Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 2304

Last change on this file since 2304 was 2300, checked in by raasch, 7 years ago
NEC related code partly removed, host variable partly removed, host specific code completely removed, default values for host, loop_optimization and termination time_needed changed
Property svn:keywords set to `Id`
File size: 44.1 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[1036]	3	! This file is part of PALM.
	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[1804]	14	! You should have received a copy of the GNU fGeneral Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2101]	17	! Copyright 1997-2017 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[2298]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 2300 2017-06-29 13:31:14Z suehring $
[2300]	27	! -host
	28	!
	29	! 2298 2017-06-29 09:28:18Z raasch
[2298]	30	! -return_addres, return_username, avs_coor_file_..., avs_data_file_...,
	31	! cross_ts_numbers, cross_ts_number_count
[1321]	32	!
[2298]	33	! 2101 2017-01-05 16:42:31Z suehring
	34	!
[2064]	35	! 2063 2016-11-10 17:14:35Z raasch
	36	! bugfix: opening of PROGRESS file moved out of the NetCDF block
	37	!
[2041]	38	! 2040 2016-10-26 16:58:09Z gronemeier
[2040]	39	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
	40	!
[2001]	41	! 2000 2016-08-20 18:09:15Z knoop
	42	! Forced header and separation lines into 80 columns
	43	!
[1989]	44	! 1988 2016-08-10 14:49:06Z gronemeier
	45	! informative message added if files cannot be opened in newly created directory
	46	!
[1987]	47	! 1986 2016-08-10 14:07:17Z gronemeier
	48	! Bugfix: check if output can be opened in newly created directory. If not
	49	! wait one second and try again.
	50	!
[1975]	51	! 1974 2016-07-26 08:43:25Z gronemeier
	52	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	53	! in case of parallel I/O
	54	!
[1958]	55	! 1957 2016-07-07 10:43:48Z suehring
	56	! flight module added
	57	!
[1805]	58	! 1804 2016-04-05 16:30:18Z maronga
	59	! Removed code for parameter file check (__check)
	60	!
[1784]	61	! 1783 2016-03-06 18:36:17Z raasch
	62	! name change of netcdf routines and module + related changes
	63	!
[1780]	64	! 1779 2016-03-03 08:01:28Z raasch
	65	! coupling_char is trimmed at every place it occurs, because it can have
	66	! different length now
	67	!
[1746]	68	! 1745 2016-02-05 13:06:51Z gronemeier
	69	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	70	!
[1683]	71	! 1682 2015-10-07 23:56:08Z knoop
	72	! Code annotations made doxygen readable
	73	!
[1552]	74	! 1551 2015-03-03 14:18:16Z maronga
	75	! Removed redundant output for combine_plot_fields
	76	!
[1469]	77	! 1468 2014-09-24 14:06:57Z maronga
	78	! Adapted for use on up to 6-digit processor cores
	79	! Added file unit 117 (PROGRESS)
	80	!
[1360]	81	! 1359 2014-04-11 17:15:14Z hoffmann
	82	! Format of particle exchange statistics extended to reasonable numbers of
	83	! particles.
	84	!
[1354]	85	! 1353 2014-04-08 15:21:23Z heinze
	86	! REAL constants provided with KIND-attribute,
	87	! declaration for unused variables xkoor, ykoor, zkoor removed
	88	!
[1329]	89	! 1327 2014-03-21 11:00:16Z raasch
	90	! parts concerning iso2d and avs output removed
	91	!
[1321]	92	! 1320 2014-03-20 08:40:49Z raasch
[1320]	93	! ONLY-attribute added to USE-statements,
	94	! kind-parameters added to all INTEGER and REAL declaration statements,
	95	! kinds are defined in new module kinds,
	96	! old module precision_kind is removed,
	97	! revision history before 2012 removed,
	98	! comment fields (!:) to be used for variable explanations added to
	99	! all variable declaration statements
[1]	100	!
[1107]	101	! 1106 2013-03-04 05:31:38Z raasch
	102	! array_kind renamed precision_kind
	103	!
[1093]	104	! 1092 2013-02-02 11:24:22Z raasch
	105	! unused variables removed
	106	!
[1037]	107	! 1036 2012-10-22 13:43:42Z raasch
	108	! code put under GPL (PALM 3.9)
	109	!
[1035]	110	! 1031 2012-10-19 14:35:30Z raasch
	111	! netCDF4 without parallel file support implemented,
	112	! opening of netCDF files are done by new routines create_netcdf_file and
	113	! open_write_netcdf_file
	114	!
[965]	115	! 964 2012-07-26 09:14:24Z raasch
	116	! old profil-units (40:49) removed,
	117	! append feature removed from unit 14
	118	!
[850]	119	! 849 2012-03-15 10:35:09Z raasch
	120	! comment changed
	121	!
[810]	122	! 809 2012-01-30 13:32:58Z maronga
	123	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	124	!
[808]	125	! 807 2012-01-25 11:53:51Z maronga
	126	! New cpp directive "__check" implemented which is used by check_namelist_files
	127	!
[1]	128	! Revision 1.1 1997/08/11 06:10:55 raasch
	129	! Initial revision
	130	!
	131	!
	132	! Description:
	133	! ------------
[1682]	134	!> Check if file unit is open. If not, open file and, if necessary, write a
	135	!> header or start other initializing actions, respectively.
[1]	136	!------------------------------------------------------------------------------!
[1682]	137	SUBROUTINE check_open( file_id )
	138
[1]	139
[1320]	140	USE arrays_3d, &
	141	ONLY: zu
	142
	143	USE control_parameters, &
[2300]	144	ONLY: coupling_char, data_output_2d_on_each_pe, max_masks, &
[2298]	145	message_string, mid, nz_do3d, openfile, run_description_header, &
	146	runnr
[1320]	147
	148	USE grid_variables, &
	149	ONLY: dx, dy
	150
	151	USE indices, &
[1551]	152	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
[1320]	153
	154	USE kinds
	155
[1783]	156	#if defined( __netcdf )
	157	USE NETCDF
	158	#endif
[1320]	159
[1783]	160	USE netcdf_interface, &
[1957]	161	ONLY: id_set_fl, id_set_mask, id_set_pr, id_set_prt, id_set_pts, &
	162	id_set_sp, id_set_ts, id_set_xy, id_set_xz, id_set_yz, &
	163	id_set_3d, nc_stat, netcdf_create_file, netcdf_data_format, &
	164	netcdf_define_header, netcdf_handle_error, netcdf_open_write_file
[1783]	165
[1320]	166	USE particle_attributes, &
	167	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	168	particle_groups
	169
[1]	170	USE pegrid
	171
[1986]	172	USE posix_calls_from_fortran, &
	173	ONLY: fortran_sleep
	174
[1320]	175
[1]	176	IMPLICIT NONE
	177
[1682]	178	CHARACTER (LEN=2) :: mask_char !<
	179	CHARACTER (LEN=2) :: suffix !<
	180	CHARACTER (LEN=20) :: xtext = 'time in s' !<
	181	CHARACTER (LEN=30) :: filename !<
	182	CHARACTER (LEN=80) :: rtext !<
	183	CHARACTER (LEN=100) :: batch_scp !<
	184	CHARACTER (LEN=100) :: line !<
	185	CHARACTER (LEN=400) :: command !<
[1]	186
[1682]	187	INTEGER(iwp) :: av !<
	188	INTEGER(iwp) :: numline = 1 !<
	189	INTEGER(iwp) :: cranz !<
	190	INTEGER(iwp) :: file_id !<
	191	INTEGER(iwp) :: i !<
	192	INTEGER(iwp) :: iaddres !<
[1986]	193	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[1682]	194	INTEGER(iwp) :: iusern !<
	195	INTEGER(iwp) :: j !<
	196	INTEGER(iwp) :: k !<
	197	INTEGER(iwp) :: legpos = 1 !<
	198	INTEGER(iwp) :: timodex = 1 !<
[1320]	199
[1682]	200	INTEGER(iwp), DIMENSION(10) :: klist !<
[1]	201
[1682]	202	LOGICAL :: datleg = .TRUE. !<
	203	LOGICAL :: get_filenames !<
	204	LOGICAL :: grid = .TRUE. !<
	205	LOGICAL :: netcdf_extend !<
	206	LOGICAL :: rand = .TRUE. !<
	207	LOGICAL :: swap = .TRUE. !<
	208	LOGICAL :: twoxa = .TRUE. !<
	209	LOGICAL :: twoya = .TRUE. !<
[1]	210
[1682]	211	REAL(wp) :: ansx = -999.999_wp !<
	212	REAL(wp) :: ansy = -999.999_wp !<
	213	REAL(wp) :: gwid = 0.1_wp !<
	214	REAL(wp) :: rlegfak = 1.5_wp !<
	215	REAL(wp) :: sizex = 250.0_wp !<
	216	REAL(wp) :: sizey = 40.0_wp !<
	217	REAL(wp) :: texfac = 1.5_wp !<
[1]	218
[1682]	219	REAL(wp), DIMENSION(:), ALLOCATABLE :: eta !<
	220	REAL(wp), DIMENSION(:), ALLOCATABLE :: ho !<
	221	REAL(wp), DIMENSION(:), ALLOCATABLE :: hu !<
[1353]	222
[1]	223
	224
[1320]	225	NAMELIST /RAHMEN/ numline, cranz, datleg, rtext, swap
	226	NAMELIST /CROSS/ ansx, ansy, grid, gwid, klist, legpos, &
	227	rand, rlegfak, sizex, sizey, texfac, &
[1]	228	timodex, twoxa, twoya, xtext
	229
	230
	231	!
	232	!-- Immediate return if file already open
	233	IF ( openfile(file_id)%opened ) RETURN
	234
	235	!
	236	!-- Only certain files are allowed to be re-opened
	237	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	238	!-- has not been checked so far, if it works!
	239	IF ( openfile(file_id)%opened_before ) THEN
	240	SELECT CASE ( file_id )
[1468]	241	CASE ( 13, 14, 21, 22, 23, 80:85, 117 )
[1]	242	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	243	message_string = 're-open of unit ' // &
[274]	244	'14 is not verified. Please check results!'
[247]	245	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	246	ENDIF
[143]	247
[1]	248	CASE DEFAULT
[1320]	249	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	250	' is not allowed'
[247]	251	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	252
[1]	253	RETURN
[143]	254
[1]	255	END SELECT
	256	ENDIF
	257
	258	!
	259	!-- Check if file may be opened on the relevant PE
	260	SELECT CASE ( file_id )
	261
[1468]	262	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109, 117 )
[410]	263
[493]	264	IF ( myid /= 0 ) THEN
[1320]	265	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	266	' not allowed for PE ',myid
	267	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	268	ENDIF
	269
[564]	270	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	271
[1031]	272	IF ( netcdf_data_format < 5 ) THEN
[247]	273
[410]	274	IF ( myid /= 0 ) THEN
[1320]	275	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	276	' not allowed for PE ',myid
	277	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	278	ENDIF
	279
[493]	280	ENDIF
[1]	281
	282	CASE ( 21, 22, 23 )
	283
	284	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	285	IF ( myid /= 0 ) THEN
[1320]	286	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	287	' not allowed for PE ',myid
[277]	288	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	289	END IF
[1]	290	ENDIF
	291
[1327]	292	CASE ( 27, 28, 29, 31, 33, 71:73, 90:99 )
[1]	293
	294	!
	295	!-- File-ids that are used temporarily in other routines
[1320]	296	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	297	' is not allowed since it is used otherwise'
[247]	298	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	299
[1]	300	END SELECT
	301
	302	!
	303	!-- Open relevant files
	304	SELECT CASE ( file_id )
	305
	306	CASE ( 11 )
	307
[1779]	308	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
[102]	309	STATUS='OLD' )
[1]	310
	311	CASE ( 13 )
	312
	313	IF ( myid_char == '' ) THEN
[1779]	314	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	315	FORM='UNFORMATTED', STATUS='OLD' )
[1]	316	ELSE
[143]	317	!
[1468]	318	!-- First opening of unit 13 openes file _000000 on all PEs because
	319	!-- only this file contains the global variables
[143]	320	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	321	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	322	FORM='UNFORMATTED', STATUS='OLD' )
	323	ELSE
[1779]	324	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	325	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	326	ENDIF
[1]	327	ENDIF
	328
	329	CASE ( 14 )
	330
	331	IF ( myid_char == '' ) THEN
[1779]	332	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	333	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	334	ELSE
	335	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	336	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	337	ENDIF
[1804]	338	#if defined( __parallel )
[1]	339	!
	340	!-- Set a barrier in order to allow that all other processors in the
	341	!-- directory created by PE0 can open their file
	342	CALL MPI_BARRIER( comm2d, ierr )
	343	#endif
[1986]	344	ioerr = 1
	345	DO WHILE ( ioerr /= 0 )
	346	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	347	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	348	IF ( ioerr /= 0 ) THEN
	349	WRITE( 9, * ) '*** could not open "BINOUT'// &
	350	TRIM(coupling_char)//'/'//myid_char// &
	351	'"! Trying again in 1 sec.'
	352	CALL fortran_sleep( 1 )
	353	ENDIF
[1986]	354	ENDDO
	355
[1]	356	ENDIF
	357
	358	CASE ( 15 )
	359
[1779]	360	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	361	FORM='FORMATTED' )
[1]	362
	363	CASE ( 16 )
	364
[1779]	365	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	366	FORM='FORMATTED' )
[1]	367
	368	CASE ( 17 )
	369
[1779]	370	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	371	FORM='FORMATTED' )
[1]	372
	373	CASE ( 18 )
	374
[1779]	375	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	376	FORM='FORMATTED' )
[1]	377
	378	CASE ( 19 )
	379
[1779]	380	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	381
	382	CASE ( 20 )
	383
	384	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	385	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	386	ENDIF
	387	IF ( myid_char == '' ) THEN
[1779]	388	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	389	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	390	ELSE
[1804]	391	#if defined( __parallel )
[1]	392	!
	393	!-- Set a barrier in order to allow that all other processors in the
	394	!-- directory created by PE0 can open their file
	395	CALL MPI_BARRIER( comm2d, ierr )
	396	#endif
[1986]	397	ioerr = 1
	398	DO WHILE ( ioerr /= 0 )
	399	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	400	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	401	IOSTAT=ioerr )
[1988]	402	IF ( ioerr /= 0 ) THEN
	403	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	404	TRIM( coupling_char )//'/'//myid_char// &
	405	'"! Trying again in 1 sec.'
	406	CALL fortran_sleep( 1 )
	407	ENDIF
[1986]	408	ENDDO
	409
[1]	410	ENDIF
	411
	412	CASE ( 21 )
	413
	414	IF ( data_output_2d_on_each_pe ) THEN
[1320]	415	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	416	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	417	ELSE
[1779]	418	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	419	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	420	ENDIF
	421
	422	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	423	!
	424	!-- Output for combine_plot_fields
	425	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	426	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	427	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	428	ENDIF
	429	!
	430	!-- Determine and write ISO2D coordiante header
	431	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
[1353]	432	hu = 0.0_wp
[1]	433	ho = (ny+1) * dy
	434	DO i = 1, ny
[1353]	435	eta(i) = REAL( i ) / ( ny + 1.0_wp )
[1]	436	ENDDO
[1353]	437	eta(0) = 0.0_wp
	438	eta(ny+1) = 1.0_wp
[1]	439
	440	WRITE (21) dx,eta,hu,ho
	441	DEALLOCATE( eta, ho, hu )
	442
	443	ENDIF
	444
	445	CASE ( 22 )
	446
	447	IF ( data_output_2d_on_each_pe ) THEN
[1320]	448	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	449	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	450	ELSE
[1779]	451	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	452	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	453	ENDIF
	454
	455	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	456	!
	457	!-- Output for combine_plot_fields
	458	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	459	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	460	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	461	ENDIF
	462	!
[1327]	463	!-- Determine and write ISO2D coordinate header
[1]	464	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
[1353]	465	hu = 0.0_wp
[1]	466	ho = zu(nz+1)
	467	DO i = 1, nz
	468	eta(i) = REAL( zu(i) ) / zu(nz+1)
	469	ENDDO
[1353]	470	eta(0) = 0.0_wp
	471	eta(nz+1) = 1.0_wp
[1]	472
	473	WRITE (22) dx,eta,hu,ho
	474	DEALLOCATE( eta, ho, hu )
	475
	476	ENDIF
	477
	478	CASE ( 23 )
	479
	480	IF ( data_output_2d_on_each_pe ) THEN
[1320]	481	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	482	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	483	ELSE
[1779]	484	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	485	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	486	ENDIF
	487
	488	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	489	!
	490	!-- Output for combine_plot_fields
	491	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	492	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	493	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	494	ENDIF
	495	!
	496	!-- Determine and write ISO2D coordiante header
	497	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
[1353]	498	hu = 0.0_wp
[1]	499	ho = zu(nz+1)
	500	DO i = 1, nz
	501	eta(i) = REAL( zu(i) ) / zu(nz+1)
	502	ENDDO
[1353]	503	eta(0) = 0.0_wp
	504	eta(nz+1) = 1.0_wp
[1]	505
	506	WRITE (23) dx,eta,hu,ho
	507	DEALLOCATE( eta, ho, hu )
	508
	509	ENDIF
	510
	511	CASE ( 30 )
	512
[1320]	513	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	514	FORM='UNFORMATTED' )
[1]	515	!
	516	!-- Write coordinate file for AVS
	517	IF ( myid == 0 ) THEN
	518	#if defined( __parallel )
	519	!
	520	!-- Specifications for combine_plot_fields
[1551]	521	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp
[1327]	522	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
[1]	523	#endif
	524	ENDIF
	525
	526	CASE ( 80 )
	527
	528	IF ( myid_char == '' ) THEN
[105]	529	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	530	FORM='FORMATTED', POSITION='APPEND' )
[1]	531	ELSE
	532	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	533	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	534	TRIM( coupling_char ) )
[1]	535	ENDIF
[1804]	536	#if defined( __parallel )
[1]	537	!
	538	!-- Set a barrier in order to allow that thereafter all other
	539	!-- processors in the directory created by PE0 can open their file.
	540	!-- WARNING: The following barrier will lead to hanging jobs, if
	541	!-- check_open is first called from routine
	542	!-- allocate_prt_memory!
	543	IF ( .NOT. openfile(80)%opened_before ) THEN
	544	CALL MPI_BARRIER( comm2d, ierr )
	545	ENDIF
	546	#endif
[1320]	547	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	548	myid_char, &
[102]	549	FORM='FORMATTED', POSITION='APPEND' )
[1]	550	ENDIF
	551
	552	IF ( .NOT. openfile(80)%opened_before ) THEN
	553	WRITE ( 80, 8000 ) TRIM( run_description_header )
	554	ENDIF
	555
	556	CASE ( 81 )
	557
[1779]	558	OPEN ( 81, FILE='PLOTSP_X_PAR'//TRIM( coupling_char ), &
	559	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
	560	POSITION='APPEND' )
[1]	561
	562	CASE ( 82 )
	563
[1779]	564	OPEN ( 82, FILE='PLOTSP_X_DATA'//TRIM( coupling_char ), &
	565	FORM='FORMATTED', POSITION = 'APPEND' )
[1]	566
	567	CASE ( 83 )
	568
[1779]	569	OPEN ( 83, FILE='PLOTSP_Y_PAR'//TRIM( coupling_char ), &
	570	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
	571	POSITION='APPEND' )
[1]	572
	573	CASE ( 84 )
	574
[1779]	575	OPEN ( 84, FILE='PLOTSP_Y_DATA'//TRIM( coupling_char ), &
	576	FORM='FORMATTED', POSITION='APPEND' )
[1]	577
	578	CASE ( 85 )
	579
	580	IF ( myid_char == '' ) THEN
[1320]	581	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	582	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	583	ELSE
	584	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	585	CALL local_system( 'mkdir PARTICLE_DATA' // &
	586	TRIM( coupling_char ) )
[1]	587	ENDIF
[1804]	588	#if defined( __parallel )
[1]	589	!
	590	!-- Set a barrier in order to allow that thereafter all other
	591	!-- processors in the directory created by PE0 can open their file
	592	CALL MPI_BARRIER( comm2d, ierr )
	593	#endif
[1986]	594	ioerr = 1
	595	DO WHILE ( ioerr /= 0 )
	596	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	597	myid_char, &
	598	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	599	IF ( ioerr /= 0 ) THEN
	600	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	601	TRIM( coupling_char )//'/'//myid_char// &
	602	'"! Trying again in 1 sec.'
	603	CALL fortran_sleep( 1 )
	604	ENDIF
[1986]	605	ENDDO
	606
[1]	607	ENDIF
	608
	609	IF ( .NOT. openfile(85)%opened_before ) THEN
	610	WRITE ( 85 ) run_description_header
	611	!
	612	!-- Attention: change version number whenever the output format on
[849]	613	!-- unit 85 is changed (see also in routine
	614	!-- lpm_data_output_particles)
[1359]	615	rtext = 'data format version 3.1'
[1]	616	WRITE ( 85 ) rtext
[1320]	617	WRITE ( 85 ) number_of_particle_groups, &
[1]	618	max_number_of_particle_groups
	619	WRITE ( 85 ) particle_groups
[1359]	620	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	621	ENDIF
	622
[2063]	623	!
	624	!-- Progress file that is used by the PALM watchdog
	625	CASE ( 117 )
	626
	627	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	628	STATUS='REPLACE', FORM='FORMATTED' )
	629
[1]	630	#if defined( __netcdf )
	631	CASE ( 101, 111 )
	632	!
	633	!-- Set filename depending on unit number
	634	IF ( file_id == 101 ) THEN
[1779]	635	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	636	av = 0
	637	ELSE
[1779]	638	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	639	av = 1
	640	ENDIF
	641	!
[1031]	642	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	643	!-- be opened for extension, if its dimensions and variables match the
	644	!-- actual run.
	645	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	646	IF ( netcdf_extend ) THEN
	647	!
[1031]	648	!-- Open an existing netCDF file for output
[1783]	649	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	650	!
	651	!-- Read header information and set all ids. If there is a mismatch
	652	!-- between the previuos and the actual run, netcdf_extend is returned
	653	!-- as .FALSE.
[1783]	654	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	655
	656	!
	657	!-- Remove the local file, if it can not be extended
	658	IF ( .NOT. netcdf_extend ) THEN
	659	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	660	CALL netcdf_handle_error( 'check_open', 21 )
[493]	661	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	662	#if defined( __parallel )
[1745]	663	!
	664	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	665	!-- before any other processor tries to open a new file.
	666	!-- Barrier is only needed in case of parallel I/O
	667	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	668	#endif
[1]	669	ENDIF
	670
[1745]	671	ENDIF
[1]	672
	673	IF ( .NOT. netcdf_extend ) THEN
	674	!
[1031]	675	!-- Create a new netCDF output file with requested netCDF format
[1783]	676	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	677
	678	!
[1]	679	!-- Define the header
[1783]	680	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	681
[493]	682	!
[1031]	683	!-- In case of parallel netCDF output, create flag file which tells
[493]	684	!-- combine_plot_fields that nothing is to do.
[1031]	685	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	686	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	687	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	688	CLOSE( 99 )
	689	ENDIF
	690
[1]	691	ENDIF
	692
	693	CASE ( 102, 112 )
	694	!
	695	!-- Set filename depending on unit number
	696	IF ( file_id == 102 ) THEN
[1779]	697	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	698	av = 0
	699	ELSE
[1779]	700	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	701	av = 1
	702	ENDIF
	703	!
[1031]	704	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	705	!-- be opened for extension, if its dimensions and variables match the
	706	!-- actual run.
	707	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	708
	709	IF ( netcdf_extend ) THEN
	710	!
[1031]	711	!-- Open an existing netCDF file for output
[1783]	712	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	713	!
	714	!-- Read header information and set all ids. If there is a mismatch
	715	!-- between the previuos and the actual run, netcdf_extend is returned
	716	!-- as .FALSE.
[1783]	717	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	718
	719	!
	720	!-- Remove the local file, if it can not be extended
	721	IF ( .NOT. netcdf_extend ) THEN
	722	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	723	CALL netcdf_handle_error( 'check_open', 24 )
[493]	724	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	725	#if defined( __parallel )
[1745]	726	!
	727	!-- Set a barrier in order to assure that PE0 deleted the old file
	728	!-- before any other processor tries to open a new file
[1974]	729	!-- Barrier is only needed in case of parallel I/O
	730	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	731	#endif
[1]	732	ENDIF
	733
[1745]	734	ENDIF
[1]	735
	736	IF ( .NOT. netcdf_extend ) THEN
	737	!
[1031]	738	!-- Create a new netCDF output file with requested netCDF format
[1783]	739	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	740
	741	!
[1]	742	!-- Define the header
[1783]	743	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	744
[493]	745	!
[1031]	746	!-- In case of parallel netCDF output, create flag file which tells
[493]	747	!-- combine_plot_fields that nothing is to do.
[1031]	748	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	749	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	750	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	751	CLOSE( 99 )
	752	ENDIF
	753
[1]	754	ENDIF
	755
	756	CASE ( 103, 113 )
	757	!
	758	!-- Set filename depending on unit number
	759	IF ( file_id == 103 ) THEN
[1779]	760	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	761	av = 0
	762	ELSE
[1779]	763	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	764	av = 1
	765	ENDIF
	766	!
[1031]	767	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	768	!-- be opened for extension, if its dimensions and variables match the
	769	!-- actual run.
	770	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	771
	772	IF ( netcdf_extend ) THEN
	773	!
[1031]	774	!-- Open an existing netCDF file for output
[1783]	775	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	776	!
	777	!-- Read header information and set all ids. If there is a mismatch
	778	!-- between the previuos and the actual run, netcdf_extend is returned
	779	!-- as .FALSE.
[1783]	780	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	781
	782	!
	783	!-- Remove the local file, if it can not be extended
	784	IF ( .NOT. netcdf_extend ) THEN
	785	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	786	CALL netcdf_handle_error( 'check_open', 27 )
[493]	787	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	788	#if defined( __parallel )
[1745]	789	!
	790	!-- Set a barrier in order to assure that PE0 deleted the old file
	791	!-- before any other processor tries to open a new file
[1974]	792	!-- Barrier is only needed in case of parallel I/O
	793	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	794	#endif
[1]	795	ENDIF
	796
[1745]	797	ENDIF
[1]	798
	799	IF ( .NOT. netcdf_extend ) THEN
	800	!
[1031]	801	!-- Create a new netCDF output file with requested netCDF format
[1783]	802	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	803
	804	!
[1]	805	!-- Define the header
[1783]	806	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	807
[493]	808	!
[1031]	809	!-- In case of parallel netCDF output, create flag file which tells
[493]	810	!-- combine_plot_fields that nothing is to do.
[1031]	811	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	812	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	813	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	814	CLOSE( 99 )
	815	ENDIF
	816
[1]	817	ENDIF
	818
	819	CASE ( 104 )
	820	!
[102]	821	!-- Set filename
[1779]	822	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	823
	824	!
[1031]	825	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	826	!-- be opened for extension, if its variables match the actual run.
[102]	827	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	828
	829	IF ( netcdf_extend ) THEN
	830	!
[1031]	831	!-- Open an existing netCDF file for output
[1783]	832	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	833	!
	834	!-- Read header information and set all ids. If there is a mismatch
	835	!-- between the previuos and the actual run, netcdf_extend is returned
	836	!-- as .FALSE.
[1783]	837	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	838
	839	!
	840	!-- Remove the local file, if it can not be extended
	841	IF ( .NOT. netcdf_extend ) THEN
	842	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	843	CALL netcdf_handle_error( 'check_open', 30 )
[102]	844	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	845	ENDIF
	846
	847	ENDIF
	848
	849	IF ( .NOT. netcdf_extend ) THEN
	850	!
[1031]	851	!-- Create a new netCDF output file with requested netCDF format
[1783]	852	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	853	!
	854	!-- Define the header
[1783]	855	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	856
	857	ENDIF
	858
	859	CASE ( 105 )
	860	!
[102]	861	!-- Set filename
[1779]	862	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	863
	864	!
[1031]	865	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	866	!-- be opened for extension, if its variables match the actual run.
[102]	867	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	868
	869	IF ( netcdf_extend ) THEN
	870	!
[1031]	871	!-- Open an existing netCDF file for output
[1783]	872	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	873	!
	874	!-- Read header information and set all ids. If there is a mismatch
	875	!-- between the previuos and the actual run, netcdf_extend is returned
	876	!-- as .FALSE.
[1783]	877	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	878
	879	!
	880	!-- Remove the local file, if it can not be extended
	881	IF ( .NOT. netcdf_extend ) THEN
	882	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	883	CALL netcdf_handle_error( 'check_open', 33 )
[102]	884	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	885	ENDIF
	886
	887	ENDIF
	888
	889	IF ( .NOT. netcdf_extend ) THEN
	890	!
[1031]	891	!-- Create a new netCDF output file with requested netCDF format
[1783]	892	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	893	!
	894	!-- Define the header
[1783]	895	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	896
	897	ENDIF
	898
	899
	900	CASE ( 106, 116 )
	901	!
	902	!-- Set filename depending on unit number
	903	IF ( file_id == 106 ) THEN
[1779]	904	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	905	av = 0
	906	ELSE
[1779]	907	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	908	av = 1
	909	ENDIF
	910	!
[1031]	911	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	912	!-- be opened for extension, if its dimensions and variables match the
	913	!-- actual run.
	914	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	915
	916	IF ( netcdf_extend ) THEN
	917	!
[1031]	918	!-- Open an existing netCDF file for output
[1783]	919	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	920	!
	921	!-- Read header information and set all ids. If there is a mismatch
	922	!-- between the previuos and the actual run, netcdf_extend is returned
	923	!-- as .FALSE.
[1783]	924	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	925
	926	!
	927	!-- Remove the local file, if it can not be extended
	928	IF ( .NOT. netcdf_extend ) THEN
	929	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	930	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	931	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	932	#if defined( __parallel )
[1745]	933	!
	934	!-- Set a barrier in order to assure that PE0 deleted the old file
	935	!-- before any other processor tries to open a new file
[1974]	936	!-- Barrier is only needed in case of parallel I/O
	937	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	938	#endif
[1]	939	ENDIF
	940
[1745]	941	ENDIF
[1]	942
	943	IF ( .NOT. netcdf_extend ) THEN
	944	!
[1031]	945	!-- Create a new netCDF output file with requested netCDF format
[1783]	946	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	947
	948	!
[1]	949	!-- Define the header
[1783]	950	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	951
[493]	952	!
[1031]	953	!-- In case of parallel netCDF output, create flag file which tells
[493]	954	!-- combine_plot_fields that nothing is to do.
[1031]	955	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	956	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	957	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	958	CLOSE( 99 )
	959	ENDIF
	960
[1]	961	ENDIF
	962
	963
	964	CASE ( 107 )
	965	!
[102]	966	!-- Set filename
[1779]	967	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	968
	969	!
[1031]	970	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	971	!-- be opened for extension, if its variables match the actual run.
[102]	972	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	973
	974	IF ( netcdf_extend ) THEN
	975	!
[1031]	976	!-- Open an existing netCDF file for output
[1783]	977	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	978
[1]	979	!
	980	!-- Read header information and set all ids. If there is a mismatch
	981	!-- between the previuos and the actual run, netcdf_extend is returned
	982	!-- as .FALSE.
[1783]	983	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	984
	985	!
	986	!-- Remove the local file, if it can not be extended
	987	IF ( .NOT. netcdf_extend ) THEN
	988	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	989	CALL netcdf_handle_error( 'check_open', 39 )
[102]	990	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	991	ENDIF
	992
	993	ENDIF
	994
	995	IF ( .NOT. netcdf_extend ) THEN
	996	!
[1031]	997	!-- Create a new netCDF output file with requested netCDF format
[1783]	998	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	999	!
	1000	!-- Define the header
[1783]	1001	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1002
	1003	ENDIF
	1004
	1005
	1006	CASE ( 108 )
	1007
	1008	IF ( myid_char == '' ) THEN
[1779]	1009	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
[1]	1010	ELSE
[1320]	1011	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
[105]	1012	myid_char
[1]	1013	ENDIF
	1014	!
[1031]	1015	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1016	!-- be opened for extension, if its variables match the actual run.
	1017	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1018
	1019	IF ( netcdf_extend ) THEN
	1020	!
[1031]	1021	!-- Open an existing netCDF file for output
[1783]	1022	CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	1023	!
	1024	!-- Read header information and set all ids. If there is a mismatch
	1025	!-- between the previuos and the actual run, netcdf_extend is returned
	1026	!-- as .FALSE.
[1783]	1027	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1028
	1029	!
	1030	!-- Remove the local file, if it can not be extended
	1031	IF ( .NOT. netcdf_extend ) THEN
	1032	nc_stat = NF90_CLOSE( id_set_prt )
[1783]	1033	CALL netcdf_handle_error( 'check_open', 42 )
[1745]	1034	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1035	ENDIF
	1036
	1037	ENDIF
	1038
	1039	IF ( .NOT. netcdf_extend ) THEN
	1040
	1041	!
	1042	!-- For runs on multiple processors create the subdirectory
	1043	IF ( myid_char /= '' ) THEN
[1320]	1044	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
[1]	1045	THEN ! needs modification in case of non-extendable sets
[1320]	1046	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1047	TRIM( coupling_char ) // '/' )
[1]	1048	ENDIF
[1804]	1049	#if defined( __parallel )
[807]	1050	!
[1]	1051	!-- Set a barrier in order to allow that all other processors in the
	1052	!-- directory created by PE0 can open their file
	1053	CALL MPI_BARRIER( comm2d, ierr )
	1054	#endif
	1055	ENDIF
	1056
	1057	!
[1031]	1058	!-- Create a new netCDF output file with requested netCDF format
[1783]	1059	CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1060
	1061	!
[1]	1062	!-- Define the header
[1783]	1063	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1064
	1065	ENDIF
	1066
	1067	CASE ( 109 )
	1068	!
[102]	1069	!-- Set filename
[1779]	1070	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1071
	1072	!
[1031]	1073	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1074	!-- be opened for extension, if its variables match the actual run.
[102]	1075	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1076
	1077	IF ( netcdf_extend ) THEN
	1078	!
[1031]	1079	!-- Open an existing netCDF file for output
[1783]	1080	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1081	!
	1082	!-- Read header information and set all ids. If there is a mismatch
	1083	!-- between the previuos and the actual run, netcdf_extend is returned
	1084	!-- as .FALSE.
[1783]	1085	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1086
	1087	!
	1088	!-- Remove the local file, if it can not be extended
	1089	IF ( .NOT. netcdf_extend ) THEN
	1090	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1091	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1092	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1093	ENDIF
	1094
	1095	ENDIF
	1096
	1097	IF ( .NOT. netcdf_extend ) THEN
	1098	!
[1031]	1099	!-- Create a new netCDF output file with requested netCDF format
[1783]	1100	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1101	!
	1102	!-- Define the header
[1783]	1103	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1104
	1105	ENDIF
[410]	1106
[1468]	1107	!
[1957]	1108	!-- nc-file for virtual flight measurements
	1109	CASE ( 199 )
	1110	!
	1111	!-- Set filename
	1112	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1113
[1957]	1114	!
	1115	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1116	!-- be opened for extension, if its variables match the actual run.
	1117	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1118
[1957]	1119	IF ( netcdf_extend ) THEN
	1120	!
	1121	!-- Open an existing netCDF file for output
	1122	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1123	!
	1124	!-- Read header information and set all ids. If there is a mismatch
	1125	!-- between the previuos and the actual run, netcdf_extend is returned
	1126	!-- as .FALSE.
	1127	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1128
	1129	!
	1130	!-- Remove the local file, if it can not be extended
	1131	IF ( .NOT. netcdf_extend ) THEN
	1132	nc_stat = NF90_CLOSE( id_set_fl )
	1133	CALL netcdf_handle_error( 'check_open', 533 )
	1134	CALL local_system( 'rm ' // TRIM( filename ) )
	1135	ENDIF
	1136
	1137	ENDIF
	1138
	1139	IF ( .NOT. netcdf_extend ) THEN
	1140	!
	1141	!-- Create a new netCDF output file with requested netCDF format
	1142	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1143	!
	1144	!-- Define the header
	1145	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1146
	1147	ENDIF
	1148
	1149
[564]	1150	CASE ( 201:200+2*max_masks )
[410]	1151	!
	1152	!-- Set filename depending on unit number
[564]	1153	IF ( file_id <= 200+max_masks ) THEN
	1154	mid = file_id - 200
[410]	1155	WRITE ( mask_char,'(I2.2)') mid
[1779]	1156	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // &
	1157	TRIM( coupling_char )
[410]	1158	av = 0
	1159	ELSE
[564]	1160	mid = file_id - (200+max_masks)
[410]	1161	WRITE ( mask_char,'(I2.2)') mid
[1320]	1162	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
[1779]	1163	TRIM( coupling_char )
[410]	1164	av = 1
	1165	ENDIF
	1166	!
[1031]	1167	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1168	!-- be opened for extension, if its dimensions and variables match the
	1169	!-- actual run.
	1170	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1171
	1172	IF ( netcdf_extend ) THEN
	1173	!
[1031]	1174	!-- Open an existing netCDF file for output
[1783]	1175	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1176	.TRUE., 456 )
[410]	1177	!
	1178	!-- Read header information and set all ids. If there is a mismatch
	1179	!-- between the previuos and the actual run, netcdf_extend is returned
	1180	!-- as .FALSE.
[1783]	1181	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1182
[410]	1183	!
	1184	!-- Remove the local file, if it can not be extended
	1185	IF ( .NOT. netcdf_extend ) THEN
	1186	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1187	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1188	CALL local_system('rm ' // TRIM( filename ) )
	1189	ENDIF
[1]	1190
[410]	1191	ENDIF
	1192
	1193	IF ( .NOT. netcdf_extend ) THEN
[1]	1194	!
[1031]	1195	!-- Create a new netCDF output file with requested netCDF format
[1783]	1196	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1197	!
[410]	1198	!-- Define the header
[1783]	1199	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1200
	1201	ENDIF
	1202
	1203
	1204	#else
	1205
[564]	1206	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1207
	1208	!
[1]	1209	!-- Nothing is done in case of missing netcdf support
	1210	RETURN
	1211
	1212	#endif
	1213
	1214	CASE DEFAULT
	1215
[247]	1216	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1217	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1218
	1219	END SELECT
	1220
	1221	!
	1222	!-- Set open flag
	1223	openfile(file_id)%opened = .TRUE.
	1224
	1225	!
	1226	!-- Formats
[1320]	1227	3300 FORMAT ('#'/ &
	1228	'coord 1 file=',A,' filetype=unformatted'/ &
	1229	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1230	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
[1]	1231	'#')
	1232	4000 FORMAT ('# ',A)
[1320]	1233	5000 FORMAT ('# ',A/ &
	1234	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1235	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1236	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
[1]	1237	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
[1320]	1238	8000 FORMAT (A/ &
[1359]	1239	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1240	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1241	109('-'))
[1]	1242
	1243	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |