Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 4151

Last change on this file since 4151 was 4128, checked in by gronemeier, 5 years ago
Bugfix for opening the parameter file (unit 11): return error message if file was not found.
Property svn:keywords set to `Id`
File size: 51.1 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[2696]	14	! You should have received a copy of the GNU General Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[3655]	17	! Copyright 1997-2019 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[3705]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 4128 2019-07-30 16:28:58Z suehring $
[4128]	27	! Bugfix for opening the parameter file (unit 11): return error message if file
	28	! was not found.
	29	!
	30	! 4099 2019-07-15 15:29:37Z suehring
[4099]	31	! Bugfix in opening the parameter file (unit 11) in case of ocean precursor
	32	! runs.
	33	!
	34	! 4069 2019-07-01 14:05:51Z Giersch
[4069]	35	! Masked output running index mid has been introduced as a local variable to
	36	! avoid runtime error (Loop variable has been modified) in time_integration
	37	!
	38	! 3967 2019-05-09 16:04:34Z gronemeier
[3967]	39	! Save binary data of virtual measurements within separate folder
	40	!
	41	! 3812 2019-03-25 07:10:12Z gronemeier
[3812]	42	! Open binary surface output data within separate folder
	43	!
	44	! 3705 2019-01-29 19:56:39Z suehring
[3705]	45	! Open binary files for virtual measurements
	46	!
	47	! 3704 2019-01-29 19:51:41Z suehring
[3421]	48	! Open files for surface data
	49	!
	50	! 3399 2018-10-22 20:13:45Z gronemeier
[3241]	51	! unused variables and format statements removed
	52	!
	53	! 3159 2018-07-20 11:20:01Z sward
[3159]	54	! Added multi agent system
	55	!
	56	! 3045 2018-05-28 07:55:41Z Giersch
[3045]	57	! Output case 108 disabled
	58	!
	59	! 2964 2018-04-12 16:04:03Z Giersch
[2964]	60	! Error message moved to radiation_model_mod
	61	!
	62	! 2957 2018-04-11 08:48:06Z Giersch
[2957]	63	! Error message has been corrected in case of writing sky view factors
	64	!
	65	! 2906 2018-03-19 08:56:40Z Giersch
[2906]	66	! CASE 88 and 89 has been added for the input/output of sky view factors
	67	!
	68	! 2718 2018-01-02 08:49:38Z maronga
[2716]	69	! Corrected "Former revisions" section
	70	!
	71	! 2696 2017-12-14 17:12:51Z kanani
	72	! Change in file header (GPL part)
	73	!
	74	! 2669 2017-12-06 16:03:27Z raasch
[2669]	75	! file name extension for masked data files is changed to "_M##" and is now
	76	! appended at the end of the filename,
	77	! file ids not used any more have been removed
	78	!
	79	! 2516 2017-10-04 11:03:04Z suehring
[2516]	80	! Remove tabs
	81	!
	82	! 2514 2017-10-04 09:52:37Z suehring
[2512]	83	! upper bounds of cross section and 3d output changed from nx+1,ny+1 to nx,ny
	84	! no output of ghost layer data
	85	! iso2d-related parts removed
	86	!
	87	! 2300 2017-06-29 13:31:14Z raasch
[2300]	88	! -host
	89	!
	90	! 2298 2017-06-29 09:28:18Z raasch
[2298]	91	! -return_addres, return_username, avs_coor_file_..., avs_data_file_...,
	92	! cross_ts_numbers, cross_ts_number_count
[1321]	93	!
[2298]	94	! 2101 2017-01-05 16:42:31Z suehring
	95	!
[2064]	96	! 2063 2016-11-10 17:14:35Z raasch
	97	! bugfix: opening of PROGRESS file moved out of the NetCDF block
	98	!
[2041]	99	! 2040 2016-10-26 16:58:09Z gronemeier
[2040]	100	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
	101	!
[2001]	102	! 2000 2016-08-20 18:09:15Z knoop
	103	! Forced header and separation lines into 80 columns
	104	!
[1989]	105	! 1988 2016-08-10 14:49:06Z gronemeier
	106	! informative message added if files cannot be opened in newly created directory
	107	!
[1987]	108	! 1986 2016-08-10 14:07:17Z gronemeier
	109	! Bugfix: check if output can be opened in newly created directory. If not
	110	! wait one second and try again.
	111	!
[1975]	112	! 1974 2016-07-26 08:43:25Z gronemeier
	113	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	114	! in case of parallel I/O
	115	!
[1958]	116	! 1957 2016-07-07 10:43:48Z suehring
	117	! flight module added
	118	!
[1805]	119	! 1804 2016-04-05 16:30:18Z maronga
	120	! Removed code for parameter file check (__check)
	121	!
[1784]	122	! 1783 2016-03-06 18:36:17Z raasch
	123	! name change of netcdf routines and module + related changes
	124	!
[1780]	125	! 1779 2016-03-03 08:01:28Z raasch
	126	! coupling_char is trimmed at every place it occurs, because it can have
	127	! different length now
	128	!
[1746]	129	! 1745 2016-02-05 13:06:51Z gronemeier
	130	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	131	!
[1683]	132	! 1682 2015-10-07 23:56:08Z knoop
	133	! Code annotations made doxygen readable
	134	!
[1552]	135	! 1551 2015-03-03 14:18:16Z maronga
	136	! Removed redundant output for combine_plot_fields
	137	!
[1469]	138	! 1468 2014-09-24 14:06:57Z maronga
	139	! Adapted for use on up to 6-digit processor cores
	140	! Added file unit 117 (PROGRESS)
	141	!
[1360]	142	! 1359 2014-04-11 17:15:14Z hoffmann
	143	! Format of particle exchange statistics extended to reasonable numbers of
	144	! particles.
	145	!
[1354]	146	! 1353 2014-04-08 15:21:23Z heinze
	147	! REAL constants provided with KIND-attribute,
	148	! declaration for unused variables xkoor, ykoor, zkoor removed
	149	!
[1329]	150	! 1327 2014-03-21 11:00:16Z raasch
	151	! parts concerning iso2d and avs output removed
	152	!
[1321]	153	! 1320 2014-03-20 08:40:49Z raasch
[1320]	154	! ONLY-attribute added to USE-statements,
	155	! kind-parameters added to all INTEGER and REAL declaration statements,
	156	! kinds are defined in new module kinds,
	157	! old module precision_kind is removed,
	158	! revision history before 2012 removed,
	159	! comment fields (!:) to be used for variable explanations added to
	160	! all variable declaration statements
[1]	161	!
[1107]	162	! 1106 2013-03-04 05:31:38Z raasch
	163	! array_kind renamed precision_kind
	164	!
[1093]	165	! 1092 2013-02-02 11:24:22Z raasch
	166	! unused variables removed
	167	!
[1037]	168	! 1036 2012-10-22 13:43:42Z raasch
	169	! code put under GPL (PALM 3.9)
	170	!
[1035]	171	! 1031 2012-10-19 14:35:30Z raasch
	172	! netCDF4 without parallel file support implemented,
	173	! opening of netCDF files are done by new routines create_netcdf_file and
	174	! open_write_netcdf_file
	175	!
[965]	176	! 964 2012-07-26 09:14:24Z raasch
	177	! old profil-units (40:49) removed,
	178	! append feature removed from unit 14
	179	!
[850]	180	! 849 2012-03-15 10:35:09Z raasch
	181	! comment changed
	182	!
[810]	183	! 809 2012-01-30 13:32:58Z maronga
	184	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	185	!
[808]	186	! 807 2012-01-25 11:53:51Z maronga
	187	! New cpp directive "__check" implemented which is used by check_namelist_files
	188	!
[1]	189	! Revision 1.1 1997/08/11 06:10:55 raasch
	190	! Initial revision
	191	!
	192	!
	193	! Description:
	194	! ------------
[1682]	195	!> Check if file unit is open. If not, open file and, if necessary, write a
	196	!> header or start other initializing actions, respectively.
[1]	197	!------------------------------------------------------------------------------!
[1682]	198	SUBROUTINE check_open( file_id )
	199
[1]	200
[1320]	201	USE control_parameters, &
[2964]	202	ONLY: coupling_char, data_output_2d_on_each_pe, &
[4069]	203	max_masks, message_string, nz_do3d, openfile, &
[3241]	204	run_description_header
[1320]	205
	206	USE indices, &
[3241]	207	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nys, nz, nzb, nzt
[1320]	208
	209	USE kinds
	210
[1783]	211	#if defined( __netcdf )
	212	USE NETCDF
	213	#endif
[1320]	214
[1783]	215	USE netcdf_interface, &
[3241]	216	ONLY: id_set_agt, id_set_fl, id_set_mask, id_set_pr, &
[3159]	217	id_set_pts, id_set_sp, id_set_ts, id_set_xy, id_set_xz, &
	218	id_set_yz, id_set_3d, nc_stat, netcdf_create_file, &
	219	netcdf_data_format, netcdf_define_header, netcdf_handle_error, &
	220	netcdf_open_write_file
[1783]	221
[1320]	222	USE particle_attributes, &
	223	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	224	particle_groups
	225
[1]	226	USE pegrid
	227
[1986]	228	USE posix_calls_from_fortran, &
	229	ONLY: fortran_sleep
	230
[1320]	231
[1]	232	IMPLICIT NONE
	233
[2669]	234	CHARACTER (LEN=4) :: mask_char !<
[1682]	235	CHARACTER (LEN=30) :: filename !<
	236	CHARACTER (LEN=80) :: rtext !<
[1]	237
[1682]	238	INTEGER(iwp) :: av !<
	239	INTEGER(iwp) :: file_id !<
[1986]	240	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[4069]	241	INTEGER(iwp) :: mid !< masked output running index
[1320]	242
[4099]	243	LOGICAL :: file_exist !< file check
[2512]	244	LOGICAL :: netcdf_extend !<
[1]	245
	246	!
	247	!-- Immediate return if file already open
	248	IF ( openfile(file_id)%opened ) RETURN
	249
	250	!
	251	!-- Only certain files are allowed to be re-opened
	252	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	253	!-- has not been checked so far, if it works!
	254	IF ( openfile(file_id)%opened_before ) THEN
	255	SELECT CASE ( file_id )
[2669]	256	CASE ( 13, 14, 21, 22, 23, 80, 85, 117 )
[1]	257	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	258	message_string = 're-open of unit ' // &
[274]	259	'14 is not verified. Please check results!'
[247]	260	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	261	ENDIF
[143]	262
[1]	263	CASE DEFAULT
[1320]	264	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	265	' is not allowed'
[247]	266	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	267
[1]	268	RETURN
[143]	269
[1]	270	END SELECT
	271	ENDIF
	272
	273	!
	274	!-- Check if file may be opened on the relevant PE
	275	SELECT CASE ( file_id )
	276
[2669]	277	CASE ( 15, 16, 17, 18, 19, 50:59, 104:105, 107, 109, 117 )
[2514]	278
[493]	279	IF ( myid /= 0 ) THEN
[1320]	280	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	281	' not allowed for PE ',myid
	282	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	283	ENDIF
	284
[564]	285	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	286
[1031]	287	IF ( netcdf_data_format < 5 ) THEN
[247]	288
[410]	289	IF ( myid /= 0 ) THEN
[1320]	290	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	291	' not allowed for PE ',myid
	292	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	293	ENDIF
[2514]	294
[493]	295	ENDIF
[1]	296
	297	CASE ( 21, 22, 23 )
	298
	299	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	300	IF ( myid /= 0 ) THEN
[1320]	301	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	302	' not allowed for PE ',myid
[277]	303	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	304	END IF
[1]	305	ENDIF
	306
[2669]	307	CASE ( 90:99 )
[1]	308
	309	!
	310	!-- File-ids that are used temporarily in other routines
[1320]	311	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	312	' is not allowed since it is used otherwise'
[247]	313	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	314
[1]	315	END SELECT
	316
	317	!
	318	!-- Open relevant files
	319	SELECT CASE ( file_id )
	320
	321	CASE ( 11 )
[4099]	322	!
	323	!-- Read the parameter file. Therefore, inquire whether the file exist or
	324	!-- not. This is required for the ocean-atmoshere coupling. For an ocean
	325	!-- precursor run palmrun provides a PARIN_O file instead of a PARIN
	326	!-- file. Actually this should be considered in coupling_char, however,
	327	!-- in pmc_init the parameter file is already opened to read the
	328	!-- nesting parameters and decide whether it is a nested run or not,
	329	!-- but coupling_char is still not set at that moment (must be set after
	330	!- the nesting setup is read).
	331	!-- This, however, leads to the situation that for ocean
	332	!-- precursor runs PARIN is not available and the run crashes. Thus,
	333	!-- if the file is not there, PARIN_O will be read. An ocean precursor
	334	!-- run will be the only situation where this can happen.
	335	INQUIRE( FILE = 'PARIN' // TRIM( coupling_char ), &
	336	EXIST = file_exist )
	337
	338	IF ( file_exist ) THEN
	339	filename = 'PARIN' // TRIM( coupling_char )
	340	ELSE
	341	filename = 'PARIN_O'
	342	ENDIF
[1]	343
[4128]	344	OPEN ( 11, FILE= TRIM( filename ), FORM='FORMATTED', STATUS='OLD', IOSTAT=ioerr )
[1]	345
[4128]	346	IF ( ioerr /= 0 ) THEN
	347	message_string = 'namelist file "PARIN' // TRIM( coupling_char ) // &
	348	'" or "PARIN_O" not found!' // &
	349	'&Please have a look at the online description of the ' // &
	350	'error message for further hints.'
	351	CALL message( 'check_open', 'PA0661', 3, 2, 0, 6, 1 )
	352	ENDIF
	353
[1]	354	CASE ( 13 )
	355
	356	IF ( myid_char == '' ) THEN
[1779]	357	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	358	FORM='UNFORMATTED', STATUS='OLD' )
[1]	359	ELSE
[143]	360	!
[1468]	361	!-- First opening of unit 13 openes file _000000 on all PEs because
	362	!-- only this file contains the global variables
[143]	363	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	364	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	365	FORM='UNFORMATTED', STATUS='OLD' )
	366	ELSE
[1779]	367	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	368	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	369	ENDIF
[1]	370	ENDIF
	371
	372	CASE ( 14 )
	373
	374	IF ( myid_char == '' ) THEN
[1779]	375	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	376	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	377	ELSE
	378	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	379	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	380	ENDIF
[1804]	381	#if defined( __parallel )
[1]	382	!
	383	!-- Set a barrier in order to allow that all other processors in the
	384	!-- directory created by PE0 can open their file
	385	CALL MPI_BARRIER( comm2d, ierr )
	386	#endif
[1986]	387	ioerr = 1
	388	DO WHILE ( ioerr /= 0 )
	389	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	390	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	391	IF ( ioerr /= 0 ) THEN
	392	WRITE( 9, * ) '*** could not open "BINOUT'// &
	393	TRIM(coupling_char)//'/'//myid_char// &
	394	'"! Trying again in 1 sec.'
	395	CALL fortran_sleep( 1 )
	396	ENDIF
[1986]	397	ENDDO
	398
[1]	399	ENDIF
	400
	401	CASE ( 15 )
	402
[1779]	403	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	404	FORM='FORMATTED' )
[1]	405
	406	CASE ( 16 )
	407
[1779]	408	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	409	FORM='FORMATTED' )
[1]	410
	411	CASE ( 17 )
	412
[1779]	413	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	414	FORM='FORMATTED' )
[1]	415
	416	CASE ( 18 )
	417
[1779]	418	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	419	FORM='FORMATTED' )
[1]	420
	421	CASE ( 19 )
	422
[1779]	423	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	424
	425	CASE ( 20 )
	426
	427	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	428	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	429	ENDIF
	430	IF ( myid_char == '' ) THEN
[1779]	431	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	432	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	433	ELSE
[1804]	434	#if defined( __parallel )
[1]	435	!
	436	!-- Set a barrier in order to allow that all other processors in the
	437	!-- directory created by PE0 can open their file
	438	CALL MPI_BARRIER( comm2d, ierr )
	439	#endif
[1986]	440	ioerr = 1
	441	DO WHILE ( ioerr /= 0 )
	442	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	443	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	444	IOSTAT=ioerr )
[1988]	445	IF ( ioerr /= 0 ) THEN
	446	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	447	TRIM( coupling_char )//'/'//myid_char// &
	448	'"! Trying again in 1 sec.'
	449	CALL fortran_sleep( 1 )
	450	ENDIF
[1986]	451	ENDDO
	452
[1]	453	ENDIF
	454
	455	CASE ( 21 )
	456
	457	IF ( data_output_2d_on_each_pe ) THEN
[1320]	458	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	459	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	460	ELSE
[1779]	461	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	462	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	463	ENDIF
	464
	465	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	466	!
[2512]	467	!-- Write index bounds of total domain for combine_plot_fields
[1]	468	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	469	WRITE (21) 0, nx, 0, ny
[1]	470	ENDIF
	471
	472	ENDIF
	473
	474	CASE ( 22 )
	475
	476	IF ( data_output_2d_on_each_pe ) THEN
[1320]	477	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	478	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	479	ELSE
[1779]	480	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	481	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	482	ENDIF
	483
	484	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	485	!
[2512]	486	!-- Write index bounds of total domain for combine_plot_fields
[1]	487	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	488	WRITE (22) 0, nx, 0, nz+1 ! output part
[1]	489	ENDIF
	490
	491	ENDIF
	492
	493	CASE ( 23 )
	494
	495	IF ( data_output_2d_on_each_pe ) THEN
[1320]	496	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	497	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	498	ELSE
[1779]	499	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	500	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	501	ENDIF
	502
	503	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	504	!
[2512]	505	!-- Write index bounds of total domain for combine_plot_fields
[1]	506	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	507	WRITE (23) 0, ny, 0, nz+1 ! output part
[1]	508	ENDIF
	509
	510	ENDIF
[3421]	511
	512	CASE ( 25 )
	513	!
	514	!-- Binary files for surface data
[3812]	515	! OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM( coupling_char )// &
	516	! myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
[1]	517
[3812]	518	IF ( myid_char == '' ) THEN
	519	OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM( coupling_char )// &
	520	myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
	521	ELSE
	522	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	523	CALL local_system( 'mkdir SURFACE_DATA_BIN' // &
	524	TRIM( coupling_char ) )
	525	ENDIF
	526	#if defined( __parallel )
	527	!
	528	!-- Set a barrier in order to allow that all other processors in the
	529	!-- directory created by PE0 can open their file
	530	CALL MPI_BARRIER( comm2d, ierr )
	531	#endif
	532	ioerr = 1
	533	DO WHILE ( ioerr /= 0 )
	534	OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM(coupling_char)// &
	535	'/'//myid_char, &
	536	FORM='UNFORMATTED', IOSTAT=ioerr )
	537	IF ( ioerr /= 0 ) THEN
	538	WRITE( 9, * ) '*** could not open "SURFACE_DATA_BIN'// &
	539	TRIM(coupling_char)//'/'//myid_char// &
	540	'"! Trying again in 1 sec.'
	541	CALL fortran_sleep( 1 )
	542	ENDIF
	543	ENDDO
	544
	545	ENDIF
	546
[3421]	547	CASE ( 26 )
	548	!
	549	!-- Binary files for averaged surface data
[3812]	550	! OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM( coupling_char )//myid_char, &
	551	! FORM='UNFORMATTED', POSITION='APPEND' )
	552
	553	IF ( myid_char == '' ) THEN
	554	OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM( coupling_char )// &
	555	myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
	556	ELSE
	557	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	558	CALL local_system( 'mkdir SURFACE_DATA_AV_BIN' // &
	559	TRIM( coupling_char ) )
	560	ENDIF
	561	#if defined( __parallel )
	562	!
	563	!-- Set a barrier in order to allow that all other processors in the
	564	!-- directory created by PE0 can open their file
	565	CALL MPI_BARRIER( comm2d, ierr )
	566	#endif
	567	ioerr = 1
	568	DO WHILE ( ioerr /= 0 )
	569	OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM(coupling_char)// &
	570	'/'//myid_char, &
	571	FORM='UNFORMATTED', IOSTAT=ioerr )
	572	IF ( ioerr /= 0 ) THEN
	573	WRITE( 9, * ) '*** could not open "SURFACE_DATA_AV_BIN'// &
	574	TRIM(coupling_char)//'/'//myid_char// &
	575	'"! Trying again in 1 sec.'
	576	CALL fortran_sleep( 1 )
	577	ENDIF
	578	ENDDO
	579
	580	ENDIF
	581
[3704]	582	CASE ( 27 )
	583	!
	584	!-- Binary files for virtual measurement data
[3967]	585	IF ( myid_char == '' ) THEN
	586	OPEN ( 27, FILE='VIRTUAL_MEAS_BIN'//TRIM( coupling_char )// &
	587	myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
	588	ELSE
[3421]	589
[3967]	590	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	591	CALL local_system( 'mkdir VIRTUAL_MEAS_BIN' // &
	592	TRIM( coupling_char ) )
	593	ENDIF
	594	#if defined( __parallel )
	595	!
	596	!-- Set a barrier in order to allow that all other processors in the
	597	!-- directory created by PE0 can open their file
	598	CALL MPI_BARRIER( comm2d, ierr )
	599	#endif
	600	ioerr = 1
	601	DO WHILE ( ioerr /= 0 )
	602	OPEN ( 27, FILE='VIRTUAL_MEAS_BIN'//TRIM(coupling_char)// &
	603	'/'//myid_char, &
	604	FORM='UNFORMATTED', IOSTAT=ioerr )
	605	IF ( ioerr /= 0 ) THEN
	606	WRITE( 9, * ) '*** could not open "VIRTUAL_MEAS_BIN'// &
	607	TRIM(coupling_char)//'/'//myid_char// &
	608	'"! Trying again in 1 sec.'
	609	CALL fortran_sleep( 1 )
	610	ENDIF
	611	ENDDO
	612
	613	ENDIF
	614
[1]	615	CASE ( 30 )
	616
[1320]	617	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	618	FORM='UNFORMATTED' )
[1]	619	!
[2512]	620	!-- Specifications for combine_plot_fields
[1]	621	IF ( myid == 0 ) THEN
	622	#if defined( __parallel )
[2512]	623	WRITE ( 30 ) 0, nx, 0, ny, 0, nz_do3d
[1]	624	#endif
	625	ENDIF
	626
	627	CASE ( 80 )
	628
	629	IF ( myid_char == '' ) THEN
[105]	630	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	631	FORM='FORMATTED', POSITION='APPEND' )
[1]	632	ELSE
	633	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	634	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	635	TRIM( coupling_char ) )
[1]	636	ENDIF
[1804]	637	#if defined( __parallel )
[1]	638	!
	639	!-- Set a barrier in order to allow that thereafter all other
	640	!-- processors in the directory created by PE0 can open their file.
	641	!-- WARNING: The following barrier will lead to hanging jobs, if
	642	!-- check_open is first called from routine
	643	!-- allocate_prt_memory!
	644	IF ( .NOT. openfile(80)%opened_before ) THEN
	645	CALL MPI_BARRIER( comm2d, ierr )
	646	ENDIF
	647	#endif
[1320]	648	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	649	myid_char, &
[102]	650	FORM='FORMATTED', POSITION='APPEND' )
[1]	651	ENDIF
	652
	653	IF ( .NOT. openfile(80)%opened_before ) THEN
	654	WRITE ( 80, 8000 ) TRIM( run_description_header )
	655	ENDIF
	656
	657	CASE ( 85 )
	658
	659	IF ( myid_char == '' ) THEN
[1320]	660	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	661	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	662	ELSE
	663	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	664	CALL local_system( 'mkdir PARTICLE_DATA' // &
	665	TRIM( coupling_char ) )
[1]	666	ENDIF
[1804]	667	#if defined( __parallel )
[1]	668	!
	669	!-- Set a barrier in order to allow that thereafter all other
	670	!-- processors in the directory created by PE0 can open their file
	671	CALL MPI_BARRIER( comm2d, ierr )
	672	#endif
[1986]	673	ioerr = 1
	674	DO WHILE ( ioerr /= 0 )
	675	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	676	myid_char, &
	677	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	678	IF ( ioerr /= 0 ) THEN
[2906]	679	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	680	TRIM( coupling_char )//'/'//myid_char// &
[1988]	681	'"! Trying again in 1 sec.'
	682	CALL fortran_sleep( 1 )
	683	ENDIF
[1986]	684	ENDDO
	685
[1]	686	ENDIF
	687
	688	IF ( .NOT. openfile(85)%opened_before ) THEN
	689	WRITE ( 85 ) run_description_header
	690	!
	691	!-- Attention: change version number whenever the output format on
[849]	692	!-- unit 85 is changed (see also in routine
	693	!-- lpm_data_output_particles)
[1359]	694	rtext = 'data format version 3.1'
[1]	695	WRITE ( 85 ) rtext
[1320]	696	WRITE ( 85 ) number_of_particle_groups, &
[1]	697	max_number_of_particle_groups
	698	WRITE ( 85 ) particle_groups
[1359]	699	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	700	ENDIF
	701
[2063]	702	!
[2906]	703	!-- File where sky-view factors and further required data is stored will be
	704	!-- read
	705	CASE ( 88 )
	706
	707	IF ( myid_char == '' ) THEN
	708	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//myid_char, &
	709	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	710	ELSE
	711
	712	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//'/'//myid_char, &
	713	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	714	ENDIF
	715
	716	!
	717	!-- File where sky-view factors and further required data is stored will be
	718	!-- created
	719	CASE ( 89 )
	720
	721	IF ( myid_char == '' ) THEN
	722	OPEN ( 89, FILE='SVFOUT'//TRIM( coupling_char )//myid_char, &
	723	FORM='UNFORMATTED', STATUS='NEW' )
	724	ELSE
	725	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	726	CALL local_system( 'mkdir SVFOUT' // TRIM( coupling_char ) )
	727	ENDIF
	728	#if defined( __parallel )
	729	!
	730	!-- Set a barrier in order to allow that all other processors in the
	731	!-- directory created by PE0 can open their file
	732	CALL MPI_BARRIER( comm2d, ierr )
	733	#endif
	734	ioerr = 1
	735	DO WHILE ( ioerr /= 0 )
	736	OPEN ( 89, FILE='SVFOUT'//TRIM(coupling_char)//'/'//myid_char, &
	737	FORM='UNFORMATTED', STATUS='NEW', IOSTAT=ioerr )
	738	IF ( ioerr /= 0 ) THEN
[2957]	739	WRITE( 9, * ) '*** could not open "SVFOUT'// &
	740	TRIM(coupling_char)//'/'//myid_char// &
[2906]	741	'"! Trying again in 1 sec.'
	742	CALL fortran_sleep( 1 )
	743	ENDIF
	744	ENDDO
	745
	746	ENDIF
	747
	748	!
[2063]	749	!-- Progress file that is used by the PALM watchdog
	750	CASE ( 117 )
	751
	752	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	753	STATUS='REPLACE', FORM='FORMATTED' )
	754
[1]	755	#if defined( __netcdf )
	756	CASE ( 101, 111 )
	757	!
	758	!-- Set filename depending on unit number
	759	IF ( file_id == 101 ) THEN
[1779]	760	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	761	av = 0
	762	ELSE
[1779]	763	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	764	av = 1
	765	ENDIF
	766	!
[1031]	767	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	768	!-- be opened for extension, if its dimensions and variables match the
	769	!-- actual run.
	770	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	771	IF ( netcdf_extend ) THEN
	772	!
[1031]	773	!-- Open an existing netCDF file for output
[1783]	774	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	775	!
	776	!-- Read header information and set all ids. If there is a mismatch
	777	!-- between the previuos and the actual run, netcdf_extend is returned
	778	!-- as .FALSE.
[1783]	779	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	780
	781	!
	782	!-- Remove the local file, if it can not be extended
	783	IF ( .NOT. netcdf_extend ) THEN
	784	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	785	CALL netcdf_handle_error( 'check_open', 21 )
[493]	786	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	787	#if defined( __parallel )
[1745]	788	!
	789	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	790	!-- before any other processor tries to open a new file.
	791	!-- Barrier is only needed in case of parallel I/O
	792	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	793	#endif
[1]	794	ENDIF
	795
[1745]	796	ENDIF
[1]	797
	798	IF ( .NOT. netcdf_extend ) THEN
	799	!
[1031]	800	!-- Create a new netCDF output file with requested netCDF format
[1783]	801	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	802
	803	!
[1]	804	!-- Define the header
[1783]	805	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	806
[493]	807	!
[1031]	808	!-- In case of parallel netCDF output, create flag file which tells
[493]	809	!-- combine_plot_fields that nothing is to do.
[1031]	810	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	811	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	812	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	813	CLOSE( 99 )
	814	ENDIF
	815
[1]	816	ENDIF
	817
	818	CASE ( 102, 112 )
	819	!
	820	!-- Set filename depending on unit number
	821	IF ( file_id == 102 ) THEN
[1779]	822	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	823	av = 0
	824	ELSE
[1779]	825	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	826	av = 1
	827	ENDIF
	828	!
[1031]	829	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	830	!-- be opened for extension, if its dimensions and variables match the
	831	!-- actual run.
	832	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	833
	834	IF ( netcdf_extend ) THEN
	835	!
[1031]	836	!-- Open an existing netCDF file for output
[1783]	837	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	838	!
	839	!-- Read header information and set all ids. If there is a mismatch
	840	!-- between the previuos and the actual run, netcdf_extend is returned
	841	!-- as .FALSE.
[1783]	842	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	843
	844	!
	845	!-- Remove the local file, if it can not be extended
	846	IF ( .NOT. netcdf_extend ) THEN
	847	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	848	CALL netcdf_handle_error( 'check_open', 24 )
[493]	849	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	850	#if defined( __parallel )
[1745]	851	!
	852	!-- Set a barrier in order to assure that PE0 deleted the old file
	853	!-- before any other processor tries to open a new file
[1974]	854	!-- Barrier is only needed in case of parallel I/O
	855	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	856	#endif
[1]	857	ENDIF
	858
[1745]	859	ENDIF
[1]	860
	861	IF ( .NOT. netcdf_extend ) THEN
	862	!
[1031]	863	!-- Create a new netCDF output file with requested netCDF format
[1783]	864	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	865
	866	!
[1]	867	!-- Define the header
[1783]	868	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	869
[493]	870	!
[1031]	871	!-- In case of parallel netCDF output, create flag file which tells
[493]	872	!-- combine_plot_fields that nothing is to do.
[1031]	873	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	874	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	875	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	876	CLOSE( 99 )
	877	ENDIF
	878
[1]	879	ENDIF
	880
	881	CASE ( 103, 113 )
	882	!
	883	!-- Set filename depending on unit number
	884	IF ( file_id == 103 ) THEN
[1779]	885	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	886	av = 0
	887	ELSE
[1779]	888	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	889	av = 1
	890	ENDIF
	891	!
[1031]	892	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	893	!-- be opened for extension, if its dimensions and variables match the
	894	!-- actual run.
	895	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	896
	897	IF ( netcdf_extend ) THEN
	898	!
[1031]	899	!-- Open an existing netCDF file for output
[1783]	900	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	901	!
	902	!-- Read header information and set all ids. If there is a mismatch
	903	!-- between the previuos and the actual run, netcdf_extend is returned
	904	!-- as .FALSE.
[1783]	905	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	906
	907	!
	908	!-- Remove the local file, if it can not be extended
	909	IF ( .NOT. netcdf_extend ) THEN
	910	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	911	CALL netcdf_handle_error( 'check_open', 27 )
[493]	912	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	913	#if defined( __parallel )
[1745]	914	!
	915	!-- Set a barrier in order to assure that PE0 deleted the old file
	916	!-- before any other processor tries to open a new file
[1974]	917	!-- Barrier is only needed in case of parallel I/O
	918	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	919	#endif
[1]	920	ENDIF
	921
[1745]	922	ENDIF
[1]	923
	924	IF ( .NOT. netcdf_extend ) THEN
	925	!
[1031]	926	!-- Create a new netCDF output file with requested netCDF format
[1783]	927	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	928
	929	!
[1]	930	!-- Define the header
[1783]	931	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	932
[493]	933	!
[1031]	934	!-- In case of parallel netCDF output, create flag file which tells
[493]	935	!-- combine_plot_fields that nothing is to do.
[1031]	936	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	937	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	938	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	939	CLOSE( 99 )
	940	ENDIF
	941
[1]	942	ENDIF
	943
	944	CASE ( 104 )
	945	!
[102]	946	!-- Set filename
[1779]	947	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	948
	949	!
[1031]	950	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	951	!-- be opened for extension, if its variables match the actual run.
[102]	952	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	953
	954	IF ( netcdf_extend ) THEN
	955	!
[1031]	956	!-- Open an existing netCDF file for output
[1783]	957	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	958	!
	959	!-- Read header information and set all ids. If there is a mismatch
	960	!-- between the previuos and the actual run, netcdf_extend is returned
	961	!-- as .FALSE.
[1783]	962	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	963
	964	!
	965	!-- Remove the local file, if it can not be extended
	966	IF ( .NOT. netcdf_extend ) THEN
	967	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	968	CALL netcdf_handle_error( 'check_open', 30 )
[102]	969	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	970	ENDIF
	971
	972	ENDIF
	973
	974	IF ( .NOT. netcdf_extend ) THEN
	975	!
[1031]	976	!-- Create a new netCDF output file with requested netCDF format
[1783]	977	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	978	!
	979	!-- Define the header
[1783]	980	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	981
	982	ENDIF
	983
	984	CASE ( 105 )
	985	!
[102]	986	!-- Set filename
[1779]	987	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	988
	989	!
[1031]	990	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	991	!-- be opened for extension, if its variables match the actual run.
[102]	992	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	993
	994	IF ( netcdf_extend ) THEN
	995	!
[1031]	996	!-- Open an existing netCDF file for output
[1783]	997	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	998	!
	999	!-- Read header information and set all ids. If there is a mismatch
	1000	!-- between the previuos and the actual run, netcdf_extend is returned
	1001	!-- as .FALSE.
[1783]	1002	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	1003
	1004	!
	1005	!-- Remove the local file, if it can not be extended
	1006	IF ( .NOT. netcdf_extend ) THEN
	1007	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	1008	CALL netcdf_handle_error( 'check_open', 33 )
[102]	1009	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1010	ENDIF
	1011
	1012	ENDIF
	1013
	1014	IF ( .NOT. netcdf_extend ) THEN
	1015	!
[1031]	1016	!-- Create a new netCDF output file with requested netCDF format
[1783]	1017	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	1018	!
	1019	!-- Define the header
[1783]	1020	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	1021
	1022	ENDIF
	1023
	1024
	1025	CASE ( 106, 116 )
	1026	!
	1027	!-- Set filename depending on unit number
	1028	IF ( file_id == 106 ) THEN
[1779]	1029	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	1030	av = 0
	1031	ELSE
[1779]	1032	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	1033	av = 1
	1034	ENDIF
	1035	!
[1031]	1036	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	1037	!-- be opened for extension, if its dimensions and variables match the
	1038	!-- actual run.
	1039	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1040	IF ( netcdf_extend ) THEN
	1041	!
[1031]	1042	!-- Open an existing netCDF file for output
[1783]	1043	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	1044	!
	1045	!-- Read header information and set all ids. If there is a mismatch
	1046	!-- between the previuos and the actual run, netcdf_extend is returned
	1047	!-- as .FALSE.
[1783]	1048	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	1049
	1050	!
	1051	!-- Remove the local file, if it can not be extended
	1052	IF ( .NOT. netcdf_extend ) THEN
	1053	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	1054	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	1055	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	1056	#if defined( __parallel )
[1745]	1057	!
	1058	!-- Set a barrier in order to assure that PE0 deleted the old file
	1059	!-- before any other processor tries to open a new file
[1974]	1060	!-- Barrier is only needed in case of parallel I/O
	1061	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	1062	#endif
[1]	1063	ENDIF
	1064
[1745]	1065	ENDIF
[1]	1066
	1067	IF ( .NOT. netcdf_extend ) THEN
	1068	!
[1031]	1069	!-- Create a new netCDF output file with requested netCDF format
[1783]	1070	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	1071
	1072	!
[1]	1073	!-- Define the header
[1783]	1074	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	1075
[493]	1076	!
[1031]	1077	!-- In case of parallel netCDF output, create flag file which tells
[493]	1078	!-- combine_plot_fields that nothing is to do.
[1031]	1079	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	1080	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1081	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1082	CLOSE( 99 )
	1083	ENDIF
	1084
[1]	1085	ENDIF
	1086
	1087
	1088	CASE ( 107 )
	1089	!
[102]	1090	!-- Set filename
[1779]	1091	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	1092
	1093	!
[1031]	1094	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1095	!-- be opened for extension, if its variables match the actual run.
[102]	1096	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1097
	1098	IF ( netcdf_extend ) THEN
	1099	!
[1031]	1100	!-- Open an existing netCDF file for output
[1783]	1101	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	1102
[1]	1103	!
	1104	!-- Read header information and set all ids. If there is a mismatch
	1105	!-- between the previuos and the actual run, netcdf_extend is returned
	1106	!-- as .FALSE.
[1783]	1107	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1108
	1109	!
	1110	!-- Remove the local file, if it can not be extended
	1111	IF ( .NOT. netcdf_extend ) THEN
	1112	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	1113	CALL netcdf_handle_error( 'check_open', 39 )
[102]	1114	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1115	ENDIF
	1116
	1117	ENDIF
	1118
	1119	IF ( .NOT. netcdf_extend ) THEN
	1120	!
[1031]	1121	!-- Create a new netCDF output file with requested netCDF format
[1783]	1122	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	1123	!
	1124	!-- Define the header
[1783]	1125	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1126
	1127	ENDIF
	1128
[3045]	1129	!
	1130	!-- Currently disabled
	1131	! CASE ( 108 )
[1]	1132
[3045]	1133	! IF ( myid_char == '' ) THEN
	1134	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
	1135	! ELSE
	1136	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1137	! myid_char
	1138	! ENDIF
[1]	1139	!
[1031]	1140	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1141	!-- be opened for extension, if its variables match the actual run.
[3045]	1142	! INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1143
[3045]	1144	! IF ( netcdf_extend ) THEN
[1]	1145	!
[1031]	1146	!-- Open an existing netCDF file for output
[3045]	1147	! CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	1148	!
	1149	!-- Read header information and set all ids. If there is a mismatch
	1150	!-- between the previuos and the actual run, netcdf_extend is returned
	1151	!-- as .FALSE.
[3045]	1152	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1153
	1154	!
	1155	!-- Remove the local file, if it can not be extended
[3045]	1156	! IF ( .NOT. netcdf_extend ) THEN
	1157	! nc_stat = NF90_CLOSE( id_set_prt )
	1158	! CALL netcdf_handle_error( 'check_open', 42 )
	1159	! CALL local_system( 'rm ' // TRIM( filename ) )
	1160	! ENDIF
[1]	1161
[3045]	1162	! ENDIF
[1]	1163
[3045]	1164	! IF ( .NOT. netcdf_extend ) THEN
[1]	1165
	1166	!
	1167	!-- For runs on multiple processors create the subdirectory
[3045]	1168	! IF ( myid_char /= '' ) THEN
	1169	! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1170	! THEN ! needs modification in case of non-extendable sets
	1171	! CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
	1172	! TRIM( coupling_char ) // '/' )
	1173	! ENDIF
[1804]	1174	#if defined( __parallel )
[807]	1175	!
[1]	1176	!-- Set a barrier in order to allow that all other processors in the
	1177	!-- directory created by PE0 can open their file
[3045]	1178	! CALL MPI_BARRIER( comm2d, ierr )
[1]	1179	#endif
[3045]	1180	! ENDIF
[1]	1181
	1182	!
[1031]	1183	!-- Create a new netCDF output file with requested netCDF format
[3045]	1184	! CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1185
	1186	!
[1]	1187	!-- Define the header
[3045]	1188	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1189
[3045]	1190	! ENDIF
[1]	1191
	1192	CASE ( 109 )
	1193	!
[102]	1194	!-- Set filename
[1779]	1195	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1196
	1197	!
[1031]	1198	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1199	!-- be opened for extension, if its variables match the actual run.
[102]	1200	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1201
	1202	IF ( netcdf_extend ) THEN
	1203	!
[1031]	1204	!-- Open an existing netCDF file for output
[1783]	1205	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1206	!
	1207	!-- Read header information and set all ids. If there is a mismatch
	1208	!-- between the previuos and the actual run, netcdf_extend is returned
	1209	!-- as .FALSE.
[1783]	1210	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1211
	1212	!
	1213	!-- Remove the local file, if it can not be extended
	1214	IF ( .NOT. netcdf_extend ) THEN
	1215	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1216	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1217	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1218	ENDIF
	1219
	1220	ENDIF
	1221
	1222	IF ( .NOT. netcdf_extend ) THEN
	1223	!
[1031]	1224	!-- Create a new netCDF output file with requested netCDF format
[1783]	1225	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1226	!
	1227	!-- Define the header
[1783]	1228	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1229
	1230	ENDIF
[410]	1231
[3159]	1232	CASE ( 118 )
	1233
	1234	IF ( myid == 0 ) THEN
	1235	filename = 'DATA_AGT_NETCDF'
[1468]	1236	!
[3159]	1237	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1238	!-- be opened for extension, if its variables match the actual run.
	1239	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1240
	1241	!
	1242	!-- Create a new netCDF output file with requested netCDF format
	1243	CALL netcdf_create_file( filename, id_set_agt, .FALSE., 43 )
	1244
	1245	!
	1246	!-- Define the header
	1247	CALL netcdf_define_header( 'ag', netcdf_extend, 0 )
	1248	ENDIF
	1249
	1250	! IF ( netcdf_extend ) THEN
	1251	! !
	1252	! !-- Open an existing netCDF file for output
	1253	! CALL netcdf_open_write_file( filename, id_set_agt, .FALSE., 41 )
	1254	! !
	1255	! !-- Read header information and set all ids. If there is a mismatch
	1256	! !-- between the previuos and the actual run, netcdf_extend is returned
	1257	! !-- as .FALSE.
	1258	! CALL netcdf_define_header( 'ag', netcdf_extend, 0 )
	1259	!
	1260	! !
	1261	! !-- Remove the local file, if it can not be extended
	1262	! IF ( .NOT. netcdf_extend ) THEN
	1263	! nc_stat = NF90_CLOSE( id_set_agt )
	1264	! CALL netcdf_handle_error( 'check_open', 42 )
	1265	! CALL local_system( 'rm ' // TRIM( filename ) )
	1266	! ENDIF
	1267	!
	1268	! ENDIF
	1269
	1270	IF ( .NOT. netcdf_extend ) THEN
	1271
	1272	!
	1273	! !-- For runs on multiple processors create the subdirectory
	1274	! IF ( myid_char /= '' ) THEN
	1275	! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1276	! THEN ! needs modification in case of non-extendable sets
	1277	! CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
	1278	! TRIM( coupling_char ) // '/' )
	1279	! ENDIF
	1280	! #if defined( __parallel )
	1281	! !
	1282	! !-- Set a barrier in order to allow that all other processors in the
	1283	! !-- directory created by PE0 can open their file
	1284	! CALL MPI_BARRIER( comm2d, ierr )
	1285	! #endif
	1286	! ENDIF
	1287
	1288	ENDIF
	1289
[3421]	1290
[3159]	1291	!
[1957]	1292	!-- nc-file for virtual flight measurements
	1293	CASE ( 199 )
	1294	!
	1295	!-- Set filename
	1296	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1297
[1957]	1298	!
	1299	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1300	!-- be opened for extension, if its variables match the actual run.
	1301	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1302
[1957]	1303	IF ( netcdf_extend ) THEN
	1304	!
	1305	!-- Open an existing netCDF file for output
	1306	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1307	!
	1308	!-- Read header information and set all ids. If there is a mismatch
	1309	!-- between the previuos and the actual run, netcdf_extend is returned
	1310	!-- as .FALSE.
	1311	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1312
	1313	!
	1314	!-- Remove the local file, if it can not be extended
	1315	IF ( .NOT. netcdf_extend ) THEN
	1316	nc_stat = NF90_CLOSE( id_set_fl )
	1317	CALL netcdf_handle_error( 'check_open', 533 )
	1318	CALL local_system( 'rm ' // TRIM( filename ) )
	1319	ENDIF
	1320
	1321	ENDIF
	1322
	1323	IF ( .NOT. netcdf_extend ) THEN
	1324	!
	1325	!-- Create a new netCDF output file with requested netCDF format
	1326	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1327	!
	1328	!-- Define the header
	1329	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1330
	1331	ENDIF
	1332
	1333
[564]	1334	CASE ( 201:200+2*max_masks )
[410]	1335	!
	1336	!-- Set filename depending on unit number
[564]	1337	IF ( file_id <= 200+max_masks ) THEN
	1338	mid = file_id - 200
[2669]	1339	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1340	filename = 'DATA_MASK_NETCDF' // TRIM( coupling_char ) // &
	1341	mask_char
[410]	1342	av = 0
	1343	ELSE
[564]	1344	mid = file_id - (200+max_masks)
[2669]	1345	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1346	filename = 'DATA_MASK_AV_NETCDF' // TRIM( coupling_char ) // &
	1347	mask_char
[410]	1348	av = 1
	1349	ENDIF
	1350	!
[1031]	1351	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1352	!-- be opened for extension, if its dimensions and variables match the
	1353	!-- actual run.
	1354	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1355
	1356	IF ( netcdf_extend ) THEN
	1357	!
[1031]	1358	!-- Open an existing netCDF file for output
[1783]	1359	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1360	.TRUE., 456 )
[410]	1361	!
	1362	!-- Read header information and set all ids. If there is a mismatch
	1363	!-- between the previuos and the actual run, netcdf_extend is returned
	1364	!-- as .FALSE.
[1783]	1365	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1366
[410]	1367	!
	1368	!-- Remove the local file, if it can not be extended
	1369	IF ( .NOT. netcdf_extend ) THEN
	1370	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1371	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1372	CALL local_system('rm ' // TRIM( filename ) )
	1373	ENDIF
[1]	1374
[410]	1375	ENDIF
	1376
	1377	IF ( .NOT. netcdf_extend ) THEN
[1]	1378	!
[1031]	1379	!-- Create a new netCDF output file with requested netCDF format
[1783]	1380	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1381	!
[410]	1382	!-- Define the header
[1783]	1383	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1384
	1385	ENDIF
	1386
	1387
	1388	#else
	1389
[564]	1390	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1391
	1392	!
[1]	1393	!-- Nothing is done in case of missing netcdf support
	1394	RETURN
	1395
	1396	#endif
	1397
	1398	CASE DEFAULT
	1399
[247]	1400	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1401	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1402
	1403	END SELECT
	1404
	1405	!
	1406	!-- Set open flag
	1407	openfile(file_id)%opened = .TRUE.
	1408
	1409	!
	1410	!-- Formats
[1320]	1411	8000 FORMAT (A/ &
[1359]	1412	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1413	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1414	109('-'))
[1]	1415
	1416	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |