Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 2955

Last change on this file since 2955 was 2906, checked in by Giersch, 7 years ago
new procedure for reading/writing svf data, initialization of local variable ids
Property svn:keywords set to `Id`
File size: 43.2 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[2696]	14	! You should have received a copy of the GNU General Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2718]	17	! Copyright 1997-2018 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[2516]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 2906 2018-03-19 08:56:40Z suehring $
[2906]	27	! CASE 88 and 89 has been added for the input/output of sky view factors
	28	!
	29	! 2718 2018-01-02 08:49:38Z maronga
[2716]	30	! Corrected "Former revisions" section
	31	!
	32	! 2696 2017-12-14 17:12:51Z kanani
	33	! Change in file header (GPL part)
	34	!
	35	! 2669 2017-12-06 16:03:27Z raasch
[2669]	36	! file name extension for masked data files is changed to "_M##" and is now
	37	! appended at the end of the filename,
	38	! file ids not used any more have been removed
	39	!
	40	! 2516 2017-10-04 11:03:04Z suehring
[2516]	41	! Remove tabs
	42	!
	43	! 2514 2017-10-04 09:52:37Z suehring
[2512]	44	! upper bounds of cross section and 3d output changed from nx+1,ny+1 to nx,ny
	45	! no output of ghost layer data
	46	! iso2d-related parts removed
	47	!
	48	! 2300 2017-06-29 13:31:14Z raasch
[2300]	49	! -host
	50	!
	51	! 2298 2017-06-29 09:28:18Z raasch
[2298]	52	! -return_addres, return_username, avs_coor_file_..., avs_data_file_...,
	53	! cross_ts_numbers, cross_ts_number_count
[1321]	54	!
[2298]	55	! 2101 2017-01-05 16:42:31Z suehring
	56	!
[2064]	57	! 2063 2016-11-10 17:14:35Z raasch
	58	! bugfix: opening of PROGRESS file moved out of the NetCDF block
	59	!
[2041]	60	! 2040 2016-10-26 16:58:09Z gronemeier
[2040]	61	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
	62	!
[2001]	63	! 2000 2016-08-20 18:09:15Z knoop
	64	! Forced header and separation lines into 80 columns
	65	!
[1989]	66	! 1988 2016-08-10 14:49:06Z gronemeier
	67	! informative message added if files cannot be opened in newly created directory
	68	!
[1987]	69	! 1986 2016-08-10 14:07:17Z gronemeier
	70	! Bugfix: check if output can be opened in newly created directory. If not
	71	! wait one second and try again.
	72	!
[1975]	73	! 1974 2016-07-26 08:43:25Z gronemeier
	74	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	75	! in case of parallel I/O
	76	!
[1958]	77	! 1957 2016-07-07 10:43:48Z suehring
	78	! flight module added
	79	!
[1805]	80	! 1804 2016-04-05 16:30:18Z maronga
	81	! Removed code for parameter file check (__check)
	82	!
[1784]	83	! 1783 2016-03-06 18:36:17Z raasch
	84	! name change of netcdf routines and module + related changes
	85	!
[1780]	86	! 1779 2016-03-03 08:01:28Z raasch
	87	! coupling_char is trimmed at every place it occurs, because it can have
	88	! different length now
	89	!
[1746]	90	! 1745 2016-02-05 13:06:51Z gronemeier
	91	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	92	!
[1683]	93	! 1682 2015-10-07 23:56:08Z knoop
	94	! Code annotations made doxygen readable
	95	!
[1552]	96	! 1551 2015-03-03 14:18:16Z maronga
	97	! Removed redundant output for combine_plot_fields
	98	!
[1469]	99	! 1468 2014-09-24 14:06:57Z maronga
	100	! Adapted for use on up to 6-digit processor cores
	101	! Added file unit 117 (PROGRESS)
	102	!
[1360]	103	! 1359 2014-04-11 17:15:14Z hoffmann
	104	! Format of particle exchange statistics extended to reasonable numbers of
	105	! particles.
	106	!
[1354]	107	! 1353 2014-04-08 15:21:23Z heinze
	108	! REAL constants provided with KIND-attribute,
	109	! declaration for unused variables xkoor, ykoor, zkoor removed
	110	!
[1329]	111	! 1327 2014-03-21 11:00:16Z raasch
	112	! parts concerning iso2d and avs output removed
	113	!
[1321]	114	! 1320 2014-03-20 08:40:49Z raasch
[1320]	115	! ONLY-attribute added to USE-statements,
	116	! kind-parameters added to all INTEGER and REAL declaration statements,
	117	! kinds are defined in new module kinds,
	118	! old module precision_kind is removed,
	119	! revision history before 2012 removed,
	120	! comment fields (!:) to be used for variable explanations added to
	121	! all variable declaration statements
[1]	122	!
[1107]	123	! 1106 2013-03-04 05:31:38Z raasch
	124	! array_kind renamed precision_kind
	125	!
[1093]	126	! 1092 2013-02-02 11:24:22Z raasch
	127	! unused variables removed
	128	!
[1037]	129	! 1036 2012-10-22 13:43:42Z raasch
	130	! code put under GPL (PALM 3.9)
	131	!
[1035]	132	! 1031 2012-10-19 14:35:30Z raasch
	133	! netCDF4 without parallel file support implemented,
	134	! opening of netCDF files are done by new routines create_netcdf_file and
	135	! open_write_netcdf_file
	136	!
[965]	137	! 964 2012-07-26 09:14:24Z raasch
	138	! old profil-units (40:49) removed,
	139	! append feature removed from unit 14
	140	!
[850]	141	! 849 2012-03-15 10:35:09Z raasch
	142	! comment changed
	143	!
[810]	144	! 809 2012-01-30 13:32:58Z maronga
	145	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	146	!
[808]	147	! 807 2012-01-25 11:53:51Z maronga
	148	! New cpp directive "__check" implemented which is used by check_namelist_files
	149	!
[1]	150	! Revision 1.1 1997/08/11 06:10:55 raasch
	151	! Initial revision
	152	!
	153	!
	154	! Description:
	155	! ------------
[1682]	156	!> Check if file unit is open. If not, open file and, if necessary, write a
	157	!> header or start other initializing actions, respectively.
[1]	158	!------------------------------------------------------------------------------!
[1682]	159	SUBROUTINE check_open( file_id )
	160
[1]	161
[1320]	162	USE arrays_3d, &
	163	ONLY: zu
	164
	165	USE control_parameters, &
[2300]	166	ONLY: coupling_char, data_output_2d_on_each_pe, max_masks, &
[2298]	167	message_string, mid, nz_do3d, openfile, run_description_header, &
	168	runnr
[1320]	169
	170	USE grid_variables, &
	171	ONLY: dx, dy
	172
	173	USE indices, &
[1551]	174	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
[1320]	175
	176	USE kinds
	177
[1783]	178	#if defined( __netcdf )
	179	USE NETCDF
	180	#endif
[1320]	181
[1783]	182	USE netcdf_interface, &
[1957]	183	ONLY: id_set_fl, id_set_mask, id_set_pr, id_set_prt, id_set_pts, &
	184	id_set_sp, id_set_ts, id_set_xy, id_set_xz, id_set_yz, &
	185	id_set_3d, nc_stat, netcdf_create_file, netcdf_data_format, &
	186	netcdf_define_header, netcdf_handle_error, netcdf_open_write_file
[1783]	187
[1320]	188	USE particle_attributes, &
	189	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	190	particle_groups
	191
[1]	192	USE pegrid
	193
[1986]	194	USE posix_calls_from_fortran, &
	195	ONLY: fortran_sleep
	196
[1320]	197
[1]	198	IMPLICIT NONE
	199
[2669]	200	CHARACTER (LEN=4) :: mask_char !<
[1682]	201	CHARACTER (LEN=2) :: suffix !<
	202	CHARACTER (LEN=30) :: filename !<
	203	CHARACTER (LEN=80) :: rtext !<
	204	CHARACTER (LEN=100) :: line !<
[1]	205
[1682]	206	INTEGER(iwp) :: av !<
	207	INTEGER(iwp) :: file_id !<
	208	INTEGER(iwp) :: i !<
[1986]	209	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[1682]	210	INTEGER(iwp) :: j !<
	211	INTEGER(iwp) :: k !<
[1320]	212
[2512]	213	LOGICAL :: netcdf_extend !<
[1]	214
	215	!
	216	!-- Immediate return if file already open
	217	IF ( openfile(file_id)%opened ) RETURN
	218
	219	!
	220	!-- Only certain files are allowed to be re-opened
	221	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	222	!-- has not been checked so far, if it works!
	223	IF ( openfile(file_id)%opened_before ) THEN
	224	SELECT CASE ( file_id )
[2669]	225	CASE ( 13, 14, 21, 22, 23, 80, 85, 117 )
[1]	226	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	227	message_string = 're-open of unit ' // &
[274]	228	'14 is not verified. Please check results!'
[247]	229	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	230	ENDIF
[143]	231
[1]	232	CASE DEFAULT
[1320]	233	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	234	' is not allowed'
[247]	235	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	236
[1]	237	RETURN
[143]	238
[1]	239	END SELECT
	240	ENDIF
	241
	242	!
	243	!-- Check if file may be opened on the relevant PE
	244	SELECT CASE ( file_id )
	245
[2669]	246	CASE ( 15, 16, 17, 18, 19, 50:59, 104:105, 107, 109, 117 )
[2514]	247
[493]	248	IF ( myid /= 0 ) THEN
[1320]	249	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	250	' not allowed for PE ',myid
	251	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	252	ENDIF
	253
[564]	254	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	255
[1031]	256	IF ( netcdf_data_format < 5 ) THEN
[247]	257
[410]	258	IF ( myid /= 0 ) THEN
[1320]	259	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	260	' not allowed for PE ',myid
	261	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	262	ENDIF
[2514]	263
[493]	264	ENDIF
[1]	265
	266	CASE ( 21, 22, 23 )
	267
	268	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	269	IF ( myid /= 0 ) THEN
[1320]	270	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	271	' not allowed for PE ',myid
[277]	272	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	273	END IF
[1]	274	ENDIF
	275
[2669]	276	CASE ( 90:99 )
[1]	277
	278	!
	279	!-- File-ids that are used temporarily in other routines
[1320]	280	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	281	' is not allowed since it is used otherwise'
[247]	282	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	283
[1]	284	END SELECT
	285
	286	!
	287	!-- Open relevant files
	288	SELECT CASE ( file_id )
	289
	290	CASE ( 11 )
	291
[1779]	292	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
[102]	293	STATUS='OLD' )
[1]	294
	295	CASE ( 13 )
	296
	297	IF ( myid_char == '' ) THEN
[1779]	298	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	299	FORM='UNFORMATTED', STATUS='OLD' )
[1]	300	ELSE
[143]	301	!
[1468]	302	!-- First opening of unit 13 openes file _000000 on all PEs because
	303	!-- only this file contains the global variables
[143]	304	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	305	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	306	FORM='UNFORMATTED', STATUS='OLD' )
	307	ELSE
[1779]	308	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	309	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	310	ENDIF
[1]	311	ENDIF
	312
	313	CASE ( 14 )
	314
	315	IF ( myid_char == '' ) THEN
[1779]	316	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	317	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	318	ELSE
	319	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	320	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	321	ENDIF
[1804]	322	#if defined( __parallel )
[1]	323	!
	324	!-- Set a barrier in order to allow that all other processors in the
	325	!-- directory created by PE0 can open their file
	326	CALL MPI_BARRIER( comm2d, ierr )
	327	#endif
[1986]	328	ioerr = 1
	329	DO WHILE ( ioerr /= 0 )
	330	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	331	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	332	IF ( ioerr /= 0 ) THEN
	333	WRITE( 9, * ) '*** could not open "BINOUT'// &
	334	TRIM(coupling_char)//'/'//myid_char// &
	335	'"! Trying again in 1 sec.'
	336	CALL fortran_sleep( 1 )
	337	ENDIF
[1986]	338	ENDDO
	339
[1]	340	ENDIF
	341
	342	CASE ( 15 )
	343
[1779]	344	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	345	FORM='FORMATTED' )
[1]	346
	347	CASE ( 16 )
	348
[1779]	349	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	350	FORM='FORMATTED' )
[1]	351
	352	CASE ( 17 )
	353
[1779]	354	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	355	FORM='FORMATTED' )
[1]	356
	357	CASE ( 18 )
	358
[1779]	359	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	360	FORM='FORMATTED' )
[1]	361
	362	CASE ( 19 )
	363
[1779]	364	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	365
	366	CASE ( 20 )
	367
	368	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	369	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	370	ENDIF
	371	IF ( myid_char == '' ) THEN
[1779]	372	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	373	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	374	ELSE
[1804]	375	#if defined( __parallel )
[1]	376	!
	377	!-- Set a barrier in order to allow that all other processors in the
	378	!-- directory created by PE0 can open their file
	379	CALL MPI_BARRIER( comm2d, ierr )
	380	#endif
[1986]	381	ioerr = 1
	382	DO WHILE ( ioerr /= 0 )
	383	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	384	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	385	IOSTAT=ioerr )
[1988]	386	IF ( ioerr /= 0 ) THEN
	387	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	388	TRIM( coupling_char )//'/'//myid_char// &
	389	'"! Trying again in 1 sec.'
	390	CALL fortran_sleep( 1 )
	391	ENDIF
[1986]	392	ENDDO
	393
[1]	394	ENDIF
	395
	396	CASE ( 21 )
	397
	398	IF ( data_output_2d_on_each_pe ) THEN
[1320]	399	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	400	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	401	ELSE
[1779]	402	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	403	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	404	ENDIF
	405
	406	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	407	!
[2512]	408	!-- Write index bounds of total domain for combine_plot_fields
[1]	409	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	410	WRITE (21) 0, nx, 0, ny
[1]	411	ENDIF
	412
	413	ENDIF
	414
	415	CASE ( 22 )
	416
	417	IF ( data_output_2d_on_each_pe ) THEN
[1320]	418	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	419	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	420	ELSE
[1779]	421	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	422	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	423	ENDIF
	424
	425	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	426	!
[2512]	427	!-- Write index bounds of total domain for combine_plot_fields
[1]	428	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	429	WRITE (22) 0, nx, 0, nz+1 ! output part
[1]	430	ENDIF
	431
	432	ENDIF
	433
	434	CASE ( 23 )
	435
	436	IF ( data_output_2d_on_each_pe ) THEN
[1320]	437	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	438	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	439	ELSE
[1779]	440	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	441	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	442	ENDIF
	443
	444	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	445	!
[2512]	446	!-- Write index bounds of total domain for combine_plot_fields
[1]	447	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[2512]	448	WRITE (23) 0, ny, 0, nz+1 ! output part
[1]	449	ENDIF
	450
	451	ENDIF
	452
	453	CASE ( 30 )
	454
[1320]	455	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	456	FORM='UNFORMATTED' )
[1]	457	!
[2512]	458	!-- Specifications for combine_plot_fields
[1]	459	IF ( myid == 0 ) THEN
	460	#if defined( __parallel )
[2512]	461	WRITE ( 30 ) 0, nx, 0, ny, 0, nz_do3d
[1]	462	#endif
	463	ENDIF
	464
	465	CASE ( 80 )
	466
	467	IF ( myid_char == '' ) THEN
[105]	468	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	469	FORM='FORMATTED', POSITION='APPEND' )
[1]	470	ELSE
	471	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	472	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	473	TRIM( coupling_char ) )
[1]	474	ENDIF
[1804]	475	#if defined( __parallel )
[1]	476	!
	477	!-- Set a barrier in order to allow that thereafter all other
	478	!-- processors in the directory created by PE0 can open their file.
	479	!-- WARNING: The following barrier will lead to hanging jobs, if
	480	!-- check_open is first called from routine
	481	!-- allocate_prt_memory!
	482	IF ( .NOT. openfile(80)%opened_before ) THEN
	483	CALL MPI_BARRIER( comm2d, ierr )
	484	ENDIF
	485	#endif
[1320]	486	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	487	myid_char, &
[102]	488	FORM='FORMATTED', POSITION='APPEND' )
[1]	489	ENDIF
	490
	491	IF ( .NOT. openfile(80)%opened_before ) THEN
	492	WRITE ( 80, 8000 ) TRIM( run_description_header )
	493	ENDIF
	494
	495	CASE ( 85 )
	496
	497	IF ( myid_char == '' ) THEN
[1320]	498	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	499	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	500	ELSE
	501	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	502	CALL local_system( 'mkdir PARTICLE_DATA' // &
	503	TRIM( coupling_char ) )
[1]	504	ENDIF
[1804]	505	#if defined( __parallel )
[1]	506	!
	507	!-- Set a barrier in order to allow that thereafter all other
	508	!-- processors in the directory created by PE0 can open their file
	509	CALL MPI_BARRIER( comm2d, ierr )
	510	#endif
[1986]	511	ioerr = 1
	512	DO WHILE ( ioerr /= 0 )
	513	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	514	myid_char, &
	515	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	516	IF ( ioerr /= 0 ) THEN
[2906]	517	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	518	TRIM( coupling_char )//'/'//myid_char// &
[1988]	519	'"! Trying again in 1 sec.'
	520	CALL fortran_sleep( 1 )
	521	ENDIF
[1986]	522	ENDDO
	523
[1]	524	ENDIF
	525
	526	IF ( .NOT. openfile(85)%opened_before ) THEN
	527	WRITE ( 85 ) run_description_header
	528	!
	529	!-- Attention: change version number whenever the output format on
[849]	530	!-- unit 85 is changed (see also in routine
	531	!-- lpm_data_output_particles)
[1359]	532	rtext = 'data format version 3.1'
[1]	533	WRITE ( 85 ) rtext
[1320]	534	WRITE ( 85 ) number_of_particle_groups, &
[1]	535	max_number_of_particle_groups
	536	WRITE ( 85 ) particle_groups
[1359]	537	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	538	ENDIF
	539
[2063]	540	!
[2906]	541	!-- File where sky-view factors and further required data is stored will be
	542	!-- read
	543	CASE ( 88 )
	544
	545	IF (numprocs_previous_run /= numprocs) THEN
	546	WRITE( message_string, * ) 'A different number of processors', &
	547	' between the run that has written', &
	548	' the svf data and the one that will ',&
	549	' read it is not allowed'
	550	CALL message( 'check_open', 'PA0484', 1, 2, 0, 6, 0 )
	551	ENDIF
	552
	553	IF ( myid_char == '' ) THEN
	554	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//myid_char, &
	555	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	556	ELSE
	557
	558	OPEN ( 88, FILE='SVFIN'//TRIM( coupling_char )//'/'//myid_char, &
	559	FORM='UNFORMATTED', STATUS='OLD', IOSTAT=ioerr )
	560	ENDIF
	561
	562	!
	563	!-- File where sky-view factors and further required data is stored will be
	564	!-- created
	565	CASE ( 89 )
	566
	567	IF ( myid_char == '' ) THEN
	568	OPEN ( 89, FILE='SVFOUT'//TRIM( coupling_char )//myid_char, &
	569	FORM='UNFORMATTED', STATUS='NEW' )
	570	ELSE
	571	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	572	CALL local_system( 'mkdir SVFOUT' // TRIM( coupling_char ) )
	573	ENDIF
	574	#if defined( __parallel )
	575	!
	576	!-- Set a barrier in order to allow that all other processors in the
	577	!-- directory created by PE0 can open their file
	578	CALL MPI_BARRIER( comm2d, ierr )
	579	#endif
	580	ioerr = 1
	581	DO WHILE ( ioerr /= 0 )
	582	OPEN ( 89, FILE='SVFOUT'//TRIM(coupling_char)//'/'//myid_char, &
	583	FORM='UNFORMATTED', STATUS='NEW', IOSTAT=ioerr )
	584	IF ( ioerr /= 0 ) THEN
	585	WRITE( 9, * ) '*** could not open "BINOUT'// &
	586	TRIM(coupling_char)//'/'//myid_char// &
	587	'"! Trying again in 1 sec.'
	588	CALL fortran_sleep( 1 )
	589	ENDIF
	590	ENDDO
	591
	592	ENDIF
	593
	594	!
[2063]	595	!-- Progress file that is used by the PALM watchdog
	596	CASE ( 117 )
	597
	598	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	599	STATUS='REPLACE', FORM='FORMATTED' )
	600
[1]	601	#if defined( __netcdf )
	602	CASE ( 101, 111 )
	603	!
	604	!-- Set filename depending on unit number
	605	IF ( file_id == 101 ) THEN
[1779]	606	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	607	av = 0
	608	ELSE
[1779]	609	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	610	av = 1
	611	ENDIF
	612	!
[1031]	613	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	614	!-- be opened for extension, if its dimensions and variables match the
	615	!-- actual run.
	616	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	617	IF ( netcdf_extend ) THEN
	618	!
[1031]	619	!-- Open an existing netCDF file for output
[1783]	620	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	621	!
	622	!-- Read header information and set all ids. If there is a mismatch
	623	!-- between the previuos and the actual run, netcdf_extend is returned
	624	!-- as .FALSE.
[1783]	625	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	626
	627	!
	628	!-- Remove the local file, if it can not be extended
	629	IF ( .NOT. netcdf_extend ) THEN
	630	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	631	CALL netcdf_handle_error( 'check_open', 21 )
[493]	632	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	633	#if defined( __parallel )
[1745]	634	!
	635	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	636	!-- before any other processor tries to open a new file.
	637	!-- Barrier is only needed in case of parallel I/O
	638	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	639	#endif
[1]	640	ENDIF
	641
[1745]	642	ENDIF
[1]	643
	644	IF ( .NOT. netcdf_extend ) THEN
	645	!
[1031]	646	!-- Create a new netCDF output file with requested netCDF format
[1783]	647	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	648
	649	!
[1]	650	!-- Define the header
[1783]	651	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	652
[493]	653	!
[1031]	654	!-- In case of parallel netCDF output, create flag file which tells
[493]	655	!-- combine_plot_fields that nothing is to do.
[1031]	656	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	657	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	658	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	659	CLOSE( 99 )
	660	ENDIF
	661
[1]	662	ENDIF
	663
	664	CASE ( 102, 112 )
	665	!
	666	!-- Set filename depending on unit number
	667	IF ( file_id == 102 ) THEN
[1779]	668	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	669	av = 0
	670	ELSE
[1779]	671	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	672	av = 1
	673	ENDIF
	674	!
[1031]	675	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	676	!-- be opened for extension, if its dimensions and variables match the
	677	!-- actual run.
	678	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	679
	680	IF ( netcdf_extend ) THEN
	681	!
[1031]	682	!-- Open an existing netCDF file for output
[1783]	683	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	684	!
	685	!-- Read header information and set all ids. If there is a mismatch
	686	!-- between the previuos and the actual run, netcdf_extend is returned
	687	!-- as .FALSE.
[1783]	688	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	689
	690	!
	691	!-- Remove the local file, if it can not be extended
	692	IF ( .NOT. netcdf_extend ) THEN
	693	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	694	CALL netcdf_handle_error( 'check_open', 24 )
[493]	695	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	696	#if defined( __parallel )
[1745]	697	!
	698	!-- Set a barrier in order to assure that PE0 deleted the old file
	699	!-- before any other processor tries to open a new file
[1974]	700	!-- Barrier is only needed in case of parallel I/O
	701	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	702	#endif
[1]	703	ENDIF
	704
[1745]	705	ENDIF
[1]	706
	707	IF ( .NOT. netcdf_extend ) THEN
	708	!
[1031]	709	!-- Create a new netCDF output file with requested netCDF format
[1783]	710	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	711
	712	!
[1]	713	!-- Define the header
[1783]	714	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	715
[493]	716	!
[1031]	717	!-- In case of parallel netCDF output, create flag file which tells
[493]	718	!-- combine_plot_fields that nothing is to do.
[1031]	719	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	720	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	721	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	722	CLOSE( 99 )
	723	ENDIF
	724
[1]	725	ENDIF
	726
	727	CASE ( 103, 113 )
	728	!
	729	!-- Set filename depending on unit number
	730	IF ( file_id == 103 ) THEN
[1779]	731	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	732	av = 0
	733	ELSE
[1779]	734	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	735	av = 1
	736	ENDIF
	737	!
[1031]	738	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	739	!-- be opened for extension, if its dimensions and variables match the
	740	!-- actual run.
	741	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	742
	743	IF ( netcdf_extend ) THEN
	744	!
[1031]	745	!-- Open an existing netCDF file for output
[1783]	746	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	747	!
	748	!-- Read header information and set all ids. If there is a mismatch
	749	!-- between the previuos and the actual run, netcdf_extend is returned
	750	!-- as .FALSE.
[1783]	751	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	752
	753	!
	754	!-- Remove the local file, if it can not be extended
	755	IF ( .NOT. netcdf_extend ) THEN
	756	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	757	CALL netcdf_handle_error( 'check_open', 27 )
[493]	758	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	759	#if defined( __parallel )
[1745]	760	!
	761	!-- Set a barrier in order to assure that PE0 deleted the old file
	762	!-- before any other processor tries to open a new file
[1974]	763	!-- Barrier is only needed in case of parallel I/O
	764	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	765	#endif
[1]	766	ENDIF
	767
[1745]	768	ENDIF
[1]	769
	770	IF ( .NOT. netcdf_extend ) THEN
	771	!
[1031]	772	!-- Create a new netCDF output file with requested netCDF format
[1783]	773	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	774
	775	!
[1]	776	!-- Define the header
[1783]	777	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	778
[493]	779	!
[1031]	780	!-- In case of parallel netCDF output, create flag file which tells
[493]	781	!-- combine_plot_fields that nothing is to do.
[1031]	782	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	783	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	784	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	785	CLOSE( 99 )
	786	ENDIF
	787
[1]	788	ENDIF
	789
	790	CASE ( 104 )
	791	!
[102]	792	!-- Set filename
[1779]	793	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	794
	795	!
[1031]	796	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	797	!-- be opened for extension, if its variables match the actual run.
[102]	798	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	799
	800	IF ( netcdf_extend ) THEN
	801	!
[1031]	802	!-- Open an existing netCDF file for output
[1783]	803	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	804	!
	805	!-- Read header information and set all ids. If there is a mismatch
	806	!-- between the previuos and the actual run, netcdf_extend is returned
	807	!-- as .FALSE.
[1783]	808	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	809
	810	!
	811	!-- Remove the local file, if it can not be extended
	812	IF ( .NOT. netcdf_extend ) THEN
	813	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	814	CALL netcdf_handle_error( 'check_open', 30 )
[102]	815	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	816	ENDIF
	817
	818	ENDIF
	819
	820	IF ( .NOT. netcdf_extend ) THEN
	821	!
[1031]	822	!-- Create a new netCDF output file with requested netCDF format
[1783]	823	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	824	!
	825	!-- Define the header
[1783]	826	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	827
	828	ENDIF
	829
	830	CASE ( 105 )
	831	!
[102]	832	!-- Set filename
[1779]	833	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	834
	835	!
[1031]	836	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	837	!-- be opened for extension, if its variables match the actual run.
[102]	838	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	839
	840	IF ( netcdf_extend ) THEN
	841	!
[1031]	842	!-- Open an existing netCDF file for output
[1783]	843	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	844	!
	845	!-- Read header information and set all ids. If there is a mismatch
	846	!-- between the previuos and the actual run, netcdf_extend is returned
	847	!-- as .FALSE.
[1783]	848	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	849
	850	!
	851	!-- Remove the local file, if it can not be extended
	852	IF ( .NOT. netcdf_extend ) THEN
	853	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	854	CALL netcdf_handle_error( 'check_open', 33 )
[102]	855	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	856	ENDIF
	857
	858	ENDIF
	859
	860	IF ( .NOT. netcdf_extend ) THEN
	861	!
[1031]	862	!-- Create a new netCDF output file with requested netCDF format
[1783]	863	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	864	!
	865	!-- Define the header
[1783]	866	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	867
	868	ENDIF
	869
	870
	871	CASE ( 106, 116 )
	872	!
	873	!-- Set filename depending on unit number
	874	IF ( file_id == 106 ) THEN
[1779]	875	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	876	av = 0
	877	ELSE
[1779]	878	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	879	av = 1
	880	ENDIF
	881	!
[1031]	882	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	883	!-- be opened for extension, if its dimensions and variables match the
	884	!-- actual run.
	885	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	886
	887	IF ( netcdf_extend ) THEN
	888	!
[1031]	889	!-- Open an existing netCDF file for output
[1783]	890	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	891	!
	892	!-- Read header information and set all ids. If there is a mismatch
	893	!-- between the previuos and the actual run, netcdf_extend is returned
	894	!-- as .FALSE.
[1783]	895	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	896
	897	!
	898	!-- Remove the local file, if it can not be extended
	899	IF ( .NOT. netcdf_extend ) THEN
	900	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	901	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	902	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	903	#if defined( __parallel )
[1745]	904	!
	905	!-- Set a barrier in order to assure that PE0 deleted the old file
	906	!-- before any other processor tries to open a new file
[1974]	907	!-- Barrier is only needed in case of parallel I/O
	908	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	909	#endif
[1]	910	ENDIF
	911
[1745]	912	ENDIF
[1]	913
	914	IF ( .NOT. netcdf_extend ) THEN
	915	!
[1031]	916	!-- Create a new netCDF output file with requested netCDF format
[1783]	917	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	918
	919	!
[1]	920	!-- Define the header
[1783]	921	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	922
[493]	923	!
[1031]	924	!-- In case of parallel netCDF output, create flag file which tells
[493]	925	!-- combine_plot_fields that nothing is to do.
[1031]	926	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	927	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	928	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	929	CLOSE( 99 )
	930	ENDIF
	931
[1]	932	ENDIF
	933
	934
	935	CASE ( 107 )
	936	!
[102]	937	!-- Set filename
[1779]	938	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	939
	940	!
[1031]	941	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	942	!-- be opened for extension, if its variables match the actual run.
[102]	943	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	944
	945	IF ( netcdf_extend ) THEN
	946	!
[1031]	947	!-- Open an existing netCDF file for output
[1783]	948	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	949
[1]	950	!
	951	!-- Read header information and set all ids. If there is a mismatch
	952	!-- between the previuos and the actual run, netcdf_extend is returned
	953	!-- as .FALSE.
[1783]	954	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	955
	956	!
	957	!-- Remove the local file, if it can not be extended
	958	IF ( .NOT. netcdf_extend ) THEN
	959	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	960	CALL netcdf_handle_error( 'check_open', 39 )
[102]	961	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	962	ENDIF
	963
	964	ENDIF
	965
	966	IF ( .NOT. netcdf_extend ) THEN
	967	!
[1031]	968	!-- Create a new netCDF output file with requested netCDF format
[1783]	969	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	970	!
	971	!-- Define the header
[1783]	972	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	973
	974	ENDIF
	975
	976
	977	CASE ( 108 )
	978
	979	IF ( myid_char == '' ) THEN
[1779]	980	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
[1]	981	ELSE
[1320]	982	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
[105]	983	myid_char
[1]	984	ENDIF
	985	!
[1031]	986	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	987	!-- be opened for extension, if its variables match the actual run.
	988	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	989
	990	IF ( netcdf_extend ) THEN
	991	!
[1031]	992	!-- Open an existing netCDF file for output
[1783]	993	CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	994	!
	995	!-- Read header information and set all ids. If there is a mismatch
	996	!-- between the previuos and the actual run, netcdf_extend is returned
	997	!-- as .FALSE.
[1783]	998	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	999
	1000	!
	1001	!-- Remove the local file, if it can not be extended
	1002	IF ( .NOT. netcdf_extend ) THEN
	1003	nc_stat = NF90_CLOSE( id_set_prt )
[1783]	1004	CALL netcdf_handle_error( 'check_open', 42 )
[1745]	1005	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1006	ENDIF
	1007
	1008	ENDIF
	1009
	1010	IF ( .NOT. netcdf_extend ) THEN
	1011
	1012	!
	1013	!-- For runs on multiple processors create the subdirectory
	1014	IF ( myid_char /= '' ) THEN
[1320]	1015	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
[1]	1016	THEN ! needs modification in case of non-extendable sets
[1320]	1017	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1018	TRIM( coupling_char ) // '/' )
[1]	1019	ENDIF
[1804]	1020	#if defined( __parallel )
[807]	1021	!
[1]	1022	!-- Set a barrier in order to allow that all other processors in the
	1023	!-- directory created by PE0 can open their file
	1024	CALL MPI_BARRIER( comm2d, ierr )
	1025	#endif
	1026	ENDIF
	1027
	1028	!
[1031]	1029	!-- Create a new netCDF output file with requested netCDF format
[1783]	1030	CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1031
	1032	!
[1]	1033	!-- Define the header
[1783]	1034	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1035
	1036	ENDIF
	1037
	1038	CASE ( 109 )
	1039	!
[102]	1040	!-- Set filename
[1779]	1041	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1042
	1043	!
[1031]	1044	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1045	!-- be opened for extension, if its variables match the actual run.
[102]	1046	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1047
	1048	IF ( netcdf_extend ) THEN
	1049	!
[1031]	1050	!-- Open an existing netCDF file for output
[1783]	1051	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1052	!
	1053	!-- Read header information and set all ids. If there is a mismatch
	1054	!-- between the previuos and the actual run, netcdf_extend is returned
	1055	!-- as .FALSE.
[1783]	1056	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1057
	1058	!
	1059	!-- Remove the local file, if it can not be extended
	1060	IF ( .NOT. netcdf_extend ) THEN
	1061	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1062	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1063	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1064	ENDIF
	1065
	1066	ENDIF
	1067
	1068	IF ( .NOT. netcdf_extend ) THEN
	1069	!
[1031]	1070	!-- Create a new netCDF output file with requested netCDF format
[1783]	1071	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1072	!
	1073	!-- Define the header
[1783]	1074	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1075
	1076	ENDIF
[410]	1077
[1468]	1078	!
[1957]	1079	!-- nc-file for virtual flight measurements
	1080	CASE ( 199 )
	1081	!
	1082	!-- Set filename
	1083	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1084
[1957]	1085	!
	1086	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1087	!-- be opened for extension, if its variables match the actual run.
	1088	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1089
[1957]	1090	IF ( netcdf_extend ) THEN
	1091	!
	1092	!-- Open an existing netCDF file for output
	1093	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1094	!
	1095	!-- Read header information and set all ids. If there is a mismatch
	1096	!-- between the previuos and the actual run, netcdf_extend is returned
	1097	!-- as .FALSE.
	1098	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1099
	1100	!
	1101	!-- Remove the local file, if it can not be extended
	1102	IF ( .NOT. netcdf_extend ) THEN
	1103	nc_stat = NF90_CLOSE( id_set_fl )
	1104	CALL netcdf_handle_error( 'check_open', 533 )
	1105	CALL local_system( 'rm ' // TRIM( filename ) )
	1106	ENDIF
	1107
	1108	ENDIF
	1109
	1110	IF ( .NOT. netcdf_extend ) THEN
	1111	!
	1112	!-- Create a new netCDF output file with requested netCDF format
	1113	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1114	!
	1115	!-- Define the header
	1116	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1117
	1118	ENDIF
	1119
	1120
[564]	1121	CASE ( 201:200+2*max_masks )
[410]	1122	!
	1123	!-- Set filename depending on unit number
[564]	1124	IF ( file_id <= 200+max_masks ) THEN
	1125	mid = file_id - 200
[2669]	1126	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1127	filename = 'DATA_MASK_NETCDF' // TRIM( coupling_char ) // &
	1128	mask_char
[410]	1129	av = 0
	1130	ELSE
[564]	1131	mid = file_id - (200+max_masks)
[2669]	1132	WRITE ( mask_char,'(A2,I2.2)') '_M', mid
	1133	filename = 'DATA_MASK_AV_NETCDF' // TRIM( coupling_char ) // &
	1134	mask_char
[410]	1135	av = 1
	1136	ENDIF
	1137	!
[1031]	1138	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1139	!-- be opened for extension, if its dimensions and variables match the
	1140	!-- actual run.
	1141	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1142
	1143	IF ( netcdf_extend ) THEN
	1144	!
[1031]	1145	!-- Open an existing netCDF file for output
[1783]	1146	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1147	.TRUE., 456 )
[410]	1148	!
	1149	!-- Read header information and set all ids. If there is a mismatch
	1150	!-- between the previuos and the actual run, netcdf_extend is returned
	1151	!-- as .FALSE.
[1783]	1152	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1153
[410]	1154	!
	1155	!-- Remove the local file, if it can not be extended
	1156	IF ( .NOT. netcdf_extend ) THEN
	1157	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1158	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1159	CALL local_system('rm ' // TRIM( filename ) )
	1160	ENDIF
[1]	1161
[410]	1162	ENDIF
	1163
	1164	IF ( .NOT. netcdf_extend ) THEN
[1]	1165	!
[1031]	1166	!-- Create a new netCDF output file with requested netCDF format
[1783]	1167	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1168	!
[410]	1169	!-- Define the header
[1783]	1170	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1171
	1172	ENDIF
	1173
	1174
	1175	#else
	1176
[564]	1177	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1178
	1179	!
[1]	1180	!-- Nothing is done in case of missing netcdf support
	1181	RETURN
	1182
	1183	#endif
	1184
	1185	CASE DEFAULT
	1186
[247]	1187	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1188	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1189
	1190	END SELECT
	1191
	1192	!
	1193	!-- Set open flag
	1194	openfile(file_id)%opened = .TRUE.
	1195
	1196	!
	1197	!-- Formats
[1320]	1198	3300 FORMAT ('#'/ &
	1199	'coord 1 file=',A,' filetype=unformatted'/ &
	1200	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1201	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
[1]	1202	'#')
	1203	4000 FORMAT ('# ',A)
[1320]	1204	5000 FORMAT ('# ',A/ &
	1205	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1206	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1207	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
[1]	1208	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
[1320]	1209	8000 FORMAT (A/ &
[1359]	1210	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1211	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1212	109('-'))
[1]	1213
	1214	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |