Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 699

Last change on this file since 699 was 668, checked in by suehring, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 55.7 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
	3	!------------------------------------------------------------------------------!
[247]	4	! Current revisions:
[1]	5	! -----------------
	6	!
	7	! Former revisions:
	8	! -----------------
[3]	9	! $Id: check_open.f90 668 2010-12-23 13:22:58Z suehring $
[77]	10	!
[668]	11	! 667 2010-12-23 12:06:00Z suehring/gryschka
	12	! Output of total array size was adapted to nbgp.
	13	!
[601]	14	! 600 2010-11-24 16:10:51Z raasch
	15	! bugfix in opening of cross section netcdf-files (parallel opening with
	16	! netcdf4 only works for netcdf_data_format > 2)
	17	!
[565]	18	! 564 2010-09-30 13:18:59Z helmke
	19	! start number of mask output files changed to 201, netcdf message identifiers
	20	! of masked output changed
	21	!
[520]	22	! 519 2010-03-19 05:30:02Z raasch
	23	! NetCDF4 support for particle data
	24	!
[494]	25	! 493 2010-03-01 08:30:24Z raasch
	26	! NetCDF4 support (parallel output)
	27	!
[449]	28	! 410 2009-12-04 17:05:40Z letzel
	29	! masked data output
	30	!
[392]	31	! 277 2009-03-31 09:13:47Z heinze
	32	! Output of NetCDF messages with aid of message handling routine.
	33	! Output of messages replaced by message handling routine
	34	!
[198]	35	! 146 2008-01-17 13:08:34Z raasch
	36	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	37	! because only this file contains the global variables,
	38	! myid_char_14 removed
	39	!
[139]	40	! 120 2007-10-17 11:54:43Z raasch
	41	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
	42	!
[110]	43	! 105 2007-08-08 07:12:55Z raasch
	44	! Different filenames are used in case of a coupled simulation,
	45	! coupling_char added to all relevant filenames
	46	!
[83]	47	! 82 2007-04-16 15:40:52Z raasch
	48	! Call of local_getenv removed, preprocessor directives for old systems removed
	49	!
[77]	50	! 46 2007-03-05 06:00:47Z raasch
	51	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	52	!
[3]	53	! RCS Log replace by Id keyword, revision history cleaned up
	54	!
[1]	55	! Revision 1.44 2006/08/22 13:48:34 raasch
	56	! xz and yz cross sections now up to nzt+1
	57	!
	58	! Revision 1.1 1997/08/11 06:10:55 raasch
	59	! Initial revision
	60	!
	61	!
	62	! Description:
	63	! ------------
	64	! Check if file unit is open. If not, open file and, if necessary, write a
	65	! header or start other initializing actions, respectively.
	66	!------------------------------------------------------------------------------!
	67
	68	USE array_kind
	69	USE arrays_3d
	70	USE control_parameters
	71	USE grid_variables
	72	USE indices
	73	USE netcdf_control
	74	USE particle_attributes
	75	USE pegrid
	76	USE profil_parameter
	77	USE statistics
	78
	79	IMPLICIT NONE
	80
[410]	81	CHARACTER (LEN=2) :: mask_char, suffix
[82]	82	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	83	CHARACTER (LEN=30) :: filename
	84	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	85	avs_data_file_localname
	86	CHARACTER (LEN=80) :: rtext
	87	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	88	batch_scp, zeile
	89	CHARACTER (LEN=400) :: command
	90
	91	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
	92	j, k, legpos = 1, timodex = 1
	93	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
	94
	95	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	96	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	97	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	98
	99	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	100	sizex = 250.0, sizey = 40.0, texfac = 1.5
	101
	102	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	103	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	104
	105
	106	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
	107	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
	108	rand, rlegfak, sizex, sizey, texfac, &
	109	timodex, twoxa, twoya, xtext
	110
	111
	112	!
	113	!-- Immediate return if file already open
	114	IF ( openfile(file_id)%opened ) RETURN
	115
	116	!
	117	!-- Only certain files are allowed to be re-opened
	118	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	119	!-- has not been checked so far, if it works!
	120	IF ( openfile(file_id)%opened_before ) THEN
	121	SELECT CASE ( file_id )
[143]	122	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	123	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	124	message_string = 're-open of unit ' // &
[274]	125	'14 is not verified. Please check results!'
[247]	126	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	127	ENDIF
[143]	128
[1]	129	CASE DEFAULT
[247]	130	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	131	' is not allowed'
[247]	132	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	133
[1]	134	RETURN
[143]	135
[1]	136	END SELECT
	137	ENDIF
	138
	139	!
	140	!-- Check if file may be opened on the relevant PE
	141	SELECT CASE ( file_id )
	142
[493]	143	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
[410]	144
[493]	145	IF ( myid /= 0 ) THEN
	146	WRITE( message_string, * ) 'opening file-id ',file_id, &
	147	' not allowed for PE ',myid
	148	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	149	ENDIF
	150
[564]	151	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	152
	153	IF ( netcdf_data_format < 3 ) THEN
[247]	154
[410]	155	IF ( myid /= 0 ) THEN
	156	WRITE( message_string, * ) 'opening file-id ',file_id, &
	157	' not allowed for PE ',myid
	158	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	159	ENDIF
	160
[493]	161	ENDIF
[1]	162
	163	CASE ( 21, 22, 23 )
	164
	165	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	166	IF ( myid /= 0 ) THEN
[247]	167	WRITE( message_string, * ) 'opening file-id ',file_id, &
	168	' not allowed for PE ',myid
[277]	169	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	170	END IF
[1]	171	ENDIF
	172
	173	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	174
	175	!
	176	!-- File-ids that are used temporarily in other routines
[247]	177	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	178	' is not allowed since it is used otherwise'
[247]	179	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	180
[1]	181	END SELECT
	182
	183	!
	184	!-- Open relevant files
	185	SELECT CASE ( file_id )
	186
	187	CASE ( 11 )
	188
[102]	189	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	190	STATUS='OLD' )
[1]	191
	192	CASE ( 13 )
	193
	194	IF ( myid_char == '' ) THEN
[102]	195	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	196	FORM='UNFORMATTED', STATUS='OLD' )
[1]	197	ELSE
[143]	198	!
	199	!-- First opening of unit 13 openes file _0000 on all PEs because only
	200	!-- this file contains the global variables
	201	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	202	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	203	FORM='UNFORMATTED', STATUS='OLD' )
	204	ELSE
	205	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	206	FORM='UNFORMATTED', STATUS='OLD' )
	207	ENDIF
[1]	208	ENDIF
	209
	210	CASE ( 14 )
	211
	212	IF ( myid_char == '' ) THEN
[102]	213	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	214	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	215	ELSE
	216	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	217	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	218	ENDIF
	219	#if defined( __parallel )
	220	!
	221	!-- Set a barrier in order to allow that all other processors in the
	222	!-- directory created by PE0 can open their file
	223	CALL MPI_BARRIER( comm2d, ierr )
	224	#endif
[146]	225	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[102]	226	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	227	ENDIF
	228
	229	CASE ( 15 )
	230
[102]	231	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	232
	233	CASE ( 16 )
	234
[102]	235	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	236
	237	CASE ( 17 )
	238
[102]	239	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	240
	241	CASE ( 18 )
	242
[102]	243	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	244
	245	CASE ( 19 )
	246
[102]	247	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	248
	249	CASE ( 20 )
	250
	251	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	252	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	253	ENDIF
	254	IF ( myid_char == '' ) THEN
[105]	255	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	256	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	257	ELSE
	258	#if defined( __parallel )
	259	!
	260	!-- Set a barrier in order to allow that all other processors in the
	261	!-- directory created by PE0 can open their file
	262	CALL MPI_BARRIER( comm2d, ierr )
	263	#endif
[105]	264	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	265	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	266	ENDIF
	267
	268	CASE ( 21 )
	269
	270	IF ( data_output_2d_on_each_pe ) THEN
[105]	271	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	272	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	273	ELSE
[102]	274	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	275	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	276	ENDIF
	277
	278	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	279	!
	280	!-- Output for combine_plot_fields
	281	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	282	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	283	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	284	ENDIF
	285	!
	286	!-- Determine and write ISO2D coordiante header
	287	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	288	hu = 0.0
	289	ho = (ny+1) * dy
	290	DO i = 1, ny
	291	eta(i) = REAL( i ) / ( ny + 1.0 )
	292	ENDDO
	293	eta(0) = 0.0
	294	eta(ny+1) = 1.0
	295
	296	WRITE (21) dx,eta,hu,ho
	297	DEALLOCATE( eta, ho, hu )
	298
	299	!
	300	!-- Create output file for local parameters
	301	IF ( iso2d_output ) THEN
[102]	302	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	303	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	304	openfile(27)%opened = .TRUE.
	305	ENDIF
	306
	307	ENDIF
	308
	309	CASE ( 22 )
	310
	311	IF ( data_output_2d_on_each_pe ) THEN
[105]	312	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	313	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	314	ELSE
[102]	315	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	316	POSITION='APPEND' )
	317	ENDIF
	318
	319	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	320	!
	321	!-- Output for combine_plot_fields
	322	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	323	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	324	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	325	ENDIF
	326	!
	327	!-- Determine and write ISO2D coordiante header
	328	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	329	hu = 0.0
	330	ho = zu(nz+1)
	331	DO i = 1, nz
	332	eta(i) = REAL( zu(i) ) / zu(nz+1)
	333	ENDDO
	334	eta(0) = 0.0
	335	eta(nz+1) = 1.0
	336
	337	WRITE (22) dx,eta,hu,ho
	338	DEALLOCATE( eta, ho, hu )
	339	!
	340	!-- Create output file for local parameters
[102]	341	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	342	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	343	openfile(28)%opened = .TRUE.
	344
	345	ENDIF
	346
	347	CASE ( 23 )
	348
	349	IF ( data_output_2d_on_each_pe ) THEN
[105]	350	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	351	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	352	ELSE
[102]	353	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	354	POSITION='APPEND' )
	355	ENDIF
	356
	357	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	358	!
	359	!-- Output for combine_plot_fields
	360	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	361	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	362	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	363	ENDIF
	364	!
	365	!-- Determine and write ISO2D coordiante header
	366	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	367	hu = 0.0
	368	ho = zu(nz+1)
	369	DO i = 1, nz
	370	eta(i) = REAL( zu(i) ) / zu(nz+1)
	371	ENDDO
	372	eta(0) = 0.0
	373	eta(nz+1) = 1.0
	374
	375	WRITE (23) dx,eta,hu,ho
	376	DEALLOCATE( eta, ho, hu )
	377	!
	378	!-- Create output file for local parameters
[102]	379	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	380	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	381	openfile(29)%opened = .TRUE.
	382
	383	ENDIF
	384
	385	CASE ( 30 )
	386
[105]	387	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	388	FORM='UNFORMATTED' )
[1]	389	!
	390	!-- Write coordinate file for AVS
	391	IF ( myid == 0 ) THEN
	392	#if defined( __parallel )
	393	!
	394	!-- Specifications for combine_plot_fields
	395	IF ( .NOT. do3d_compress ) THEN
[667]	396	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
[1]	397	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	398	ENDIF
	399	#endif
	400	!
	401	!-- Write coordinate file for AVS:
	402	!-- First determine file names (including cyle numbers) of AVS files on
	403	!-- target machine (to which the files are to be transferred).
	404	!-- Therefore path information has to be obtained first.
	405	IF ( avs_output ) THEN
[82]	406	iaddres = LEN_TRIM( return_addres )
	407	iusern = LEN_TRIM( return_username )
[1]	408
	409	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	410	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	411	.NOT. avs_data_file_found )
	412
	413	READ ( 3, '(A)', END=1 ) zeile
	414
	415	SELECT CASE ( zeile(1:11) )
	416
	417	CASE ( 'PLOT3D_COOR' )
	418	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	419	avs_coor_file_localname
	420	avs_coor_file_found = .TRUE.
	421
	422	CASE ( 'PLOT3D_DATA' )
	423	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	424	avs_data_file_localname
	425	avs_data_file_found = .TRUE.
	426
	427	CASE DEFAULT
	428	READ ( 3, '(A/A)' ) zeile, zeile
	429
	430	END SELECT
	431
	432	ENDDO
	433	!
	434	!-- Now the cycle numbers on the remote machine must be obtained
	435	!-- using batch_scp
	436	1 CLOSE ( 3 )
	437	IF ( .NOT. avs_coor_file_found .OR. &
	438	.NOT. avs_data_file_found ) THEN
[274]	439	message_string= 'no filename for AVS-data-file ' // &
	440	'found in MRUN-config-file' // &
[247]	441	' &filename in FLD-file set to "unknown"'
	442	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	443
	444	avs_coor_file = 'unknown'
	445	avs_data_file = 'unknown'
	446	ELSE
	447	get_filenames = .TRUE.
	448	IF ( TRIM( host ) == 'hpmuk' .OR. &
	449	TRIM( host ) == 'lcmuk' ) THEN
	450	batch_scp = '/home/raasch/pub/batch_scp'
	451	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	452	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	453	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	454	TRIM( host ) == 'ibmb' ) THEN
	455	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	456	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	457	batch_scp = '/home/nhbksira/pub/batch_scp'
	458	ELSE
[247]	459	message_string= 'no path for batch_scp on host "' // &
	460	TRIM( host ) // '"'
	461	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	462	get_filenames = .FALSE.
	463	ENDIF
	464
	465	IF ( get_filenames ) THEN
	466	!
	467	!-- Determine the coordinate file name.
	468	!-- /etc/passwd serves as Dummy-Datei, because it is not
	469	!-- really transferred.
	470	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	471	return_username(1:iusern) // ' ' // &
[1]	472	return_addres(1:iaddres) // ' /etc/passwd "' // &
	473	TRIM( avs_coor_file_catalog ) // '" ' // &
	474	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	475
	476	CALL local_system( command )
	477	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	478	READ ( 3, '(A)' ) avs_coor_file
	479	CLOSE ( 3 )
	480	!
	481	!-- Determine the data file name
	482	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	483	return_username(1:iusern) // ' ' // &
[1]	484	return_addres(1:iaddres) // ' /etc/passwd "' // &
	485	TRIM( avs_data_file_catalog ) // '" ' // &
	486	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	487
	488	CALL local_system( command )
	489	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	490	READ ( 3, '(A)' ) avs_data_file
	491	CLOSE ( 3 )
	492
	493	ELSE
	494
	495	avs_coor_file = 'unknown'
	496	avs_data_file = 'unknown'
	497
	498	ENDIF
	499
	500	ENDIF
	501
	502	!
	503	!-- Output of the coordinate file description for FLD-file
	504	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	505	openfile(33)%opened = .TRUE.
	506	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
[667]	507	TRIM( avs_coor_file ), (nx+2nbgp)4, &
	508	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
[1]	509
	510
	511	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	512	DO i = 0, nx+1
	513	xkoor(i) = i * dx
	514	ENDDO
	515	DO j = 0, ny+1
	516	ykoor(j) = j * dy
	517	ENDDO
	518	DO k = 0, nz_do3d
	519	zkoor(k) = zu(k)
	520	ENDDO
	521
	522	!
	523	!-- Create and write on AVS coordinate file
	524	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	525	openfile(31)%opened = .TRUE.
	526
	527	WRITE (31) xkoor, ykoor, zkoor
	528	DEALLOCATE( xkoor, ykoor, zkoor )
	529
	530	!
	531	!-- Create FLD file (being written on in close_file)
	532	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	533	openfile(32)%opened = .TRUE.
	534
	535	!
	536	!-- Create flag file for compressed 3D output,
	537	!-- influences output commands in mrun
	538	IF ( do3d_compress ) THEN
	539	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	540	WRITE ( 3, '(1X)' )
	541	CLOSE ( 3 )
	542	ENDIF
	543
	544	ENDIF
	545
	546	ENDIF
	547
	548	!
	549	!-- In case of data compression output of the coordinates of the
	550	!-- corresponding partial array of a PE only once at the top of the file
	551	IF ( avs_output .AND. do3d_compress ) THEN
[667]	552	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
[1]	553	ENDIF
	554
	555	CASE ( 40:49 )
	556
	557	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
	558	suffix = ''
	559	ELSE
	560	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
	561	ENDIF
[105]	562	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
	563	TRIM( suffix ), &
[102]	564	FORM='FORMATTED' )
[1]	565	!
	566	!-- Write contents comments at the top of the file
	567	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
	568	TRIM( region( file_id - 40 ) )
	569
	570	CASE ( 50:59 )
	571
	572	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	573	suffix = ''
	574	ELSE
	575	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	576	ENDIF
[105]	577	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	578	TRIM( suffix ), &
[102]	579	FORM='FORMATTED', RECL=496 )
[1]	580	!
	581	!-- Write PROFIL parameter file for output of time series
	582	!-- NOTE: To be on the safe side, this output is done at the beginning of
	583	!-- the model run (in case of collapse) and it is repeated in
	584	!-- close_file, then, however, with value ranges for the coordinate
	585	!-- systems
	586	!
	587	!-- Firstly determine the number of the coordinate systems to be drawn
	588	cranz = 0
	589	DO j = 1, 10
	590	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	591	ENDDO
	592	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	593	TRIM( region( file_id - 50 ) )
	594	!
	595	!-- Write RAHMEN parameter
[105]	596	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	597	TRIM( suffix ), &
[102]	598	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	599	WRITE ( 90, RAHMEN )
	600	!
	601	!-- Determine and write CROSS parameters for the individual coordinate
	602	!-- systems
	603	DO j = 1, 10
	604	k = cross_ts_number_count(j)
	605	IF ( k /= 0 ) THEN
	606	!
	607	!-- Store curve numbers, colours and line style
	608	klist(1:k) = cross_ts_numbers(1:k,j)
	609	klist(k+1:10) = 999999
	610	cucol(1:k) = linecolors(1:k)
	611	lstyle(1:k) = linestyles(1:k)
	612	!
	613	!-- Write CROSS parameter
	614	WRITE ( 90, CROSS )
	615
	616	ENDIF
	617	ENDDO
	618
	619	CLOSE ( 90 )
	620	!
	621	!-- Write all labels at the top of the data file, but only during the
	622	!-- first run of a sequence of jobs. The following jobs copy the time
	623	!-- series data to the bottom of that file.
	624	IF ( runnr == 0 ) THEN
	625	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	626	' ' // TRIM( region( file_id - 50 ) )
	627	ENDIF
	628
	629
	630	CASE ( 80 )
	631
	632	IF ( myid_char == '' ) THEN
[105]	633	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	634	FORM='FORMATTED', POSITION='APPEND' )
[1]	635	ELSE
	636	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	637	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	638	ENDIF
	639	#if defined( __parallel )
	640	!
	641	!-- Set a barrier in order to allow that thereafter all other
	642	!-- processors in the directory created by PE0 can open their file.
	643	!-- WARNING: The following barrier will lead to hanging jobs, if
	644	!-- check_open is first called from routine
	645	!-- allocate_prt_memory!
	646	IF ( .NOT. openfile(80)%opened_before ) THEN
	647	CALL MPI_BARRIER( comm2d, ierr )
	648	ENDIF
	649	#endif
[105]	650	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	651	myid_char, &
[102]	652	FORM='FORMATTED', POSITION='APPEND' )
[1]	653	ENDIF
	654
	655	IF ( .NOT. openfile(80)%opened_before ) THEN
	656	WRITE ( 80, 8000 ) TRIM( run_description_header )
	657	ENDIF
	658
	659	CASE ( 81 )
	660
[102]	661	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	662	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	663
	664	CASE ( 82 )
	665
[102]	666	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	667	POSITION = 'APPEND' )
	668
	669	CASE ( 83 )
	670
[102]	671	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	672	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	673
	674	CASE ( 84 )
	675
[102]	676	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	677	POSITION='APPEND' )
	678
	679	CASE ( 85 )
	680
	681	IF ( myid_char == '' ) THEN
[105]	682	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	683	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	684	ELSE
	685	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	686	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	687	ENDIF
	688	#if defined( __parallel )
	689	!
	690	!-- Set a barrier in order to allow that thereafter all other
	691	!-- processors in the directory created by PE0 can open their file
	692	CALL MPI_BARRIER( comm2d, ierr )
	693	#endif
[105]	694	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	695	myid_char, &
[102]	696	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	697	ENDIF
	698
	699	IF ( .NOT. openfile(85)%opened_before ) THEN
	700	WRITE ( 85 ) run_description_header
	701	!
	702	!-- Attention: change version number whenever the output format on
	703	!-- unit 85 is changed (see also in routine advec_particles)
	704	rtext = 'data format version 3.0'
	705	WRITE ( 85 ) rtext
	706	WRITE ( 85 ) number_of_particle_groups, &
	707	max_number_of_particle_groups
	708	WRITE ( 85 ) particle_groups
	709	ENDIF
	710
	711	#if defined( __netcdf )
	712	CASE ( 101, 111 )
	713	!
	714	!-- Set filename depending on unit number
	715	IF ( file_id == 101 ) THEN
[102]	716	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	717	av = 0
	718	ELSE
[102]	719	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	720	av = 1
	721	ENDIF
	722	!
	723	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	724	!-- be opened for extension, if its dimensions and variables match the
	725	!-- actual run.
	726	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	727
	728	IF ( netcdf_extend ) THEN
	729	!
[493]	730	!-- Open an existing NetCDF file for output
[600]	731	IF ( netcdf_data_format < 3 ) THEN
	732	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
	733	ELSE
[493]	734	#if defined( __netcdf4 )
[600]	735	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
	736	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	737	#endif
[600]	738	ENDIF
[263]	739
	740	CALL handle_netcdf_error( 'check_open', 20 )
[1]	741	!
	742	!-- Read header information and set all ids. If there is a mismatch
	743	!-- between the previuos and the actual run, netcdf_extend is returned
	744	!-- as .FALSE.
	745	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	746
	747	!
	748	!-- Remove the local file, if it can not be extended
	749	IF ( .NOT. netcdf_extend ) THEN
	750	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	751	CALL handle_netcdf_error( 'check_open', 21 )
[493]	752	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	753	ENDIF
	754
	755	ENDIF
	756
	757	IF ( .NOT. netcdf_extend ) THEN
	758	!
[493]	759	!-- Create a new NetCDF output file with requested NetCDF format
	760	IF ( netcdf_data_format == 1 ) THEN
	761	!
	762	!-- Classic NetCDF format
	763	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	764
	765	ELSEIF ( netcdf_data_format == 2 ) THEN
	766	!
	767	!-- 64bit-offset format
[1]	768	nc_stat = NF90_CREATE( filename, &
	769	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	770	id_set_xy(av) )
[247]	771
[493]	772	#if defined( __netcdf4 )
	773	ELSEIF ( netcdf_data_format == 3 ) THEN
	774	!
	775	!-- NetCDF4/HDF5 format
	776	nc_stat = NF90_CREATE( filename, &
	777	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	778	id_set_xy(av), COMM = comm2d, &
	779	INFO = MPI_INFO_NULL )
	780
	781	ELSEIF ( netcdf_data_format == 4 ) THEN
	782	!
	783	!-- NetCDF4/HDF5 format with classic model flag
	784	nc_stat = NF90_CREATE( filename, &
	785	OR( NF90_NOCLOBBER, &
	786	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	787	id_set_xy(av), COMM = comm2d, &
	788	INFO = MPI_INFO_NULL )
[1]	789	#endif
	790	ENDIF
[493]	791
[263]	792	CALL handle_netcdf_error( 'check_open', 22 )
[493]	793
[1]	794	!
	795	!-- Define the header
	796	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	797
[493]	798	!
	799	!-- In case of parallel NetCDF output, create flag file which tells
	800	!-- combine_plot_fields that nothing is to do.
	801	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	802	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	803	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	804	CLOSE( 99 )
	805	ENDIF
	806
[1]	807	ENDIF
	808
	809	CASE ( 102, 112 )
	810	!
	811	!-- Set filename depending on unit number
	812	IF ( file_id == 102 ) THEN
[102]	813	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	814	av = 0
	815	ELSE
[102]	816	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	817	av = 1
	818	ENDIF
	819	!
	820	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	821	!-- be opened for extension, if its dimensions and variables match the
	822	!-- actual run.
	823	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	824
	825	IF ( netcdf_extend ) THEN
	826	!
[600]	827	!-- Open an existing NetCDF file for output
	828	IF ( netcdf_data_format < 3 ) THEN
	829	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
	830	ELSE
[493]	831	#if defined( __netcdf4 )
[600]	832	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
	833	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	834	#endif
[600]	835	ENDIF
	836
[263]	837	CALL handle_netcdf_error( 'check_open', 23 )
[1]	838	!
	839	!-- Read header information and set all ids. If there is a mismatch
	840	!-- between the previuos and the actual run, netcdf_extend is returned
	841	!-- as .FALSE.
	842	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	843
	844	!
	845	!-- Remove the local file, if it can not be extended
	846	IF ( .NOT. netcdf_extend ) THEN
	847	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	848	CALL handle_netcdf_error( 'check_open', 24 )
[493]	849	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	850	ENDIF
	851
	852	ENDIF
	853
	854	IF ( .NOT. netcdf_extend ) THEN
	855	!
[493]	856	!-- Create a new NetCDF output file with requested NetCDF format
	857	IF ( netcdf_data_format == 1 ) THEN
	858	!
	859	!-- Classic NetCDF format
	860	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	861
	862	ELSEIF ( netcdf_data_format == 2 ) THEN
	863	!
	864	!-- 64bit-offset format
[1]	865	nc_stat = NF90_CREATE( filename, &
	866	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	867	id_set_xz(av) )
[493]	868
	869	#if defined( __netcdf4 )
	870	ELSEIF ( netcdf_data_format == 3 ) THEN
	871	!
	872	!-- NetCDF4/HDF5 format
	873	nc_stat = NF90_CREATE( filename, &
	874	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	875	id_set_xz(av), COMM = comm2d, &
	876	INFO = MPI_INFO_NULL )
	877
	878	ELSEIF ( netcdf_data_format == 4 ) THEN
	879	!
	880	!-- NetCDF4/HDF5 format with classic model flag
	881	nc_stat = NF90_CREATE( filename, &
	882	OR( NF90_NOCLOBBER, &
	883	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	884	id_set_xz(av), COMM = comm2d, &
	885	INFO = MPI_INFO_NULL )
[1]	886	#endif
	887	ENDIF
[493]	888
[263]	889	CALL handle_netcdf_error( 'check_open', 25 )
[493]	890
[1]	891	!
	892	!-- Define the header
	893	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	894
[493]	895	!
	896	!-- In case of parallel NetCDF output, create flag file which tells
	897	!-- combine_plot_fields that nothing is to do.
	898	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	899	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	900	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	901	CLOSE( 99 )
	902	ENDIF
	903
[1]	904	ENDIF
	905
	906	CASE ( 103, 113 )
	907	!
	908	!-- Set filename depending on unit number
	909	IF ( file_id == 103 ) THEN
[102]	910	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	911	av = 0
	912	ELSE
[102]	913	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	914	av = 1
	915	ENDIF
	916	!
	917	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	918	!-- be opened for extension, if its dimensions and variables match the
	919	!-- actual run.
	920	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	921
	922	IF ( netcdf_extend ) THEN
	923	!
[600]	924	!-- Open an existing NetCDF file for output
	925	IF ( netcdf_data_format < 3 ) THEN
	926	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
	927	ELSE
[493]	928	#if defined( __netcdf4 )
[600]	929	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
	930	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	931	#endif
[600]	932	ENDIF
[667]	933
[263]	934	CALL handle_netcdf_error( 'check_open', 26 )
[1]	935	!
	936	!-- Read header information and set all ids. If there is a mismatch
	937	!-- between the previuos and the actual run, netcdf_extend is returned
	938	!-- as .FALSE.
	939	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	940
	941	!
	942	!-- Remove the local file, if it can not be extended
	943	IF ( .NOT. netcdf_extend ) THEN
	944	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	945	CALL handle_netcdf_error( 'check_open', 27 )
[493]	946	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	947	ENDIF
	948
	949	ENDIF
	950
	951	IF ( .NOT. netcdf_extend ) THEN
	952	!
[493]	953	!-- Create a new NetCDF output file with requested NetCDF format
	954	IF ( netcdf_data_format == 1 ) THEN
	955	!
	956	!-- Classic NetCDF format
	957	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	958
	959	ELSEIF ( netcdf_data_format == 2 ) THEN
	960	!
	961	!-- 64bit-offset format
[1]	962	nc_stat = NF90_CREATE( filename, &
[493]	963	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
[1]	964	id_set_yz(av) )
[493]	965
	966	#if defined( __netcdf4 )
	967	ELSEIF ( netcdf_data_format == 3 ) THEN
	968	!
	969	!-- NetCDF4/HDF5 format
	970	nc_stat = NF90_CREATE( filename, &
	971	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	972	id_set_yz(av), COMM = comm2d, &
	973	INFO = MPI_INFO_NULL )
	974
	975	ELSEIF ( netcdf_data_format == 4 ) THEN
	976	!
	977	!-- NetCDF4/HDF5 format with classic model flag
	978	nc_stat = NF90_CREATE( filename, &
	979	OR( NF90_NOCLOBBER, &
	980	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	981	id_set_yz(av), COMM = comm2d, &
	982	INFO = MPI_INFO_NULL )
[1]	983	#endif
	984	ENDIF
[493]	985
[263]	986	CALL handle_netcdf_error( 'check_open', 28 )
[493]	987
[1]	988	!
	989	!-- Define the header
	990	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	991
[493]	992	!
	993	!-- In case of parallel NetCDF output, create flag file which tells
	994	!-- combine_plot_fields that nothing is to do.
	995	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	996	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	997	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	998	CLOSE( 99 )
	999	ENDIF
	1000
[1]	1001	ENDIF
	1002
	1003	CASE ( 104 )
	1004	!
[102]	1005	!-- Set filename
	1006	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	1007
	1008	!
[1]	1009	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1010	!-- be opened for extension, if its variables match the actual run.
[102]	1011	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1012
	1013	IF ( netcdf_extend ) THEN
	1014	!
	1015	!-- Open an existing NetCDF file for output
[102]	1016	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
[263]	1017	CALL handle_netcdf_error( 'check_open', 29 )
[1]	1018	!
	1019	!-- Read header information and set all ids. If there is a mismatch
	1020	!-- between the previuos and the actual run, netcdf_extend is returned
	1021	!-- as .FALSE.
	1022	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1023
	1024	!
	1025	!-- Remove the local file, if it can not be extended
	1026	IF ( .NOT. netcdf_extend ) THEN
	1027	nc_stat = NF90_CLOSE( id_set_pr )
[263]	1028	CALL handle_netcdf_error( 'check_open', 30 )
[102]	1029	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1030	ENDIF
	1031
	1032	ENDIF
	1033
	1034	IF ( .NOT. netcdf_extend ) THEN
	1035	!
	1036	!-- Create a new NetCDF output file
[493]	1037	IF ( netcdf_data_format > 1 ) THEN
[102]	1038	nc_stat = NF90_CREATE( filename, &
[1]	1039	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1040	id_set_pr )
	1041	ELSE
[102]	1042	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	1043	ENDIF
[263]	1044	CALL handle_netcdf_error( 'check_open', 31 )
[1]	1045	!
	1046	!-- Define the header
	1047	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1048
	1049	ENDIF
	1050
	1051	CASE ( 105 )
	1052	!
[102]	1053	!-- Set filename
	1054	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	1055
	1056	!
[1]	1057	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1058	!-- be opened for extension, if its variables match the actual run.
[102]	1059	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1060
	1061	IF ( netcdf_extend ) THEN
	1062	!
	1063	!-- Open an existing NetCDF file for output
[102]	1064	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
[263]	1065	CALL handle_netcdf_error( 'check_open', 32 )
[1]	1066	!
	1067	!-- Read header information and set all ids. If there is a mismatch
	1068	!-- between the previuos and the actual run, netcdf_extend is returned
	1069	!-- as .FALSE.
	1070	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1071
	1072	!
	1073	!-- Remove the local file, if it can not be extended
	1074	IF ( .NOT. netcdf_extend ) THEN
	1075	nc_stat = NF90_CLOSE( id_set_ts )
[263]	1076	CALL handle_netcdf_error( 'check_open', 33 )
[102]	1077	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1078	ENDIF
	1079
	1080	ENDIF
	1081
	1082	IF ( .NOT. netcdf_extend ) THEN
	1083	!
	1084	!-- Create a new NetCDF output file
[493]	1085	IF ( netcdf_data_format > 1 ) THEN
[102]	1086	nc_stat = NF90_CREATE( filename, &
[1]	1087	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1088	id_set_ts )
	1089	ELSE
[102]	1090	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	1091	ENDIF
[263]	1092	CALL handle_netcdf_error( 'check_open', 34 )
[1]	1093	!
	1094	!-- Define the header
	1095	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1096
	1097	ENDIF
	1098
	1099
	1100	CASE ( 106, 116 )
	1101	!
	1102	!-- Set filename depending on unit number
	1103	IF ( file_id == 106 ) THEN
[102]	1104	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	1105	av = 0
	1106	ELSE
[102]	1107	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	1108	av = 1
	1109	ENDIF
	1110	!
[493]	1111	!-- Inquire, if there is a NetCDF file from a previous run. This should
[1]	1112	!-- be opened for extension, if its dimensions and variables match the
	1113	!-- actual run.
	1114	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1115
	1116	IF ( netcdf_extend ) THEN
	1117	!
[493]	1118	!-- Open an existing NetCDF file for output
	1119	#if defined( __netcdf4 )
	1120	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
	1121	COMM = comm2d, INFO = MPI_INFO_NULL )
	1122	#else
[1]	1123	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
[493]	1124	#endif
[263]	1125	CALL handle_netcdf_error( 'check_open', 35 )
[1]	1126	!
	1127	!-- Read header information and set all ids. If there is a mismatch
	1128	!-- between the previuos and the actual run, netcdf_extend is returned
	1129	!-- as .FALSE.
	1130	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1131
	1132	!
	1133	!-- Remove the local file, if it can not be extended
	1134	IF ( .NOT. netcdf_extend ) THEN
	1135	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1136	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1137	CALL local_system('rm ' // TRIM( filename ) )
	1138	ENDIF
	1139
	1140	ENDIF
	1141
	1142	IF ( .NOT. netcdf_extend ) THEN
	1143	!
[493]	1144	!-- Create a new NetCDF output file with requested NetCDF format
	1145	IF ( netcdf_data_format == 1 ) THEN
	1146	!
	1147	!-- Classic NetCDF format
	1148	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1149
	1150	ELSEIF ( netcdf_data_format == 2 ) THEN
	1151	!
	1152	!-- 64bit-offset format
[1]	1153	nc_stat = NF90_CREATE( filename, &
	1154	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1155	id_set_3d(av) )
[493]	1156
	1157	#if defined( __netcdf4 )
	1158	ELSEIF ( netcdf_data_format == 3 ) THEN
	1159	!
	1160	!-- NetCDF4/HDF5 format
	1161	nc_stat = NF90_CREATE( filename, &
	1162	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1163	id_set_3d(av), COMM = comm2d, &
	1164	INFO = MPI_INFO_NULL )
	1165
	1166	ELSEIF ( netcdf_data_format == 4 ) THEN
	1167	!
	1168	!-- NetCDF4/HDF5 format with classic model flag
	1169	nc_stat = NF90_CREATE( filename, &
	1170	OR( NF90_NOCLOBBER, &
	1171	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1172	id_set_3d(av), COMM = comm2d, &
	1173	INFO = MPI_INFO_NULL )
[1]	1174	#endif
	1175	ENDIF
[493]	1176
[263]	1177	CALL handle_netcdf_error( 'check_open', 37 )
[493]	1178
[1]	1179	!
	1180	!-- Define the header
	1181	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1182
[493]	1183	!
	1184	!-- In case of parallel NetCDF output, create flag file which tells
	1185	!-- combine_plot_fields that nothing is to do.
	1186	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	1187	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1188	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1189	CLOSE( 99 )
	1190	ENDIF
	1191
[1]	1192	ENDIF
	1193
	1194
	1195	CASE ( 107 )
	1196	!
[102]	1197	!-- Set filename
	1198	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1199
	1200	!
[1]	1201	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1202	!-- be opened for extension, if its variables match the actual run.
[102]	1203	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1204
	1205	IF ( netcdf_extend ) THEN
	1206	!
	1207	!-- Open an existing NetCDF file for output
[102]	1208	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
[263]	1209	CALL handle_netcdf_error( 'check_open', 38 )
	1210
[1]	1211	!
	1212	!-- Read header information and set all ids. If there is a mismatch
	1213	!-- between the previuos and the actual run, netcdf_extend is returned
	1214	!-- as .FALSE.
	1215	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1216
	1217	!
	1218	!-- Remove the local file, if it can not be extended
	1219	IF ( .NOT. netcdf_extend ) THEN
	1220	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1221	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1222	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1223	ENDIF
	1224
	1225	ENDIF
	1226
	1227	IF ( .NOT. netcdf_extend ) THEN
	1228	!
	1229	!-- Create a new NetCDF output file
[493]	1230	IF ( netcdf_data_format > 1 ) THEN
[102]	1231	nc_stat = NF90_CREATE( filename, &
[1]	1232	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1233	id_set_sp )
	1234	ELSE
[102]	1235	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1236	ENDIF
[263]	1237	CALL handle_netcdf_error( 'check_open', 40 )
[1]	1238	!
	1239	!-- Define the header
	1240	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1241
	1242	ENDIF
	1243
	1244
	1245	CASE ( 108 )
	1246
	1247	IF ( myid_char == '' ) THEN
[102]	1248	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1249	ELSE
[105]	1250	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1251	myid_char
[1]	1252	ENDIF
	1253	!
	1254	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1255	!-- be opened for extension, if its variables match the actual run.
	1256	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1257
	1258	IF ( netcdf_extend ) THEN
	1259	!
	1260	!-- Open an existing NetCDF file for output
	1261	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
[263]	1262	CALL handle_netcdf_error( 'check_open', 41 )
[1]	1263	!
	1264	!-- Read header information and set all ids. If there is a mismatch
	1265	!-- between the previuos and the actual run, netcdf_extend is returned
	1266	!-- as .FALSE.
	1267	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1268
	1269	!
	1270	!-- Remove the local file, if it can not be extended
	1271	IF ( .NOT. netcdf_extend ) THEN
	1272	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1273	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1274	CALL local_system( 'rm ' // filename )
	1275	ENDIF
	1276
	1277	ENDIF
	1278
	1279	IF ( .NOT. netcdf_extend ) THEN
	1280
	1281	!
	1282	!-- For runs on multiple processors create the subdirectory
	1283	IF ( myid_char /= '' ) THEN
	1284	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1285	THEN ! needs modification in case of non-extendable sets
[102]	1286	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1287	TRIM( coupling_char ) // '/' )
[1]	1288	ENDIF
	1289	#if defined( __parallel )
	1290	!
	1291	!-- Set a barrier in order to allow that all other processors in the
	1292	!-- directory created by PE0 can open their file
	1293	CALL MPI_BARRIER( comm2d, ierr )
	1294	#endif
	1295	ENDIF
	1296
	1297	!
[519]	1298	!-- Create a new NetCDF output file with requested NetCDF format
	1299	IF ( netcdf_data_format == 1 ) THEN
	1300	!
	1301	!-- Classic NetCDF format
	1302	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1303
	1304	ELSEIF ( netcdf_data_format == 2 ) THEN
	1305	!
	1306	!-- 64bit-offset format
[1]	1307	nc_stat = NF90_CREATE( filename, &
	1308	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1309	id_set_prt )
[519]	1310
	1311	#if defined( __netcdf4 )
	1312	ELSEIF ( netcdf_data_format == 3 ) THEN
	1313	!
	1314	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
	1315	nc_stat = NF90_CREATE( filename, &
	1316	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1317	id_set_prt )
	1318
	1319	ELSEIF ( netcdf_data_format == 4 ) THEN
	1320	!
	1321	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
	1322	!-- output into a single file!
	1323	nc_stat = NF90_CREATE( filename, &
	1324	OR( NF90_NOCLOBBER, &
	1325	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1326	id_set_prt )
	1327	#endif
[1]	1328	ENDIF
[667]	1329
[263]	1330	CALL handle_netcdf_error( 'check_open', 43 )
[1]	1331
	1332	!
	1333	!-- Define the header
	1334	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1335
	1336	ENDIF
	1337
	1338	CASE ( 109 )
	1339	!
[102]	1340	!-- Set filename
	1341	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1342
	1343	!
[1]	1344	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1345	!-- be opened for extension, if its variables match the actual run.
[102]	1346	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1347
	1348	IF ( netcdf_extend ) THEN
	1349	!
	1350	!-- Open an existing NetCDF file for output
[102]	1351	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
[263]	1352	CALL handle_netcdf_error( 'check_open', 393 )
[1]	1353	!
	1354	!-- Read header information and set all ids. If there is a mismatch
	1355	!-- between the previuos and the actual run, netcdf_extend is returned
	1356	!-- as .FALSE.
	1357	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1358
	1359	!
	1360	!-- Remove the local file, if it can not be extended
	1361	IF ( .NOT. netcdf_extend ) THEN
	1362	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1363	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1364	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1365	ENDIF
	1366
	1367	ENDIF
	1368
	1369	IF ( .NOT. netcdf_extend ) THEN
	1370	!
	1371	!-- Create a new NetCDF output file
[493]	1372	IF ( netcdf_data_format > 1 ) THEN
[102]	1373	nc_stat = NF90_CREATE( filename, &
[1]	1374	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1375	id_set_pts )
	1376	ELSE
[102]	1377	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1378	ENDIF
[263]	1379	CALL handle_netcdf_error( 'check_open', 395 )
[1]	1380	!
	1381	!-- Define the header
	1382	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1383
	1384	ENDIF
[410]	1385
[564]	1386	CASE ( 201:200+2*max_masks )
[410]	1387	!
	1388	!-- Set filename depending on unit number
[564]	1389	IF ( file_id <= 200+max_masks ) THEN
	1390	mid = file_id - 200
[410]	1391	WRITE ( mask_char,'(I2.2)') mid
	1392	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
	1393	av = 0
	1394	ELSE
[564]	1395	mid = file_id - (200+max_masks)
[410]	1396	WRITE ( mask_char,'(I2.2)') mid
	1397	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
	1398	coupling_char
	1399	av = 1
	1400	ENDIF
	1401	!
	1402	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1403	!-- be opened for extension, if its dimensions and variables match the
	1404	!-- actual run.
	1405	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1406
	1407	IF ( netcdf_extend ) THEN
	1408	!
	1409	!-- Open an existing NetCDF file for output
	1410	#if defined( __netcdf4 )
[493]	1411	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
	1412	COMM = comm2d, INFO = MPI_INFO_NULL )
[1]	1413	#else
[410]	1414	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
	1415	#endif
[564]	1416	CALL handle_netcdf_error( 'check_open', 456 )
[410]	1417	!
	1418	!-- Read header information and set all ids. If there is a mismatch
	1419	!-- between the previuos and the actual run, netcdf_extend is returned
	1420	!-- as .FALSE.
	1421	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
[1]	1422
[410]	1423	!
	1424	!-- Remove the local file, if it can not be extended
	1425	IF ( .NOT. netcdf_extend ) THEN
	1426	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[564]	1427	CALL handle_netcdf_error( 'check_open', 457 )
[410]	1428	CALL local_system('rm ' // TRIM( filename ) )
	1429	ENDIF
[1]	1430
[410]	1431	ENDIF
	1432
	1433	IF ( .NOT. netcdf_extend ) THEN
[1]	1434	!
[493]	1435	!-- Create a new NetCDF output file with requested NetCDF format
	1436	IF ( netcdf_data_format == 1 ) THEN
	1437	!
	1438	!-- Classic NetCDF format
	1439	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
	1440	id_set_mask(mid,av) )
[410]	1441
[493]	1442	ELSEIF ( netcdf_data_format == 2 ) THEN
	1443	!
	1444	!-- 64bit-offset format
	1445	nc_stat = NF90_CREATE( filename, &
	1446	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1447	id_set_mask(mid,av) )
[410]	1448
	1449
	1450	#if defined( __netcdf4 )
[493]	1451	ELSEIF ( netcdf_data_format == 3 ) THEN
	1452	!
	1453	!-- NetCDF4/HDF5 format
	1454	nc_stat = NF90_CREATE( filename, &
	1455	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1456	id_set_mask(mid,av), COMM = comm2d, &
	1457	INFO = MPI_INFO_NULL )
[410]	1458
[493]	1459	ELSEIF ( netcdf_data_format == 4 ) THEN
	1460	!
	1461	!-- NetCDF4/HDF5 format with classic model flag
	1462	nc_stat = NF90_CREATE( filename, &
	1463	OR( NF90_NOCLOBBER, &
	1464	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1465	id_set_mask(mid,av), COMM = comm2d, &
	1466	INFO = MPI_INFO_NULL )
[410]	1467	#endif
[493]	1468	ENDIF
[410]	1469
[564]	1470	CALL handle_netcdf_error( 'check_open', 458 )
[410]	1471	!
	1472	!-- Define the header
	1473	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
	1474
	1475	ENDIF
	1476
	1477
	1478	#else
	1479
[564]	1480	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1481
	1482	!
[1]	1483	!-- Nothing is done in case of missing netcdf support
	1484	RETURN
	1485
	1486	#endif
	1487
	1488	CASE DEFAULT
	1489
[247]	1490	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1491	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1492
	1493	END SELECT
	1494
	1495	!
	1496	!-- Set open flag
	1497	openfile(file_id)%opened = .TRUE.
	1498
	1499	!
	1500	!-- Formats
	1501	3300 FORMAT ('#'/ &
	1502	'coord 1 file=',A,' filetype=unformatted'/ &
	1503	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1504	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1505	'#')
	1506	4000 FORMAT ('# ',A)
	1507	5000 FORMAT ('# ',A/ &
	1508	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1509	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1510	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1511	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1512	8000 FORMAT (A/ &
	1513	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1514	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1515	103('-'))
	1516
	1517	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |