Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 4109

Last change on this file since 4109 was 4099, checked in by suehring, 5 years ago
Bugfix in opening the parameter file (unit 11) in case of ocean precursor runs
Property svn:keywords set to `Id`
File size: 50.5 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[2696]	14	! You should have received a copy of the GNU General Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[3655]	17	! Copyright 1997-2019 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[3705]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 4099 2019-07-15 15:29:37Z suehring $
[4099]	27	! Bugfix in opening the parameter file (unit 11) in case of ocean precursor
	28	! runs.
	29	!
	30	! 4069 2019-07-01 14:05:51Z Giersch
[4069]	31	! Masked output running index mid has been introduced as a local variable to
	32	! avoid runtime error (Loop variable has been modified) in time_integration
	33	!
	34	! 3967 2019-05-09 16:04:34Z gronemeier
[3967]	35	! Save binary data of virtual measurements within separate folder
	36	!
	37	! 3812 2019-03-25 07:10:12Z gronemeier
[3812]	38	! Open binary surface output data within separate folder
	39	!
	40	! 3705 2019-01-29 19:56:39Z suehring
[3705]	41	! Open binary files for virtual measurements
	42	!
	43	! 3704 2019-01-29 19:51:41Z suehring
[3421]	44	! Open files for surface data
	45	!
	46	! 3399 2018-10-22 20:13:45Z gronemeier
[3241]	47	! unused variables and format statements removed
	48	!
	49	! 3159 2018-07-20 11:20:01Z sward
[3159]	50	! Added multi agent system
	51	!
	52	! 3045 2018-05-28 07:55:41Z Giersch
[3045]	53	! Output case 108 disabled
	54	!
	55	! 2964 2018-04-12 16:04:03Z Giersch
[2964]	56	! Error message moved to radiation_model_mod
	57	!
	58	! 2957 2018-04-11 08:48:06Z Giersch
[2957]	59	! Error message has been corrected in case of writing sky view factors
	60	!
	61	! 2906 2018-03-19 08:56:40Z Giersch
[2906]	62	! CASE 88 and 89 has been added for the input/output of sky view factors
	63	!
	64	! 2718 2018-01-02 08:49:38Z maronga
[2716]	65	! Corrected "Former revisions" section
	66	!
	67	! 2696 2017-12-14 17:12:51Z kanani
	68	! Change in file header (GPL part)
	69	!
	70	! 2669 2017-12-06 16:03:27Z raasch
[2669]	71	! file name extension for masked data files is changed to "_M##" and is now
	72	! appended at the end of the filename,
	73	! file ids not used any more have been removed
	74	!
	75	! 2516 2017-10-04 11:03:04Z suehring
[2516]	76	! Remove tabs
	77	!
	78	! 2514 2017-10-04 09:52:37Z suehring
[2512]	79	! upper bounds of cross section and 3d output changed from nx+1,ny+1 to nx,ny
	80	! no output of ghost layer data
	81	! iso2d-related parts removed
	82	!
	83	! 2300 2017-06-29 13:31:14Z raasch
[2300]	84	! -host
	85	!
	86	! 2298 2017-06-29 09:28:18Z raasch
[2298]	87	! -return_addres, return_username, avs_coor_file_..., avs_data_file_...,
	88	! cross_ts_numbers, cross_ts_number_count
[1321]	89	!
[2298]	90	! 2101 2017-01-05 16:42:31Z suehring
	91	!
[2064]	92	! 2063 2016-11-10 17:14:35Z raasch
	93	! bugfix: opening of PROGRESS file moved out of the NetCDF block
	94	!
[2041]	95	! 2040 2016-10-26 16:58:09Z gronemeier
[2040]	96	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
	97	!
[2001]	98	! 2000 2016-08-20 18:09:15Z knoop
	99	! Forced header and separation lines into 80 columns
	100	!
[1989]	101	! 1988 2016-08-10 14:49:06Z gronemeier
	102	! informative message added if files cannot be opened in newly created directory
	103	!
[1987]	104	! 1986 2016-08-10 14:07:17Z gronemeier
	105	! Bugfix: check if output can be opened in newly created directory. If not
	106	! wait one second and try again.
	107	!
[1975]	108	! 1974 2016-07-26 08:43:25Z gronemeier
	109	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	110	! in case of parallel I/O
	111	!
[1958]	112	! 1957 2016-07-07 10:43:48Z suehring
	113	! flight module added
	114	!
[1805]	115	! 1804 2016-04-05 16:30:18Z maronga
	116	! Removed code for parameter file check (__check)
	117	!
[1784]	118	! 1783 2016-03-06 18:36:17Z raasch
	119	! name change of netcdf routines and module + related changes
	120	!
[1780]	121	! 1779 2016-03-03 08:01:28Z raasch
	122	! coupling_char is trimmed at every place it occurs, because it can have
	123	! different length now
	124	!
[1746]	125	! 1745 2016-02-05 13:06:51Z gronemeier
	126	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	127	!
[1683]	128	! 1682 2015-10-07 23:56:08Z knoop
	129	! Code annotations made doxygen readable
	130	!
[1552]	131	! 1551 2015-03-03 14:18:16Z maronga
	132	! Removed redundant output for combine_plot_fields
	133	!
[1469]	134	! 1468 2014-09-24 14:06:57Z maronga
	135	! Adapted for use on up to 6-digit processor cores
	136	! Added file unit 117 (PROGRESS)
	137	!
[1360]	138	! 1359 2014-04-11 17:15:14Z hoffmann
	139	! Format of particle exchange statistics extended to reasonable numbers of
	140	! particles.
	141	!
[1354]	142	! 1353 2014-04-08 15:21:23Z heinze
	143	! REAL constants provided with KIND-attribute,
	144	! declaration for unused variables xkoor, ykoor, zkoor removed
	145	!
[1329]	146	! 1327 2014-03-21 11:00:16Z raasch
	147	! parts concerning iso2d and avs output removed
	148	!
[1321]	149	! 1320 2014-03-20 08:40:49Z raasch
[1320]	150	! ONLY-attribute added to USE-statements,
	151	! kind-parameters added to all INTEGER and REAL declaration statements,
	152	! kinds are defined in new module kinds,
	153	! old module precision_kind is removed,
	154	! revision history before 2012 removed,
	155	! comment fields (!:) to be used for variable explanations added to
	156	! all variable declaration statements
[1]	157	!
[1107]	158	! 1106 2013-03-04 05:31:38Z raasch
	159	! array_kind renamed precision_kind
	160	!
[1093]	161	! 1092 2013-02-02 11:24:22Z raasch
	162	! unused variables removed
	163	!
[1037]	164	! 1036 2012-10-22 13:43:42Z raasch
	165	! code put under GPL (PALM 3.9)
	166	!
[1035]	167	! 1031 2012-10-19 14:35:30Z raasch
	168	! netCDF4 without parallel file support implemented,
	169	! opening of netCDF files are done by new routines create_netcdf_file and
	170	! open_write_netcdf_file
	171	!
[965]	172	! 964 2012-07-26 09:14:24Z raasch
	173	! old profil-units (40:49) removed,
	174	! append feature removed from unit 14
	175	!
[850]	176	! 849 2012-03-15 10:35:09Z raasch
	177	! comment changed
	178	!
[810]	179	! 809 2012-01-30 13:32:58Z maronga
	180	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	181	!
[808]	182	! 807 2012-01-25 11:53:51Z maronga
	183	! New cpp directive "__check" implemented which is used by check_namelist_files
	184	!
[1]	185	! Revision 1.1 1997/08/11 06:10:55 raasch
	186	! Initial revision
	187	!
	188	!
	189	! Description:
	190	! ------------
[1682]	191	!> Check if file unit is open. If not, open file and, if necessary, write a
	192	!> header or start other initializing actions, respectively.
[1]	193	!------------------------------------------------------------------------------!
[1682]	194	SUBROUTINE check_open( file_id )
	195
[1]	196
[1320]	197	USE control_parameters, &
[2964]	198	ONLY: coupling_char, data_output_2d_on_each_pe, &
[4069]	199	max_masks, message_string, nz_do3d, openfile, &
[3241]	200	run_description_header
[1320]	201
	202	USE indices, &
[3241]	203	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nys, nz, nzb, nzt
[1320]	204
	205	USE kinds
	206
[1783]	207	#if defined( __netcdf )
	208	USE NETCDF
	209	#endif
[1320]	210
[1783]	211	USE netcdf_interface, &
[3241]	212	ONLY: id_set_agt, id_set_fl, id_set_mask, id_set_pr, &
[3159]	213	id_set_pts, id_set_sp, id_set_ts, id_set_xy, id_set_xz, &
	214	id_set_yz, id_set_3d, nc_stat, netcdf_create_file, &
	215	netcdf_data_format, netcdf_define_header, netcdf_handle_error, &
	216	netcdf_open_write_file
[1783]	217
[1320]	218	USE particle_attributes, &
	219	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	220	particle_groups
	221
[1]	222	USE pegrid
	223
[1986]	224	USE posix_calls_from_fortran, &
	225	ONLY: fortran_sleep
	226
[1320]	227
[1]	228	IMPLICIT NONE
	229
[2669]	230	CHARACTER (LEN=4) :: mask_char !<
[1682]	231	CHARACTER (LEN=30) :: filename !<
	232	CHARACTER (LEN=80) :: rtext !<
[1]	233
[1682]	234	INTEGER(iwp) :: av !<
	235	INTEGER(iwp) :: file_id !<
[1986]	236	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[4069]	237	INTEGER(iwp) :: mid !< masked output running index
[1320]	238
[4099]	239	LOGICAL :: file_exist !< file check
[2512]	240	LOGICAL :: netcdf_extend !<
[1]	241
	242	!
	243	!-- Immediate return if file already open
	244	IF ( openfile(file_id)%opened ) RETURN
	245
	246	!
	247	!-- Only certain files are allowed to be re-opened
	248	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	249	!-- has not been checked so far, if it works!
	250	IF ( openfile(file_id)%opened_before ) THEN
	251	SELECT CASE ( file_id )
[2669]	252	CASE ( 13, 14, 21, 22, 23, 80, 85, 117 )
[1]	253	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	254	message_string = 're-open of unit ' // &
[274]	255	'14 is not verified. Please check results!'
[247]	256	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	257	ENDIF
[143]	258
[1]	259	CASE DEFAULT
[1320]	260	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	261	' is not allowed'
[247]	262	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	263
[1]	264	RETURN
[143]	265
[1]	266	END SELECT
	267	ENDIF
	268
	269	!
	270	!-- Check if file may be opened on the relevant PE
	271	SELECT CASE ( file_id )
	272
[2669]	273	CASE ( 15, 16, 17, 18, 19, 50:59, 104:105, 107, 109, 117 )
[2514]	274
[493]	275	IF ( myid /= 0 ) THEN
[1320]	276	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	277	' not allowed for PE ',myid
	278	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	279	ENDIF
	280
[564]	281	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	282
[1031]	283	IF ( netcdf_data_format < 5 ) THEN
[247]	284
[410]	285	IF ( myid /= 0 ) THEN
[1320]	286	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	287	' not allowed for PE ',myid
	288	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	289	ENDIF
[2514]	290
[493]	291	ENDIF
[1]	292
	293	CASE ( 21, 22, 23 )
	294
	295	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	296	IF ( myid /= 0 ) THEN
[1320]	297	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	298	' not allowed for PE ',myid
[277]	299	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	300	END IF
[1]	301	ENDIF
	302
[2669]	303	CASE ( 90:99 )
[1]	304
	305	!
	306	!-- File-ids that are used temporarily in other routines
[1320]	307	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	308	' is not allowed since it is used otherwise'
[247]	309	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	310
[1]	311	END SELECT
	312
	313	!
	314	!-- Open relevant files
	315	SELECT CASE ( file_id )
	316
	317	CASE ( 11 )
[4099]	318	!
	319	!-- Read the parameter file. Therefore, inquire whether the file exist or
	320	!-- not. This is required for the ocean-atmoshere coupling. For an ocean
	321	!-- precursor run palmrun provides a PARIN_O file instead of a PARIN
	322	!-- file. Actually this should be considered in coupling_char, however,
	323	!-- in pmc_init the parameter file is already opened to read the
	324	!-- nesting parameters and decide whether it is a nested run or not,
	325	!-- but coupling_char is still not set at that moment (must be set after
	326	!- the nesting setup is read).
	327	!-- This, however, leads to the situation that for ocean
	328	!-- precursor runs PARIN is not available and the run crashes. Thus,
	329	!-- if the file is not there, PARIN_O will be read. An ocean precursor
	330	!-- run will be the only situation where this can happen.
	331	INQUIRE( FILE = 'PARIN' // TRIM( coupling_char ), &
	332	EXIST = file_exist )
	333
	334	IF ( file_exist ) THEN
	335	filename = 'PARIN' // TRIM( coupling_char )
	336	ELSE
	337	filename = 'PARIN_O'
	338	ENDIF
[1]	339
[4099]	340	OPEN ( 11, FILE= TRIM( filename ), FORM='FORMATTED', STATUS='OLD' )
[1]	341
	342	CASE ( 13 )
	343
	344	IF ( myid_char == '' ) THEN
[1779]	345	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	346	FORM='UNFORMATTED', STATUS='OLD' )
[1]	347	ELSE
[143]	348	!
[1468]	349	!-- First opening of unit 13 openes file _000000 on all PEs because
	350	!-- only this file contains the global variables
[143]	351	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	352	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	353	FORM='UNFORMATTED', STATUS='OLD' )
	354	ELSE
[1779]	355	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	356	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	357	ENDIF
[1]	358	ENDIF
	359
	360	CASE ( 14 )
	361
	362	IF ( myid_char == '' ) THEN
[1779]	363	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	364	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	365	ELSE
	366	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	367	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	368	ENDIF
[1804]	369	#if defined( __parallel )
[1]	370	!
	371	!-- Set a barrier in order to allow that all other processors in the
	372	!-- directory created by PE0 can open their file
	373	CALL MPI_BARRIER( comm2d, ierr )
	374	#endif
[1986]	375	ioerr = 1
	376	DO WHILE ( ioerr /= 0 )
	377	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	378	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	379	IF ( ioerr /= 0 ) THEN
	380	WRITE( 9, * ) '*** could not open "BINOUT'// &
	381	TRIM(coupling_char)//'/'//myid_char// &
	382	'"! Trying again in 1 sec.'
	383	CALL fortran_sleep( 1 )
	384	ENDIF
[1986]	385	ENDDO
	386
[1]	387	ENDIF
	388
	389	CASE ( 15 )
	390
[1779]	391	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	392	FORM='FORMATTED' )
[1]	393
	394	CASE ( 16 )
	395
[1779]	396	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	397	FORM='FORMATTED' )
[1]	398
	399	CASE ( 17 )
	400
[1779]	401	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	402	FORM='FORMATTED' )
[1]	403
	404	CASE ( 18 )
	405
[1779]	406	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	407	FORM='FORMATTED' )
[1]	408
	409	CASE ( 19 )
	410
[1779]	411	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	412
	413	CASE ( 20 )
	414
	415	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	416	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	417	ENDIF
	418	IF ( myid_char == '' ) THEN
[1779]	419	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	420	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	421	ELSE
[1804]	422	#if defined( __parallel )
[1]	423	!
	424	!-- Set a barrier in order to allow that all other processors in the
	425	!-- directory created by PE0 can open their file
	426	CALL MPI_BARRIER( comm2d, ierr )
	427	#endif
[1986]	428	ioerr = 1
	429	DO WHILE ( ioerr /= 0 )
	430	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	431	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	432	IOSTAT=ioerr )
[1988]	433	IF ( ioerr /= 0 ) THEN
	434	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	435	TRIM( coupling_char )//'/'//myid_char// &
	436	'"! Trying again in 1 sec.'
	437	CALL fortran_sleep( 1 )
	438	ENDIF
[1986]	439	ENDDO
	440
[1]	441	ENDIF
	442
	443	CASE ( 21 )
	444
	445	IF ( data_output_2d_on_each_pe ) THEN
[1320]	446	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	447	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	448	ELSE
[1779]	449	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	450	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	451	ENDIF
	452
	453	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	454	!
[2512]	455	!-- Write index bounds of total domain for combine_plot_fields
[1]	456	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	457	WRITE (21) 0, nx, 0, ny
[1]	458	ENDIF
	459
	460	ENDIF
	461
	462	CASE ( 22 )
	463
	464	IF ( data_output_2d_on_each_pe ) THEN
[1320]	465	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	466	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	467	ELSE
[1779]	468	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	469	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	470	ENDIF
	471
	472	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	473	!
[2512]	474	!-- Write index bounds of total domain for combine_plot_fields
[1]	475	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	476	WRITE (22) 0, nx, 0, nz+1 ! output part
[1]	477	ENDIF
	478
	479	ENDIF
	480
	481	CASE ( 23 )
	482
	483	IF ( data_output_2d_on_each_pe ) THEN
[1320]	484	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	485	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	486	ELSE
[1779]	487	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	488	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	489	ENDIF
	490
	491	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	492	!
[2512]	493	!-- Write index bounds of total domain for combine_plot_fields
[1]	494	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	495	WRITE (23) 0, ny, 0, nz+1 ! output part
[1]	496	ENDIF
	497
	498	ENDIF
[3421]	499
	500	CASE ( 25 )
	501	!
	502	!-- Binary files for surface data
[3812]	503	! OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM( coupling_char )// &
	504	! myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
[1]	505
[3812]	506	IF ( myid_char == '' ) THEN
	507	OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM( coupling_char )// &
	508	myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
	509	ELSE
	510	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	511	CALL local_system( 'mkdir SURFACE_DATA_BIN' // &
	512	TRIM( coupling_char ) )
	513	ENDIF
	514	#if defined( __parallel )
	515	!
	516	!-- Set a barrier in order to allow that all other processors in the
	517	!-- directory created by PE0 can open their file
	518	CALL MPI_BARRIER( comm2d, ierr )
	519	#endif
	520	ioerr = 1
	521	DO WHILE ( ioerr /= 0 )
	522	OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM(coupling_char)// &
	523	'/'//myid_char, &
	524	FORM='UNFORMATTED', IOSTAT=ioerr )
	525	IF ( ioerr /= 0 ) THEN
	526	WRITE( 9, * ) '*** could not open "SURFACE_DATA_BIN'// &
	527	TRIM(coupling_char)//'/'//myid_char// &
	528	'"! Trying again in 1 sec.'
	529	CALL fortran_sleep( 1 )
	530	ENDIF
	531	ENDDO
	532
	533	ENDIF
	534
[3421]	535	CASE ( 26 )
	536	!
	537	!-- Binary files for averaged surface data
[3812]	538	! OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM( coupling_char )//myid_char, &
	539	! FORM='UNFORMATTED', POSITION='APPEND' )
	540
	541	IF ( myid_char == '' ) THEN
	542	OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM( coupling_char )// &
	543	myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
	544	ELSE
	545	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	546	CALL local_system( 'mkdir SURFACE_DATA_AV_BIN' // &
	547	TRIM( coupling_char ) )
	548	ENDIF
	549	#if defined( __parallel )
	550	!
	551	!-- Set a barrier in order to allow that all other processors in the
	552	!-- directory created by PE0 can open their file
	553	CALL MPI_BARRIER( comm2d, ierr )
	554	#endif
	555	ioerr = 1
	556	DO WHILE ( ioerr /= 0 )
	557	OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM(coupling_char)// &
	558	'/'//myid_char, &
	559	FORM='UNFORMATTED', IOSTAT=ioerr )
	560	IF ( ioerr /= 0 ) THEN
	561	WRITE( 9, * ) '*** could not open "SURFACE_DATA_AV_BIN'// &
	562	TRIM(coupling_char)//'/'//myid_char// &
	563	'"! Trying again in 1 sec.'
	564	CALL fortran_sleep( 1 )
	565	ENDIF
	566	ENDDO
	567
	568	ENDIF
	569
[3704]	570	CASE ( 27 )
	571	!
	572	!-- Binary files for virtual measurement data
[3967]	573	IF ( myid_char == '' ) THEN
	574	OPEN ( 27, FILE='VIRTUAL_MEAS_BIN'//TRIM( coupling_char )// &
	575	myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
	576	ELSE
[3421]	577
[3967]	578	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	579	CALL local_system( 'mkdir VIRTUAL_MEAS_BIN' // &
	580	TRIM( coupling_char ) )
	581	ENDIF
	582	#if defined( __parallel )
	583	!
	584	!-- Set a barrier in order to allow that all other processors in the
	585	!-- directory created by PE0 can open their file
	586	CALL MPI_BARRIER( comm2d, ierr )
	587	#endif
	588	ioerr = 1
	589	DO WHILE ( ioerr /= 0 )
	590	OPEN ( 27, FILE='VIRTUAL_MEAS_BIN'//TRIM(coupling_char)// &
	591	'/'//myid_char, &
	592	FORM='UNFORMATTED', IOSTAT=ioerr )
	593	IF ( ioerr /= 0 ) THEN
	594	WRITE( 9, * ) '*** could not open "VIRTUAL_MEAS_BIN'// &
	595	TRIM(coupling_char)//'/'//myid_char// &
	596	'"! Trying again in 1 sec.'
	597	CALL fortran_sleep( 1 )
	598	ENDIF
	599	ENDDO
	600
	601	ENDIF
	602
[1]	603	CASE ( 30 )
	604
[1320]	605	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	606	FORM='UNFORMATTED' )
[1]	607	!
[2512]	608	!-- Specifications for combine_plot_fields
[1]	609	IF ( myid == 0 ) THEN
	610	#if defined( __parallel )
[2512]	611	WRITE ( 30 ) 0, nx, 0, ny, 0, nz_do3d
[1]	612	#endif
	613	ENDIF
	614
	615	CASE ( 80 )
	616
	617	IF ( myid_char == '' ) THEN
[105]	618	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	619	FORM='FORMATTED', POSITION='APPEND' )
[1]	620	ELSE
	621	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	622	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	623	TRIM( coupling_char ) )
[1]	624	ENDIF
[1804]	625	#if defined( __parallel )
[1]	626	!
	627	!-- Set a barrier in order to allow that thereafter all other
	628	!-- processors in the directory created by PE0 can open their file.
	629	!-- WARNING: The following barrier will lead to hanging jobs, if
	630	!-- check_open is first called from routine
	631	!-- allocate_prt_memory!
	632	IF ( .NOT. openfile(80)%opened_before ) THEN
	633	CALL MPI_BARRIER( comm2d, ierr )
	634	ENDIF
	635	#endif
[1320]	636	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	637	myid_char, &
[102]	638	FORM='FORMATTED', POSITION='APPEND' )
[1]	639	ENDIF
	640
	641	IF ( .NOT. openfile(80)%opened_before ) THEN
	642	WRITE ( 80, 8000 ) TRIM( run_description_header )
	643	ENDIF
	644
	645	CASE ( 85 )
	646
	647	IF ( myid_char == '' ) THEN
[1320]	648	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	649	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	650	ELSE
	651	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	652	CALL local_system( 'mkdir PARTICLE_DATA' // &
	653	TRIM( coupling_char ) )
[1]	654	ENDIF
[1804]	655	#if defined( __parallel )
[1]	656	!
	657	!-- Set a barrier in order to allow that thereafter all other
	658	!-- processors in the directory created by PE0 can open their file
	659	CALL MPI_BARRIER( comm2d, ierr )
	660	#endif
[1986]	661	ioerr = 1
	662	DO WHILE ( ioerr /= 0 )
	663	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	664	myid_char, &
	665	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	666	IF ( ioerr /= 0 ) THEN
[2906]	667	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	668	TRIM( coupling_char )//'/'//myid_char// &
[1988]	669	'"! Trying again in 1 sec.'
	670	CALL fortran_sleep( 1 )
	671	ENDIF
[1986]	672	ENDDO
	673
[1]	674	ENDIF
	675
	676	IF ( .NOT. openfile(85)%opened_before ) THEN
	677	WRITE ( 85 ) run_description_header
	678	!
	679	!-- Attention: change version number whenever the output format on
[849]	680	!-- unit 85 is changed (see also in routine
	681	!-- lpm_data_output_particles)
[1359]	682	rtext = 'data format version 3.1'
[1]	683	WRITE ( 85 ) rtext
[1320]	684	WRITE ( 85 ) number_of_particle_groups, &
[1]	685	max_number_of_particle_groups
	686	WRITE ( 85 ) particle_groups
[1359]	687	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	688	ENDIF
	689
[2063]	690	!
[2906]	691	!-- File where sky-view factors and further required data is stored will be
	692	!-- read
	693	CASE ( 88 )
	694
	695	IF ( myid_char == '' ) THEN
	696	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//myid_char, &
	697	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	698	ELSE
	699
	700	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//'/'//myid_char, &
	701	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	702	ENDIF
	703
	704	!
	705	!-- File where sky-view factors and further required data is stored will be
	706	!-- created
	707	CASE ( 89 )
	708
	709	IF ( myid_char == '' ) THEN
	710	OPEN ( 89, FILE='SVFOUT'//TRIM( coupling_char )//myid_char, &
	711	FORM='UNFORMATTED', STATUS='NEW' )
	712	ELSE
	713	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	714	CALL local_system( 'mkdir SVFOUT' // TRIM( coupling_char ) )
	715	ENDIF
	716	#if defined( __parallel )
	717	!
	718	!-- Set a barrier in order to allow that all other processors in the
	719	!-- directory created by PE0 can open their file
	720	CALL MPI_BARRIER( comm2d, ierr )
	721	#endif
	722	ioerr = 1
	723	DO WHILE ( ioerr /= 0 )
	724	OPEN ( 89, FILE='SVFOUT'//TRIM(coupling_char)//'/'//myid_char, &
	725	FORM='UNFORMATTED', STATUS='NEW', IOSTAT=ioerr )
	726	IF ( ioerr /= 0 ) THEN
[2957]	727	WRITE( 9, * ) '*** could not open "SVFOUT'// &
	728	TRIM(coupling_char)//'/'//myid_char// &
[2906]	729	'"! Trying again in 1 sec.'
	730	CALL fortran_sleep( 1 )
	731	ENDIF
	732	ENDDO
	733
	734	ENDIF
	735
	736	!
[2063]	737	!-- Progress file that is used by the PALM watchdog
	738	CASE ( 117 )
	739
	740	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	741	STATUS='REPLACE', FORM='FORMATTED' )
	742
[1]	743	#if defined( __netcdf )
	744	CASE ( 101, 111 )
	745	!
	746	!-- Set filename depending on unit number
	747	IF ( file_id == 101 ) THEN
[1779]	748	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	749	av = 0
	750	ELSE
[1779]	751	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	752	av = 1
	753	ENDIF
	754	!
[1031]	755	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	756	!-- be opened for extension, if its dimensions and variables match the
	757	!-- actual run.
	758	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	759	IF ( netcdf_extend ) THEN
	760	!
[1031]	761	!-- Open an existing netCDF file for output
[1783]	762	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	763	!
	764	!-- Read header information and set all ids. If there is a mismatch
	765	!-- between the previuos and the actual run, netcdf_extend is returned
	766	!-- as .FALSE.
[1783]	767	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	768
	769	!
	770	!-- Remove the local file, if it can not be extended
	771	IF ( .NOT. netcdf_extend ) THEN
	772	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	773	CALL netcdf_handle_error( 'check_open', 21 )
[493]	774	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	775	#if defined( __parallel )
[1745]	776	!
	777	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	778	!-- before any other processor tries to open a new file.
	779	!-- Barrier is only needed in case of parallel I/O
	780	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	781	#endif
[1]	782	ENDIF
	783
[1745]	784	ENDIF
[1]	785
	786	IF ( .NOT. netcdf_extend ) THEN
	787	!
[1031]	788	!-- Create a new netCDF output file with requested netCDF format
[1783]	789	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	790
	791	!
[1]	792	!-- Define the header
[1783]	793	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	794
[493]	795	!
[1031]	796	!-- In case of parallel netCDF output, create flag file which tells
[493]	797	!-- combine_plot_fields that nothing is to do.
[1031]	798	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	799	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	800	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	801	CLOSE( 99 )
	802	ENDIF
	803
[1]	804	ENDIF
	805
	806	CASE ( 102, 112 )
	807	!
	808	!-- Set filename depending on unit number
	809	IF ( file_id == 102 ) THEN
[1779]	810	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	811	av = 0
	812	ELSE
[1779]	813	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	814	av = 1
	815	ENDIF
	816	!
[1031]	817	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	818	!-- be opened for extension, if its dimensions and variables match the
	819	!-- actual run.
	820	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	821
	822	IF ( netcdf_extend ) THEN
	823	!
[1031]	824	!-- Open an existing netCDF file for output
[1783]	825	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	826	!
	827	!-- Read header information and set all ids. If there is a mismatch
	828	!-- between the previuos and the actual run, netcdf_extend is returned
	829	!-- as .FALSE.
[1783]	830	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	831
	832	!
	833	!-- Remove the local file, if it can not be extended
	834	IF ( .NOT. netcdf_extend ) THEN
	835	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	836	CALL netcdf_handle_error( 'check_open', 24 )
[493]	837	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	838	#if defined( __parallel )
[1745]	839	!
	840	!-- Set a barrier in order to assure that PE0 deleted the old file
	841	!-- before any other processor tries to open a new file
[1974]	842	!-- Barrier is only needed in case of parallel I/O
	843	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	844	#endif
[1]	845	ENDIF
	846
[1745]	847	ENDIF
[1]	848
	849	IF ( .NOT. netcdf_extend ) THEN
	850	!
[1031]	851	!-- Create a new netCDF output file with requested netCDF format
[1783]	852	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	853
	854	!
[1]	855	!-- Define the header
[1783]	856	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	857
[493]	858	!
[1031]	859	!-- In case of parallel netCDF output, create flag file which tells
[493]	860	!-- combine_plot_fields that nothing is to do.
[1031]	861	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	862	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	863	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	864	CLOSE( 99 )
	865	ENDIF
	866
[1]	867	ENDIF
	868
	869	CASE ( 103, 113 )
	870	!
	871	!-- Set filename depending on unit number
	872	IF ( file_id == 103 ) THEN
[1779]	873	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	874	av = 0
	875	ELSE
[1779]	876	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	877	av = 1
	878	ENDIF
	879	!
[1031]	880	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	881	!-- be opened for extension, if its dimensions and variables match the
	882	!-- actual run.
	883	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	884
	885	IF ( netcdf_extend ) THEN
	886	!
[1031]	887	!-- Open an existing netCDF file for output
[1783]	888	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	889	!
	890	!-- Read header information and set all ids. If there is a mismatch
	891	!-- between the previuos and the actual run, netcdf_extend is returned
	892	!-- as .FALSE.
[1783]	893	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	894
	895	!
	896	!-- Remove the local file, if it can not be extended
	897	IF ( .NOT. netcdf_extend ) THEN
	898	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	899	CALL netcdf_handle_error( 'check_open', 27 )
[493]	900	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	901	#if defined( __parallel )
[1745]	902	!
	903	!-- Set a barrier in order to assure that PE0 deleted the old file
	904	!-- before any other processor tries to open a new file
[1974]	905	!-- Barrier is only needed in case of parallel I/O
	906	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	907	#endif
[1]	908	ENDIF
	909
[1745]	910	ENDIF
[1]	911
	912	IF ( .NOT. netcdf_extend ) THEN
	913	!
[1031]	914	!-- Create a new netCDF output file with requested netCDF format
[1783]	915	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	916
	917	!
[1]	918	!-- Define the header
[1783]	919	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	920
[493]	921	!
[1031]	922	!-- In case of parallel netCDF output, create flag file which tells
[493]	923	!-- combine_plot_fields that nothing is to do.
[1031]	924	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	925	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	926	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	927	CLOSE( 99 )
	928	ENDIF
	929
[1]	930	ENDIF
	931
	932	CASE ( 104 )
	933	!
[102]	934	!-- Set filename
[1779]	935	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	936
	937	!
[1031]	938	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	939	!-- be opened for extension, if its variables match the actual run.
[102]	940	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	941
	942	IF ( netcdf_extend ) THEN
	943	!
[1031]	944	!-- Open an existing netCDF file for output
[1783]	945	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	946	!
	947	!-- Read header information and set all ids. If there is a mismatch
	948	!-- between the previuos and the actual run, netcdf_extend is returned
	949	!-- as .FALSE.
[1783]	950	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	951
	952	!
	953	!-- Remove the local file, if it can not be extended
	954	IF ( .NOT. netcdf_extend ) THEN
	955	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	956	CALL netcdf_handle_error( 'check_open', 30 )
[102]	957	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	958	ENDIF
	959
	960	ENDIF
	961
	962	IF ( .NOT. netcdf_extend ) THEN
	963	!
[1031]	964	!-- Create a new netCDF output file with requested netCDF format
[1783]	965	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	966	!
	967	!-- Define the header
[1783]	968	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	969
	970	ENDIF
	971
	972	CASE ( 105 )
	973	!
[102]	974	!-- Set filename
[1779]	975	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	976
	977	!
[1031]	978	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	979	!-- be opened for extension, if its variables match the actual run.
[102]	980	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	981
	982	IF ( netcdf_extend ) THEN
	983	!
[1031]	984	!-- Open an existing netCDF file for output
[1783]	985	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	986	!
	987	!-- Read header information and set all ids. If there is a mismatch
	988	!-- between the previuos and the actual run, netcdf_extend is returned
	989	!-- as .FALSE.
[1783]	990	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	991
	992	!
	993	!-- Remove the local file, if it can not be extended
	994	IF ( .NOT. netcdf_extend ) THEN
	995	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	996	CALL netcdf_handle_error( 'check_open', 33 )
[102]	997	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	998	ENDIF
	999
	1000	ENDIF
	1001
	1002	IF ( .NOT. netcdf_extend ) THEN
	1003	!
[1031]	1004	!-- Create a new netCDF output file with requested netCDF format
[1783]	1005	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	1006	!
	1007	!-- Define the header
[1783]	1008	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	1009
	1010	ENDIF
	1011
	1012
	1013	CASE ( 106, 116 )
	1014	!
	1015	!-- Set filename depending on unit number
	1016	IF ( file_id == 106 ) THEN
[1779]	1017	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	1018	av = 0
	1019	ELSE
[1779]	1020	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	1021	av = 1
	1022	ENDIF
	1023	!
[1031]	1024	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	1025	!-- be opened for extension, if its dimensions and variables match the
	1026	!-- actual run.
	1027	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1028	IF ( netcdf_extend ) THEN
	1029	!
[1031]	1030	!-- Open an existing netCDF file for output
[1783]	1031	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	1032	!
	1033	!-- Read header information and set all ids. If there is a mismatch
	1034	!-- between the previuos and the actual run, netcdf_extend is returned
	1035	!-- as .FALSE.
[1783]	1036	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	1037
	1038	!
	1039	!-- Remove the local file, if it can not be extended
	1040	IF ( .NOT. netcdf_extend ) THEN
	1041	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	1042	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	1043	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	1044	#if defined( __parallel )
[1745]	1045	!
	1046	!-- Set a barrier in order to assure that PE0 deleted the old file
	1047	!-- before any other processor tries to open a new file
[1974]	1048	!-- Barrier is only needed in case of parallel I/O
	1049	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	1050	#endif
[1]	1051	ENDIF
	1052
[1745]	1053	ENDIF
[1]	1054
	1055	IF ( .NOT. netcdf_extend ) THEN
	1056	!
[1031]	1057	!-- Create a new netCDF output file with requested netCDF format
[1783]	1058	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	1059
	1060	!
[1]	1061	!-- Define the header
[1783]	1062	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	1063
[493]	1064	!
[1031]	1065	!-- In case of parallel netCDF output, create flag file which tells
[493]	1066	!-- combine_plot_fields that nothing is to do.
[1031]	1067	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	1068	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1069	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1070	CLOSE( 99 )
	1071	ENDIF
	1072
[1]	1073	ENDIF
	1074
	1075
	1076	CASE ( 107 )
	1077	!
[102]	1078	!-- Set filename
[1779]	1079	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	1080
	1081	!
[1031]	1082	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1083	!-- be opened for extension, if its variables match the actual run.
[102]	1084	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1085
	1086	IF ( netcdf_extend ) THEN
	1087	!
[1031]	1088	!-- Open an existing netCDF file for output
[1783]	1089	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	1090
[1]	1091	!
	1092	!-- Read header information and set all ids. If there is a mismatch
	1093	!-- between the previuos and the actual run, netcdf_extend is returned
	1094	!-- as .FALSE.
[1783]	1095	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1096
	1097	!
	1098	!-- Remove the local file, if it can not be extended
	1099	IF ( .NOT. netcdf_extend ) THEN
	1100	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	1101	CALL netcdf_handle_error( 'check_open', 39 )
[102]	1102	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1103	ENDIF
	1104
	1105	ENDIF
	1106
	1107	IF ( .NOT. netcdf_extend ) THEN
	1108	!
[1031]	1109	!-- Create a new netCDF output file with requested netCDF format
[1783]	1110	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	1111	!
	1112	!-- Define the header
[1783]	1113	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1114
	1115	ENDIF
	1116
[3045]	1117	!
	1118	!-- Currently disabled
	1119	! CASE ( 108 )
[1]	1120
[3045]	1121	! IF ( myid_char == '' ) THEN
	1122	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
	1123	! ELSE
	1124	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1125	! myid_char
	1126	! ENDIF
[1]	1127	!
[1031]	1128	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1129	!-- be opened for extension, if its variables match the actual run.
[3045]	1130	! INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1131
[3045]	1132	! IF ( netcdf_extend ) THEN
[1]	1133	!
[1031]	1134	!-- Open an existing netCDF file for output
[3045]	1135	! CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	1136	!
	1137	!-- Read header information and set all ids. If there is a mismatch
	1138	!-- between the previuos and the actual run, netcdf_extend is returned
	1139	!-- as .FALSE.
[3045]	1140	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1141
	1142	!
	1143	!-- Remove the local file, if it can not be extended
[3045]	1144	! IF ( .NOT. netcdf_extend ) THEN
	1145	! nc_stat = NF90_CLOSE( id_set_prt )
	1146	! CALL netcdf_handle_error( 'check_open', 42 )
	1147	! CALL local_system( 'rm ' // TRIM( filename ) )
	1148	! ENDIF
[1]	1149
[3045]	1150	! ENDIF
[1]	1151
[3045]	1152	! IF ( .NOT. netcdf_extend ) THEN
[1]	1153
	1154	!
	1155	!-- For runs on multiple processors create the subdirectory
[3045]	1156	! IF ( myid_char /= '' ) THEN
	1157	! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1158	! THEN ! needs modification in case of non-extendable sets
	1159	! CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
	1160	! TRIM( coupling_char ) // '/' )
	1161	! ENDIF
[1804]	1162	#if defined( __parallel )
[807]	1163	!
[1]	1164	!-- Set a barrier in order to allow that all other processors in the
	1165	!-- directory created by PE0 can open their file
[3045]	1166	! CALL MPI_BARRIER( comm2d, ierr )
[1]	1167	#endif
[3045]	1168	! ENDIF
[1]	1169
	1170	!
[1031]	1171	!-- Create a new netCDF output file with requested netCDF format
[3045]	1172	! CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1173
	1174	!
[1]	1175	!-- Define the header
[3045]	1176	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1177
[3045]	1178	! ENDIF
[1]	1179
	1180	CASE ( 109 )
	1181	!
[102]	1182	!-- Set filename
[1779]	1183	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1184
	1185	!
[1031]	1186	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1187	!-- be opened for extension, if its variables match the actual run.
[102]	1188	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1189
	1190	IF ( netcdf_extend ) THEN
	1191	!
[1031]	1192	!-- Open an existing netCDF file for output
[1783]	1193	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1194	!
	1195	!-- Read header information and set all ids. If there is a mismatch
	1196	!-- between the previuos and the actual run, netcdf_extend is returned
	1197	!-- as .FALSE.
[1783]	1198	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1199
	1200	!
	1201	!-- Remove the local file, if it can not be extended
	1202	IF ( .NOT. netcdf_extend ) THEN
	1203	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1204	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1205	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1206	ENDIF
	1207
	1208	ENDIF
	1209
	1210	IF ( .NOT. netcdf_extend ) THEN
	1211	!
[1031]	1212	!-- Create a new netCDF output file with requested netCDF format
[1783]	1213	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1214	!
	1215	!-- Define the header
[1783]	1216	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1217
	1218	ENDIF
[410]	1219
[3159]	1220	CASE ( 118 )
	1221
	1222	IF ( myid == 0 ) THEN
	1223	filename = 'DATA_AGT_NETCDF'
[1468]	1224	!
[3159]	1225	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1226	!-- be opened for extension, if its variables match the actual run.
	1227	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1228
	1229	!
	1230	!-- Create a new netCDF output file with requested netCDF format
	1231	CALL netcdf_create_file( filename, id_set_agt, .FALSE., 43 )
	1232
	1233	!
	1234	!-- Define the header
	1235	CALL netcdf_define_header( 'ag', netcdf_extend, 0 )
	1236	ENDIF
	1237
	1238	! IF ( netcdf_extend ) THEN
	1239	! !
	1240	! !-- Open an existing netCDF file for output
	1241	! CALL netcdf_open_write_file( filename, id_set_agt, .FALSE., 41 )
	1242	! !
	1243	! !-- Read header information and set all ids. If there is a mismatch
	1244	! !-- between the previuos and the actual run, netcdf_extend is returned
	1245	! !-- as .FALSE.
	1246	! CALL netcdf_define_header( 'ag', netcdf_extend, 0 )
	1247	!
	1248	! !
	1249	! !-- Remove the local file, if it can not be extended
	1250	! IF ( .NOT. netcdf_extend ) THEN
	1251	! nc_stat = NF90_CLOSE( id_set_agt )
	1252	! CALL netcdf_handle_error( 'check_open', 42 )
	1253	! CALL local_system( 'rm ' // TRIM( filename ) )
	1254	! ENDIF
	1255	!
	1256	! ENDIF
	1257
	1258	IF ( .NOT. netcdf_extend ) THEN
	1259
	1260	!
	1261	! !-- For runs on multiple processors create the subdirectory
	1262	! IF ( myid_char /= '' ) THEN
	1263	! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1264	! THEN ! needs modification in case of non-extendable sets
	1265	! CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
	1266	! TRIM( coupling_char ) // '/' )
	1267	! ENDIF
	1268	! #if defined( __parallel )
	1269	! !
	1270	! !-- Set a barrier in order to allow that all other processors in the
	1271	! !-- directory created by PE0 can open their file
	1272	! CALL MPI_BARRIER( comm2d, ierr )
	1273	! #endif
	1274	! ENDIF
	1275
	1276	ENDIF
	1277
[3421]	1278
[3159]	1279	!
[1957]	1280	!-- nc-file for virtual flight measurements
	1281	CASE ( 199 )
	1282	!
	1283	!-- Set filename
	1284	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1285
[1957]	1286	!
	1287	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1288	!-- be opened for extension, if its variables match the actual run.
	1289	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1290
[1957]	1291	IF ( netcdf_extend ) THEN
	1292	!
	1293	!-- Open an existing netCDF file for output
	1294	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1295	!
	1296	!-- Read header information and set all ids. If there is a mismatch
	1297	!-- between the previuos and the actual run, netcdf_extend is returned
	1298	!-- as .FALSE.
	1299	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1300
	1301	!
	1302	!-- Remove the local file, if it can not be extended
	1303	IF ( .NOT. netcdf_extend ) THEN
	1304	nc_stat = NF90_CLOSE( id_set_fl )
	1305	CALL netcdf_handle_error( 'check_open', 533 )
	1306	CALL local_system( 'rm ' // TRIM( filename ) )
	1307	ENDIF
	1308
	1309	ENDIF
	1310
	1311	IF ( .NOT. netcdf_extend ) THEN
	1312	!
	1313	!-- Create a new netCDF output file with requested netCDF format
	1314	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1315	!
	1316	!-- Define the header
	1317	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1318
	1319	ENDIF
	1320
	1321
[564]	1322	CASE ( 201:200+2*max_masks )
[410]	1323	!
	1324	!-- Set filename depending on unit number
[564]	1325	IF ( file_id <= 200+max_masks ) THEN
	1326	mid = file_id - 200
[2669]	1327	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1328	filename = 'DATA_MASK_NETCDF' // TRIM( coupling_char ) // &
	1329	mask_char
[410]	1330	av = 0
	1331	ELSE
[564]	1332	mid = file_id - (200+max_masks)
[2669]	1333	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1334	filename = 'DATA_MASK_AV_NETCDF' // TRIM( coupling_char ) // &
	1335	mask_char
[410]	1336	av = 1
	1337	ENDIF
	1338	!
[1031]	1339	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1340	!-- be opened for extension, if its dimensions and variables match the
	1341	!-- actual run.
	1342	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1343
	1344	IF ( netcdf_extend ) THEN
	1345	!
[1031]	1346	!-- Open an existing netCDF file for output
[1783]	1347	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1348	.TRUE., 456 )
[410]	1349	!
	1350	!-- Read header information and set all ids. If there is a mismatch
	1351	!-- between the previuos and the actual run, netcdf_extend is returned
	1352	!-- as .FALSE.
[1783]	1353	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1354
[410]	1355	!
	1356	!-- Remove the local file, if it can not be extended
	1357	IF ( .NOT. netcdf_extend ) THEN
	1358	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1359	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1360	CALL local_system('rm ' // TRIM( filename ) )
	1361	ENDIF
[1]	1362
[410]	1363	ENDIF
	1364
	1365	IF ( .NOT. netcdf_extend ) THEN
[1]	1366	!
[1031]	1367	!-- Create a new netCDF output file with requested netCDF format
[1783]	1368	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1369	!
[410]	1370	!-- Define the header
[1783]	1371	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1372
	1373	ENDIF
	1374
	1375
	1376	#else
	1377
[564]	1378	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1379
	1380	!
[1]	1381	!-- Nothing is done in case of missing netcdf support
	1382	RETURN
	1383
	1384	#endif
	1385
	1386	CASE DEFAULT
	1387
[247]	1388	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1389	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1390
	1391	END SELECT
	1392
	1393	!
	1394	!-- Set open flag
	1395	openfile(file_id)%opened = .TRUE.
	1396
	1397	!
	1398	!-- Formats
[1320]	1399	8000 FORMAT (A/ &
[1359]	1400	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1401	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1402	109('-'))
[1]	1403
	1404	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |