Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 3117

Last change on this file since 3117 was 3045, checked in by Giersch, 6 years ago
Code adjusted according to coding standards, renamed namelists, error messages revised until PA0347, output CASE 108 disabled
Property svn:keywords set to `Id`
File size: 43.1 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[2696]	14	! You should have received a copy of the GNU General Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2718]	17	! Copyright 1997-2018 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[2516]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 3045 2018-05-28 07:55:41Z maronga $
[3045]	27	! Output case 108 disabled
	28	!
	29	! 2964 2018-04-12 16:04:03Z Giersch
[2964]	30	! Error message moved to radiation_model_mod
	31	!
	32	! 2957 2018-04-11 08:48:06Z Giersch
[2957]	33	! Error message has been corrected in case of writing sky view factors
	34	!
	35	! 2906 2018-03-19 08:56:40Z Giersch
[2906]	36	! CASE 88 and 89 has been added for the input/output of sky view factors
	37	!
	38	! 2718 2018-01-02 08:49:38Z maronga
[2716]	39	! Corrected "Former revisions" section
	40	!
	41	! 2696 2017-12-14 17:12:51Z kanani
	42	! Change in file header (GPL part)
	43	!
	44	! 2669 2017-12-06 16:03:27Z raasch
[2669]	45	! file name extension for masked data files is changed to "_M##" and is now
	46	! appended at the end of the filename,
	47	! file ids not used any more have been removed
	48	!
	49	! 2516 2017-10-04 11:03:04Z suehring
[2516]	50	! Remove tabs
	51	!
	52	! 2514 2017-10-04 09:52:37Z suehring
[2512]	53	! upper bounds of cross section and 3d output changed from nx+1,ny+1 to nx,ny
	54	! no output of ghost layer data
	55	! iso2d-related parts removed
	56	!
	57	! 2300 2017-06-29 13:31:14Z raasch
[2300]	58	! -host
	59	!
	60	! 2298 2017-06-29 09:28:18Z raasch
[2298]	61	! -return_addres, return_username, avs_coor_file_..., avs_data_file_...,
	62	! cross_ts_numbers, cross_ts_number_count
[1321]	63	!
[2298]	64	! 2101 2017-01-05 16:42:31Z suehring
	65	!
[2064]	66	! 2063 2016-11-10 17:14:35Z raasch
	67	! bugfix: opening of PROGRESS file moved out of the NetCDF block
	68	!
[2041]	69	! 2040 2016-10-26 16:58:09Z gronemeier
[2040]	70	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
	71	!
[2001]	72	! 2000 2016-08-20 18:09:15Z knoop
	73	! Forced header and separation lines into 80 columns
	74	!
[1989]	75	! 1988 2016-08-10 14:49:06Z gronemeier
	76	! informative message added if files cannot be opened in newly created directory
	77	!
[1987]	78	! 1986 2016-08-10 14:07:17Z gronemeier
	79	! Bugfix: check if output can be opened in newly created directory. If not
	80	! wait one second and try again.
	81	!
[1975]	82	! 1974 2016-07-26 08:43:25Z gronemeier
	83	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	84	! in case of parallel I/O
	85	!
[1958]	86	! 1957 2016-07-07 10:43:48Z suehring
	87	! flight module added
	88	!
[1805]	89	! 1804 2016-04-05 16:30:18Z maronga
	90	! Removed code for parameter file check (__check)
	91	!
[1784]	92	! 1783 2016-03-06 18:36:17Z raasch
	93	! name change of netcdf routines and module + related changes
	94	!
[1780]	95	! 1779 2016-03-03 08:01:28Z raasch
	96	! coupling_char is trimmed at every place it occurs, because it can have
	97	! different length now
	98	!
[1746]	99	! 1745 2016-02-05 13:06:51Z gronemeier
	100	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	101	!
[1683]	102	! 1682 2015-10-07 23:56:08Z knoop
	103	! Code annotations made doxygen readable
	104	!
[1552]	105	! 1551 2015-03-03 14:18:16Z maronga
	106	! Removed redundant output for combine_plot_fields
	107	!
[1469]	108	! 1468 2014-09-24 14:06:57Z maronga
	109	! Adapted for use on up to 6-digit processor cores
	110	! Added file unit 117 (PROGRESS)
	111	!
[1360]	112	! 1359 2014-04-11 17:15:14Z hoffmann
	113	! Format of particle exchange statistics extended to reasonable numbers of
	114	! particles.
	115	!
[1354]	116	! 1353 2014-04-08 15:21:23Z heinze
	117	! REAL constants provided with KIND-attribute,
	118	! declaration for unused variables xkoor, ykoor, zkoor removed
	119	!
[1329]	120	! 1327 2014-03-21 11:00:16Z raasch
	121	! parts concerning iso2d and avs output removed
	122	!
[1321]	123	! 1320 2014-03-20 08:40:49Z raasch
[1320]	124	! ONLY-attribute added to USE-statements,
	125	! kind-parameters added to all INTEGER and REAL declaration statements,
	126	! kinds are defined in new module kinds,
	127	! old module precision_kind is removed,
	128	! revision history before 2012 removed,
	129	! comment fields (!:) to be used for variable explanations added to
	130	! all variable declaration statements
[1]	131	!
[1107]	132	! 1106 2013-03-04 05:31:38Z raasch
	133	! array_kind renamed precision_kind
	134	!
[1093]	135	! 1092 2013-02-02 11:24:22Z raasch
	136	! unused variables removed
	137	!
[1037]	138	! 1036 2012-10-22 13:43:42Z raasch
	139	! code put under GPL (PALM 3.9)
	140	!
[1035]	141	! 1031 2012-10-19 14:35:30Z raasch
	142	! netCDF4 without parallel file support implemented,
	143	! opening of netCDF files are done by new routines create_netcdf_file and
	144	! open_write_netcdf_file
	145	!
[965]	146	! 964 2012-07-26 09:14:24Z raasch
	147	! old profil-units (40:49) removed,
	148	! append feature removed from unit 14
	149	!
[850]	150	! 849 2012-03-15 10:35:09Z raasch
	151	! comment changed
	152	!
[810]	153	! 809 2012-01-30 13:32:58Z maronga
	154	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	155	!
[808]	156	! 807 2012-01-25 11:53:51Z maronga
	157	! New cpp directive "__check" implemented which is used by check_namelist_files
	158	!
[1]	159	! Revision 1.1 1997/08/11 06:10:55 raasch
	160	! Initial revision
	161	!
	162	!
	163	! Description:
	164	! ------------
[1682]	165	!> Check if file unit is open. If not, open file and, if necessary, write a
	166	!> header or start other initializing actions, respectively.
[1]	167	!------------------------------------------------------------------------------!
[1682]	168	SUBROUTINE check_open( file_id )
	169
[1]	170
[1320]	171	USE arrays_3d, &
	172	ONLY: zu
	173
	174	USE control_parameters, &
[2964]	175	ONLY: coupling_char, data_output_2d_on_each_pe, &
	176	max_masks, message_string, mid, nz_do3d, openfile, &
	177	run_description_header, runnr
[1320]	178
	179	USE grid_variables, &
	180	ONLY: dx, dy
	181
	182	USE indices, &
[1551]	183	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
[1320]	184
	185	USE kinds
	186
[1783]	187	#if defined( __netcdf )
	188	USE NETCDF
	189	#endif
[1320]	190
[1783]	191	USE netcdf_interface, &
[1957]	192	ONLY: id_set_fl, id_set_mask, id_set_pr, id_set_prt, id_set_pts, &
	193	id_set_sp, id_set_ts, id_set_xy, id_set_xz, id_set_yz, &
	194	id_set_3d, nc_stat, netcdf_create_file, netcdf_data_format, &
	195	netcdf_define_header, netcdf_handle_error, netcdf_open_write_file
[1783]	196
[1320]	197	USE particle_attributes, &
	198	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	199	particle_groups
	200
[1]	201	USE pegrid
	202
[1986]	203	USE posix_calls_from_fortran, &
	204	ONLY: fortran_sleep
	205
[1320]	206
[1]	207	IMPLICIT NONE
	208
[2669]	209	CHARACTER (LEN=4) :: mask_char !<
[1682]	210	CHARACTER (LEN=2) :: suffix !<
	211	CHARACTER (LEN=30) :: filename !<
	212	CHARACTER (LEN=80) :: rtext !<
	213	CHARACTER (LEN=100) :: line !<
[1]	214
[1682]	215	INTEGER(iwp) :: av !<
	216	INTEGER(iwp) :: file_id !<
	217	INTEGER(iwp) :: i !<
[1986]	218	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[1682]	219	INTEGER(iwp) :: j !<
	220	INTEGER(iwp) :: k !<
[1320]	221
[2512]	222	LOGICAL :: netcdf_extend !<
[1]	223
	224	!
	225	!-- Immediate return if file already open
	226	IF ( openfile(file_id)%opened ) RETURN
	227
	228	!
	229	!-- Only certain files are allowed to be re-opened
	230	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	231	!-- has not been checked so far, if it works!
	232	IF ( openfile(file_id)%opened_before ) THEN
	233	SELECT CASE ( file_id )
[2669]	234	CASE ( 13, 14, 21, 22, 23, 80, 85, 117 )
[1]	235	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	236	message_string = 're-open of unit ' // &
[274]	237	'14 is not verified. Please check results!'
[247]	238	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	239	ENDIF
[143]	240
[1]	241	CASE DEFAULT
[1320]	242	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	243	' is not allowed'
[247]	244	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	245
[1]	246	RETURN
[143]	247
[1]	248	END SELECT
	249	ENDIF
	250
	251	!
	252	!-- Check if file may be opened on the relevant PE
	253	SELECT CASE ( file_id )
	254
[2669]	255	CASE ( 15, 16, 17, 18, 19, 50:59, 104:105, 107, 109, 117 )
[2514]	256
[493]	257	IF ( myid /= 0 ) THEN
[1320]	258	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	259	' not allowed for PE ',myid
	260	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	261	ENDIF
	262
[564]	263	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	264
[1031]	265	IF ( netcdf_data_format < 5 ) THEN
[247]	266
[410]	267	IF ( myid /= 0 ) THEN
[1320]	268	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	269	' not allowed for PE ',myid
	270	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	271	ENDIF
[2514]	272
[493]	273	ENDIF
[1]	274
	275	CASE ( 21, 22, 23 )
	276
	277	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	278	IF ( myid /= 0 ) THEN
[1320]	279	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	280	' not allowed for PE ',myid
[277]	281	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	282	END IF
[1]	283	ENDIF
	284
[2669]	285	CASE ( 90:99 )
[1]	286
	287	!
	288	!-- File-ids that are used temporarily in other routines
[1320]	289	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	290	' is not allowed since it is used otherwise'
[247]	291	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	292
[1]	293	END SELECT
	294
	295	!
	296	!-- Open relevant files
	297	SELECT CASE ( file_id )
	298
	299	CASE ( 11 )
	300
[1779]	301	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
[102]	302	STATUS='OLD' )
[1]	303
	304	CASE ( 13 )
	305
	306	IF ( myid_char == '' ) THEN
[1779]	307	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	308	FORM='UNFORMATTED', STATUS='OLD' )
[1]	309	ELSE
[143]	310	!
[1468]	311	!-- First opening of unit 13 openes file _000000 on all PEs because
	312	!-- only this file contains the global variables
[143]	313	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	314	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	315	FORM='UNFORMATTED', STATUS='OLD' )
	316	ELSE
[1779]	317	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	318	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	319	ENDIF
[1]	320	ENDIF
	321
	322	CASE ( 14 )
	323
	324	IF ( myid_char == '' ) THEN
[1779]	325	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	326	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	327	ELSE
	328	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	329	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	330	ENDIF
[1804]	331	#if defined( __parallel )
[1]	332	!
	333	!-- Set a barrier in order to allow that all other processors in the
	334	!-- directory created by PE0 can open their file
	335	CALL MPI_BARRIER( comm2d, ierr )
	336	#endif
[1986]	337	ioerr = 1
	338	DO WHILE ( ioerr /= 0 )
	339	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	340	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	341	IF ( ioerr /= 0 ) THEN
	342	WRITE( 9, * ) '*** could not open "BINOUT'// &
	343	TRIM(coupling_char)//'/'//myid_char// &
	344	'"! Trying again in 1 sec.'
	345	CALL fortran_sleep( 1 )
	346	ENDIF
[1986]	347	ENDDO
	348
[1]	349	ENDIF
	350
	351	CASE ( 15 )
	352
[1779]	353	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	354	FORM='FORMATTED' )
[1]	355
	356	CASE ( 16 )
	357
[1779]	358	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	359	FORM='FORMATTED' )
[1]	360
	361	CASE ( 17 )
	362
[1779]	363	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	364	FORM='FORMATTED' )
[1]	365
	366	CASE ( 18 )
	367
[1779]	368	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	369	FORM='FORMATTED' )
[1]	370
	371	CASE ( 19 )
	372
[1779]	373	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	374
	375	CASE ( 20 )
	376
	377	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	378	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	379	ENDIF
	380	IF ( myid_char == '' ) THEN
[1779]	381	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	382	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	383	ELSE
[1804]	384	#if defined( __parallel )
[1]	385	!
	386	!-- Set a barrier in order to allow that all other processors in the
	387	!-- directory created by PE0 can open their file
	388	CALL MPI_BARRIER( comm2d, ierr )
	389	#endif
[1986]	390	ioerr = 1
	391	DO WHILE ( ioerr /= 0 )
	392	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	393	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	394	IOSTAT=ioerr )
[1988]	395	IF ( ioerr /= 0 ) THEN
	396	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	397	TRIM( coupling_char )//'/'//myid_char// &
	398	'"! Trying again in 1 sec.'
	399	CALL fortran_sleep( 1 )
	400	ENDIF
[1986]	401	ENDDO
	402
[1]	403	ENDIF
	404
	405	CASE ( 21 )
	406
	407	IF ( data_output_2d_on_each_pe ) THEN
[1320]	408	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	409	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	410	ELSE
[1779]	411	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	412	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	413	ENDIF
	414
	415	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	416	!
[2512]	417	!-- Write index bounds of total domain for combine_plot_fields
[1]	418	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	419	WRITE (21) 0, nx, 0, ny
[1]	420	ENDIF
	421
	422	ENDIF
	423
	424	CASE ( 22 )
	425
	426	IF ( data_output_2d_on_each_pe ) THEN
[1320]	427	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	428	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	429	ELSE
[1779]	430	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	431	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	432	ENDIF
	433
	434	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	435	!
[2512]	436	!-- Write index bounds of total domain for combine_plot_fields
[1]	437	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	438	WRITE (22) 0, nx, 0, nz+1 ! output part
[1]	439	ENDIF
	440
	441	ENDIF
	442
	443	CASE ( 23 )
	444
	445	IF ( data_output_2d_on_each_pe ) THEN
[1320]	446	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	447	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	448	ELSE
[1779]	449	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	450	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	451	ENDIF
	452
	453	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	454	!
[2512]	455	!-- Write index bounds of total domain for combine_plot_fields
[1]	456	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	457	WRITE (23) 0, ny, 0, nz+1 ! output part
[1]	458	ENDIF
	459
	460	ENDIF
	461
	462	CASE ( 30 )
	463
[1320]	464	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	465	FORM='UNFORMATTED' )
[1]	466	!
[2512]	467	!-- Specifications for combine_plot_fields
[1]	468	IF ( myid == 0 ) THEN
	469	#if defined( __parallel )
[2512]	470	WRITE ( 30 ) 0, nx, 0, ny, 0, nz_do3d
[1]	471	#endif
	472	ENDIF
	473
	474	CASE ( 80 )
	475
	476	IF ( myid_char == '' ) THEN
[105]	477	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	478	FORM='FORMATTED', POSITION='APPEND' )
[1]	479	ELSE
	480	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	481	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	482	TRIM( coupling_char ) )
[1]	483	ENDIF
[1804]	484	#if defined( __parallel )
[1]	485	!
	486	!-- Set a barrier in order to allow that thereafter all other
	487	!-- processors in the directory created by PE0 can open their file.
	488	!-- WARNING: The following barrier will lead to hanging jobs, if
	489	!-- check_open is first called from routine
	490	!-- allocate_prt_memory!
	491	IF ( .NOT. openfile(80)%opened_before ) THEN
	492	CALL MPI_BARRIER( comm2d, ierr )
	493	ENDIF
	494	#endif
[1320]	495	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	496	myid_char, &
[102]	497	FORM='FORMATTED', POSITION='APPEND' )
[1]	498	ENDIF
	499
	500	IF ( .NOT. openfile(80)%opened_before ) THEN
	501	WRITE ( 80, 8000 ) TRIM( run_description_header )
	502	ENDIF
	503
	504	CASE ( 85 )
	505
	506	IF ( myid_char == '' ) THEN
[1320]	507	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	508	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	509	ELSE
	510	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	511	CALL local_system( 'mkdir PARTICLE_DATA' // &
	512	TRIM( coupling_char ) )
[1]	513	ENDIF
[1804]	514	#if defined( __parallel )
[1]	515	!
	516	!-- Set a barrier in order to allow that thereafter all other
	517	!-- processors in the directory created by PE0 can open their file
	518	CALL MPI_BARRIER( comm2d, ierr )
	519	#endif
[1986]	520	ioerr = 1
	521	DO WHILE ( ioerr /= 0 )
	522	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	523	myid_char, &
	524	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	525	IF ( ioerr /= 0 ) THEN
[2906]	526	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	527	TRIM( coupling_char )//'/'//myid_char// &
[1988]	528	'"! Trying again in 1 sec.'
	529	CALL fortran_sleep( 1 )
	530	ENDIF
[1986]	531	ENDDO
	532
[1]	533	ENDIF
	534
	535	IF ( .NOT. openfile(85)%opened_before ) THEN
	536	WRITE ( 85 ) run_description_header
	537	!
	538	!-- Attention: change version number whenever the output format on
[849]	539	!-- unit 85 is changed (see also in routine
	540	!-- lpm_data_output_particles)
[1359]	541	rtext = 'data format version 3.1'
[1]	542	WRITE ( 85 ) rtext
[1320]	543	WRITE ( 85 ) number_of_particle_groups, &
[1]	544	max_number_of_particle_groups
	545	WRITE ( 85 ) particle_groups
[1359]	546	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	547	ENDIF
	548
[2063]	549	!
[2906]	550	!-- File where sky-view factors and further required data is stored will be
	551	!-- read
	552	CASE ( 88 )
	553
	554	IF ( myid_char == '' ) THEN
	555	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//myid_char, &
	556	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	557	ELSE
	558
	559	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//'/'//myid_char, &
	560	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	561	ENDIF
	562
	563	!
	564	!-- File where sky-view factors and further required data is stored will be
	565	!-- created
	566	CASE ( 89 )
	567
	568	IF ( myid_char == '' ) THEN
	569	OPEN ( 89, FILE='SVFOUT'//TRIM( coupling_char )//myid_char, &
	570	FORM='UNFORMATTED', STATUS='NEW' )
	571	ELSE
	572	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	573	CALL local_system( 'mkdir SVFOUT' // TRIM( coupling_char ) )
	574	ENDIF
	575	#if defined( __parallel )
	576	!
	577	!-- Set a barrier in order to allow that all other processors in the
	578	!-- directory created by PE0 can open their file
	579	CALL MPI_BARRIER( comm2d, ierr )
	580	#endif
	581	ioerr = 1
	582	DO WHILE ( ioerr /= 0 )
	583	OPEN ( 89, FILE='SVFOUT'//TRIM(coupling_char)//'/'//myid_char, &
	584	FORM='UNFORMATTED', STATUS='NEW', IOSTAT=ioerr )
	585	IF ( ioerr /= 0 ) THEN
[2957]	586	WRITE( 9, * ) '*** could not open "SVFOUT'// &
	587	TRIM(coupling_char)//'/'//myid_char// &
[2906]	588	'"! Trying again in 1 sec.'
	589	CALL fortran_sleep( 1 )
	590	ENDIF
	591	ENDDO
	592
	593	ENDIF
	594
	595	!
[2063]	596	!-- Progress file that is used by the PALM watchdog
	597	CASE ( 117 )
	598
	599	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	600	STATUS='REPLACE', FORM='FORMATTED' )
	601
[1]	602	#if defined( __netcdf )
	603	CASE ( 101, 111 )
	604	!
	605	!-- Set filename depending on unit number
	606	IF ( file_id == 101 ) THEN
[1779]	607	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	608	av = 0
	609	ELSE
[1779]	610	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	611	av = 1
	612	ENDIF
	613	!
[1031]	614	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	615	!-- be opened for extension, if its dimensions and variables match the
	616	!-- actual run.
	617	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	618	IF ( netcdf_extend ) THEN
	619	!
[1031]	620	!-- Open an existing netCDF file for output
[1783]	621	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	622	!
	623	!-- Read header information and set all ids. If there is a mismatch
	624	!-- between the previuos and the actual run, netcdf_extend is returned
	625	!-- as .FALSE.
[1783]	626	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	627
	628	!
	629	!-- Remove the local file, if it can not be extended
	630	IF ( .NOT. netcdf_extend ) THEN
	631	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	632	CALL netcdf_handle_error( 'check_open', 21 )
[493]	633	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	634	#if defined( __parallel )
[1745]	635	!
	636	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	637	!-- before any other processor tries to open a new file.
	638	!-- Barrier is only needed in case of parallel I/O
	639	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	640	#endif
[1]	641	ENDIF
	642
[1745]	643	ENDIF
[1]	644
	645	IF ( .NOT. netcdf_extend ) THEN
	646	!
[1031]	647	!-- Create a new netCDF output file with requested netCDF format
[1783]	648	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	649
	650	!
[1]	651	!-- Define the header
[1783]	652	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	653
[493]	654	!
[1031]	655	!-- In case of parallel netCDF output, create flag file which tells
[493]	656	!-- combine_plot_fields that nothing is to do.
[1031]	657	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	658	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	659	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	660	CLOSE( 99 )
	661	ENDIF
	662
[1]	663	ENDIF
	664
	665	CASE ( 102, 112 )
	666	!
	667	!-- Set filename depending on unit number
	668	IF ( file_id == 102 ) THEN
[1779]	669	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	670	av = 0
	671	ELSE
[1779]	672	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	673	av = 1
	674	ENDIF
	675	!
[1031]	676	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	677	!-- be opened for extension, if its dimensions and variables match the
	678	!-- actual run.
	679	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	680
	681	IF ( netcdf_extend ) THEN
	682	!
[1031]	683	!-- Open an existing netCDF file for output
[1783]	684	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	685	!
	686	!-- Read header information and set all ids. If there is a mismatch
	687	!-- between the previuos and the actual run, netcdf_extend is returned
	688	!-- as .FALSE.
[1783]	689	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	690
	691	!
	692	!-- Remove the local file, if it can not be extended
	693	IF ( .NOT. netcdf_extend ) THEN
	694	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	695	CALL netcdf_handle_error( 'check_open', 24 )
[493]	696	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	697	#if defined( __parallel )
[1745]	698	!
	699	!-- Set a barrier in order to assure that PE0 deleted the old file
	700	!-- before any other processor tries to open a new file
[1974]	701	!-- Barrier is only needed in case of parallel I/O
	702	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	703	#endif
[1]	704	ENDIF
	705
[1745]	706	ENDIF
[1]	707
	708	IF ( .NOT. netcdf_extend ) THEN
	709	!
[1031]	710	!-- Create a new netCDF output file with requested netCDF format
[1783]	711	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	712
	713	!
[1]	714	!-- Define the header
[1783]	715	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	716
[493]	717	!
[1031]	718	!-- In case of parallel netCDF output, create flag file which tells
[493]	719	!-- combine_plot_fields that nothing is to do.
[1031]	720	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	721	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	722	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	723	CLOSE( 99 )
	724	ENDIF
	725
[1]	726	ENDIF
	727
	728	CASE ( 103, 113 )
	729	!
	730	!-- Set filename depending on unit number
	731	IF ( file_id == 103 ) THEN
[1779]	732	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	733	av = 0
	734	ELSE
[1779]	735	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	736	av = 1
	737	ENDIF
	738	!
[1031]	739	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	740	!-- be opened for extension, if its dimensions and variables match the
	741	!-- actual run.
	742	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	743
	744	IF ( netcdf_extend ) THEN
	745	!
[1031]	746	!-- Open an existing netCDF file for output
[1783]	747	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	748	!
	749	!-- Read header information and set all ids. If there is a mismatch
	750	!-- between the previuos and the actual run, netcdf_extend is returned
	751	!-- as .FALSE.
[1783]	752	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	753
	754	!
	755	!-- Remove the local file, if it can not be extended
	756	IF ( .NOT. netcdf_extend ) THEN
	757	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	758	CALL netcdf_handle_error( 'check_open', 27 )
[493]	759	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	760	#if defined( __parallel )
[1745]	761	!
	762	!-- Set a barrier in order to assure that PE0 deleted the old file
	763	!-- before any other processor tries to open a new file
[1974]	764	!-- Barrier is only needed in case of parallel I/O
	765	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	766	#endif
[1]	767	ENDIF
	768
[1745]	769	ENDIF
[1]	770
	771	IF ( .NOT. netcdf_extend ) THEN
	772	!
[1031]	773	!-- Create a new netCDF output file with requested netCDF format
[1783]	774	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	775
	776	!
[1]	777	!-- Define the header
[1783]	778	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	779
[493]	780	!
[1031]	781	!-- In case of parallel netCDF output, create flag file which tells
[493]	782	!-- combine_plot_fields that nothing is to do.
[1031]	783	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	784	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	785	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	786	CLOSE( 99 )
	787	ENDIF
	788
[1]	789	ENDIF
	790
	791	CASE ( 104 )
	792	!
[102]	793	!-- Set filename
[1779]	794	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	795
	796	!
[1031]	797	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	798	!-- be opened for extension, if its variables match the actual run.
[102]	799	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	800
	801	IF ( netcdf_extend ) THEN
	802	!
[1031]	803	!-- Open an existing netCDF file for output
[1783]	804	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	805	!
	806	!-- Read header information and set all ids. If there is a mismatch
	807	!-- between the previuos and the actual run, netcdf_extend is returned
	808	!-- as .FALSE.
[1783]	809	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	810
	811	!
	812	!-- Remove the local file, if it can not be extended
	813	IF ( .NOT. netcdf_extend ) THEN
	814	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	815	CALL netcdf_handle_error( 'check_open', 30 )
[102]	816	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	817	ENDIF
	818
	819	ENDIF
	820
	821	IF ( .NOT. netcdf_extend ) THEN
	822	!
[1031]	823	!-- Create a new netCDF output file with requested netCDF format
[1783]	824	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	825	!
	826	!-- Define the header
[1783]	827	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	828
	829	ENDIF
	830
	831	CASE ( 105 )
	832	!
[102]	833	!-- Set filename
[1779]	834	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	835
	836	!
[1031]	837	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	838	!-- be opened for extension, if its variables match the actual run.
[102]	839	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	840
	841	IF ( netcdf_extend ) THEN
	842	!
[1031]	843	!-- Open an existing netCDF file for output
[1783]	844	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	845	!
	846	!-- Read header information and set all ids. If there is a mismatch
	847	!-- between the previuos and the actual run, netcdf_extend is returned
	848	!-- as .FALSE.
[1783]	849	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	850
	851	!
	852	!-- Remove the local file, if it can not be extended
	853	IF ( .NOT. netcdf_extend ) THEN
	854	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	855	CALL netcdf_handle_error( 'check_open', 33 )
[102]	856	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	857	ENDIF
	858
	859	ENDIF
	860
	861	IF ( .NOT. netcdf_extend ) THEN
	862	!
[1031]	863	!-- Create a new netCDF output file with requested netCDF format
[1783]	864	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	865	!
	866	!-- Define the header
[1783]	867	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	868
	869	ENDIF
	870
	871
	872	CASE ( 106, 116 )
	873	!
	874	!-- Set filename depending on unit number
	875	IF ( file_id == 106 ) THEN
[1779]	876	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	877	av = 0
	878	ELSE
[1779]	879	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	880	av = 1
	881	ENDIF
	882	!
[1031]	883	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	884	!-- be opened for extension, if its dimensions and variables match the
	885	!-- actual run.
	886	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	887	IF ( netcdf_extend ) THEN
	888	!
[1031]	889	!-- Open an existing netCDF file for output
[1783]	890	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	891	!
	892	!-- Read header information and set all ids. If there is a mismatch
	893	!-- between the previuos and the actual run, netcdf_extend is returned
	894	!-- as .FALSE.
[1783]	895	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	896
	897	!
	898	!-- Remove the local file, if it can not be extended
	899	IF ( .NOT. netcdf_extend ) THEN
	900	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	901	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	902	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	903	#if defined( __parallel )
[1745]	904	!
	905	!-- Set a barrier in order to assure that PE0 deleted the old file
	906	!-- before any other processor tries to open a new file
[1974]	907	!-- Barrier is only needed in case of parallel I/O
	908	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	909	#endif
[1]	910	ENDIF
	911
[1745]	912	ENDIF
[1]	913
	914	IF ( .NOT. netcdf_extend ) THEN
	915	!
[1031]	916	!-- Create a new netCDF output file with requested netCDF format
[1783]	917	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	918
	919	!
[1]	920	!-- Define the header
[1783]	921	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	922
[493]	923	!
[1031]	924	!-- In case of parallel netCDF output, create flag file which tells
[493]	925	!-- combine_plot_fields that nothing is to do.
[1031]	926	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	927	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	928	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	929	CLOSE( 99 )
	930	ENDIF
	931
[1]	932	ENDIF
	933
	934
	935	CASE ( 107 )
	936	!
[102]	937	!-- Set filename
[1779]	938	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	939
	940	!
[1031]	941	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	942	!-- be opened for extension, if its variables match the actual run.
[102]	943	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	944
	945	IF ( netcdf_extend ) THEN
	946	!
[1031]	947	!-- Open an existing netCDF file for output
[1783]	948	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	949
[1]	950	!
	951	!-- Read header information and set all ids. If there is a mismatch
	952	!-- between the previuos and the actual run, netcdf_extend is returned
	953	!-- as .FALSE.
[1783]	954	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	955
	956	!
	957	!-- Remove the local file, if it can not be extended
	958	IF ( .NOT. netcdf_extend ) THEN
	959	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	960	CALL netcdf_handle_error( 'check_open', 39 )
[102]	961	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	962	ENDIF
	963
	964	ENDIF
	965
	966	IF ( .NOT. netcdf_extend ) THEN
	967	!
[1031]	968	!-- Create a new netCDF output file with requested netCDF format
[1783]	969	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	970	!
	971	!-- Define the header
[1783]	972	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	973
	974	ENDIF
	975
[3045]	976	!
	977	!-- Currently disabled
	978	! CASE ( 108 )
[1]	979
[3045]	980	! IF ( myid_char == '' ) THEN
	981	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
	982	! ELSE
	983	! filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	984	! myid_char
	985	! ENDIF
[1]	986	!
[1031]	987	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	988	!-- be opened for extension, if its variables match the actual run.
[3045]	989	! INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	990
[3045]	991	! IF ( netcdf_extend ) THEN
[1]	992	!
[1031]	993	!-- Open an existing netCDF file for output
[3045]	994	! CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	995	!
	996	!-- Read header information and set all ids. If there is a mismatch
	997	!-- between the previuos and the actual run, netcdf_extend is returned
	998	!-- as .FALSE.
[3045]	999	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1000
	1001	!
	1002	!-- Remove the local file, if it can not be extended
[3045]	1003	! IF ( .NOT. netcdf_extend ) THEN
	1004	! nc_stat = NF90_CLOSE( id_set_prt )
	1005	! CALL netcdf_handle_error( 'check_open', 42 )
	1006	! CALL local_system( 'rm ' // TRIM( filename ) )
	1007	! ENDIF
[1]	1008
[3045]	1009	! ENDIF
[1]	1010
[3045]	1011	! IF ( .NOT. netcdf_extend ) THEN
[1]	1012
	1013	!
	1014	!-- For runs on multiple processors create the subdirectory
[3045]	1015	! IF ( myid_char /= '' ) THEN
	1016	! IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1017	! THEN ! needs modification in case of non-extendable sets
	1018	! CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
	1019	! TRIM( coupling_char ) // '/' )
	1020	! ENDIF
[1804]	1021	#if defined( __parallel )
[807]	1022	!
[1]	1023	!-- Set a barrier in order to allow that all other processors in the
	1024	!-- directory created by PE0 can open their file
[3045]	1025	! CALL MPI_BARRIER( comm2d, ierr )
[1]	1026	#endif
[3045]	1027	! ENDIF
[1]	1028
	1029	!
[1031]	1030	!-- Create a new netCDF output file with requested netCDF format
[3045]	1031	! CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1032
	1033	!
[1]	1034	!-- Define the header
[3045]	1035	! CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1036
[3045]	1037	! ENDIF
[1]	1038
	1039	CASE ( 109 )
	1040	!
[102]	1041	!-- Set filename
[1779]	1042	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1043
	1044	!
[1031]	1045	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1046	!-- be opened for extension, if its variables match the actual run.
[102]	1047	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1048
	1049	IF ( netcdf_extend ) THEN
	1050	!
[1031]	1051	!-- Open an existing netCDF file for output
[1783]	1052	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1053	!
	1054	!-- Read header information and set all ids. If there is a mismatch
	1055	!-- between the previuos and the actual run, netcdf_extend is returned
	1056	!-- as .FALSE.
[1783]	1057	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1058
	1059	!
	1060	!-- Remove the local file, if it can not be extended
	1061	IF ( .NOT. netcdf_extend ) THEN
	1062	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1063	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1064	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1065	ENDIF
	1066
	1067	ENDIF
	1068
	1069	IF ( .NOT. netcdf_extend ) THEN
	1070	!
[1031]	1071	!-- Create a new netCDF output file with requested netCDF format
[1783]	1072	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1073	!
	1074	!-- Define the header
[1783]	1075	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1076
	1077	ENDIF
[410]	1078
[1468]	1079	!
[1957]	1080	!-- nc-file for virtual flight measurements
	1081	CASE ( 199 )
	1082	!
	1083	!-- Set filename
	1084	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1085
[1957]	1086	!
	1087	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1088	!-- be opened for extension, if its variables match the actual run.
	1089	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1090
[1957]	1091	IF ( netcdf_extend ) THEN
	1092	!
	1093	!-- Open an existing netCDF file for output
	1094	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1095	!
	1096	!-- Read header information and set all ids. If there is a mismatch
	1097	!-- between the previuos and the actual run, netcdf_extend is returned
	1098	!-- as .FALSE.
	1099	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1100
	1101	!
	1102	!-- Remove the local file, if it can not be extended
	1103	IF ( .NOT. netcdf_extend ) THEN
	1104	nc_stat = NF90_CLOSE( id_set_fl )
	1105	CALL netcdf_handle_error( 'check_open', 533 )
	1106	CALL local_system( 'rm ' // TRIM( filename ) )
	1107	ENDIF
	1108
	1109	ENDIF
	1110
	1111	IF ( .NOT. netcdf_extend ) THEN
	1112	!
	1113	!-- Create a new netCDF output file with requested netCDF format
	1114	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1115	!
	1116	!-- Define the header
	1117	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1118
	1119	ENDIF
	1120
	1121
[564]	1122	CASE ( 201:200+2*max_masks )
[410]	1123	!
	1124	!-- Set filename depending on unit number
[564]	1125	IF ( file_id <= 200+max_masks ) THEN
	1126	mid = file_id - 200
[2669]	1127	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1128	filename = 'DATA_MASK_NETCDF' // TRIM( coupling_char ) // &
	1129	mask_char
[410]	1130	av = 0
	1131	ELSE
[564]	1132	mid = file_id - (200+max_masks)
[2669]	1133	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1134	filename = 'DATA_MASK_AV_NETCDF' // TRIM( coupling_char ) // &
	1135	mask_char
[410]	1136	av = 1
	1137	ENDIF
	1138	!
[1031]	1139	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1140	!-- be opened for extension, if its dimensions and variables match the
	1141	!-- actual run.
	1142	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1143
	1144	IF ( netcdf_extend ) THEN
	1145	!
[1031]	1146	!-- Open an existing netCDF file for output
[1783]	1147	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1148	.TRUE., 456 )
[410]	1149	!
	1150	!-- Read header information and set all ids. If there is a mismatch
	1151	!-- between the previuos and the actual run, netcdf_extend is returned
	1152	!-- as .FALSE.
[1783]	1153	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1154
[410]	1155	!
	1156	!-- Remove the local file, if it can not be extended
	1157	IF ( .NOT. netcdf_extend ) THEN
	1158	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1159	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1160	CALL local_system('rm ' // TRIM( filename ) )
	1161	ENDIF
[1]	1162
[410]	1163	ENDIF
	1164
	1165	IF ( .NOT. netcdf_extend ) THEN
[1]	1166	!
[1031]	1167	!-- Create a new netCDF output file with requested netCDF format
[1783]	1168	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1169	!
[410]	1170	!-- Define the header
[1783]	1171	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1172
	1173	ENDIF
	1174
	1175
	1176	#else
	1177
[564]	1178	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1179
	1180	!
[1]	1181	!-- Nothing is done in case of missing netcdf support
	1182	RETURN
	1183
	1184	#endif
	1185
	1186	CASE DEFAULT
	1187
[247]	1188	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1189	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1190
	1191	END SELECT
	1192
	1193	!
	1194	!-- Set open flag
	1195	openfile(file_id)%opened = .TRUE.
	1196
	1197	!
	1198	!-- Formats
[1320]	1199	3300 FORMAT ('#'/ &
	1200	'coord 1 file=',A,' filetype=unformatted'/ &
	1201	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1202	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
[1]	1203	'#')
	1204	4000 FORMAT ('# ',A)
[1320]	1205	5000 FORMAT ('# ',A/ &
	1206	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1207	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1208	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
[1]	1209	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
[1320]	1210	8000 FORMAT (A/ &
[1359]	1211	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1212	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1213	109('-'))
[1]	1214
	1215	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |