Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 623

Last change on this file since 623 was 601, checked in by raasch, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 55.5 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
	3	!------------------------------------------------------------------------------!
[247]	4	! Current revisions:
[1]	5	! -----------------
[601]	6	!
[1]	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: check_open.f90 601 2010-11-24 16:42:38Z raasch $
[77]	11	!
[601]	12	! 600 2010-11-24 16:10:51Z raasch
	13	! bugfix in opening of cross section netcdf-files (parallel opening with
	14	! netcdf4 only works for netcdf_data_format > 2)
	15	!
[565]	16	! 564 2010-09-30 13:18:59Z helmke
	17	! start number of mask output files changed to 201, netcdf message identifiers
	18	! of masked output changed
	19	!
[520]	20	! 519 2010-03-19 05:30:02Z raasch
	21	! NetCDF4 support for particle data
	22	!
[494]	23	! 493 2010-03-01 08:30:24Z raasch
	24	! NetCDF4 support (parallel output)
	25	!
[449]	26	! 410 2009-12-04 17:05:40Z letzel
	27	! masked data output
	28	!
[392]	29	! 277 2009-03-31 09:13:47Z heinze
	30	! Output of NetCDF messages with aid of message handling routine.
	31	! Output of messages replaced by message handling routine
	32	!
[198]	33	! 146 2008-01-17 13:08:34Z raasch
	34	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	35	! because only this file contains the global variables,
	36	! myid_char_14 removed
	37	!
[139]	38	! 120 2007-10-17 11:54:43Z raasch
	39	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
	40	!
[110]	41	! 105 2007-08-08 07:12:55Z raasch
	42	! Different filenames are used in case of a coupled simulation,
	43	! coupling_char added to all relevant filenames
	44	!
[83]	45	! 82 2007-04-16 15:40:52Z raasch
	46	! Call of local_getenv removed, preprocessor directives for old systems removed
	47	!
[77]	48	! 46 2007-03-05 06:00:47Z raasch
	49	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	50	!
[3]	51	! RCS Log replace by Id keyword, revision history cleaned up
	52	!
[1]	53	! Revision 1.44 2006/08/22 13:48:34 raasch
	54	! xz and yz cross sections now up to nzt+1
	55	!
	56	! Revision 1.1 1997/08/11 06:10:55 raasch
	57	! Initial revision
	58	!
	59	!
	60	! Description:
	61	! ------------
	62	! Check if file unit is open. If not, open file and, if necessary, write a
	63	! header or start other initializing actions, respectively.
	64	!------------------------------------------------------------------------------!
	65
	66	USE array_kind
	67	USE arrays_3d
	68	USE control_parameters
	69	USE grid_variables
	70	USE indices
	71	USE netcdf_control
	72	USE particle_attributes
	73	USE pegrid
	74	USE profil_parameter
	75	USE statistics
	76
	77	IMPLICIT NONE
	78
[410]	79	CHARACTER (LEN=2) :: mask_char, suffix
[82]	80	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	81	CHARACTER (LEN=30) :: filename
	82	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	83	avs_data_file_localname
	84	CHARACTER (LEN=80) :: rtext
	85	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	86	batch_scp, zeile
	87	CHARACTER (LEN=400) :: command
	88
	89	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
	90	j, k, legpos = 1, timodex = 1
	91	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
	92
	93	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	94	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	95	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	96
	97	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	98	sizex = 250.0, sizey = 40.0, texfac = 1.5
	99
	100	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	101	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	102
	103
	104	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
	105	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
	106	rand, rlegfak, sizex, sizey, texfac, &
	107	timodex, twoxa, twoya, xtext
	108
	109
	110	!
	111	!-- Immediate return if file already open
	112	IF ( openfile(file_id)%opened ) RETURN
	113
	114	!
	115	!-- Only certain files are allowed to be re-opened
	116	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	117	!-- has not been checked so far, if it works!
	118	IF ( openfile(file_id)%opened_before ) THEN
	119	SELECT CASE ( file_id )
[143]	120	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	121	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	122	message_string = 're-open of unit ' // &
[274]	123	'14 is not verified. Please check results!'
[247]	124	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	125	ENDIF
[143]	126
[1]	127	CASE DEFAULT
[247]	128	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	129	' is not allowed'
[247]	130	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	131
[1]	132	RETURN
[143]	133
[1]	134	END SELECT
	135	ENDIF
	136
	137	!
	138	!-- Check if file may be opened on the relevant PE
	139	SELECT CASE ( file_id )
	140
[493]	141	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
[410]	142
[493]	143	IF ( myid /= 0 ) THEN
	144	WRITE( message_string, * ) 'opening file-id ',file_id, &
	145	' not allowed for PE ',myid
	146	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	147	ENDIF
	148
[564]	149	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	150
	151	IF ( netcdf_data_format < 3 ) THEN
[247]	152
[410]	153	IF ( myid /= 0 ) THEN
	154	WRITE( message_string, * ) 'opening file-id ',file_id, &
	155	' not allowed for PE ',myid
	156	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	157	ENDIF
	158
[493]	159	ENDIF
[1]	160
	161	CASE ( 21, 22, 23 )
	162
	163	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	164	IF ( myid /= 0 ) THEN
[247]	165	WRITE( message_string, * ) 'opening file-id ',file_id, &
	166	' not allowed for PE ',myid
[277]	167	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	168	END IF
[1]	169	ENDIF
	170
	171	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	172
	173	!
	174	!-- File-ids that are used temporarily in other routines
[247]	175	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	176	' is not allowed since it is used otherwise'
[247]	177	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	178
[1]	179	END SELECT
	180
	181	!
	182	!-- Open relevant files
	183	SELECT CASE ( file_id )
	184
	185	CASE ( 11 )
	186
[102]	187	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	188	STATUS='OLD' )
[1]	189
	190	CASE ( 13 )
	191
	192	IF ( myid_char == '' ) THEN
[102]	193	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	194	FORM='UNFORMATTED', STATUS='OLD' )
[1]	195	ELSE
[143]	196	!
	197	!-- First opening of unit 13 openes file _0000 on all PEs because only
	198	!-- this file contains the global variables
	199	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	200	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	201	FORM='UNFORMATTED', STATUS='OLD' )
	202	ELSE
	203	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	204	FORM='UNFORMATTED', STATUS='OLD' )
	205	ENDIF
[1]	206	ENDIF
	207
	208	CASE ( 14 )
	209
	210	IF ( myid_char == '' ) THEN
[102]	211	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	212	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	213	ELSE
	214	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	215	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	216	ENDIF
	217	#if defined( __parallel )
	218	!
	219	!-- Set a barrier in order to allow that all other processors in the
	220	!-- directory created by PE0 can open their file
	221	CALL MPI_BARRIER( comm2d, ierr )
	222	#endif
[146]	223	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[102]	224	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	225	ENDIF
	226
	227	CASE ( 15 )
	228
[102]	229	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	230
	231	CASE ( 16 )
	232
[102]	233	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	234
	235	CASE ( 17 )
	236
[102]	237	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	238
	239	CASE ( 18 )
	240
[102]	241	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	242
	243	CASE ( 19 )
	244
[102]	245	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	246
	247	CASE ( 20 )
	248
	249	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	250	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	251	ENDIF
	252	IF ( myid_char == '' ) THEN
[105]	253	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	254	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	255	ELSE
	256	#if defined( __parallel )
	257	!
	258	!-- Set a barrier in order to allow that all other processors in the
	259	!-- directory created by PE0 can open their file
	260	CALL MPI_BARRIER( comm2d, ierr )
	261	#endif
[105]	262	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	263	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	264	ENDIF
	265
	266	CASE ( 21 )
	267
	268	IF ( data_output_2d_on_each_pe ) THEN
[105]	269	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	270	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	271	ELSE
[102]	272	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	273	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	274	ENDIF
	275
	276	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	277	!
	278	!-- Output for combine_plot_fields
	279	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	280	WRITE (21) -1, nx+1, -1, ny+1 ! total array size
	281	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	282	ENDIF
	283	!
	284	!-- Determine and write ISO2D coordiante header
	285	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	286	hu = 0.0
	287	ho = (ny+1) * dy
	288	DO i = 1, ny
	289	eta(i) = REAL( i ) / ( ny + 1.0 )
	290	ENDDO
	291	eta(0) = 0.0
	292	eta(ny+1) = 1.0
	293
	294	WRITE (21) dx,eta,hu,ho
	295	DEALLOCATE( eta, ho, hu )
	296
	297	!
	298	!-- Create output file for local parameters
	299	IF ( iso2d_output ) THEN
[102]	300	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	301	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	302	openfile(27)%opened = .TRUE.
	303	ENDIF
	304
	305	ENDIF
	306
	307	CASE ( 22 )
	308
	309	IF ( data_output_2d_on_each_pe ) THEN
[105]	310	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	311	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	312	ELSE
[102]	313	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	314	POSITION='APPEND' )
	315	ENDIF
	316
	317	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	318	!
	319	!-- Output for combine_plot_fields
	320	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	321	WRITE (22) -1, nx+1, 0, nz+1 ! total array size
	322	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	323	ENDIF
	324	!
	325	!-- Determine and write ISO2D coordiante header
	326	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	327	hu = 0.0
	328	ho = zu(nz+1)
	329	DO i = 1, nz
	330	eta(i) = REAL( zu(i) ) / zu(nz+1)
	331	ENDDO
	332	eta(0) = 0.0
	333	eta(nz+1) = 1.0
	334
	335	WRITE (22) dx,eta,hu,ho
	336	DEALLOCATE( eta, ho, hu )
	337	!
	338	!-- Create output file for local parameters
[102]	339	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	340	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	341	openfile(28)%opened = .TRUE.
	342
	343	ENDIF
	344
	345	CASE ( 23 )
	346
	347	IF ( data_output_2d_on_each_pe ) THEN
[105]	348	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	349	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	350	ELSE
[102]	351	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	352	POSITION='APPEND' )
	353	ENDIF
	354
	355	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	356	!
	357	!-- Output for combine_plot_fields
	358	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	359	WRITE (23) -1, ny+1, 0, nz+1 ! total array size
	360	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	361	ENDIF
	362	!
	363	!-- Determine and write ISO2D coordiante header
	364	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	365	hu = 0.0
	366	ho = zu(nz+1)
	367	DO i = 1, nz
	368	eta(i) = REAL( zu(i) ) / zu(nz+1)
	369	ENDDO
	370	eta(0) = 0.0
	371	eta(nz+1) = 1.0
	372
	373	WRITE (23) dx,eta,hu,ho
	374	DEALLOCATE( eta, ho, hu )
	375	!
	376	!-- Create output file for local parameters
[102]	377	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	378	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	379	openfile(29)%opened = .TRUE.
	380
	381	ENDIF
	382
	383	CASE ( 30 )
	384
[105]	385	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	386	FORM='UNFORMATTED' )
[1]	387	!
	388	!-- Write coordinate file for AVS
	389	IF ( myid == 0 ) THEN
	390	#if defined( __parallel )
	391	!
	392	!-- Specifications for combine_plot_fields
	393	IF ( .NOT. do3d_compress ) THEN
	394	WRITE ( 30 ) -1,nx+1,-1,ny+1,0,nz_do3d
	395	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	396	ENDIF
	397	#endif
	398	!
	399	!-- Write coordinate file for AVS:
	400	!-- First determine file names (including cyle numbers) of AVS files on
	401	!-- target machine (to which the files are to be transferred).
	402	!-- Therefore path information has to be obtained first.
	403	IF ( avs_output ) THEN
[82]	404	iaddres = LEN_TRIM( return_addres )
	405	iusern = LEN_TRIM( return_username )
[1]	406
	407	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	408	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	409	.NOT. avs_data_file_found )
	410
	411	READ ( 3, '(A)', END=1 ) zeile
	412
	413	SELECT CASE ( zeile(1:11) )
	414
	415	CASE ( 'PLOT3D_COOR' )
	416	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	417	avs_coor_file_localname
	418	avs_coor_file_found = .TRUE.
	419
	420	CASE ( 'PLOT3D_DATA' )
	421	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	422	avs_data_file_localname
	423	avs_data_file_found = .TRUE.
	424
	425	CASE DEFAULT
	426	READ ( 3, '(A/A)' ) zeile, zeile
	427
	428	END SELECT
	429
	430	ENDDO
	431	!
	432	!-- Now the cycle numbers on the remote machine must be obtained
	433	!-- using batch_scp
	434	1 CLOSE ( 3 )
	435	IF ( .NOT. avs_coor_file_found .OR. &
	436	.NOT. avs_data_file_found ) THEN
[274]	437	message_string= 'no filename for AVS-data-file ' // &
	438	'found in MRUN-config-file' // &
[247]	439	' &filename in FLD-file set to "unknown"'
	440	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	441
	442	avs_coor_file = 'unknown'
	443	avs_data_file = 'unknown'
	444	ELSE
	445	get_filenames = .TRUE.
	446	IF ( TRIM( host ) == 'hpmuk' .OR. &
	447	TRIM( host ) == 'lcmuk' ) THEN
	448	batch_scp = '/home/raasch/pub/batch_scp'
	449	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	450	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	451	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	452	TRIM( host ) == 'ibmb' ) THEN
	453	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	454	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	455	batch_scp = '/home/nhbksira/pub/batch_scp'
	456	ELSE
[247]	457	message_string= 'no path for batch_scp on host "' // &
	458	TRIM( host ) // '"'
	459	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	460	get_filenames = .FALSE.
	461	ENDIF
	462
	463	IF ( get_filenames ) THEN
	464	!
	465	!-- Determine the coordinate file name.
	466	!-- /etc/passwd serves as Dummy-Datei, because it is not
	467	!-- really transferred.
	468	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	469	return_username(1:iusern) // ' ' // &
[1]	470	return_addres(1:iaddres) // ' /etc/passwd "' // &
	471	TRIM( avs_coor_file_catalog ) // '" ' // &
	472	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	473
	474	CALL local_system( command )
	475	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	476	READ ( 3, '(A)' ) avs_coor_file
	477	CLOSE ( 3 )
	478	!
	479	!-- Determine the data file name
	480	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	481	return_username(1:iusern) // ' ' // &
[1]	482	return_addres(1:iaddres) // ' /etc/passwd "' // &
	483	TRIM( avs_data_file_catalog ) // '" ' // &
	484	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	485
	486	CALL local_system( command )
	487	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	488	READ ( 3, '(A)' ) avs_data_file
	489	CLOSE ( 3 )
	490
	491	ELSE
	492
	493	avs_coor_file = 'unknown'
	494	avs_data_file = 'unknown'
	495
	496	ENDIF
	497
	498	ENDIF
	499
	500	!
	501	!-- Output of the coordinate file description for FLD-file
	502	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	503	openfile(33)%opened = .TRUE.
	504	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
	505	TRIM( avs_coor_file ), (nx+2)*4, &
	506	TRIM( avs_coor_file ), (nx+2)4+(ny+2)4
	507
	508
	509	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	510	DO i = 0, nx+1
	511	xkoor(i) = i * dx
	512	ENDDO
	513	DO j = 0, ny+1
	514	ykoor(j) = j * dy
	515	ENDDO
	516	DO k = 0, nz_do3d
	517	zkoor(k) = zu(k)
	518	ENDDO
	519
	520	!
	521	!-- Create and write on AVS coordinate file
	522	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	523	openfile(31)%opened = .TRUE.
	524
	525	WRITE (31) xkoor, ykoor, zkoor
	526	DEALLOCATE( xkoor, ykoor, zkoor )
	527
	528	!
	529	!-- Create FLD file (being written on in close_file)
	530	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	531	openfile(32)%opened = .TRUE.
	532
	533	!
	534	!-- Create flag file for compressed 3D output,
	535	!-- influences output commands in mrun
	536	IF ( do3d_compress ) THEN
	537	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	538	WRITE ( 3, '(1X)' )
	539	CLOSE ( 3 )
	540	ENDIF
	541
	542	ENDIF
	543
	544	ENDIF
	545
	546	!
	547	!-- In case of data compression output of the coordinates of the
	548	!-- corresponding partial array of a PE only once at the top of the file
	549	IF ( avs_output .AND. do3d_compress ) THEN
	550	WRITE ( 30 ) nxl-1, nxr+1, nys-1, nyn+1, nzb, nz_do3d
	551	ENDIF
	552
	553	CASE ( 40:49 )
	554
	555	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
	556	suffix = ''
	557	ELSE
	558	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
	559	ENDIF
[105]	560	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
	561	TRIM( suffix ), &
[102]	562	FORM='FORMATTED' )
[1]	563	!
	564	!-- Write contents comments at the top of the file
	565	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
	566	TRIM( region( file_id - 40 ) )
	567
	568	CASE ( 50:59 )
	569
	570	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	571	suffix = ''
	572	ELSE
	573	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	574	ENDIF
[105]	575	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	576	TRIM( suffix ), &
[102]	577	FORM='FORMATTED', RECL=496 )
[1]	578	!
	579	!-- Write PROFIL parameter file for output of time series
	580	!-- NOTE: To be on the safe side, this output is done at the beginning of
	581	!-- the model run (in case of collapse) and it is repeated in
	582	!-- close_file, then, however, with value ranges for the coordinate
	583	!-- systems
	584	!
	585	!-- Firstly determine the number of the coordinate systems to be drawn
	586	cranz = 0
	587	DO j = 1, 10
	588	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	589	ENDDO
	590	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	591	TRIM( region( file_id - 50 ) )
	592	!
	593	!-- Write RAHMEN parameter
[105]	594	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	595	TRIM( suffix ), &
[102]	596	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	597	WRITE ( 90, RAHMEN )
	598	!
	599	!-- Determine and write CROSS parameters for the individual coordinate
	600	!-- systems
	601	DO j = 1, 10
	602	k = cross_ts_number_count(j)
	603	IF ( k /= 0 ) THEN
	604	!
	605	!-- Store curve numbers, colours and line style
	606	klist(1:k) = cross_ts_numbers(1:k,j)
	607	klist(k+1:10) = 999999
	608	cucol(1:k) = linecolors(1:k)
	609	lstyle(1:k) = linestyles(1:k)
	610	!
	611	!-- Write CROSS parameter
	612	WRITE ( 90, CROSS )
	613
	614	ENDIF
	615	ENDDO
	616
	617	CLOSE ( 90 )
	618	!
	619	!-- Write all labels at the top of the data file, but only during the
	620	!-- first run of a sequence of jobs. The following jobs copy the time
	621	!-- series data to the bottom of that file.
	622	IF ( runnr == 0 ) THEN
	623	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	624	' ' // TRIM( region( file_id - 50 ) )
	625	ENDIF
	626
	627
	628	CASE ( 80 )
	629
	630	IF ( myid_char == '' ) THEN
[105]	631	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	632	FORM='FORMATTED', POSITION='APPEND' )
[1]	633	ELSE
	634	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	635	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	636	ENDIF
	637	#if defined( __parallel )
	638	!
	639	!-- Set a barrier in order to allow that thereafter all other
	640	!-- processors in the directory created by PE0 can open their file.
	641	!-- WARNING: The following barrier will lead to hanging jobs, if
	642	!-- check_open is first called from routine
	643	!-- allocate_prt_memory!
	644	IF ( .NOT. openfile(80)%opened_before ) THEN
	645	CALL MPI_BARRIER( comm2d, ierr )
	646	ENDIF
	647	#endif
[105]	648	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	649	myid_char, &
[102]	650	FORM='FORMATTED', POSITION='APPEND' )
[1]	651	ENDIF
	652
	653	IF ( .NOT. openfile(80)%opened_before ) THEN
	654	WRITE ( 80, 8000 ) TRIM( run_description_header )
	655	ENDIF
	656
	657	CASE ( 81 )
	658
[102]	659	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	660	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	661
	662	CASE ( 82 )
	663
[102]	664	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	665	POSITION = 'APPEND' )
	666
	667	CASE ( 83 )
	668
[102]	669	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	670	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	671
	672	CASE ( 84 )
	673
[102]	674	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	675	POSITION='APPEND' )
	676
	677	CASE ( 85 )
	678
	679	IF ( myid_char == '' ) THEN
[105]	680	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	681	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	682	ELSE
	683	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	684	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	685	ENDIF
	686	#if defined( __parallel )
	687	!
	688	!-- Set a barrier in order to allow that thereafter all other
	689	!-- processors in the directory created by PE0 can open their file
	690	CALL MPI_BARRIER( comm2d, ierr )
	691	#endif
[105]	692	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	693	myid_char, &
[102]	694	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	695	ENDIF
	696
	697	IF ( .NOT. openfile(85)%opened_before ) THEN
	698	WRITE ( 85 ) run_description_header
	699	!
	700	!-- Attention: change version number whenever the output format on
	701	!-- unit 85 is changed (see also in routine advec_particles)
	702	rtext = 'data format version 3.0'
	703	WRITE ( 85 ) rtext
	704	WRITE ( 85 ) number_of_particle_groups, &
	705	max_number_of_particle_groups
	706	WRITE ( 85 ) particle_groups
	707	ENDIF
	708
	709	#if defined( __netcdf )
	710	CASE ( 101, 111 )
	711	!
	712	!-- Set filename depending on unit number
	713	IF ( file_id == 101 ) THEN
[102]	714	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	715	av = 0
	716	ELSE
[102]	717	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	718	av = 1
	719	ENDIF
	720	!
	721	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	722	!-- be opened for extension, if its dimensions and variables match the
	723	!-- actual run.
	724	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	725
	726	IF ( netcdf_extend ) THEN
	727	!
[493]	728	!-- Open an existing NetCDF file for output
[600]	729	IF ( netcdf_data_format < 3 ) THEN
	730	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
	731	ELSE
[493]	732	#if defined( __netcdf4 )
[600]	733	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
	734	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	735	#endif
[600]	736	ENDIF
[263]	737
	738	CALL handle_netcdf_error( 'check_open', 20 )
[1]	739	!
	740	!-- Read header information and set all ids. If there is a mismatch
	741	!-- between the previuos and the actual run, netcdf_extend is returned
	742	!-- as .FALSE.
	743	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	744
	745	!
	746	!-- Remove the local file, if it can not be extended
	747	IF ( .NOT. netcdf_extend ) THEN
	748	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	749	CALL handle_netcdf_error( 'check_open', 21 )
[493]	750	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	751	ENDIF
	752
	753	ENDIF
	754
	755	IF ( .NOT. netcdf_extend ) THEN
	756	!
[493]	757	!-- Create a new NetCDF output file with requested NetCDF format
	758	IF ( netcdf_data_format == 1 ) THEN
	759	!
	760	!-- Classic NetCDF format
	761	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	762
	763	ELSEIF ( netcdf_data_format == 2 ) THEN
	764	!
	765	!-- 64bit-offset format
[1]	766	nc_stat = NF90_CREATE( filename, &
	767	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	768	id_set_xy(av) )
[247]	769
[493]	770	#if defined( __netcdf4 )
	771	ELSEIF ( netcdf_data_format == 3 ) THEN
	772	!
	773	!-- NetCDF4/HDF5 format
	774	nc_stat = NF90_CREATE( filename, &
	775	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	776	id_set_xy(av), COMM = comm2d, &
	777	INFO = MPI_INFO_NULL )
	778
	779	ELSEIF ( netcdf_data_format == 4 ) THEN
	780	!
	781	!-- NetCDF4/HDF5 format with classic model flag
	782	nc_stat = NF90_CREATE( filename, &
	783	OR( NF90_NOCLOBBER, &
	784	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	785	id_set_xy(av), COMM = comm2d, &
	786	INFO = MPI_INFO_NULL )
[1]	787	#endif
	788	ENDIF
[493]	789
[263]	790	CALL handle_netcdf_error( 'check_open', 22 )
[493]	791
[1]	792	!
	793	!-- Define the header
	794	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	795
[493]	796	!
	797	!-- In case of parallel NetCDF output, create flag file which tells
	798	!-- combine_plot_fields that nothing is to do.
	799	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	800	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	801	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	802	CLOSE( 99 )
	803	ENDIF
	804
[1]	805	ENDIF
	806
	807	CASE ( 102, 112 )
	808	!
	809	!-- Set filename depending on unit number
	810	IF ( file_id == 102 ) THEN
[102]	811	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	812	av = 0
	813	ELSE
[102]	814	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	815	av = 1
	816	ENDIF
	817	!
	818	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	819	!-- be opened for extension, if its dimensions and variables match the
	820	!-- actual run.
	821	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	822
	823	IF ( netcdf_extend ) THEN
	824	!
[600]	825	!-- Open an existing NetCDF file for output
	826	IF ( netcdf_data_format < 3 ) THEN
	827	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
	828	ELSE
[493]	829	#if defined( __netcdf4 )
[600]	830	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
	831	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	832	#endif
[600]	833	ENDIF
	834
[263]	835	CALL handle_netcdf_error( 'check_open', 23 )
[1]	836	!
	837	!-- Read header information and set all ids. If there is a mismatch
	838	!-- between the previuos and the actual run, netcdf_extend is returned
	839	!-- as .FALSE.
	840	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	841
	842	!
	843	!-- Remove the local file, if it can not be extended
	844	IF ( .NOT. netcdf_extend ) THEN
	845	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	846	CALL handle_netcdf_error( 'check_open', 24 )
[493]	847	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	848	ENDIF
	849
	850	ENDIF
	851
	852	IF ( .NOT. netcdf_extend ) THEN
	853	!
[493]	854	!-- Create a new NetCDF output file with requested NetCDF format
	855	IF ( netcdf_data_format == 1 ) THEN
	856	!
	857	!-- Classic NetCDF format
	858	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	859
	860	ELSEIF ( netcdf_data_format == 2 ) THEN
	861	!
	862	!-- 64bit-offset format
[1]	863	nc_stat = NF90_CREATE( filename, &
	864	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	865	id_set_xz(av) )
[493]	866
	867	#if defined( __netcdf4 )
	868	ELSEIF ( netcdf_data_format == 3 ) THEN
	869	!
	870	!-- NetCDF4/HDF5 format
	871	nc_stat = NF90_CREATE( filename, &
	872	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	873	id_set_xz(av), COMM = comm2d, &
	874	INFO = MPI_INFO_NULL )
	875
	876	ELSEIF ( netcdf_data_format == 4 ) THEN
	877	!
	878	!-- NetCDF4/HDF5 format with classic model flag
	879	nc_stat = NF90_CREATE( filename, &
	880	OR( NF90_NOCLOBBER, &
	881	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	882	id_set_xz(av), COMM = comm2d, &
	883	INFO = MPI_INFO_NULL )
[1]	884	#endif
	885	ENDIF
[493]	886
[263]	887	CALL handle_netcdf_error( 'check_open', 25 )
[493]	888
[1]	889	!
	890	!-- Define the header
	891	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	892
[493]	893	!
	894	!-- In case of parallel NetCDF output, create flag file which tells
	895	!-- combine_plot_fields that nothing is to do.
	896	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	897	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	898	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	899	CLOSE( 99 )
	900	ENDIF
	901
[1]	902	ENDIF
	903
	904	CASE ( 103, 113 )
	905	!
	906	!-- Set filename depending on unit number
	907	IF ( file_id == 103 ) THEN
[102]	908	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	909	av = 0
	910	ELSE
[102]	911	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	912	av = 1
	913	ENDIF
	914	!
	915	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	916	!-- be opened for extension, if its dimensions and variables match the
	917	!-- actual run.
	918	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	919
	920	IF ( netcdf_extend ) THEN
	921	!
[600]	922	!-- Open an existing NetCDF file for output
	923	IF ( netcdf_data_format < 3 ) THEN
	924	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
	925	ELSE
[493]	926	#if defined( __netcdf4 )
[600]	927	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
	928	COMM = comm2d, INFO = MPI_INFO_NULL )
[493]	929	#endif
[600]	930	ENDIF
	931
[263]	932	CALL handle_netcdf_error( 'check_open', 26 )
[1]	933	!
	934	!-- Read header information and set all ids. If there is a mismatch
	935	!-- between the previuos and the actual run, netcdf_extend is returned
	936	!-- as .FALSE.
	937	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	938
	939	!
	940	!-- Remove the local file, if it can not be extended
	941	IF ( .NOT. netcdf_extend ) THEN
	942	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	943	CALL handle_netcdf_error( 'check_open', 27 )
[493]	944	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	945	ENDIF
	946
	947	ENDIF
	948
	949	IF ( .NOT. netcdf_extend ) THEN
	950	!
[493]	951	!-- Create a new NetCDF output file with requested NetCDF format
	952	IF ( netcdf_data_format == 1 ) THEN
	953	!
	954	!-- Classic NetCDF format
	955	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	956
	957	ELSEIF ( netcdf_data_format == 2 ) THEN
	958	!
	959	!-- 64bit-offset format
[1]	960	nc_stat = NF90_CREATE( filename, &
[493]	961	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
[1]	962	id_set_yz(av) )
[493]	963
	964	#if defined( __netcdf4 )
	965	ELSEIF ( netcdf_data_format == 3 ) THEN
	966	!
	967	!-- NetCDF4/HDF5 format
	968	nc_stat = NF90_CREATE( filename, &
	969	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	970	id_set_yz(av), COMM = comm2d, &
	971	INFO = MPI_INFO_NULL )
	972
	973	ELSEIF ( netcdf_data_format == 4 ) THEN
	974	!
	975	!-- NetCDF4/HDF5 format with classic model flag
	976	nc_stat = NF90_CREATE( filename, &
	977	OR( NF90_NOCLOBBER, &
	978	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	979	id_set_yz(av), COMM = comm2d, &
	980	INFO = MPI_INFO_NULL )
[1]	981	#endif
	982	ENDIF
[493]	983
[263]	984	CALL handle_netcdf_error( 'check_open', 28 )
[493]	985
[1]	986	!
	987	!-- Define the header
	988	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	989
[493]	990	!
	991	!-- In case of parallel NetCDF output, create flag file which tells
	992	!-- combine_plot_fields that nothing is to do.
	993	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	994	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	995	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	996	CLOSE( 99 )
	997	ENDIF
	998
[1]	999	ENDIF
	1000
	1001	CASE ( 104 )
	1002	!
[102]	1003	!-- Set filename
	1004	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	1005
	1006	!
[1]	1007	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1008	!-- be opened for extension, if its variables match the actual run.
[102]	1009	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1010
	1011	IF ( netcdf_extend ) THEN
	1012	!
	1013	!-- Open an existing NetCDF file for output
[102]	1014	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
[263]	1015	CALL handle_netcdf_error( 'check_open', 29 )
[1]	1016	!
	1017	!-- Read header information and set all ids. If there is a mismatch
	1018	!-- between the previuos and the actual run, netcdf_extend is returned
	1019	!-- as .FALSE.
	1020	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1021
	1022	!
	1023	!-- Remove the local file, if it can not be extended
	1024	IF ( .NOT. netcdf_extend ) THEN
	1025	nc_stat = NF90_CLOSE( id_set_pr )
[263]	1026	CALL handle_netcdf_error( 'check_open', 30 )
[102]	1027	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1028	ENDIF
	1029
	1030	ENDIF
	1031
	1032	IF ( .NOT. netcdf_extend ) THEN
	1033	!
	1034	!-- Create a new NetCDF output file
[493]	1035	IF ( netcdf_data_format > 1 ) THEN
[102]	1036	nc_stat = NF90_CREATE( filename, &
[1]	1037	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1038	id_set_pr )
	1039	ELSE
[102]	1040	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	1041	ENDIF
[263]	1042	CALL handle_netcdf_error( 'check_open', 31 )
[1]	1043	!
	1044	!-- Define the header
	1045	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	1046
	1047	ENDIF
	1048
	1049	CASE ( 105 )
	1050	!
[102]	1051	!-- Set filename
	1052	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	1053
	1054	!
[1]	1055	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1056	!-- be opened for extension, if its variables match the actual run.
[102]	1057	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1058
	1059	IF ( netcdf_extend ) THEN
	1060	!
	1061	!-- Open an existing NetCDF file for output
[102]	1062	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
[263]	1063	CALL handle_netcdf_error( 'check_open', 32 )
[1]	1064	!
	1065	!-- Read header information and set all ids. If there is a mismatch
	1066	!-- between the previuos and the actual run, netcdf_extend is returned
	1067	!-- as .FALSE.
	1068	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1069
	1070	!
	1071	!-- Remove the local file, if it can not be extended
	1072	IF ( .NOT. netcdf_extend ) THEN
	1073	nc_stat = NF90_CLOSE( id_set_ts )
[263]	1074	CALL handle_netcdf_error( 'check_open', 33 )
[102]	1075	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1076	ENDIF
	1077
	1078	ENDIF
	1079
	1080	IF ( .NOT. netcdf_extend ) THEN
	1081	!
	1082	!-- Create a new NetCDF output file
[493]	1083	IF ( netcdf_data_format > 1 ) THEN
[102]	1084	nc_stat = NF90_CREATE( filename, &
[1]	1085	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1086	id_set_ts )
	1087	ELSE
[102]	1088	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	1089	ENDIF
[263]	1090	CALL handle_netcdf_error( 'check_open', 34 )
[1]	1091	!
	1092	!-- Define the header
	1093	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1094
	1095	ENDIF
	1096
	1097
	1098	CASE ( 106, 116 )
	1099	!
	1100	!-- Set filename depending on unit number
	1101	IF ( file_id == 106 ) THEN
[102]	1102	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	1103	av = 0
	1104	ELSE
[102]	1105	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	1106	av = 1
	1107	ENDIF
	1108	!
[493]	1109	!-- Inquire, if there is a NetCDF file from a previous run. This should
[1]	1110	!-- be opened for extension, if its dimensions and variables match the
	1111	!-- actual run.
	1112	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1113
	1114	IF ( netcdf_extend ) THEN
	1115	!
[493]	1116	!-- Open an existing NetCDF file for output
	1117	#if defined( __netcdf4 )
	1118	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
	1119	COMM = comm2d, INFO = MPI_INFO_NULL )
	1120	#else
[1]	1121	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
[493]	1122	#endif
[263]	1123	CALL handle_netcdf_error( 'check_open', 35 )
[1]	1124	!
	1125	!-- Read header information and set all ids. If there is a mismatch
	1126	!-- between the previuos and the actual run, netcdf_extend is returned
	1127	!-- as .FALSE.
	1128	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1129
	1130	!
	1131	!-- Remove the local file, if it can not be extended
	1132	IF ( .NOT. netcdf_extend ) THEN
	1133	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1134	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1135	CALL local_system('rm ' // TRIM( filename ) )
	1136	ENDIF
	1137
	1138	ENDIF
	1139
	1140	IF ( .NOT. netcdf_extend ) THEN
	1141	!
[493]	1142	!-- Create a new NetCDF output file with requested NetCDF format
	1143	IF ( netcdf_data_format == 1 ) THEN
	1144	!
	1145	!-- Classic NetCDF format
	1146	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1147
	1148	ELSEIF ( netcdf_data_format == 2 ) THEN
	1149	!
	1150	!-- 64bit-offset format
[1]	1151	nc_stat = NF90_CREATE( filename, &
	1152	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1153	id_set_3d(av) )
[493]	1154
	1155	#if defined( __netcdf4 )
	1156	ELSEIF ( netcdf_data_format == 3 ) THEN
	1157	!
	1158	!-- NetCDF4/HDF5 format
	1159	nc_stat = NF90_CREATE( filename, &
	1160	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1161	id_set_3d(av), COMM = comm2d, &
	1162	INFO = MPI_INFO_NULL )
	1163
	1164	ELSEIF ( netcdf_data_format == 4 ) THEN
	1165	!
	1166	!-- NetCDF4/HDF5 format with classic model flag
	1167	nc_stat = NF90_CREATE( filename, &
	1168	OR( NF90_NOCLOBBER, &
	1169	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1170	id_set_3d(av), COMM = comm2d, &
	1171	INFO = MPI_INFO_NULL )
[1]	1172	#endif
	1173	ENDIF
[493]	1174
[263]	1175	CALL handle_netcdf_error( 'check_open', 37 )
[493]	1176
[1]	1177	!
	1178	!-- Define the header
	1179	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1180
[493]	1181	!
	1182	!-- In case of parallel NetCDF output, create flag file which tells
	1183	!-- combine_plot_fields that nothing is to do.
	1184	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
	1185	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1186	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1187	CLOSE( 99 )
	1188	ENDIF
	1189
[1]	1190	ENDIF
	1191
	1192
	1193	CASE ( 107 )
	1194	!
[102]	1195	!-- Set filename
	1196	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1197
	1198	!
[1]	1199	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1200	!-- be opened for extension, if its variables match the actual run.
[102]	1201	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1202
	1203	IF ( netcdf_extend ) THEN
	1204	!
	1205	!-- Open an existing NetCDF file for output
[102]	1206	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
[263]	1207	CALL handle_netcdf_error( 'check_open', 38 )
	1208
[1]	1209	!
	1210	!-- Read header information and set all ids. If there is a mismatch
	1211	!-- between the previuos and the actual run, netcdf_extend is returned
	1212	!-- as .FALSE.
	1213	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1214
	1215	!
	1216	!-- Remove the local file, if it can not be extended
	1217	IF ( .NOT. netcdf_extend ) THEN
	1218	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1219	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1220	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1221	ENDIF
	1222
	1223	ENDIF
	1224
	1225	IF ( .NOT. netcdf_extend ) THEN
	1226	!
	1227	!-- Create a new NetCDF output file
[493]	1228	IF ( netcdf_data_format > 1 ) THEN
[102]	1229	nc_stat = NF90_CREATE( filename, &
[1]	1230	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1231	id_set_sp )
	1232	ELSE
[102]	1233	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1234	ENDIF
[263]	1235	CALL handle_netcdf_error( 'check_open', 40 )
[1]	1236	!
	1237	!-- Define the header
	1238	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1239
	1240	ENDIF
	1241
	1242
	1243	CASE ( 108 )
	1244
	1245	IF ( myid_char == '' ) THEN
[102]	1246	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1247	ELSE
[105]	1248	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1249	myid_char
[1]	1250	ENDIF
	1251	!
	1252	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1253	!-- be opened for extension, if its variables match the actual run.
	1254	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1255
	1256	IF ( netcdf_extend ) THEN
	1257	!
	1258	!-- Open an existing NetCDF file for output
	1259	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
[263]	1260	CALL handle_netcdf_error( 'check_open', 41 )
[1]	1261	!
	1262	!-- Read header information and set all ids. If there is a mismatch
	1263	!-- between the previuos and the actual run, netcdf_extend is returned
	1264	!-- as .FALSE.
	1265	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1266
	1267	!
	1268	!-- Remove the local file, if it can not be extended
	1269	IF ( .NOT. netcdf_extend ) THEN
	1270	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1271	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1272	CALL local_system( 'rm ' // filename )
	1273	ENDIF
	1274
	1275	ENDIF
	1276
	1277	IF ( .NOT. netcdf_extend ) THEN
	1278
	1279	!
	1280	!-- For runs on multiple processors create the subdirectory
	1281	IF ( myid_char /= '' ) THEN
	1282	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1283	THEN ! needs modification in case of non-extendable sets
[102]	1284	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1285	TRIM( coupling_char ) // '/' )
[1]	1286	ENDIF
	1287	#if defined( __parallel )
	1288	!
	1289	!-- Set a barrier in order to allow that all other processors in the
	1290	!-- directory created by PE0 can open their file
	1291	CALL MPI_BARRIER( comm2d, ierr )
	1292	#endif
	1293	ENDIF
	1294
	1295	!
[519]	1296	!-- Create a new NetCDF output file with requested NetCDF format
	1297	IF ( netcdf_data_format == 1 ) THEN
	1298	!
	1299	!-- Classic NetCDF format
	1300	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1301
	1302	ELSEIF ( netcdf_data_format == 2 ) THEN
	1303	!
	1304	!-- 64bit-offset format
[1]	1305	nc_stat = NF90_CREATE( filename, &
	1306	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1307	id_set_prt )
[519]	1308
	1309	#if defined( __netcdf4 )
	1310	ELSEIF ( netcdf_data_format == 3 ) THEN
	1311	!
	1312	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
	1313	nc_stat = NF90_CREATE( filename, &
	1314	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1315	id_set_prt )
	1316
	1317	ELSEIF ( netcdf_data_format == 4 ) THEN
	1318	!
	1319	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
	1320	!-- output into a single file!
	1321	nc_stat = NF90_CREATE( filename, &
	1322	OR( NF90_NOCLOBBER, &
	1323	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1324	id_set_prt )
	1325	#endif
[1]	1326	ENDIF
[519]	1327
[263]	1328	CALL handle_netcdf_error( 'check_open', 43 )
[1]	1329
	1330	!
	1331	!-- Define the header
	1332	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1333
	1334	ENDIF
	1335
	1336	CASE ( 109 )
	1337	!
[102]	1338	!-- Set filename
	1339	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1340
	1341	!
[1]	1342	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1343	!-- be opened for extension, if its variables match the actual run.
[102]	1344	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1345
	1346	IF ( netcdf_extend ) THEN
	1347	!
	1348	!-- Open an existing NetCDF file for output
[102]	1349	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
[263]	1350	CALL handle_netcdf_error( 'check_open', 393 )
[1]	1351	!
	1352	!-- Read header information and set all ids. If there is a mismatch
	1353	!-- between the previuos and the actual run, netcdf_extend is returned
	1354	!-- as .FALSE.
	1355	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1356
	1357	!
	1358	!-- Remove the local file, if it can not be extended
	1359	IF ( .NOT. netcdf_extend ) THEN
	1360	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1361	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1362	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1363	ENDIF
	1364
	1365	ENDIF
	1366
	1367	IF ( .NOT. netcdf_extend ) THEN
	1368	!
	1369	!-- Create a new NetCDF output file
[493]	1370	IF ( netcdf_data_format > 1 ) THEN
[102]	1371	nc_stat = NF90_CREATE( filename, &
[1]	1372	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1373	id_set_pts )
	1374	ELSE
[102]	1375	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1376	ENDIF
[263]	1377	CALL handle_netcdf_error( 'check_open', 395 )
[1]	1378	!
	1379	!-- Define the header
	1380	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1381
	1382	ENDIF
[410]	1383
[564]	1384	CASE ( 201:200+2*max_masks )
[410]	1385	!
	1386	!-- Set filename depending on unit number
[564]	1387	IF ( file_id <= 200+max_masks ) THEN
	1388	mid = file_id - 200
[410]	1389	WRITE ( mask_char,'(I2.2)') mid
	1390	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
	1391	av = 0
	1392	ELSE
[564]	1393	mid = file_id - (200+max_masks)
[410]	1394	WRITE ( mask_char,'(I2.2)') mid
	1395	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
	1396	coupling_char
	1397	av = 1
	1398	ENDIF
	1399	!
	1400	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1401	!-- be opened for extension, if its dimensions and variables match the
	1402	!-- actual run.
	1403	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1404
	1405	IF ( netcdf_extend ) THEN
	1406	!
	1407	!-- Open an existing NetCDF file for output
	1408	#if defined( __netcdf4 )
[493]	1409	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
	1410	COMM = comm2d, INFO = MPI_INFO_NULL )
[1]	1411	#else
[410]	1412	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
	1413	#endif
[564]	1414	CALL handle_netcdf_error( 'check_open', 456 )
[410]	1415	!
	1416	!-- Read header information and set all ids. If there is a mismatch
	1417	!-- between the previuos and the actual run, netcdf_extend is returned
	1418	!-- as .FALSE.
	1419	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
[1]	1420
[410]	1421	!
	1422	!-- Remove the local file, if it can not be extended
	1423	IF ( .NOT. netcdf_extend ) THEN
	1424	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[564]	1425	CALL handle_netcdf_error( 'check_open', 457 )
[410]	1426	CALL local_system('rm ' // TRIM( filename ) )
	1427	ENDIF
[1]	1428
[410]	1429	ENDIF
	1430
	1431	IF ( .NOT. netcdf_extend ) THEN
[1]	1432	!
[493]	1433	!-- Create a new NetCDF output file with requested NetCDF format
	1434	IF ( netcdf_data_format == 1 ) THEN
	1435	!
	1436	!-- Classic NetCDF format
	1437	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
	1438	id_set_mask(mid,av) )
[410]	1439
[493]	1440	ELSEIF ( netcdf_data_format == 2 ) THEN
	1441	!
	1442	!-- 64bit-offset format
	1443	nc_stat = NF90_CREATE( filename, &
	1444	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1445	id_set_mask(mid,av) )
[410]	1446
	1447
	1448	#if defined( __netcdf4 )
[493]	1449	ELSEIF ( netcdf_data_format == 3 ) THEN
	1450	!
	1451	!-- NetCDF4/HDF5 format
	1452	nc_stat = NF90_CREATE( filename, &
	1453	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
	1454	id_set_mask(mid,av), COMM = comm2d, &
	1455	INFO = MPI_INFO_NULL )
[410]	1456
[493]	1457	ELSEIF ( netcdf_data_format == 4 ) THEN
	1458	!
	1459	!-- NetCDF4/HDF5 format with classic model flag
	1460	nc_stat = NF90_CREATE( filename, &
	1461	OR( NF90_NOCLOBBER, &
	1462	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
	1463	id_set_mask(mid,av), COMM = comm2d, &
	1464	INFO = MPI_INFO_NULL )
[410]	1465	#endif
[493]	1466	ENDIF
[410]	1467
[564]	1468	CALL handle_netcdf_error( 'check_open', 458 )
[410]	1469	!
	1470	!-- Define the header
	1471	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
	1472
	1473	ENDIF
	1474
	1475
	1476	#else
	1477
[564]	1478	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1479
	1480	!
[1]	1481	!-- Nothing is done in case of missing netcdf support
	1482	RETURN
	1483
	1484	#endif
	1485
	1486	CASE DEFAULT
	1487
[247]	1488	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1489	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1490
	1491	END SELECT
	1492
	1493	!
	1494	!-- Set open flag
	1495	openfile(file_id)%opened = .TRUE.
	1496
	1497	!
	1498	!-- Formats
	1499	3300 FORMAT ('#'/ &
	1500	'coord 1 file=',A,' filetype=unformatted'/ &
	1501	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1502	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1503	'#')
	1504	4000 FORMAT ('# ',A)
	1505	5000 FORMAT ('# ',A/ &
	1506	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1507	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1508	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1509	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1510	8000 FORMAT (A/ &
	1511	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1512	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1513	103('-'))
	1514
	1515	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |