Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 2969

Last change on this file since 2969 was 2964, checked in by Giersch, 7 years ago
Bugfix in the calculation of fixed number of output time levels for parallel netcdf output, error message related to reading sky view factors revised
Property svn:keywords set to `Id`
File size: 43.0 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[2696]	14	! You should have received a copy of the GNU General Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2718]	17	! Copyright 1997-2018 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[2516]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 2964 2018-04-12 16:04:03Z thiele $
[2964]	27	! Error message moved to radiation_model_mod
	28	!
	29	! 2957 2018-04-11 08:48:06Z Giersch
[2957]	30	! Error message has been corrected in case of writing sky view factors
	31	!
	32	! 2906 2018-03-19 08:56:40Z Giersch
[2906]	33	! CASE 88 and 89 has been added for the input/output of sky view factors
	34	!
	35	! 2718 2018-01-02 08:49:38Z maronga
[2716]	36	! Corrected "Former revisions" section
	37	!
	38	! 2696 2017-12-14 17:12:51Z kanani
	39	! Change in file header (GPL part)
	40	!
	41	! 2669 2017-12-06 16:03:27Z raasch
[2669]	42	! file name extension for masked data files is changed to "_M##" and is now
	43	! appended at the end of the filename,
	44	! file ids not used any more have been removed
	45	!
	46	! 2516 2017-10-04 11:03:04Z suehring
[2516]	47	! Remove tabs
	48	!
	49	! 2514 2017-10-04 09:52:37Z suehring
[2512]	50	! upper bounds of cross section and 3d output changed from nx+1,ny+1 to nx,ny
	51	! no output of ghost layer data
	52	! iso2d-related parts removed
	53	!
	54	! 2300 2017-06-29 13:31:14Z raasch
[2300]	55	! -host
	56	!
	57	! 2298 2017-06-29 09:28:18Z raasch
[2298]	58	! -return_addres, return_username, avs_coor_file_..., avs_data_file_...,
	59	! cross_ts_numbers, cross_ts_number_count
[1321]	60	!
[2298]	61	! 2101 2017-01-05 16:42:31Z suehring
	62	!
[2064]	63	! 2063 2016-11-10 17:14:35Z raasch
	64	! bugfix: opening of PROGRESS file moved out of the NetCDF block
	65	!
[2041]	66	! 2040 2016-10-26 16:58:09Z gronemeier
[2040]	67	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
	68	!
[2001]	69	! 2000 2016-08-20 18:09:15Z knoop
	70	! Forced header and separation lines into 80 columns
	71	!
[1989]	72	! 1988 2016-08-10 14:49:06Z gronemeier
	73	! informative message added if files cannot be opened in newly created directory
	74	!
[1987]	75	! 1986 2016-08-10 14:07:17Z gronemeier
	76	! Bugfix: check if output can be opened in newly created directory. If not
	77	! wait one second and try again.
	78	!
[1975]	79	! 1974 2016-07-26 08:43:25Z gronemeier
	80	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	81	! in case of parallel I/O
	82	!
[1958]	83	! 1957 2016-07-07 10:43:48Z suehring
	84	! flight module added
	85	!
[1805]	86	! 1804 2016-04-05 16:30:18Z maronga
	87	! Removed code for parameter file check (__check)
	88	!
[1784]	89	! 1783 2016-03-06 18:36:17Z raasch
	90	! name change of netcdf routines and module + related changes
	91	!
[1780]	92	! 1779 2016-03-03 08:01:28Z raasch
	93	! coupling_char is trimmed at every place it occurs, because it can have
	94	! different length now
	95	!
[1746]	96	! 1745 2016-02-05 13:06:51Z gronemeier
	97	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	98	!
[1683]	99	! 1682 2015-10-07 23:56:08Z knoop
	100	! Code annotations made doxygen readable
	101	!
[1552]	102	! 1551 2015-03-03 14:18:16Z maronga
	103	! Removed redundant output for combine_plot_fields
	104	!
[1469]	105	! 1468 2014-09-24 14:06:57Z maronga
	106	! Adapted for use on up to 6-digit processor cores
	107	! Added file unit 117 (PROGRESS)
	108	!
[1360]	109	! 1359 2014-04-11 17:15:14Z hoffmann
	110	! Format of particle exchange statistics extended to reasonable numbers of
	111	! particles.
	112	!
[1354]	113	! 1353 2014-04-08 15:21:23Z heinze
	114	! REAL constants provided with KIND-attribute,
	115	! declaration for unused variables xkoor, ykoor, zkoor removed
	116	!
[1329]	117	! 1327 2014-03-21 11:00:16Z raasch
	118	! parts concerning iso2d and avs output removed
	119	!
[1321]	120	! 1320 2014-03-20 08:40:49Z raasch
[1320]	121	! ONLY-attribute added to USE-statements,
	122	! kind-parameters added to all INTEGER and REAL declaration statements,
	123	! kinds are defined in new module kinds,
	124	! old module precision_kind is removed,
	125	! revision history before 2012 removed,
	126	! comment fields (!:) to be used for variable explanations added to
	127	! all variable declaration statements
[1]	128	!
[1107]	129	! 1106 2013-03-04 05:31:38Z raasch
	130	! array_kind renamed precision_kind
	131	!
[1093]	132	! 1092 2013-02-02 11:24:22Z raasch
	133	! unused variables removed
	134	!
[1037]	135	! 1036 2012-10-22 13:43:42Z raasch
	136	! code put under GPL (PALM 3.9)
	137	!
[1035]	138	! 1031 2012-10-19 14:35:30Z raasch
	139	! netCDF4 without parallel file support implemented,
	140	! opening of netCDF files are done by new routines create_netcdf_file and
	141	! open_write_netcdf_file
	142	!
[965]	143	! 964 2012-07-26 09:14:24Z raasch
	144	! old profil-units (40:49) removed,
	145	! append feature removed from unit 14
	146	!
[850]	147	! 849 2012-03-15 10:35:09Z raasch
	148	! comment changed
	149	!
[810]	150	! 809 2012-01-30 13:32:58Z maronga
	151	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	152	!
[808]	153	! 807 2012-01-25 11:53:51Z maronga
	154	! New cpp directive "__check" implemented which is used by check_namelist_files
	155	!
[1]	156	! Revision 1.1 1997/08/11 06:10:55 raasch
	157	! Initial revision
	158	!
	159	!
	160	! Description:
	161	! ------------
[1682]	162	!> Check if file unit is open. If not, open file and, if necessary, write a
	163	!> header or start other initializing actions, respectively.
[1]	164	!------------------------------------------------------------------------------!
[1682]	165	SUBROUTINE check_open( file_id )
	166
[1]	167
[1320]	168	USE arrays_3d, &
	169	ONLY: zu
	170
	171	USE control_parameters, &
[2964]	172	ONLY: coupling_char, data_output_2d_on_each_pe, &
	173	max_masks, message_string, mid, nz_do3d, openfile, &
	174	run_description_header, runnr
[1320]	175
	176	USE grid_variables, &
	177	ONLY: dx, dy
	178
	179	USE indices, &
[1551]	180	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
[1320]	181
	182	USE kinds
	183
[1783]	184	#if defined( __netcdf )
	185	USE NETCDF
	186	#endif
[1320]	187
[1783]	188	USE netcdf_interface, &
[1957]	189	ONLY: id_set_fl, id_set_mask, id_set_pr, id_set_prt, id_set_pts, &
	190	id_set_sp, id_set_ts, id_set_xy, id_set_xz, id_set_yz, &
	191	id_set_3d, nc_stat, netcdf_create_file, netcdf_data_format, &
	192	netcdf_define_header, netcdf_handle_error, netcdf_open_write_file
[1783]	193
[1320]	194	USE particle_attributes, &
	195	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	196	particle_groups
	197
[1]	198	USE pegrid
	199
[1986]	200	USE posix_calls_from_fortran, &
	201	ONLY: fortran_sleep
	202
[1320]	203
[1]	204	IMPLICIT NONE
	205
[2669]	206	CHARACTER (LEN=4) :: mask_char !<
[1682]	207	CHARACTER (LEN=2) :: suffix !<
	208	CHARACTER (LEN=30) :: filename !<
	209	CHARACTER (LEN=80) :: rtext !<
	210	CHARACTER (LEN=100) :: line !<
[1]	211
[1682]	212	INTEGER(iwp) :: av !<
	213	INTEGER(iwp) :: file_id !<
	214	INTEGER(iwp) :: i !<
[1986]	215	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[1682]	216	INTEGER(iwp) :: j !<
	217	INTEGER(iwp) :: k !<
[1320]	218
[2512]	219	LOGICAL :: netcdf_extend !<
[1]	220
	221	!
	222	!-- Immediate return if file already open
	223	IF ( openfile(file_id)%opened ) RETURN
	224
	225	!
	226	!-- Only certain files are allowed to be re-opened
	227	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	228	!-- has not been checked so far, if it works!
	229	IF ( openfile(file_id)%opened_before ) THEN
	230	SELECT CASE ( file_id )
[2669]	231	CASE ( 13, 14, 21, 22, 23, 80, 85, 117 )
[1]	232	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	233	message_string = 're-open of unit ' // &
[274]	234	'14 is not verified. Please check results!'
[247]	235	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	236	ENDIF
[143]	237
[1]	238	CASE DEFAULT
[1320]	239	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	240	' is not allowed'
[247]	241	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	242
[1]	243	RETURN
[143]	244
[1]	245	END SELECT
	246	ENDIF
	247
	248	!
	249	!-- Check if file may be opened on the relevant PE
	250	SELECT CASE ( file_id )
	251
[2669]	252	CASE ( 15, 16, 17, 18, 19, 50:59, 104:105, 107, 109, 117 )
[2514]	253
[493]	254	IF ( myid /= 0 ) THEN
[1320]	255	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	256	' not allowed for PE ',myid
	257	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	258	ENDIF
	259
[564]	260	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	261
[1031]	262	IF ( netcdf_data_format < 5 ) THEN
[247]	263
[410]	264	IF ( myid /= 0 ) THEN
[1320]	265	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	266	' not allowed for PE ',myid
	267	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	268	ENDIF
[2514]	269
[493]	270	ENDIF
[1]	271
	272	CASE ( 21, 22, 23 )
	273
	274	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	275	IF ( myid /= 0 ) THEN
[1320]	276	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	277	' not allowed for PE ',myid
[277]	278	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	279	END IF
[1]	280	ENDIF
	281
[2669]	282	CASE ( 90:99 )
[1]	283
	284	!
	285	!-- File-ids that are used temporarily in other routines
[1320]	286	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	287	' is not allowed since it is used otherwise'
[247]	288	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	289
[1]	290	END SELECT
	291
	292	!
	293	!-- Open relevant files
	294	SELECT CASE ( file_id )
	295
	296	CASE ( 11 )
	297
[1779]	298	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
[102]	299	STATUS='OLD' )
[1]	300
	301	CASE ( 13 )
	302
	303	IF ( myid_char == '' ) THEN
[1779]	304	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	305	FORM='UNFORMATTED', STATUS='OLD' )
[1]	306	ELSE
[143]	307	!
[1468]	308	!-- First opening of unit 13 openes file _000000 on all PEs because
	309	!-- only this file contains the global variables
[143]	310	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	311	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	312	FORM='UNFORMATTED', STATUS='OLD' )
	313	ELSE
[1779]	314	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	315	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	316	ENDIF
[1]	317	ENDIF
	318
	319	CASE ( 14 )
	320
	321	IF ( myid_char == '' ) THEN
[1779]	322	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	323	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	324	ELSE
	325	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	326	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	327	ENDIF
[1804]	328	#if defined( __parallel )
[1]	329	!
	330	!-- Set a barrier in order to allow that all other processors in the
	331	!-- directory created by PE0 can open their file
	332	CALL MPI_BARRIER( comm2d, ierr )
	333	#endif
[1986]	334	ioerr = 1
	335	DO WHILE ( ioerr /= 0 )
	336	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	337	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	338	IF ( ioerr /= 0 ) THEN
	339	WRITE( 9, * ) '*** could not open "BINOUT'// &
	340	TRIM(coupling_char)//'/'//myid_char// &
	341	'"! Trying again in 1 sec.'
	342	CALL fortran_sleep( 1 )
	343	ENDIF
[1986]	344	ENDDO
	345
[1]	346	ENDIF
	347
	348	CASE ( 15 )
	349
[1779]	350	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	351	FORM='FORMATTED' )
[1]	352
	353	CASE ( 16 )
	354
[1779]	355	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	356	FORM='FORMATTED' )
[1]	357
	358	CASE ( 17 )
	359
[1779]	360	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	361	FORM='FORMATTED' )
[1]	362
	363	CASE ( 18 )
	364
[1779]	365	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	366	FORM='FORMATTED' )
[1]	367
	368	CASE ( 19 )
	369
[1779]	370	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	371
	372	CASE ( 20 )
	373
	374	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	375	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	376	ENDIF
	377	IF ( myid_char == '' ) THEN
[1779]	378	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	379	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	380	ELSE
[1804]	381	#if defined( __parallel )
[1]	382	!
	383	!-- Set a barrier in order to allow that all other processors in the
	384	!-- directory created by PE0 can open their file
	385	CALL MPI_BARRIER( comm2d, ierr )
	386	#endif
[1986]	387	ioerr = 1
	388	DO WHILE ( ioerr /= 0 )
	389	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	390	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	391	IOSTAT=ioerr )
[1988]	392	IF ( ioerr /= 0 ) THEN
	393	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	394	TRIM( coupling_char )//'/'//myid_char// &
	395	'"! Trying again in 1 sec.'
	396	CALL fortran_sleep( 1 )
	397	ENDIF
[1986]	398	ENDDO
	399
[1]	400	ENDIF
	401
	402	CASE ( 21 )
	403
	404	IF ( data_output_2d_on_each_pe ) THEN
[1320]	405	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	406	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	407	ELSE
[1779]	408	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	409	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	410	ENDIF
	411
	412	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	413	!
[2512]	414	!-- Write index bounds of total domain for combine_plot_fields
[1]	415	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	416	WRITE (21) 0, nx, 0, ny
[1]	417	ENDIF
	418
	419	ENDIF
	420
	421	CASE ( 22 )
	422
	423	IF ( data_output_2d_on_each_pe ) THEN
[1320]	424	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	425	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	426	ELSE
[1779]	427	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	428	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	429	ENDIF
	430
	431	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	432	!
[2512]	433	!-- Write index bounds of total domain for combine_plot_fields
[1]	434	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	435	WRITE (22) 0, nx, 0, nz+1 ! output part
[1]	436	ENDIF
	437
	438	ENDIF
	439
	440	CASE ( 23 )
	441
	442	IF ( data_output_2d_on_each_pe ) THEN
[1320]	443	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	444	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	445	ELSE
[1779]	446	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	447	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	448	ENDIF
	449
	450	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	451	!
[2512]	452	!-- Write index bounds of total domain for combine_plot_fields
[1]	453	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	454	WRITE (23) 0, ny, 0, nz+1 ! output part
[1]	455	ENDIF
	456
	457	ENDIF
	458
	459	CASE ( 30 )
	460
[1320]	461	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	462	FORM='UNFORMATTED' )
[1]	463	!
[2512]	464	!-- Specifications for combine_plot_fields
[1]	465	IF ( myid == 0 ) THEN
	466	#if defined( __parallel )
[2512]	467	WRITE ( 30 ) 0, nx, 0, ny, 0, nz_do3d
[1]	468	#endif
	469	ENDIF
	470
	471	CASE ( 80 )
	472
	473	IF ( myid_char == '' ) THEN
[105]	474	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	475	FORM='FORMATTED', POSITION='APPEND' )
[1]	476	ELSE
	477	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	478	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	479	TRIM( coupling_char ) )
[1]	480	ENDIF
[1804]	481	#if defined( __parallel )
[1]	482	!
	483	!-- Set a barrier in order to allow that thereafter all other
	484	!-- processors in the directory created by PE0 can open their file.
	485	!-- WARNING: The following barrier will lead to hanging jobs, if
	486	!-- check_open is first called from routine
	487	!-- allocate_prt_memory!
	488	IF ( .NOT. openfile(80)%opened_before ) THEN
	489	CALL MPI_BARRIER( comm2d, ierr )
	490	ENDIF
	491	#endif
[1320]	492	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	493	myid_char, &
[102]	494	FORM='FORMATTED', POSITION='APPEND' )
[1]	495	ENDIF
	496
	497	IF ( .NOT. openfile(80)%opened_before ) THEN
	498	WRITE ( 80, 8000 ) TRIM( run_description_header )
	499	ENDIF
	500
	501	CASE ( 85 )
	502
	503	IF ( myid_char == '' ) THEN
[1320]	504	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	505	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	506	ELSE
	507	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	508	CALL local_system( 'mkdir PARTICLE_DATA' // &
	509	TRIM( coupling_char ) )
[1]	510	ENDIF
[1804]	511	#if defined( __parallel )
[1]	512	!
	513	!-- Set a barrier in order to allow that thereafter all other
	514	!-- processors in the directory created by PE0 can open their file
	515	CALL MPI_BARRIER( comm2d, ierr )
	516	#endif
[1986]	517	ioerr = 1
	518	DO WHILE ( ioerr /= 0 )
	519	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	520	myid_char, &
	521	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	522	IF ( ioerr /= 0 ) THEN
[2906]	523	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	524	TRIM( coupling_char )//'/'//myid_char// &
[1988]	525	'"! Trying again in 1 sec.'
	526	CALL fortran_sleep( 1 )
	527	ENDIF
[1986]	528	ENDDO
	529
[1]	530	ENDIF
	531
	532	IF ( .NOT. openfile(85)%opened_before ) THEN
	533	WRITE ( 85 ) run_description_header
	534	!
	535	!-- Attention: change version number whenever the output format on
[849]	536	!-- unit 85 is changed (see also in routine
	537	!-- lpm_data_output_particles)
[1359]	538	rtext = 'data format version 3.1'
[1]	539	WRITE ( 85 ) rtext
[1320]	540	WRITE ( 85 ) number_of_particle_groups, &
[1]	541	max_number_of_particle_groups
	542	WRITE ( 85 ) particle_groups
[1359]	543	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	544	ENDIF
	545
[2063]	546	!
[2906]	547	!-- File where sky-view factors and further required data is stored will be
	548	!-- read
	549	CASE ( 88 )
	550
	551	IF ( myid_char == '' ) THEN
	552	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//myid_char, &
	553	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	554	ELSE
	555
	556	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//'/'//myid_char, &
	557	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	558	ENDIF
	559
	560	!
	561	!-- File where sky-view factors and further required data is stored will be
	562	!-- created
	563	CASE ( 89 )
	564
	565	IF ( myid_char == '' ) THEN
	566	OPEN ( 89, FILE='SVFOUT'//TRIM( coupling_char )//myid_char, &
	567	FORM='UNFORMATTED', STATUS='NEW' )
	568	ELSE
	569	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	570	CALL local_system( 'mkdir SVFOUT' // TRIM( coupling_char ) )
	571	ENDIF
	572	#if defined( __parallel )
	573	!
	574	!-- Set a barrier in order to allow that all other processors in the
	575	!-- directory created by PE0 can open their file
	576	CALL MPI_BARRIER( comm2d, ierr )
	577	#endif
	578	ioerr = 1
	579	DO WHILE ( ioerr /= 0 )
	580	OPEN ( 89, FILE='SVFOUT'//TRIM(coupling_char)//'/'//myid_char, &
	581	FORM='UNFORMATTED', STATUS='NEW', IOSTAT=ioerr )
	582	IF ( ioerr /= 0 ) THEN
[2957]	583	WRITE( 9, * ) '*** could not open "SVFOUT'// &
	584	TRIM(coupling_char)//'/'//myid_char// &
[2906]	585	'"! Trying again in 1 sec.'
	586	CALL fortran_sleep( 1 )
	587	ENDIF
	588	ENDDO
	589
	590	ENDIF
	591
	592	!
[2063]	593	!-- Progress file that is used by the PALM watchdog
	594	CASE ( 117 )
	595
	596	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	597	STATUS='REPLACE', FORM='FORMATTED' )
	598
[1]	599	#if defined( __netcdf )
	600	CASE ( 101, 111 )
	601	!
	602	!-- Set filename depending on unit number
	603	IF ( file_id == 101 ) THEN
[1779]	604	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	605	av = 0
	606	ELSE
[1779]	607	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	608	av = 1
	609	ENDIF
	610	!
[1031]	611	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	612	!-- be opened for extension, if its dimensions and variables match the
	613	!-- actual run.
	614	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	615	IF ( netcdf_extend ) THEN
	616	!
[1031]	617	!-- Open an existing netCDF file for output
[1783]	618	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	619	!
	620	!-- Read header information and set all ids. If there is a mismatch
	621	!-- between the previuos and the actual run, netcdf_extend is returned
	622	!-- as .FALSE.
[1783]	623	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	624
	625	!
	626	!-- Remove the local file, if it can not be extended
	627	IF ( .NOT. netcdf_extend ) THEN
	628	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	629	CALL netcdf_handle_error( 'check_open', 21 )
[493]	630	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	631	#if defined( __parallel )
[1745]	632	!
	633	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	634	!-- before any other processor tries to open a new file.
	635	!-- Barrier is only needed in case of parallel I/O
	636	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	637	#endif
[1]	638	ENDIF
	639
[1745]	640	ENDIF
[1]	641
	642	IF ( .NOT. netcdf_extend ) THEN
	643	!
[1031]	644	!-- Create a new netCDF output file with requested netCDF format
[1783]	645	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	646
	647	!
[1]	648	!-- Define the header
[1783]	649	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	650
[493]	651	!
[1031]	652	!-- In case of parallel netCDF output, create flag file which tells
[493]	653	!-- combine_plot_fields that nothing is to do.
[1031]	654	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	655	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	656	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	657	CLOSE( 99 )
	658	ENDIF
	659
[1]	660	ENDIF
	661
	662	CASE ( 102, 112 )
	663	!
	664	!-- Set filename depending on unit number
	665	IF ( file_id == 102 ) THEN
[1779]	666	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	667	av = 0
	668	ELSE
[1779]	669	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	670	av = 1
	671	ENDIF
	672	!
[1031]	673	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	674	!-- be opened for extension, if its dimensions and variables match the
	675	!-- actual run.
	676	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	677
	678	IF ( netcdf_extend ) THEN
	679	!
[1031]	680	!-- Open an existing netCDF file for output
[1783]	681	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	682	!
	683	!-- Read header information and set all ids. If there is a mismatch
	684	!-- between the previuos and the actual run, netcdf_extend is returned
	685	!-- as .FALSE.
[1783]	686	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	687
	688	!
	689	!-- Remove the local file, if it can not be extended
	690	IF ( .NOT. netcdf_extend ) THEN
	691	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	692	CALL netcdf_handle_error( 'check_open', 24 )
[493]	693	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	694	#if defined( __parallel )
[1745]	695	!
	696	!-- Set a barrier in order to assure that PE0 deleted the old file
	697	!-- before any other processor tries to open a new file
[1974]	698	!-- Barrier is only needed in case of parallel I/O
	699	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	700	#endif
[1]	701	ENDIF
	702
[1745]	703	ENDIF
[1]	704
	705	IF ( .NOT. netcdf_extend ) THEN
	706	!
[1031]	707	!-- Create a new netCDF output file with requested netCDF format
[1783]	708	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	709
	710	!
[1]	711	!-- Define the header
[1783]	712	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	713
[493]	714	!
[1031]	715	!-- In case of parallel netCDF output, create flag file which tells
[493]	716	!-- combine_plot_fields that nothing is to do.
[1031]	717	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	718	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	719	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	720	CLOSE( 99 )
	721	ENDIF
	722
[1]	723	ENDIF
	724
	725	CASE ( 103, 113 )
	726	!
	727	!-- Set filename depending on unit number
	728	IF ( file_id == 103 ) THEN
[1779]	729	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	730	av = 0
	731	ELSE
[1779]	732	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	733	av = 1
	734	ENDIF
	735	!
[1031]	736	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	737	!-- be opened for extension, if its dimensions and variables match the
	738	!-- actual run.
	739	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	740
	741	IF ( netcdf_extend ) THEN
	742	!
[1031]	743	!-- Open an existing netCDF file for output
[1783]	744	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	745	!
	746	!-- Read header information and set all ids. If there is a mismatch
	747	!-- between the previuos and the actual run, netcdf_extend is returned
	748	!-- as .FALSE.
[1783]	749	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	750
	751	!
	752	!-- Remove the local file, if it can not be extended
	753	IF ( .NOT. netcdf_extend ) THEN
	754	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	755	CALL netcdf_handle_error( 'check_open', 27 )
[493]	756	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	757	#if defined( __parallel )
[1745]	758	!
	759	!-- Set a barrier in order to assure that PE0 deleted the old file
	760	!-- before any other processor tries to open a new file
[1974]	761	!-- Barrier is only needed in case of parallel I/O
	762	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	763	#endif
[1]	764	ENDIF
	765
[1745]	766	ENDIF
[1]	767
	768	IF ( .NOT. netcdf_extend ) THEN
	769	!
[1031]	770	!-- Create a new netCDF output file with requested netCDF format
[1783]	771	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	772
	773	!
[1]	774	!-- Define the header
[1783]	775	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	776
[493]	777	!
[1031]	778	!-- In case of parallel netCDF output, create flag file which tells
[493]	779	!-- combine_plot_fields that nothing is to do.
[1031]	780	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	781	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	782	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	783	CLOSE( 99 )
	784	ENDIF
	785
[1]	786	ENDIF
	787
	788	CASE ( 104 )
	789	!
[102]	790	!-- Set filename
[1779]	791	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	792
	793	!
[1031]	794	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	795	!-- be opened for extension, if its variables match the actual run.
[102]	796	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	797
	798	IF ( netcdf_extend ) THEN
	799	!
[1031]	800	!-- Open an existing netCDF file for output
[1783]	801	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	802	!
	803	!-- Read header information and set all ids. If there is a mismatch
	804	!-- between the previuos and the actual run, netcdf_extend is returned
	805	!-- as .FALSE.
[1783]	806	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	807
	808	!
	809	!-- Remove the local file, if it can not be extended
	810	IF ( .NOT. netcdf_extend ) THEN
	811	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	812	CALL netcdf_handle_error( 'check_open', 30 )
[102]	813	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	814	ENDIF
	815
	816	ENDIF
	817
	818	IF ( .NOT. netcdf_extend ) THEN
	819	!
[1031]	820	!-- Create a new netCDF output file with requested netCDF format
[1783]	821	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	822	!
	823	!-- Define the header
[1783]	824	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	825
	826	ENDIF
	827
	828	CASE ( 105 )
	829	!
[102]	830	!-- Set filename
[1779]	831	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	832
	833	!
[1031]	834	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	835	!-- be opened for extension, if its variables match the actual run.
[102]	836	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	837
	838	IF ( netcdf_extend ) THEN
	839	!
[1031]	840	!-- Open an existing netCDF file for output
[1783]	841	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	842	!
	843	!-- Read header information and set all ids. If there is a mismatch
	844	!-- between the previuos and the actual run, netcdf_extend is returned
	845	!-- as .FALSE.
[1783]	846	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	847
	848	!
	849	!-- Remove the local file, if it can not be extended
	850	IF ( .NOT. netcdf_extend ) THEN
	851	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	852	CALL netcdf_handle_error( 'check_open', 33 )
[102]	853	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	854	ENDIF
	855
	856	ENDIF
	857
	858	IF ( .NOT. netcdf_extend ) THEN
	859	!
[1031]	860	!-- Create a new netCDF output file with requested netCDF format
[1783]	861	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	862	!
	863	!-- Define the header
[1783]	864	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	865
	866	ENDIF
	867
	868
	869	CASE ( 106, 116 )
	870	!
	871	!-- Set filename depending on unit number
	872	IF ( file_id == 106 ) THEN
[1779]	873	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	874	av = 0
	875	ELSE
[1779]	876	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	877	av = 1
	878	ENDIF
	879	!
[1031]	880	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	881	!-- be opened for extension, if its dimensions and variables match the
	882	!-- actual run.
	883	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	884	IF ( netcdf_extend ) THEN
	885	!
[1031]	886	!-- Open an existing netCDF file for output
[1783]	887	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	888	!
	889	!-- Read header information and set all ids. If there is a mismatch
	890	!-- between the previuos and the actual run, netcdf_extend is returned
	891	!-- as .FALSE.
[1783]	892	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	893
	894	!
	895	!-- Remove the local file, if it can not be extended
	896	IF ( .NOT. netcdf_extend ) THEN
	897	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	898	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	899	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	900	#if defined( __parallel )
[1745]	901	!
	902	!-- Set a barrier in order to assure that PE0 deleted the old file
	903	!-- before any other processor tries to open a new file
[1974]	904	!-- Barrier is only needed in case of parallel I/O
	905	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	906	#endif
[1]	907	ENDIF
	908
[1745]	909	ENDIF
[1]	910
	911	IF ( .NOT. netcdf_extend ) THEN
	912	!
[1031]	913	!-- Create a new netCDF output file with requested netCDF format
[1783]	914	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	915
	916	!
[1]	917	!-- Define the header
[1783]	918	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	919
[493]	920	!
[1031]	921	!-- In case of parallel netCDF output, create flag file which tells
[493]	922	!-- combine_plot_fields that nothing is to do.
[1031]	923	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	924	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	925	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	926	CLOSE( 99 )
	927	ENDIF
	928
[1]	929	ENDIF
	930
	931
	932	CASE ( 107 )
	933	!
[102]	934	!-- Set filename
[1779]	935	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	936
	937	!
[1031]	938	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	939	!-- be opened for extension, if its variables match the actual run.
[102]	940	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	941
	942	IF ( netcdf_extend ) THEN
	943	!
[1031]	944	!-- Open an existing netCDF file for output
[1783]	945	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	946
[1]	947	!
	948	!-- Read header information and set all ids. If there is a mismatch
	949	!-- between the previuos and the actual run, netcdf_extend is returned
	950	!-- as .FALSE.
[1783]	951	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	952
	953	!
	954	!-- Remove the local file, if it can not be extended
	955	IF ( .NOT. netcdf_extend ) THEN
	956	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	957	CALL netcdf_handle_error( 'check_open', 39 )
[102]	958	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	959	ENDIF
	960
	961	ENDIF
	962
	963	IF ( .NOT. netcdf_extend ) THEN
	964	!
[1031]	965	!-- Create a new netCDF output file with requested netCDF format
[1783]	966	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	967	!
	968	!-- Define the header
[1783]	969	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	970
	971	ENDIF
	972
	973
	974	CASE ( 108 )
	975
	976	IF ( myid_char == '' ) THEN
[1779]	977	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
[1]	978	ELSE
[1320]	979	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
[105]	980	myid_char
[1]	981	ENDIF
	982	!
[1031]	983	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	984	!-- be opened for extension, if its variables match the actual run.
	985	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	986
	987	IF ( netcdf_extend ) THEN
	988	!
[1031]	989	!-- Open an existing netCDF file for output
[1783]	990	CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	991	!
	992	!-- Read header information and set all ids. If there is a mismatch
	993	!-- between the previuos and the actual run, netcdf_extend is returned
	994	!-- as .FALSE.
[1783]	995	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	996
	997	!
	998	!-- Remove the local file, if it can not be extended
	999	IF ( .NOT. netcdf_extend ) THEN
	1000	nc_stat = NF90_CLOSE( id_set_prt )
[1783]	1001	CALL netcdf_handle_error( 'check_open', 42 )
[1745]	1002	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1003	ENDIF
	1004
	1005	ENDIF
	1006
	1007	IF ( .NOT. netcdf_extend ) THEN
	1008
	1009	!
	1010	!-- For runs on multiple processors create the subdirectory
	1011	IF ( myid_char /= '' ) THEN
[1320]	1012	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
[1]	1013	THEN ! needs modification in case of non-extendable sets
[1320]	1014	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1015	TRIM( coupling_char ) // '/' )
[1]	1016	ENDIF
[1804]	1017	#if defined( __parallel )
[807]	1018	!
[1]	1019	!-- Set a barrier in order to allow that all other processors in the
	1020	!-- directory created by PE0 can open their file
	1021	CALL MPI_BARRIER( comm2d, ierr )
	1022	#endif
	1023	ENDIF
	1024
	1025	!
[1031]	1026	!-- Create a new netCDF output file with requested netCDF format
[1783]	1027	CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1028
	1029	!
[1]	1030	!-- Define the header
[1783]	1031	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1032
	1033	ENDIF
	1034
	1035	CASE ( 109 )
	1036	!
[102]	1037	!-- Set filename
[1779]	1038	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1039
	1040	!
[1031]	1041	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1042	!-- be opened for extension, if its variables match the actual run.
[102]	1043	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1044
	1045	IF ( netcdf_extend ) THEN
	1046	!
[1031]	1047	!-- Open an existing netCDF file for output
[1783]	1048	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1049	!
	1050	!-- Read header information and set all ids. If there is a mismatch
	1051	!-- between the previuos and the actual run, netcdf_extend is returned
	1052	!-- as .FALSE.
[1783]	1053	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1054
	1055	!
	1056	!-- Remove the local file, if it can not be extended
	1057	IF ( .NOT. netcdf_extend ) THEN
	1058	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1059	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1060	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1061	ENDIF
	1062
	1063	ENDIF
	1064
	1065	IF ( .NOT. netcdf_extend ) THEN
	1066	!
[1031]	1067	!-- Create a new netCDF output file with requested netCDF format
[1783]	1068	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1069	!
	1070	!-- Define the header
[1783]	1071	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1072
	1073	ENDIF
[410]	1074
[1468]	1075	!
[1957]	1076	!-- nc-file for virtual flight measurements
	1077	CASE ( 199 )
	1078	!
	1079	!-- Set filename
	1080	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1081
[1957]	1082	!
	1083	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1084	!-- be opened for extension, if its variables match the actual run.
	1085	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1086
[1957]	1087	IF ( netcdf_extend ) THEN
	1088	!
	1089	!-- Open an existing netCDF file for output
	1090	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1091	!
	1092	!-- Read header information and set all ids. If there is a mismatch
	1093	!-- between the previuos and the actual run, netcdf_extend is returned
	1094	!-- as .FALSE.
	1095	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1096
	1097	!
	1098	!-- Remove the local file, if it can not be extended
	1099	IF ( .NOT. netcdf_extend ) THEN
	1100	nc_stat = NF90_CLOSE( id_set_fl )
	1101	CALL netcdf_handle_error( 'check_open', 533 )
	1102	CALL local_system( 'rm ' // TRIM( filename ) )
	1103	ENDIF
	1104
	1105	ENDIF
	1106
	1107	IF ( .NOT. netcdf_extend ) THEN
	1108	!
	1109	!-- Create a new netCDF output file with requested netCDF format
	1110	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1111	!
	1112	!-- Define the header
	1113	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1114
	1115	ENDIF
	1116
	1117
[564]	1118	CASE ( 201:200+2*max_masks )
[410]	1119	!
	1120	!-- Set filename depending on unit number
[564]	1121	IF ( file_id <= 200+max_masks ) THEN
	1122	mid = file_id - 200
[2669]	1123	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1124	filename = 'DATA_MASK_NETCDF' // TRIM( coupling_char ) // &
	1125	mask_char
[410]	1126	av = 0
	1127	ELSE
[564]	1128	mid = file_id - (200+max_masks)
[2669]	1129	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1130	filename = 'DATA_MASK_AV_NETCDF' // TRIM( coupling_char ) // &
	1131	mask_char
[410]	1132	av = 1
	1133	ENDIF
	1134	!
[1031]	1135	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1136	!-- be opened for extension, if its dimensions and variables match the
	1137	!-- actual run.
	1138	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1139
	1140	IF ( netcdf_extend ) THEN
	1141	!
[1031]	1142	!-- Open an existing netCDF file for output
[1783]	1143	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1144	.TRUE., 456 )
[410]	1145	!
	1146	!-- Read header information and set all ids. If there is a mismatch
	1147	!-- between the previuos and the actual run, netcdf_extend is returned
	1148	!-- as .FALSE.
[1783]	1149	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1150
[410]	1151	!
	1152	!-- Remove the local file, if it can not be extended
	1153	IF ( .NOT. netcdf_extend ) THEN
	1154	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1155	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1156	CALL local_system('rm ' // TRIM( filename ) )
	1157	ENDIF
[1]	1158
[410]	1159	ENDIF
	1160
	1161	IF ( .NOT. netcdf_extend ) THEN
[1]	1162	!
[1031]	1163	!-- Create a new netCDF output file with requested netCDF format
[1783]	1164	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1165	!
[410]	1166	!-- Define the header
[1783]	1167	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1168
	1169	ENDIF
	1170
	1171
	1172	#else
	1173
[564]	1174	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1175
	1176	!
[1]	1177	!-- Nothing is done in case of missing netcdf support
	1178	RETURN
	1179
	1180	#endif
	1181
	1182	CASE DEFAULT
	1183
[247]	1184	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1185	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1186
	1187	END SELECT
	1188
	1189	!
	1190	!-- Set open flag
	1191	openfile(file_id)%opened = .TRUE.
	1192
	1193	!
	1194	!-- Formats
[1320]	1195	3300 FORMAT ('#'/ &
	1196	'coord 1 file=',A,' filetype=unformatted'/ &
	1197	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1198	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
[1]	1199	'#')
	1200	4000 FORMAT ('# ',A)
[1320]	1201	5000 FORMAT ('# ',A/ &
	1202	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1203	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1204	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
[1]	1205	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
[1320]	1206	8000 FORMAT (A/ &
[1359]	1207	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1208	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1209	109('-'))
[1]	1210
	1211	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |