Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 287

Last change on this file since 287 was 277, checked in by heinze, 16 years ago
Change of arguments in message calls whenever there are errors induced by MPI-ABORT
Property svn:keywords set to `Id`
File size: 46.2 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
	3	!------------------------------------------------------------------------------!
[247]	4	! Current revisions:
[1]	5	! -----------------
[263]	6	! Output of NetCDF messages with aid of message handling routine.
[247]	7	! Output of messages replaced by message handling routine
[1]	8	!
[247]	9	!
[1]	10	! Former revisions:
	11	! -----------------
[3]	12	! $Id: check_open.f90 277 2009-03-31 09:13:47Z raasch $
[77]	13	!
[198]	14	! 146 2008-01-17 13:08:34Z raasch
	15	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	16	! because only this file contains the global variables,
	17	! myid_char_14 removed
	18	!
[139]	19	! 120 2007-10-17 11:54:43Z raasch
	20	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
	21	!
[110]	22	! 105 2007-08-08 07:12:55Z raasch
	23	! Different filenames are used in case of a coupled simulation,
	24	! coupling_char added to all relevant filenames
	25	!
[83]	26	! 82 2007-04-16 15:40:52Z raasch
	27	! Call of local_getenv removed, preprocessor directives for old systems removed
	28	!
[77]	29	! 46 2007-03-05 06:00:47Z raasch
	30	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	31	!
[3]	32	! RCS Log replace by Id keyword, revision history cleaned up
	33	!
[1]	34	! Revision 1.44 2006/08/22 13:48:34 raasch
	35	! xz and yz cross sections now up to nzt+1
	36	!
	37	! Revision 1.1 1997/08/11 06:10:55 raasch
	38	! Initial revision
	39	!
	40	!
	41	! Description:
	42	! ------------
	43	! Check if file unit is open. If not, open file and, if necessary, write a
	44	! header or start other initializing actions, respectively.
	45	!------------------------------------------------------------------------------!
	46
	47	USE array_kind
	48	USE arrays_3d
	49	USE control_parameters
	50	USE grid_variables
	51	USE indices
	52	USE netcdf_control
	53	USE particle_attributes
	54	USE pegrid
	55	USE profil_parameter
	56	USE statistics
	57
	58	IMPLICIT NONE
	59
	60	CHARACTER (LEN=2) :: suffix
[82]	61	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	62	CHARACTER (LEN=30) :: filename
	63	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	64	avs_data_file_localname
	65	CHARACTER (LEN=80) :: rtext
	66	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	67	batch_scp, zeile
	68	CHARACTER (LEN=400) :: command
	69
	70	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
	71	j, k, legpos = 1, timodex = 1
	72	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
	73
	74	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	75	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	76	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	77
	78	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	79	sizex = 250.0, sizey = 40.0, texfac = 1.5
	80
	81	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	82	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	83
	84
	85	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
	86	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
	87	rand, rlegfak, sizex, sizey, texfac, &
	88	timodex, twoxa, twoya, xtext
	89
	90
	91	!
	92	!-- Immediate return if file already open
	93	IF ( openfile(file_id)%opened ) RETURN
	94
	95	!
	96	!-- Only certain files are allowed to be re-opened
	97	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	98	!-- has not been checked so far, if it works!
	99	IF ( openfile(file_id)%opened_before ) THEN
	100	SELECT CASE ( file_id )
[143]	101	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	102	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	103	message_string = 're-open of unit ' // &
[274]	104	'14 is not verified. Please check results!'
[247]	105	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	106	ENDIF
[143]	107
[1]	108	CASE DEFAULT
[247]	109	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	110	' is not allowed'
[247]	111	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	112
[1]	113	RETURN
[143]	114
[1]	115	END SELECT
	116	ENDIF
	117
	118	!
	119	!-- Check if file may be opened on the relevant PE
	120	SELECT CASE ( file_id )
	121
	122	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 101:107, 109, 111:113, &
	123	116 )
[247]	124
[1]	125	IF ( myid /= 0 ) THEN
[247]	126	WRITE( message_string, * ) 'opening file-id ',file_id, &
	127	' not allowed for PE ',myid
[277]	128	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[1]	129	ENDIF
	130
	131	CASE ( 21, 22, 23 )
	132
	133	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	134	IF ( myid /= 0 ) THEN
[247]	135	WRITE( message_string, * ) 'opening file-id ',file_id, &
	136	' not allowed for PE ',myid
[277]	137	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	138	END IF
[1]	139	ENDIF
	140
	141	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	142
	143	!
	144	!-- File-ids that are used temporarily in other routines
[247]	145	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	146	' is not allowed since it is used otherwise'
[247]	147	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	148
[1]	149	END SELECT
	150
	151	!
	152	!-- Open relevant files
	153	SELECT CASE ( file_id )
	154
	155	CASE ( 11 )
	156
[102]	157	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	158	STATUS='OLD' )
[1]	159
	160	CASE ( 13 )
	161
	162	IF ( myid_char == '' ) THEN
[102]	163	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	164	FORM='UNFORMATTED', STATUS='OLD' )
[1]	165	ELSE
[143]	166	!
	167	!-- First opening of unit 13 openes file _0000 on all PEs because only
	168	!-- this file contains the global variables
	169	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	170	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	171	FORM='UNFORMATTED', STATUS='OLD' )
	172	ELSE
	173	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	174	FORM='UNFORMATTED', STATUS='OLD' )
	175	ENDIF
[1]	176	ENDIF
	177
	178	CASE ( 14 )
	179
	180	IF ( myid_char == '' ) THEN
[102]	181	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	182	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	183	ELSE
	184	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	185	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	186	ENDIF
	187	#if defined( __parallel )
	188	!
	189	!-- Set a barrier in order to allow that all other processors in the
	190	!-- directory created by PE0 can open their file
	191	CALL MPI_BARRIER( comm2d, ierr )
	192	#endif
[146]	193	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[102]	194	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	195	ENDIF
	196
	197	CASE ( 15 )
	198
[102]	199	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	200
	201	CASE ( 16 )
	202
[102]	203	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	204
	205	CASE ( 17 )
	206
[102]	207	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	208
	209	CASE ( 18 )
	210
[102]	211	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	212
	213	CASE ( 19 )
	214
[102]	215	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	216
	217	CASE ( 20 )
	218
	219	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	220	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	221	ENDIF
	222	IF ( myid_char == '' ) THEN
[105]	223	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	224	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	225	ELSE
	226	#if defined( __parallel )
	227	!
	228	!-- Set a barrier in order to allow that all other processors in the
	229	!-- directory created by PE0 can open their file
	230	CALL MPI_BARRIER( comm2d, ierr )
	231	#endif
[105]	232	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	233	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	234	ENDIF
	235
	236	CASE ( 21 )
	237
	238	IF ( data_output_2d_on_each_pe ) THEN
[105]	239	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	240	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	241	ELSE
[102]	242	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	243	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	244	ENDIF
	245
	246	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	247	!
	248	!-- Output for combine_plot_fields
	249	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	250	WRITE (21) -1, nx+1, -1, ny+1 ! total array size
	251	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	252	ENDIF
	253	!
	254	!-- Determine and write ISO2D coordiante header
	255	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	256	hu = 0.0
	257	ho = (ny+1) * dy
	258	DO i = 1, ny
	259	eta(i) = REAL( i ) / ( ny + 1.0 )
	260	ENDDO
	261	eta(0) = 0.0
	262	eta(ny+1) = 1.0
	263
	264	WRITE (21) dx,eta,hu,ho
	265	DEALLOCATE( eta, ho, hu )
	266
	267	!
	268	!-- Create output file for local parameters
	269	IF ( iso2d_output ) THEN
[102]	270	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	271	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	272	openfile(27)%opened = .TRUE.
	273	ENDIF
	274
	275	ENDIF
	276
	277	CASE ( 22 )
	278
	279	IF ( data_output_2d_on_each_pe ) THEN
[105]	280	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	281	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	282	ELSE
[102]	283	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	284	POSITION='APPEND' )
	285	ENDIF
	286
	287	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	288	!
	289	!-- Output for combine_plot_fields
	290	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	291	WRITE (22) -1, nx+1, 0, nz+1 ! total array size
	292	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	293	ENDIF
	294	!
	295	!-- Determine and write ISO2D coordiante header
	296	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	297	hu = 0.0
	298	ho = zu(nz+1)
	299	DO i = 1, nz
	300	eta(i) = REAL( zu(i) ) / zu(nz+1)
	301	ENDDO
	302	eta(0) = 0.0
	303	eta(nz+1) = 1.0
	304
	305	WRITE (22) dx,eta,hu,ho
	306	DEALLOCATE( eta, ho, hu )
	307	!
	308	!-- Create output file for local parameters
[102]	309	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	310	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	311	openfile(28)%opened = .TRUE.
	312
	313	ENDIF
	314
	315	CASE ( 23 )
	316
	317	IF ( data_output_2d_on_each_pe ) THEN
[105]	318	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	319	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	320	ELSE
[102]	321	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	322	POSITION='APPEND' )
	323	ENDIF
	324
	325	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	326	!
	327	!-- Output for combine_plot_fields
	328	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	329	WRITE (23) -1, ny+1, 0, nz+1 ! total array size
	330	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	331	ENDIF
	332	!
	333	!-- Determine and write ISO2D coordiante header
	334	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	335	hu = 0.0
	336	ho = zu(nz+1)
	337	DO i = 1, nz
	338	eta(i) = REAL( zu(i) ) / zu(nz+1)
	339	ENDDO
	340	eta(0) = 0.0
	341	eta(nz+1) = 1.0
	342
	343	WRITE (23) dx,eta,hu,ho
	344	DEALLOCATE( eta, ho, hu )
	345	!
	346	!-- Create output file for local parameters
[102]	347	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	348	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	349	openfile(29)%opened = .TRUE.
	350
	351	ENDIF
	352
	353	CASE ( 30 )
	354
[105]	355	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	356	FORM='UNFORMATTED' )
[1]	357	!
	358	!-- Write coordinate file for AVS
	359	IF ( myid == 0 ) THEN
	360	#if defined( __parallel )
	361	!
	362	!-- Specifications for combine_plot_fields
	363	IF ( .NOT. do3d_compress ) THEN
	364	WRITE ( 30 ) -1,nx+1,-1,ny+1,0,nz_do3d
	365	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	366	ENDIF
	367	#endif
	368	!
	369	!-- Write coordinate file for AVS:
	370	!-- First determine file names (including cyle numbers) of AVS files on
	371	!-- target machine (to which the files are to be transferred).
	372	!-- Therefore path information has to be obtained first.
	373	IF ( avs_output ) THEN
[82]	374	iaddres = LEN_TRIM( return_addres )
	375	iusern = LEN_TRIM( return_username )
[1]	376
	377	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	378	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	379	.NOT. avs_data_file_found )
	380
	381	READ ( 3, '(A)', END=1 ) zeile
	382
	383	SELECT CASE ( zeile(1:11) )
	384
	385	CASE ( 'PLOT3D_COOR' )
	386	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	387	avs_coor_file_localname
	388	avs_coor_file_found = .TRUE.
	389
	390	CASE ( 'PLOT3D_DATA' )
	391	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	392	avs_data_file_localname
	393	avs_data_file_found = .TRUE.
	394
	395	CASE DEFAULT
	396	READ ( 3, '(A/A)' ) zeile, zeile
	397
	398	END SELECT
	399
	400	ENDDO
	401	!
	402	!-- Now the cycle numbers on the remote machine must be obtained
	403	!-- using batch_scp
	404	1 CLOSE ( 3 )
	405	IF ( .NOT. avs_coor_file_found .OR. &
	406	.NOT. avs_data_file_found ) THEN
[274]	407	message_string= 'no filename for AVS-data-file ' // &
	408	'found in MRUN-config-file' // &
[247]	409	' &filename in FLD-file set to "unknown"'
	410	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	411
	412	avs_coor_file = 'unknown'
	413	avs_data_file = 'unknown'
	414	ELSE
	415	get_filenames = .TRUE.
	416	IF ( TRIM( host ) == 'hpmuk' .OR. &
	417	TRIM( host ) == 'lcmuk' ) THEN
	418	batch_scp = '/home/raasch/pub/batch_scp'
	419	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	420	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	421	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	422	TRIM( host ) == 'ibmb' ) THEN
	423	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	424	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	425	batch_scp = '/home/nhbksira/pub/batch_scp'
	426	ELSE
[247]	427	message_string= 'no path for batch_scp on host "' // &
	428	TRIM( host ) // '"'
	429	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	430	get_filenames = .FALSE.
	431	ENDIF
	432
	433	IF ( get_filenames ) THEN
	434	!
	435	!-- Determine the coordinate file name.
	436	!-- /etc/passwd serves as Dummy-Datei, because it is not
	437	!-- really transferred.
	438	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	439	return_username(1:iusern) // ' ' // &
[1]	440	return_addres(1:iaddres) // ' /etc/passwd "' // &
	441	TRIM( avs_coor_file_catalog ) // '" ' // &
	442	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	443
	444	CALL local_system( command )
	445	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	446	READ ( 3, '(A)' ) avs_coor_file
	447	CLOSE ( 3 )
	448	!
	449	!-- Determine the data file name
	450	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	451	return_username(1:iusern) // ' ' // &
[1]	452	return_addres(1:iaddres) // ' /etc/passwd "' // &
	453	TRIM( avs_data_file_catalog ) // '" ' // &
	454	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	455
	456	CALL local_system( command )
	457	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	458	READ ( 3, '(A)' ) avs_data_file
	459	CLOSE ( 3 )
	460
	461	ELSE
	462
	463	avs_coor_file = 'unknown'
	464	avs_data_file = 'unknown'
	465
	466	ENDIF
	467
	468	ENDIF
	469
	470	!
	471	!-- Output of the coordinate file description for FLD-file
	472	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	473	openfile(33)%opened = .TRUE.
	474	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
	475	TRIM( avs_coor_file ), (nx+2)*4, &
	476	TRIM( avs_coor_file ), (nx+2)4+(ny+2)4
	477
	478
	479	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	480	DO i = 0, nx+1
	481	xkoor(i) = i * dx
	482	ENDDO
	483	DO j = 0, ny+1
	484	ykoor(j) = j * dy
	485	ENDDO
	486	DO k = 0, nz_do3d
	487	zkoor(k) = zu(k)
	488	ENDDO
	489
	490	!
	491	!-- Create and write on AVS coordinate file
	492	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	493	openfile(31)%opened = .TRUE.
	494
	495	WRITE (31) xkoor, ykoor, zkoor
	496	DEALLOCATE( xkoor, ykoor, zkoor )
	497
	498	!
	499	!-- Create FLD file (being written on in close_file)
	500	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	501	openfile(32)%opened = .TRUE.
	502
	503	!
	504	!-- Create flag file for compressed 3D output,
	505	!-- influences output commands in mrun
	506	IF ( do3d_compress ) THEN
	507	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	508	WRITE ( 3, '(1X)' )
	509	CLOSE ( 3 )
	510	ENDIF
	511
	512	ENDIF
	513
	514	ENDIF
	515
	516	!
	517	!-- In case of data compression output of the coordinates of the
	518	!-- corresponding partial array of a PE only once at the top of the file
	519	IF ( avs_output .AND. do3d_compress ) THEN
	520	WRITE ( 30 ) nxl-1, nxr+1, nys-1, nyn+1, nzb, nz_do3d
	521	ENDIF
	522
	523	CASE ( 40:49 )
	524
	525	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
	526	suffix = ''
	527	ELSE
	528	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
	529	ENDIF
[105]	530	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
	531	TRIM( suffix ), &
[102]	532	FORM='FORMATTED' )
[1]	533	!
	534	!-- Write contents comments at the top of the file
	535	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
	536	TRIM( region( file_id - 40 ) )
	537
	538	CASE ( 50:59 )
	539
	540	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	541	suffix = ''
	542	ELSE
	543	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	544	ENDIF
[105]	545	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	546	TRIM( suffix ), &
[102]	547	FORM='FORMATTED', RECL=496 )
[1]	548	!
	549	!-- Write PROFIL parameter file for output of time series
	550	!-- NOTE: To be on the safe side, this output is done at the beginning of
	551	!-- the model run (in case of collapse) and it is repeated in
	552	!-- close_file, then, however, with value ranges for the coordinate
	553	!-- systems
	554	!
	555	!-- Firstly determine the number of the coordinate systems to be drawn
	556	cranz = 0
	557	DO j = 1, 10
	558	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	559	ENDDO
	560	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	561	TRIM( region( file_id - 50 ) )
	562	!
	563	!-- Write RAHMEN parameter
[105]	564	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	565	TRIM( suffix ), &
[102]	566	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	567	WRITE ( 90, RAHMEN )
	568	!
	569	!-- Determine and write CROSS parameters for the individual coordinate
	570	!-- systems
	571	DO j = 1, 10
	572	k = cross_ts_number_count(j)
	573	IF ( k /= 0 ) THEN
	574	!
	575	!-- Store curve numbers, colours and line style
	576	klist(1:k) = cross_ts_numbers(1:k,j)
	577	klist(k+1:10) = 999999
	578	cucol(1:k) = linecolors(1:k)
	579	lstyle(1:k) = linestyles(1:k)
	580	!
	581	!-- Write CROSS parameter
	582	WRITE ( 90, CROSS )
	583
	584	ENDIF
	585	ENDDO
	586
	587	CLOSE ( 90 )
	588	!
	589	!-- Write all labels at the top of the data file, but only during the
	590	!-- first run of a sequence of jobs. The following jobs copy the time
	591	!-- series data to the bottom of that file.
	592	IF ( runnr == 0 ) THEN
	593	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	594	' ' // TRIM( region( file_id - 50 ) )
	595	ENDIF
	596
	597
	598	CASE ( 80 )
	599
	600	IF ( myid_char == '' ) THEN
[105]	601	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	602	FORM='FORMATTED', POSITION='APPEND' )
[1]	603	ELSE
	604	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	605	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	606	ENDIF
	607	#if defined( __parallel )
	608	!
	609	!-- Set a barrier in order to allow that thereafter all other
	610	!-- processors in the directory created by PE0 can open their file.
	611	!-- WARNING: The following barrier will lead to hanging jobs, if
	612	!-- check_open is first called from routine
	613	!-- allocate_prt_memory!
	614	IF ( .NOT. openfile(80)%opened_before ) THEN
	615	CALL MPI_BARRIER( comm2d, ierr )
	616	ENDIF
	617	#endif
[105]	618	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	619	myid_char, &
[102]	620	FORM='FORMATTED', POSITION='APPEND' )
[1]	621	ENDIF
	622
	623	IF ( .NOT. openfile(80)%opened_before ) THEN
	624	WRITE ( 80, 8000 ) TRIM( run_description_header )
	625	ENDIF
	626
	627	CASE ( 81 )
	628
[102]	629	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	630	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	631
	632	CASE ( 82 )
	633
[102]	634	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	635	POSITION = 'APPEND' )
	636
	637	CASE ( 83 )
	638
[102]	639	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	640	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	641
	642	CASE ( 84 )
	643
[102]	644	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	645	POSITION='APPEND' )
	646
	647	CASE ( 85 )
	648
	649	IF ( myid_char == '' ) THEN
[105]	650	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	651	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	652	ELSE
	653	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	654	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	655	ENDIF
	656	#if defined( __parallel )
	657	!
	658	!-- Set a barrier in order to allow that thereafter all other
	659	!-- processors in the directory created by PE0 can open their file
	660	CALL MPI_BARRIER( comm2d, ierr )
	661	#endif
[105]	662	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	663	myid_char, &
[102]	664	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	665	ENDIF
	666
	667	IF ( .NOT. openfile(85)%opened_before ) THEN
	668	WRITE ( 85 ) run_description_header
	669	!
	670	!-- Attention: change version number whenever the output format on
	671	!-- unit 85 is changed (see also in routine advec_particles)
	672	rtext = 'data format version 3.0'
	673	WRITE ( 85 ) rtext
	674	WRITE ( 85 ) number_of_particle_groups, &
	675	max_number_of_particle_groups
	676	WRITE ( 85 ) particle_groups
	677	ENDIF
	678
	679	#if defined( __netcdf )
	680	CASE ( 101, 111 )
	681	!
	682	!-- Set filename depending on unit number
	683	IF ( file_id == 101 ) THEN
[102]	684	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	685	av = 0
	686	ELSE
[102]	687	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	688	av = 1
	689	ENDIF
	690	!
	691	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	692	!-- be opened for extension, if its dimensions and variables match the
	693	!-- actual run.
	694	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	695
	696	IF ( netcdf_extend ) THEN
	697	!
	698	!-- Open an existing NetCDF file for output
	699	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
[263]	700
	701	CALL handle_netcdf_error( 'check_open', 20 )
[1]	702	!
	703	!-- Read header information and set all ids. If there is a mismatch
	704	!-- between the previuos and the actual run, netcdf_extend is returned
	705	!-- as .FALSE.
	706	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	707
	708	!
	709	!-- Remove the local file, if it can not be extended
	710	IF ( .NOT. netcdf_extend ) THEN
	711	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	712	CALL handle_netcdf_error( 'check_open', 21 )
[1]	713	CALL local_system( 'rm ' // TRIM( filename ) )
	714	ENDIF
	715
	716	ENDIF
	717
	718	IF ( .NOT. netcdf_extend ) THEN
	719	!
	720	!-- Create a new NetCDF output file
	721	IF ( netcdf_64bit ) THEN
	722	#if defined( __netcdf_64bit )
	723	nc_stat = NF90_CREATE( filename, &
	724	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	725	id_set_xy(av) )
	726	#else
[274]	727	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	728	'on this machine'
[247]	729	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	730
[1]	731	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	732	#endif
	733	ELSE
	734	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	735	ENDIF
[263]	736	CALL handle_netcdf_error( 'check_open', 22 )
[1]	737	!
	738	!-- Define the header
	739	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	740
	741	ENDIF
	742
	743	CASE ( 102, 112 )
	744	!
	745	!-- Set filename depending on unit number
	746	IF ( file_id == 102 ) THEN
[102]	747	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	748	av = 0
	749	ELSE
[102]	750	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	751	av = 1
	752	ENDIF
	753	!
	754	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	755	!-- be opened for extension, if its dimensions and variables match the
	756	!-- actual run.
	757	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	758
	759	IF ( netcdf_extend ) THEN
	760	!
	761	!-- Open an existing NetCDF file for output
	762	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
[263]	763	CALL handle_netcdf_error( 'check_open', 23 )
[1]	764	!
	765	!-- Read header information and set all ids. If there is a mismatch
	766	!-- between the previuos and the actual run, netcdf_extend is returned
	767	!-- as .FALSE.
	768	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	769
	770	!
	771	!-- Remove the local file, if it can not be extended
	772	IF ( .NOT. netcdf_extend ) THEN
	773	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	774	CALL handle_netcdf_error( 'check_open', 24 )
[1]	775	CALL local_system( 'rm ' // TRIM( filename ) )
	776	ENDIF
	777
	778	ENDIF
	779
	780	IF ( .NOT. netcdf_extend ) THEN
	781	!
	782	!-- Create a new NetCDF output file
	783	IF ( netcdf_64bit ) THEN
	784	#if defined( __netcdf_64bit )
	785	nc_stat = NF90_CREATE( filename, &
	786	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	787	id_set_xz(av) )
	788	#else
[274]	789	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	790	'on this machine'
[247]	791	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	792
[1]	793	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	794	#endif
	795	ELSE
	796	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	797	ENDIF
[263]	798	CALL handle_netcdf_error( 'check_open', 25 )
[1]	799	!
	800	!-- Define the header
	801	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	802
	803	ENDIF
	804
	805	CASE ( 103, 113 )
	806	!
	807	!-- Set filename depending on unit number
	808	IF ( file_id == 103 ) THEN
[102]	809	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	810	av = 0
	811	ELSE
[102]	812	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	813	av = 1
	814	ENDIF
	815	!
	816	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	817	!-- be opened for extension, if its dimensions and variables match the
	818	!-- actual run.
	819	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	820
	821	IF ( netcdf_extend ) THEN
	822	!
	823	!-- Open an existing NetCDF file for output
	824	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
[263]	825	CALL handle_netcdf_error( 'check_open', 26 )
[1]	826	!
	827	!-- Read header information and set all ids. If there is a mismatch
	828	!-- between the previuos and the actual run, netcdf_extend is returned
	829	!-- as .FALSE.
	830	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	831
	832	!
	833	!-- Remove the local file, if it can not be extended
	834	IF ( .NOT. netcdf_extend ) THEN
	835	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	836	CALL handle_netcdf_error( 'check_open', 27 )
[1]	837	CALL local_system( 'rm ' // TRIM( filename ) )
	838	ENDIF
	839
	840	ENDIF
	841
	842	IF ( .NOT. netcdf_extend ) THEN
	843	!
	844	!-- Create a new NetCDF output file
	845	IF ( netcdf_64bit ) THEN
	846	#if defined( __netcdf_64bit )
	847	nc_stat = NF90_CREATE( filename, &
	848	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET), &
	849	id_set_yz(av) )
	850	#else
[274]	851	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	852	'on this machine'
[247]	853	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	854
[1]	855	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	856	#endif
	857	ELSE
	858	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	859	ENDIF
[263]	860	CALL handle_netcdf_error( 'check_open', 28 )
[1]	861	!
	862	!-- Define the header
	863	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	864
	865	ENDIF
	866
	867	CASE ( 104 )
	868	!
[102]	869	!-- Set filename
	870	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	871
	872	!
[1]	873	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	874	!-- be opened for extension, if its variables match the actual run.
[102]	875	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	876
	877	IF ( netcdf_extend ) THEN
	878	!
	879	!-- Open an existing NetCDF file for output
[102]	880	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
[263]	881	CALL handle_netcdf_error( 'check_open', 29 )
[1]	882	!
	883	!-- Read header information and set all ids. If there is a mismatch
	884	!-- between the previuos and the actual run, netcdf_extend is returned
	885	!-- as .FALSE.
	886	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	887
	888	!
	889	!-- Remove the local file, if it can not be extended
	890	IF ( .NOT. netcdf_extend ) THEN
	891	nc_stat = NF90_CLOSE( id_set_pr )
[263]	892	CALL handle_netcdf_error( 'check_open', 30 )
[102]	893	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	894	ENDIF
	895
	896	ENDIF
	897
	898	IF ( .NOT. netcdf_extend ) THEN
	899	!
	900	!-- Create a new NetCDF output file
	901	IF ( netcdf_64bit ) THEN
	902	#if defined( __netcdf_64bit )
[102]	903	nc_stat = NF90_CREATE( filename, &
[1]	904	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	905	id_set_pr )
[247]	906	#else
[274]	907	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	908	'on this machine'
[247]	909	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	910
[102]	911	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	912	#endif
	913	ELSE
[102]	914	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	915	ENDIF
[263]	916	CALL handle_netcdf_error( 'check_open', 31 )
[1]	917	!
	918	!-- Define the header
	919	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	920
	921	ENDIF
	922
	923	CASE ( 105 )
	924	!
[102]	925	!-- Set filename
	926	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	927
	928	!
[1]	929	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	930	!-- be opened for extension, if its variables match the actual run.
[102]	931	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	932
	933	IF ( netcdf_extend ) THEN
	934	!
	935	!-- Open an existing NetCDF file for output
[102]	936	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
[263]	937	CALL handle_netcdf_error( 'check_open', 32 )
[1]	938	!
	939	!-- Read header information and set all ids. If there is a mismatch
	940	!-- between the previuos and the actual run, netcdf_extend is returned
	941	!-- as .FALSE.
	942	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	943
	944	!
	945	!-- Remove the local file, if it can not be extended
	946	IF ( .NOT. netcdf_extend ) THEN
	947	nc_stat = NF90_CLOSE( id_set_ts )
[263]	948	CALL handle_netcdf_error( 'check_open', 33 )
[102]	949	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	950	ENDIF
	951
	952	ENDIF
	953
	954	IF ( .NOT. netcdf_extend ) THEN
	955	!
	956	!-- Create a new NetCDF output file
	957	IF ( netcdf_64bit ) THEN
	958	#if defined( __netcdf_64bit )
[102]	959	nc_stat = NF90_CREATE( filename, &
[1]	960	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	961	id_set_ts )
[247]	962	#else
[274]	963	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	964	'on this machine'
[247]	965	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	966
[102]	967	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	968	#endif
	969	ELSE
[102]	970	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	971	ENDIF
[263]	972	CALL handle_netcdf_error( 'check_open', 34 )
[1]	973	!
	974	!-- Define the header
	975	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	976
	977	ENDIF
	978
	979
	980	CASE ( 106, 116 )
	981	!
	982	!-- Set filename depending on unit number
	983	IF ( file_id == 106 ) THEN
[102]	984	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	985	av = 0
	986	ELSE
[102]	987	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	988	av = 1
	989	ENDIF
	990	!
	991	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	992	!-- be opened for extension, if its dimensions and variables match the
	993	!-- actual run.
	994	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	995
	996	IF ( netcdf_extend ) THEN
	997	!
	998	!-- Open an existing NetCDF file for output
	999	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
[263]	1000	CALL handle_netcdf_error( 'check_open', 35 )
[1]	1001	!
	1002	!-- Read header information and set all ids. If there is a mismatch
	1003	!-- between the previuos and the actual run, netcdf_extend is returned
	1004	!-- as .FALSE.
	1005	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1006
	1007	!
	1008	!-- Remove the local file, if it can not be extended
	1009	IF ( .NOT. netcdf_extend ) THEN
	1010	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1011	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1012	CALL local_system('rm ' // TRIM( filename ) )
	1013	ENDIF
	1014
	1015	ENDIF
	1016
	1017	IF ( .NOT. netcdf_extend ) THEN
	1018	!
	1019	!-- Create a new NetCDF output file
[120]	1020	IF ( netcdf_64bit_3d ) THEN
[1]	1021	#if defined( __netcdf_64bit )
	1022	nc_stat = NF90_CREATE( filename, &
	1023	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1024	id_set_3d(av) )
[247]	1025	#else
[274]	1026	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	1027	'on this machine'
[247]	1028	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	1029
[1]	1030	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1031	#endif
	1032	ELSE
	1033	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1034	ENDIF
[263]	1035	CALL handle_netcdf_error( 'check_open', 37 )
[1]	1036	!
	1037	!-- Define the header
	1038	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1039
	1040	ENDIF
	1041
	1042
	1043	CASE ( 107 )
	1044	!
[102]	1045	!-- Set filename
	1046	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1047
	1048	!
[1]	1049	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1050	!-- be opened for extension, if its variables match the actual run.
[102]	1051	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1052
	1053	IF ( netcdf_extend ) THEN
	1054	!
	1055	!-- Open an existing NetCDF file for output
[102]	1056	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
[263]	1057	CALL handle_netcdf_error( 'check_open', 38 )
	1058
[1]	1059	!
	1060	!-- Read header information and set all ids. If there is a mismatch
	1061	!-- between the previuos and the actual run, netcdf_extend is returned
	1062	!-- as .FALSE.
	1063	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1064
	1065	!
	1066	!-- Remove the local file, if it can not be extended
	1067	IF ( .NOT. netcdf_extend ) THEN
	1068	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1069	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1070	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1071	ENDIF
	1072
	1073	ENDIF
	1074
	1075	IF ( .NOT. netcdf_extend ) THEN
	1076	!
	1077	!-- Create a new NetCDF output file
	1078	IF ( netcdf_64bit ) THEN
	1079	#if defined( __netcdf_64bit )
[102]	1080	nc_stat = NF90_CREATE( filename, &
[1]	1081	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1082	id_set_sp )
[247]	1083	#else
[274]	1084	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	1085	'on this machine'
[247]	1086	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	1087
[102]	1088	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1089	#endif
	1090	ELSE
[102]	1091	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1092	ENDIF
[263]	1093	CALL handle_netcdf_error( 'check_open', 40 )
[1]	1094	!
	1095	!-- Define the header
	1096	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1097
	1098	ENDIF
	1099
	1100
	1101	CASE ( 108 )
	1102
	1103	IF ( myid_char == '' ) THEN
[102]	1104	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1105	ELSE
[105]	1106	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1107	myid_char
[1]	1108	ENDIF
	1109	!
	1110	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1111	!-- be opened for extension, if its variables match the actual run.
	1112	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1113
	1114	IF ( netcdf_extend ) THEN
	1115	!
	1116	!-- Open an existing NetCDF file for output
	1117	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
[263]	1118	CALL handle_netcdf_error( 'check_open', 41 )
[1]	1119	!
	1120	!-- Read header information and set all ids. If there is a mismatch
	1121	!-- between the previuos and the actual run, netcdf_extend is returned
	1122	!-- as .FALSE.
	1123	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1124
	1125	!
	1126	!-- Remove the local file, if it can not be extended
	1127	IF ( .NOT. netcdf_extend ) THEN
	1128	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1129	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1130	CALL local_system( 'rm ' // filename )
	1131	ENDIF
	1132
	1133	ENDIF
	1134
	1135	IF ( .NOT. netcdf_extend ) THEN
	1136
	1137	!
	1138	!-- For runs on multiple processors create the subdirectory
	1139	IF ( myid_char /= '' ) THEN
	1140	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1141	THEN ! needs modification in case of non-extendable sets
[102]	1142	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1143	TRIM( coupling_char ) // '/' )
[1]	1144	ENDIF
	1145	#if defined( __parallel )
	1146	!
	1147	!-- Set a barrier in order to allow that all other processors in the
	1148	!-- directory created by PE0 can open their file
	1149	CALL MPI_BARRIER( comm2d, ierr )
	1150	#endif
	1151	ENDIF
	1152
	1153	!
	1154	!-- Create a new NetCDF output file
	1155	IF ( netcdf_64bit ) THEN
	1156	#if defined( __netcdf_64bit )
	1157	nc_stat = NF90_CREATE( filename, &
	1158	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1159	id_set_prt )
	1160	#else
[274]	1161	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	1162	'on this machine'
[247]	1163	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	1164
[1]	1165	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1166	#endif
	1167	ELSE
	1168	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1169	ENDIF
[263]	1170	CALL handle_netcdf_error( 'check_open', 43 )
[1]	1171
	1172	!
	1173	!-- Define the header
	1174	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1175
	1176	ENDIF
	1177
	1178	CASE ( 109 )
	1179	!
[102]	1180	!-- Set filename
	1181	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1182
	1183	!
[1]	1184	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1185	!-- be opened for extension, if its variables match the actual run.
[102]	1186	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1187
	1188	IF ( netcdf_extend ) THEN
	1189	!
	1190	!-- Open an existing NetCDF file for output
[102]	1191	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
[263]	1192	CALL handle_netcdf_error( 'check_open', 393 )
[1]	1193	!
	1194	!-- Read header information and set all ids. If there is a mismatch
	1195	!-- between the previuos and the actual run, netcdf_extend is returned
	1196	!-- as .FALSE.
	1197	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1198
	1199	!
	1200	!-- Remove the local file, if it can not be extended
	1201	IF ( .NOT. netcdf_extend ) THEN
	1202	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1203	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1204	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1205	ENDIF
	1206
	1207	ENDIF
	1208
	1209	IF ( .NOT. netcdf_extend ) THEN
	1210	!
	1211	!-- Create a new NetCDF output file
	1212	IF ( netcdf_64bit ) THEN
	1213	#if defined( __netcdf_64bit )
[102]	1214	nc_stat = NF90_CREATE( filename, &
[1]	1215	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1216	id_set_pts )
	1217	#else
[274]	1218	message_string = 'NetCDF: no 64-bit offset allowed ' // &
	1219	'on this machine'
[247]	1220	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
	1221
[102]	1222	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1223	#endif
	1224	ELSE
[102]	1225	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1226	ENDIF
[263]	1227	CALL handle_netcdf_error( 'check_open', 395 )
[1]	1228	!
	1229	!-- Define the header
	1230	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1231
	1232	ENDIF
	1233	#else
	1234
	1235	CASE ( 101:109, 111:113, 116 )
	1236
	1237	!
	1238	!-- Nothing is done in case of missing netcdf support
	1239	RETURN
	1240
	1241	#endif
	1242
	1243	CASE DEFAULT
	1244
[247]	1245	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1246	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1247
	1248	END SELECT
	1249
	1250	!
	1251	!-- Set open flag
	1252	openfile(file_id)%opened = .TRUE.
	1253
	1254	!
	1255	!-- Formats
	1256	3300 FORMAT ('#'/ &
	1257	'coord 1 file=',A,' filetype=unformatted'/ &
	1258	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1259	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1260	'#')
	1261	4000 FORMAT ('# ',A)
	1262	5000 FORMAT ('# ',A/ &
	1263	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1264	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1265	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1266	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1267	8000 FORMAT (A/ &
	1268	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1269	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1270	103('-'))
	1271
	1272	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |