask(mid,av), COMM = comm2d, &
	1476	INFO = MPI_INFO_NULL )
[410]	1477
[493]	1478	ELSEIF ( netcdf_data_format == 4 ) THEN
	1479	!
	1480	!-- NetCDF4/HDF5 format with classic model flag
	1481	nc_stat = NF90_CREATE( filename, &
	1482	OR( NF90_NOCLOBBER, &
	1483	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1484	id_set_mask(mid,av), COMM = comm2d, &
	1485	INFO = MPI_INFO_NULL )
[410]	1486	#endif
[493]	1487	ENDIF
[410]	1488
[564]	1489	CALL handle_netcdf_error( 'check_open', 458 )
[410]	1490	!
	1491	!-- Define the header
	1492	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
	1493
	1494	ENDIF
	1495
	1496
	1497	#else
	1498
[564]	1499	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1500
	1501	!
[1]	1502	!-- Nothing is done in case of missing netcdf support
	1503	RETURN
	1504
	1505	#endif
	1506
	1507	CASE DEFAULT
	1508
[247]	1509	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1510	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1511
	1512	END SELECT
	1513
	1514	!
	1515	!-- Set open flag
	1516	openfile(file_id)%opened = .TRUE.
	1517
	1518	!
	1519	!-- Formats
	1520	3300 FORMAT ('#'/ &
	1521	'coord 1 file=',A,' filetype=unformatted'/ &
	1522	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1523	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1524	'#')
	1525	4000 FORMAT ('# ',A)
	1526	5000 FORMAT ('# ',A/ &
	1527	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1528	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1529	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1530	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1531	8000 FORMAT (A/ &
	1532	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1533	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1534	103('-'))
	1535
	1536	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |