Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 817

Last change on this file since 817 was 810, checked in by maronga, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 56.8 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
	3	!------------------------------------------------------------------------------!
[247]	4	! Current revisions:
[1]	5	! -----------------
	6	!
[810]	7	!
[1]	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: check_open.f90 810 2012-01-30 13:40:12Z raasch $
[810]	11	!
	12	! 809 2012-01-30 13:32:58Z maronga
	13	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	14	!
[808]	15	! 807 2012-01-25 11:53:51Z maronga
	16	! New cpp directive "__check" implemented which is used by check_namelist_files
	17	!
[766]	18	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
[77]	19	!
[668]	20	! 667 2010-12-23 12:06:00Z suehring/gryschka
	21	! Output of total array size was adapted to nbgp.
	22	!
[601]	23	! 600 2010-11-24 16:10:51Z raasch
	24	! bugfix in opening of cross section netcdf-files (parallel opening with
	25	! netcdf4 only works for netcdf_data_format > 2)
	26	!
[565]	27	! 564 2010-09-30 13:18:59Z helmke
	28	! start number of mask output files changed to 201, netcdf message identifiers
	29	! of masked output changed
	30	!
[520]	31	! 519 2010-03-19 05:30:02Z raasch
	32	! NetCDF4 support for particle data
	33	!
[494]	34	! 493 2010-03-01 08:30:24Z raasch
	35	! NetCDF4 support (parallel output)
	36	!
[449]	37	! 410 2009-12-04 17:05:40Z letzel
	38	! masked data output
	39	!
[392]	40	! 277 2009-03-31 09:13:47Z heinze
	41	! Output of NetCDF messages with aid of message handling routine.
	42	! Output of messages replaced by message handling routine
	43	!
[198]	44	! 146 2008-01-17 13:08:34Z raasch
	45	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	46	! because only this file contains the global variables,
	47	! myid_char_14 removed
	48	!
[139]	49	! 120 2007-10-17 11:54:43Z raasch
	50	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
	51	!
[110]	52	! 105 2007-08-08 07:12:55Z raasch
	53	! Different filenames are used in case of a coupled simulation,
	54	! coupling_char added to all relevant filenames
	55	!
[83]	56	! 82 2007-04-16 15:40:52Z raasch
	57	! Call of local_getenv removed, preprocessor directives for old systems removed
	58	!
[77]	59	! 46 2007-03-05 06:00:47Z raasch
	60	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	61	!
[3]	62	! RCS Log replace by Id keyword, revision history cleaned up
	63	!
[1]	64	! Revision 1.44 2006/08/22 13:48:34 raasch
	65	! xz and yz cross sections now up to nzt+1
	66	!
	67	! Revision 1.1 1997/08/11 06:10:55 raasch
	68	! Initial revision
	69	!
	70	!
	71	! Description:
	72	! ------------
	73	! Check if file unit is open. If not, open file and, if necessary, write a
	74	! header or start other initializing actions, respectively.
	75	!------------------------------------------------------------------------------!
	76
	77	USE array_kind
	78	USE arrays_3d
	79	USE control_parameters
	80	USE grid_variables
	81	USE indices
	82	USE netcdf_control
	83	USE particle_attributes
	84	USE pegrid
	85	USE profil_parameter
	86	USE statistics
	87
	88	IMPLICIT NONE
	89
[410]	90	CHARACTER (LEN=2) :: mask_char, suffix
[82]	91	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	92	CHARACTER (LEN=30) :: filename
	93	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	94	avs_data_file_localname
	95	CHARACTER (LEN=80) :: rtext
	96	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	97	batch_scp, zeile
	98	CHARACTER (LEN=400) :: command
	99
	100	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
	101	j, k, legpos = 1, timodex = 1
	102	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
	103
	104	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	105	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	106	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	107
	108	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	109	sizex = 250.0, sizey = 40.0, texfac = 1.5
	110
	111	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	112	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	113
	114
	115	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
	116	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
	117	rand, rlegfak, sizex, sizey, texfac, &
	118	timodex, twoxa, twoya, xtext
	119
	120
	121	!
	122	!-- Immediate return if file already open
	123	IF ( openfile(file_id)%opened ) RETURN
	124
[809]	125	#if ! defined ( __check )
[1]	126	!
	127	!-- Only certain files are allowed to be re-opened
	128	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	129	!-- has not been checked so far, if it works!
	130	IF ( openfile(file_id)%opened_before ) THEN
	131	SELECT CASE ( file_id )
[143]	132	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	133	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	134	message_string = 're-open of unit ' // &
[274]	135	'14 is not verified. Please check results!'
[247]	136	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	137	ENDIF
[143]	138
[1]	139	CASE DEFAULT
[247]	140	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	141	' is not allowed'
[247]	142	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	143
[1]	144	RETURN
[143]	145
[1]	146	END SELECT
	147	ENDIF
[807]	148	#endif
[1]	149
	150	!
	151	!-- Check if file may be opened on the relevant PE
	152	SELECT CASE ( file_id )
	153
[493]	154	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
[410]	155
[493]	156	IF ( myid /= 0 ) THEN
	157	WRITE( message_string, * ) 'opening file-id ',file_id, &
	158	' not allowed for PE ',myid
	159	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	160	ENDIF
	161
[564]	162	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	163
	164	IF ( netcdf_data_format < 3 ) THEN
[247]	165
[410]	166	IF ( myid /= 0 ) THEN
	167	WRITE( message_string, * ) 'opening file-id ',file_id, &
	168	' not allowed for PE ',myid
	169	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	170	ENDIF
	171
[493]	172	ENDIF
[1]	173
	174	CASE ( 21, 22, 23 )
	175
	176	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	177	IF ( myid /= 0 ) THEN
[247]	178	WRITE( message_string, * ) 'opening file-id ',file_id, &
	179	' not allowed for PE ',myid
[277]	180	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	181	END IF
[1]	182	ENDIF
	183
	184	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	185
	186	!
	187	!-- File-ids that are used temporarily in other routines
[247]	188	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	189	' is not allowed since it is used otherwise'
[247]	190	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	191
[1]	192	END SELECT
	193
	194	!
	195	!-- Open relevant files
	196	SELECT CASE ( file_id )
	197
	198	CASE ( 11 )
	199
[807]	200	#if defined ( __check )
	201	!
	202	!-- In case of a prior parameter file check, the p3d data is stored in
	203	!-- PARIN, while the p3df is stored in PARINF. This only applies to
	204	!-- check_namelist_files!
	205	IF ( check_restart == 2 ) THEN
	206	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
	207	STATUS='OLD' )
	208	ELSE
	209	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	210	STATUS='OLD' )
	211	END IF
	212	#else
	213
[102]	214	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	215	STATUS='OLD' )
[807]	216	#endif
[1]	217
	218	CASE ( 13 )
	219
	220	IF ( myid_char == '' ) THEN
[102]	221	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	222	FORM='UNFORMATTED', STATUS='OLD' )
[1]	223	ELSE
[143]	224	!
	225	!-- First opening of unit 13 openes file _0000 on all PEs because only
	226	!-- this file contains the global variables
	227	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	228	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	229	FORM='UNFORMATTED', STATUS='OLD' )
	230	ELSE
	231	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	232	FORM='UNFORMATTED', STATUS='OLD' )
	233	ENDIF
[1]	234	ENDIF
	235
	236	CASE ( 14 )
	237
	238	IF ( myid_char == '' ) THEN
[102]	239	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	240	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	241	ELSE
	242	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	243	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	244	ENDIF
[809]	245	#if defined( __parallel ) && ! defined ( __check )
[1]	246	!
	247	!-- Set a barrier in order to allow that all other processors in the
	248	!-- directory created by PE0 can open their file
	249	CALL MPI_BARRIER( comm2d, ierr )
	250	#endif
[146]	251	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[102]	252	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	253	ENDIF
	254
	255	CASE ( 15 )
	256
[102]	257	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	258
	259	CASE ( 16 )
	260
[102]	261	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	262
	263	CASE ( 17 )
	264
[102]	265	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	266
	267	CASE ( 18 )
	268
[102]	269	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	270
	271	CASE ( 19 )
	272
[102]	273	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	274
	275	CASE ( 20 )
	276
	277	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	278	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	279	ENDIF
	280	IF ( myid_char == '' ) THEN
[105]	281	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	282	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	283	ELSE
[809]	284	#if defined( __parallel ) && ! defined ( __check )
[1]	285	!
	286	!-- Set a barrier in order to allow that all other processors in the
	287	!-- directory created by PE0 can open their file
	288	CALL MPI_BARRIER( comm2d, ierr )
	289	#endif
[105]	290	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	291	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	292	ENDIF
	293
	294	CASE ( 21 )
	295
	296	IF ( data_output_2d_on_each_pe ) THEN
[105]	297	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	298	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	299	ELSE
[102]	300	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	301	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	302	ENDIF
	303
	304	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	305	!
	306	!-- Output for combine_plot_fields
	307	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	308	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	309	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	310	ENDIF
	311	!
	312	!-- Determine and write ISO2D coordiante header
	313	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	314	hu = 0.0
	315	ho = (ny+1) * dy
	316	DO i = 1, ny
	317	eta(i) = REAL( i ) / ( ny + 1.0 )
	318	ENDDO
	319	eta(0) = 0.0
	320	eta(ny+1) = 1.0
	321
	322	WRITE (21) dx,eta,hu,ho
	323	DEALLOCATE( eta, ho, hu )
	324
	325	!
	326	!-- Create output file for local parameters
	327	IF ( iso2d_output ) THEN
[102]	328	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	329	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	330	openfile(27)%opened = .TRUE.
	331	ENDIF
	332
	333	ENDIF
	334
	335	CASE ( 22 )
	336
	337	IF ( data_output_2d_on_each_pe ) THEN
[105]	338	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	339	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	340	ELSE
[102]	341	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	342	POSITION='APPEND' )
	343	ENDIF
	344
	345	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	346	!
	347	!-- Output for combine_plot_fields
	348	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	349	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	350	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	351	ENDIF
	352	!
	353	!-- Determine and write ISO2D coordiante header
	354	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	355	hu = 0.0
	356	ho = zu(nz+1)
	357	DO i = 1, nz
	358	eta(i) = REAL( zu(i) ) / zu(nz+1)
	359	ENDDO
	360	eta(0) = 0.0
	361	eta(nz+1) = 1.0
	362
	363	WRITE (22) dx,eta,hu,ho
	364	DEALLOCATE( eta, ho, hu )
	365	!
	366	!-- Create output file for local parameters
[102]	367	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	368	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	369	openfile(28)%opened = .TRUE.
	370
	371	ENDIF
	372
	373	CASE ( 23 )
	374
	375	IF ( data_output_2d_on_each_pe ) THEN
[105]	376	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	377	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	378	ELSE
[102]	379	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	380	POSITION='APPEND' )
	381	ENDIF
	382
	383	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	384	!
	385	!-- Output for combine_plot_fields
	386	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	387	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	388	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	389	ENDIF
	390	!
	391	!-- Determine and write ISO2D coordiante header
	392	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	393	hu = 0.0
	394	ho = zu(nz+1)
	395	DO i = 1, nz
	396	eta(i) = REAL( zu(i) ) / zu(nz+1)
	397	ENDDO
	398	eta(0) = 0.0
	399	eta(nz+1) = 1.0
	400
	401	WRITE (23) dx,eta,hu,ho
	402	DEALLOCATE( eta, ho, hu )
	403	!
	404	!-- Create output file for local parameters
[102]	405	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	406	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	407	openfile(29)%opened = .TRUE.
	408
	409	ENDIF
	410
	411	CASE ( 30 )
	412
[105]	413	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	414	FORM='UNFORMATTED' )
[1]	415	!
	416	!-- Write coordinate file for AVS
	417	IF ( myid == 0 ) THEN
	418	#if defined( __parallel )
	419	!
	420	!-- Specifications for combine_plot_fields
	421	IF ( .NOT. do3d_compress ) THEN
[667]	422	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
[1]	423	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	424	ENDIF
	425	#endif
	426	!
	427	!-- Write coordinate file for AVS:
	428	!-- First determine file names (including cyle numbers) of AVS files on
	429	!-- target machine (to which the files are to be transferred).
	430	!-- Therefore path information has to be obtained first.
	431	IF ( avs_output ) THEN
[82]	432	iaddres = LEN_TRIM( return_addres )
	433	iusern = LEN_TRIM( return_username )
[1]	434
	435	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	436	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	437	.NOT. avs_data_file_found )
	438
	439	READ ( 3, '(A)', END=1 ) zeile
	440
	441	SELECT CASE ( zeile(1:11) )
	442
	443	CASE ( 'PLOT3D_COOR' )
	444	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	445	avs_coor_file_localname
	446	avs_coor_file_found = .TRUE.
	447
	448	CASE ( 'PLOT3D_DATA' )
	449	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	450	avs_data_file_localname
	451	avs_data_file_found = .TRUE.
	452
	453	CASE DEFAULT
	454	READ ( 3, '(A/A)' ) zeile, zeile
	455
	456	END SELECT
	457
	458	ENDDO
	459	!
	460	!-- Now the cycle numbers on the remote machine must be obtained
	461	!-- using batch_scp
	462	1 CLOSE ( 3 )
	463	IF ( .NOT. avs_coor_file_found .OR. &
	464	.NOT. avs_data_file_found ) THEN
[274]	465	message_string= 'no filename for AVS-data-file ' // &
	466	'found in MRUN-config-file' // &
[247]	467	' &filename in FLD-file set to "unknown"'
	468	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	469
	470	avs_coor_file = 'unknown'
	471	avs_data_file = 'unknown'
	472	ELSE
	473	get_filenames = .TRUE.
	474	IF ( TRIM( host ) == 'hpmuk' .OR. &
	475	TRIM( host ) == 'lcmuk' ) THEN
	476	batch_scp = '/home/raasch/pub/batch_scp'
	477	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	478	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	479	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	480	TRIM( host ) == 'ibmb' ) THEN
	481	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	482	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	483	batch_scp = '/home/nhbksira/pub/batch_scp'
	484	ELSE
[247]	485	message_string= 'no path for batch_scp on host "' // &
	486	TRIM( host ) // '"'
	487	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	488	get_filenames = .FALSE.
	489	ENDIF
	490
	491	IF ( get_filenames ) THEN
	492	!
	493	!-- Determine the coordinate file name.
	494	!-- /etc/passwd serves as Dummy-Datei, because it is not
	495	!-- really transferred.
	496	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	497	return_username(1:iusern) // ' ' // &
[1]	498	return_addres(1:iaddres) // ' /etc/passwd "' // &
	499	TRIM( avs_coor_file_catalog ) // '" ' // &
	500	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	501
	502	CALL local_system( command )
	503	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	504	READ ( 3, '(A)' ) avs_coor_file
	505	CLOSE ( 3 )
	506	!
	507	!-- Determine the data file name
	508	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	509	return_username(1:iusern) // ' ' // &
[1]	510	return_addres(1:iaddres) // ' /etc/passwd "' // &
	511	TRIM( avs_data_file_catalog ) // '" ' // &
	512	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	513
	514	CALL local_system( command )
	515	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	516	READ ( 3, '(A)' ) avs_data_file
	517	CLOSE ( 3 )
	518
	519	ELSE
	520
	521	avs_coor_file = 'unknown'
	522	avs_data_file = 'unknown'
	523
	524	ENDIF
	525
	526	ENDIF
	527
	528	!
	529	!-- Output of the coordinate file description for FLD-file
	530	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	531	openfile(33)%opened = .TRUE.
	532	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
[667]	533	TRIM( avs_coor_file ), (nx+2nbgp)4, &
	534	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
[1]	535
	536
	537	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	538	DO i = 0, nx+1
	539	xkoor(i) = i * dx
	540	ENDDO
	541	DO j = 0, ny+1
	542	ykoor(j) = j * dy
	543	ENDDO
	544	DO k = 0, nz_do3d
	545	zkoor(k) = zu(k)
	546	ENDDO
	547
	548	!
	549	!-- Create and write on AVS coordinate file
	550	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	551	openfile(31)%opened = .TRUE.
	552
	553	WRITE (31) xkoor, ykoor, zkoor
	554	DEALLOCATE( xkoor, ykoor, zkoor )
	555
	556	!
	557	!-- Create FLD file (being written on in close_file)
	558	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	559	openfile(32)%opened = .TRUE.
	560
	561	!
	562	!-- Create flag file for compressed 3D output,
	563	!-- influences output commands in mrun
	564	IF ( do3d_compress ) THEN
	565	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	566	WRITE ( 3, '(1X)' )
	567	CLOSE ( 3 )
	568	ENDIF
	569
	570	ENDIF
	571
	572	ENDIF
	573
	574	!
	575	!-- In case of data compression output of the coordinates of the
	576	!-- corresponding partial array of a PE only once at the top of the file
	577	IF ( avs_output .AND. do3d_compress ) THEN
[667]	578	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
[1]	579	ENDIF
	580
	581	CASE ( 40:49 )
	582
	583	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
	584	suffix = ''
	585	ELSE
	586	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
	587	ENDIF
[105]	588	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
	589	TRIM( suffix ), &
[102]	590	FORM='FORMATTED' )
[1]	591	!
	592	!-- Write contents comments at the top of the file
	593	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
	594	TRIM( region( file_id - 40 ) )
	595
	596	CASE ( 50:59 )
	597
	598	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	599	suffix = ''
	600	ELSE
	601	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	602	ENDIF
[105]	603	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	604	TRIM( suffix ), &
[102]	605	FORM='FORMATTED', RECL=496 )
[1]	606	!
	607	!-- Write PROFIL parameter file for output of time series
	608	!-- NOTE: To be on the safe side, this output is done at the beginning of
	609	!-- the model run (in case of collapse) and it is repeated in
	610	!-- close_file, then, however, with value ranges for the coordinate
	611	!-- systems
	612	!
	613	!-- Firstly determine the number of the coordinate systems to be drawn
	614	cranz = 0
	615	DO j = 1, 10
	616	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	617	ENDDO
	618	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	619	TRIM( region( file_id - 50 ) )
	620	!
	621	!-- Write RAHMEN parameter
[105]	622	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	623	TRIM( suffix ), &
[102]	624	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	625	WRITE ( 90, RAHMEN )
	626	!
	627	!-- Determine and write CROSS parameters for the individual coordinate
	628	!-- systems
	629	DO j = 1, 10
	630	k = cross_ts_number_count(j)
	631	IF ( k /= 0 ) THEN
	632	!
	633	!-- Store curve numbers, colours and line style
	634	klist(1:k) = cross_ts_numbers(1:k,j)
	635	klist(k+1:10) = 999999
	636	cucol(1:k) = linecolors(1:k)
	637	lstyle(1:k) = linestyles(1:k)
	638	!
	639	!-- Write CROSS parameter
	640	WRITE ( 90, CROSS )
	641
	642	ENDIF
	643	ENDDO
	644
	645	CLOSE ( 90 )
	646	!
	647	!-- Write all labels at the top of the data file, but only during the
	648	!-- first run of a sequence of jobs. The following jobs copy the time
	649	!-- series data to the bottom of that file.
	650	IF ( runnr == 0 ) THEN
	651	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	652	' ' // TRIM( region( file_id - 50 ) )
	653	ENDIF
	654
	655
	656	CASE ( 80 )
	657
	658	IF ( myid_char == '' ) THEN
[105]	659	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	660	FORM='FORMATTED', POSITION='APPEND' )
[1]	661	ELSE
	662	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	663	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	664	ENDIF
[809]	665	#if defined( __parallel ) && ! defined ( __check )
[1]	666	!
	667	!-- Set a barrier in order to allow that thereafter all other
	668	!-- processors in the directory created by PE0 can open their file.
	669	!-- WARNING: The following barrier will lead to hanging jobs, if
	670	!-- check_open is first called from routine
	671	!-- allocate_prt_memory!
	672	IF ( .NOT. openfile(80)%opened_before ) THEN
	673	CALL MPI_BARRIER( comm2d, ierr )
	674	ENDIF
	675	#endif
[105]	676	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	677	myid_char, &
[102]	678	FORM='FORMATTED', POSITION='APPEND' )
[1]	679	ENDIF
	680
	681	IF ( .NOT. openfile(80)%opened_before ) THEN
	682	WRITE ( 80, 8000 ) TRIM( run_description_header )
	683	ENDIF
	684
	685	CASE ( 81 )
	686
[102]	687	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	688	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	689
	690	CASE ( 82 )
	691
[102]	692	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	693	POSITION = 'APPEND' )
	694
	695	CASE ( 83 )
	696
[102]	697	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	698	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	699
	700	CASE ( 84 )
	701
[102]	702	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	703	POSITION='APPEND' )
	704
	705	CASE ( 85 )
	706
	707	IF ( myid_char == '' ) THEN
[105]	708	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	709	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	710	ELSE
	711	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	712	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	713	ENDIF
[809]	714	#if defined( __parallel ) && ! defined ( __check )
[1]	715	!
	716	!-- Set a barrier in order to allow that thereafter all other
	717	!-- processors in the directory created by PE0 can open their file
	718	CALL MPI_BARRIER( comm2d, ierr )
	719	#endif
[105]	720	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	721	myid_char, &
[102]	722	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	723	ENDIF
	724
	725	IF ( .NOT. openfile(85)%opened_before ) THEN
	726	WRITE ( 85 ) run_description_header
	727	!
	728	!-- Attention: change version number whenever the output format on
	729	!-- unit 85 is changed (see also in routine advec_particles)
	730	rtext = 'data format version 3.0'
	731	WRITE ( 85 ) rtext
	732	WRITE ( 85 ) number_of_particle_groups, &
	733	max_number_of_particle_groups
	734	WRITE ( 85 ) particle_groups
	735	ENDIF
	736
	737	#if defined( __netcdf )
	738	CASE ( 101, 111 )
	739	!
	740	!-- Set filename depending on unit number
	741	IF ( file_id == 101 ) THEN
[102]	742	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	743	av = 0
	744	ELSE
[102]	745	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	746	av = 1
	747	ENDIF
	748	!
	749	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	750	!-- be opened for extension, if its dimensions and variables match the
	751	!-- actual run.
	752	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	753
	754	IF ( netcdf_extend ) THEN
	755	!
[493]	756	!-- Open an existing NetCDF file for output
[600]	757	IF ( netcdf_data_format < 3 ) THEN
	758	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
	759	ELSE
[493]	760	#if defined( __netcdf4 )
[600]	761	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
	762	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	763	#endif
[600]	764	ENDIF
[263]	765
	766	CALL handle_netcdf_error( 'check_open', 20 )
[1]	767	!
	768	!-- Read header information and set all ids. If there is a mismatch
	769	!-- between the previuos and the actual run, netcdf_extend is returned
	770	!-- as .FALSE.
	771	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	772
	773	!
	774	!-- Remove the local file, if it can not be extended
	775	IF ( .NOT. netcdf_extend ) THEN
	776	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	777	CALL handle_netcdf_error( 'check_open', 21 )
[493]	778	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	779	ENDIF
	780
	781	ENDIF
	782
	783	IF ( .NOT. netcdf_extend ) THEN
	784	!
[493]	785	!-- Create a new NetCDF output file with requested NetCDF format
	786	IF ( netcdf_data_format == 1 ) THEN
	787	!
	788	!-- Classic NetCDF format
	789	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	790
	791	ELSEIF ( netcdf_data_format == 2 ) THEN
	792	!
	793	!-- 64bit-offset format
[1]	794	nc_stat = NF90_CREATE( filename, &
	795	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	796	id_set_xy(av) )
[247]	797
[493]	798	#if defined( __netcdf4 )
	799	ELSEIF ( netcdf_data_format == 3 ) THEN
	800	!
	801	!-- NetCDF4/HDF5 format
	802	nc_stat = NF90_CREATE( filename, &
	803	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	804	id_set_xy(av), COMM = comm2d, &
	805	INFO = MPI_INFO_NULL )
	806
	807	ELSEIF ( netcdf_data_format == 4 ) THEN
	808	!
	809	!-- NetCDF4/HDF5 format with classic model flag
	810	nc_stat = NF90_CREATE( filename, &
	811	OR( NF90_NOCLOBBER, &
	812	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	813	id_set_xy(av), COMM = comm2d, &
	814	INFO = MPI_INFO_NULL )
[1]	815	#endif
	816	ENDIF
[493]	817
[263]	818	CALL handle_netcdf_error( 'check_open', 22 )
[493]	819
[1]	820	!
	821	!-- Define the header
	822	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	823
[493]	824	!
	825	!-- In case of parallel NetCDF output, create flag file which tells
	826	!-- combine_plot_fields that nothing is to do.
	827	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	828	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	829	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	830	CLOSE( 99 )
	831	ENDIF
	832
[1]	833	ENDIF
	834
	835	CASE ( 102, 112 )
	836	!
	837	!-- Set filename depending on unit number
	838	IF ( file_id == 102 ) THEN
[102]	839	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	840	av = 0
	841	ELSE
[102]	842	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	843	av = 1
	844	ENDIF
	845	!
	846	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	847	!-- be opened for extension, if its dimensions and variables match the
	848	!-- actual run.
	849	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	850
	851	IF ( netcdf_extend ) THEN
	852	!
[600]	853	!-- Open an existing NetCDF file for output
	854	IF ( netcdf_data_format < 3 ) THEN
	855	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
	856	ELSE
[493]	857	#if defined( __netcdf4 )
[600]	858	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
	859	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	860	#endif
[600]	861	ENDIF
	862
[263]	863	CALL handle_netcdf_error( 'check_open', 23 )
[1]	864	!
	865	!-- Read header information and set all ids. If there is a mismatch
	866	!-- between the previuos and the actual run, netcdf_extend is returned
	867	!-- as .FALSE.
	868	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	869
	870	!
	871	!-- Remove the local file, if it can not be extended
	872	IF ( .NOT. netcdf_extend ) THEN
	873	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	874	CALL handle_netcdf_error( 'check_open', 24 )
[493]	875	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	876	ENDIF
	877
	878	ENDIF
	879
	880	IF ( .NOT. netcdf_extend ) THEN
	881	!
[493]	882	!-- Create a new NetCDF output file with requested NetCDF format
	883	IF ( netcdf_data_format == 1 ) THEN
	884	!
	885	!-- Classic NetCDF format
	886	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	887
	888	ELSEIF ( netcdf_data_format == 2 ) THEN
	889	!
	890	!-- 64bit-offset format
[1]	891	nc_stat = NF90_CREATE( filename, &
	892	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	893	id_set_xz(av) )
[493]	894
	895	#if defined( __netcdf4 )
	896	ELSEIF ( netcdf_data_format == 3 ) THEN
	897	!
	898	!-- NetCDF4/HDF5 format
	899	nc_stat = NF90_CREATE( filename, &
	900	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	901	id_set_xz(av), COMM = comm2d, &
	902	INFO = MPI_INFO_NULL )
	903
	904	ELSEIF ( netcdf_data_format == 4 ) THEN
	905	!
	906	!-- NetCDF4/HDF5 format with classic model flag
	907	nc_stat = NF90_CREATE( filename, &
	908	OR( NF90_NOCLOBBER, &
	909	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	910	id_set_xz(av), COMM = comm2d, &
	911	INFO = MPI_INFO_NULL )
[1]	912	#endif
	913	ENDIF
[493]	914
[263]	915	CALL handle_netcdf_error( 'check_open', 25 )
[493]	916
[1]	917	!
	918	!-- Define the header
	919	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	920
[493]	921	!
	922	!-- In case of parallel NetCDF output, create flag file which tells
	923	!-- combine_plot_fields that nothing is to do.
	924	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	925	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	926	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	927	CLOSE( 99 )
	928	ENDIF
	929
[1]	930	ENDIF
	931
	932	CASE ( 103, 113 )
	933	!
	934	!-- Set filename depending on unit number
	935	IF ( file_id == 103 ) THEN
[102]	936	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	937	av = 0
	938	ELSE
[102]	939	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	940	av = 1
	941	ENDIF
	942	!
	943	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	944	!-- be opened for extension, if its dimensions and variables match the
	945	!-- actual run.
	946	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	947
	948	IF ( netcdf_extend ) THEN
	949	!
[600]	950	!-- Open an existing NetCDF file for output
	951	IF ( netcdf_data_format < 3 ) THEN
	952	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
	953	ELSE
[493]	954	#if defined( __netcdf4 )
[600]	955	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
	956	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	957	#endif
[600]	958	ENDIF
[667]	959
[263]	960	CALL handle_netcdf_error( 'check_open', 26 )
[1]	961	!
	962	!-- Read header information and set all ids. If there is a mismatch
	963	!-- between the previuos and the actual run, netcdf_extend is returned
	964	!-- as .FALSE.
	965	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	966
	967	!
	968	!-- Remove the local file, if it can not be extended
	969	IF ( .NOT. netcdf_extend ) THEN
	970	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	971	CALL handle_netcdf_error( 'check_open', 27 )
[493]	972	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	973	ENDIF
	974
	975	ENDIF
	976
	977	IF ( .NOT. netcdf_extend ) THEN
	978	!
[493]	979	!-- Create a new NetCDF output file with requested NetCDF format
	980	IF ( netcdf_data_format == 1 ) THEN
	981	!
	982	!-- Classic NetCDF format
	983	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	984
	985	ELSEIF ( netcdf_data_format == 2 ) THEN
	986	!
	987	!-- 64bit-offset format
[1]	988	nc_stat = NF90_CREATE( filename, &
[493]	989	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
[1]	990	id_set_yz(av) )
[493]	991
	992	#if defined( __netcdf4 )
	993	ELSEIF ( netcdf_data_format == 3 ) THEN
	994	!
	995	!-- NetCDF4/HDF5 format
	996	nc_stat = NF90_CREATE( filename, &
	997	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	998	id_set_yz(av), COMM = comm2d, &
	999	INFO = MPI_INFO_NULL )
	1000
	1001	ELSEIF ( netcdf_data_format == 4 ) THEN
	1002	!
	1003	!-- NetCDF4/HDF5 format with classic model flag
	1004	nc_stat = NF90_CREATE( filename, &
	1005	OR( NF90_NOCLOBBER, &
	1006	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1007	id_set_yz(av), COMM = comm2d, &
	1008	INFO = MPI_INFO_NULL )
[1]	1009	#endif
	1010	ENDIF
[493]	1011
[263]	1012	CALL handle_netcdf_error( 'check_open', 28 )
[493]	1013
[1]	1014	!
	1015	!-- Define the header
	1016	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	1017
[493]	1018	!
	1019	!-- In case of parallel NetCDF output, create flag file which tells
	1020	!-- combine_plot_fields that nothing is to do.
	1021	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	1022	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	1023	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1024	CLOSE( 99 )
	1025	ENDIF
	1026
[1]	1027	ENDIF
	1028
	1029	CASE ( 104 )
	1030	!
[102]	1031	!-- Set filename
	1032	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	1033
	1034	!
[1]	1035	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1036	!-- be opened for extension, if its variables match the actual run.
[102]	1037	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1038
	1039	IF ( netcdf_extend ) THEN
	1040	!
	1041	!-- Open an existing NetCDF file for output
[102]	1042	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
[263]	1043	CALL handle_netcdf_error( 'check_open', 29 )
[1]	1044	!
	1045	!-- Read header information and set all ids. If there is a mismatch
	1046	!-- between the previuos and the actual run, netcdf_extend is returned
	1047	!-- as .FALSE.
	1048	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1049
	1050	!
	1051	!-- Remove the local file, if it can not be extended
	1052	IF ( .NOT. netcdf_extend ) THEN
	1053	nc_stat = NF90_CLOSE( id_set_pr )
[263]	1054	CALL handle_netcdf_error( 'check_open', 30 )
[102]	1055	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1056	ENDIF
	1057
	1058	ENDIF
	1059
	1060	IF ( .NOT. netcdf_extend ) THEN
	1061	!
	1062	!-- Create a new NetCDF output file
[493]	1063	IF ( netcdf_data_format > 1 ) THEN
[102]	1064	nc_stat = NF90_CREATE( filename, &
[1]	1065	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1066	id_set_pr )
	1067	ELSE
[102]	1068	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	1069	ENDIF
[263]	1070	CALL handle_netcdf_error( 'check_open', 31 )
[1]	1071	!
	1072	!-- Define the header
	1073	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1074
	1075	ENDIF
	1076
	1077	CASE ( 105 )
	1078	!
[102]	1079	!-- Set filename
	1080	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	1081
	1082	!
[1]	1083	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1084	!-- be opened for extension, if its variables match the actual run.
[102]	1085	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1086
	1087	IF ( netcdf_extend ) THEN
	1088	!
	1089	!-- Open an existing NetCDF file for output
[102]	1090	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
[263]	1091	CALL handle_netcdf_error( 'check_open', 32 )
[1]	1092	!
	1093	!-- Read header information and set all ids. If there is a mismatch
	1094	!-- between the previuos and the actual run, netcdf_extend is returned
	1095	!-- as .FALSE.
	1096	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1097
	1098	!
	1099	!-- Remove the local file, if it can not be extended
	1100	IF ( .NOT. netcdf_extend ) THEN
	1101	nc_stat = NF90_CLOSE( id_set_ts )
[263]	1102	CALL handle_netcdf_error( 'check_open', 33 )
[102]	1103	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1104	ENDIF
	1105
	1106	ENDIF
	1107
	1108	IF ( .NOT. netcdf_extend ) THEN
	1109	!
	1110	!-- Create a new NetCDF output file
[493]	1111	IF ( netcdf_data_format > 1 ) THEN
[102]	1112	nc_stat = NF90_CREATE( filename, &
[1]	1113	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1114	id_set_ts )
	1115	ELSE
[102]	1116	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	1117	ENDIF
[263]	1118	CALL handle_netcdf_error( 'check_open', 34 )
[1]	1119	!
	1120	!-- Define the header
	1121	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1122
	1123	ENDIF
	1124
	1125
	1126	CASE ( 106, 116 )
	1127	!
	1128	!-- Set filename depending on unit number
	1129	IF ( file_id == 106 ) THEN
[102]	1130	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	1131	av = 0
	1132	ELSE
[102]	1133	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	1134	av = 1
	1135	ENDIF
	1136	!
[493]	1137	!-- Inquire, if there is a NetCDF file from a previous run. This should
[1]	1138	!-- be opened for extension, if its dimensions and variables match the
	1139	!-- actual run.
	1140	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1141
	1142	IF ( netcdf_extend ) THEN
	1143	!
[493]	1144	!-- Open an existing NetCDF file for output
[765]	1145	IF ( netcdf_data_format < 3 ) THEN
	1146	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
	1147	ELSE
[493]	1148	#if defined( __netcdf4 )
[765]	1149	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
	1150	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	1151	#endif
[765]	1152	ENDIF
[263]	1153	CALL handle_netcdf_error( 'check_open', 35 )
[1]	1154	!
	1155	!-- Read header information and set all ids. If there is a mismatch
	1156	!-- between the previuos and the actual run, netcdf_extend is returned
	1157	!-- as .FALSE.
	1158	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1159
	1160	!
	1161	!-- Remove the local file, if it can not be extended
	1162	IF ( .NOT. netcdf_extend ) THEN
	1163	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1164	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1165	CALL local_system('rm ' // TRIM( filename ) )
	1166	ENDIF
	1167
	1168	ENDIF
	1169
	1170	IF ( .NOT. netcdf_extend ) THEN
	1171	!
[493]	1172	!-- Create a new NetCDF output file with requested NetCDF format
	1173	IF ( netcdf_data_format == 1 ) THEN
	1174	!
	1175	!-- Classic NetCDF format
	1176	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1177
	1178	ELSEIF ( netcdf_data_format == 2 ) THEN
	1179	!
	1180	!-- 64bit-offset format
[1]	1181	nc_stat = NF90_CREATE( filename, &
	1182	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1183	id_set_3d(av) )
[493]	1184
	1185	#if defined( __netcdf4 )
	1186	ELSEIF ( netcdf_data_format == 3 ) THEN
	1187	!
	1188	!-- NetCDF4/HDF5 format
	1189	nc_stat = NF90_CREATE( filename, &
	1190	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1191	id_set_3d(av), COMM = comm2d, &
	1192	INFO = MPI_INFO_NULL )
	1193
	1194	ELSEIF ( netcdf_data_format == 4 ) THEN
	1195	!
	1196	!-- NetCDF4/HDF5 format with classic model flag
	1197	nc_stat = NF90_CREATE( filename, &
	1198	OR( NF90_NOCLOBBER, &
	1199	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1200	id_set_3d(av), COMM = comm2d, &
	1201	INFO = MPI_INFO_NULL )
[1]	1202	#endif
	1203	ENDIF
[493]	1204
[263]	1205	CALL handle_netcdf_error( 'check_open', 37 )
[493]	1206
[1]	1207	!
	1208	!-- Define the header
	1209	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1210
[493]	1211	!
	1212	!-- In case of parallel NetCDF output, create flag file which tells
	1213	!-- combine_plot_fields that nothing is to do.
	1214	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	1215	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1216	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1217	CLOSE( 99 )
	1218	ENDIF
	1219
[1]	1220	ENDIF
	1221
	1222
	1223	CASE ( 107 )
	1224	!
[102]	1225	!-- Set filename
	1226	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1227
	1228	!
[1]	1229	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1230	!-- be opened for extension, if its variables match the actual run.
[102]	1231	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1232
	1233	IF ( netcdf_extend ) THEN
	1234	!
	1235	!-- Open an existing NetCDF file for output
[102]	1236	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
[263]	1237	CALL handle_netcdf_error( 'check_open', 38 )
	1238
[1]	1239	!
	1240	!-- Read header information and set all ids. If there is a mismatch
	1241	!-- between the previuos and the actual run, netcdf_extend is returned
	1242	!-- as .FALSE.
	1243	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1244
	1245	!
	1246	!-- Remove the local file, if it can not be extended
	1247	IF ( .NOT. netcdf_extend ) THEN
	1248	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1249	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1250	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1251	ENDIF
	1252
	1253	ENDIF
	1254
	1255	IF ( .NOT. netcdf_extend ) THEN
	1256	!
	1257	!-- Create a new NetCDF output file
[493]	1258	IF ( netcdf_data_format > 1 ) THEN
[102]	1259	nc_stat = NF90_CREATE( filename, &
[1]	1260	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1261	id_set_sp )
	1262	ELSE
[102]	1263	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1264	ENDIF
[263]	1265	CALL handle_netcdf_error( 'check_open', 40 )
[1]	1266	!
	1267	!-- Define the header
	1268	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1269
	1270	ENDIF
	1271
	1272
	1273	CASE ( 108 )
	1274
	1275	IF ( myid_char == '' ) THEN
[102]	1276	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1277	ELSE
[105]	1278	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1279	myid_char
[1]	1280	ENDIF
	1281	!
	1282	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1283	!-- be opened for extension, if its variables match the actual run.
	1284	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1285
	1286	IF ( netcdf_extend ) THEN
	1287	!
	1288	!-- Open an existing NetCDF file for output
	1289	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
[263]	1290	CALL handle_netcdf_error( 'check_open', 41 )
[1]	1291	!
	1292	!-- Read header information and set all ids. If there is a mismatch
	1293	!-- between the previuos and the actual run, netcdf_extend is returned
	1294	!-- as .FALSE.
	1295	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1296
	1297	!
	1298	!-- Remove the local file, if it can not be extended
	1299	IF ( .NOT. netcdf_extend ) THEN
	1300	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1301	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1302	CALL local_system( 'rm ' // filename )
	1303	ENDIF
	1304
	1305	ENDIF
	1306
	1307	IF ( .NOT. netcdf_extend ) THEN
	1308
	1309	!
	1310	!-- For runs on multiple processors create the subdirectory
	1311	IF ( myid_char /= '' ) THEN
	1312	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1313	THEN ! needs modification in case of non-extendable sets
[102]	1314	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1315	TRIM( coupling_char ) // '/' )
[1]	1316	ENDIF
[809]	1317	#if defined( __parallel ) && ! defined ( __check )
[807]	1318	!
[1]	1319	!-- Set a barrier in order to allow that all other processors in the
	1320	!-- directory created by PE0 can open their file
	1321	CALL MPI_BARRIER( comm2d, ierr )
	1322	#endif
	1323	ENDIF
	1324
	1325	!
[519]	1326	!-- Create a new NetCDF output file with requested NetCDF format
	1327	IF ( netcdf_data_format == 1 ) THEN
	1328	!
	1329	!-- Classic NetCDF format
	1330	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1331
	1332	ELSEIF ( netcdf_data_format == 2 ) THEN
	1333	!
	1334	!-- 64bit-offset format
[1]	1335	nc_stat = NF90_CREATE( filename, &
	1336	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1337	id_set_prt )
[519]	1338
	1339	#if defined( __netcdf4 )
	1340	ELSEIF ( netcdf_data_format == 3 ) THEN
	1341	!
	1342	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
	1343	nc_stat = NF90_CREATE( filename, &
	1344	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1345	id_set_prt )
	1346
	1347	ELSEIF ( netcdf_data_format == 4 ) THEN
	1348	!
	1349	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
	1350	!-- output into a single file!
	1351	nc_stat = NF90_CREATE( filename, &
	1352	OR( NF90_NOCLOBBER, &
	1353	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1354	id_set_prt )
	1355	#endif
[1]	1356	ENDIF
[667]	1357
[263]	1358	CALL handle_netcdf_error( 'check_open', 43 )
[1]	1359
	1360	!
	1361	!-- Define the header
	1362	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1363
	1364	ENDIF
	1365
	1366	CASE ( 109 )
	1367	!
[102]	1368	!-- Set filename
	1369	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1370
	1371	!
[1]	1372	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1373	!-- be opened for extension, if its variables match the actual run.
[102]	1374	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1375
	1376	IF ( netcdf_extend ) THEN
	1377	!
	1378	!-- Open an existing NetCDF file for output
[102]	1379	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
[263]	1380	CALL handle_netcdf_error( 'check_open', 393 )
[1]	1381	!
	1382	!-- Read header information and set all ids. If there is a mismatch
	1383	!-- between the previuos and the actual run, netcdf_extend is returned
	1384	!-- as .FALSE.
	1385	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1386
	1387	!
	1388	!-- Remove the local file, if it can not be extended
	1389	IF ( .NOT. netcdf_extend ) THEN
	1390	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1391	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1392	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1393	ENDIF
	1394
	1395	ENDIF
	1396
	1397	IF ( .NOT. netcdf_extend ) THEN
	1398	!
	1399	!-- Create a new NetCDF output file
[493]	1400	IF ( netcdf_data_format > 1 ) THEN
[102]	1401	nc_stat = NF90_CREATE( filename, &
[1]	1402	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1403	id_set_pts )
	1404	ELSE
[102]	1405	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1406	ENDIF
[263]	1407	CALL handle_netcdf_error( 'check_open', 395 )
[1]	1408	!
	1409	!-- Define the header
	1410	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1411
	1412	ENDIF
[410]	1413
[564]	1414	CASE ( 201:200+2*max_masks )
[410]	1415	!
	1416	!-- Set filename depending on unit number
[564]	1417	IF ( file_id <= 200+max_masks ) THEN
	1418	mid = file_id - 200
[410]	1419	WRITE ( mask_char,'(I2.2)') mid
	1420	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
	1421	av = 0
	1422	ELSE
[564]	1423	mid = file_id - (200+max_masks)
[410]	1424	WRITE ( mask_char,'(I2.2)') mid
	1425	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
	1426	coupling_char
	1427	av = 1
	1428	ENDIF
	1429	!
	1430	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1431	!-- be opened for extension, if its dimensions and variables match the
	1432	!-- actual run.
	1433	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1434
	1435	IF ( netcdf_extend ) THEN
	1436	!
	1437	!-- Open an existing NetCDF file for output
	1438	#if defined( __netcdf4 )
[493]	1439	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
	1440	COMM = comm2d, INFO = MPI_INFO_NULL )
[1]	1441	#else
[410]	1442	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
	1443	#endif
[564]	1444	CALL handle_netcdf_error( 'check_open', 456 )
[410]	1445	!
	1446	!-- Read header information and set all ids. If there is a mismatch
	1447	!-- between the previuos and the actual run, netcdf_extend is returned
	1448	!-- as .FALSE.
	1449	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
[1]	1450
[410]	1451	!
	1452	!-- Remove the local file, if it can not be extended
	1453	IF ( .NOT. netcdf_extend ) THEN
	1454	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[564]	1455	CALL handle_netcdf_error( 'check_open', 457 )
[410]	1456	CALL local_system('rm ' // TRIM( filename ) )
	1457	ENDIF
[1]	1458
[410]	1459	ENDIF
	1460
	1461	IF ( .NOT. netcdf_extend ) THEN
[1]	1462	!
[493]	1463	!-- Create a new NetCDF output file with requested NetCDF format
	1464	IF ( netcdf_data_format == 1 ) THEN
	1465	!
	1466	!-- Classic NetCDF format
	1467	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
	1468	id_set_mask(mid,av) )
[410]	1469
[493]	1470	ELSEIF ( netcdf_data_format == 2 ) THEN
	1471	!
	1472	!-- 64bit-offset format
	1473	nc_stat = NF90_CREATE( filename, &
	1474	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1475	id_set_mask(mid,av) )
[410]	1476
	1477
	1478	#if defined( __netcdf4 )
[493]	1479	ELSEIF ( netcdf_data_format == 3 ) THEN
	1480	!
	1481	!-- NetCDF4/HDF5 format
	1482	nc_stat = NF90_CREATE( filename, &
	1483	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1484	id_set_mask(mid,av), COMM = comm2d, &
	1485	INFO = MPI_INFO_NULL )
[410]	1486
[493]	1487	ELSEIF ( netcdf_data_format == 4 ) THEN
	1488	!
	1489	!-- NetCDF4/HDF5 format with classic model flag
	1490	nc_stat = NF90_CREATE( filename, &
	1491	OR( NF90_NOCLOBBER, &
	1492	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1493	id_set_mask(mid,av), COMM = comm2d, &
	1494	INFO = MPI_INFO_NULL )
[410]	1495	#endif
[493]	1496	ENDIF
[410]	1497
[564]	1498	CALL handle_netcdf_error( 'check_open', 458 )
[410]	1499	!
	1500	!-- Define the header
	1501	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
	1502
	1503	ENDIF
	1504
	1505
	1506	#else
	1507
[564]	1508	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1509
	1510	!
[1]	1511	!-- Nothing is done in case of missing netcdf support
	1512	RETURN
	1513
	1514	#endif
	1515
	1516	CASE DEFAULT
	1517
[247]	1518	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1519	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1520
	1521	END SELECT
	1522
	1523	!
	1524	!-- Set open flag
	1525	openfile(file_id)%opened = .TRUE.
	1526
	1527	!
	1528	!-- Formats
	1529	3300 FORMAT ('#'/ &
	1530	'coord 1 file=',A,' filetype=unformatted'/ &
	1531	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1532	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1533	'#')
	1534	4000 FORMAT ('# ',A)
	1535	5000 FORMAT ('# ',A/ &
	1536	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1537	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1538	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1539	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1540	8000 FORMAT (A/ &
	1541	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1542	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1543	103('-'))
	1544
	1545	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |