Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 858

Last change on this file since 858 was 850, checked in by raasch, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 56.9 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
	3	!------------------------------------------------------------------------------!
[247]	4	! Current revisions:
[1]	5	! -----------------
	6	!
[810]	7	!
[1]	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: check_open.f90 850 2012-03-15 12:09:25Z suehring $
[810]	11	!
[850]	12	! 849 2012-03-15 10:35:09Z raasch
	13	! comment changed
	14	!
[810]	15	! 809 2012-01-30 13:32:58Z maronga
	16	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	17	!
[808]	18	! 807 2012-01-25 11:53:51Z maronga
	19	! New cpp directive "__check" implemented which is used by check_namelist_files
	20	!
[766]	21	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
[77]	22	!
[668]	23	! 667 2010-12-23 12:06:00Z suehring/gryschka
	24	! Output of total array size was adapted to nbgp.
	25	!
[601]	26	! 600 2010-11-24 16:10:51Z raasch
	27	! bugfix in opening of cross section netcdf-files (parallel opening with
	28	! netcdf4 only works for netcdf_data_format > 2)
	29	!
[565]	30	! 564 2010-09-30 13:18:59Z helmke
	31	! start number of mask output files changed to 201, netcdf message identifiers
	32	! of masked output changed
	33	!
[520]	34	! 519 2010-03-19 05:30:02Z raasch
	35	! NetCDF4 support for particle data
	36	!
[494]	37	! 493 2010-03-01 08:30:24Z raasch
	38	! NetCDF4 support (parallel output)
	39	!
[449]	40	! 410 2009-12-04 17:05:40Z letzel
	41	! masked data output
	42	!
[392]	43	! 277 2009-03-31 09:13:47Z heinze
	44	! Output of NetCDF messages with aid of message handling routine.
	45	! Output of messages replaced by message handling routine
	46	!
[198]	47	! 146 2008-01-17 13:08:34Z raasch
	48	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	49	! because only this file contains the global variables,
	50	! myid_char_14 removed
	51	!
[139]	52	! 120 2007-10-17 11:54:43Z raasch
	53	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
	54	!
[110]	55	! 105 2007-08-08 07:12:55Z raasch
	56	! Different filenames are used in case of a coupled simulation,
	57	! coupling_char added to all relevant filenames
	58	!
[83]	59	! 82 2007-04-16 15:40:52Z raasch
	60	! Call of local_getenv removed, preprocessor directives for old systems removed
	61	!
[77]	62	! 46 2007-03-05 06:00:47Z raasch
	63	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	64	!
[3]	65	! RCS Log replace by Id keyword, revision history cleaned up
	66	!
[1]	67	! Revision 1.44 2006/08/22 13:48:34 raasch
	68	! xz and yz cross sections now up to nzt+1
	69	!
	70	! Revision 1.1 1997/08/11 06:10:55 raasch
	71	! Initial revision
	72	!
	73	!
	74	! Description:
	75	! ------------
	76	! Check if file unit is open. If not, open file and, if necessary, write a
	77	! header or start other initializing actions, respectively.
	78	!------------------------------------------------------------------------------!
	79
	80	USE array_kind
	81	USE arrays_3d
	82	USE control_parameters
	83	USE grid_variables
	84	USE indices
	85	USE netcdf_control
	86	USE particle_attributes
	87	USE pegrid
	88	USE profil_parameter
	89	USE statistics
	90
	91	IMPLICIT NONE
	92
[410]	93	CHARACTER (LEN=2) :: mask_char, suffix
[82]	94	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	95	CHARACTER (LEN=30) :: filename
	96	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	97	avs_data_file_localname
	98	CHARACTER (LEN=80) :: rtext
	99	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	100	batch_scp, zeile
	101	CHARACTER (LEN=400) :: command
	102
	103	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
	104	j, k, legpos = 1, timodex = 1
	105	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
	106
	107	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	108	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	109	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	110
	111	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	112	sizex = 250.0, sizey = 40.0, texfac = 1.5
	113
	114	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	115	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	116
	117
	118	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
	119	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
	120	rand, rlegfak, sizex, sizey, texfac, &
	121	timodex, twoxa, twoya, xtext
	122
	123
	124	!
	125	!-- Immediate return if file already open
	126	IF ( openfile(file_id)%opened ) RETURN
	127
[809]	128	#if ! defined ( __check )
[1]	129	!
	130	!-- Only certain files are allowed to be re-opened
	131	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	132	!-- has not been checked so far, if it works!
	133	IF ( openfile(file_id)%opened_before ) THEN
	134	SELECT CASE ( file_id )
[143]	135	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	136	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	137	message_string = 're-open of unit ' // &
[274]	138	'14 is not verified. Please check results!'
[247]	139	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	140	ENDIF
[143]	141
[1]	142	CASE DEFAULT
[247]	143	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	144	' is not allowed'
[247]	145	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	146
[1]	147	RETURN
[143]	148
[1]	149	END SELECT
	150	ENDIF
[807]	151	#endif
[1]	152
	153	!
	154	!-- Check if file may be opened on the relevant PE
	155	SELECT CASE ( file_id )
	156
[493]	157	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
[410]	158
[493]	159	IF ( myid /= 0 ) THEN
	160	WRITE( message_string, * ) 'opening file-id ',file_id, &
	161	' not allowed for PE ',myid
	162	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	163	ENDIF
	164
[564]	165	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	166
	167	IF ( netcdf_data_format < 3 ) THEN
[247]	168
[410]	169	IF ( myid /= 0 ) THEN
	170	WRITE( message_string, * ) 'opening file-id ',file_id, &
	171	' not allowed for PE ',myid
	172	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	173	ENDIF
	174
[493]	175	ENDIF
[1]	176
	177	CASE ( 21, 22, 23 )
	178
	179	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	180	IF ( myid /= 0 ) THEN
[247]	181	WRITE( message_string, * ) 'opening file-id ',file_id, &
	182	' not allowed for PE ',myid
[277]	183	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	184	END IF
[1]	185	ENDIF
	186
	187	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	188
	189	!
	190	!-- File-ids that are used temporarily in other routines
[247]	191	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	192	' is not allowed since it is used otherwise'
[247]	193	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	194
[1]	195	END SELECT
	196
	197	!
	198	!-- Open relevant files
	199	SELECT CASE ( file_id )
	200
	201	CASE ( 11 )
	202
[807]	203	#if defined ( __check )
	204	!
	205	!-- In case of a prior parameter file check, the p3d data is stored in
	206	!-- PARIN, while the p3df is stored in PARINF. This only applies to
	207	!-- check_namelist_files!
	208	IF ( check_restart == 2 ) THEN
	209	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
	210	STATUS='OLD' )
	211	ELSE
	212	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	213	STATUS='OLD' )
	214	END IF
	215	#else
	216
[102]	217	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	218	STATUS='OLD' )
[807]	219	#endif
[1]	220
	221	CASE ( 13 )
	222
	223	IF ( myid_char == '' ) THEN
[102]	224	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	225	FORM='UNFORMATTED', STATUS='OLD' )
[1]	226	ELSE
[143]	227	!
	228	!-- First opening of unit 13 openes file _0000 on all PEs because only
	229	!-- this file contains the global variables
	230	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	231	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	232	FORM='UNFORMATTED', STATUS='OLD' )
	233	ELSE
	234	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	235	FORM='UNFORMATTED', STATUS='OLD' )
	236	ENDIF
[1]	237	ENDIF
	238
	239	CASE ( 14 )
	240
	241	IF ( myid_char == '' ) THEN
[102]	242	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	243	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	244	ELSE
	245	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	246	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	247	ENDIF
[809]	248	#if defined( __parallel ) && ! defined ( __check )
[1]	249	!
	250	!-- Set a barrier in order to allow that all other processors in the
	251	!-- directory created by PE0 can open their file
	252	CALL MPI_BARRIER( comm2d, ierr )
	253	#endif
[146]	254	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[102]	255	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	256	ENDIF
	257
	258	CASE ( 15 )
	259
[102]	260	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	261
	262	CASE ( 16 )
	263
[102]	264	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	265
	266	CASE ( 17 )
	267
[102]	268	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	269
	270	CASE ( 18 )
	271
[102]	272	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	273
	274	CASE ( 19 )
	275
[102]	276	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	277
	278	CASE ( 20 )
	279
	280	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	281	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	282	ENDIF
	283	IF ( myid_char == '' ) THEN
[105]	284	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	285	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	286	ELSE
[809]	287	#if defined( __parallel ) && ! defined ( __check )
[1]	288	!
	289	!-- Set a barrier in order to allow that all other processors in the
	290	!-- directory created by PE0 can open their file
	291	CALL MPI_BARRIER( comm2d, ierr )
	292	#endif
[105]	293	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	294	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	295	ENDIF
	296
	297	CASE ( 21 )
	298
	299	IF ( data_output_2d_on_each_pe ) THEN
[105]	300	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	301	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	302	ELSE
[102]	303	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	304	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	305	ENDIF
	306
	307	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	308	!
	309	!-- Output for combine_plot_fields
	310	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	311	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	312	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	313	ENDIF
	314	!
	315	!-- Determine and write ISO2D coordiante header
	316	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	317	hu = 0.0
	318	ho = (ny+1) * dy
	319	DO i = 1, ny
	320	eta(i) = REAL( i ) / ( ny + 1.0 )
	321	ENDDO
	322	eta(0) = 0.0
	323	eta(ny+1) = 1.0
	324
	325	WRITE (21) dx,eta,hu,ho
	326	DEALLOCATE( eta, ho, hu )
	327
	328	!
	329	!-- Create output file for local parameters
	330	IF ( iso2d_output ) THEN
[102]	331	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	332	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	333	openfile(27)%opened = .TRUE.
	334	ENDIF
	335
	336	ENDIF
	337
	338	CASE ( 22 )
	339
	340	IF ( data_output_2d_on_each_pe ) THEN
[105]	341	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	342	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	343	ELSE
[102]	344	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	345	POSITION='APPEND' )
	346	ENDIF
	347
	348	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	349	!
	350	!-- Output for combine_plot_fields
	351	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	352	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	353	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	354	ENDIF
	355	!
	356	!-- Determine and write ISO2D coordiante header
	357	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	358	hu = 0.0
	359	ho = zu(nz+1)
	360	DO i = 1, nz
	361	eta(i) = REAL( zu(i) ) / zu(nz+1)
	362	ENDDO
	363	eta(0) = 0.0
	364	eta(nz+1) = 1.0
	365
	366	WRITE (22) dx,eta,hu,ho
	367	DEALLOCATE( eta, ho, hu )
	368	!
	369	!-- Create output file for local parameters
[102]	370	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	371	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	372	openfile(28)%opened = .TRUE.
	373
	374	ENDIF
	375
	376	CASE ( 23 )
	377
	378	IF ( data_output_2d_on_each_pe ) THEN
[105]	379	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	380	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	381	ELSE
[102]	382	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	383	POSITION='APPEND' )
	384	ENDIF
	385
	386	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	387	!
	388	!-- Output for combine_plot_fields
	389	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	390	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	391	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	392	ENDIF
	393	!
	394	!-- Determine and write ISO2D coordiante header
	395	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	396	hu = 0.0
	397	ho = zu(nz+1)
	398	DO i = 1, nz
	399	eta(i) = REAL( zu(i) ) / zu(nz+1)
	400	ENDDO
	401	eta(0) = 0.0
	402	eta(nz+1) = 1.0
	403
	404	WRITE (23) dx,eta,hu,ho
	405	DEALLOCATE( eta, ho, hu )
	406	!
	407	!-- Create output file for local parameters
[102]	408	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	409	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	410	openfile(29)%opened = .TRUE.
	411
	412	ENDIF
	413
	414	CASE ( 30 )
	415
[105]	416	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	417	FORM='UNFORMATTED' )
[1]	418	!
	419	!-- Write coordinate file for AVS
	420	IF ( myid == 0 ) THEN
	421	#if defined( __parallel )
	422	!
	423	!-- Specifications for combine_plot_fields
	424	IF ( .NOT. do3d_compress ) THEN
[667]	425	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
[1]	426	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	427	ENDIF
	428	#endif
	429	!
	430	!-- Write coordinate file for AVS:
	431	!-- First determine file names (including cyle numbers) of AVS files on
	432	!-- target machine (to which the files are to be transferred).
	433	!-- Therefore path information has to be obtained first.
	434	IF ( avs_output ) THEN
[82]	435	iaddres = LEN_TRIM( return_addres )
	436	iusern = LEN_TRIM( return_username )
[1]	437
	438	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	439	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	440	.NOT. avs_data_file_found )
	441
	442	READ ( 3, '(A)', END=1 ) zeile
	443
	444	SELECT CASE ( zeile(1:11) )
	445
	446	CASE ( 'PLOT3D_COOR' )
	447	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	448	avs_coor_file_localname
	449	avs_coor_file_found = .TRUE.
	450
	451	CASE ( 'PLOT3D_DATA' )
	452	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	453	avs_data_file_localname
	454	avs_data_file_found = .TRUE.
	455
	456	CASE DEFAULT
	457	READ ( 3, '(A/A)' ) zeile, zeile
	458
	459	END SELECT
	460
	461	ENDDO
	462	!
	463	!-- Now the cycle numbers on the remote machine must be obtained
	464	!-- using batch_scp
	465	1 CLOSE ( 3 )
	466	IF ( .NOT. avs_coor_file_found .OR. &
	467	.NOT. avs_data_file_found ) THEN
[274]	468	message_string= 'no filename for AVS-data-file ' // &
	469	'found in MRUN-config-file' // &
[247]	470	' &filename in FLD-file set to "unknown"'
	471	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	472
	473	avs_coor_file = 'unknown'
	474	avs_data_file = 'unknown'
	475	ELSE
	476	get_filenames = .TRUE.
	477	IF ( TRIM( host ) == 'hpmuk' .OR. &
	478	TRIM( host ) == 'lcmuk' ) THEN
	479	batch_scp = '/home/raasch/pub/batch_scp'
	480	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	481	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	482	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	483	TRIM( host ) == 'ibmb' ) THEN
	484	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	485	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	486	batch_scp = '/home/nhbksira/pub/batch_scp'
	487	ELSE
[247]	488	message_string= 'no path for batch_scp on host "' // &
	489	TRIM( host ) // '"'
	490	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	491	get_filenames = .FALSE.
	492	ENDIF
	493
	494	IF ( get_filenames ) THEN
	495	!
	496	!-- Determine the coordinate file name.
	497	!-- /etc/passwd serves as Dummy-Datei, because it is not
	498	!-- really transferred.
	499	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	500	return_username(1:iusern) // ' ' // &
[1]	501	return_addres(1:iaddres) // ' /etc/passwd "' // &
	502	TRIM( avs_coor_file_catalog ) // '" ' // &
	503	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	504
	505	CALL local_system( command )
	506	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	507	READ ( 3, '(A)' ) avs_coor_file
	508	CLOSE ( 3 )
	509	!
	510	!-- Determine the data file name
	511	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	512	return_username(1:iusern) // ' ' // &
[1]	513	return_addres(1:iaddres) // ' /etc/passwd "' // &
	514	TRIM( avs_data_file_catalog ) // '" ' // &
	515	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	516
	517	CALL local_system( command )
	518	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	519	READ ( 3, '(A)' ) avs_data_file
	520	CLOSE ( 3 )
	521
	522	ELSE
	523
	524	avs_coor_file = 'unknown'
	525	avs_data_file = 'unknown'
	526
	527	ENDIF
	528
	529	ENDIF
	530
	531	!
	532	!-- Output of the coordinate file description for FLD-file
	533	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	534	openfile(33)%opened = .TRUE.
	535	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
[667]	536	TRIM( avs_coor_file ), (nx+2nbgp)4, &
	537	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
[1]	538
	539
	540	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	541	DO i = 0, nx+1
	542	xkoor(i) = i * dx
	543	ENDDO
	544	DO j = 0, ny+1
	545	ykoor(j) = j * dy
	546	ENDDO
	547	DO k = 0, nz_do3d
	548	zkoor(k) = zu(k)
	549	ENDDO
	550
	551	!
	552	!-- Create and write on AVS coordinate file
	553	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	554	openfile(31)%opened = .TRUE.
	555
	556	WRITE (31) xkoor, ykoor, zkoor
	557	DEALLOCATE( xkoor, ykoor, zkoor )
	558
	559	!
	560	!-- Create FLD file (being written on in close_file)
	561	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	562	openfile(32)%opened = .TRUE.
	563
	564	!
	565	!-- Create flag file for compressed 3D output,
	566	!-- influences output commands in mrun
	567	IF ( do3d_compress ) THEN
	568	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	569	WRITE ( 3, '(1X)' )
	570	CLOSE ( 3 )
	571	ENDIF
	572
	573	ENDIF
	574
	575	ENDIF
	576
	577	!
	578	!-- In case of data compression output of the coordinates of the
	579	!-- corresponding partial array of a PE only once at the top of the file
	580	IF ( avs_output .AND. do3d_compress ) THEN
[667]	581	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
[1]	582	ENDIF
	583
	584	CASE ( 40:49 )
	585
	586	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
	587	suffix = ''
	588	ELSE
	589	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
	590	ENDIF
[105]	591	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
	592	TRIM( suffix ), &
[102]	593	FORM='FORMATTED' )
[1]	594	!
	595	!-- Write contents comments at the top of the file
	596	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
	597	TRIM( region( file_id - 40 ) )
	598
	599	CASE ( 50:59 )
	600
	601	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	602	suffix = ''
	603	ELSE
	604	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	605	ENDIF
[105]	606	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	607	TRIM( suffix ), &
[102]	608	FORM='FORMATTED', RECL=496 )
[1]	609	!
	610	!-- Write PROFIL parameter file for output of time series
	611	!-- NOTE: To be on the safe side, this output is done at the beginning of
	612	!-- the model run (in case of collapse) and it is repeated in
	613	!-- close_file, then, however, with value ranges for the coordinate
	614	!-- systems
	615	!
	616	!-- Firstly determine the number of the coordinate systems to be drawn
	617	cranz = 0
	618	DO j = 1, 10
	619	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	620	ENDDO
	621	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	622	TRIM( region( file_id - 50 ) )
	623	!
	624	!-- Write RAHMEN parameter
[105]	625	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	626	TRIM( suffix ), &
[102]	627	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	628	WRITE ( 90, RAHMEN )
	629	!
	630	!-- Determine and write CROSS parameters for the individual coordinate
	631	!-- systems
	632	DO j = 1, 10
	633	k = cross_ts_number_count(j)
	634	IF ( k /= 0 ) THEN
	635	!
	636	!-- Store curve numbers, colours and line style
	637	klist(1:k) = cross_ts_numbers(1:k,j)
	638	klist(k+1:10) = 999999
	639	cucol(1:k) = linecolors(1:k)
	640	lstyle(1:k) = linestyles(1:k)
	641	!
	642	!-- Write CROSS parameter
	643	WRITE ( 90, CROSS )
	644
	645	ENDIF
	646	ENDDO
	647
	648	CLOSE ( 90 )
	649	!
	650	!-- Write all labels at the top of the data file, but only during the
	651	!-- first run of a sequence of jobs. The following jobs copy the time
	652	!-- series data to the bottom of that file.
	653	IF ( runnr == 0 ) THEN
	654	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	655	' ' // TRIM( region( file_id - 50 ) )
	656	ENDIF
	657
	658
	659	CASE ( 80 )
	660
	661	IF ( myid_char == '' ) THEN
[105]	662	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	663	FORM='FORMATTED', POSITION='APPEND' )
[1]	664	ELSE
	665	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	666	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	667	ENDIF
[809]	668	#if defined( __parallel ) && ! defined ( __check )
[1]	669	!
	670	!-- Set a barrier in order to allow that thereafter all other
	671	!-- processors in the directory created by PE0 can open their file.
	672	!-- WARNING: The following barrier will lead to hanging jobs, if
	673	!-- check_open is first called from routine
	674	!-- allocate_prt_memory!
	675	IF ( .NOT. openfile(80)%opened_before ) THEN
	676	CALL MPI_BARRIER( comm2d, ierr )
	677	ENDIF
	678	#endif
[105]	679	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	680	myid_char, &
[102]	681	FORM='FORMATTED', POSITION='APPEND' )
[1]	682	ENDIF
	683
	684	IF ( .NOT. openfile(80)%opened_before ) THEN
	685	WRITE ( 80, 8000 ) TRIM( run_description_header )
	686	ENDIF
	687
	688	CASE ( 81 )
	689
[102]	690	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	691	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	692
	693	CASE ( 82 )
	694
[102]	695	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	696	POSITION = 'APPEND' )
	697
	698	CASE ( 83 )
	699
[102]	700	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	701	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	702
	703	CASE ( 84 )
	704
[102]	705	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	706	POSITION='APPEND' )
	707
	708	CASE ( 85 )
	709
	710	IF ( myid_char == '' ) THEN
[105]	711	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	712	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	713	ELSE
	714	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	715	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	716	ENDIF
[809]	717	#if defined( __parallel ) && ! defined ( __check )
[1]	718	!
	719	!-- Set a barrier in order to allow that thereafter all other
	720	!-- processors in the directory created by PE0 can open their file
	721	CALL MPI_BARRIER( comm2d, ierr )
	722	#endif
[105]	723	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	724	myid_char, &
[102]	725	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	726	ENDIF
	727
	728	IF ( .NOT. openfile(85)%opened_before ) THEN
	729	WRITE ( 85 ) run_description_header
	730	!
	731	!-- Attention: change version number whenever the output format on
[849]	732	!-- unit 85 is changed (see also in routine
	733	!-- lpm_data_output_particles)
[1]	734	rtext = 'data format version 3.0'
	735	WRITE ( 85 ) rtext
	736	WRITE ( 85 ) number_of_particle_groups, &
	737	max_number_of_particle_groups
	738	WRITE ( 85 ) particle_groups
	739	ENDIF
	740
	741	#if defined( __netcdf )
	742	CASE ( 101, 111 )
	743	!
	744	!-- Set filename depending on unit number
	745	IF ( file_id == 101 ) THEN
[102]	746	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	747	av = 0
	748	ELSE
[102]	749	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	750	av = 1
	751	ENDIF
	752	!
	753	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	754	!-- be opened for extension, if its dimensions and variables match the
	755	!-- actual run.
	756	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	757
	758	IF ( netcdf_extend ) THEN
	759	!
[493]	760	!-- Open an existing NetCDF file for output
[600]	761	IF ( netcdf_data_format < 3 ) THEN
	762	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
	763	ELSE
[493]	764	#if defined( __netcdf4 )
[600]	765	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
	766	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	767	#endif
[600]	768	ENDIF
[263]	769
	770	CALL handle_netcdf_error( 'check_open', 20 )
[1]	771	!
	772	!-- Read header information and set all ids. If there is a mismatch
	773	!-- between the previuos and the actual run, netcdf_extend is returned
	774	!-- as .FALSE.
	775	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	776
	777	!
	778	!-- Remove the local file, if it can not be extended
	779	IF ( .NOT. netcdf_extend ) THEN
	780	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	781	CALL handle_netcdf_error( 'check_open', 21 )
[493]	782	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	783	ENDIF
	784
	785	ENDIF
	786
	787	IF ( .NOT. netcdf_extend ) THEN
	788	!
[493]	789	!-- Create a new NetCDF output file with requested NetCDF format
	790	IF ( netcdf_data_format == 1 ) THEN
	791	!
	792	!-- Classic NetCDF format
	793	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	794
	795	ELSEIF ( netcdf_data_format == 2 ) THEN
	796	!
	797	!-- 64bit-offset format
[1]	798	nc_stat = NF90_CREATE( filename, &
	799	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	800	id_set_xy(av) )
[247]	801
[493]	802	#if defined( __netcdf4 )
	803	ELSEIF ( netcdf_data_format == 3 ) THEN
	804	!
	805	!-- NetCDF4/HDF5 format
	806	nc_stat = NF90_CREATE( filename, &
	807	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	808	id_set_xy(av), COMM = comm2d, &
	809	INFO = MPI_INFO_NULL )
	810
	811	ELSEIF ( netcdf_data_format == 4 ) THEN
	812	!
	813	!-- NetCDF4/HDF5 format with classic model flag
	814	nc_stat = NF90_CREATE( filename, &
	815	OR( NF90_NOCLOBBER, &
	816	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	817	id_set_xy(av), COMM = comm2d, &
	818	INFO = MPI_INFO_NULL )
[1]	819	#endif
	820	ENDIF
[493]	821
[263]	822	CALL handle_netcdf_error( 'check_open', 22 )
[493]	823
[1]	824	!
	825	!-- Define the header
	826	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	827
[493]	828	!
	829	!-- In case of parallel NetCDF output, create flag file which tells
	830	!-- combine_plot_fields that nothing is to do.
	831	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	832	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	833	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	834	CLOSE( 99 )
	835	ENDIF
	836
[1]	837	ENDIF
	838
	839	CASE ( 102, 112 )
	840	!
	841	!-- Set filename depending on unit number
	842	IF ( file_id == 102 ) THEN
[102]	843	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	844	av = 0
	845	ELSE
[102]	846	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	847	av = 1
	848	ENDIF
	849	!
	850	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	851	!-- be opened for extension, if its dimensions and variables match the
	852	!-- actual run.
	853	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	854
	855	IF ( netcdf_extend ) THEN
	856	!
[600]	857	!-- Open an existing NetCDF file for output
	858	IF ( netcdf_data_format < 3 ) THEN
	859	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
	860	ELSE
[493]	861	#if defined( __netcdf4 )
[600]	862	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
	863	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	864	#endif
[600]	865	ENDIF
	866
[263]	867	CALL handle_netcdf_error( 'check_open', 23 )
[1]	868	!
	869	!-- Read header information and set all ids. If there is a mismatch
	870	!-- between the previuos and the actual run, netcdf_extend is returned
	871	!-- as .FALSE.
	872	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	873
	874	!
	875	!-- Remove the local file, if it can not be extended
	876	IF ( .NOT. netcdf_extend ) THEN
	877	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	878	CALL handle_netcdf_error( 'check_open', 24 )
[493]	879	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	880	ENDIF
	881
	882	ENDIF
	883
	884	IF ( .NOT. netcdf_extend ) THEN
	885	!
[493]	886	!-- Create a new NetCDF output file with requested NetCDF format
	887	IF ( netcdf_data_format == 1 ) THEN
	888	!
	889	!-- Classic NetCDF format
	890	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	891
	892	ELSEIF ( netcdf_data_format == 2 ) THEN
	893	!
	894	!-- 64bit-offset format
[1]	895	nc_stat = NF90_CREATE( filename, &
	896	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	897	id_set_xz(av) )
[493]	898
	899	#if defined( __netcdf4 )
	900	ELSEIF ( netcdf_data_format == 3 ) THEN
	901	!
	902	!-- NetCDF4/HDF5 format
	903	nc_stat = NF90_CREATE( filename, &
	904	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	905	id_set_xz(av), COMM = comm2d, &
	906	INFO = MPI_INFO_NULL )
	907
	908	ELSEIF ( netcdf_data_format == 4 ) THEN
	909	!
	910	!-- NetCDF4/HDF5 format with classic model flag
	911	nc_stat = NF90_CREATE( filename, &
	912	OR( NF90_NOCLOBBER, &
	913	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	914	id_set_xz(av), COMM = comm2d, &
	915	INFO = MPI_INFO_NULL )
[1]	916	#endif
	917	ENDIF
[493]	918
[263]	919	CALL handle_netcdf_error( 'check_open', 25 )
[493]	920
[1]	921	!
	922	!-- Define the header
	923	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	924
[493]	925	!
	926	!-- In case of parallel NetCDF output, create flag file which tells
	927	!-- combine_plot_fields that nothing is to do.
	928	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	929	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	930	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	931	CLOSE( 99 )
	932	ENDIF
	933
[1]	934	ENDIF
	935
	936	CASE ( 103, 113 )
	937	!
	938	!-- Set filename depending on unit number
	939	IF ( file_id == 103 ) THEN
[102]	940	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	941	av = 0
	942	ELSE
[102]	943	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	944	av = 1
	945	ENDIF
	946	!
	947	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	948	!-- be opened for extension, if its dimensions and variables match the
	949	!-- actual run.
	950	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	951
	952	IF ( netcdf_extend ) THEN
	953	!
[600]	954	!-- Open an existing NetCDF file for output
	955	IF ( netcdf_data_format < 3 ) THEN
	956	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
	957	ELSE
[493]	958	#if defined( __netcdf4 )
[600]	959	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
	960	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	961	#endif
[600]	962	ENDIF
[667]	963
[263]	964	CALL handle_netcdf_error( 'check_open', 26 )
[1]	965	!
	966	!-- Read header information and set all ids. If there is a mismatch
	967	!-- between the previuos and the actual run, netcdf_extend is returned
	968	!-- as .FALSE.
	969	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	970
	971	!
	972	!-- Remove the local file, if it can not be extended
	973	IF ( .NOT. netcdf_extend ) THEN
	974	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	975	CALL handle_netcdf_error( 'check_open', 27 )
[493]	976	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	977	ENDIF
	978
	979	ENDIF
	980
	981	IF ( .NOT. netcdf_extend ) THEN
	982	!
[493]	983	!-- Create a new NetCDF output file with requested NetCDF format
	984	IF ( netcdf_data_format == 1 ) THEN
	985	!
	986	!-- Classic NetCDF format
	987	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	988
	989	ELSEIF ( netcdf_data_format == 2 ) THEN
	990	!
	991	!-- 64bit-offset format
[1]	992	nc_stat = NF90_CREATE( filename, &
[493]	993	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
[1]	994	id_set_yz(av) )
[493]	995
	996	#if defined( __netcdf4 )
	997	ELSEIF ( netcdf_data_format == 3 ) THEN
	998	!
	999	!-- NetCDF4/HDF5 format
	1000	nc_stat = NF90_CREATE( filename, &
	1001	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1002	id_set_yz(av), COMM = comm2d, &
	1003	INFO = MPI_INFO_NULL )
	1004
	1005	ELSEIF ( netcdf_data_format == 4 ) THEN
	1006	!
	1007	!-- NetCDF4/HDF5 format with classic model flag
	1008	nc_stat = NF90_CREATE( filename, &
	1009	OR( NF90_NOCLOBBER, &
	1010	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1011	id_set_yz(av), COMM = comm2d, &
	1012	INFO = MPI_INFO_NULL )
[1]	1013	#endif
	1014	ENDIF
[493]	1015
[263]	1016	CALL handle_netcdf_error( 'check_open', 28 )
[493]	1017
[1]	1018	!
	1019	!-- Define the header
	1020	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	1021
[493]	1022	!
	1023	!-- In case of parallel NetCDF output, create flag file which tells
	1024	!-- combine_plot_fields that nothing is to do.
	1025	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	1026	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	1027	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1028	CLOSE( 99 )
	1029	ENDIF
	1030
[1]	1031	ENDIF
	1032
	1033	CASE ( 104 )
	1034	!
[102]	1035	!-- Set filename
	1036	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	1037
	1038	!
[1]	1039	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1040	!-- be opened for extension, if its variables match the actual run.
[102]	1041	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1042
	1043	IF ( netcdf_extend ) THEN
	1044	!
	1045	!-- Open an existing NetCDF file for output
[102]	1046	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
[263]	1047	CALL handle_netcdf_error( 'check_open', 29 )
[1]	1048	!
	1049	!-- Read header information and set all ids. If there is a mismatch
	1050	!-- between the previuos and the actual run, netcdf_extend is returned
	1051	!-- as .FALSE.
	1052	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1053
	1054	!
	1055	!-- Remove the local file, if it can not be extended
	1056	IF ( .NOT. netcdf_extend ) THEN
	1057	nc_stat = NF90_CLOSE( id_set_pr )
[263]	1058	CALL handle_netcdf_error( 'check_open', 30 )
[102]	1059	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1060	ENDIF
	1061
	1062	ENDIF
	1063
	1064	IF ( .NOT. netcdf_extend ) THEN
	1065	!
	1066	!-- Create a new NetCDF output file
[493]	1067	IF ( netcdf_data_format > 1 ) THEN
[102]	1068	nc_stat = NF90_CREATE( filename, &
[1]	1069	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1070	id_set_pr )
	1071	ELSE
[102]	1072	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	1073	ENDIF
[263]	1074	CALL handle_netcdf_error( 'check_open', 31 )
[1]	1075	!
	1076	!-- Define the header
	1077	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1078
	1079	ENDIF
	1080
	1081	CASE ( 105 )
	1082	!
[102]	1083	!-- Set filename
	1084	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	1085
	1086	!
[1]	1087	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1088	!-- be opened for extension, if its variables match the actual run.
[102]	1089	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1090
	1091	IF ( netcdf_extend ) THEN
	1092	!
	1093	!-- Open an existing NetCDF file for output
[102]	1094	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
[263]	1095	CALL handle_netcdf_error( 'check_open', 32 )
[1]	1096	!
	1097	!-- Read header information and set all ids. If there is a mismatch
	1098	!-- between the previuos and the actual run, netcdf_extend is returned
	1099	!-- as .FALSE.
	1100	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1101
	1102	!
	1103	!-- Remove the local file, if it can not be extended
	1104	IF ( .NOT. netcdf_extend ) THEN
	1105	nc_stat = NF90_CLOSE( id_set_ts )
[263]	1106	CALL handle_netcdf_error( 'check_open', 33 )
[102]	1107	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1108	ENDIF
	1109
	1110	ENDIF
	1111
	1112	IF ( .NOT. netcdf_extend ) THEN
	1113	!
	1114	!-- Create a new NetCDF output file
[493]	1115	IF ( netcdf_data_format > 1 ) THEN
[102]	1116	nc_stat = NF90_CREATE( filename, &
[1]	1117	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1118	id_set_ts )
	1119	ELSE
[102]	1120	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	1121	ENDIF
[263]	1122	CALL handle_netcdf_error( 'check_open', 34 )
[1]	1123	!
	1124	!-- Define the header
	1125	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1126
	1127	ENDIF
	1128
	1129
	1130	CASE ( 106, 116 )
	1131	!
	1132	!-- Set filename depending on unit number
	1133	IF ( file_id == 106 ) THEN
[102]	1134	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	1135	av = 0
	1136	ELSE
[102]	1137	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	1138	av = 1
	1139	ENDIF
	1140	!
[493]	1141	!-- Inquire, if there is a NetCDF file from a previous run. This should
[1]	1142	!-- be opened for extension, if its dimensions and variables match the
	1143	!-- actual run.
	1144	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1145
	1146	IF ( netcdf_extend ) THEN
	1147	!
[493]	1148	!-- Open an existing NetCDF file for output
[765]	1149	IF ( netcdf_data_format < 3 ) THEN
	1150	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
	1151	ELSE
[493]	1152	#if defined( __netcdf4 )
[765]	1153	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
	1154	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	1155	#endif
[765]	1156	ENDIF
[263]	1157	CALL handle_netcdf_error( 'check_open', 35 )
[1]	1158	!
	1159	!-- Read header information and set all ids. If there is a mismatch
	1160	!-- between the previuos and the actual run, netcdf_extend is returned
	1161	!-- as .FALSE.
	1162	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1163
	1164	!
	1165	!-- Remove the local file, if it can not be extended
	1166	IF ( .NOT. netcdf_extend ) THEN
	1167	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1168	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1169	CALL local_system('rm ' // TRIM( filename ) )
	1170	ENDIF
	1171
	1172	ENDIF
	1173
	1174	IF ( .NOT. netcdf_extend ) THEN
	1175	!
[493]	1176	!-- Create a new NetCDF output file with requested NetCDF format
	1177	IF ( netcdf_data_format == 1 ) THEN
	1178	!
	1179	!-- Classic NetCDF format
	1180	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1181
	1182	ELSEIF ( netcdf_data_format == 2 ) THEN
	1183	!
	1184	!-- 64bit-offset format
[1]	1185	nc_stat = NF90_CREATE( filename, &
	1186	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1187	id_set_3d(av) )
[493]	1188
	1189	#if defined( __netcdf4 )
	1190	ELSEIF ( netcdf_data_format == 3 ) THEN
	1191	!
	1192	!-- NetCDF4/HDF5 format
	1193	nc_stat = NF90_CREATE( filename, &
	1194	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1195	id_set_3d(av), COMM = comm2d, &
	1196	INFO = MPI_INFO_NULL )
	1197
	1198	ELSEIF ( netcdf_data_format == 4 ) THEN
	1199	!
	1200	!-- NetCDF4/HDF5 format with classic model flag
	1201	nc_stat = NF90_CREATE( filename, &
	1202	OR( NF90_NOCLOBBER, &
	1203	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1204	id_set_3d(av), COMM = comm2d, &
	1205	INFO = MPI_INFO_NULL )
[1]	1206	#endif
	1207	ENDIF
[493]	1208
[263]	1209	CALL handle_netcdf_error( 'check_open', 37 )
[493]	1210
[1]	1211	!
	1212	!-- Define the header
	1213	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1214
[493]	1215	!
	1216	!-- In case of parallel NetCDF output, create flag file which tells
	1217	!-- combine_plot_fields that nothing is to do.
	1218	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	1219	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1220	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1221	CLOSE( 99 )
	1222	ENDIF
	1223
[1]	1224	ENDIF
	1225
	1226
	1227	CASE ( 107 )
	1228	!
[102]	1229	!-- Set filename
	1230	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1231
	1232	!
[1]	1233	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1234	!-- be opened for extension, if its variables match the actual run.
[102]	1235	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1236
	1237	IF ( netcdf_extend ) THEN
	1238	!
	1239	!-- Open an existing NetCDF file for output
[102]	1240	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
[263]	1241	CALL handle_netcdf_error( 'check_open', 38 )
	1242
[1]	1243	!
	1244	!-- Read header information and set all ids. If there is a mismatch
	1245	!-- between the previuos and the actual run, netcdf_extend is returned
	1246	!-- as .FALSE.
	1247	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1248
	1249	!
	1250	!-- Remove the local file, if it can not be extended
	1251	IF ( .NOT. netcdf_extend ) THEN
	1252	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1253	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1254	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1255	ENDIF
	1256
	1257	ENDIF
	1258
	1259	IF ( .NOT. netcdf_extend ) THEN
	1260	!
	1261	!-- Create a new NetCDF output file
[493]	1262	IF ( netcdf_data_format > 1 ) THEN
[102]	1263	nc_stat = NF90_CREATE( filename, &
[1]	1264	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1265	id_set_sp )
	1266	ELSE
[102]	1267	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1268	ENDIF
[263]	1269	CALL handle_netcdf_error( 'check_open', 40 )
[1]	1270	!
	1271	!-- Define the header
	1272	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1273
	1274	ENDIF
	1275
	1276
	1277	CASE ( 108 )
	1278
	1279	IF ( myid_char == '' ) THEN
[102]	1280	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1281	ELSE
[105]	1282	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1283	myid_char
[1]	1284	ENDIF
	1285	!
	1286	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1287	!-- be opened for extension, if its variables match the actual run.
	1288	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1289
	1290	IF ( netcdf_extend ) THEN
	1291	!
	1292	!-- Open an existing NetCDF file for output
	1293	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
[263]	1294	CALL handle_netcdf_error( 'check_open', 41 )
[1]	1295	!
	1296	!-- Read header information and set all ids. If there is a mismatch
	1297	!-- between the previuos and the actual run, netcdf_extend is returned
	1298	!-- as .FALSE.
	1299	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1300
	1301	!
	1302	!-- Remove the local file, if it can not be extended
	1303	IF ( .NOT. netcdf_extend ) THEN
	1304	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1305	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1306	CALL local_system( 'rm ' // filename )
	1307	ENDIF
	1308
	1309	ENDIF
	1310
	1311	IF ( .NOT. netcdf_extend ) THEN
	1312
	1313	!
	1314	!-- For runs on multiple processors create the subdirectory
	1315	IF ( myid_char /= '' ) THEN
	1316	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1317	THEN ! needs modification in case of non-extendable sets
[102]	1318	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1319	TRIM( coupling_char ) // '/' )
[1]	1320	ENDIF
[809]	1321	#if defined( __parallel ) && ! defined ( __check )
[807]	1322	!
[1]	1323	!-- Set a barrier in order to allow that all other processors in the
	1324	!-- directory created by PE0 can open their file
	1325	CALL MPI_BARRIER( comm2d, ierr )
	1326	#endif
	1327	ENDIF
	1328
	1329	!
[519]	1330	!-- Create a new NetCDF output file with requested NetCDF format
	1331	IF ( netcdf_data_format == 1 ) THEN
	1332	!
	1333	!-- Classic NetCDF format
	1334	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1335
	1336	ELSEIF ( netcdf_data_format == 2 ) THEN
	1337	!
	1338	!-- 64bit-offset format
[1]	1339	nc_stat = NF90_CREATE( filename, &
	1340	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1341	id_set_prt )
[519]	1342
	1343	#if defined( __netcdf4 )
	1344	ELSEIF ( netcdf_data_format == 3 ) THEN
	1345	!
	1346	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
	1347	nc_stat = NF90_CREATE( filename, &
	1348	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1349	id_set_prt )
	1350
	1351	ELSEIF ( netcdf_data_format == 4 ) THEN
	1352	!
	1353	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
	1354	!-- output into a single file!
	1355	nc_stat = NF90_CREATE( filename, &
	1356	OR( NF90_NOCLOBBER, &
	1357	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1358	id_set_prt )
	1359	#endif
[1]	1360	ENDIF
[667]	1361
[263]	1362	CALL handle_netcdf_error( 'check_open', 43 )
[1]	1363
	1364	!
	1365	!-- Define the header
	1366	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1367
	1368	ENDIF
	1369
	1370	CASE ( 109 )
	1371	!
[102]	1372	!-- Set filename
	1373	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1374
	1375	!
[1]	1376	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1377	!-- be opened for extension, if its variables match the actual run.
[102]	1378	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1379
	1380	IF ( netcdf_extend ) THEN
	1381	!
	1382	!-- Open an existing NetCDF file for output
[102]	1383	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
[263]	1384	CALL handle_netcdf_error( 'check_open', 393 )
[1]	1385	!
	1386	!-- Read header information and set all ids. If there is a mismatch
	1387	!-- between the previuos and the actual run, netcdf_extend is returned
	1388	!-- as .FALSE.
	1389	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1390
	1391	!
	1392	!-- Remove the local file, if it can not be extended
	1393	IF ( .NOT. netcdf_extend ) THEN
	1394	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1395	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1396	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1397	ENDIF
	1398
	1399	ENDIF
	1400
	1401	IF ( .NOT. netcdf_extend ) THEN
	1402	!
	1403	!-- Create a new NetCDF output file
[493]	1404	IF ( netcdf_data_format > 1 ) THEN
[102]	1405	nc_stat = NF90_CREATE( filename, &
[1]	1406	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1407	id_set_pts )
	1408	ELSE
[102]	1409	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1410	ENDIF
[263]	1411	CALL handle_netcdf_error( 'check_open', 395 )
[1]	1412	!
	1413	!-- Define the header
	1414	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1415
	1416	ENDIF
[410]	1417
[564]	1418	CASE ( 201:200+2*max_masks )
[410]	1419	!
	1420	!-- Set filename depending on unit number
[564]	1421	IF ( file_id <= 200+max_masks ) THEN
	1422	mid = file_id - 200
[410]	1423	WRITE ( mask_char,'(I2.2)') mid
	1424	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
	1425	av = 0
	1426	ELSE
[564]	1427	mid = file_id - (200+max_masks)
[410]	1428	WRITE ( mask_char,'(I2.2)') mid
	1429	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
	1430	coupling_char
	1431	av = 1
	1432	ENDIF
	1433	!
	1434	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1435	!-- be opened for extension, if its dimensions and variables match the
	1436	!-- actual run.
	1437	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1438
	1439	IF ( netcdf_extend ) THEN
	1440	!
	1441	!-- Open an existing NetCDF file for output
	1442	#if defined( __netcdf4 )
[493]	1443	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
	1444	COMM = comm2d, INFO = MPI_INFO_NULL )
[1]	1445	#else
[410]	1446	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
	1447	#endif
[564]	1448	CALL handle_netcdf_error( 'check_open', 456 )
[410]	1449	!
	1450	!-- Read header information and set all ids. If there is a mismatch
	1451	!-- between the previuos and the actual run, netcdf_extend is returned
	1452	!-- as .FALSE.
	1453	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
[1]	1454
[410]	1455	!
	1456	!-- Remove the local file, if it can not be extended
	1457	IF ( .NOT. netcdf_extend ) THEN
	1458	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[564]	1459	CALL handle_netcdf_error( 'check_open', 457 )
[410]	1460	CALL local_system('rm ' // TRIM( filename ) )
	1461	ENDIF
[1]	1462
[410]	1463	ENDIF
	1464
	1465	IF ( .NOT. netcdf_extend ) THEN
[1]	1466	!
[493]	1467	!-- Create a new NetCDF output file with requested NetCDF format
	1468	IF ( netcdf_data_format == 1 ) THEN
	1469	!
	1470	!-- Classic NetCDF format
	1471	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
	1472	id_set_mask(mid,av) )
[410]	1473
[493]	1474	ELSEIF ( netcdf_data_format == 2 ) THEN
	1475	!
	1476	!-- 64bit-offset format
	1477	nc_stat = NF90_CREATE( filename, &
	1478	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1479	id_set_mask(mid,av) )
[410]	1480
	1481
	1482	#if defined( __netcdf4 )
[493]	1483	ELSEIF ( netcdf_data_format == 3 ) THEN
	1484	!
	1485	!-- NetCDF4/HDF5 format
	1486	nc_stat = NF90_CREATE( filename, &
	1487	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1488	id_set_mask(mid,av), COMM = comm2d, &
	1489	INFO = MPI_INFO_NULL )
[410]	1490
[493]	1491	ELSEIF ( netcdf_data_format == 4 ) THEN
	1492	!
	1493	!-- NetCDF4/HDF5 format with classic model flag
	1494	nc_stat = NF90_CREATE( filename, &
	1495	OR( NF90_NOCLOBBER, &
	1496	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1497	id_set_mask(mid,av), COMM = comm2d, &
	1498	INFO = MPI_INFO_NULL )
[410]	1499	#endif
[493]	1500	ENDIF
[410]	1501
[564]	1502	CALL handle_netcdf_error( 'check_open', 458 )
[410]	1503	!
	1504	!-- Define the header
	1505	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
	1506
	1507	ENDIF
	1508
	1509
	1510	#else
	1511
[564]	1512	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1513
	1514	!
[1]	1515	!-- Nothing is done in case of missing netcdf support
	1516	RETURN
	1517
	1518	#endif
	1519
	1520	CASE DEFAULT
	1521
[247]	1522	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1523	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1524
	1525	END SELECT
	1526
	1527	!
	1528	!-- Set open flag
	1529	openfile(file_id)%opened = .TRUE.
	1530
	1531	!
	1532	!-- Formats
	1533	3300 FORMAT ('#'/ &
	1534	'coord 1 file=',A,' filetype=unformatted'/ &
	1535	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1536	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1537	'#')
	1538	4000 FORMAT ('# ',A)
	1539	5000 FORMAT ('# ',A/ &
	1540	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1541	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1542	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1543	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1544	8000 FORMAT (A/ &
	1545	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1546	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1547	103('-'))
	1548
	1549	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |