Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 3930

Last change on this file since 3930 was 3812, checked in by gronemeier, 6 years ago
Open binary surface output data within separate folder
Property svn:keywords set to `Id`
File size: 47.7 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[2696]	14	! You should have received a copy of the GNU General Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[3655]	17	! Copyright 1997-2019 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[3705]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 3812 2019-03-25 07:10:12Z forkel $
[3812]	27	! Open binary surface output data within separate folder
	28	!
	29	! 3705 2019-01-29 19:56:39Z suehring
[3705]	30	! Open binary files for virtual measurements
	31	!
	32	! 3704 2019-01-29 19:51:41Z suehring
[3421]	33	! Open files for surface data
	34	!
	35	! 3399 2018-10-22 20:13:45Z gronemeier
[3241]	36	! unused variables and format statements removed
	37	!
	38	! 3159 2018-07-20 11:20:01Z sward
[3159]	39	! Added multi agent system
	40	!
	41	! 3045 2018-05-28 07:55:41Z Giersch
[3045]	42	! Output case 108 disabled
	43	!
	44	! 2964 2018-04-12 16:04:03Z Giersch
[2964]	45	! Error message moved to radiation_model_mod
	46	!
	47	! 2957 2018-04-11 08:48:06Z Giersch
[2957]	48	! Error message has been corrected in case of writing sky view factors
	49	!
	50	! 2906 2018-03-19 08:56:40Z Giersch
[2906]	51	! CASE 88 and 89 has been added for the input/output of sky view factors
	52	!
	53	! 2718 2018-01-02 08:49:38Z maronga
[2716]	54	! Corrected "Former revisions" section
	55	!
	56	! 2696 2017-12-14 17:12:51Z kanani
	57	! Change in file header (GPL part)
	58	!
	59	! 2669 2017-12-06 16:03:27Z raasch
[2669]	60	! file name extension for masked data files is changed to "_M##" and is now
	61	! appended at the end of the filename,
	62	! file ids not used any more have been removed
	63	!
	64	! 2516 2017-10-04 11:03:04Z suehring
[2516]	65	! Remove tabs
	66	!
	67	! 2514 2017-10-04 09:52:37Z suehring
[2512]	68	! upper bounds of cross section and 3d output changed from nx+1,ny+1 to nx,ny
	69	! no output of ghost layer data
	70	! iso2d-related parts removed
	71	!
	72	! 2300 2017-06-29 13:31:14Z raasch
[2300]	73	! -host
	74	!
	75	! 2298 2017-06-29 09:28:18Z raasch
[2298]	76	! -return_addres, return_username, avs_coor_file_..., avs_data_file_...,
	77	! cross_ts_numbers, cross_ts_number_count
[1321]	78	!
[2298]	79	! 2101 2017-01-05 16:42:31Z suehring
	80	!
[2064]	81	! 2063 2016-11-10 17:14:35Z raasch
	82	! bugfix: opening of PROGRESS file moved out of the NetCDF block
	83	!
[2041]	84	! 2040 2016-10-26 16:58:09Z gronemeier
[2040]	85	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
	86	!
[2001]	87	! 2000 2016-08-20 18:09:15Z knoop
	88	! Forced header and separation lines into 80 columns
	89	!
[1989]	90	! 1988 2016-08-10 14:49:06Z gronemeier
	91	! informative message added if files cannot be opened in newly created directory
	92	!
[1987]	93	! 1986 2016-08-10 14:07:17Z gronemeier
	94	! Bugfix: check if output can be opened in newly created directory. If not
	95	! wait one second and try again.
	96	!
[1975]	97	! 1974 2016-07-26 08:43:25Z gronemeier
	98	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	99	! in case of parallel I/O
	100	!
[1958]	101	! 1957 2016-07-07 10:43:48Z suehring
	102	! flight module added
	103	!
[1805]	104	! 1804 2016-04-05 16:30:18Z maronga
	105	! Removed code for parameter file check (__check)
	106	!
[1784]	107	! 1783 2016-03-06 18:36:17Z raasch
	108	! name change of netcdf routines and module + related changes
	109	!
[1780]	110	! 1779 2016-03-03 08:01:28Z raasch
	111	! coupling_char is trimmed at every place it occurs, because it can have
	112	! different length now
	113	!
[1746]	114	! 1745 2016-02-05 13:06:51Z gronemeier
	115	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	116	!
[1683]	117	! 1682 2015-10-07 23:56:08Z knoop
	118	! Code annotations made doxygen readable
	119	!
[1552]	120	! 1551 2015-03-03 14:18:16Z maronga
	121	! Removed redundant output for combine_plot_fields
	122	!
[1469]	123	! 1468 2014-09-24 14:06:57Z maronga
	124	! Adapted for use on up to 6-digit processor cores
	125	! Added file unit 117 (PROGRESS)
	126	!
[1360]	127	! 1359 2014-04-11 17:15:14Z hoffmann
	128	! Format of particle exchange statistics extended to reasonable numbers of
	129	! particles.
	130	!
[1354]	131	! 1353 2014-04-08 15:21:23Z heinze
	132	! REAL constants provided with KIND-attribute,
	133	! declaration for unused variables xkoor, ykoor, zkoor removed
	134	!
[1329]	135	! 1327 2014-03-21 11:00:16Z raasch
	136	! parts concerning iso2d and avs output removed
	137	!
[1321]	138	! 1320 2014-03-20 08:40:49Z raasch
[1320]	139	! ONLY-attribute added to USE-statements,
	140	! kind-parameters added to all INTEGER and REAL declaration statements,
	141	! kinds are defined in new module kinds,
	142	! old module precision_kind is removed,
	143	! revision history before 2012 removed,
	144	! comment fields (!:) to be used for variable explanations added to
	145	! all variable declaration statements
[1]	146	!
[1107]	147	! 1106 2013-03-04 05:31:38Z raasch
	148	! array_kind renamed precision_kind
	149	!
[1093]	150	! 1092 2013-02-02 11:24:22Z raasch
	151	! unused variables removed
	152	!
[1037]	153	! 1036 2012-10-22 13:43:42Z raasch
	154	! code put under GPL (PALM 3.9)
	155	!
[1035]	156	! 1031 2012-10-19 14:35:30Z raasch
	157	! netCDF4 without parallel file support implemented,
	158	! opening of netCDF files are done by new routines create_netcdf_file and
	159	! open_write_netcdf_file
	160	!
[965]	161	! 964 2012-07-26 09:14:24Z raasch
	162	! old profil-units (40:49) removed,
	163	! append feature removed from unit 14
	164	!
[850]	165	! 849 2012-03-15 10:35:09Z raasch
	166	! comment changed
	167	!
[810]	168	! 809 2012-01-30 13:32:58Z maronga
	169	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	170	!
[808]	171	! 807 2012-01-25 11:53:51Z maronga
	172	! New cpp directive "__check" implemented which is used by check_namelist_files
	173	!
[1]	174	! Revision 1.1 1997/08/11 06:10:55 raasch
	175	! Initial revision
	176	!
	177	!
	178	! Description:
	179	! ------------
[1682]	180	!> Check if file unit is open. If not, open file and, if necessary, write a
	181	!> header or start other initializing actions, respectively.
[1]	182	!------------------------------------------------------------------------------!
[1682]	183	SUBROUTINE check_open( file_id )
	184
[1]	185
[1320]	186	USE control_parameters, &
[2964]	187	ONLY: coupling_char, data_output_2d_on_each_pe, &
	188	max_masks, message_string, mid, nz_do3d, openfile, &
[3241]	189	run_description_header
[1320]	190
	191	USE indices, &
[3241]	192	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nys, nz, nzb, nzt
[1320]	193
	194	USE kinds
	195
[1783]	196	#if defined( __netcdf )
	197	USE NETCDF
	198	#endif
[1320]	199
[1783]	200	USE netcdf_interface, &
[3241]	201	ONLY: id_set_agt, id_set_fl, id_set_mask, id_set_pr, &
[3159]	202	id_set_pts, id_set_sp, id_set_ts, id_set_xy, id_set_xz, &
	203	id_set_yz, id_set_3d, nc_stat, netcdf_create_file, &
	204	netcdf_data_format, netcdf_define_header, netcdf_handle_error, &
	205	netcdf_open_write_file
[1783]	206
[1320]	207	USE particle_attributes, &
	208	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	209	particle_groups
	210
[1]	211	USE pegrid
	212
[1986]	213	USE posix_calls_from_fortran, &
	214	ONLY: fortran_sleep
	215
[1320]	216
[1]	217	IMPLICIT NONE
	218
[2669]	219	CHARACTER (LEN=4) :: mask_char !<
[1682]	220	CHARACTER (LEN=30) :: filename !<
	221	CHARACTER (LEN=80) :: rtext !<
[1]	222
[1682]	223	INTEGER(iwp) :: av !<
	224	INTEGER(iwp) :: file_id !<
[1986]	225	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[1320]	226
[2512]	227	LOGICAL :: netcdf_extend !<
[1]	228
	229	!
	230	!-- Immediate return if file already open
	231	IF ( openfile(file_id)%opened ) RETURN
	232
	233	!
	234	!-- Only certain files are allowed to be re-opened
	235	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	236	!-- has not been checked so far, if it works!
	237	IF ( openfile(file_id)%opened_before ) THEN
	238	SELECT CASE ( file_id )
[2669]	239	CASE ( 13, 14, 21, 22, 23, 80, 85, 117 )
[1]	240	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	241	message_string = 're-open of unit ' // &
[274]	242	'14 is not verified. Please check results!'
[247]	243	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	244	ENDIF
[143]	245
[1]	246	CASE DEFAULT
[1320]	247	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	248	' is not allowed'
[247]	249	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	250
[1]	251	RETURN
[143]	252
[1]	253	END SELECT
	254	ENDIF
	255
	256	!
	257	!-- Check if file may be opened on the relevant PE
	258	SELECT CASE ( file_id )
	259
[2669]	260	CASE ( 15, 16, 17, 18, 19, 50:59, 104:105, 107, 109, 117 )
[2514]	261
[493]	262	IF ( myid /= 0 ) THEN
[1320]	263	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	264	' not allowed for PE ',myid
	265	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	266	ENDIF
	267
[564]	268	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	269
[1031]	270	IF ( netcdf_data_format < 5 ) THEN
[247]	271
[410]	272	IF ( myid /= 0 ) THEN
[1320]	273	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	274	' not allowed for PE ',myid
	275	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	276	ENDIF
[2514]	277
[493]	278	ENDIF
[1]	279
	280	CASE ( 21, 22, 23 )
	281
	282	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	283	IF ( myid /= 0 ) THEN
[1320]	284	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	285	' not allowed for PE ',myid
[277]	286	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	287	END IF
[1]	288	ENDIF
	289
[2669]	290	CASE ( 90:99 )
[1]	291
	292	!
	293	!-- File-ids that are used temporarily in other routines
[1320]	294	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	295	' is not allowed since it is used otherwise'
[247]	296	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	297
[1]	298	END SELECT
	299
	300	!
	301	!-- Open relevant files
	302	SELECT CASE ( file_id )
	303
	304	CASE ( 11 )
	305
[1779]	306	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
[102]	307	STATUS='OLD' )
[1]	308
	309	CASE ( 13 )
	310
	311	IF ( myid_char == '' ) THEN
[1779]	312	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	313	FORM='UNFORMATTED', STATUS='OLD' )
[1]	314	ELSE
[143]	315	!
[1468]	316	!-- First opening of unit 13 openes file _000000 on all PEs because
	317	!-- only this file contains the global variables
[143]	318	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	319	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	320	FORM='UNFORMATTED', STATUS='OLD' )
	321	ELSE
[1779]	322	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	323	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	324	ENDIF
[1]	325	ENDIF
	326
	327	CASE ( 14 )
	328
	329	IF ( myid_char == '' ) THEN
[1779]	330	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	331	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	332	ELSE
	333	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	334	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	335	ENDIF
[1804]	336	#if defined( __parallel )
[1]	337	!
	338	!-- Set a barrier in order to allow that all other processors in the
	339	!-- directory created by PE0 can open their file
	340	CALL MPI_BARRIER( comm2d, ierr )
	341	#endif
[1986]	342	ioerr = 1
	343	DO WHILE ( ioerr /= 0 )
	344	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	345	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	346	IF ( ioerr /= 0 ) THEN
	347	WRITE( 9, * ) '*** could not open "BINOUT'// &
	348	TRIM(coupling_char)//'/'//myid_char// &
	349	'"! Trying again in 1 sec.'
	350	CALL fortran_sleep( 1 )
	351	ENDIF
[1986]	352	ENDDO
	353
[1]	354	ENDIF
	355
	356	CASE ( 15 )
	357
[1779]	358	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	359	FORM='FORMATTED' )
[1]	360
	361	CASE ( 16 )
	362
[1779]	363	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	364	FORM='FORMATTED' )
[1]	365
	366	CASE ( 17 )
	367
[1779]	368	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	369	FORM='FORMATTED' )
[1]	370
	371	CASE ( 18 )
	372
[1779]	373	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	374	FORM='FORMATTED' )
[1]	375
	376	CASE ( 19 )
	377
[1779]	378	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	379
	380	CASE ( 20 )
	381
	382	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	383	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	384	ENDIF
	385	IF ( myid_char == '' ) THEN
[1779]	386	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	387	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	388	ELSE
[1804]	389	#if defined( __parallel )
[1]	390	!
	391	!-- Set a barrier in order to allow that all other processors in the
	392	!-- directory created by PE0 can open their file
	393	CALL MPI_BARRIER( comm2d, ierr )
	394	#endif
[1986]	395	ioerr = 1
	396	DO WHILE ( ioerr /= 0 )
	397	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	398	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	399	IOSTAT=ioerr )
[1988]	400	IF ( ioerr /= 0 ) THEN
	401	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	402	TRIM( coupling_char )//'/'//myid_char// &
	403	'"! Trying again in 1 sec.'
	404	CALL fortran_sleep( 1 )
	405	ENDIF
[1986]	406	ENDDO
	407
[1]	408	ENDIF
	409
	410	CASE ( 21 )
	411
	412	IF ( data_output_2d_on_each_pe ) THEN
[1320]	413	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	414	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	415	ELSE
[1779]	416	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	417	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	418	ENDIF
	419
	420	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	421	!
[2512]	422	!-- Write index bounds of total domain for combine_plot_fields
[1]	423	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	424	WRITE (21) 0, nx, 0, ny
[1]	425	ENDIF
	426
	427	ENDIF
	428
	429	CASE ( 22 )
	430
	431	IF ( data_output_2d_on_each_pe ) THEN
[1320]	432	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	433	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	434	ELSE
[1779]	435	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	436	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	437	ENDIF
	438
	439	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	440	!
[2512]	441	!-- Write index bounds of total domain for combine_plot_fields
[1]	442	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	443	WRITE (22) 0, nx, 0, nz+1 ! output part
[1]	444	ENDIF
	445
	446	ENDIF
	447
	448	CASE ( 23 )
	449
	450	IF ( data_output_2d_on_each_pe ) THEN
[1320]	451	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	452	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	453	ELSE
[1779]	454	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	455	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	456	ENDIF
	457
	458	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	459	!
[2512]	460	!-- Write index bounds of total domain for combine_plot_fields
[1]	461	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	462	WRITE (23) 0, ny, 0, nz+1 ! output part
[1]	463	ENDIF
	464
	465	ENDIF
[3421]	466
	467	CASE ( 25 )
	468	!
	469	!-- Binary files for surface data
[3812]	470	! OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM( coupling_char )// &
	471	! myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
[1]	472
[3812]	473	IF ( myid_char == '' ) THEN
	474	OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM( coupling_char )// &
	475	myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
	476	ELSE
	477	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	478	CALL local_system( 'mkdir SURFACE_DATA_BIN' // &
	479	TRIM( coupling_char ) )
	480	ENDIF
	481	#if defined( __parallel )
	482	!
	483	!-- Set a barrier in order to allow that all other processors in the
	484	!-- directory created by PE0 can open their file
	485	CALL MPI_BARRIER( comm2d, ierr )
	486	#endif
	487	ioerr = 1
	488	DO WHILE ( ioerr /= 0 )
	489	OPEN ( 25, FILE='SURFACE_DATA_BIN'//TRIM(coupling_char)// &
	490	'/'//myid_char, &
	491	FORM='UNFORMATTED', IOSTAT=ioerr )
	492	IF ( ioerr /= 0 ) THEN
	493	WRITE( 9, * ) '*** could not open "SURFACE_DATA_BIN'// &
	494	TRIM(coupling_char)//'/'//myid_char// &
	495	'"! Trying again in 1 sec.'
	496	CALL fortran_sleep( 1 )
	497	ENDIF
	498	ENDDO
	499
	500	ENDIF
	501
[3421]	502	CASE ( 26 )
	503	!
	504	!-- Binary files for averaged surface data
[3812]	505	! OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM( coupling_char )//myid_char, &
	506	! FORM='UNFORMATTED', POSITION='APPEND' )
	507
	508	IF ( myid_char == '' ) THEN
	509	OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM( coupling_char )// &
	510	myid_char, FORM='UNFORMATTED', POSITION='APPEND' )
	511	ELSE
	512	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	513	CALL local_system( 'mkdir SURFACE_DATA_AV_BIN' // &
	514	TRIM( coupling_char ) )
	515	ENDIF
	516	#if defined( __parallel )
	517	!
	518	!-- Set a barrier in order to allow that all other processors in the
	519	!-- directory created by PE0 can open their file
	520	CALL MPI_BARRIER( comm2d, ierr )
	521	#endif
	522	ioerr = 1
	523	DO WHILE ( ioerr /= 0 )
	524	OPEN ( 26, FILE='SURFACE_DATA_AV_BIN'//TRIM(coupling_char)// &
	525	'/'//myid_char, &
	526	FORM='UNFORMATTED', IOSTAT=ioerr )
	527	IF ( ioerr /= 0 ) THEN
	528	WRITE( 9, * ) '*** could not open "SURFACE_DATA_AV_BIN'// &
	529	TRIM(coupling_char)//'/'//myid_char// &
	530	'"! Trying again in 1 sec.'
	531	CALL fortran_sleep( 1 )
	532	ENDIF
	533	ENDDO
	534
	535	ENDIF
	536
[3704]	537	CASE ( 27 )
	538	!
	539	!-- Binary files for virtual measurement data
	540	OPEN ( 27, FILE='VIRTUAL_MEAS_BIN'//TRIM( coupling_char )//myid_char,&
	541	FORM='UNFORMATTED', POSITION='APPEND' )
[3421]	542
[1]	543	CASE ( 30 )
	544
[1320]	545	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	546	FORM='UNFORMATTED' )
[1]	547	!
[2512]	548	!-- Specifications for combine_plot_fields
[1]	549	IF ( myid == 0 ) THEN
	550	#if defined( __parallel )
[2512]	551	WRITE ( 30 ) 0, nx, 0, ny, 0, nz_do3d
[1]	552	#endif
	553	ENDIF
	554
	555	CASE ( 80 )
	556
	557	IF ( myid_char == '' ) THEN
[105]	558	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	559	FORM='FORMATTED', POSITION='APPEND' )
[1]	560	ELSE
	561	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	562	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	563	TRIM( coupling_char ) )
[1]	564	ENDIF
[1804]	565	#if defined( __parallel )
[1]	566	!
	567	!-- Set a barrier in order to allow that thereafter all other
	568	!-- processors in the directory created by PE0 can open their file.
	569	!-- WARNING: The following barrier will lead to hanging jobs, if
	570	!-- check_open is first called from routine
	571	!-- allocate_prt_memory!
	572	IF ( .NOT. openfile(80)%opened_before ) THEN
	573	CALL MPI_BARRIER( comm2d, ierr )
	574	ENDIF
	575	#endif
[1320]	576	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	577	myid_char, &
[102]	578	FORM='FORMATTED', POSITION='APPEND' )
[1]	579	ENDIF
	580
	581	IF ( .NOT. openfile(80)%opened_before ) THEN
	582	WRITE ( 80, 8000 ) TRIM( run_description_header )
	583	ENDIF
	584
	585	CASE ( 85 )
	586
	587	IF ( myid_char == '' ) THEN
[1320]	588	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	589	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	590	ELSE
	591	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	592	CALL local_system( 'mkdir PARTICLE_DATA' // &
	593	TRIM( coupling_char ) )
[1]	594	ENDIF
[1804]	595	#if defined( __parallel )
[1]	596	!
	597	!-- Set a barrier in order to allow that thereafter all other
	598	!-- processors in the directory created by PE0 can open their file
	599	CALL MPI_BARRIER( comm2d, ierr )
	600	#endif
[1986]	601	ioerr = 1
	602	DO WHILE ( ioerr /= 0 )
	603	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	604	myid_char, &
	605	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	606	IF ( ioerr /= 0 ) THEN
[2906]	607	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	608	TRIM( coupling_char )//'/'//myid_char// &
[1988]	609	'"! Trying again in 1 sec.'
	610	CALL fortran_sleep( 1 )
	611	ENDIF
[1986]	612	ENDDO
	613
[1]	614	ENDIF
	615
	616	IF ( .NOT. openfile(85)%opened_before ) THEN
	617	WRITE ( 85 ) run_description_header
	618	!
	619	!-- Attention: change version number whenever the output format on
[849]	620	!-- unit 85 is changed (see also in routine
	621	!-- lpm_data_output_particles)
[1359]	622	rtext = 'data format version 3.1'
[1]	623	WRITE ( 85 ) rtext
[1320]	624	WRITE ( 85 ) number_of_particle_groups, &
[1]	625	max_number_of_particle_groups
	626	WRITE ( 85 ) particle_groups
[1359]	627	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	628	ENDIF
	629
[2063]	630	!
[2906]	631	!-- File where sky-view factors and further required data is stored will be
	632	!-- read
	633	CASE ( 88 )
	634
	635	IF ( myid_char == '' ) THEN
	636	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//myid_char, &
	637	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	638	ELSE
	639
	640	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//'/'//myid_char, &
	641	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	642	ENDIF
	643
	644	!
	645	!-- File where sky-view factors and further required data is stored will be
	646	!-- created
	647	CASE ( 89 )
	648
	649	IF ( myid_char == '' ) THEN
	650	OPEN ( 89, FILE='SVFOUT'//TRIM( coupling_char )//myid_char, &
	651	FORM='UNFORMATTED', STATUS='NEW' )
	652	ELSE
	653	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	654	CALL local_system( 'mkdir SVFOUT' // TRIM( coupling_char ) )
	655	ENDIF
	656	#if defined( __parallel )
	657	!
	658	!-- Set a barrier in order to allow that all other processors in the
	659	!-- directory created by PE0 can open their file
	660	CALL MPI_BARRIER( comm2d, ierr )
	661	#endif
	662	ioerr = 1
	663	DO WHILE ( ioerr /= 0 )
	664	OPEN ( 89, FILE='SVFOUT'//TRIM(coupling_char)//'/'//myid_char, &
	665	FORM='UNFORMATTED', STATUS='NEW', IOSTAT=ioerr )
	666	IF ( ioerr /= 0 ) THEN
[2957]	667	WRITE( 9, * ) '*** could not open "SVFOUT'// &
	668	TRIM(coupling_char)//'/'//myid_char// &
[2906]	669	'"! Trying again in 1 sec.'
	670	CALL fortran_sleep( 1 )
	671	ENDIF
	672	ENDDO
	673
	674	ENDIF
	675
	676	!
[2063]	677	!-- Progress file that is used by the PALM watchdog
	678	CASE ( 117 )
	679
	680	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	681	STATUS='REPLACE', FORM='FORMATTED' )
	682
[1]	683	#if defined( __netcdf )
	684	CASE ( 101, 111 )
	685	!
	686	!-- Set filename depending on unit number
	687	IF ( file_id == 101 ) THEN
[1779]	688	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	689	av = 0
	690	ELSE
[1779]	691	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	692	av = 1
	693	ENDIF
	694	!
[1031]	695	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	696	!-- be opened for extension, if its dimensions and variables match the
	697	!-- actual run.
	698	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	699	IF ( netcdf_extend ) THEN
	700	!
[1031]	701	!-- Open an existing netCDF file for output
[1783]	702	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	703	!
	704	!-- Read header information and set all ids. If there is a mismatch
	705	!-- between the previuos and the actual run, netcdf_extend is returned
	706	!-- as .FALSE.
[1783]	707	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	708
	709	!
	710	!-- Remove the local file, if it can not be extended
	711	IF ( .NOT. netcdf_extend ) THEN
	712	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	713	CALL netcdf_handle_error( 'check_open', 21 )
[493]	714	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	715	#if defined( __parallel )
[1745]	716	!
	717	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	718	!-- before any other processor tries to open a new file.
	719	!-- Barrier is only needed in case of parallel I/O
	720	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	721	#endif
[1]	722	ENDIF
	723
[1745]	724	ENDIF
[1]	725
	726	IF ( .NOT. netcdf_extend ) THEN
	727	!
[1031]	728	!-- Create a new netCDF output file with requested netCDF format
[1783]	729	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	730
	731	!
[1]	732	!-- Define the header
[1783]	733	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	734
[493]	735	!
[1031]	736	!-- In case of parallel netCDF output, create flag file which tells
[493]	737	!-- combine_plot_fields that nothing is to do.
[1031]	738	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	739	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	740	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	741	CLOSE( 99 )
	742	ENDIF
	743
[1]	744	ENDIF
	745
	746	CASE ( 102, 112 )
	747	!
	748	!-- Set filename depending on unit number
	749	IF ( file_id == 102 ) THEN
[1779]	750	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	751	av = 0
	752	ELSE
[1779]	753	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	754	av = 1
	755	ENDIF
	756	!
[1031]	757	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	758	!-- be opened for extension, if its dimensions and variables match the
	759	!-- actual run.
	760	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	761
	762	IF ( netcdf_extend ) THEN
	763	!
[1031]	764	!-- Open an existing netCDF file for output
[1783]	765	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	766	!
	767	!-- Read header information and set all ids. If there is a mismatch
	768	!-- between the previuos and the actual run, netcdf_extend is returned
	769	!-- as .FALSE.
[1783]	770	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	771
	772	!
	773	!-- Remove the local file, if it can not be extended
	774	IF ( .NOT. netcdf_extend ) THEN
	775	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	776	CALL netcdf_handle_error( 'check_open', 24 )
[493]	777	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	778	#if defined( __parallel )
[1745]	779	!
	780	!-- Set a barrier in order to assure that PE0 deleted the old file
	781	!-- before any other processor tries to open a new file
[1974]	782	!-- Barrier is only needed in case of parallel I/O
	783	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	784	#endif
[1]	785	ENDIF
	786
[1745]	787	ENDIF
[1]	788
	789	IF ( .NOT. netcdf_extend ) THEN
	790	!
[1031]	791	!-- Create a new netCDF output file with requested netCDF format
[1783]	792	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	793
	794	!
[1]	795	!-- Define the header
[1783]	796	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	797
[493]	798	!
[1031]	799	!-- In case of parallel netCDF output, create flag file which tells
[493]	800	!-- combine_plot_fields that nothing is to do.
[1031]	801	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	802	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	803	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	804	CLOSE( 99 )
	805	ENDIF
	806
[1]	807	ENDIF
	808
	809	CASE ( 103, 113 )
	810	!
	811	!-- Set filename depending on unit number
	812	IF ( file_id == 103 ) THEN
[1779]	813	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	814	av = 0
	815	ELSE
[1779]	816	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	817	av = 1
	818	ENDIF
	819	!
[1031]	820	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	821	!-- be opened for extension, if its dimensions and variables match the
	822	!-- actual run.
	823	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	824
	825	IF ( netcdf_extend ) THEN
	826	!
[1031]	827	!-- Open an existing netCDF file for output
[1783]	828	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	829	!
	830	!-- Read header information and set all ids. If there is a mismatch
	831	!-- between the previuos and the actual run, netcdf_extend is returned
	832	!-- as .FALSE.
[1783]	833	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	834
	835	!
	836	!-- Remove the local file, if it can not be extended
	837	IF ( .NOT. netcdf_extend ) THEN
	838	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	839	CALL netcdf_handle_error( 'check_open', 27 )
[493]	840	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	841	#if defined( __parallel )
[1745]	842	!
	843	!-- Set a barrier in order to assure that PE0 deleted the old file
	844	!-- before any other processor tries to open a new file
[1974]	845	!-- Barrier is only needed in case of parallel I/O
	846	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	847	#endif
[1]	848	ENDIF
	849
[1745]	850	ENDIF
[1]	851
	852	IF ( .NOT. netcdf_extend ) THEN
	853	!
[1031]	854	!-- Create a new netCDF output file with requested netCDF format
[1783]	855	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	856
	857	!
[1]	858	!-- Define the header
[1783]	859	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	860
[493]	861	!
[1031]	862	!-- In case of parallel netCDF output, create flag file which tells
[493]	863	!-- combine_plot_fields that nothing is to do.
[1031]	864	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	865	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	866	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	867	CLOSE( 99 )
	868	ENDIF
	869
[1]	870	ENDIF
	871
	872	CASE ( 104 )
	873	!
[102]	874	!-- Set filename
[1779]	875	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	876
	877	!
[1031]	878	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	879	!-- be opened for extension, if its variables match the actual run.
[102]	880	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	881
	882	IF ( netcdf_extend ) THEN
	883	!
[1031]	884	!-- Open an existing netCDF file for output
[1783]	885	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	886	!
	887	!-- Read header information and set all ids. If there is a mismatch
	888	!-- between the previuos and the actual run, netcdf_extend is returned
	889	!-- as .FALSE.
[1783]	890	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	891
	892	!
	893	!-- Remove the local file, if it can not be extended
	894	IF ( .NOT. netcdf_extend ) THEN
	895	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	896	CALL netcdf_handle_error( 'check_open', 30 )
[102]	897	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	898	ENDIF
	899
	900	ENDIF
	901
	902	IF ( .NOT. netcdf_extend ) THEN
	903	!
[1031]	904	!-- Create a new netCDF output file with requested netCDF format
[1783]	905	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	906	!
	907	!-- Define the header
[1783]	908	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	909
	910	ENDIF
	911
	912	CASE ( 105 )
	913	!
[102]	914	!-- Set filename
[1779]	915	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	916
	917	!
[1031]	918	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	919	!-- be opened for extension, if its variables match the actual run.
[102]	920	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	921
	922	IF ( netcdf_extend ) THEN
	923	!
[1031]	924	!-- Open an existing netCDF file for output
[1783]	925	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	926	!
	927	!-- Read header information and set all ids. If there is a mismatch
	928	!-- between the previuos and the actual run, netcdf_extend is returned
	929	!-- as .FALSE.
[1783]	930	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	931
	932	!
	933	!-- Remove the local file, if it can not be extended
	934	IF ( .NOT. netcdf_extend ) THEN
	935	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	936	CALL netcdf_handle_error( 'check_open', 33 )
[102]	937	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	938	ENDIF
	939
	940	ENDIF
	941
	942	IF ( .NOT. netcdf_extend ) THEN
	943	!
[1031]	944	!-- Create a new netCDF output file with requested netCDF format
[1783]	945	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	946	!
	947	!-- Define the header
[1783]	948	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	949
	950	ENDIF
	951
	952
	953	CASE ( 106, 116 )
	954	!
	955	!-- Set filename depending on unit number
	956	IF ( file_id == 106 ) THEN
[1779]	957	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	958	av = 0
	959	ELSE
[1779]	960	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	961	av = 1
	962	ENDIF
	963	!
[1031]	964	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	965	!-- be opened for extension, if its dimensions and variables match the
	966	!-- actual run.
	967	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	968	IF ( netcdf_extend ) THEN
	969	!
[1031]	970	!-- Open an existing netCDF file for output
[1783]	971	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	972	!
	973	!-- Read header information and set all ids. If there is a mismatch
	974	!-- between the previuos and the actual run, netcdf_extend is returned
	975	!-- as .FALSE.
[1783]	976	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	977
	978	!
	979	!-- Remove the local file, if it can not be extended
	980	IF ( .NOT. netcdf_extend ) THEN
	981	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	982	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	983	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	984	#if defined( __parallel )
[1745]	985	!
	986	!-- Set a barrier in order to assure that PE0 deleted the old file
	987	!-- before any other processor tries to open a new file
[1974]	988	!-- Barrier is only needed in case of parallel I/O
	989	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	990	#endif
[1]	991	ENDIF
	992
[1745]	993	ENDIF
[1]	994
	995	IF ( .NOT. netcdf_extend ) THEN
	996	!
[1031]	997	!-- Create a new netCDF output file with requested netCDF format
[1783]	998	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	999
	1000	!
[1]	1001	!-- Define the header
[1783]	1002	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	1003
[493]	1004	!
[1031]	1005	!-- In case of parallel netCDF output, create flag file which tells
[493]	1006	!-- combine_plot_fields that nothing is to do.
[1031]	1007	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	1008	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1009	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1010	CLOSE( 99 )
	1011	ENDIF
	1012
[1]	1013	ENDIF
	1014
	1015
	1016	CASE ( 107 )
	1017	!
[102]	1018	!-- Set filename
[1779]	1019	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	1020
	1021	!
[1031]	1022	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1023	!-- be opened for extension, if its variables match the actual run.
[102]	1024	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1025
	1026	IF ( netcdf_extend ) THEN
	1027	!
[1031]	1028	!-- Open an existing netCDF file for output
[1783]	1029	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	1030
[1]	1031	!
	1032	!-- Read header information and set all ids. If there is a mismatch
	1033	!-- between the previuos and the actual run, netcdf_extend is returned
	1034	!-- as .FALSE.
[1783]	1035	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1036
	1037	!
	1038	!-- Remove the local file, if it can not be extended
	1039	IF ( .NOT. netcdf_extend ) THEN
	1040	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	1041	CALL netcdf_handle_error( 'check_open', 39 )
[102]	1042	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1043	ENDIF
	1044
	1045	ENDIF
	1046
	1047	IF ( .NOT. netcdf_extend ) THEN
	1048	!
[1031]	1049	!-- Create a new netCDF output file with requested netCDF format
[1783]	1050	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	1051	!
	1052	!-- Define the header
[1783]	1053	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1054
	1055	ENDIF
	1056
[3045]	1057	!
	1058	!-- Currently disabled
	1059	! CASE ( 108 )
[1]	1060
[3045]	1061	! IF ( myid_char == '' ) THEN
	1062	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
	1063	! ELSE
	1064	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1065	! myid_char
	1066	! ENDIF
[1]	1067	!
[1031]	1068	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1069	!-- be opened for extension, if its variables match the actual run.
[3045]	1070	! INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1071
[3045]	1072	! IF ( netcdf_extend ) THEN
[1]	1073	!
[1031]	1074	!-- Open an existing netCDF file for output
[3045]	1075	! CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	1076	!
	1077	!-- Read header information and set all ids. If there is a mismatch
	1078	!-- between the previuos and the actual run, netcdf_extend is returned
	1079	!-- as .FALSE.
[3045]	1080	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1081
	1082	!
	1083	!-- Remove the local file, if it can not be extended
[3045]	1084	! IF ( .NOT. netcdf_extend ) THEN
	1085	! nc_stat = NF90_CLOSE( id_set_prt )
	1086	! CALL netcdf_handle_error( 'check_open', 42 )
	1087	! CALL local_system( 'rm ' // TRIM( filename ) )
	1088	! ENDIF
[1]	1089
[3045]	1090	! ENDIF
[1]	1091
[3045]	1092	! IF ( .NOT. netcdf_extend ) THEN
[1]	1093
	1094	!
	1095	!-- For runs on multiple processors create the subdirectory
[3045]	1096	! IF ( myid_char /= '' ) THEN
	1097	! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1098	! THEN ! needs modification in case of non-extendable sets
	1099	! CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
	1100	! TRIM( coupling_char ) // '/' )
	1101	! ENDIF
[1804]	1102	#if defined( __parallel )
[807]	1103	!
[1]	1104	!-- Set a barrier in order to allow that all other processors in the
	1105	!-- directory created by PE0 can open their file
[3045]	1106	! CALL MPI_BARRIER( comm2d, ierr )
[1]	1107	#endif
[3045]	1108	! ENDIF
[1]	1109
	1110	!
[1031]	1111	!-- Create a new netCDF output file with requested netCDF format
[3045]	1112	! CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1113
	1114	!
[1]	1115	!-- Define the header
[3045]	1116	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1117
[3045]	1118	! ENDIF
[1]	1119
	1120	CASE ( 109 )
	1121	!
[102]	1122	!-- Set filename
[1779]	1123	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1124
	1125	!
[1031]	1126	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1127	!-- be opened for extension, if its variables match the actual run.
[102]	1128	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1129
	1130	IF ( netcdf_extend ) THEN
	1131	!
[1031]	1132	!-- Open an existing netCDF file for output
[1783]	1133	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1134	!
	1135	!-- Read header information and set all ids. If there is a mismatch
	1136	!-- between the previuos and the actual run, netcdf_extend is returned
	1137	!-- as .FALSE.
[1783]	1138	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1139
	1140	!
	1141	!-- Remove the local file, if it can not be extended
	1142	IF ( .NOT. netcdf_extend ) THEN
	1143	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1144	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1145	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1146	ENDIF
	1147
	1148	ENDIF
	1149
	1150	IF ( .NOT. netcdf_extend ) THEN
	1151	!
[1031]	1152	!-- Create a new netCDF output file with requested netCDF format
[1783]	1153	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1154	!
	1155	!-- Define the header
[1783]	1156	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1157
	1158	ENDIF
[410]	1159
[3159]	1160	CASE ( 118 )
	1161
	1162	IF ( myid == 0 ) THEN
	1163	filename = 'DATA_AGT_NETCDF'
[1468]	1164	!
[3159]	1165	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1166	!-- be opened for extension, if its variables match the actual run.
	1167	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1168
	1169	!
	1170	!-- Create a new netCDF output file with requested netCDF format
	1171	CALL netcdf_create_file( filename, id_set_agt, .FALSE., 43 )
	1172
	1173	!
	1174	!-- Define the header
	1175	CALL netcdf_define_header( 'ag', netcdf_extend, 0 )
	1176	ENDIF
	1177
	1178	! IF ( netcdf_extend ) THEN
	1179	! !
	1180	! !-- Open an existing netCDF file for output
	1181	! CALL netcdf_open_write_file( filename, id_set_agt, .FALSE., 41 )
	1182	! !
	1183	! !-- Read header information and set all ids. If there is a mismatch
	1184	! !-- between the previuos and the actual run, netcdf_extend is returned
	1185	! !-- as .FALSE.
	1186	! CALL netcdf_define_header( 'ag', netcdf_extend, 0 )
	1187	!
	1188	! !
	1189	! !-- Remove the local file, if it can not be extended
	1190	! IF ( .NOT. netcdf_extend ) THEN
	1191	! nc_stat = NF90_CLOSE( id_set_agt )
	1192	! CALL netcdf_handle_error( 'check_open', 42 )
	1193	! CALL local_system( 'rm ' // TRIM( filename ) )
	1194	! ENDIF
	1195	!
	1196	! ENDIF
	1197
	1198	IF ( .NOT. netcdf_extend ) THEN
	1199
	1200	!
	1201	! !-- For runs on multiple processors create the subdirectory
	1202	! IF ( myid_char /= '' ) THEN
	1203	! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1204	! THEN ! needs modification in case of non-extendable sets
	1205	! CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
	1206	! TRIM( coupling_char ) // '/' )
	1207	! ENDIF
	1208	! #if defined( __parallel )
	1209	! !
	1210	! !-- Set a barrier in order to allow that all other processors in the
	1211	! !-- directory created by PE0 can open their file
	1212	! CALL MPI_BARRIER( comm2d, ierr )
	1213	! #endif
	1214	! ENDIF
	1215
	1216	ENDIF
	1217
[3421]	1218
[3159]	1219	!
[1957]	1220	!-- nc-file for virtual flight measurements
	1221	CASE ( 199 )
	1222	!
	1223	!-- Set filename
	1224	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1225
[1957]	1226	!
	1227	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1228	!-- be opened for extension, if its variables match the actual run.
	1229	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1230
[1957]	1231	IF ( netcdf_extend ) THEN
	1232	!
	1233	!-- Open an existing netCDF file for output
	1234	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1235	!
	1236	!-- Read header information and set all ids. If there is a mismatch
	1237	!-- between the previuos and the actual run, netcdf_extend is returned
	1238	!-- as .FALSE.
	1239	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1240
	1241	!
	1242	!-- Remove the local file, if it can not be extended
	1243	IF ( .NOT. netcdf_extend ) THEN
	1244	nc_stat = NF90_CLOSE( id_set_fl )
	1245	CALL netcdf_handle_error( 'check_open', 533 )
	1246	CALL local_system( 'rm ' // TRIM( filename ) )
	1247	ENDIF
	1248
	1249	ENDIF
	1250
	1251	IF ( .NOT. netcdf_extend ) THEN
	1252	!
	1253	!-- Create a new netCDF output file with requested netCDF format
	1254	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1255	!
	1256	!-- Define the header
	1257	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1258
	1259	ENDIF
	1260
	1261
[564]	1262	CASE ( 201:200+2*max_masks )
[410]	1263	!
	1264	!-- Set filename depending on unit number
[564]	1265	IF ( file_id <= 200+max_masks ) THEN
	1266	mid = file_id - 200
[2669]	1267	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1268	filename = 'DATA_MASK_NETCDF' // TRIM( coupling_char ) // &
	1269	mask_char
[410]	1270	av = 0
	1271	ELSE
[564]	1272	mid = file_id - (200+max_masks)
[2669]	1273	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1274	filename = 'DATA_MASK_AV_NETCDF' // TRIM( coupling_char ) // &
	1275	mask_char
[410]	1276	av = 1
	1277	ENDIF
	1278	!
[1031]	1279	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1280	!-- be opened for extension, if its dimensions and variables match the
	1281	!-- actual run.
	1282	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1283
	1284	IF ( netcdf_extend ) THEN
	1285	!
[1031]	1286	!-- Open an existing netCDF file for output
[1783]	1287	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1288	.TRUE., 456 )
[410]	1289	!
	1290	!-- Read header information and set all ids. If there is a mismatch
	1291	!-- between the previuos and the actual run, netcdf_extend is returned
	1292	!-- as .FALSE.
[1783]	1293	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1294
[410]	1295	!
	1296	!-- Remove the local file, if it can not be extended
	1297	IF ( .NOT. netcdf_extend ) THEN
	1298	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1299	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1300	CALL local_system('rm ' // TRIM( filename ) )
	1301	ENDIF
[1]	1302
[410]	1303	ENDIF
	1304
	1305	IF ( .NOT. netcdf_extend ) THEN
[1]	1306	!
[1031]	1307	!-- Create a new netCDF output file with requested netCDF format
[1783]	1308	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1309	!
[410]	1310	!-- Define the header
[1783]	1311	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1312
	1313	ENDIF
	1314
	1315
	1316	#else
	1317
[564]	1318	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1319
	1320	!
[1]	1321	!-- Nothing is done in case of missing netcdf support
	1322	RETURN
	1323
	1324	#endif
	1325
	1326	CASE DEFAULT
	1327
[247]	1328	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1329	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1330
	1331	END SELECT
	1332
	1333	!
	1334	!-- Set open flag
	1335	openfile(file_id)%opened = .TRUE.
	1336
	1337	!
	1338	!-- Formats
[1320]	1339	8000 FORMAT (A/ &
[1359]	1340	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1341	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1342	109('-'))
[1]	1343
	1344	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |