Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 4643

Last change on this file since 4643 was 4577, checked in by raasch, 4 years ago
further re-formatting to follow the PALM coding standard
Property svn:keywords set to `Id`
File size: 44.7 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[4546]	2	!--------------------------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[4546]	5	! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General
	6	! Public License as published by the Free Software Foundation, either version 3 of the License, or
	7	! (at your option) any later version.
[1036]	8	!
[4546]	9	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
	10	! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
	11	! Public License for more details.
[1036]	12	!
[4546]	13	! You should have received a copy of the GNU General Public License along with PALM. If not, see
	14	! <http://www.gnu.org/licenses/>.
[1036]	15	!
[4546]	16	!
[4360]	17	! Copyright 1997-2020 Leibniz Universitaet Hannover
[4546]	18	!--------------------------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[3705]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 4577 2020-06-25 09:53:58Z pavelkrc $
[4577]	27	! further re-formatting to follow the PALM coding standard
	28	!
	29	! 4546 2020-05-24 12:16:41Z raasch
[4546]	30	! file re-formatted to follow the PALM coding standard
	31	!
	32	! 4444 2020-03-05 15:59:50Z raasch
[4444]	33	! bugfix: cpp-directives for serial mode added
[4546]	34	!
[4444]	35	! 4400 2020-02-10 20:32:41Z suehring
[4400]	36	! Remove binary output for virtual measurements
[4546]	37	!
[4400]	38	! 4360 2020-01-07 11:25:50Z suehring
[4182]	39	! Corrected "Former revisions" section
[4546]	40	!
[4182]	41	! 4128 2019-07-30 16:28:58Z gronemeier
[4128]	42	! Bugfix for opening the parameter file (unit 11): return error message if file
	43	! was not found.
[4546]	44	!
[4128]	45	! 4099 2019-07-15 15:29:37Z suehring
[4099]	46	! Bugfix in opening the parameter file (unit 11) in case of ocean precursor
[4546]	47	! runs.
	48	!
[4099]	49	! 4069 2019-07-01 14:05:51Z Giersch
[4546]	50	! Masked output running index mid has been introduced as a local variable to
[4069]	51	! avoid runtime error (Loop variable has been modified) in time_integration
[4546]	52	!
[4069]	53	! 3967 2019-05-09 16:04:34Z gronemeier
[3967]	54	! Save binary data of virtual measurements within separate folder
[4546]	55	!
[3967]	56	! 3812 2019-03-25 07:10:12Z gronemeier
[3812]	57	! Open binary surface output data within separate folder
[4546]	58	!
[3812]	59	! 3705 2019-01-29 19:56:39Z suehring
[3705]	60	! Open binary files for virtual measurements
[4546]	61	!
[3705]	62	! 3704 2019-01-29 19:51:41Z suehring
[3421]	63	! Open files for surface data
[2716]	64	!
[4182]	65	! Revision 1.1 1997/08/11 06:10:55 raasch
	66	! Initial revision
	67	!
	68	!
[1]	69	! Description:
	70	! ------------
[1682]	71	!> Check if file unit is open. If not, open file and, if necessary, write a
	72	!> header or start other initializing actions, respectively.
[4546]	73	!--------------------------------------------------------------------------------------------------!
[1682]	74	SUBROUTINE check_open( file_id )
[1]	75
[4546]	76
[4444]	77	USE control_parameters, &
	78	ONLY: coupling_char, data_output_2d_on_each_pe, max_masks, message_string, openfile, &
[3241]	79	run_description_header
[1320]	80
[4444]	81	#if defined( __parallel )
[4546]	82	USE control_parameters, &
[4444]	83	ONLY: nz_do3d
	84	#endif
	85
[4546]	86	USE indices, &
[3241]	87	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nys, nz, nzb, nzt
[1320]	88
	89	USE kinds
	90
[1783]	91	#if defined( __netcdf )
	92	USE NETCDF
	93	#endif
[1320]	94
[4546]	95	USE netcdf_interface, &
	96	ONLY: id_set_agt, id_set_fl, id_set_mask, id_set_pr, &
	97	id_set_pts, id_set_sp, id_set_ts, id_set_xy, id_set_xz, &
	98	id_set_yz, id_set_3d, nc_stat, netcdf_create_file, &
	99	netcdf_data_format, netcdf_define_header, netcdf_handle_error, &
[3159]	100	netcdf_open_write_file
[1783]	101
[4546]	102	USE particle_attributes, &
	103	ONLY: max_number_of_particle_groups, number_of_particle_groups, particle_groups
[1320]	104
[1]	105	USE pegrid
	106
[4546]	107	USE posix_calls_from_fortran, &
[1986]	108	ONLY: fortran_sleep
	109
[1320]	110
[1]	111	IMPLICIT NONE
	112
[4546]	113	CHARACTER (LEN=30) :: filename !<
[2669]	114	CHARACTER (LEN=4) :: mask_char !<
[1682]	115	CHARACTER (LEN=80) :: rtext !<
[1]	116
[1682]	117	INTEGER(iwp) :: av !<
	118	INTEGER(iwp) :: file_id !<
[1986]	119	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[4069]	120	INTEGER(iwp) :: mid !< masked output running index
[4546]	121
[4099]	122	LOGICAL :: file_exist !< file check
[2512]	123	LOGICAL :: netcdf_extend !<
[1]	124
	125	!
	126	!-- Immediate return if file already open
	127	IF ( openfile(file_id)%opened ) RETURN
	128
	129	!
	130	!-- Only certain files are allowed to be re-opened
[4546]	131	!-- NOTE: some of the other files perhaps also could be re-opened, but it has not been checked so
	132	!-- far, if it works!
[1]	133	IF ( openfile(file_id)%opened_before ) THEN
	134	SELECT CASE ( file_id )
[2669]	135	CASE ( 13, 14, 21, 22, 23, 80, 85, 117 )
[4546]	136	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
	137	message_string = 're-open of unit ' // '14 is not verified. Please check results!'
	138	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	139	ENDIF
[143]	140
[1]	141	CASE DEFAULT
[4546]	142	WRITE( message_string, * ) 're-opening of file-id ', file_id, ' is not allowed'
	143	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	144
[1]	145	RETURN
[143]	146
[1]	147	END SELECT
	148	ENDIF
	149
	150	!
	151	!-- Check if file may be opened on the relevant PE
	152	SELECT CASE ( file_id )
	153
[2669]	154	CASE ( 15, 16, 17, 18, 19, 50:59, 104:105, 107, 109, 117 )
[4546]	155
[493]	156	IF ( myid /= 0 ) THEN
[4546]	157	WRITE( message_string, * ) 'opening file-id ', file_id, ' not allowed for PE ', myid
[493]	158	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	159	ENDIF
	160
[564]	161	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	162
[1031]	163	IF ( netcdf_data_format < 5 ) THEN
[4546]	164
[410]	165	IF ( myid /= 0 ) THEN
[4546]	166	WRITE( message_string, * ) 'opening file-id ', file_id, ' not allowed for PE ', myid
[410]	167	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	168	ENDIF
[4546]	169
[493]	170	ENDIF
[1]	171
	172	CASE ( 21, 22, 23 )
	173
[4546]	174	IF ( .NOT. data_output_2d_on_each_pe ) THEN
[1]	175	IF ( myid /= 0 ) THEN
[4546]	176	WRITE( message_string, * ) 'opening file-id ', file_id, ' not allowed for PE ', myid
[277]	177	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	178	END IF
[1]	179	ENDIF
	180
[2669]	181	CASE ( 90:99 )
[1]	182
	183	!
	184	!-- File-ids that are used temporarily in other routines
[4546]	185	WRITE( message_string, * ) 'opening file-id ', file_id, &
	186	' is not allowed since it is used otherwise'
	187	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	188
[1]	189	END SELECT
	190
	191	!
	192	!-- Open relevant files
	193	SELECT CASE ( file_id )
	194
	195	CASE ( 11 )
[4099]	196	!
[4546]	197	!-- Read the parameter file. Therefore, inquire whether the file exist or not. This is
	198	!-- required for the ocean-atmoshere coupling. For an ocean precursor run palmrun provides a
	199	!-- PARIN_O file instead of a PARIN file. Actually this should be considered in coupling_char,
	200	!-- however, in pmc_init the parameter file is already opened to read the nesting parameters
	201	!-- and decide whether it is a nested run or not, but coupling_char is still not set at that
	202	!-- moment (must be set after the nesting setup is read).
	203	!-- This, however, leads to the situation that for ocean precursor runs PARIN is not available
	204	!-- and the run crashes. Thus, if the file is not there, PARIN_O will be read. An ocean
	205	!-- precursor run will be the only situation where this can happen.
[4577]	206	INQUIRE( FILE='PARIN' // TRIM( coupling_char ), EXIST=file_exist )
[4546]	207
[4099]	208	IF ( file_exist ) THEN
	209	filename = 'PARIN' // TRIM( coupling_char )
	210	ELSE
	211	filename = 'PARIN_O'
	212	ENDIF
[1]	213
[4577]	214	OPEN ( 11, FILE=TRIM( filename ), FORM='FORMATTED', STATUS='OLD', IOSTAT=ioerr )
[1]	215
[4128]	216	IF ( ioerr /= 0 ) THEN
[4546]	217	message_string = 'namelist file "PARIN' // TRIM( coupling_char ) // &
	218	'" or "PARIN_O" not found!' // &
	219	'&Please have a look at the online description of the ' // &
[4128]	220	'error message for further hints.'
	221	CALL message( 'check_open', 'PA0661', 3, 2, 0, 6, 1 )
	222	ENDIF
	223
[1]	224	CASE ( 13 )
	225
	226	IF ( myid_char == '' ) THEN
[4577]	227	OPEN ( 13, FILE='BININ' // TRIM( coupling_char ) // myid_char, FORM='UNFORMATTED', &
	228	STATUS='OLD' )
[1]	229	ELSE
[143]	230	!
[4546]	231	!-- First opening of unit 13 openes file _000000 on all PEs because only this file contains
	232	!-- the global variables.
[143]	233	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[4577]	234	OPEN ( 13, FILE='BININ' // TRIM( coupling_char ) // '/_000000', FORM='UNFORMATTED',&
	235	STATUS='OLD' )
[143]	236	ELSE
[4577]	237	OPEN ( 13, FILE='BININ' // TRIM( coupling_char ) // '/' // myid_char, &
	238	FORM='UNFORMATTED', STATUS='OLD' )
[143]	239	ENDIF
[1]	240	ENDIF
	241
	242	CASE ( 14 )
	243
	244	IF ( myid_char == '' ) THEN
[4577]	245	OPEN ( 14, FILE='BINOUT' // TRIM( coupling_char ) // myid_char, FORM='UNFORMATTED', &
	246	POSITION='APPEND' )
[1]	247	ELSE
	248	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	249	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	250	ENDIF
[1804]	251	#if defined( __parallel )
[1]	252	!
[4546]	253	!-- Set a barrier in order to allow that all other processors in the directory created by
	254	!-- PE0 can open their file
[1]	255	CALL MPI_BARRIER( comm2d, ierr )
	256	#endif
[1986]	257	ioerr = 1
	258	DO WHILE ( ioerr /= 0 )
[4577]	259	OPEN ( 14, FILE='BINOUT' // TRIM(coupling_char)// '/' // myid_char, &
	260	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	261	IF ( ioerr /= 0 ) THEN
[4546]	262	WRITE( 9, * ) '*** could not open "BINOUT' // &
	263	TRIM(coupling_char) // '/' // myid_char // &
[1988]	264	'"! Trying again in 1 sec.'
	265	CALL fortran_sleep( 1 )
	266	ENDIF
[1986]	267	ENDDO
	268
[1]	269	ENDIF
	270
	271	CASE ( 15 )
	272
[4577]	273	OPEN ( 15, FILE='RUN_CONTROL' // TRIM( coupling_char ), FORM='FORMATTED' )
[1]	274
	275	CASE ( 16 )
	276
[4577]	277	OPEN ( 16, FILE='LIST_PROFIL' // TRIM( coupling_char ), FORM='FORMATTED' )
[1]	278
	279	CASE ( 17 )
	280
[4577]	281	OPEN ( 17, FILE='LIST_PROFIL_1D' // TRIM( coupling_char ), FORM='FORMATTED' )
[1]	282
	283	CASE ( 18 )
	284
[4577]	285	OPEN ( 18, FILE='CPU_MEASURES' // TRIM( coupling_char ), FORM='FORMATTED' )
[1]	286
	287	CASE ( 19 )
	288
[4577]	289	OPEN ( 19, FILE='HEADER' // TRIM( coupling_char ), FORM='FORMATTED' )
[1]	290
	291	CASE ( 20 )
	292
	293	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	294	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	295	ENDIF
	296	IF ( myid_char == '' ) THEN
[4577]	297	OPEN ( 20, FILE='DATA_LOG' // TRIM( coupling_char ) // '/_000000', FORM='UNFORMATTED',&
	298	POSITION='APPEND' )
[1]	299	ELSE
[1804]	300	#if defined( __parallel )
[1]	301	!
[4546]	302	!-- Set a barrier in order to allow that all other processors in the directory created by
	303	!-- PE0 can open their file
[1]	304	CALL MPI_BARRIER( comm2d, ierr )
	305	#endif
[1986]	306	ioerr = 1
	307	DO WHILE ( ioerr /= 0 )
[4577]	308	OPEN ( 20, FILE='DATA_LOG' // TRIM( coupling_char ) // '/' // myid_char, &
	309	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	310	IF ( ioerr /= 0 ) THEN
[4546]	311	WRITE( 9, * ) '*** could not open "DATA_LOG' // TRIM( coupling_char ) // '/' //&
	312	myid_char // '"! Trying again in 1 sec.'
[1988]	313	CALL fortran_sleep( 1 )
	314	ENDIF
[1986]	315	ENDDO
	316
[1]	317	ENDIF
	318
	319	CASE ( 21 )
	320
	321	IF ( data_output_2d_on_each_pe ) THEN
[4577]	322	OPEN ( 21, FILE='PLOT2D_XY' // TRIM( coupling_char ) // myid_char, FORM='UNFORMATTED',&
	323	POSITION='APPEND' )
[1]	324	ELSE
[4577]	325	OPEN ( 21, FILE='PLOT2D_XY' // TRIM( coupling_char ), FORM='UNFORMATTED', &
	326	POSITION='APPEND' )
[1]	327	ENDIF
	328
	329	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	330	!
[2512]	331	!-- Write index bounds of total domain for combine_plot_fields
[1]	332	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	333	WRITE (21) 0, nx, 0, ny
[1]	334	ENDIF
	335
	336	ENDIF
	337
	338	CASE ( 22 )
	339
	340	IF ( data_output_2d_on_each_pe ) THEN
[4577]	341	OPEN ( 22, FILE='PLOT2D_XZ' // TRIM( coupling_char ) // myid_char, FORM='UNFORMATTED',&
	342	POSITION='APPEND' )
[1]	343	ELSE
[4577]	344	OPEN ( 22, FILE='PLOT2D_XZ' // TRIM( coupling_char ), FORM='UNFORMATTED', &
	345	POSITION='APPEND' )
[1]	346	ENDIF
	347
	348	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	349	!
[2512]	350	!-- Write index bounds of total domain for combine_plot_fields
[1]	351	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	352	WRITE (22) 0, nx, 0, nz+1 ! output part
[1]	353	ENDIF
	354
	355	ENDIF
	356
	357	CASE ( 23 )
	358
	359	IF ( data_output_2d_on_each_pe ) THEN
[4577]	360	OPEN ( 23, FILE='PLOT2D_YZ' // TRIM( coupling_char ) // myid_char, FORM='UNFORMATTED',&
	361	POSITION='APPEND' )
[1]	362	ELSE
[4577]	363	OPEN ( 23, FILE='PLOT2D_YZ' // TRIM( coupling_char ), FORM='UNFORMATTED', &
	364	POSITION='APPEND' )
[1]	365	ENDIF
	366
	367	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	368	!
[2512]	369	!-- Write index bounds of total domain for combine_plot_fields
[1]	370	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	371	WRITE (23) 0, ny, 0, nz+1 ! output part
[1]	372	ENDIF
	373
	374	ENDIF
[4546]	375
[3421]	376	CASE ( 25 )
	377	!
	378	!-- Binary files for surface data
[4577]	379	! OPEN ( 25, FILE='SURFACE_DATA_BIN' // TRIM( coupling_char ) // myid_char, &
	380	! FORM='UNFORMATTED', POSITION='APPEND' )
[1]	381
[3812]	382	IF ( myid_char == '' ) THEN
[4577]	383	OPEN ( 25, FILE='SURFACE_DATA_BIN' // TRIM( coupling_char ) // myid_char, &
	384	FORM='UNFORMATTED', POSITION='APPEND' )
[3812]	385	ELSE
	386	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[4546]	387	CALL local_system( 'mkdir SURFACE_DATA_BIN' // TRIM( coupling_char ) )
[3812]	388	ENDIF
	389	#if defined( __parallel )
	390	!
[4546]	391	!-- Set a barrier in order to allow that all other processors in the directory created by
	392	!-- PE0 can open their file
[3812]	393	CALL MPI_BARRIER( comm2d, ierr )
	394	#endif
	395	ioerr = 1
	396	DO WHILE ( ioerr /= 0 )
[4577]	397	OPEN ( 25, FILE='SURFACE_DATA_BIN' // TRIM(coupling_char) // '/' // myid_char, &
	398	FORM='UNFORMATTED', IOSTAT=ioerr )
[3812]	399	IF ( ioerr /= 0 ) THEN
[4546]	400	WRITE( 9, * ) '*** could not open "SURFACE_DATA_BIN'// TRIM(coupling_char) // &
	401	'/' // myid_char // '"! Trying again in 1 sec.'
[3812]	402	CALL fortran_sleep( 1 )
	403	ENDIF
	404	ENDDO
	405
	406	ENDIF
	407
[3421]	408	CASE ( 26 )
	409	!
	410	!-- Binary files for averaged surface data
[4577]	411	! OPEN ( 26, FILE='SURFACE_DATA_AV_BIN' // TRIM( coupling_char ) // myid_char, &
	412	! FORM='UNFORMATTED', POSITION='APPEND' )
[3812]	413
	414	IF ( myid_char == '' ) THEN
[4577]	415	OPEN ( 26, FILE='SURFACE_DATA_AV_BIN' // TRIM( coupling_char ) // myid_char, &
	416	FORM='UNFORMATTED', POSITION='APPEND' )
[3812]	417	ELSE
	418	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[4546]	419	CALL local_system( 'mkdir SURFACE_DATA_AV_BIN' // TRIM( coupling_char ) )
[3812]	420	ENDIF
	421	#if defined( __parallel )
	422	!
[4546]	423	!-- Set a barrier in order to allow that all other processors in the directory created by
	424	!-- PE0 can open their file
[3812]	425	CALL MPI_BARRIER( comm2d, ierr )
	426	#endif
	427	ioerr = 1
	428	DO WHILE ( ioerr /= 0 )
[4577]	429	OPEN ( 26, FILE='SURFACE_DATA_AV_BIN' // TRIM( coupling_char ) // '/' // myid_char,&
	430	FORM='UNFORMATTED', IOSTAT=ioerr )
[3812]	431	IF ( ioerr /= 0 ) THEN
[4577]	432	WRITE( 9, * ) '*** could not open "SURFACE_DATA_AV_BIN' // &
	433	TRIM( coupling_char ) // '/' // myid_char // &
	434	'"! Trying again in 1 sec.'
[3812]	435	CALL fortran_sleep( 1 )
	436	ENDIF
	437	ENDDO
	438
	439	ENDIF
	440
[1]	441	CASE ( 30 )
	442
[4577]	443	OPEN ( 30, FILE='PLOT3D_DATA' // TRIM( coupling_char ) // myid_char, FORM='UNFORMATTED' )
[1]	444	!
[2512]	445	!-- Specifications for combine_plot_fields
[1]	446	IF ( myid == 0 ) THEN
	447	#if defined( __parallel )
[2512]	448	WRITE ( 30 ) 0, nx, 0, ny, 0, nz_do3d
[1]	449	#endif
	450	ENDIF
	451
	452	CASE ( 80 )
	453
	454	IF ( myid_char == '' ) THEN
[4577]	455	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, FORM='FORMATTED', &
	456	POSITION='APPEND' )
[1]	457	ELSE
	458	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[4546]	459	CALL local_system( 'mkdir PARTICLE_INFOS' // TRIM( coupling_char ) )
[1]	460	ENDIF
[1804]	461	#if defined( __parallel )
[1]	462	!
[4546]	463	!-- Set a barrier in order to allow that thereafter all other processors in the directory
	464	!-- created by PE0 can open their file.
	465	!-- WARNING: The following barrier will lead to hanging jobs, if check_open is first called
	466	!-- from routine allocate_prt_memory!
[1]	467	IF ( .NOT. openfile(80)%opened_before ) THEN
	468	CALL MPI_BARRIER( comm2d, ierr )
	469	ENDIF
	470	#endif
[4577]	471	OPEN ( 80, FILE='PARTICLE_INFOS' // TRIM( coupling_char ) // '/' // myid_char, &
	472	FORM='FORMATTED', POSITION='APPEND' )
[1]	473	ENDIF
	474
	475	IF ( .NOT. openfile(80)%opened_before ) THEN
	476	WRITE ( 80, 8000 ) TRIM( run_description_header )
	477	ENDIF
	478
	479	CASE ( 85 )
	480
	481	IF ( myid_char == '' ) THEN
[4577]	482	OPEN ( 85, FILE='PARTICLE_DATA' // TRIM(coupling_char) // myid_char, &
	483	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	484	ELSE
	485	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[4546]	486	CALL local_system( 'mkdir PARTICLE_DATA' // TRIM( coupling_char ) )
[1]	487	ENDIF
[1804]	488	#if defined( __parallel )
[1]	489	!
[4546]	490	!-- Set a barrier in order to allow that thereafter all other processors in the directory
	491	!-- created by PE0 can open their file
[1]	492	CALL MPI_BARRIER( comm2d, ierr )
	493	#endif
[1986]	494	ioerr = 1
	495	DO WHILE ( ioerr /= 0 )
[4577]	496	OPEN ( 85, FILE='PARTICLE_DATA' // TRIM( coupling_char ) // '/' // myid_char, &
	497	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	498	IF ( ioerr /= 0 ) THEN
[4546]	499	WRITE( 9, * ) '*** could not open "PARTICLE_DATA' // TRIM( coupling_char ) // &
	500	'/' // myid_char // '"! Trying again in 1 sec.'
[1988]	501	CALL fortran_sleep( 1 )
	502	ENDIF
[1986]	503	ENDDO
	504
[1]	505	ENDIF
	506
	507	IF ( .NOT. openfile(85)%opened_before ) THEN
	508	WRITE ( 85 ) run_description_header
	509	!
[4546]	510	!-- Attention: change version number whenever the output format on unit 85 is changed (see
	511	!-- also in routine lpm_data_output_particles)
[1359]	512	rtext = 'data format version 3.1'
[1]	513	WRITE ( 85 ) rtext
[4546]	514	WRITE ( 85 ) number_of_particle_groups, max_number_of_particle_groups
[1]	515	WRITE ( 85 ) particle_groups
[1359]	516	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	517	ENDIF
	518
[2063]	519	!
[4546]	520	!-- File where sky-view factors and further required data is stored will be read
[2906]	521	CASE ( 88 )
	522
	523	IF ( myid_char == '' ) THEN
[4577]	524	OPEN ( 88, FILE='SVFIN' // TRIM( coupling_char ) // myid_char, FORM='UNFORMATTED', &
	525	STATUS='OLD', IOSTAT=ioerr )
[2906]	526	ELSE
	527
[4577]	528	OPEN ( 88, FILE='SVFIN' // TRIM( coupling_char ) // '/' // myid_char, &
	529	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
[2906]	530	ENDIF
	531
	532	!
[4546]	533	!-- File where sky-view factors and further required data is stored will be created
[2906]	534	CASE ( 89 )
	535
	536	IF ( myid_char == '' ) THEN
[4577]	537	OPEN ( 89, FILE='SVFOUT' // TRIM( coupling_char ) // myid_char, FORM='UNFORMATTED', &
	538	STATUS='NEW' )
[2906]	539	ELSE
[4546]	540	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[2906]	541	CALL local_system( 'mkdir SVFOUT' // TRIM( coupling_char ) )
	542	ENDIF
	543	#if defined( __parallel )
	544	!
[4546]	545	!-- Set a barrier in order to allow that all other processors in the directory created by
	546	!-- PE0 can open their file
[2906]	547	CALL MPI_BARRIER( comm2d, ierr )
	548	#endif
	549	ioerr = 1
	550	DO WHILE ( ioerr /= 0 )
[4577]	551	OPEN ( 89, FILE='SVFOUT' // TRIM( coupling_char ) // '/' // myid_char, &
	552	FORM='UNFORMATTED', STATUS='NEW', IOSTAT=ioerr )
[2906]	553	IF ( ioerr /= 0 ) THEN
[4577]	554	WRITE( 9, * ) '*** could not open "SVFOUT' // TRIM( coupling_char ) // '/' // &
[4546]	555	myid_char // '"! Trying again in 1 sec.'
[2906]	556	CALL fortran_sleep( 1 )
	557	ENDIF
	558	ENDDO
	559
	560	ENDIF
	561
	562	!
[2063]	563	!-- Progress file that is used by the PALM watchdog
	564	CASE ( 117 )
	565
[4577]	566	OPEN ( 117, FILE='PROGRESS' // TRIM( coupling_char ), STATUS='REPLACE', FORM='FORMATTED' )
[2063]	567
[1]	568	#if defined( __netcdf )
	569	CASE ( 101, 111 )
	570	!
	571	!-- Set filename depending on unit number
	572	IF ( file_id == 101 ) THEN
[1779]	573	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	574	av = 0
	575	ELSE
[1779]	576	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	577	av = 1
	578	ENDIF
	579	!
[4546]	580	!-- Inquire, if there is a netCDF file from a previous run. This should be opened for
	581	!-- extension, if its dimensions and variables match the actual run.
[4577]	582	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	583	IF ( netcdf_extend ) THEN
	584	!
[1031]	585	!-- Open an existing netCDF file for output
[1783]	586	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	587	!
[4546]	588	!-- Read header information and set all ids. If there is a mismatch between the previous
	589	!-- and the actual run, netcdf_extend is returned as .FALSE.
[1783]	590	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	591
	592	!
	593	!-- Remove the local file, if it can not be extended
	594	IF ( .NOT. netcdf_extend ) THEN
	595	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	596	CALL netcdf_handle_error( 'check_open', 21 )
[493]	597	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	598	#if defined( __parallel )
[1745]	599	!
[4546]	600	!-- Set a barrier in order to assure that PE0 deleted the old file before any other
	601	!-- processor tries to open a new file.
[1974]	602	!-- Barrier is only needed in case of parallel I/O
	603	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	604	#endif
[1]	605	ENDIF
	606
[1745]	607	ENDIF
[1]	608
	609	IF ( .NOT. netcdf_extend ) THEN
	610	!
[1031]	611	!-- Create a new netCDF output file with requested netCDF format
[1783]	612	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	613
	614	!
[1]	615	!-- Define the header
[1783]	616	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	617
[493]	618	!
[4546]	619	!-- In case of parallel netCDF output, create flag file which tells combine_plot_fields
	620	!-- that nothing is to do.
[1031]	621	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[4577]	622	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
[493]	623	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	624	CLOSE( 99 )
	625	ENDIF
	626
[1]	627	ENDIF
	628
	629	CASE ( 102, 112 )
	630	!
	631	!-- Set filename depending on unit number
	632	IF ( file_id == 102 ) THEN
[1779]	633	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	634	av = 0
	635	ELSE
[1779]	636	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	637	av = 1
	638	ENDIF
	639	!
[4546]	640	!-- Inquire, if there is a netCDF file from a previous run. This should be opened for
	641	!-- extension, if its dimensions and variables match the actual run.
[4577]	642	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	643
	644	IF ( netcdf_extend ) THEN
	645	!
[1031]	646	!-- Open an existing netCDF file for output
[1783]	647	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	648	!
[4546]	649	!-- Read header information and set all ids. If there is a mismatch between the previous
	650	!-- and the actual run, netcdf_extend is returned as .FALSE.
[1783]	651	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	652
	653	!
	654	!-- Remove the local file, if it can not be extended
	655	IF ( .NOT. netcdf_extend ) THEN
	656	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	657	CALL netcdf_handle_error( 'check_open', 24 )
[493]	658	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	659	#if defined( __parallel )
[1745]	660	!
[4546]	661	!-- Set a barrier in order to assure that PE0 deleted the old file before any other
	662	!-- processor tries to open a new file.
[1974]	663	!-- Barrier is only needed in case of parallel I/O
	664	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	665	#endif
[1]	666	ENDIF
	667
[1745]	668	ENDIF
[1]	669
	670	IF ( .NOT. netcdf_extend ) THEN
	671	!
[1031]	672	!-- Create a new netCDF output file with requested netCDF format
[1783]	673	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	674
	675	!
[1]	676	!-- Define the header
[1783]	677	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	678
[493]	679	!
[4546]	680	!-- In case of parallel netCDF output, create flag file which tells combine_plot_fields
	681	!-- that nothing is to do.
[1031]	682	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[4577]	683	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
[493]	684	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	685	CLOSE( 99 )
	686	ENDIF
	687
[1]	688	ENDIF
	689
	690	CASE ( 103, 113 )
	691	!
	692	!-- Set filename depending on unit number
	693	IF ( file_id == 103 ) THEN
[1779]	694	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	695	av = 0
	696	ELSE
[1779]	697	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	698	av = 1
	699	ENDIF
	700	!
[4546]	701	!-- Inquire, if there is a netCDF file from a previous run. This should be opened for
	702	!-- extension, if its dimensions and variables match the actual run.
[4577]	703	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	704
	705	IF ( netcdf_extend ) THEN
	706	!
[1031]	707	!-- Open an existing netCDF file for output
[1783]	708	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	709	!
[4546]	710	!-- Read header information and set all ids. If there is a mismatch between the previous
	711	!-- and the actual run, netcdf_extend is returned as .FALSE.
[1783]	712	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	713
	714	!
	715	!-- Remove the local file, if it can not be extended
	716	IF ( .NOT. netcdf_extend ) THEN
	717	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	718	CALL netcdf_handle_error( 'check_open', 27 )
[493]	719	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	720	#if defined( __parallel )
[1745]	721	!
[4546]	722	!-- Set a barrier in order to assure that PE0 deleted the old file before any other
	723	!-- processor tries to open a new file.
[1974]	724	!-- Barrier is only needed in case of parallel I/O
	725	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	726	#endif
[1]	727	ENDIF
	728
[1745]	729	ENDIF
[1]	730
	731	IF ( .NOT. netcdf_extend ) THEN
	732	!
[1031]	733	!-- Create a new netCDF output file with requested netCDF format
[1783]	734	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	735
	736	!
[1]	737	!-- Define the header
[1783]	738	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	739
[493]	740	!
[4546]	741	!-- In case of parallel netCDF output, create flag file which tells combine_plot_fields
	742	!-- that nothing is to do.
[1031]	743	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[4577]	744	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
[493]	745	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	746	CLOSE( 99 )
	747	ENDIF
	748
[1]	749	ENDIF
	750
	751	CASE ( 104 )
	752	!
[102]	753	!-- Set filename
[1779]	754	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	755
	756	!
[4546]	757	!-- Inquire, if there is a netCDF file from a previous run. This should be opened for
	758	!-- extension, if its variables match the actual run.
[4577]	759	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	760
	761	IF ( netcdf_extend ) THEN
	762	!
[1031]	763	!-- Open an existing netCDF file for output
[1783]	764	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	765	!
[4546]	766	!-- Read header information and set all ids. If there is a mismatch between the previous
	767	!-- and the actual run, netcdf_extend is returned as .FALSE.
[1783]	768	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	769
	770	!
	771	!-- Remove the local file, if it can not be extended
	772	IF ( .NOT. netcdf_extend ) THEN
	773	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	774	CALL netcdf_handle_error( 'check_open', 30 )
[102]	775	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	776	ENDIF
	777
[4546]	778	ENDIF
[1]	779
	780	IF ( .NOT. netcdf_extend ) THEN
	781	!
[1031]	782	!-- Create a new netCDF output file with requested netCDF format
[1783]	783	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	784	!
	785	!-- Define the header
[1783]	786	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	787
	788	ENDIF
	789
	790	CASE ( 105 )
	791	!
[102]	792	!-- Set filename
[1779]	793	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	794
	795	!
[4546]	796	!-- Inquire, if there is a netCDF file from a previous run. This should be opened for
	797	!-- extension, if its variables match the actual run.
[4577]	798	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	799
	800	IF ( netcdf_extend ) THEN
	801	!
[1031]	802	!-- Open an existing netCDF file for output
[1783]	803	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	804	!
[4546]	805	!-- Read header information and set all ids. If there is a mismatch between the previous
	806	!-- and the actual run, netcdf_extend is returned as .FALSE.
[1783]	807	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	808
	809	!
	810	!-- Remove the local file, if it can not be extended
	811	IF ( .NOT. netcdf_extend ) THEN
	812	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	813	CALL netcdf_handle_error( 'check_open', 33 )
[102]	814	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	815	ENDIF
	816
[4546]	817	ENDIF
[1]	818
	819	IF ( .NOT. netcdf_extend ) THEN
	820	!
[1031]	821	!-- Create a new netCDF output file with requested netCDF format
[1783]	822	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	823	!
	824	!-- Define the header
[1783]	825	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	826
	827	ENDIF
	828
	829
	830	CASE ( 106, 116 )
	831	!
	832	!-- Set filename depending on unit number
	833	IF ( file_id == 106 ) THEN
[1779]	834	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	835	av = 0
	836	ELSE
[1779]	837	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	838	av = 1
	839	ENDIF
	840	!
[4546]	841	!-- Inquire, if there is a netCDF file from a previous run. This should be opened for
	842	!-- extension, if its dimensions and variables match the actual run.
[4577]	843	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	844	IF ( netcdf_extend ) THEN
	845	!
[1031]	846	!-- Open an existing netCDF file for output
[1783]	847	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	848	!
[4546]	849	!-- Read header information and set all ids. If there is a mismatch between the previous
	850	!-- and the actual run, netcdf_extend is returned as .FALSE.
[1783]	851	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	852
	853	!
	854	!-- Remove the local file, if it can not be extended
	855	IF ( .NOT. netcdf_extend ) THEN
	856	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	857	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	858	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	859	#if defined( __parallel )
[1745]	860	!
[4546]	861	!-- Set a barrier in order to assure that PE0 deleted the old file before any other
	862	!-- processor tries to open a new file.
[1974]	863	!-- Barrier is only needed in case of parallel I/O
	864	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	865	#endif
[1]	866	ENDIF
	867
[1745]	868	ENDIF
[1]	869
	870	IF ( .NOT. netcdf_extend ) THEN
	871	!
[1031]	872	!-- Create a new netCDF output file with requested netCDF format
[1783]	873	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	874
	875	!
[1]	876	!-- Define the header
[1783]	877	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	878
[493]	879	!
[4546]	880	!-- In case of parallel netCDF output, create flag file which tells combine_plot_fields
	881	!-- that nothing is to do.
[1031]	882	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	883	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	884	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	885	CLOSE( 99 )
	886	ENDIF
	887
[1]	888	ENDIF
	889
	890
	891	CASE ( 107 )
	892	!
[102]	893	!-- Set filename
[1779]	894	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	895
	896	!
[4546]	897	!-- Inquire, if there is a netCDF file from a previous run. This should be opened for
	898	!-- extension, if its variables match the actual run.
[102]	899	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	900
	901	IF ( netcdf_extend ) THEN
	902	!
[1031]	903	!-- Open an existing netCDF file for output
[1783]	904	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	905
[1]	906	!
[4546]	907	!-- Read header information and set all ids. If there is a mismatch between the previous
	908	!-- and the actual run, netcdf_extend is returned as .FALSE.
[1783]	909	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	910
	911	!
	912	!-- Remove the local file, if it can not be extended
	913	IF ( .NOT. netcdf_extend ) THEN
	914	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	915	CALL netcdf_handle_error( 'check_open', 39 )
[102]	916	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	917	ENDIF
	918
[4546]	919	ENDIF
[1]	920
	921	IF ( .NOT. netcdf_extend ) THEN
	922	!
[1031]	923	!-- Create a new netCDF output file with requested netCDF format
[1783]	924	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	925	!
	926	!-- Define the header
[1783]	927	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	928
	929	ENDIF
	930
[3045]	931	!
	932	!-- Currently disabled
	933	! CASE ( 108 )
[1]	934
[3045]	935	! IF ( myid_char == '' ) THEN
	936	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
	937	! ELSE
	938	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	939	! myid_char
	940	! ENDIF
[1]	941	!
[4546]	942	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	943	!-- be opened for extension, if its variables match the actual run.
[3045]	944	! INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	945
[3045]	946	! IF ( netcdf_extend ) THEN
[1]	947	!
[1031]	948	!-- Open an existing netCDF file for output
[3045]	949	! CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	950	!
	951	!-- Read header information and set all ids. If there is a mismatch
[4546]	952	!-- between the previous and the actual run, netcdf_extend is returned
[1]	953	!-- as .FALSE.
[3045]	954	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	955
	956	!
	957	!-- Remove the local file, if it can not be extended
[3045]	958	! IF ( .NOT. netcdf_extend ) THEN
	959	! nc_stat = NF90_CLOSE( id_set_prt )
	960	! CALL netcdf_handle_error( 'check_open', 42 )
	961	! CALL local_system( 'rm ' // TRIM( filename ) )
	962	! ENDIF
[1]	963
[4546]	964	! ENDIF
[1]	965
[3045]	966	! IF ( .NOT. netcdf_extend ) THEN
[1]	967
	968	!
	969	!-- For runs on multiple processors create the subdirectory
[3045]	970	! IF ( myid_char /= '' ) THEN
	971	! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	972	! THEN ! needs modification in case of non-extendable sets
	973	! CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
	974	! TRIM( coupling_char ) // '/' )
	975	! ENDIF
[1804]	976	#if defined( __parallel )
[4546]	977	!
[1]	978	!-- Set a barrier in order to allow that all other processors in the
	979	!-- directory created by PE0 can open their file
[3045]	980	! CALL MPI_BARRIER( comm2d, ierr )
[1]	981	#endif
[3045]	982	! ENDIF
[1]	983
	984	!
[1031]	985	!-- Create a new netCDF output file with requested netCDF format
[3045]	986	! CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	987
	988	!
[1]	989	!-- Define the header
[3045]	990	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	991
[3045]	992	! ENDIF
[1]	993
	994	CASE ( 109 )
	995	!
[102]	996	!-- Set filename
[1779]	997	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	998
	999	!
[4546]	1000	!-- Inquire, if there is a netCDF file from a previous run. This should be opened for
	1001	!-- extension, if its variables match the actual run.
[4577]	1002	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1003
	1004	IF ( netcdf_extend ) THEN
	1005	!
[1031]	1006	!-- Open an existing netCDF file for output
[1783]	1007	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1008	!
[4546]	1009	!-- Read header information and set all ids. If there is a mismatch between the previous
	1010	!-- and the actual run, netcdf_extend is returned as .FALSE.
[1783]	1011	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1012
	1013	!
	1014	!-- Remove the local file, if it can not be extended
	1015	IF ( .NOT. netcdf_extend ) THEN
	1016	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1017	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1018	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1019	ENDIF
	1020
[4546]	1021	ENDIF
[1]	1022
	1023	IF ( .NOT. netcdf_extend ) THEN
	1024	!
[1031]	1025	!-- Create a new netCDF output file with requested netCDF format
[1783]	1026	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1027	!
	1028	!-- Define the header
[1783]	1029	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1030
	1031	ENDIF
[410]	1032
[3159]	1033	CASE ( 118 )
	1034
	1035	IF ( myid == 0 ) THEN
	1036	filename = 'DATA_AGT_NETCDF'
[1468]	1037	!
[4546]	1038	!-- Inquire, if there is a netCDF file from a previous run. This should be opened for
	1039	!-- extension, if its variables match the actual run.
[3159]	1040	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1041
	1042	!
	1043	!-- Create a new netCDF output file with requested netCDF format
	1044	CALL netcdf_create_file( filename, id_set_agt, .FALSE., 43 )
	1045
	1046	!
	1047	!-- Define the header
	1048	CALL netcdf_define_header( 'ag', netcdf_extend, 0 )
	1049	ENDIF
	1050
	1051	! IF ( netcdf_extend ) THEN
	1052	! !
	1053	! !-- Open an existing netCDF file for output
	1054	! CALL netcdf_open_write_file( filename, id_set_agt, .FALSE., 41 )
	1055	! !
	1056	! !-- Read header information and set all ids. If there is a mismatch
[4546]	1057	! !-- between the previous and the actual run, netcdf_extend is returned
[3159]	1058	! !-- as .FALSE.
	1059	! CALL netcdf_define_header( 'ag', netcdf_extend, 0 )
[4546]	1060	!
[3159]	1061	! !
	1062	! !-- Remove the local file, if it can not be extended
	1063	! IF ( .NOT. netcdf_extend ) THEN
	1064	! nc_stat = NF90_CLOSE( id_set_agt )
	1065	! CALL netcdf_handle_error( 'check_open', 42 )
	1066	! CALL local_system( 'rm ' // TRIM( filename ) )
	1067	! ENDIF
[4546]	1068	!
[3159]	1069	! ENDIF
	1070
	1071	IF ( .NOT. netcdf_extend ) THEN
	1072
	1073	!
	1074	! !-- For runs on multiple processors create the subdirectory
	1075	! IF ( myid_char /= '' ) THEN
	1076	! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1077	! THEN ! needs modification in case of non-extendable sets
	1078	! CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
	1079	! TRIM( coupling_char ) // '/' )
	1080	! ENDIF
	1081	! #if defined( __parallel )
[4546]	1082	! !
[3159]	1083	! !-- Set a barrier in order to allow that all other processors in the
	1084	! !-- directory created by PE0 can open their file
	1085	! CALL MPI_BARRIER( comm2d, ierr )
	1086	! #endif
	1087	! ENDIF
	1088
	1089	ENDIF
	1090
[3421]	1091
[3159]	1092	!
[1957]	1093	!-- nc-file for virtual flight measurements
	1094	CASE ( 199 )
	1095	!
	1096	!-- Set filename
	1097	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1098
[1957]	1099	!
[4546]	1100	!-- Inquire, if there is a netCDF file from a previous run. This should be opened for
	1101	!-- extension, if its variables match the actual run.
[4577]	1102	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1103
[1957]	1104	IF ( netcdf_extend ) THEN
	1105	!
	1106	!-- Open an existing netCDF file for output
	1107	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1108	!
[4546]	1109	!-- Read header information and set all ids. If there is a mismatch between the previous
	1110	!-- and the actual run, netcdf_extend is returned as .FALSE.
[1957]	1111	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1112
	1113	!
	1114	!-- Remove the local file, if it can not be extended
	1115	IF ( .NOT. netcdf_extend ) THEN
	1116	nc_stat = NF90_CLOSE( id_set_fl )
	1117	CALL netcdf_handle_error( 'check_open', 533 )
	1118	CALL local_system( 'rm ' // TRIM( filename ) )
	1119	ENDIF
	1120
[4546]	1121	ENDIF
[1957]	1122
	1123	IF ( .NOT. netcdf_extend ) THEN
	1124	!
	1125	!-- Create a new netCDF output file with requested netCDF format
	1126	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1127	!
	1128	!-- Define the header
	1129	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1130
	1131	ENDIF
	1132
	1133
[564]	1134	CASE ( 201:200+2*max_masks )
[410]	1135	!
	1136	!-- Set filename depending on unit number
[564]	1137	IF ( file_id <= 200+max_masks ) THEN
	1138	mid = file_id - 200
[2669]	1139	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
[4546]	1140	filename = 'DATA_MASK_NETCDF' // TRIM( coupling_char ) // mask_char
[410]	1141	av = 0
	1142	ELSE
[564]	1143	mid = file_id - (200+max_masks)
[2669]	1144	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
[4546]	1145	filename = 'DATA_MASK_AV_NETCDF' // TRIM( coupling_char ) // mask_char
[410]	1146	av = 1
	1147	ENDIF
	1148	!
[4546]	1149	!-- Inquire, if there is a netCDF file from a previous run. This should be opened for
	1150	!-- extension, if its dimensions and variables match the actual run.
[410]	1151	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1152
	1153	IF ( netcdf_extend ) THEN
	1154	!
[1031]	1155	!-- Open an existing netCDF file for output
[4546]	1156	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), .TRUE., 456 )
[410]	1157	!
[4546]	1158	!-- Read header information and set all ids. If there is a mismatch between the previous
	1159	!-- and the actual run, netcdf_extend is returned as .FALSE.
[1783]	1160	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1161
[410]	1162	!
	1163	!-- Remove the local file, if it can not be extended
	1164	IF ( .NOT. netcdf_extend ) THEN
	1165	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1166	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1167	CALL local_system('rm ' // TRIM( filename ) )
	1168	ENDIF
[1]	1169
[4546]	1170	ENDIF
[410]	1171
	1172	IF ( .NOT. netcdf_extend ) THEN
[1]	1173	!
[1031]	1174	!-- Create a new netCDF output file with requested netCDF format
[4546]	1175	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE. , 458 )
[493]	1176	!
[410]	1177	!-- Define the header
[1783]	1178	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1179
	1180	ENDIF
	1181
	1182
	1183	#else
	1184
[564]	1185	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1186
	1187	!
[1]	1188	!-- Nothing is done in case of missing netcdf support
	1189	RETURN
	1190
	1191	#endif
	1192
	1193	CASE DEFAULT
	1194
[4546]	1195	WRITE( message_string, * ) 'no OPEN-statement for file-id ', file_id
[277]	1196	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1197
	1198	END SELECT
	1199
	1200	!
	1201	!-- Set open flag
	1202	openfile(file_id)%opened = .TRUE.
	1203
	1204	!
	1205	!-- Formats
[4546]	1206	8000 FORMAT (A/ &
	1207	' step time # of parts lPE sent/recv rPE sent/recv ', &
	1208	'sPE sent/recv nPE sent/recv max # of parts '/ &
[1359]	1209	109('-'))
[1]	1210
	1211	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |