Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 4077

Last change on this file since 4077 was 4069, checked in by Giersch, 5 years ago
Bugfix for masked output, compiler warning removed, test case for wind turbine model revised
Property svn:keywords set to `Id`
File size: 49.2 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[2696]	14	! You should have received a copy of the GNU General Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[3655]	17	! Copyright 1997-2019 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[3705]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 4069 2019-07-01 14:05:51Z gronemeier $
[4069]	27	! Masked output running index mid has been introduced as a local variable to
	28	! avoid runtime error (Loop variable has been modified) in time_integration
	29	!
	30	! 3967 2019-05-09 16:04:34Z gronemeier
[3967]	31	! Save binary data of virtual measurements within separate folder
	32	!
	33	! 3812 2019-03-25 07:10:12Z gronemeier
[3812]	34	! Open binary surface output data within separate folder
	35	!
	36	! 3705 2019-01-29 19:56:39Z suehring
[3705]	37	! Open binary files for virtual measurements
	38	!
	39	! 3704 2019-01-29 19:51:41Z suehring
[3421]	40	! Open files for surface data
	41	!
	42	! 3399 2018-10-22 20:13:45Z gronemeier
[3241]	43	! unused variables and format statements removed
	44	!
	45	! 3159 2018-07-20 11:20:01Z sward
[3159]	46	! Added multi agent system
	47	!
	48	! 3045 2018-05-28 07:55:41Z Giersch
[3045]	49	! Output case 108 disabled
	50	!
	51	! 2964 2018-04-12 16:04:03Z Giersch
[2964]	52	! Error message moved to radiation_model_mod
	53	!
	54	! 2957 2018-04-11 08:48:06Z Giersch
[2957]	55	! Error message has been corrected in case of writing sky view factors
	56	!
	57	! 2906 2018-03-19 08:56:40Z Giersch
[2906]	58	! CASE 88 and 89 has been added for the input/output of sky view factors
	59	!
	60	! 2718 2018-01-02 08:49:38Z maronga
[2716]	61	! Corrected "Former revisions" section
	62	!
	63	! 2696 2017-12-14 17:12:51Z kanani
	64	! Change in file header (GPL part)
	65	!
	66	! 2669 2017-12-06 16:03:27Z raasch
[2669]	67	! file name extension for masked data files is changed to "_M##" and is now
	68	! appended at the end of the filename,
	69	! file ids not used any more have been removed
	70	!
	71	! 2516 2017-10-04 11:03:04Z suehring
[2516]	72	! Remove tabs
	73	!
	74	! 2514 2017-10-04 09:52:37Z suehring
[2512]	75	! upper bounds of cross section and 3d output changed from nx+1,ny+1 to nx,ny
	76	! no output of ghost layer data
	77	! iso2d-related parts removed
	78	!
	79	! 2300 2017-06-29 13:31:14Z raasch
[2300]	80	! -host
	81	!
	82	! 2298 2017-06-29 09:28:18Z raasch
[2298]	83	! -return_addres, return_username, avs_coor_file_..., avs_data_file_...,
	84	! cross_ts_numbers, cross_ts_number_count
[1321]	85	!
[2298]	86	! 2101 2017-01-05 16:42:31Z suehring
	87	!
[2064]	88	! 2063 2016-11-10 17:14:35Z raasch
	89	! bugfix: opening of PROGRESS file moved out of the NetCDF block
	90	!
[2041]	91	! 2040 2016-10-26 16:58:09Z gronemeier
[2040]	92	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
	93	!
[2001]	94	! 2000 2016-08-20 18:09:15Z knoop
	95	! Forced header and separation lines into 80 columns
	96	!
[1989]	97	! 1988 2016-08-10 14:49:06Z gronemeier
	98	! informative message added if files cannot be opened in newly created directory
	99	!
[1987]	100	! 1986 2016-08-10 14:07:17Z gronemeier
	101	! Bugfix: check if output can be opened in newly created directory. If not
	102	! wait one second and try again.
	103	!
[1975]	104	! 1974 2016-07-26 08:43:25Z gronemeier
	105	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	106	! in case of parallel I/O
	107	!
[1958]	108	! 1957 2016-07-07 10:43:48Z suehring
	109	! flight module added
	110	!
[1805]	111	! 1804 2016-04-05 16:30:18Z maronga
	112	! Removed code for parameter file check (__check)
	113	!
[1784]	114	! 1783 2016-03-06 18:36:17Z raasch
	115	! name change of netcdf routines and module + related changes
	116	!
[1780]	117	! 1779 2016-03-03 08:01:28Z raasch
	118	! coupling_char is trimmed at every place it occurs, because it can have
	119	! different length now
	120	!
[1746]	121	! 1745 2016-02-05 13:06:51Z gronemeier
	122	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	123	!
[1683]	124	! 1682 2015-10-07 23:56:08Z knoop
	125	! Code annotations made doxygen readable
	126	!
[1552]	127	! 1551 2015-03-03 14:18:16Z maronga
	128	! Removed redundant output for combine_plot_fields
	129	!
[1469]	130	! 1468 2014-09-24 14:06:57Z maronga
	131	! Adapted for use on up to 6-digit processor cores
	132	! Added file unit 117 (PROGRESS)
	133	!
[1360]	134	! 1359 2014-04-11 17:15:14Z hoffmann
	135	! Format of particle exchange statistics extended to reasonable numbers of
	136	! particles.
	137	!
[1354]	138	! 1353 2014-04-08 15:21:23Z heinze
	139	! REAL constants provided with KIND-attribute,
	140	! declaration for unused variables xkoor, ykoor, zkoor removed
	141	!
[1329]	142	! 1327 2014-03-21 11:00:16Z raasch
	143	! parts concerning iso2d and avs output removed
	144	!
[1321]	145	! 1320 2014-03-20 08:40:49Z raasch
[1320]	146	! ONLY-attribute added to USE-statements,
	147	! kind-parameters added to all INTEGER and REAL declaration statements,
	148	! kinds are defined in new module kinds,
	149	! old module precision_kind is removed,
	150	! revision history before 2012 removed,
	151	! comment fields (!:) to be used for variable explanations added to
	152	! all variable declaration statements
[1]	153	!
[1107]	154	! 1106 2013-03-04 05:31:38Z raasch
	155	! array_kind renamed precision_kind
	156	!
[1093]	157	! 1092 2013-02-02 11:24:22Z raasch
	158	! unused variables removed
	159	!
[1037]	160	! 1036 2012-10-22 13:43:42Z raasch
	161	! code put under GPL (PALM 3.9)
	162	!
[1035]	163	! 1031 2012-10-19 14:35:30Z raasch
	164	! netCDF4 without parallel file support implemented,
	165	! opening of netCDF files are done by new routines create_netcdf_file and
	166	! open_write_netcdf_file
	167	!
[965]	168	! 964 2012-07-26 09:14:24Z raasch
	169	! old profil-units (40:49) removed,
	170	! append feature removed from unit 14
	171	!
[850]	172	! 849 2012-03-15 10:35:09Z raasch
	173	! comment changed
	174	!
[810]	175	! 809 2012-01-30 13:32:58Z maronga
	176	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	177	!
[808]	178	! 807 2012-01-25 11:53:51Z maronga
	179	! New cpp directive "__check" implemented which is used by check_namelist_files
	180	!
[1]	181	! Revision 1.1 1997/08/11 06:10:55 raasch
	182	! Initial revision
	183	!
	184	!
	185	! Description:
	186	! ------------
[1682]	187	!> Check if file unit is open. If not, open file and, if necessary, write a
	188	!> header or start other initializing actions, respectively.
[1]	189	!------------------------------------------------------------------------------!
[1682]	190	SUBROUTINE check_open( file_id )
	191
[1]	192
[1320]	193	USE control_parameters, &
[2964]	194	ONLY: coupling_char, data_output_2d_on_each_pe, &
[4069]	195	max_masks, message_string, nz_do3d, openfile, &
[3241]	196	run_description_header
[1320]	197
	198	USE indices, &
[3241]	199	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nys, nz, nzb, nzt
[1320]	200
	201	USE kinds
	202
[1783]	203	#if defined( __netcdf )
	204	USE NETCDF
	205	#endif
[1320]	206
[1783]	207	USE netcdf_interface, &
[3241]	208	ONLY: id_set_agt, id_set_fl, id_set_mask, id_set_pr, &
[3159]	209	id_set_pts, id_set_sp, id_set_ts, id_set_xy, id_set_xz, &
	210	id_set_yz, id_set_3d, nc_stat, netcdf_create_file, &
	211	netcdf_data_format, netcdf_define_header, netcdf_handle_error, &
	212	netcdf_open_write_file
[1783]	213
[1320]	214	USE particle_attributes, &
	215	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	216	particle_groups
	217
[1]	218	USE pegrid
	219
[1986]	220	USE posix_calls_from_fortran, &
	221	ONLY: fortran_sleep
	222
[1320]	223
[1]	224	IMPLICIT NONE
	225
[2669]	226	CHARACTER (LEN=4) :: mask_char !<
[1682]	227	CHARACTER (LEN=30) :: filename !<
	228	CHARACTER (LEN=80) :: rtext !<
[1]	229
[1682]	230	INTEGER(iwp) :: av !<
	231	INTEGER(iwp) :: file_id !<
[1986]	232	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[4069]	233	INTEGER(iwp) :: mid !< masked output running index
[1320]	234
[2512]	235	LOGICAL :: netcdf_extend !<
[1]	236
	237	!
	238	!-- Immediate return if file already open
	239	IF ( openfile(file_id)%opened ) RETURN
	240
	241	!
	242	!-- Only certain files are allowed to be re-opened
	243	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	244	!-- has not been checked so far, if it works!
	245	IF ( openfile(file_id)%opened_before ) THEN
	246	SELECT CASE ( file_id )
[2669]	247	CASE ( 13, 14, 21, 22, 23, 80, 85, 117 )
[1]	248	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	249	message_string = 're-open of unit ' // &
[274]	250	'14 is not verified. Please check results!'
[247]	251	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	252	ENDIF
[143]	253
[1]	254	CASE DEFAULT
[1320]	255	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	256	' is not allowed'
[247]	257	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	258
[1]	259	RETURN
[143]	260
[1]	261	END SELECT
	262	ENDIF
	263
	264	!
	265	!-- Check if file may be opened on the relevant PE
	266	SELECT CASE ( file_id )
	267
[2669]	268	CASE ( 15, 16, 17, 18, 19, 50:59, 104:105, 107, 109, 117 )
[2514]	269
[493]	270	IF ( myid /= 0 ) THEN
[1320]	271	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	272	' not allowed for PE ',myid
	273	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	274	ENDIF
	275
[564]	276	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	277
[1031]	278	IF ( netcdf_data_format < 5 ) THEN
[247]	279
[410]	280	IF ( myid /= 0 ) THEN
[1320]	281	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	282	' not allowed for PE ',myid
	283	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	284	ENDIF
[2514]	285
[493]	286	ENDIF
[1]	287
	288	CASE ( 21, 22, 23 )
	289
	290	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	291	IF ( myid /= 0 ) THEN
[1320]	292	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	293	' not allowed for PE ',myid
[277]	294	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	295	END IF
[1]	296	ENDIF
	297
[2669]	298	CASE ( 90:99 )
[1]	299
	300	!
	301	!-- File-ids that are used temporarily in other routines
[1320]	302	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	303	' is not allowed since it is used otherwise'
[247]	304	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	305
[1]	306	END SELECT
	307
	308	!
	309	!-- Open relevant files
	310	SELECT CASE ( file_id )
	311
	312	CASE ( 11 )
	313
[1779]	314	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
[102]	315	STATUS='OLD' )
[1]	316
	317	CASE ( 13 )
	318
	319	IF ( myid_char == '' ) THEN
[1779]	320	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	321	FORM='UNFORMATTED', STATUS='OLD' )
[1]	322	ELSE
[143]	323	!
[1468]	324	!-- First opening of unit 13 openes file _000000 on all PEs because
	325	!-- only this file contains the global variables
[143]	326	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	327	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	328	FORM='UNFORMATTED', STATUS='OLD' )
	329	ELSE
[1779]	330	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	331	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	332	ENDIF
[1]	333	ENDIF
	334
	335	CASE ( 14 )
	336
	337	IF ( myid_char == '' ) THEN
[1779]	338	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	339	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	340	ELSE
	341	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	342	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	343	ENDIF
[1804]	344	#if defined( __parallel )
[1]	345	!
	346	!-- Set a barrier in order to allow that all other processors in the
	347	!-- directory created by PE0 can open their file
	348	CALL MPI_BARRIER( comm2d, ierr )
	349	#endif
[1986]	350	ioerr = 1
	351	DO WHILE ( ioerr /= 0 )
	352	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	353	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	354	IF ( ioerr /= 0 ) THEN
	355	WRITE( 9, * ) '*** could not open "BINOUT'// &
	356	TRIM(coupling_char)//'/'//myid_char// &
	357	'"! Trying again in 1 sec.'
	358	CALL fortran_sleep( 1 )
	359	ENDIF
[1986]	360	ENDDO
	361
[1]	362	ENDIF
	363
	364	CASE ( 15 )
	365
[1779]	366	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	367	FORM='FORMATTED' )
[1]	368
	369	CASE ( 16 )
	370
[1779]	371	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	372	FORM='FORMATTED' )
[1]	373
	374	CASE ( 17 )
	375
[1779]	376	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	377	FORM='FORMATTED' )
[1]	378
	379	CASE ( 18 )
	380
[1779]	381	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	382	FORM='FORMATTED' )
[1]	383
	384	CASE ( 19 )
	385
[1779]	386	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	387
	388	CASE ( 20 )
	389
	390	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	391	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	392	ENDIF
	393	IF ( myid_char == '' ) THEN
[1779]	394	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	395	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	396	ELSE
[1804]	397	#if defined( __parallel )
[1]	398	!
	399	!-- Set a barrier in order to allow that all other processors in the
	400	!-- directory created by PE0 can open their file
	401	CALL MPI_BARRIER( comm2d, ierr )
	402	#endif
[1986]	403	ioerr = 1
	404	DO WHILE ( ioerr /= 0 )
	405	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	406	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	407	IOSTAT=ioerr )
[1988]	408	IF ( ioerr /= 0 ) THEN
	409	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	410	TRIM( coupling_char )//'/'//myid_char// &
	411	'"! Trying again in 1 sec.'
	412	CALL fortran_sleep( 1 )
	413	ENDIF
[1986]	414	ENDDO
	415
[1]	416	ENDIF
	417
	418	CASE ( 21 )
	419
	420	IF ( data_output_2d_on_each_pe ) THEN
[1320]	421	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	422	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	423	ELSE
[1779]	424	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	425	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	426	ENDIF
	427
	428	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	429	!
[2512]	430	!-- Write index bounds of total domain for combine_plot_fields
[1]	431	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	432	WRITE (21) 0, nx, 0, ny
[1]	433	ENDIF
	434
	435	ENDIF
	436
	437	CASE ( 22 )
	438
	439	IF ( data_output_2d_on_each_pe ) THEN
[1320]	440	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	441	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	442	ELSE
[1779]	443	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	444	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	445	ENDIF
	446
	447	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	448	!
[2512]	449	!-- Write index bounds of total domain for combine_plot_fields
[1]	450	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	451	WRITE (22) 0, nx, 0, nz+1 ! output part
[1]	452	ENDIF
	453
	454	ENDIF
	455
	456	CASE ( 23 )
	457
	458	IF ( data_output_2d_on_each_pe ) THEN
[1320]	459	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	460	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	461	ELSE
[1779]	462	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	463	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	464	ENDIF
	465
	466	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	467	!
[2512]	468	!-- Write index bounds of total domain for combine_plot_fields
[1]	469	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	470	WRITE (23) 0, ny, 0, nz+1 ! output part
[1]	471	ENDIF
	472
	473	ENDIF
[3421]	474
	475	CASE ( 25 )
	476	!
	477	!-- Binary files for surface data
[3812]	478	! OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM( coupling_char )// &
	479	! myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
[1]	480
[3812]	481	IF ( myid_char == '' ) THEN
	482	OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM( coupling_char )// &
	483	myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
	484	ELSE
	485	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	486	CALL local_system( 'mkdir SURFACE_DATA_BIN' // &
	487	TRIM( coupling_char ) )
	488	ENDIF
	489	#if defined( __parallel )
	490	!
	491	!-- Set a barrier in order to allow that all other processors in the
	492	!-- directory created by PE0 can open their file
	493	CALL MPI_BARRIER( comm2d, ierr )
	494	#endif
	495	ioerr = 1
	496	DO WHILE ( ioerr /= 0 )
	497	OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM(coupling_char)// &
	498	'/'//myid_char, &
	499	FORM='UNFORMATTED', IOSTAT=ioerr )
	500	IF ( ioerr /= 0 ) THEN
	501	WRITE( 9, * ) '*** could not open "SURFACE_DATA_BIN'// &
	502	TRIM(coupling_char)//'/'//myid_char// &
	503	'"! Trying again in 1 sec.'
	504	CALL fortran_sleep( 1 )
	505	ENDIF
	506	ENDDO
	507
	508	ENDIF
	509
[3421]	510	CASE ( 26 )
	511	!
	512	!-- Binary files for averaged surface data
[3812]	513	! OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM( coupling_char )//myid_char, &
	514	! FORM='UNFORMATTED', POSITION='APPEND' )
	515
	516	IF ( myid_char == '' ) THEN
	517	OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM( coupling_char )// &
	518	myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
	519	ELSE
	520	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	521	CALL local_system( 'mkdir SURFACE_DATA_AV_BIN' // &
	522	TRIM( coupling_char ) )
	523	ENDIF
	524	#if defined( __parallel )
	525	!
	526	!-- Set a barrier in order to allow that all other processors in the
	527	!-- directory created by PE0 can open their file
	528	CALL MPI_BARRIER( comm2d, ierr )
	529	#endif
	530	ioerr = 1
	531	DO WHILE ( ioerr /= 0 )
	532	OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM(coupling_char)// &
	533	'/'//myid_char, &
	534	FORM='UNFORMATTED', IOSTAT=ioerr )
	535	IF ( ioerr /= 0 ) THEN
	536	WRITE( 9, * ) '*** could not open "SURFACE_DATA_AV_BIN'// &
	537	TRIM(coupling_char)//'/'//myid_char// &
	538	'"! Trying again in 1 sec.'
	539	CALL fortran_sleep( 1 )
	540	ENDIF
	541	ENDDO
	542
	543	ENDIF
	544
[3704]	545	CASE ( 27 )
	546	!
	547	!-- Binary files for virtual measurement data
[3967]	548	IF ( myid_char == '' ) THEN
	549	OPEN ( 27, FILE='VIRTUAL_MEAS_BIN'//TRIM( coupling_char )// &
	550	myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
	551	ELSE
[3421]	552
[3967]	553	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	554	CALL local_system( 'mkdir VIRTUAL_MEAS_BIN' // &
	555	TRIM( coupling_char ) )
	556	ENDIF
	557	#if defined( __parallel )
	558	!
	559	!-- Set a barrier in order to allow that all other processors in the
	560	!-- directory created by PE0 can open their file
	561	CALL MPI_BARRIER( comm2d, ierr )
	562	#endif
	563	ioerr = 1
	564	DO WHILE ( ioerr /= 0 )
	565	OPEN ( 27, FILE='VIRTUAL_MEAS_BIN'//TRIM(coupling_char)// &
	566	'/'//myid_char, &
	567	FORM='UNFORMATTED', IOSTAT=ioerr )
	568	IF ( ioerr /= 0 ) THEN
	569	WRITE( 9, * ) '*** could not open "VIRTUAL_MEAS_BIN'// &
	570	TRIM(coupling_char)//'/'//myid_char// &
	571	'"! Trying again in 1 sec.'
	572	CALL fortran_sleep( 1 )
	573	ENDIF
	574	ENDDO
	575
	576	ENDIF
	577
[1]	578	CASE ( 30 )
	579
[1320]	580	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	581	FORM='UNFORMATTED' )
[1]	582	!
[2512]	583	!-- Specifications for combine_plot_fields
[1]	584	IF ( myid == 0 ) THEN
	585	#if defined( __parallel )
[2512]	586	WRITE ( 30 ) 0, nx, 0, ny, 0, nz_do3d
[1]	587	#endif
	588	ENDIF
	589
	590	CASE ( 80 )
	591
	592	IF ( myid_char == '' ) THEN
[105]	593	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	594	FORM='FORMATTED', POSITION='APPEND' )
[1]	595	ELSE
	596	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	597	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	598	TRIM( coupling_char ) )
[1]	599	ENDIF
[1804]	600	#if defined( __parallel )
[1]	601	!
	602	!-- Set a barrier in order to allow that thereafter all other
	603	!-- processors in the directory created by PE0 can open their file.
	604	!-- WARNING: The following barrier will lead to hanging jobs, if
	605	!-- check_open is first called from routine
	606	!-- allocate_prt_memory!
	607	IF ( .NOT. openfile(80)%opened_before ) THEN
	608	CALL MPI_BARRIER( comm2d, ierr )
	609	ENDIF
	610	#endif
[1320]	611	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	612	myid_char, &
[102]	613	FORM='FORMATTED', POSITION='APPEND' )
[1]	614	ENDIF
	615
	616	IF ( .NOT. openfile(80)%opened_before ) THEN
	617	WRITE ( 80, 8000 ) TRIM( run_description_header )
	618	ENDIF
	619
	620	CASE ( 85 )
	621
	622	IF ( myid_char == '' ) THEN
[1320]	623	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	624	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	625	ELSE
	626	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	627	CALL local_system( 'mkdir PARTICLE_DATA' // &
	628	TRIM( coupling_char ) )
[1]	629	ENDIF
[1804]	630	#if defined( __parallel )
[1]	631	!
	632	!-- Set a barrier in order to allow that thereafter all other
	633	!-- processors in the directory created by PE0 can open their file
	634	CALL MPI_BARRIER( comm2d, ierr )
	635	#endif
[1986]	636	ioerr = 1
	637	DO WHILE ( ioerr /= 0 )
	638	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	639	myid_char, &
	640	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	641	IF ( ioerr /= 0 ) THEN
[2906]	642	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	643	TRIM( coupling_char )//'/'//myid_char// &
[1988]	644	'"! Trying again in 1 sec.'
	645	CALL fortran_sleep( 1 )
	646	ENDIF
[1986]	647	ENDDO
	648
[1]	649	ENDIF
	650
	651	IF ( .NOT. openfile(85)%opened_before ) THEN
	652	WRITE ( 85 ) run_description_header
	653	!
	654	!-- Attention: change version number whenever the output format on
[849]	655	!-- unit 85 is changed (see also in routine
	656	!-- lpm_data_output_particles)
[1359]	657	rtext = 'data format version 3.1'
[1]	658	WRITE ( 85 ) rtext
[1320]	659	WRITE ( 85 ) number_of_particle_groups, &
[1]	660	max_number_of_particle_groups
	661	WRITE ( 85 ) particle_groups
[1359]	662	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	663	ENDIF
	664
[2063]	665	!
[2906]	666	!-- File where sky-view factors and further required data is stored will be
	667	!-- read
	668	CASE ( 88 )
	669
	670	IF ( myid_char == '' ) THEN
	671	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//myid_char, &
	672	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	673	ELSE
	674
	675	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//'/'//myid_char, &
	676	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	677	ENDIF
	678
	679	!
	680	!-- File where sky-view factors and further required data is stored will be
	681	!-- created
	682	CASE ( 89 )
	683
	684	IF ( myid_char == '' ) THEN
	685	OPEN ( 89, FILE='SVFOUT'//TRIM( coupling_char )//myid_char, &
	686	FORM='UNFORMATTED', STATUS='NEW' )
	687	ELSE
	688	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	689	CALL local_system( 'mkdir SVFOUT' // TRIM( coupling_char ) )
	690	ENDIF
	691	#if defined( __parallel )
	692	!
	693	!-- Set a barrier in order to allow that all other processors in the
	694	!-- directory created by PE0 can open their file
	695	CALL MPI_BARRIER( comm2d, ierr )
	696	#endif
	697	ioerr = 1
	698	DO WHILE ( ioerr /= 0 )
	699	OPEN ( 89, FILE='SVFOUT'//TRIM(coupling_char)//'/'//myid_char, &
	700	FORM='UNFORMATTED', STATUS='NEW', IOSTAT=ioerr )
	701	IF ( ioerr /= 0 ) THEN
[2957]	702	WRITE( 9, * ) '*** could not open "SVFOUT'// &
	703	TRIM(coupling_char)//'/'//myid_char// &
[2906]	704	'"! Trying again in 1 sec.'
	705	CALL fortran_sleep( 1 )
	706	ENDIF
	707	ENDDO
	708
	709	ENDIF
	710
	711	!
[2063]	712	!-- Progress file that is used by the PALM watchdog
	713	CASE ( 117 )
	714
	715	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	716	STATUS='REPLACE', FORM='FORMATTED' )
	717
[1]	718	#if defined( __netcdf )
	719	CASE ( 101, 111 )
	720	!
	721	!-- Set filename depending on unit number
	722	IF ( file_id == 101 ) THEN
[1779]	723	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	724	av = 0
	725	ELSE
[1779]	726	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	727	av = 1
	728	ENDIF
	729	!
[1031]	730	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	731	!-- be opened for extension, if its dimensions and variables match the
	732	!-- actual run.
	733	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	734	IF ( netcdf_extend ) THEN
	735	!
[1031]	736	!-- Open an existing netCDF file for output
[1783]	737	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	738	!
	739	!-- Read header information and set all ids. If there is a mismatch
	740	!-- between the previuos and the actual run, netcdf_extend is returned
	741	!-- as .FALSE.
[1783]	742	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	743
	744	!
	745	!-- Remove the local file, if it can not be extended
	746	IF ( .NOT. netcdf_extend ) THEN
	747	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	748	CALL netcdf_handle_error( 'check_open', 21 )
[493]	749	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	750	#if defined( __parallel )
[1745]	751	!
	752	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	753	!-- before any other processor tries to open a new file.
	754	!-- Barrier is only needed in case of parallel I/O
	755	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	756	#endif
[1]	757	ENDIF
	758
[1745]	759	ENDIF
[1]	760
	761	IF ( .NOT. netcdf_extend ) THEN
	762	!
[1031]	763	!-- Create a new netCDF output file with requested netCDF format
[1783]	764	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	765
	766	!
[1]	767	!-- Define the header
[1783]	768	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	769
[493]	770	!
[1031]	771	!-- In case of parallel netCDF output, create flag file which tells
[493]	772	!-- combine_plot_fields that nothing is to do.
[1031]	773	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	774	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	775	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	776	CLOSE( 99 )
	777	ENDIF
	778
[1]	779	ENDIF
	780
	781	CASE ( 102, 112 )
	782	!
	783	!-- Set filename depending on unit number
	784	IF ( file_id == 102 ) THEN
[1779]	785	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	786	av = 0
	787	ELSE
[1779]	788	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	789	av = 1
	790	ENDIF
	791	!
[1031]	792	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	793	!-- be opened for extension, if its dimensions and variables match the
	794	!-- actual run.
	795	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	796
	797	IF ( netcdf_extend ) THEN
	798	!
[1031]	799	!-- Open an existing netCDF file for output
[1783]	800	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	801	!
	802	!-- Read header information and set all ids. If there is a mismatch
	803	!-- between the previuos and the actual run, netcdf_extend is returned
	804	!-- as .FALSE.
[1783]	805	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	806
	807	!
	808	!-- Remove the local file, if it can not be extended
	809	IF ( .NOT. netcdf_extend ) THEN
	810	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	811	CALL netcdf_handle_error( 'check_open', 24 )
[493]	812	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	813	#if defined( __parallel )
[1745]	814	!
	815	!-- Set a barrier in order to assure that PE0 deleted the old file
	816	!-- before any other processor tries to open a new file
[1974]	817	!-- Barrier is only needed in case of parallel I/O
	818	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	819	#endif
[1]	820	ENDIF
	821
[1745]	822	ENDIF
[1]	823
	824	IF ( .NOT. netcdf_extend ) THEN
	825	!
[1031]	826	!-- Create a new netCDF output file with requested netCDF format
[1783]	827	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	828
	829	!
[1]	830	!-- Define the header
[1783]	831	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	832
[493]	833	!
[1031]	834	!-- In case of parallel netCDF output, create flag file which tells
[493]	835	!-- combine_plot_fields that nothing is to do.
[1031]	836	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	837	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	838	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	839	CLOSE( 99 )
	840	ENDIF
	841
[1]	842	ENDIF
	843
	844	CASE ( 103, 113 )
	845	!
	846	!-- Set filename depending on unit number
	847	IF ( file_id == 103 ) THEN
[1779]	848	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	849	av = 0
	850	ELSE
[1779]	851	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	852	av = 1
	853	ENDIF
	854	!
[1031]	855	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	856	!-- be opened for extension, if its dimensions and variables match the
	857	!-- actual run.
	858	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	859
	860	IF ( netcdf_extend ) THEN
	861	!
[1031]	862	!-- Open an existing netCDF file for output
[1783]	863	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	864	!
	865	!-- Read header information and set all ids. If there is a mismatch
	866	!-- between the previuos and the actual run, netcdf_extend is returned
	867	!-- as .FALSE.
[1783]	868	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	869
	870	!
	871	!-- Remove the local file, if it can not be extended
	872	IF ( .NOT. netcdf_extend ) THEN
	873	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	874	CALL netcdf_handle_error( 'check_open', 27 )
[493]	875	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	876	#if defined( __parallel )
[1745]	877	!
	878	!-- Set a barrier in order to assure that PE0 deleted the old file
	879	!-- before any other processor tries to open a new file
[1974]	880	!-- Barrier is only needed in case of parallel I/O
	881	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	882	#endif
[1]	883	ENDIF
	884
[1745]	885	ENDIF
[1]	886
	887	IF ( .NOT. netcdf_extend ) THEN
	888	!
[1031]	889	!-- Create a new netCDF output file with requested netCDF format
[1783]	890	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	891
	892	!
[1]	893	!-- Define the header
[1783]	894	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	895
[493]	896	!
[1031]	897	!-- In case of parallel netCDF output, create flag file which tells
[493]	898	!-- combine_plot_fields that nothing is to do.
[1031]	899	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	900	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	901	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	902	CLOSE( 99 )
	903	ENDIF
	904
[1]	905	ENDIF
	906
	907	CASE ( 104 )
	908	!
[102]	909	!-- Set filename
[1779]	910	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	911
	912	!
[1031]	913	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	914	!-- be opened for extension, if its variables match the actual run.
[102]	915	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	916
	917	IF ( netcdf_extend ) THEN
	918	!
[1031]	919	!-- Open an existing netCDF file for output
[1783]	920	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	921	!
	922	!-- Read header information and set all ids. If there is a mismatch
	923	!-- between the previuos and the actual run, netcdf_extend is returned
	924	!-- as .FALSE.
[1783]	925	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	926
	927	!
	928	!-- Remove the local file, if it can not be extended
	929	IF ( .NOT. netcdf_extend ) THEN
	930	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	931	CALL netcdf_handle_error( 'check_open', 30 )
[102]	932	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	933	ENDIF
	934
	935	ENDIF
	936
	937	IF ( .NOT. netcdf_extend ) THEN
	938	!
[1031]	939	!-- Create a new netCDF output file with requested netCDF format
[1783]	940	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	941	!
	942	!-- Define the header
[1783]	943	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	944
	945	ENDIF
	946
	947	CASE ( 105 )
	948	!
[102]	949	!-- Set filename
[1779]	950	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	951
	952	!
[1031]	953	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	954	!-- be opened for extension, if its variables match the actual run.
[102]	955	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	956
	957	IF ( netcdf_extend ) THEN
	958	!
[1031]	959	!-- Open an existing netCDF file for output
[1783]	960	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	961	!
	962	!-- Read header information and set all ids. If there is a mismatch
	963	!-- between the previuos and the actual run, netcdf_extend is returned
	964	!-- as .FALSE.
[1783]	965	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	966
	967	!
	968	!-- Remove the local file, if it can not be extended
	969	IF ( .NOT. netcdf_extend ) THEN
	970	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	971	CALL netcdf_handle_error( 'check_open', 33 )
[102]	972	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	973	ENDIF
	974
	975	ENDIF
	976
	977	IF ( .NOT. netcdf_extend ) THEN
	978	!
[1031]	979	!-- Create a new netCDF output file with requested netCDF format
[1783]	980	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	981	!
	982	!-- Define the header
[1783]	983	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	984
	985	ENDIF
	986
	987
	988	CASE ( 106, 116 )
	989	!
	990	!-- Set filename depending on unit number
	991	IF ( file_id == 106 ) THEN
[1779]	992	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	993	av = 0
	994	ELSE
[1779]	995	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	996	av = 1
	997	ENDIF
	998	!
[1031]	999	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	1000	!-- be opened for extension, if its dimensions and variables match the
	1001	!-- actual run.
	1002	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1003	IF ( netcdf_extend ) THEN
	1004	!
[1031]	1005	!-- Open an existing netCDF file for output
[1783]	1006	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	1007	!
	1008	!-- Read header information and set all ids. If there is a mismatch
	1009	!-- between the previuos and the actual run, netcdf_extend is returned
	1010	!-- as .FALSE.
[1783]	1011	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	1012
	1013	!
	1014	!-- Remove the local file, if it can not be extended
	1015	IF ( .NOT. netcdf_extend ) THEN
	1016	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	1017	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	1018	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	1019	#if defined( __parallel )
[1745]	1020	!
	1021	!-- Set a barrier in order to assure that PE0 deleted the old file
	1022	!-- before any other processor tries to open a new file
[1974]	1023	!-- Barrier is only needed in case of parallel I/O
	1024	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	1025	#endif
[1]	1026	ENDIF
	1027
[1745]	1028	ENDIF
[1]	1029
	1030	IF ( .NOT. netcdf_extend ) THEN
	1031	!
[1031]	1032	!-- Create a new netCDF output file with requested netCDF format
[1783]	1033	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	1034
	1035	!
[1]	1036	!-- Define the header
[1783]	1037	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	1038
[493]	1039	!
[1031]	1040	!-- In case of parallel netCDF output, create flag file which tells
[493]	1041	!-- combine_plot_fields that nothing is to do.
[1031]	1042	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	1043	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1044	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1045	CLOSE( 99 )
	1046	ENDIF
	1047
[1]	1048	ENDIF
	1049
	1050
	1051	CASE ( 107 )
	1052	!
[102]	1053	!-- Set filename
[1779]	1054	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	1055
	1056	!
[1031]	1057	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1058	!-- be opened for extension, if its variables match the actual run.
[102]	1059	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1060
	1061	IF ( netcdf_extend ) THEN
	1062	!
[1031]	1063	!-- Open an existing netCDF file for output
[1783]	1064	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	1065
[1]	1066	!
	1067	!-- Read header information and set all ids. If there is a mismatch
	1068	!-- between the previuos and the actual run, netcdf_extend is returned
	1069	!-- as .FALSE.
[1783]	1070	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1071
	1072	!
	1073	!-- Remove the local file, if it can not be extended
	1074	IF ( .NOT. netcdf_extend ) THEN
	1075	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	1076	CALL netcdf_handle_error( 'check_open', 39 )
[102]	1077	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1078	ENDIF
	1079
	1080	ENDIF
	1081
	1082	IF ( .NOT. netcdf_extend ) THEN
	1083	!
[1031]	1084	!-- Create a new netCDF output file with requested netCDF format
[1783]	1085	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	1086	!
	1087	!-- Define the header
[1783]	1088	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1089
	1090	ENDIF
	1091
[3045]	1092	!
	1093	!-- Currently disabled
	1094	! CASE ( 108 )
[1]	1095
[3045]	1096	! IF ( myid_char == '' ) THEN
	1097	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
	1098	! ELSE
	1099	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1100	! myid_char
	1101	! ENDIF
[1]	1102	!
[1031]	1103	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1104	!-- be opened for extension, if its variables match the actual run.
[3045]	1105	! INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1106
[3045]	1107	! IF ( netcdf_extend ) THEN
[1]	1108	!
[1031]	1109	!-- Open an existing netCDF file for output
[3045]	1110	! CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	1111	!
	1112	!-- Read header information and set all ids. If there is a mismatch
	1113	!-- between the previuos and the actual run, netcdf_extend is returned
	1114	!-- as .FALSE.
[3045]	1115	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1116
	1117	!
	1118	!-- Remove the local file, if it can not be extended
[3045]	1119	! IF ( .NOT. netcdf_extend ) THEN
	1120	! nc_stat = NF90_CLOSE( id_set_prt )
	1121	! CALL netcdf_handle_error( 'check_open', 42 )
	1122	! CALL local_system( 'rm ' // TRIM( filename ) )
	1123	! ENDIF
[1]	1124
[3045]	1125	! ENDIF
[1]	1126
[3045]	1127	! IF ( .NOT. netcdf_extend ) THEN
[1]	1128
	1129	!
	1130	!-- For runs on multiple processors create the subdirectory
[3045]	1131	! IF ( myid_char /= '' ) THEN
	1132	! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1133	! THEN ! needs modification in case of non-extendable sets
	1134	! CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
	1135	! TRIM( coupling_char ) // '/' )
	1136	! ENDIF
[1804]	1137	#if defined( __parallel )
[807]	1138	!
[1]	1139	!-- Set a barrier in order to allow that all other processors in the
	1140	!-- directory created by PE0 can open their file
[3045]	1141	! CALL MPI_BARRIER( comm2d, ierr )
[1]	1142	#endif
[3045]	1143	! ENDIF
[1]	1144
	1145	!
[1031]	1146	!-- Create a new netCDF output file with requested netCDF format
[3045]	1147	! CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1148
	1149	!
[1]	1150	!-- Define the header
[3045]	1151	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1152
[3045]	1153	! ENDIF
[1]	1154
	1155	CASE ( 109 )
	1156	!
[102]	1157	!-- Set filename
[1779]	1158	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1159
	1160	!
[1031]	1161	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1162	!-- be opened for extension, if its variables match the actual run.
[102]	1163	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1164
	1165	IF ( netcdf_extend ) THEN
	1166	!
[1031]	1167	!-- Open an existing netCDF file for output
[1783]	1168	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1169	!
	1170	!-- Read header information and set all ids. If there is a mismatch
	1171	!-- between the previuos and the actual run, netcdf_extend is returned
	1172	!-- as .FALSE.
[1783]	1173	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1174
	1175	!
	1176	!-- Remove the local file, if it can not be extended
	1177	IF ( .NOT. netcdf_extend ) THEN
	1178	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1179	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1180	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1181	ENDIF
	1182
	1183	ENDIF
	1184
	1185	IF ( .NOT. netcdf_extend ) THEN
	1186	!
[1031]	1187	!-- Create a new netCDF output file with requested netCDF format
[1783]	1188	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1189	!
	1190	!-- Define the header
[1783]	1191	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1192
	1193	ENDIF
[410]	1194
[3159]	1195	CASE ( 118 )
	1196
	1197	IF ( myid == 0 ) THEN
	1198	filename = 'DATA_AGT_NETCDF'
[1468]	1199	!
[3159]	1200	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1201	!-- be opened for extension, if its variables match the actual run.
	1202	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1203
	1204	!
	1205	!-- Create a new netCDF output file with requested netCDF format
	1206	CALL netcdf_create_file( filename, id_set_agt, .FALSE., 43 )
	1207
	1208	!
	1209	!-- Define the header
	1210	CALL netcdf_define_header( 'ag', netcdf_extend, 0 )
	1211	ENDIF
	1212
	1213	! IF ( netcdf_extend ) THEN
	1214	! !
	1215	! !-- Open an existing netCDF file for output
	1216	! CALL netcdf_open_write_file( filename, id_set_agt, .FALSE., 41 )
	1217	! !
	1218	! !-- Read header information and set all ids. If there is a mismatch
	1219	! !-- between the previuos and the actual run, netcdf_extend is returned
	1220	! !-- as .FALSE.
	1221	! CALL netcdf_define_header( 'ag', netcdf_extend, 0 )
	1222	!
	1223	! !
	1224	! !-- Remove the local file, if it can not be extended
	1225	! IF ( .NOT. netcdf_extend ) THEN
	1226	! nc_stat = NF90_CLOSE( id_set_agt )
	1227	! CALL netcdf_handle_error( 'check_open', 42 )
	1228	! CALL local_system( 'rm ' // TRIM( filename ) )
	1229	! ENDIF
	1230	!
	1231	! ENDIF
	1232
	1233	IF ( .NOT. netcdf_extend ) THEN
	1234
	1235	!
	1236	! !-- For runs on multiple processors create the subdirectory
	1237	! IF ( myid_char /= '' ) THEN
	1238	! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1239	! THEN ! needs modification in case of non-extendable sets
	1240	! CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
	1241	! TRIM( coupling_char ) // '/' )
	1242	! ENDIF
	1243	! #if defined( __parallel )
	1244	! !
	1245	! !-- Set a barrier in order to allow that all other processors in the
	1246	! !-- directory created by PE0 can open their file
	1247	! CALL MPI_BARRIER( comm2d, ierr )
	1248	! #endif
	1249	! ENDIF
	1250
	1251	ENDIF
	1252
[3421]	1253
[3159]	1254	!
[1957]	1255	!-- nc-file for virtual flight measurements
	1256	CASE ( 199 )
	1257	!
	1258	!-- Set filename
	1259	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1260
[1957]	1261	!
	1262	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1263	!-- be opened for extension, if its variables match the actual run.
	1264	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1265
[1957]	1266	IF ( netcdf_extend ) THEN
	1267	!
	1268	!-- Open an existing netCDF file for output
	1269	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1270	!
	1271	!-- Read header information and set all ids. If there is a mismatch
	1272	!-- between the previuos and the actual run, netcdf_extend is returned
	1273	!-- as .FALSE.
	1274	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1275
	1276	!
	1277	!-- Remove the local file, if it can not be extended
	1278	IF ( .NOT. netcdf_extend ) THEN
	1279	nc_stat = NF90_CLOSE( id_set_fl )
	1280	CALL netcdf_handle_error( 'check_open', 533 )
	1281	CALL local_system( 'rm ' // TRIM( filename ) )
	1282	ENDIF
	1283
	1284	ENDIF
	1285
	1286	IF ( .NOT. netcdf_extend ) THEN
	1287	!
	1288	!-- Create a new netCDF output file with requested netCDF format
	1289	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1290	!
	1291	!-- Define the header
	1292	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1293
	1294	ENDIF
	1295
	1296
[564]	1297	CASE ( 201:200+2*max_masks )
[410]	1298	!
	1299	!-- Set filename depending on unit number
[564]	1300	IF ( file_id <= 200+max_masks ) THEN
	1301	mid = file_id - 200
[2669]	1302	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1303	filename = 'DATA_MASK_NETCDF' // TRIM( coupling_char ) // &
	1304	mask_char
[410]	1305	av = 0
	1306	ELSE
[564]	1307	mid = file_id - (200+max_masks)
[2669]	1308	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1309	filename = 'DATA_MASK_AV_NETCDF' // TRIM( coupling_char ) // &
	1310	mask_char
[410]	1311	av = 1
	1312	ENDIF
	1313	!
[1031]	1314	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1315	!-- be opened for extension, if its dimensions and variables match the
	1316	!-- actual run.
	1317	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1318
	1319	IF ( netcdf_extend ) THEN
	1320	!
[1031]	1321	!-- Open an existing netCDF file for output
[1783]	1322	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1323	.TRUE., 456 )
[410]	1324	!
	1325	!-- Read header information and set all ids. If there is a mismatch
	1326	!-- between the previuos and the actual run, netcdf_extend is returned
	1327	!-- as .FALSE.
[1783]	1328	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1329
[410]	1330	!
	1331	!-- Remove the local file, if it can not be extended
	1332	IF ( .NOT. netcdf_extend ) THEN
	1333	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1334	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1335	CALL local_system('rm ' // TRIM( filename ) )
	1336	ENDIF
[1]	1337
[410]	1338	ENDIF
	1339
	1340	IF ( .NOT. netcdf_extend ) THEN
[1]	1341	!
[1031]	1342	!-- Create a new netCDF output file with requested netCDF format
[1783]	1343	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1344	!
[410]	1345	!-- Define the header
[1783]	1346	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1347
	1348	ENDIF
	1349
	1350
	1351	#else
	1352
[564]	1353	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1354
	1355	!
[1]	1356	!-- Nothing is done in case of missing netcdf support
	1357	RETURN
	1358
	1359	#endif
	1360
	1361	CASE DEFAULT
	1362
[247]	1363	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1364	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1365
	1366	END SELECT
	1367
	1368	!
	1369	!-- Set open flag
	1370	openfile(file_id)%opened = .TRUE.
	1371
	1372	!
	1373	!-- Formats
[1320]	1374	8000 FORMAT (A/ &
[1359]	1375	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1376	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1377	109('-'))
[1]	1378
	1379	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |