Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 419

Last change on this file since 419 was 410, checked in by letzel, 15 years ago
reintegrate branch letzel/masked_output into trunk; new funtionality: masked data output (not yet documented)
Property svn:keywords set to `Id`
File size: 50.6 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
	3	!------------------------------------------------------------------------------!
[247]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
[1]	7	!
[410]	8	! Branch revisions:
	9	! -----------------
	10	! masked data output
	11	!
[1]	12	! Former revisions:
	13	! -----------------
[3]	14	! $Id: check_open.f90 410 2009-12-04 17:05:40Z heinze $
[77]	15	!
[392]	16	! 277 2009-03-31 09:13:47Z heinze
	17	! Output of NetCDF messages with aid of message handling routine.
	18	! Output of messages replaced by message handling routine
	19	!
[198]	20	! 146 2008-01-17 13:08:34Z raasch
	21	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	22	! because only this file contains the global variables,
	23	! myid_char_14 removed
	24	!
[139]	25	! 120 2007-10-17 11:54:43Z raasch
	26	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
	27	!
[110]	28	! 105 2007-08-08 07:12:55Z raasch
	29	! Different filenames are used in case of a coupled simulation,
	30	! coupling_char added to all relevant filenames
	31	!
[83]	32	! 82 2007-04-16 15:40:52Z raasch
	33	! Call of local_getenv removed, preprocessor directives for old systems removed
	34	!
[77]	35	! 46 2007-03-05 06:00:47Z raasch
	36	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	37	!
[3]	38	! RCS Log replace by Id keyword, revision history cleaned up
	39	!
[1]	40	! Revision 1.44 2006/08/22 13:48:34 raasch
	41	! xz and yz cross sections now up to nzt+1
	42	!
	43	! Revision 1.1 1997/08/11 06:10:55 raasch
	44	! Initial revision
	45	!
	46	!
	47	! Description:
	48	! ------------
	49	! Check if file unit is open. If not, open file and, if necessary, write a
	50	! header or start other initializing actions, respectively.
	51	!------------------------------------------------------------------------------!
	52
	53	USE array_kind
	54	USE arrays_3d
	55	USE control_parameters
	56	USE grid_variables
	57	USE indices
	58	USE netcdf_control
	59	USE particle_attributes
	60	USE pegrid
	61	USE profil_parameter
	62	USE statistics
	63
	64	IMPLICIT NONE
	65
[410]	66	CHARACTER (LEN=2) :: mask_char, suffix
[82]	67	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	68	CHARACTER (LEN=30) :: filename
	69	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	70	avs_data_file_localname
	71	CHARACTER (LEN=80) :: rtext
	72	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	73	batch_scp, zeile
	74	CHARACTER (LEN=400) :: command
	75
	76	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
	77	j, k, legpos = 1, timodex = 1
	78	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
	79
	80	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	81	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	82	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	83
	84	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	85	sizex = 250.0, sizey = 40.0, texfac = 1.5
	86
	87	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	88	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	89
	90
	91	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
	92	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
	93	rand, rlegfak, sizex, sizey, texfac, &
	94	timodex, twoxa, twoya, xtext
	95
	96
	97	!
	98	!-- Immediate return if file already open
	99	IF ( openfile(file_id)%opened ) RETURN
	100
	101	!
	102	!-- Only certain files are allowed to be re-opened
	103	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	104	!-- has not been checked so far, if it works!
	105	IF ( openfile(file_id)%opened_before ) THEN
	106	SELECT CASE ( file_id )
[143]	107	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	108	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	109	message_string = 're-open of unit ' // &
[274]	110	'14 is not verified. Please check results!'
[247]	111	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	112	ENDIF
[143]	113
[1]	114	CASE DEFAULT
[247]	115	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	116	' is not allowed'
[247]	117	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	118
[1]	119	RETURN
[143]	120
[1]	121	END SELECT
	122	ENDIF
	123
	124	!
	125	!-- Check if file may be opened on the relevant PE
	126	SELECT CASE ( file_id )
	127
	128	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 101:107, 109, 111:113, &
[410]	129	116, 121:160 )
	130
	131	IF ( .NOT. format_parallel_io) THEN
[247]	132
[410]	133	IF ( myid /= 0 ) THEN
	134	WRITE( message_string, * ) 'opening file-id ',file_id, &
	135	' not allowed for PE ',myid
	136	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	137	ENDIF
	138
	139	ENDIF
[1]	140
	141	CASE ( 21, 22, 23 )
	142
	143	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	144	IF ( myid /= 0 ) THEN
[247]	145	WRITE( message_string, * ) 'opening file-id ',file_id, &
	146	' not allowed for PE ',myid
[277]	147	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	148	END IF
[1]	149	ENDIF
	150
	151	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	152
	153	!
	154	!-- File-ids that are used temporarily in other routines
[247]	155	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	156	' is not allowed since it is used otherwise'
[247]	157	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	158
[1]	159	END SELECT
	160
	161	!
	162	!-- Open relevant files
	163	SELECT CASE ( file_id )
	164
	165	CASE ( 11 )
	166
[102]	167	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	168	STATUS='OLD' )
[1]	169
	170	CASE ( 13 )
	171
	172	IF ( myid_char == '' ) THEN
[102]	173	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	174	FORM='UNFORMATTED', STATUS='OLD' )
[1]	175	ELSE
[143]	176	!
	177	!-- First opening of unit 13 openes file _0000 on all PEs because only
	178	!-- this file contains the global variables
	179	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	180	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	181	FORM='UNFORMATTED', STATUS='OLD' )
	182	ELSE
	183	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	184	FORM='UNFORMATTED', STATUS='OLD' )
	185	ENDIF
[1]	186	ENDIF
	187
	188	CASE ( 14 )
	189
	190	IF ( myid_char == '' ) THEN
[102]	191	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	192	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	193	ELSE
	194	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	195	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	196	ENDIF
	197	#if defined( __parallel )
	198	!
	199	!-- Set a barrier in order to allow that all other processors in the
	200	!-- directory created by PE0 can open their file
	201	CALL MPI_BARRIER( comm2d, ierr )
	202	#endif
[146]	203	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[102]	204	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	205	ENDIF
	206
	207	CASE ( 15 )
	208
[102]	209	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	210
	211	CASE ( 16 )
	212
[102]	213	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	214
	215	CASE ( 17 )
	216
[102]	217	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	218
	219	CASE ( 18 )
	220
[102]	221	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	222
	223	CASE ( 19 )
	224
[102]	225	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	226
	227	CASE ( 20 )
	228
	229	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	230	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	231	ENDIF
	232	IF ( myid_char == '' ) THEN
[105]	233	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	234	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	235	ELSE
	236	#if defined( __parallel )
	237	!
	238	!-- Set a barrier in order to allow that all other processors in the
	239	!-- directory created by PE0 can open their file
	240	CALL MPI_BARRIER( comm2d, ierr )
	241	#endif
[105]	242	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	243	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	244	ENDIF
	245
	246	CASE ( 21 )
	247
	248	IF ( data_output_2d_on_each_pe ) THEN
[105]	249	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	250	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	251	ELSE
[102]	252	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	253	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	254	ENDIF
	255
	256	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	257	!
	258	!-- Output for combine_plot_fields
	259	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	260	WRITE (21) -1, nx+1, -1, ny+1 ! total array size
	261	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	262	ENDIF
	263	!
	264	!-- Determine and write ISO2D coordiante header
	265	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	266	hu = 0.0
	267	ho = (ny+1) * dy
	268	DO i = 1, ny
	269	eta(i) = REAL( i ) / ( ny + 1.0 )
	270	ENDDO
	271	eta(0) = 0.0
	272	eta(ny+1) = 1.0
	273
	274	WRITE (21) dx,eta,hu,ho
	275	DEALLOCATE( eta, ho, hu )
	276
	277	!
	278	!-- Create output file for local parameters
	279	IF ( iso2d_output ) THEN
[102]	280	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	281	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	282	openfile(27)%opened = .TRUE.
	283	ENDIF
	284
	285	ENDIF
	286
	287	CASE ( 22 )
	288
	289	IF ( data_output_2d_on_each_pe ) THEN
[105]	290	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	291	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	292	ELSE
[102]	293	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	294	POSITION='APPEND' )
	295	ENDIF
	296
	297	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	298	!
	299	!-- Output for combine_plot_fields
	300	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	301	WRITE (22) -1, nx+1, 0, nz+1 ! total array size
	302	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	303	ENDIF
	304	!
	305	!-- Determine and write ISO2D coordiante header
	306	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	307	hu = 0.0
	308	ho = zu(nz+1)
	309	DO i = 1, nz
	310	eta(i) = REAL( zu(i) ) / zu(nz+1)
	311	ENDDO
	312	eta(0) = 0.0
	313	eta(nz+1) = 1.0
	314
	315	WRITE (22) dx,eta,hu,ho
	316	DEALLOCATE( eta, ho, hu )
	317	!
	318	!-- Create output file for local parameters
[102]	319	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	320	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	321	openfile(28)%opened = .TRUE.
	322
	323	ENDIF
	324
	325	CASE ( 23 )
	326
	327	IF ( data_output_2d_on_each_pe ) THEN
[105]	328	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	329	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	330	ELSE
[102]	331	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	332	POSITION='APPEND' )
	333	ENDIF
	334
	335	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	336	!
	337	!-- Output for combine_plot_fields
	338	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	339	WRITE (23) -1, ny+1, 0, nz+1 ! total array size
	340	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	341	ENDIF
	342	!
	343	!-- Determine and write ISO2D coordiante header
	344	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	345	hu = 0.0
	346	ho = zu(nz+1)
	347	DO i = 1, nz
	348	eta(i) = REAL( zu(i) ) / zu(nz+1)
	349	ENDDO
	350	eta(0) = 0.0
	351	eta(nz+1) = 1.0
	352
	353	WRITE (23) dx,eta,hu,ho
	354	DEALLOCATE( eta, ho, hu )
	355	!
	356	!-- Create output file for local parameters
[102]	357	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	358	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	359	openfile(29)%opened = .TRUE.
	360
	361	ENDIF
	362
	363	CASE ( 30 )
	364
[105]	365	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	366	FORM='UNFORMATTED' )
[1]	367	!
	368	!-- Write coordinate file for AVS
	369	IF ( myid == 0 ) THEN
	370	#if defined( __parallel )
	371	!
	372	!-- Specifications for combine_plot_fields
	373	IF ( .NOT. do3d_compress ) THEN
	374	WRITE ( 30 ) -1,nx+1,-1,ny+1,0,nz_do3d
	375	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	376	ENDIF
	377	#endif
	378	!
	379	!-- Write coordinate file for AVS:
	380	!-- First determine file names (including cyle numbers) of AVS files on
	381	!-- target machine (to which the files are to be transferred).
	382	!-- Therefore path information has to be obtained first.
	383	IF ( avs_output ) THEN
[82]	384	iaddres = LEN_TRIM( return_addres )
	385	iusern = LEN_TRIM( return_username )
[1]	386
	387	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	388	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	389	.NOT. avs_data_file_found )
	390
	391	READ ( 3, '(A)', END=1 ) zeile
	392
	393	SELECT CASE ( zeile(1:11) )
	394
	395	CASE ( 'PLOT3D_COOR' )
	396	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	397	avs_coor_file_localname
	398	avs_coor_file_found = .TRUE.
	399
	400	CASE ( 'PLOT3D_DATA' )
	401	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	402	avs_data_file_localname
	403	avs_data_file_found = .TRUE.
	404
	405	CASE DEFAULT
	406	READ ( 3, '(A/A)' ) zeile, zeile
	407
	408	END SELECT
	409
	410	ENDDO
	411	!
	412	!-- Now the cycle numbers on the remote machine must be obtained
	413	!-- using batch_scp
	414	1 CLOSE ( 3 )
	415	IF ( .NOT. avs_coor_file_found .OR. &
	416	.NOT. avs_data_file_found ) THEN
[274]	417	message_string= 'no filename for AVS-data-file ' // &
	418	'found in MRUN-config-file' // &
[247]	419	' &filename in FLD-file set to "unknown"'
	420	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	421
	422	avs_coor_file = 'unknown'
	423	avs_data_file = 'unknown'
	424	ELSE
	425	get_filenames = .TRUE.
	426	IF ( TRIM( host ) == 'hpmuk' .OR. &
	427	TRIM( host ) == 'lcmuk' ) THEN
	428	batch_scp = '/home/raasch/pub/batch_scp'
	429	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	430	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	431	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	432	TRIM( host ) == 'ibmb' ) THEN
	433	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	434	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	435	batch_scp = '/home/nhbksira/pub/batch_scp'
	436	ELSE
[247]	437	message_string= 'no path for batch_scp on host "' // &
	438	TRIM( host ) // '"'
	439	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	440	get_filenames = .FALSE.
	441	ENDIF
	442
	443	IF ( get_filenames ) THEN
	444	!
	445	!-- Determine the coordinate file name.
	446	!-- /etc/passwd serves as Dummy-Datei, because it is not
	447	!-- really transferred.
	448	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	449	return_username(1:iusern) // ' ' // &
[1]	450	return_addres(1:iaddres) // ' /etc/passwd "' // &
	451	TRIM( avs_coor_file_catalog ) // '" ' // &
	452	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	453
	454	CALL local_system( command )
	455	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	456	READ ( 3, '(A)' ) avs_coor_file
	457	CLOSE ( 3 )
	458	!
	459	!-- Determine the data file name
	460	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	461	return_username(1:iusern) // ' ' // &
[1]	462	return_addres(1:iaddres) // ' /etc/passwd "' // &
	463	TRIM( avs_data_file_catalog ) // '" ' // &
	464	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	465
	466	CALL local_system( command )
	467	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	468	READ ( 3, '(A)' ) avs_data_file
	469	CLOSE ( 3 )
	470
	471	ELSE
	472
	473	avs_coor_file = 'unknown'
	474	avs_data_file = 'unknown'
	475
	476	ENDIF
	477
	478	ENDIF
	479
	480	!
	481	!-- Output of the coordinate file description for FLD-file
	482	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	483	openfile(33)%opened = .TRUE.
	484	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
	485	TRIM( avs_coor_file ), (nx+2)*4, &
	486	TRIM( avs_coor_file ), (nx+2)4+(ny+2)4
	487
	488
	489	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	490	DO i = 0, nx+1
	491	xkoor(i) = i * dx
	492	ENDDO
	493	DO j = 0, ny+1
	494	ykoor(j) = j * dy
	495	ENDDO
	496	DO k = 0, nz_do3d
	497	zkoor(k) = zu(k)
	498	ENDDO
	499
	500	!
	501	!-- Create and write on AVS coordinate file
	502	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	503	openfile(31)%opened = .TRUE.
	504
	505	WRITE (31) xkoor, ykoor, zkoor
	506	DEALLOCATE( xkoor, ykoor, zkoor )
	507
	508	!
	509	!-- Create FLD file (being written on in close_file)
	510	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	511	openfile(32)%opened = .TRUE.
	512
	513	!
	514	!-- Create flag file for compressed 3D output,
	515	!-- influences output commands in mrun
	516	IF ( do3d_compress ) THEN
	517	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	518	WRITE ( 3, '(1X)' )
	519	CLOSE ( 3 )
	520	ENDIF
	521
	522	ENDIF
	523
	524	ENDIF
	525
	526	!
	527	!-- In case of data compression output of the coordinates of the
	528	!-- corresponding partial array of a PE only once at the top of the file
	529	IF ( avs_output .AND. do3d_compress ) THEN
	530	WRITE ( 30 ) nxl-1, nxr+1, nys-1, nyn+1, nzb, nz_do3d
	531	ENDIF
	532
	533	CASE ( 40:49 )
	534
	535	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
	536	suffix = ''
	537	ELSE
	538	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
	539	ENDIF
[105]	540	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
	541	TRIM( suffix ), &
[102]	542	FORM='FORMATTED' )
[1]	543	!
	544	!-- Write contents comments at the top of the file
	545	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
	546	TRIM( region( file_id - 40 ) )
	547
	548	CASE ( 50:59 )
	549
	550	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	551	suffix = ''
	552	ELSE
	553	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	554	ENDIF
[105]	555	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	556	TRIM( suffix ), &
[102]	557	FORM='FORMATTED', RECL=496 )
[1]	558	!
	559	!-- Write PROFIL parameter file for output of time series
	560	!-- NOTE: To be on the safe side, this output is done at the beginning of
	561	!-- the model run (in case of collapse) and it is repeated in
	562	!-- close_file, then, however, with value ranges for the coordinate
	563	!-- systems
	564	!
	565	!-- Firstly determine the number of the coordinate systems to be drawn
	566	cranz = 0
	567	DO j = 1, 10
	568	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	569	ENDDO
	570	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	571	TRIM( region( file_id - 50 ) )
	572	!
	573	!-- Write RAHMEN parameter
[105]	574	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	575	TRIM( suffix ), &
[102]	576	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	577	WRITE ( 90, RAHMEN )
	578	!
	579	!-- Determine and write CROSS parameters for the individual coordinate
	580	!-- systems
	581	DO j = 1, 10
	582	k = cross_ts_number_count(j)
	583	IF ( k /= 0 ) THEN
	584	!
	585	!-- Store curve numbers, colours and line style
	586	klist(1:k) = cross_ts_numbers(1:k,j)
	587	klist(k+1:10) = 999999
	588	cucol(1:k) = linecolors(1:k)
	589	lstyle(1:k) = linestyles(1:k)
	590	!
	591	!-- Write CROSS parameter
	592	WRITE ( 90, CROSS )
	593
	594	ENDIF
	595	ENDDO
	596
	597	CLOSE ( 90 )
	598	!
	599	!-- Write all labels at the top of the data file, but only during the
	600	!-- first run of a sequence of jobs. The following jobs copy the time
	601	!-- series data to the bottom of that file.
	602	IF ( runnr == 0 ) THEN
	603	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	604	' ' // TRIM( region( file_id - 50 ) )
	605	ENDIF
	606
	607
	608	CASE ( 80 )
	609
	610	IF ( myid_char == '' ) THEN
[105]	611	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	612	FORM='FORMATTED', POSITION='APPEND' )
[1]	613	ELSE
	614	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	615	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	616	ENDIF
	617	#if defined( __parallel )
	618	!
	619	!-- Set a barrier in order to allow that thereafter all other
	620	!-- processors in the directory created by PE0 can open their file.
	621	!-- WARNING: The following barrier will lead to hanging jobs, if
	622	!-- check_open is first called from routine
	623	!-- allocate_prt_memory!
	624	IF ( .NOT. openfile(80)%opened_before ) THEN
	625	CALL MPI_BARRIER( comm2d, ierr )
	626	ENDIF
	627	#endif
[105]	628	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	629	myid_char, &
[102]	630	FORM='FORMATTED', POSITION='APPEND' )
[1]	631	ENDIF
	632
	633	IF ( .NOT. openfile(80)%opened_before ) THEN
	634	WRITE ( 80, 8000 ) TRIM( run_description_header )
	635	ENDIF
	636
	637	CASE ( 81 )
	638
[102]	639	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	640	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	641
	642	CASE ( 82 )
	643
[102]	644	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	645	POSITION = 'APPEND' )
	646
	647	CASE ( 83 )
	648
[102]	649	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	650	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	651
	652	CASE ( 84 )
	653
[102]	654	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	655	POSITION='APPEND' )
	656
	657	CASE ( 85 )
	658
	659	IF ( myid_char == '' ) THEN
[105]	660	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	661	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	662	ELSE
	663	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	664	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	665	ENDIF
	666	#if defined( __parallel )
	667	!
	668	!-- Set a barrier in order to allow that thereafter all other
	669	!-- processors in the directory created by PE0 can open their file
	670	CALL MPI_BARRIER( comm2d, ierr )
	671	#endif
[105]	672	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	673	myid_char, &
[102]	674	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	675	ENDIF
	676
	677	IF ( .NOT. openfile(85)%opened_before ) THEN
	678	WRITE ( 85 ) run_description_header
	679	!
	680	!-- Attention: change version number whenever the output format on
	681	!-- unit 85 is changed (see also in routine advec_particles)
	682	rtext = 'data format version 3.0'
	683	WRITE ( 85 ) rtext
	684	WRITE ( 85 ) number_of_particle_groups, &
	685	max_number_of_particle_groups
	686	WRITE ( 85 ) particle_groups
	687	ENDIF
	688
	689	#if defined( __netcdf )
	690	CASE ( 101, 111 )
	691	!
	692	!-- Set filename depending on unit number
	693	IF ( file_id == 101 ) THEN
[102]	694	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	695	av = 0
	696	ELSE
[102]	697	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	698	av = 1
	699	ENDIF
	700	!
	701	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	702	!-- be opened for extension, if its dimensions and variables match the
	703	!-- actual run.
	704	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	705
	706	IF ( netcdf_extend ) THEN
	707	!
	708	!-- Open an existing NetCDF file for output
	709	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
[263]	710
	711	CALL handle_netcdf_error( 'check_open', 20 )
[1]	712	!
	713	!-- Read header information and set all ids. If there is a mismatch
	714	!-- between the previuos and the actual run, netcdf_extend is returned
	715	!-- as .FALSE.
	716	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	717
	718	!
	719	!-- Remove the local file, if it can not be extended
	720	IF ( .NOT. netcdf_extend ) THEN
	721	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	722	CALL handle_netcdf_error( 'check_open', 21 )
[1]	723	CALL local_system( 'rm ' // TRIM( filename ) )
	724	ENDIF
	725
	726	ENDIF
	727
	728	IF ( .NOT. netcdf_extend ) THEN
	729	!
	730	!-- Create a new NetCDF output file
	731	IF ( netcdf_64bit ) THEN
	732	#if defined( __netcdf_64bit )
	733	nc_stat = NF90_CREATE( filename, &
	734	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	735	id_set_xy(av) )
	736	#else
[274]	737	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	738	'on this machine'
[247]	739	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	740
[1]	741	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	742	#endif
	743	ELSE
	744	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	745	ENDIF
[263]	746	CALL handle_netcdf_error( 'check_open', 22 )
[1]	747	!
	748	!-- Define the header
	749	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	750
	751	ENDIF
	752
	753	CASE ( 102, 112 )
	754	!
	755	!-- Set filename depending on unit number
	756	IF ( file_id == 102 ) THEN
[102]	757	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	758	av = 0
	759	ELSE
[102]	760	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	761	av = 1
	762	ENDIF
	763	!
	764	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	765	!-- be opened for extension, if its dimensions and variables match the
	766	!-- actual run.
	767	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	768
	769	IF ( netcdf_extend ) THEN
	770	!
	771	!-- Open an existing NetCDF file for output
	772	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
[263]	773	CALL handle_netcdf_error( 'check_open', 23 )
[1]	774	!
	775	!-- Read header information and set all ids. If there is a mismatch
	776	!-- between the previuos and the actual run, netcdf_extend is returned
	777	!-- as .FALSE.
	778	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	779
	780	!
	781	!-- Remove the local file, if it can not be extended
	782	IF ( .NOT. netcdf_extend ) THEN
	783	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	784	CALL handle_netcdf_error( 'check_open', 24 )
[1]	785	CALL local_system( 'rm ' // TRIM( filename ) )
	786	ENDIF
	787
	788	ENDIF
	789
	790	IF ( .NOT. netcdf_extend ) THEN
	791	!
	792	!-- Create a new NetCDF output file
	793	IF ( netcdf_64bit ) THEN
	794	#if defined( __netcdf_64bit )
	795	nc_stat = NF90_CREATE( filename, &
	796	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	797	id_set_xz(av) )
	798	#else
[274]	799	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	800	'on this machine'
[247]	801	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	802
[1]	803	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	804	#endif
	805	ELSE
	806	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	807	ENDIF
[263]	808	CALL handle_netcdf_error( 'check_open', 25 )
[1]	809	!
	810	!-- Define the header
	811	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	812
	813	ENDIF
	814
	815	CASE ( 103, 113 )
	816	!
	817	!-- Set filename depending on unit number
	818	IF ( file_id == 103 ) THEN
[102]	819	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	820	av = 0
	821	ELSE
[102]	822	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	823	av = 1
	824	ENDIF
	825	!
	826	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	827	!-- be opened for extension, if its dimensions and variables match the
	828	!-- actual run.
	829	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	830
	831	IF ( netcdf_extend ) THEN
	832	!
	833	!-- Open an existing NetCDF file for output
	834	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
[263]	835	CALL handle_netcdf_error( 'check_open', 26 )
[1]	836	!
	837	!-- Read header information and set all ids. If there is a mismatch
	838	!-- between the previuos and the actual run, netcdf_extend is returned
	839	!-- as .FALSE.
	840	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	841
	842	!
	843	!-- Remove the local file, if it can not be extended
	844	IF ( .NOT. netcdf_extend ) THEN
	845	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	846	CALL handle_netcdf_error( 'check_open', 27 )
[1]	847	CALL local_system( 'rm ' // TRIM( filename ) )
	848	ENDIF
	849
	850	ENDIF
	851
	852	IF ( .NOT. netcdf_extend ) THEN
	853	!
	854	!-- Create a new NetCDF output file
	855	IF ( netcdf_64bit ) THEN
	856	#if defined( __netcdf_64bit )
	857	nc_stat = NF90_CREATE( filename, &
	858	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET), &
	859	id_set_yz(av) )
	860	#else
[274]	861	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	862	'on this machine'
[247]	863	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	864
[1]	865	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	866	#endif
	867	ELSE
	868	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	869	ENDIF
[263]	870	CALL handle_netcdf_error( 'check_open', 28 )
[1]	871	!
	872	!-- Define the header
	873	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	874
	875	ENDIF
	876
	877	CASE ( 104 )
	878	!
[102]	879	!-- Set filename
	880	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	881
	882	!
[1]	883	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	884	!-- be opened for extension, if its variables match the actual run.
[102]	885	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	886
	887	IF ( netcdf_extend ) THEN
	888	!
	889	!-- Open an existing NetCDF file for output
[102]	890	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
[263]	891	CALL handle_netcdf_error( 'check_open', 29 )
[1]	892	!
	893	!-- Read header information and set all ids. If there is a mismatch
	894	!-- between the previuos and the actual run, netcdf_extend is returned
	895	!-- as .FALSE.
	896	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	897
	898	!
	899	!-- Remove the local file, if it can not be extended
	900	IF ( .NOT. netcdf_extend ) THEN
	901	nc_stat = NF90_CLOSE( id_set_pr )
[263]	902	CALL handle_netcdf_error( 'check_open', 30 )
[102]	903	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	904	ENDIF
	905
	906	ENDIF
	907
	908	IF ( .NOT. netcdf_extend ) THEN
	909	!
	910	!-- Create a new NetCDF output file
	911	IF ( netcdf_64bit ) THEN
	912	#if defined( __netcdf_64bit )
[102]	913	nc_stat = NF90_CREATE( filename, &
[1]	914	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	915	id_set_pr )
[247]	916	#else
[274]	917	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	918	'on this machine'
[247]	919	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	920
[102]	921	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	922	#endif
	923	ELSE
[102]	924	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	925	ENDIF
[263]	926	CALL handle_netcdf_error( 'check_open', 31 )
[1]	927	!
	928	!-- Define the header
	929	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	930
	931	ENDIF
	932
	933	CASE ( 105 )
	934	!
[102]	935	!-- Set filename
	936	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	937
	938	!
[1]	939	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	940	!-- be opened for extension, if its variables match the actual run.
[102]	941	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	942
	943	IF ( netcdf_extend ) THEN
	944	!
	945	!-- Open an existing NetCDF file for output
[102]	946	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
[263]	947	CALL handle_netcdf_error( 'check_open', 32 )
[1]	948	!
	949	!-- Read header information and set all ids. If there is a mismatch
	950	!-- between the previuos and the actual run, netcdf_extend is returned
	951	!-- as .FALSE.
	952	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	953
	954	!
	955	!-- Remove the local file, if it can not be extended
	956	IF ( .NOT. netcdf_extend ) THEN
	957	nc_stat = NF90_CLOSE( id_set_ts )
[263]	958	CALL handle_netcdf_error( 'check_open', 33 )
[102]	959	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	960	ENDIF
	961
	962	ENDIF
	963
	964	IF ( .NOT. netcdf_extend ) THEN
	965	!
	966	!-- Create a new NetCDF output file
	967	IF ( netcdf_64bit ) THEN
	968	#if defined( __netcdf_64bit )
[102]	969	nc_stat = NF90_CREATE( filename, &
[1]	970	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	971	id_set_ts )
[247]	972	#else
[274]	973	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	974	'on this machine'
[247]	975	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	976
[102]	977	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	978	#endif
	979	ELSE
[102]	980	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	981	ENDIF
[263]	982	CALL handle_netcdf_error( 'check_open', 34 )
[1]	983	!
	984	!-- Define the header
	985	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	986
	987	ENDIF
	988
	989
	990	CASE ( 106, 116 )
	991	!
	992	!-- Set filename depending on unit number
	993	IF ( file_id == 106 ) THEN
[102]	994	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	995	av = 0
	996	ELSE
[102]	997	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	998	av = 1
	999	ENDIF
	1000	!
	1001	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1002	!-- be opened for extension, if its dimensions and variables match the
	1003	!-- actual run.
	1004	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1005
	1006	IF ( netcdf_extend ) THEN
	1007	!
	1008	!-- Open an existing NetCDF file for output
	1009	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
[263]	1010	CALL handle_netcdf_error( 'check_open', 35 )
[1]	1011	!
	1012	!-- Read header information and set all ids. If there is a mismatch
	1013	!-- between the previuos and the actual run, netcdf_extend is returned
	1014	!-- as .FALSE.
	1015	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1016
	1017	!
	1018	!-- Remove the local file, if it can not be extended
	1019	IF ( .NOT. netcdf_extend ) THEN
	1020	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1021	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1022	CALL local_system('rm ' // TRIM( filename ) )
	1023	ENDIF
	1024
	1025	ENDIF
	1026
	1027	IF ( .NOT. netcdf_extend ) THEN
	1028	!
	1029	!-- Create a new NetCDF output file
[120]	1030	IF ( netcdf_64bit_3d ) THEN
[1]	1031	#if defined( __netcdf_64bit )
	1032	nc_stat = NF90_CREATE( filename, &
	1033	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1034	id_set_3d(av) )
[247]	1035	#else
[274]	1036	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	1037	'on this machine'
[247]	1038	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	1039
[1]	1040	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1041	#endif
	1042	ELSE
	1043	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1044	ENDIF
[263]	1045	CALL handle_netcdf_error( 'check_open', 37 )
[1]	1046	!
	1047	!-- Define the header
	1048	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1049
	1050	ENDIF
	1051
	1052
	1053	CASE ( 107 )
	1054	!
[102]	1055	!-- Set filename
	1056	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1057
	1058	!
[1]	1059	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1060	!-- be opened for extension, if its variables match the actual run.
[102]	1061	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1062
	1063	IF ( netcdf_extend ) THEN
	1064	!
	1065	!-- Open an existing NetCDF file for output
[102]	1066	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
[263]	1067	CALL handle_netcdf_error( 'check_open', 38 )
	1068
[1]	1069	!
	1070	!-- Read header information and set all ids. If there is a mismatch
	1071	!-- between the previuos and the actual run, netcdf_extend is returned
	1072	!-- as .FALSE.
	1073	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1074
	1075	!
	1076	!-- Remove the local file, if it can not be extended
	1077	IF ( .NOT. netcdf_extend ) THEN
	1078	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1079	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1080	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1081	ENDIF
	1082
	1083	ENDIF
	1084
	1085	IF ( .NOT. netcdf_extend ) THEN
	1086	!
	1087	!-- Create a new NetCDF output file
	1088	IF ( netcdf_64bit ) THEN
	1089	#if defined( __netcdf_64bit )
[102]	1090	nc_stat = NF90_CREATE( filename, &
[1]	1091	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1092	id_set_sp )
[247]	1093	#else
[274]	1094	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	1095	'on this machine'
[247]	1096	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	1097
[102]	1098	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1099	#endif
	1100	ELSE
[102]	1101	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1102	ENDIF
[263]	1103	CALL handle_netcdf_error( 'check_open', 40 )
[1]	1104	!
	1105	!-- Define the header
	1106	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1107
	1108	ENDIF
	1109
	1110
	1111	CASE ( 108 )
	1112
	1113	IF ( myid_char == '' ) THEN
[102]	1114	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1115	ELSE
[105]	1116	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1117	myid_char
[1]	1118	ENDIF
	1119	!
	1120	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1121	!-- be opened for extension, if its variables match the actual run.
	1122	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1123
	1124	IF ( netcdf_extend ) THEN
	1125	!
	1126	!-- Open an existing NetCDF file for output
	1127	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
[263]	1128	CALL handle_netcdf_error( 'check_open', 41 )
[1]	1129	!
	1130	!-- Read header information and set all ids. If there is a mismatch
	1131	!-- between the previuos and the actual run, netcdf_extend is returned
	1132	!-- as .FALSE.
	1133	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1134
	1135	!
	1136	!-- Remove the local file, if it can not be extended
	1137	IF ( .NOT. netcdf_extend ) THEN
	1138	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1139	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1140	CALL local_system( 'rm ' // filename )
	1141	ENDIF
	1142
	1143	ENDIF
	1144
	1145	IF ( .NOT. netcdf_extend ) THEN
	1146
	1147	!
	1148	!-- For runs on multiple processors create the subdirectory
	1149	IF ( myid_char /= '' ) THEN
	1150	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1151	THEN ! needs modification in case of non-extendable sets
[102]	1152	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1153	TRIM( coupling_char ) // '/' )
[1]	1154	ENDIF
	1155	#if defined( __parallel )
	1156	!
	1157	!-- Set a barrier in order to allow that all other processors in the
	1158	!-- directory created by PE0 can open their file
	1159	CALL MPI_BARRIER( comm2d, ierr )
	1160	#endif
	1161	ENDIF
	1162
	1163	!
	1164	!-- Create a new NetCDF output file
	1165	IF ( netcdf_64bit ) THEN
	1166	#if defined( __netcdf_64bit )
	1167	nc_stat = NF90_CREATE( filename, &
	1168	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1169	id_set_prt )
	1170	#else
[274]	1171	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	1172	'on this machine'
[247]	1173	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	1174
[1]	1175	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1176	#endif
	1177	ELSE
	1178	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1179	ENDIF
[263]	1180	CALL handle_netcdf_error( 'check_open', 43 )
[1]	1181
	1182	!
	1183	!-- Define the header
	1184	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1185
	1186	ENDIF
	1187
	1188	CASE ( 109 )
	1189	!
[102]	1190	!-- Set filename
	1191	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1192
	1193	!
[1]	1194	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1195	!-- be opened for extension, if its variables match the actual run.
[102]	1196	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1197
	1198	IF ( netcdf_extend ) THEN
	1199	!
	1200	!-- Open an existing NetCDF file for output
[102]	1201	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
[263]	1202	CALL handle_netcdf_error( 'check_open', 393 )
[1]	1203	!
	1204	!-- Read header information and set all ids. If there is a mismatch
	1205	!-- between the previuos and the actual run, netcdf_extend is returned
	1206	!-- as .FALSE.
	1207	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1208
	1209	!
	1210	!-- Remove the local file, if it can not be extended
	1211	IF ( .NOT. netcdf_extend ) THEN
	1212	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1213	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1214	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1215	ENDIF
	1216
	1217	ENDIF
	1218
	1219	IF ( .NOT. netcdf_extend ) THEN
	1220	!
	1221	!-- Create a new NetCDF output file
	1222	IF ( netcdf_64bit ) THEN
	1223	#if defined( __netcdf_64bit )
[102]	1224	nc_stat = NF90_CREATE( filename, &
[1]	1225	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1226	id_set_pts )
	1227	#else
[274]	1228	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	1229	'on this machine'
[247]	1230	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	1231
[102]	1232	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1233	#endif
	1234	ELSE
[102]	1235	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1236	ENDIF
[263]	1237	CALL handle_netcdf_error( 'check_open', 395 )
[1]	1238	!
	1239	!-- Define the header
	1240	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1241
	1242	ENDIF
[410]	1243
	1244	CASE ( 121:160 )
	1245	!
	1246	!-- Set filename depending on unit number
	1247	IF ( file_id <= 140 ) THEN
	1248	mid = file_id - 120
	1249	WRITE ( mask_char,'(I2.2)') mid
	1250	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
	1251	av = 0
	1252	ELSE
	1253	mid = file_id - 140
	1254	WRITE ( mask_char,'(I2.2)') mid
	1255	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
	1256	coupling_char
	1257	av = 1
	1258	ENDIF
	1259	!
	1260	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1261	!-- be opened for extension, if its dimensions and variables match the
	1262	!-- actual run.
	1263	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1264
	1265	IF ( netcdf_extend ) THEN
	1266	!
	1267	!-- Open an existing NetCDF file for output
	1268	#if defined( __netcdf4 )
	1269	nc_stat = NF90_OPEN_PAR( filename, NF90_WRITE, comm2d, &
	1270	MPI_INFO_NULL, id_set_mask(mid,av) )
[1]	1271	#else
[410]	1272	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
	1273	#endif
	1274	CALL handle_netcdf_error( 'check_open', 9998 )
	1275	!
	1276	!-- Read header information and set all ids. If there is a mismatch
	1277	!-- between the previuos and the actual run, netcdf_extend is returned
	1278	!-- as .FALSE.
	1279	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
[1]	1280
[410]	1281	!
	1282	!-- Remove the local file, if it can not be extended
	1283	IF ( .NOT. netcdf_extend ) THEN
	1284	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
	1285	CALL handle_netcdf_error( 'check_open', 9998 )
	1286	CALL local_system('rm ' // TRIM( filename ) )
	1287	ENDIF
[1]	1288
[410]	1289	ENDIF
	1290
	1291	IF ( .NOT. netcdf_extend ) THEN
[1]	1292	!
[410]	1293	!-- Create a new NetCDF output file
	1294	SELECT CASE ( nc_format_mask(mid,av) )
	1295
	1296	CASE ( 1 )
	1297	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
	1298	id_set_mask(mid,av) )
	1299
	1300	CASE ( 2 )
	1301	#if defined( __netcdf_64bit )
	1302	nc_stat = NF90_CREATE( filename, OR( NF90_NOCLOBBER, &
	1303	NF90_64BIT_OFFSET ), id_set_mask(mid,av) )
	1304	#else
	1305	WRITE( message_string, * ) 'NetCDF: no 64-bit ', &
	1306	'offset format allowed on this machine'
	1307	CALL message( 'check_open', 'PA9998', 0, 1, 0, 6, 0 )
	1308	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
	1309	id_set_mask(mid,av) )
	1310	#endif
	1311
	1312	CASE ( 3 )
	1313	#if defined( __netcdf4 )
	1314	nc_stat = NF90_CREATE_PAR( filename, OR( NF90_NOCLOBBER, &
	1315	NF90_NETCDF4 ), comm2d, MPI_INFO_NULL, &
	1316	id_set_mask(mid,av) )
	1317	#else
	1318	WRITE( message_string, * ) 'NetCDF: no NetCDF 4 ', &
	1319	'format allowed on this machine'
	1320	CALL message( 'check_open', 'PA9998', 0, 1, 0, 6, 0 )
	1321	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
	1322	id_set_mask(mid,av) )
	1323	#endif
	1324
	1325	CASE ( 4 )
	1326	#if defined( __netcdf4 )
	1327	nc_stat = NF90_CREATE_PAR( filename, OR( NF90_NOCLOBBER, &
	1328	NF90_CLASSIC_MODEL ), comm2d, &
	1329	MPI_INFO_NULL, id_set_mask(mid,av) )
	1330	#else
	1331	WRITE( message_string, * ) 'NetCDF: no NetCDF 4 (Classic ', &
	1332	'model) format allowed on this machine'
	1333	CALL message( 'check_open', 'PA9998', 0, 1, 0, 6, 0 )
	1334	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
	1335	id_set_mask(mid,av) )
	1336	#endif
	1337
	1338	CASE DEFAULT
	1339	WRITE( message_string, * ) 'illegal NetCDF file format: ', &
	1340	'nc_format_mask(mid=',mid,',av=',av,')=', &
	1341	nc_format_mask(mid,av)
	1342	CALL message( 'check_open', 'PA9998', 2, 2, 0, 6, 0 )
	1343
	1344	END SELECT
	1345	CALL handle_netcdf_error( 'check_open', 9998 )
	1346	!
	1347	!-- Define the header
	1348	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
	1349
	1350	ENDIF
	1351
	1352
	1353	#else
	1354
	1355	CASE ( 101:109, 111:113, 116, 121:160 )
	1356
	1357	!
[1]	1358	!-- Nothing is done in case of missing netcdf support
	1359	RETURN
	1360
	1361	#endif
	1362
	1363	CASE DEFAULT
	1364
[247]	1365	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1366	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1367
	1368	END SELECT
	1369
	1370	!
	1371	!-- Set open flag
	1372	openfile(file_id)%opened = .TRUE.
	1373
	1374	!
	1375	!-- Formats
	1376	3300 FORMAT ('#'/ &
	1377	'coord 1 file=',A,' filetype=unformatted'/ &
	1378	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1379	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1380	'#')
	1381	4000 FORMAT ('# ',A)
	1382	5000 FORMAT ('# ',A/ &
	1383	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1384	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1385	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1386	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1387	8000 FORMAT (A/ &
	1388	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1389	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1390	103('-'))
	1391
	1392	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |