Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 2958

Last change on this file since 2958 was 2957, checked in by Giersch, 6 years ago
Sky view factors will always be read from file now in case of automatic restarts, corrected error message in case of writing sky view factors
Property svn:keywords set to `Id`
File size: 43.3 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[2696]	14	! You should have received a copy of the GNU General Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2718]	17	! Copyright 1997-2018 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[2516]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 2957 2018-04-11 08:48:06Z suehring $
[2957]	27	! Error message has been corrected in case of writing sky view factors
	28	!
	29	! 2906 2018-03-19 08:56:40Z Giersch
[2906]	30	! CASE 88 and 89 has been added for the input/output of sky view factors
	31	!
	32	! 2718 2018-01-02 08:49:38Z maronga
[2716]	33	! Corrected "Former revisions" section
	34	!
	35	! 2696 2017-12-14 17:12:51Z kanani
	36	! Change in file header (GPL part)
	37	!
	38	! 2669 2017-12-06 16:03:27Z raasch
[2669]	39	! file name extension for masked data files is changed to "_M##" and is now
	40	! appended at the end of the filename,
	41	! file ids not used any more have been removed
	42	!
	43	! 2516 2017-10-04 11:03:04Z suehring
[2516]	44	! Remove tabs
	45	!
	46	! 2514 2017-10-04 09:52:37Z suehring
[2512]	47	! upper bounds of cross section and 3d output changed from nx+1,ny+1 to nx,ny
	48	! no output of ghost layer data
	49	! iso2d-related parts removed
	50	!
	51	! 2300 2017-06-29 13:31:14Z raasch
[2300]	52	! -host
	53	!
	54	! 2298 2017-06-29 09:28:18Z raasch
[2298]	55	! -return_addres, return_username, avs_coor_file_..., avs_data_file_...,
	56	! cross_ts_numbers, cross_ts_number_count
[1321]	57	!
[2298]	58	! 2101 2017-01-05 16:42:31Z suehring
	59	!
[2064]	60	! 2063 2016-11-10 17:14:35Z raasch
	61	! bugfix: opening of PROGRESS file moved out of the NetCDF block
	62	!
[2041]	63	! 2040 2016-10-26 16:58:09Z gronemeier
[2040]	64	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
	65	!
[2001]	66	! 2000 2016-08-20 18:09:15Z knoop
	67	! Forced header and separation lines into 80 columns
	68	!
[1989]	69	! 1988 2016-08-10 14:49:06Z gronemeier
	70	! informative message added if files cannot be opened in newly created directory
	71	!
[1987]	72	! 1986 2016-08-10 14:07:17Z gronemeier
	73	! Bugfix: check if output can be opened in newly created directory. If not
	74	! wait one second and try again.
	75	!
[1975]	76	! 1974 2016-07-26 08:43:25Z gronemeier
	77	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	78	! in case of parallel I/O
	79	!
[1958]	80	! 1957 2016-07-07 10:43:48Z suehring
	81	! flight module added
	82	!
[1805]	83	! 1804 2016-04-05 16:30:18Z maronga
	84	! Removed code for parameter file check (__check)
	85	!
[1784]	86	! 1783 2016-03-06 18:36:17Z raasch
	87	! name change of netcdf routines and module + related changes
	88	!
[1780]	89	! 1779 2016-03-03 08:01:28Z raasch
	90	! coupling_char is trimmed at every place it occurs, because it can have
	91	! different length now
	92	!
[1746]	93	! 1745 2016-02-05 13:06:51Z gronemeier
	94	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	95	!
[1683]	96	! 1682 2015-10-07 23:56:08Z knoop
	97	! Code annotations made doxygen readable
	98	!
[1552]	99	! 1551 2015-03-03 14:18:16Z maronga
	100	! Removed redundant output for combine_plot_fields
	101	!
[1469]	102	! 1468 2014-09-24 14:06:57Z maronga
	103	! Adapted for use on up to 6-digit processor cores
	104	! Added file unit 117 (PROGRESS)
	105	!
[1360]	106	! 1359 2014-04-11 17:15:14Z hoffmann
	107	! Format of particle exchange statistics extended to reasonable numbers of
	108	! particles.
	109	!
[1354]	110	! 1353 2014-04-08 15:21:23Z heinze
	111	! REAL constants provided with KIND-attribute,
	112	! declaration for unused variables xkoor, ykoor, zkoor removed
	113	!
[1329]	114	! 1327 2014-03-21 11:00:16Z raasch
	115	! parts concerning iso2d and avs output removed
	116	!
[1321]	117	! 1320 2014-03-20 08:40:49Z raasch
[1320]	118	! ONLY-attribute added to USE-statements,
	119	! kind-parameters added to all INTEGER and REAL declaration statements,
	120	! kinds are defined in new module kinds,
	121	! old module precision_kind is removed,
	122	! revision history before 2012 removed,
	123	! comment fields (!:) to be used for variable explanations added to
	124	! all variable declaration statements
[1]	125	!
[1107]	126	! 1106 2013-03-04 05:31:38Z raasch
	127	! array_kind renamed precision_kind
	128	!
[1093]	129	! 1092 2013-02-02 11:24:22Z raasch
	130	! unused variables removed
	131	!
[1037]	132	! 1036 2012-10-22 13:43:42Z raasch
	133	! code put under GPL (PALM 3.9)
	134	!
[1035]	135	! 1031 2012-10-19 14:35:30Z raasch
	136	! netCDF4 without parallel file support implemented,
	137	! opening of netCDF files are done by new routines create_netcdf_file and
	138	! open_write_netcdf_file
	139	!
[965]	140	! 964 2012-07-26 09:14:24Z raasch
	141	! old profil-units (40:49) removed,
	142	! append feature removed from unit 14
	143	!
[850]	144	! 849 2012-03-15 10:35:09Z raasch
	145	! comment changed
	146	!
[810]	147	! 809 2012-01-30 13:32:58Z maronga
	148	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	149	!
[808]	150	! 807 2012-01-25 11:53:51Z maronga
	151	! New cpp directive "__check" implemented which is used by check_namelist_files
	152	!
[1]	153	! Revision 1.1 1997/08/11 06:10:55 raasch
	154	! Initial revision
	155	!
	156	!
	157	! Description:
	158	! ------------
[1682]	159	!> Check if file unit is open. If not, open file and, if necessary, write a
	160	!> header or start other initializing actions, respectively.
[1]	161	!------------------------------------------------------------------------------!
[1682]	162	SUBROUTINE check_open( file_id )
	163
[1]	164
[1320]	165	USE arrays_3d, &
	166	ONLY: zu
	167
	168	USE control_parameters, &
[2300]	169	ONLY: coupling_char, data_output_2d_on_each_pe, max_masks, &
[2298]	170	message_string, mid, nz_do3d, openfile, run_description_header, &
	171	runnr
[1320]	172
	173	USE grid_variables, &
	174	ONLY: dx, dy
	175
	176	USE indices, &
[1551]	177	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
[1320]	178
	179	USE kinds
	180
[1783]	181	#if defined( __netcdf )
	182	USE NETCDF
	183	#endif
[1320]	184
[1783]	185	USE netcdf_interface, &
[1957]	186	ONLY: id_set_fl, id_set_mask, id_set_pr, id_set_prt, id_set_pts, &
	187	id_set_sp, id_set_ts, id_set_xy, id_set_xz, id_set_yz, &
	188	id_set_3d, nc_stat, netcdf_create_file, netcdf_data_format, &
	189	netcdf_define_header, netcdf_handle_error, netcdf_open_write_file
[1783]	190
[1320]	191	USE particle_attributes, &
	192	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	193	particle_groups
	194
[1]	195	USE pegrid
	196
[1986]	197	USE posix_calls_from_fortran, &
	198	ONLY: fortran_sleep
	199
[1320]	200
[1]	201	IMPLICIT NONE
	202
[2669]	203	CHARACTER (LEN=4) :: mask_char !<
[1682]	204	CHARACTER (LEN=2) :: suffix !<
	205	CHARACTER (LEN=30) :: filename !<
	206	CHARACTER (LEN=80) :: rtext !<
	207	CHARACTER (LEN=100) :: line !<
[1]	208
[1682]	209	INTEGER(iwp) :: av !<
	210	INTEGER(iwp) :: file_id !<
	211	INTEGER(iwp) :: i !<
[1986]	212	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[1682]	213	INTEGER(iwp) :: j !<
	214	INTEGER(iwp) :: k !<
[1320]	215
[2512]	216	LOGICAL :: netcdf_extend !<
[1]	217
	218	!
	219	!-- Immediate return if file already open
	220	IF ( openfile(file_id)%opened ) RETURN
	221
	222	!
	223	!-- Only certain files are allowed to be re-opened
	224	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	225	!-- has not been checked so far, if it works!
	226	IF ( openfile(file_id)%opened_before ) THEN
	227	SELECT CASE ( file_id )
[2669]	228	CASE ( 13, 14, 21, 22, 23, 80, 85, 117 )
[1]	229	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	230	message_string = 're-open of unit ' // &
[274]	231	'14 is not verified. Please check results!'
[247]	232	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	233	ENDIF
[143]	234
[1]	235	CASE DEFAULT
[1320]	236	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	237	' is not allowed'
[247]	238	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	239
[1]	240	RETURN
[143]	241
[1]	242	END SELECT
	243	ENDIF
	244
	245	!
	246	!-- Check if file may be opened on the relevant PE
	247	SELECT CASE ( file_id )
	248
[2669]	249	CASE ( 15, 16, 17, 18, 19, 50:59, 104:105, 107, 109, 117 )
[2514]	250
[493]	251	IF ( myid /= 0 ) THEN
[1320]	252	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	253	' not allowed for PE ',myid
	254	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	255	ENDIF
	256
[564]	257	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	258
[1031]	259	IF ( netcdf_data_format < 5 ) THEN
[247]	260
[410]	261	IF ( myid /= 0 ) THEN
[1320]	262	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	263	' not allowed for PE ',myid
	264	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	265	ENDIF
[2514]	266
[493]	267	ENDIF
[1]	268
	269	CASE ( 21, 22, 23 )
	270
	271	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	272	IF ( myid /= 0 ) THEN
[1320]	273	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	274	' not allowed for PE ',myid
[277]	275	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	276	END IF
[1]	277	ENDIF
	278
[2669]	279	CASE ( 90:99 )
[1]	280
	281	!
	282	!-- File-ids that are used temporarily in other routines
[1320]	283	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	284	' is not allowed since it is used otherwise'
[247]	285	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	286
[1]	287	END SELECT
	288
	289	!
	290	!-- Open relevant files
	291	SELECT CASE ( file_id )
	292
	293	CASE ( 11 )
	294
[1779]	295	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
[102]	296	STATUS='OLD' )
[1]	297
	298	CASE ( 13 )
	299
	300	IF ( myid_char == '' ) THEN
[1779]	301	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	302	FORM='UNFORMATTED', STATUS='OLD' )
[1]	303	ELSE
[143]	304	!
[1468]	305	!-- First opening of unit 13 openes file _000000 on all PEs because
	306	!-- only this file contains the global variables
[143]	307	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	308	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	309	FORM='UNFORMATTED', STATUS='OLD' )
	310	ELSE
[1779]	311	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	312	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	313	ENDIF
[1]	314	ENDIF
	315
	316	CASE ( 14 )
	317
	318	IF ( myid_char == '' ) THEN
[1779]	319	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	320	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	321	ELSE
	322	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	323	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	324	ENDIF
[1804]	325	#if defined( __parallel )
[1]	326	!
	327	!-- Set a barrier in order to allow that all other processors in the
	328	!-- directory created by PE0 can open their file
	329	CALL MPI_BARRIER( comm2d, ierr )
	330	#endif
[1986]	331	ioerr = 1
	332	DO WHILE ( ioerr /= 0 )
	333	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	334	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	335	IF ( ioerr /= 0 ) THEN
	336	WRITE( 9, * ) '*** could not open "BINOUT'// &
	337	TRIM(coupling_char)//'/'//myid_char// &
	338	'"! Trying again in 1 sec.'
	339	CALL fortran_sleep( 1 )
	340	ENDIF
[1986]	341	ENDDO
	342
[1]	343	ENDIF
	344
	345	CASE ( 15 )
	346
[1779]	347	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	348	FORM='FORMATTED' )
[1]	349
	350	CASE ( 16 )
	351
[1779]	352	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	353	FORM='FORMATTED' )
[1]	354
	355	CASE ( 17 )
	356
[1779]	357	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	358	FORM='FORMATTED' )
[1]	359
	360	CASE ( 18 )
	361
[1779]	362	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	363	FORM='FORMATTED' )
[1]	364
	365	CASE ( 19 )
	366
[1779]	367	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	368
	369	CASE ( 20 )
	370
	371	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	372	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	373	ENDIF
	374	IF ( myid_char == '' ) THEN
[1779]	375	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	376	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	377	ELSE
[1804]	378	#if defined( __parallel )
[1]	379	!
	380	!-- Set a barrier in order to allow that all other processors in the
	381	!-- directory created by PE0 can open their file
	382	CALL MPI_BARRIER( comm2d, ierr )
	383	#endif
[1986]	384	ioerr = 1
	385	DO WHILE ( ioerr /= 0 )
	386	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	387	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	388	IOSTAT=ioerr )
[1988]	389	IF ( ioerr /= 0 ) THEN
	390	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	391	TRIM( coupling_char )//'/'//myid_char// &
	392	'"! Trying again in 1 sec.'
	393	CALL fortran_sleep( 1 )
	394	ENDIF
[1986]	395	ENDDO
	396
[1]	397	ENDIF
	398
	399	CASE ( 21 )
	400
	401	IF ( data_output_2d_on_each_pe ) THEN
[1320]	402	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	403	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	404	ELSE
[1779]	405	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	406	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	407	ENDIF
	408
	409	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	410	!
[2512]	411	!-- Write index bounds of total domain for combine_plot_fields
[1]	412	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	413	WRITE (21) 0, nx, 0, ny
[1]	414	ENDIF
	415
	416	ENDIF
	417
	418	CASE ( 22 )
	419
	420	IF ( data_output_2d_on_each_pe ) THEN
[1320]	421	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	422	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	423	ELSE
[1779]	424	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	425	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	426	ENDIF
	427
	428	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	429	!
[2512]	430	!-- Write index bounds of total domain for combine_plot_fields
[1]	431	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	432	WRITE (22) 0, nx, 0, nz+1 ! output part
[1]	433	ENDIF
	434
	435	ENDIF
	436
	437	CASE ( 23 )
	438
	439	IF ( data_output_2d_on_each_pe ) THEN
[1320]	440	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	441	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	442	ELSE
[1779]	443	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	444	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	445	ENDIF
	446
	447	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	448	!
[2512]	449	!-- Write index bounds of total domain for combine_plot_fields
[1]	450	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	451	WRITE (23) 0, ny, 0, nz+1 ! output part
[1]	452	ENDIF
	453
	454	ENDIF
	455
	456	CASE ( 30 )
	457
[1320]	458	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	459	FORM='UNFORMATTED' )
[1]	460	!
[2512]	461	!-- Specifications for combine_plot_fields
[1]	462	IF ( myid == 0 ) THEN
	463	#if defined( __parallel )
[2512]	464	WRITE ( 30 ) 0, nx, 0, ny, 0, nz_do3d
[1]	465	#endif
	466	ENDIF
	467
	468	CASE ( 80 )
	469
	470	IF ( myid_char == '' ) THEN
[105]	471	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	472	FORM='FORMATTED', POSITION='APPEND' )
[1]	473	ELSE
	474	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	475	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	476	TRIM( coupling_char ) )
[1]	477	ENDIF
[1804]	478	#if defined( __parallel )
[1]	479	!
	480	!-- Set a barrier in order to allow that thereafter all other
	481	!-- processors in the directory created by PE0 can open their file.
	482	!-- WARNING: The following barrier will lead to hanging jobs, if
	483	!-- check_open is first called from routine
	484	!-- allocate_prt_memory!
	485	IF ( .NOT. openfile(80)%opened_before ) THEN
	486	CALL MPI_BARRIER( comm2d, ierr )
	487	ENDIF
	488	#endif
[1320]	489	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	490	myid_char, &
[102]	491	FORM='FORMATTED', POSITION='APPEND' )
[1]	492	ENDIF
	493
	494	IF ( .NOT. openfile(80)%opened_before ) THEN
	495	WRITE ( 80, 8000 ) TRIM( run_description_header )
	496	ENDIF
	497
	498	CASE ( 85 )
	499
	500	IF ( myid_char == '' ) THEN
[1320]	501	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	502	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	503	ELSE
	504	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	505	CALL local_system( 'mkdir PARTICLE_DATA' // &
	506	TRIM( coupling_char ) )
[1]	507	ENDIF
[1804]	508	#if defined( __parallel )
[1]	509	!
	510	!-- Set a barrier in order to allow that thereafter all other
	511	!-- processors in the directory created by PE0 can open their file
	512	CALL MPI_BARRIER( comm2d, ierr )
	513	#endif
[1986]	514	ioerr = 1
	515	DO WHILE ( ioerr /= 0 )
	516	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	517	myid_char, &
	518	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	519	IF ( ioerr /= 0 ) THEN
[2906]	520	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	521	TRIM( coupling_char )//'/'//myid_char// &
[1988]	522	'"! Trying again in 1 sec.'
	523	CALL fortran_sleep( 1 )
	524	ENDIF
[1986]	525	ENDDO
	526
[1]	527	ENDIF
	528
	529	IF ( .NOT. openfile(85)%opened_before ) THEN
	530	WRITE ( 85 ) run_description_header
	531	!
	532	!-- Attention: change version number whenever the output format on
[849]	533	!-- unit 85 is changed (see also in routine
	534	!-- lpm_data_output_particles)
[1359]	535	rtext = 'data format version 3.1'
[1]	536	WRITE ( 85 ) rtext
[1320]	537	WRITE ( 85 ) number_of_particle_groups, &
[1]	538	max_number_of_particle_groups
	539	WRITE ( 85 ) particle_groups
[1359]	540	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	541	ENDIF
	542
[2063]	543	!
[2906]	544	!-- File where sky-view factors and further required data is stored will be
	545	!-- read
	546	CASE ( 88 )
	547
	548	IF (numprocs_previous_run /= numprocs) THEN
	549	WRITE( message_string, * ) 'A different number of processors', &
	550	' between the run that has written', &
	551	' the svf data and the one that will ',&
	552	' read it is not allowed'
	553	CALL message( 'check_open', 'PA0484', 1, 2, 0, 6, 0 )
	554	ENDIF
	555
	556	IF ( myid_char == '' ) THEN
	557	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//myid_char, &
	558	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	559	ELSE
	560
	561	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//'/'//myid_char, &
	562	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	563	ENDIF
	564
	565	!
	566	!-- File where sky-view factors and further required data is stored will be
	567	!-- created
	568	CASE ( 89 )
	569
	570	IF ( myid_char == '' ) THEN
	571	OPEN ( 89, FILE='SVFOUT'//TRIM( coupling_char )//myid_char, &
	572	FORM='UNFORMATTED', STATUS='NEW' )
	573	ELSE
	574	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	575	CALL local_system( 'mkdir SVFOUT' // TRIM( coupling_char ) )
	576	ENDIF
	577	#if defined( __parallel )
	578	!
	579	!-- Set a barrier in order to allow that all other processors in the
	580	!-- directory created by PE0 can open their file
	581	CALL MPI_BARRIER( comm2d, ierr )
	582	#endif
	583	ioerr = 1
	584	DO WHILE ( ioerr /= 0 )
	585	OPEN ( 89, FILE='SVFOUT'//TRIM(coupling_char)//'/'//myid_char, &
	586	FORM='UNFORMATTED', STATUS='NEW', IOSTAT=ioerr )
	587	IF ( ioerr /= 0 ) THEN
[2957]	588	WRITE( 9, * ) '*** could not open "SVFOUT'// &
	589	TRIM(coupling_char)//'/'//myid_char// &
[2906]	590	'"! Trying again in 1 sec.'
	591	CALL fortran_sleep( 1 )
	592	ENDIF
	593	ENDDO
	594
	595	ENDIF
	596
	597	!
[2063]	598	!-- Progress file that is used by the PALM watchdog
	599	CASE ( 117 )
	600
	601	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	602	STATUS='REPLACE', FORM='FORMATTED' )
	603
[1]	604	#if defined( __netcdf )
	605	CASE ( 101, 111 )
	606	!
	607	!-- Set filename depending on unit number
	608	IF ( file_id == 101 ) THEN
[1779]	609	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	610	av = 0
	611	ELSE
[1779]	612	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	613	av = 1
	614	ENDIF
	615	!
[1031]	616	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	617	!-- be opened for extension, if its dimensions and variables match the
	618	!-- actual run.
	619	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	620	IF ( netcdf_extend ) THEN
	621	!
[1031]	622	!-- Open an existing netCDF file for output
[1783]	623	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	624	!
	625	!-- Read header information and set all ids. If there is a mismatch
	626	!-- between the previuos and the actual run, netcdf_extend is returned
	627	!-- as .FALSE.
[1783]	628	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	629
	630	!
	631	!-- Remove the local file, if it can not be extended
	632	IF ( .NOT. netcdf_extend ) THEN
	633	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	634	CALL netcdf_handle_error( 'check_open', 21 )
[493]	635	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	636	#if defined( __parallel )
[1745]	637	!
	638	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	639	!-- before any other processor tries to open a new file.
	640	!-- Barrier is only needed in case of parallel I/O
	641	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	642	#endif
[1]	643	ENDIF
	644
[1745]	645	ENDIF
[1]	646
	647	IF ( .NOT. netcdf_extend ) THEN
	648	!
[1031]	649	!-- Create a new netCDF output file with requested netCDF format
[1783]	650	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	651
	652	!
[1]	653	!-- Define the header
[1783]	654	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	655
[493]	656	!
[1031]	657	!-- In case of parallel netCDF output, create flag file which tells
[493]	658	!-- combine_plot_fields that nothing is to do.
[1031]	659	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	660	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	661	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	662	CLOSE( 99 )
	663	ENDIF
	664
[1]	665	ENDIF
	666
	667	CASE ( 102, 112 )
	668	!
	669	!-- Set filename depending on unit number
	670	IF ( file_id == 102 ) THEN
[1779]	671	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	672	av = 0
	673	ELSE
[1779]	674	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	675	av = 1
	676	ENDIF
	677	!
[1031]	678	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	679	!-- be opened for extension, if its dimensions and variables match the
	680	!-- actual run.
	681	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	682
	683	IF ( netcdf_extend ) THEN
	684	!
[1031]	685	!-- Open an existing netCDF file for output
[1783]	686	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	687	!
	688	!-- Read header information and set all ids. If there is a mismatch
	689	!-- between the previuos and the actual run, netcdf_extend is returned
	690	!-- as .FALSE.
[1783]	691	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	692
	693	!
	694	!-- Remove the local file, if it can not be extended
	695	IF ( .NOT. netcdf_extend ) THEN
	696	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	697	CALL netcdf_handle_error( 'check_open', 24 )
[493]	698	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	699	#if defined( __parallel )
[1745]	700	!
	701	!-- Set a barrier in order to assure that PE0 deleted the old file
	702	!-- before any other processor tries to open a new file
[1974]	703	!-- Barrier is only needed in case of parallel I/O
	704	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	705	#endif
[1]	706	ENDIF
	707
[1745]	708	ENDIF
[1]	709
	710	IF ( .NOT. netcdf_extend ) THEN
	711	!
[1031]	712	!-- Create a new netCDF output file with requested netCDF format
[1783]	713	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	714
	715	!
[1]	716	!-- Define the header
[1783]	717	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	718
[493]	719	!
[1031]	720	!-- In case of parallel netCDF output, create flag file which tells
[493]	721	!-- combine_plot_fields that nothing is to do.
[1031]	722	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	723	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	724	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	725	CLOSE( 99 )
	726	ENDIF
	727
[1]	728	ENDIF
	729
	730	CASE ( 103, 113 )
	731	!
	732	!-- Set filename depending on unit number
	733	IF ( file_id == 103 ) THEN
[1779]	734	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	735	av = 0
	736	ELSE
[1779]	737	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	738	av = 1
	739	ENDIF
	740	!
[1031]	741	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	742	!-- be opened for extension, if its dimensions and variables match the
	743	!-- actual run.
	744	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	745
	746	IF ( netcdf_extend ) THEN
	747	!
[1031]	748	!-- Open an existing netCDF file for output
[1783]	749	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	750	!
	751	!-- Read header information and set all ids. If there is a mismatch
	752	!-- between the previuos and the actual run, netcdf_extend is returned
	753	!-- as .FALSE.
[1783]	754	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	755
	756	!
	757	!-- Remove the local file, if it can not be extended
	758	IF ( .NOT. netcdf_extend ) THEN
	759	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	760	CALL netcdf_handle_error( 'check_open', 27 )
[493]	761	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	762	#if defined( __parallel )
[1745]	763	!
	764	!-- Set a barrier in order to assure that PE0 deleted the old file
	765	!-- before any other processor tries to open a new file
[1974]	766	!-- Barrier is only needed in case of parallel I/O
	767	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	768	#endif
[1]	769	ENDIF
	770
[1745]	771	ENDIF
[1]	772
	773	IF ( .NOT. netcdf_extend ) THEN
	774	!
[1031]	775	!-- Create a new netCDF output file with requested netCDF format
[1783]	776	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	777
	778	!
[1]	779	!-- Define the header
[1783]	780	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	781
[493]	782	!
[1031]	783	!-- In case of parallel netCDF output, create flag file which tells
[493]	784	!-- combine_plot_fields that nothing is to do.
[1031]	785	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	786	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	787	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	788	CLOSE( 99 )
	789	ENDIF
	790
[1]	791	ENDIF
	792
	793	CASE ( 104 )
	794	!
[102]	795	!-- Set filename
[1779]	796	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	797
	798	!
[1031]	799	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	800	!-- be opened for extension, if its variables match the actual run.
[102]	801	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	802
	803	IF ( netcdf_extend ) THEN
	804	!
[1031]	805	!-- Open an existing netCDF file for output
[1783]	806	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	807	!
	808	!-- Read header information and set all ids. If there is a mismatch
	809	!-- between the previuos and the actual run, netcdf_extend is returned
	810	!-- as .FALSE.
[1783]	811	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	812
	813	!
	814	!-- Remove the local file, if it can not be extended
	815	IF ( .NOT. netcdf_extend ) THEN
	816	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	817	CALL netcdf_handle_error( 'check_open', 30 )
[102]	818	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	819	ENDIF
	820
	821	ENDIF
	822
	823	IF ( .NOT. netcdf_extend ) THEN
	824	!
[1031]	825	!-- Create a new netCDF output file with requested netCDF format
[1783]	826	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	827	!
	828	!-- Define the header
[1783]	829	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	830
	831	ENDIF
	832
	833	CASE ( 105 )
	834	!
[102]	835	!-- Set filename
[1779]	836	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	837
	838	!
[1031]	839	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	840	!-- be opened for extension, if its variables match the actual run.
[102]	841	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	842
	843	IF ( netcdf_extend ) THEN
	844	!
[1031]	845	!-- Open an existing netCDF file for output
[1783]	846	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	847	!
	848	!-- Read header information and set all ids. If there is a mismatch
	849	!-- between the previuos and the actual run, netcdf_extend is returned
	850	!-- as .FALSE.
[1783]	851	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	852
	853	!
	854	!-- Remove the local file, if it can not be extended
	855	IF ( .NOT. netcdf_extend ) THEN
	856	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	857	CALL netcdf_handle_error( 'check_open', 33 )
[102]	858	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	859	ENDIF
	860
	861	ENDIF
	862
	863	IF ( .NOT. netcdf_extend ) THEN
	864	!
[1031]	865	!-- Create a new netCDF output file with requested netCDF format
[1783]	866	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	867	!
	868	!-- Define the header
[1783]	869	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	870
	871	ENDIF
	872
	873
	874	CASE ( 106, 116 )
	875	!
	876	!-- Set filename depending on unit number
	877	IF ( file_id == 106 ) THEN
[1779]	878	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	879	av = 0
	880	ELSE
[1779]	881	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	882	av = 1
	883	ENDIF
	884	!
[1031]	885	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	886	!-- be opened for extension, if its dimensions and variables match the
	887	!-- actual run.
	888	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	889
	890	IF ( netcdf_extend ) THEN
	891	!
[1031]	892	!-- Open an existing netCDF file for output
[1783]	893	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	894	!
	895	!-- Read header information and set all ids. If there is a mismatch
	896	!-- between the previuos and the actual run, netcdf_extend is returned
	897	!-- as .FALSE.
[1783]	898	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	899
	900	!
	901	!-- Remove the local file, if it can not be extended
	902	IF ( .NOT. netcdf_extend ) THEN
	903	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	904	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	905	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	906	#if defined( __parallel )
[1745]	907	!
	908	!-- Set a barrier in order to assure that PE0 deleted the old file
	909	!-- before any other processor tries to open a new file
[1974]	910	!-- Barrier is only needed in case of parallel I/O
	911	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	912	#endif
[1]	913	ENDIF
	914
[1745]	915	ENDIF
[1]	916
	917	IF ( .NOT. netcdf_extend ) THEN
	918	!
[1031]	919	!-- Create a new netCDF output file with requested netCDF format
[1783]	920	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	921
	922	!
[1]	923	!-- Define the header
[1783]	924	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	925
[493]	926	!
[1031]	927	!-- In case of parallel netCDF output, create flag file which tells
[493]	928	!-- combine_plot_fields that nothing is to do.
[1031]	929	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	930	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	931	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	932	CLOSE( 99 )
	933	ENDIF
	934
[1]	935	ENDIF
	936
	937
	938	CASE ( 107 )
	939	!
[102]	940	!-- Set filename
[1779]	941	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	942
	943	!
[1031]	944	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	945	!-- be opened for extension, if its variables match the actual run.
[102]	946	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	947
	948	IF ( netcdf_extend ) THEN
	949	!
[1031]	950	!-- Open an existing netCDF file for output
[1783]	951	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	952
[1]	953	!
	954	!-- Read header information and set all ids. If there is a mismatch
	955	!-- between the previuos and the actual run, netcdf_extend is returned
	956	!-- as .FALSE.
[1783]	957	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	958
	959	!
	960	!-- Remove the local file, if it can not be extended
	961	IF ( .NOT. netcdf_extend ) THEN
	962	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	963	CALL netcdf_handle_error( 'check_open', 39 )
[102]	964	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	965	ENDIF
	966
	967	ENDIF
	968
	969	IF ( .NOT. netcdf_extend ) THEN
	970	!
[1031]	971	!-- Create a new netCDF output file with requested netCDF format
[1783]	972	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	973	!
	974	!-- Define the header
[1783]	975	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	976
	977	ENDIF
	978
	979
	980	CASE ( 108 )
	981
	982	IF ( myid_char == '' ) THEN
[1779]	983	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
[1]	984	ELSE
[1320]	985	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
[105]	986	myid_char
[1]	987	ENDIF
	988	!
[1031]	989	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	990	!-- be opened for extension, if its variables match the actual run.
	991	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	992
	993	IF ( netcdf_extend ) THEN
	994	!
[1031]	995	!-- Open an existing netCDF file for output
[1783]	996	CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	997	!
	998	!-- Read header information and set all ids. If there is a mismatch
	999	!-- between the previuos and the actual run, netcdf_extend is returned
	1000	!-- as .FALSE.
[1783]	1001	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1002
	1003	!
	1004	!-- Remove the local file, if it can not be extended
	1005	IF ( .NOT. netcdf_extend ) THEN
	1006	nc_stat = NF90_CLOSE( id_set_prt )
[1783]	1007	CALL netcdf_handle_error( 'check_open', 42 )
[1745]	1008	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1009	ENDIF
	1010
	1011	ENDIF
	1012
	1013	IF ( .NOT. netcdf_extend ) THEN
	1014
	1015	!
	1016	!-- For runs on multiple processors create the subdirectory
	1017	IF ( myid_char /= '' ) THEN
[1320]	1018	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
[1]	1019	THEN ! needs modification in case of non-extendable sets
[1320]	1020	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1021	TRIM( coupling_char ) // '/' )
[1]	1022	ENDIF
[1804]	1023	#if defined( __parallel )
[807]	1024	!
[1]	1025	!-- Set a barrier in order to allow that all other processors in the
	1026	!-- directory created by PE0 can open their file
	1027	CALL MPI_BARRIER( comm2d, ierr )
	1028	#endif
	1029	ENDIF
	1030
	1031	!
[1031]	1032	!-- Create a new netCDF output file with requested netCDF format
[1783]	1033	CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1034
	1035	!
[1]	1036	!-- Define the header
[1783]	1037	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1038
	1039	ENDIF
	1040
	1041	CASE ( 109 )
	1042	!
[102]	1043	!-- Set filename
[1779]	1044	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1045
	1046	!
[1031]	1047	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1048	!-- be opened for extension, if its variables match the actual run.
[102]	1049	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1050
	1051	IF ( netcdf_extend ) THEN
	1052	!
[1031]	1053	!-- Open an existing netCDF file for output
[1783]	1054	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1055	!
	1056	!-- Read header information and set all ids. If there is a mismatch
	1057	!-- between the previuos and the actual run, netcdf_extend is returned
	1058	!-- as .FALSE.
[1783]	1059	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1060
	1061	!
	1062	!-- Remove the local file, if it can not be extended
	1063	IF ( .NOT. netcdf_extend ) THEN
	1064	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1065	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1066	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1067	ENDIF
	1068
	1069	ENDIF
	1070
	1071	IF ( .NOT. netcdf_extend ) THEN
	1072	!
[1031]	1073	!-- Create a new netCDF output file with requested netCDF format
[1783]	1074	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1075	!
	1076	!-- Define the header
[1783]	1077	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1078
	1079	ENDIF
[410]	1080
[1468]	1081	!
[1957]	1082	!-- nc-file for virtual flight measurements
	1083	CASE ( 199 )
	1084	!
	1085	!-- Set filename
	1086	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1087
[1957]	1088	!
	1089	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1090	!-- be opened for extension, if its variables match the actual run.
	1091	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1092
[1957]	1093	IF ( netcdf_extend ) THEN
	1094	!
	1095	!-- Open an existing netCDF file for output
	1096	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1097	!
	1098	!-- Read header information and set all ids. If there is a mismatch
	1099	!-- between the previuos and the actual run, netcdf_extend is returned
	1100	!-- as .FALSE.
	1101	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1102
	1103	!
	1104	!-- Remove the local file, if it can not be extended
	1105	IF ( .NOT. netcdf_extend ) THEN
	1106	nc_stat = NF90_CLOSE( id_set_fl )
	1107	CALL netcdf_handle_error( 'check_open', 533 )
	1108	CALL local_system( 'rm ' // TRIM( filename ) )
	1109	ENDIF
	1110
	1111	ENDIF
	1112
	1113	IF ( .NOT. netcdf_extend ) THEN
	1114	!
	1115	!-- Create a new netCDF output file with requested netCDF format
	1116	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1117	!
	1118	!-- Define the header
	1119	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1120
	1121	ENDIF
	1122
	1123
[564]	1124	CASE ( 201:200+2*max_masks )
[410]	1125	!
	1126	!-- Set filename depending on unit number
[564]	1127	IF ( file_id <= 200+max_masks ) THEN
	1128	mid = file_id - 200
[2669]	1129	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1130	filename = 'DATA_MASK_NETCDF' // TRIM( coupling_char ) // &
	1131	mask_char
[410]	1132	av = 0
	1133	ELSE
[564]	1134	mid = file_id - (200+max_masks)
[2669]	1135	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1136	filename = 'DATA_MASK_AV_NETCDF' // TRIM( coupling_char ) // &
	1137	mask_char
[410]	1138	av = 1
	1139	ENDIF
	1140	!
[1031]	1141	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1142	!-- be opened for extension, if its dimensions and variables match the
	1143	!-- actual run.
	1144	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1145
	1146	IF ( netcdf_extend ) THEN
	1147	!
[1031]	1148	!-- Open an existing netCDF file for output
[1783]	1149	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1150	.TRUE., 456 )
[410]	1151	!
	1152	!-- Read header information and set all ids. If there is a mismatch
	1153	!-- between the previuos and the actual run, netcdf_extend is returned
	1154	!-- as .FALSE.
[1783]	1155	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1156
[410]	1157	!
	1158	!-- Remove the local file, if it can not be extended
	1159	IF ( .NOT. netcdf_extend ) THEN
	1160	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1161	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1162	CALL local_system('rm ' // TRIM( filename ) )
	1163	ENDIF
[1]	1164
[410]	1165	ENDIF
	1166
	1167	IF ( .NOT. netcdf_extend ) THEN
[1]	1168	!
[1031]	1169	!-- Create a new netCDF output file with requested netCDF format
[1783]	1170	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1171	!
[410]	1172	!-- Define the header
[1783]	1173	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1174
	1175	ENDIF
	1176
	1177
	1178	#else
	1179
[564]	1180	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1181
	1182	!
[1]	1183	!-- Nothing is done in case of missing netcdf support
	1184	RETURN
	1185
	1186	#endif
	1187
	1188	CASE DEFAULT
	1189
[247]	1190	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1191	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1192
	1193	END SELECT
	1194
	1195	!
	1196	!-- Set open flag
	1197	openfile(file_id)%opened = .TRUE.
	1198
	1199	!
	1200	!-- Formats
[1320]	1201	3300 FORMAT ('#'/ &
	1202	'coord 1 file=',A,' filetype=unformatted'/ &
	1203	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1204	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
[1]	1205	'#')
	1206	4000 FORMAT ('# ',A)
[1320]	1207	5000 FORMAT ('# ',A/ &
	1208	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1209	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1210	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
[1]	1211	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
[1320]	1212	8000 FORMAT (A/ &
[1359]	1213	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1214	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1215	109('-'))
[1]	1216
	1217	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |