Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 782

Last change on this file since 782 was 766, checked in by raasch, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 55.9 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
	3	!------------------------------------------------------------------------------!
[247]	4	! Current revisions:
[1]	5	! -----------------
[766]	6	!
[1]	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: check_open.f90 766 2011-10-10 06:29:20Z heinze $
[766]	11	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
[77]	12	!
[668]	13	! 667 2010-12-23 12:06:00Z suehring/gryschka
	14	! Output of total array size was adapted to nbgp.
	15	!
[601]	16	! 600 2010-11-24 16:10:51Z raasch
	17	! bugfix in opening of cross section netcdf-files (parallel opening with
	18	! netcdf4 only works for netcdf_data_format > 2)
	19	!
[565]	20	! 564 2010-09-30 13:18:59Z helmke
	21	! start number of mask output files changed to 201, netcdf message identifiers
	22	! of masked output changed
	23	!
[520]	24	! 519 2010-03-19 05:30:02Z raasch
	25	! NetCDF4 support for particle data
	26	!
[494]	27	! 493 2010-03-01 08:30:24Z raasch
	28	! NetCDF4 support (parallel output)
	29	!
[449]	30	! 410 2009-12-04 17:05:40Z letzel
	31	! masked data output
	32	!
[392]	33	! 277 2009-03-31 09:13:47Z heinze
	34	! Output of NetCDF messages with aid of message handling routine.
	35	! Output of messages replaced by message handling routine
	36	!
[198]	37	! 146 2008-01-17 13:08:34Z raasch
	38	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	39	! because only this file contains the global variables,
	40	! myid_char_14 removed
	41	!
[139]	42	! 120 2007-10-17 11:54:43Z raasch
	43	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
	44	!
[110]	45	! 105 2007-08-08 07:12:55Z raasch
	46	! Different filenames are used in case of a coupled simulation,
	47	! coupling_char added to all relevant filenames
	48	!
[83]	49	! 82 2007-04-16 15:40:52Z raasch
	50	! Call of local_getenv removed, preprocessor directives for old systems removed
	51	!
[77]	52	! 46 2007-03-05 06:00:47Z raasch
	53	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	54	!
[3]	55	! RCS Log replace by Id keyword, revision history cleaned up
	56	!
[1]	57	! Revision 1.44 2006/08/22 13:48:34 raasch
	58	! xz and yz cross sections now up to nzt+1
	59	!
	60	! Revision 1.1 1997/08/11 06:10:55 raasch
	61	! Initial revision
	62	!
	63	!
	64	! Description:
	65	! ------------
	66	! Check if file unit is open. If not, open file and, if necessary, write a
	67	! header or start other initializing actions, respectively.
	68	!------------------------------------------------------------------------------!
	69
	70	USE array_kind
	71	USE arrays_3d
	72	USE control_parameters
	73	USE grid_variables
	74	USE indices
	75	USE netcdf_control
	76	USE particle_attributes
	77	USE pegrid
	78	USE profil_parameter
	79	USE statistics
	80
	81	IMPLICIT NONE
	82
[410]	83	CHARACTER (LEN=2) :: mask_char, suffix
[82]	84	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	85	CHARACTER (LEN=30) :: filename
	86	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	87	avs_data_file_localname
	88	CHARACTER (LEN=80) :: rtext
	89	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	90	batch_scp, zeile
	91	CHARACTER (LEN=400) :: command
	92
	93	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
	94	j, k, legpos = 1, timodex = 1
	95	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
	96
	97	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	98	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	99	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	100
	101	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	102	sizex = 250.0, sizey = 40.0, texfac = 1.5
	103
	104	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	105	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	106
	107
	108	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
	109	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
	110	rand, rlegfak, sizex, sizey, texfac, &
	111	timodex, twoxa, twoya, xtext
	112
	113
	114	!
	115	!-- Immediate return if file already open
	116	IF ( openfile(file_id)%opened ) RETURN
	117
	118	!
	119	!-- Only certain files are allowed to be re-opened
	120	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	121	!-- has not been checked so far, if it works!
	122	IF ( openfile(file_id)%opened_before ) THEN
	123	SELECT CASE ( file_id )
[143]	124	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	125	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	126	message_string = 're-open of unit ' // &
[274]	127	'14 is not verified. Please check results!'
[247]	128	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	129	ENDIF
[143]	130
[1]	131	CASE DEFAULT
[247]	132	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	133	' is not allowed'
[247]	134	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	135
[1]	136	RETURN
[143]	137
[1]	138	END SELECT
	139	ENDIF
	140
	141	!
	142	!-- Check if file may be opened on the relevant PE
	143	SELECT CASE ( file_id )
	144
[493]	145	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
[410]	146
[493]	147	IF ( myid /= 0 ) THEN
	148	WRITE( message_string, * ) 'opening file-id ',file_id, &
	149	' not allowed for PE ',myid
	150	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	151	ENDIF
	152
[564]	153	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	154
	155	IF ( netcdf_data_format < 3 ) THEN
[247]	156
[410]	157	IF ( myid /= 0 ) THEN
	158	WRITE( message_string, * ) 'opening file-id ',file_id, &
	159	' not allowed for PE ',myid
	160	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	161	ENDIF
	162
[493]	163	ENDIF
[1]	164
	165	CASE ( 21, 22, 23 )
	166
	167	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	168	IF ( myid /= 0 ) THEN
[247]	169	WRITE( message_string, * ) 'opening file-id ',file_id, &
	170	' not allowed for PE ',myid
[277]	171	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	172	END IF
[1]	173	ENDIF
	174
	175	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	176
	177	!
	178	!-- File-ids that are used temporarily in other routines
[247]	179	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	180	' is not allowed since it is used otherwise'
[247]	181	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	182
[1]	183	END SELECT
	184
	185	!
	186	!-- Open relevant files
	187	SELECT CASE ( file_id )
	188
	189	CASE ( 11 )
	190
[102]	191	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	192	STATUS='OLD' )
[1]	193
	194	CASE ( 13 )
	195
	196	IF ( myid_char == '' ) THEN
[102]	197	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	198	FORM='UNFORMATTED', STATUS='OLD' )
[1]	199	ELSE
[143]	200	!
	201	!-- First opening of unit 13 openes file _0000 on all PEs because only
	202	!-- this file contains the global variables
	203	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	204	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	205	FORM='UNFORMATTED', STATUS='OLD' )
	206	ELSE
	207	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	208	FORM='UNFORMATTED', STATUS='OLD' )
	209	ENDIF
[1]	210	ENDIF
	211
	212	CASE ( 14 )
	213
	214	IF ( myid_char == '' ) THEN
[102]	215	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	216	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	217	ELSE
	218	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	219	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	220	ENDIF
	221	#if defined( __parallel )
	222	!
	223	!-- Set a barrier in order to allow that all other processors in the
	224	!-- directory created by PE0 can open their file
	225	CALL MPI_BARRIER( comm2d, ierr )
	226	#endif
[146]	227	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[102]	228	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	229	ENDIF
	230
	231	CASE ( 15 )
	232
[102]	233	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	234
	235	CASE ( 16 )
	236
[102]	237	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	238
	239	CASE ( 17 )
	240
[102]	241	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	242
	243	CASE ( 18 )
	244
[102]	245	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	246
	247	CASE ( 19 )
	248
[102]	249	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	250
	251	CASE ( 20 )
	252
	253	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	254	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	255	ENDIF
	256	IF ( myid_char == '' ) THEN
[105]	257	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	258	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	259	ELSE
	260	#if defined( __parallel )
	261	!
	262	!-- Set a barrier in order to allow that all other processors in the
	263	!-- directory created by PE0 can open their file
	264	CALL MPI_BARRIER( comm2d, ierr )
	265	#endif
[105]	266	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	267	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	268	ENDIF
	269
	270	CASE ( 21 )
	271
	272	IF ( data_output_2d_on_each_pe ) THEN
[105]	273	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	274	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	275	ELSE
[102]	276	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	277	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	278	ENDIF
	279
	280	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	281	!
	282	!-- Output for combine_plot_fields
	283	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	284	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	285	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	286	ENDIF
	287	!
	288	!-- Determine and write ISO2D coordiante header
	289	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	290	hu = 0.0
	291	ho = (ny+1) * dy
	292	DO i = 1, ny
	293	eta(i) = REAL( i ) / ( ny + 1.0 )
	294	ENDDO
	295	eta(0) = 0.0
	296	eta(ny+1) = 1.0
	297
	298	WRITE (21) dx,eta,hu,ho
	299	DEALLOCATE( eta, ho, hu )
	300
	301	!
	302	!-- Create output file for local parameters
	303	IF ( iso2d_output ) THEN
[102]	304	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	305	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	306	openfile(27)%opened = .TRUE.
	307	ENDIF
	308
	309	ENDIF
	310
	311	CASE ( 22 )
	312
	313	IF ( data_output_2d_on_each_pe ) THEN
[105]	314	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	315	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	316	ELSE
[102]	317	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	318	POSITION='APPEND' )
	319	ENDIF
	320
	321	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	322	!
	323	!-- Output for combine_plot_fields
	324	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	325	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	326	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	327	ENDIF
	328	!
	329	!-- Determine and write ISO2D coordiante header
	330	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	331	hu = 0.0
	332	ho = zu(nz+1)
	333	DO i = 1, nz
	334	eta(i) = REAL( zu(i) ) / zu(nz+1)
	335	ENDDO
	336	eta(0) = 0.0
	337	eta(nz+1) = 1.0
	338
	339	WRITE (22) dx,eta,hu,ho
	340	DEALLOCATE( eta, ho, hu )
	341	!
	342	!-- Create output file for local parameters
[102]	343	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	344	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	345	openfile(28)%opened = .TRUE.
	346
	347	ENDIF
	348
	349	CASE ( 23 )
	350
	351	IF ( data_output_2d_on_each_pe ) THEN
[105]	352	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	353	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	354	ELSE
[102]	355	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	356	POSITION='APPEND' )
	357	ENDIF
	358
	359	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	360	!
	361	!-- Output for combine_plot_fields
	362	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	363	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	364	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	365	ENDIF
	366	!
	367	!-- Determine and write ISO2D coordiante header
	368	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	369	hu = 0.0
	370	ho = zu(nz+1)
	371	DO i = 1, nz
	372	eta(i) = REAL( zu(i) ) / zu(nz+1)
	373	ENDDO
	374	eta(0) = 0.0
	375	eta(nz+1) = 1.0
	376
	377	WRITE (23) dx,eta,hu,ho
	378	DEALLOCATE( eta, ho, hu )
	379	!
	380	!-- Create output file for local parameters
[102]	381	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	382	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	383	openfile(29)%opened = .TRUE.
	384
	385	ENDIF
	386
	387	CASE ( 30 )
	388
[105]	389	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	390	FORM='UNFORMATTED' )
[1]	391	!
	392	!-- Write coordinate file for AVS
	393	IF ( myid == 0 ) THEN
	394	#if defined( __parallel )
	395	!
	396	!-- Specifications for combine_plot_fields
	397	IF ( .NOT. do3d_compress ) THEN
[667]	398	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
[1]	399	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	400	ENDIF
	401	#endif
	402	!
	403	!-- Write coordinate file for AVS:
	404	!-- First determine file names (including cyle numbers) of AVS files on
	405	!-- target machine (to which the files are to be transferred).
	406	!-- Therefore path information has to be obtained first.
	407	IF ( avs_output ) THEN
[82]	408	iaddres = LEN_TRIM( return_addres )
	409	iusern = LEN_TRIM( return_username )
[1]	410
	411	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	412	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	413	.NOT. avs_data_file_found )
	414
	415	READ ( 3, '(A)', END=1 ) zeile
	416
	417	SELECT CASE ( zeile(1:11) )
	418
	419	CASE ( 'PLOT3D_COOR' )
	420	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	421	avs_coor_file_localname
	422	avs_coor_file_found = .TRUE.
	423
	424	CASE ( 'PLOT3D_DATA' )
	425	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	426	avs_data_file_localname
	427	avs_data_file_found = .TRUE.
	428
	429	CASE DEFAULT
	430	READ ( 3, '(A/A)' ) zeile, zeile
	431
	432	END SELECT
	433
	434	ENDDO
	435	!
	436	!-- Now the cycle numbers on the remote machine must be obtained
	437	!-- using batch_scp
	438	1 CLOSE ( 3 )
	439	IF ( .NOT. avs_coor_file_found .OR. &
	440	.NOT. avs_data_file_found ) THEN
[274]	441	message_string= 'no filename for AVS-data-file ' // &
	442	'found in MRUN-config-file' // &
[247]	443	' &filename in FLD-file set to "unknown"'
	444	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	445
	446	avs_coor_file = 'unknown'
	447	avs_data_file = 'unknown'
	448	ELSE
	449	get_filenames = .TRUE.
	450	IF ( TRIM( host ) == 'hpmuk' .OR. &
	451	TRIM( host ) == 'lcmuk' ) THEN
	452	batch_scp = '/home/raasch/pub/batch_scp'
	453	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	454	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	455	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	456	TRIM( host ) == 'ibmb' ) THEN
	457	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	458	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	459	batch_scp = '/home/nhbksira/pub/batch_scp'
	460	ELSE
[247]	461	message_string= 'no path for batch_scp on host "' // &
	462	TRIM( host ) // '"'
	463	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	464	get_filenames = .FALSE.
	465	ENDIF
	466
	467	IF ( get_filenames ) THEN
	468	!
	469	!-- Determine the coordinate file name.
	470	!-- /etc/passwd serves as Dummy-Datei, because it is not
	471	!-- really transferred.
	472	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	473	return_username(1:iusern) // ' ' // &
[1]	474	return_addres(1:iaddres) // ' /etc/passwd "' // &
	475	TRIM( avs_coor_file_catalog ) // '" ' // &
	476	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	477
	478	CALL local_system( command )
	479	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	480	READ ( 3, '(A)' ) avs_coor_file
	481	CLOSE ( 3 )
	482	!
	483	!-- Determine the data file name
	484	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	485	return_username(1:iusern) // ' ' // &
[1]	486	return_addres(1:iaddres) // ' /etc/passwd "' // &
	487	TRIM( avs_data_file_catalog ) // '" ' // &
	488	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	489
	490	CALL local_system( command )
	491	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	492	READ ( 3, '(A)' ) avs_data_file
	493	CLOSE ( 3 )
	494
	495	ELSE
	496
	497	avs_coor_file = 'unknown'
	498	avs_data_file = 'unknown'
	499
	500	ENDIF
	501
	502	ENDIF
	503
	504	!
	505	!-- Output of the coordinate file description for FLD-file
	506	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	507	openfile(33)%opened = .TRUE.
	508	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
[667]	509	TRIM( avs_coor_file ), (nx+2nbgp)4, &
	510	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
[1]	511
	512
	513	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	514	DO i = 0, nx+1
	515	xkoor(i) = i * dx
	516	ENDDO
	517	DO j = 0, ny+1
	518	ykoor(j) = j * dy
	519	ENDDO
	520	DO k = 0, nz_do3d
	521	zkoor(k) = zu(k)
	522	ENDDO
	523
	524	!
	525	!-- Create and write on AVS coordinate file
	526	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	527	openfile(31)%opened = .TRUE.
	528
	529	WRITE (31) xkoor, ykoor, zkoor
	530	DEALLOCATE( xkoor, ykoor, zkoor )
	531
	532	!
	533	!-- Create FLD file (being written on in close_file)
	534	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	535	openfile(32)%opened = .TRUE.
	536
	537	!
	538	!-- Create flag file for compressed 3D output,
	539	!-- influences output commands in mrun
	540	IF ( do3d_compress ) THEN
	541	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	542	WRITE ( 3, '(1X)' )
	543	CLOSE ( 3 )
	544	ENDIF
	545
	546	ENDIF
	547
	548	ENDIF
	549
	550	!
	551	!-- In case of data compression output of the coordinates of the
	552	!-- corresponding partial array of a PE only once at the top of the file
	553	IF ( avs_output .AND. do3d_compress ) THEN
[667]	554	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
[1]	555	ENDIF
	556
	557	CASE ( 40:49 )
	558
	559	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
	560	suffix = ''
	561	ELSE
	562	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
	563	ENDIF
[105]	564	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
	565	TRIM( suffix ), &
[102]	566	FORM='FORMATTED' )
[1]	567	!
	568	!-- Write contents comments at the top of the file
	569	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
	570	TRIM( region( file_id - 40 ) )
	571
	572	CASE ( 50:59 )
	573
	574	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	575	suffix = ''
	576	ELSE
	577	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	578	ENDIF
[105]	579	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	580	TRIM( suffix ), &
[102]	581	FORM='FORMATTED', RECL=496 )
[1]	582	!
	583	!-- Write PROFIL parameter file for output of time series
	584	!-- NOTE: To be on the safe side, this output is done at the beginning of
	585	!-- the model run (in case of collapse) and it is repeated in
	586	!-- close_file, then, however, with value ranges for the coordinate
	587	!-- systems
	588	!
	589	!-- Firstly determine the number of the coordinate systems to be drawn
	590	cranz = 0
	591	DO j = 1, 10
	592	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	593	ENDDO
	594	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	595	TRIM( region( file_id - 50 ) )
	596	!
	597	!-- Write RAHMEN parameter
[105]	598	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	599	TRIM( suffix ), &
[102]	600	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	601	WRITE ( 90, RAHMEN )
	602	!
	603	!-- Determine and write CROSS parameters for the individual coordinate
	604	!-- systems
	605	DO j = 1, 10
	606	k = cross_ts_number_count(j)
	607	IF ( k /= 0 ) THEN
	608	!
	609	!-- Store curve numbers, colours and line style
	610	klist(1:k) = cross_ts_numbers(1:k,j)
	611	klist(k+1:10) = 999999
	612	cucol(1:k) = linecolors(1:k)
	613	lstyle(1:k) = linestyles(1:k)
	614	!
	615	!-- Write CROSS parameter
	616	WRITE ( 90, CROSS )
	617
	618	ENDIF
	619	ENDDO
	620
	621	CLOSE ( 90 )
	622	!
	623	!-- Write all labels at the top of the data file, but only during the
	624	!-- first run of a sequence of jobs. The following jobs copy the time
	625	!-- series data to the bottom of that file.
	626	IF ( runnr == 0 ) THEN
	627	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	628	' ' // TRIM( region( file_id - 50 ) )
	629	ENDIF
	630
	631
	632	CASE ( 80 )
	633
	634	IF ( myid_char == '' ) THEN
[105]	635	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	636	FORM='FORMATTED', POSITION='APPEND' )
[1]	637	ELSE
	638	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	639	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	640	ENDIF
	641	#if defined( __parallel )
	642	!
	643	!-- Set a barrier in order to allow that thereafter all other
	644	!-- processors in the directory created by PE0 can open their file.
	645	!-- WARNING: The following barrier will lead to hanging jobs, if
	646	!-- check_open is first called from routine
	647	!-- allocate_prt_memory!
	648	IF ( .NOT. openfile(80)%opened_before ) THEN
	649	CALL MPI_BARRIER( comm2d, ierr )
	650	ENDIF
	651	#endif
[105]	652	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	653	myid_char, &
[102]	654	FORM='FORMATTED', POSITION='APPEND' )
[1]	655	ENDIF
	656
	657	IF ( .NOT. openfile(80)%opened_before ) THEN
	658	WRITE ( 80, 8000 ) TRIM( run_description_header )
	659	ENDIF
	660
	661	CASE ( 81 )
	662
[102]	663	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	664	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	665
	666	CASE ( 82 )
	667
[102]	668	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	669	POSITION = 'APPEND' )
	670
	671	CASE ( 83 )
	672
[102]	673	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	674	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	675
	676	CASE ( 84 )
	677
[102]	678	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	679	POSITION='APPEND' )
	680
	681	CASE ( 85 )
	682
	683	IF ( myid_char == '' ) THEN
[105]	684	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	685	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	686	ELSE
	687	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	688	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	689	ENDIF
	690	#if defined( __parallel )
	691	!
	692	!-- Set a barrier in order to allow that thereafter all other
	693	!-- processors in the directory created by PE0 can open their file
	694	CALL MPI_BARRIER( comm2d, ierr )
	695	#endif
[105]	696	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	697	myid_char, &
[102]	698	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	699	ENDIF
	700
	701	IF ( .NOT. openfile(85)%opened_before ) THEN
	702	WRITE ( 85 ) run_description_header
	703	!
	704	!-- Attention: change version number whenever the output format on
	705	!-- unit 85 is changed (see also in routine advec_particles)
	706	rtext = 'data format version 3.0'
	707	WRITE ( 85 ) rtext
	708	WRITE ( 85 ) number_of_particle_groups, &
	709	max_number_of_particle_groups
	710	WRITE ( 85 ) particle_groups
	711	ENDIF
	712
	713	#if defined( __netcdf )
	714	CASE ( 101, 111 )
	715	!
	716	!-- Set filename depending on unit number
	717	IF ( file_id == 101 ) THEN
[102]	718	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	719	av = 0
	720	ELSE
[102]	721	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	722	av = 1
	723	ENDIF
	724	!
	725	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	726	!-- be opened for extension, if its dimensions and variables match the
	727	!-- actual run.
	728	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	729
	730	IF ( netcdf_extend ) THEN
	731	!
[493]	732	!-- Open an existing NetCDF file for output
[600]	733	IF ( netcdf_data_format < 3 ) THEN
	734	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
	735	ELSE
[493]	736	#if defined( __netcdf4 )
[600]	737	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
	738	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	739	#endif
[600]	740	ENDIF
[263]	741
	742	CALL handle_netcdf_error( 'check_open', 20 )
[1]	743	!
	744	!-- Read header information and set all ids. If there is a mismatch
	745	!-- between the previuos and the actual run, netcdf_extend is returned
	746	!-- as .FALSE.
	747	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	748
	749	!
	750	!-- Remove the local file, if it can not be extended
	751	IF ( .NOT. netcdf_extend ) THEN
	752	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	753	CALL handle_netcdf_error( 'check_open', 21 )
[493]	754	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	755	ENDIF
	756
	757	ENDIF
	758
	759	IF ( .NOT. netcdf_extend ) THEN
	760	!
[493]	761	!-- Create a new NetCDF output file with requested NetCDF format
	762	IF ( netcdf_data_format == 1 ) THEN
	763	!
	764	!-- Classic NetCDF format
	765	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	766
	767	ELSEIF ( netcdf_data_format == 2 ) THEN
	768	!
	769	!-- 64bit-offset format
[1]	770	nc_stat = NF90_CREATE( filename, &
	771	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	772	id_set_xy(av) )
[247]	773
[493]	774	#if defined( __netcdf4 )
	775	ELSEIF ( netcdf_data_format == 3 ) THEN
	776	!
	777	!-- NetCDF4/HDF5 format
	778	nc_stat = NF90_CREATE( filename, &
	779	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	780	id_set_xy(av), COMM = comm2d, &
	781	INFO = MPI_INFO_NULL )
	782
	783	ELSEIF ( netcdf_data_format == 4 ) THEN
	784	!
	785	!-- NetCDF4/HDF5 format with classic model flag
	786	nc_stat = NF90_CREATE( filename, &
	787	OR( NF90_NOCLOBBER, &
	788	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	789	id_set_xy(av), COMM = comm2d, &
	790	INFO = MPI_INFO_NULL )
[1]	791	#endif
	792	ENDIF
[493]	793
[263]	794	CALL handle_netcdf_error( 'check_open', 22 )
[493]	795
[1]	796	!
	797	!-- Define the header
	798	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	799
[493]	800	!
	801	!-- In case of parallel NetCDF output, create flag file which tells
	802	!-- combine_plot_fields that nothing is to do.
	803	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	804	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	805	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	806	CLOSE( 99 )
	807	ENDIF
	808
[1]	809	ENDIF
	810
	811	CASE ( 102, 112 )
	812	!
	813	!-- Set filename depending on unit number
	814	IF ( file_id == 102 ) THEN
[102]	815	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	816	av = 0
	817	ELSE
[102]	818	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	819	av = 1
	820	ENDIF
	821	!
	822	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	823	!-- be opened for extension, if its dimensions and variables match the
	824	!-- actual run.
	825	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	826
	827	IF ( netcdf_extend ) THEN
	828	!
[600]	829	!-- Open an existing NetCDF file for output
	830	IF ( netcdf_data_format < 3 ) THEN
	831	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
	832	ELSE
[493]	833	#if defined( __netcdf4 )
[600]	834	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
	835	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	836	#endif
[600]	837	ENDIF
	838
[263]	839	CALL handle_netcdf_error( 'check_open', 23 )
[1]	840	!
	841	!-- Read header information and set all ids. If there is a mismatch
	842	!-- between the previuos and the actual run, netcdf_extend is returned
	843	!-- as .FALSE.
	844	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	845
	846	!
	847	!-- Remove the local file, if it can not be extended
	848	IF ( .NOT. netcdf_extend ) THEN
	849	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	850	CALL handle_netcdf_error( 'check_open', 24 )
[493]	851	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	852	ENDIF
	853
	854	ENDIF
	855
	856	IF ( .NOT. netcdf_extend ) THEN
	857	!
[493]	858	!-- Create a new NetCDF output file with requested NetCDF format
	859	IF ( netcdf_data_format == 1 ) THEN
	860	!
	861	!-- Classic NetCDF format
	862	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	863
	864	ELSEIF ( netcdf_data_format == 2 ) THEN
	865	!
	866	!-- 64bit-offset format
[1]	867	nc_stat = NF90_CREATE( filename, &
	868	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	869	id_set_xz(av) )
[493]	870
	871	#if defined( __netcdf4 )
	872	ELSEIF ( netcdf_data_format == 3 ) THEN
	873	!
	874	!-- NetCDF4/HDF5 format
	875	nc_stat = NF90_CREATE( filename, &
	876	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	877	id_set_xz(av), COMM = comm2d, &
	878	INFO = MPI_INFO_NULL )
	879
	880	ELSEIF ( netcdf_data_format == 4 ) THEN
	881	!
	882	!-- NetCDF4/HDF5 format with classic model flag
	883	nc_stat = NF90_CREATE( filename, &
	884	OR( NF90_NOCLOBBER, &
	885	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	886	id_set_xz(av), COMM = comm2d, &
	887	INFO = MPI_INFO_NULL )
[1]	888	#endif
	889	ENDIF
[493]	890
[263]	891	CALL handle_netcdf_error( 'check_open', 25 )
[493]	892
[1]	893	!
	894	!-- Define the header
	895	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	896
[493]	897	!
	898	!-- In case of parallel NetCDF output, create flag file which tells
	899	!-- combine_plot_fields that nothing is to do.
	900	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	901	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	902	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	903	CLOSE( 99 )
	904	ENDIF
	905
[1]	906	ENDIF
	907
	908	CASE ( 103, 113 )
	909	!
	910	!-- Set filename depending on unit number
	911	IF ( file_id == 103 ) THEN
[102]	912	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	913	av = 0
	914	ELSE
[102]	915	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	916	av = 1
	917	ENDIF
	918	!
	919	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	920	!-- be opened for extension, if its dimensions and variables match the
	921	!-- actual run.
	922	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	923
	924	IF ( netcdf_extend ) THEN
	925	!
[600]	926	!-- Open an existing NetCDF file for output
	927	IF ( netcdf_data_format < 3 ) THEN
	928	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
	929	ELSE
[493]	930	#if defined( __netcdf4 )
[600]	931	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
	932	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	933	#endif
[600]	934	ENDIF
[667]	935
[263]	936	CALL handle_netcdf_error( 'check_open', 26 )
[1]	937	!
	938	!-- Read header information and set all ids. If there is a mismatch
	939	!-- between the previuos and the actual run, netcdf_extend is returned
	940	!-- as .FALSE.
	941	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	942
	943	!
	944	!-- Remove the local file, if it can not be extended
	945	IF ( .NOT. netcdf_extend ) THEN
	946	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	947	CALL handle_netcdf_error( 'check_open', 27 )
[493]	948	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	949	ENDIF
	950
	951	ENDIF
	952
	953	IF ( .NOT. netcdf_extend ) THEN
	954	!
[493]	955	!-- Create a new NetCDF output file with requested NetCDF format
	956	IF ( netcdf_data_format == 1 ) THEN
	957	!
	958	!-- Classic NetCDF format
	959	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	960
	961	ELSEIF ( netcdf_data_format == 2 ) THEN
	962	!
	963	!-- 64bit-offset format
[1]	964	nc_stat = NF90_CREATE( filename, &
[493]	965	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
[1]	966	id_set_yz(av) )
[493]	967
	968	#if defined( __netcdf4 )
	969	ELSEIF ( netcdf_data_format == 3 ) THEN
	970	!
	971	!-- NetCDF4/HDF5 format
	972	nc_stat = NF90_CREATE( filename, &
	973	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	974	id_set_yz(av), COMM = comm2d, &
	975	INFO = MPI_INFO_NULL )
	976
	977	ELSEIF ( netcdf_data_format == 4 ) THEN
	978	!
	979	!-- NetCDF4/HDF5 format with classic model flag
	980	nc_stat = NF90_CREATE( filename, &
	981	OR( NF90_NOCLOBBER, &
	982	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	983	id_set_yz(av), COMM = comm2d, &
	984	INFO = MPI_INFO_NULL )
[1]	985	#endif
	986	ENDIF
[493]	987
[263]	988	CALL handle_netcdf_error( 'check_open', 28 )
[493]	989
[1]	990	!
	991	!-- Define the header
	992	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	993
[493]	994	!
	995	!-- In case of parallel NetCDF output, create flag file which tells
	996	!-- combine_plot_fields that nothing is to do.
	997	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	998	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	999	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1000	CLOSE( 99 )
	1001	ENDIF
	1002
[1]	1003	ENDIF
	1004
	1005	CASE ( 104 )
	1006	!
[102]	1007	!-- Set filename
	1008	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	1009
	1010	!
[1]	1011	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1012	!-- be opened for extension, if its variables match the actual run.
[102]	1013	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1014
	1015	IF ( netcdf_extend ) THEN
	1016	!
	1017	!-- Open an existing NetCDF file for output
[102]	1018	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
[263]	1019	CALL handle_netcdf_error( 'check_open', 29 )
[1]	1020	!
	1021	!-- Read header information and set all ids. If there is a mismatch
	1022	!-- between the previuos and the actual run, netcdf_extend is returned
	1023	!-- as .FALSE.
	1024	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1025
	1026	!
	1027	!-- Remove the local file, if it can not be extended
	1028	IF ( .NOT. netcdf_extend ) THEN
	1029	nc_stat = NF90_CLOSE( id_set_pr )
[263]	1030	CALL handle_netcdf_error( 'check_open', 30 )
[102]	1031	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1032	ENDIF
	1033
	1034	ENDIF
	1035
	1036	IF ( .NOT. netcdf_extend ) THEN
	1037	!
	1038	!-- Create a new NetCDF output file
[493]	1039	IF ( netcdf_data_format > 1 ) THEN
[102]	1040	nc_stat = NF90_CREATE( filename, &
[1]	1041	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1042	id_set_pr )
	1043	ELSE
[102]	1044	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	1045	ENDIF
[263]	1046	CALL handle_netcdf_error( 'check_open', 31 )
[1]	1047	!
	1048	!-- Define the header
	1049	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1050
	1051	ENDIF
	1052
	1053	CASE ( 105 )
	1054	!
[102]	1055	!-- Set filename
	1056	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	1057
	1058	!
[1]	1059	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1060	!-- be opened for extension, if its variables match the actual run.
[102]	1061	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1062
	1063	IF ( netcdf_extend ) THEN
	1064	!
	1065	!-- Open an existing NetCDF file for output
[102]	1066	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
[263]	1067	CALL handle_netcdf_error( 'check_open', 32 )
[1]	1068	!
	1069	!-- Read header information and set all ids. If there is a mismatch
	1070	!-- between the previuos and the actual run, netcdf_extend is returned
	1071	!-- as .FALSE.
	1072	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1073
	1074	!
	1075	!-- Remove the local file, if it can not be extended
	1076	IF ( .NOT. netcdf_extend ) THEN
	1077	nc_stat = NF90_CLOSE( id_set_ts )
[263]	1078	CALL handle_netcdf_error( 'check_open', 33 )
[102]	1079	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1080	ENDIF
	1081
	1082	ENDIF
	1083
	1084	IF ( .NOT. netcdf_extend ) THEN
	1085	!
	1086	!-- Create a new NetCDF output file
[493]	1087	IF ( netcdf_data_format > 1 ) THEN
[102]	1088	nc_stat = NF90_CREATE( filename, &
[1]	1089	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1090	id_set_ts )
	1091	ELSE
[102]	1092	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	1093	ENDIF
[263]	1094	CALL handle_netcdf_error( 'check_open', 34 )
[1]	1095	!
	1096	!-- Define the header
	1097	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1098
	1099	ENDIF
	1100
	1101
	1102	CASE ( 106, 116 )
	1103	!
	1104	!-- Set filename depending on unit number
	1105	IF ( file_id == 106 ) THEN
[102]	1106	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	1107	av = 0
	1108	ELSE
[102]	1109	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	1110	av = 1
	1111	ENDIF
	1112	!
[493]	1113	!-- Inquire, if there is a NetCDF file from a previous run. This should
[1]	1114	!-- be opened for extension, if its dimensions and variables match the
	1115	!-- actual run.
	1116	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1117
	1118	IF ( netcdf_extend ) THEN
	1119	!
[493]	1120	!-- Open an existing NetCDF file for output
[765]	1121	IF ( netcdf_data_format < 3 ) THEN
	1122	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
	1123	ELSE
[493]	1124	#if defined( __netcdf4 )
[765]	1125	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
	1126	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	1127	#endif
[765]	1128	ENDIF
[263]	1129	CALL handle_netcdf_error( 'check_open', 35 )
[1]	1130	!
	1131	!-- Read header information and set all ids. If there is a mismatch
	1132	!-- between the previuos and the actual run, netcdf_extend is returned
	1133	!-- as .FALSE.
	1134	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1135
	1136	!
	1137	!-- Remove the local file, if it can not be extended
	1138	IF ( .NOT. netcdf_extend ) THEN
	1139	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1140	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1141	CALL local_system('rm ' // TRIM( filename ) )
	1142	ENDIF
	1143
	1144	ENDIF
	1145
	1146	IF ( .NOT. netcdf_extend ) THEN
	1147	!
[493]	1148	!-- Create a new NetCDF output file with requested NetCDF format
	1149	IF ( netcdf_data_format == 1 ) THEN
	1150	!
	1151	!-- Classic NetCDF format
	1152	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1153
	1154	ELSEIF ( netcdf_data_format == 2 ) THEN
	1155	!
	1156	!-- 64bit-offset format
[1]	1157	nc_stat = NF90_CREATE( filename, &
	1158	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1159	id_set_3d(av) )
[493]	1160
	1161	#if defined( __netcdf4 )
	1162	ELSEIF ( netcdf_data_format == 3 ) THEN
	1163	!
	1164	!-- NetCDF4/HDF5 format
	1165	nc_stat = NF90_CREATE( filename, &
	1166	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1167	id_set_3d(av), COMM = comm2d, &
	1168	INFO = MPI_INFO_NULL )
	1169
	1170	ELSEIF ( netcdf_data_format == 4 ) THEN
	1171	!
	1172	!-- NetCDF4/HDF5 format with classic model flag
	1173	nc_stat = NF90_CREATE( filename, &
	1174	OR( NF90_NOCLOBBER, &
	1175	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1176	id_set_3d(av), COMM = comm2d, &
	1177	INFO = MPI_INFO_NULL )
[1]	1178	#endif
	1179	ENDIF
[493]	1180
[263]	1181	CALL handle_netcdf_error( 'check_open', 37 )
[493]	1182
[1]	1183	!
	1184	!-- Define the header
	1185	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1186
[493]	1187	!
	1188	!-- In case of parallel NetCDF output, create flag file which tells
	1189	!-- combine_plot_fields that nothing is to do.
	1190	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	1191	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1192	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1193	CLOSE( 99 )
	1194	ENDIF
	1195
[1]	1196	ENDIF
	1197
	1198
	1199	CASE ( 107 )
	1200	!
[102]	1201	!-- Set filename
	1202	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1203
	1204	!
[1]	1205	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1206	!-- be opened for extension, if its variables match the actual run.
[102]	1207	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1208
	1209	IF ( netcdf_extend ) THEN
	1210	!
	1211	!-- Open an existing NetCDF file for output
[102]	1212	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
[263]	1213	CALL handle_netcdf_error( 'check_open', 38 )
	1214
[1]	1215	!
	1216	!-- Read header information and set all ids. If there is a mismatch
	1217	!-- between the previuos and the actual run, netcdf_extend is returned
	1218	!-- as .FALSE.
	1219	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1220
	1221	!
	1222	!-- Remove the local file, if it can not be extended
	1223	IF ( .NOT. netcdf_extend ) THEN
	1224	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1225	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1226	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1227	ENDIF
	1228
	1229	ENDIF
	1230
	1231	IF ( .NOT. netcdf_extend ) THEN
	1232	!
	1233	!-- Create a new NetCDF output file
[493]	1234	IF ( netcdf_data_format > 1 ) THEN
[102]	1235	nc_stat = NF90_CREATE( filename, &
[1]	1236	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1237	id_set_sp )
	1238	ELSE
[102]	1239	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1240	ENDIF
[263]	1241	CALL handle_netcdf_error( 'check_open', 40 )
[1]	1242	!
	1243	!-- Define the header
	1244	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1245
	1246	ENDIF
	1247
	1248
	1249	CASE ( 108 )
	1250
	1251	IF ( myid_char == '' ) THEN
[102]	1252	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1253	ELSE
[105]	1254	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1255	myid_char
[1]	1256	ENDIF
	1257	!
	1258	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1259	!-- be opened for extension, if its variables match the actual run.
	1260	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1261
	1262	IF ( netcdf_extend ) THEN
	1263	!
	1264	!-- Open an existing NetCDF file for output
	1265	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
[263]	1266	CALL handle_netcdf_error( 'check_open', 41 )
[1]	1267	!
	1268	!-- Read header information and set all ids. If there is a mismatch
	1269	!-- between the previuos and the actual run, netcdf_extend is returned
	1270	!-- as .FALSE.
	1271	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1272
	1273	!
	1274	!-- Remove the local file, if it can not be extended
	1275	IF ( .NOT. netcdf_extend ) THEN
	1276	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1277	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1278	CALL local_system( 'rm ' // filename )
	1279	ENDIF
	1280
	1281	ENDIF
	1282
	1283	IF ( .NOT. netcdf_extend ) THEN
	1284
	1285	!
	1286	!-- For runs on multiple processors create the subdirectory
	1287	IF ( myid_char /= '' ) THEN
	1288	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1289	THEN ! needs modification in case of non-extendable sets
[102]	1290	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1291	TRIM( coupling_char ) // '/' )
[1]	1292	ENDIF
	1293	#if defined( __parallel )
	1294	!
	1295	!-- Set a barrier in order to allow that all other processors in the
	1296	!-- directory created by PE0 can open their file
	1297	CALL MPI_BARRIER( comm2d, ierr )
	1298	#endif
	1299	ENDIF
	1300
	1301	!
[519]	1302	!-- Create a new NetCDF output file with requested NetCDF format
	1303	IF ( netcdf_data_format == 1 ) THEN
	1304	!
	1305	!-- Classic NetCDF format
	1306	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1307
	1308	ELSEIF ( netcdf_data_format == 2 ) THEN
	1309	!
	1310	!-- 64bit-offset format
[1]	1311	nc_stat = NF90_CREATE( filename, &
	1312	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1313	id_set_prt )
[519]	1314
	1315	#if defined( __netcdf4 )
	1316	ELSEIF ( netcdf_data_format == 3 ) THEN
	1317	!
	1318	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
	1319	nc_stat = NF90_CREATE( filename, &
	1320	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1321	id_set_prt )
	1322
	1323	ELSEIF ( netcdf_data_format == 4 ) THEN
	1324	!
	1325	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
	1326	!-- output into a single file!
	1327	nc_stat = NF90_CREATE( filename, &
	1328	OR( NF90_NOCLOBBER, &
	1329	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1330	id_set_prt )
	1331	#endif
[1]	1332	ENDIF
[667]	1333
[263]	1334	CALL handle_netcdf_error( 'check_open', 43 )
[1]	1335
	1336	!
	1337	!-- Define the header
	1338	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1339
	1340	ENDIF
	1341
	1342	CASE ( 109 )
	1343	!
[102]	1344	!-- Set filename
	1345	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1346
	1347	!
[1]	1348	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1349	!-- be opened for extension, if its variables match the actual run.
[102]	1350	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1351
	1352	IF ( netcdf_extend ) THEN
	1353	!
	1354	!-- Open an existing NetCDF file for output
[102]	1355	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
[263]	1356	CALL handle_netcdf_error( 'check_open', 393 )
[1]	1357	!
	1358	!-- Read header information and set all ids. If there is a mismatch
	1359	!-- between the previuos and the actual run, netcdf_extend is returned
	1360	!-- as .FALSE.
	1361	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1362
	1363	!
	1364	!-- Remove the local file, if it can not be extended
	1365	IF ( .NOT. netcdf_extend ) THEN
	1366	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1367	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1368	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1369	ENDIF
	1370
	1371	ENDIF
	1372
	1373	IF ( .NOT. netcdf_extend ) THEN
	1374	!
	1375	!-- Create a new NetCDF output file
[493]	1376	IF ( netcdf_data_format > 1 ) THEN
[102]	1377	nc_stat = NF90_CREATE( filename, &
[1]	1378	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1379	id_set_pts )
	1380	ELSE
[102]	1381	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1382	ENDIF
[263]	1383	CALL handle_netcdf_error( 'check_open', 395 )
[1]	1384	!
	1385	!-- Define the header
	1386	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1387
	1388	ENDIF
[410]	1389
[564]	1390	CASE ( 201:200+2*max_masks )
[410]	1391	!
	1392	!-- Set filename depending on unit number
[564]	1393	IF ( file_id <= 200+max_masks ) THEN
	1394	mid = file_id - 200
[410]	1395	WRITE ( mask_char,'(I2.2)') mid
	1396	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
	1397	av = 0
	1398	ELSE
[564]	1399	mid = file_id - (200+max_masks)
[410]	1400	WRITE ( mask_char,'(I2.2)') mid
	1401	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
	1402	coupling_char
	1403	av = 1
	1404	ENDIF
	1405	!
	1406	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1407	!-- be opened for extension, if its dimensions and variables match the
	1408	!-- actual run.
	1409	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1410
	1411	IF ( netcdf_extend ) THEN
	1412	!
	1413	!-- Open an existing NetCDF file for output
	1414	#if defined( __netcdf4 )
[493]	1415	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
	1416	COMM = comm2d, INFO = MPI_INFO_NULL )
[1]	1417	#else
[410]	1418	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
	1419	#endif
[564]	1420	CALL handle_netcdf_error( 'check_open', 456 )
[410]	1421	!
	1422	!-- Read header information and set all ids. If there is a mismatch
	1423	!-- between the previuos and the actual run, netcdf_extend is returned
	1424	!-- as .FALSE.
	1425	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
[1]	1426
[410]	1427	!
	1428	!-- Remove the local file, if it can not be extended
	1429	IF ( .NOT. netcdf_extend ) THEN
	1430	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[564]	1431	CALL handle_netcdf_error( 'check_open', 457 )
[410]	1432	CALL local_system('rm ' // TRIM( filename ) )
	1433	ENDIF
[1]	1434
[410]	1435	ENDIF
	1436
	1437	IF ( .NOT. netcdf_extend ) THEN
[1]	1438	!
[493]	1439	!-- Create a new NetCDF output file with requested NetCDF format
	1440	IF ( netcdf_data_format == 1 ) THEN
	1441	!
	1442	!-- Classic NetCDF format
	1443	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
	1444	id_set_mask(mid,av) )
[410]	1445
[493]	1446	ELSEIF ( netcdf_data_format == 2 ) THEN
	1447	!
	1448	!-- 64bit-offset format
	1449	nc_stat = NF90_CREATE( filename, &
	1450	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1451	id_set_mask(mid,av) )
[410]	1452
	1453
	1454	#if defined( __netcdf4 )
[493]	1455	ELSEIF ( netcdf_data_format == 3 ) THEN
	1456	!
	1457	!-- NetCDF4/HDF5 format
	1458	nc_stat = NF90_CREATE( filename, &
	1459	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1460	id_set_mask(mid,av), COMM = comm2d, &
	1461	INFO = MPI_INFO_NULL )
[410]	1462
[493]	1463	ELSEIF ( netcdf_data_format == 4 ) THEN
	1464	!
	1465	!-- NetCDF4/HDF5 format with classic model flag
	1466	nc_stat = NF90_CREATE( filename, &
	1467	OR( NF90_NOCLOBBER, &
	1468	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1469	id_set_mask(mid,av), COMM = comm2d, &
	1470	INFO = MPI_INFO_NULL )
[410]	1471	#endif
[493]	1472	ENDIF
[410]	1473
[564]	1474	CALL handle_netcdf_error( 'check_open', 458 )
[410]	1475	!
	1476	!-- Define the header
	1477	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
	1478
	1479	ENDIF
	1480
	1481
	1482	#else
	1483
[564]	1484	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1485
	1486	!
[1]	1487	!-- Nothing is done in case of missing netcdf support
	1488	RETURN
	1489
	1490	#endif
	1491
	1492	CASE DEFAULT
	1493
[247]	1494	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1495	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1496
	1497	END SELECT
	1498
	1499	!
	1500	!-- Set open flag
	1501	openfile(file_id)%opened = .TRUE.
	1502
	1503	!
	1504	!-- Formats
	1505	3300 FORMAT ('#'/ &
	1506	'coord 1 file=',A,' filetype=unformatted'/ &
	1507	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1508	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1509	'#')
	1510	4000 FORMAT ('# ',A)
	1511	5000 FORMAT ('# ',A/ &
	1512	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1513	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1514	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1515	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1516	8000 FORMAT (A/ &
	1517	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1518	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1519	103('-'))
	1520
	1521	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |