Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 2065

Last change on this file since 2065 was 2064, checked in by raasch, 8 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 44.5 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[1036]	3	! This file is part of PALM.
	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[1804]	14	! You should have received a copy of the GNU fGeneral Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[1818]	17	! Copyright 1997-2016 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[2064]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 2064 2016-11-10 17:18:29Z maronga $
	27	!
[2064]	28	! 2063 2016-11-10 17:14:35Z raasch
	29	! bugfix: opening of PROGRESS file moved out of the NetCDF block
	30	!
[2041]	31	! 2040 2016-10-26 16:58:09Z gronemeier
[2040]	32	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
	33	!
[2001]	34	! 2000 2016-08-20 18:09:15Z knoop
	35	! Forced header and separation lines into 80 columns
	36	!
[1989]	37	! 1988 2016-08-10 14:49:06Z gronemeier
	38	! informative message added if files cannot be opened in newly created directory
	39	!
[1987]	40	! 1986 2016-08-10 14:07:17Z gronemeier
	41	! Bugfix: check if output can be opened in newly created directory. If not
	42	! wait one second and try again.
	43	!
[1975]	44	! 1974 2016-07-26 08:43:25Z gronemeier
	45	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	46	! in case of parallel I/O
	47	!
[1958]	48	! 1957 2016-07-07 10:43:48Z suehring
	49	! flight module added
	50	!
[1805]	51	! 1804 2016-04-05 16:30:18Z maronga
	52	! Removed code for parameter file check (__check)
	53	!
[1784]	54	! 1783 2016-03-06 18:36:17Z raasch
	55	! name change of netcdf routines and module + related changes
	56	!
[1780]	57	! 1779 2016-03-03 08:01:28Z raasch
	58	! coupling_char is trimmed at every place it occurs, because it can have
	59	! different length now
	60	!
[1746]	61	! 1745 2016-02-05 13:06:51Z gronemeier
	62	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	63	!
[1683]	64	! 1682 2015-10-07 23:56:08Z knoop
	65	! Code annotations made doxygen readable
	66	!
[1552]	67	! 1551 2015-03-03 14:18:16Z maronga
	68	! Removed redundant output for combine_plot_fields
	69	!
[1469]	70	! 1468 2014-09-24 14:06:57Z maronga
	71	! Adapted for use on up to 6-digit processor cores
	72	! Added file unit 117 (PROGRESS)
	73	!
[1360]	74	! 1359 2014-04-11 17:15:14Z hoffmann
	75	! Format of particle exchange statistics extended to reasonable numbers of
	76	! particles.
	77	!
[1354]	78	! 1353 2014-04-08 15:21:23Z heinze
	79	! REAL constants provided with KIND-attribute,
	80	! declaration for unused variables xkoor, ykoor, zkoor removed
	81	!
[1329]	82	! 1327 2014-03-21 11:00:16Z raasch
	83	! parts concerning iso2d and avs output removed
	84	!
[1321]	85	! 1320 2014-03-20 08:40:49Z raasch
[1320]	86	! ONLY-attribute added to USE-statements,
	87	! kind-parameters added to all INTEGER and REAL declaration statements,
	88	! kinds are defined in new module kinds,
	89	! old module precision_kind is removed,
	90	! revision history before 2012 removed,
	91	! comment fields (!:) to be used for variable explanations added to
	92	! all variable declaration statements
[1]	93	!
[1107]	94	! 1106 2013-03-04 05:31:38Z raasch
	95	! array_kind renamed precision_kind
	96	!
[1093]	97	! 1092 2013-02-02 11:24:22Z raasch
	98	! unused variables removed
	99	!
[1037]	100	! 1036 2012-10-22 13:43:42Z raasch
	101	! code put under GPL (PALM 3.9)
	102	!
[1035]	103	! 1031 2012-10-19 14:35:30Z raasch
	104	! netCDF4 without parallel file support implemented,
	105	! opening of netCDF files are done by new routines create_netcdf_file and
	106	! open_write_netcdf_file
	107	!
[965]	108	! 964 2012-07-26 09:14:24Z raasch
	109	! old profil-units (40:49) removed,
	110	! append feature removed from unit 14
	111	!
[850]	112	! 849 2012-03-15 10:35:09Z raasch
	113	! comment changed
	114	!
[810]	115	! 809 2012-01-30 13:32:58Z maronga
	116	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	117	!
[808]	118	! 807 2012-01-25 11:53:51Z maronga
	119	! New cpp directive "__check" implemented which is used by check_namelist_files
	120	!
[1]	121	! Revision 1.1 1997/08/11 06:10:55 raasch
	122	! Initial revision
	123	!
	124	!
	125	! Description:
	126	! ------------
[1682]	127	!> Check if file unit is open. If not, open file and, if necessary, write a
	128	!> header or start other initializing actions, respectively.
[1]	129	!------------------------------------------------------------------------------!
[1682]	130	SUBROUTINE check_open( file_id )
	131
[1]	132
[1320]	133	USE arrays_3d, &
	134	ONLY: zu
	135
	136	USE control_parameters, &
[1327]	137	ONLY: avs_data_file, coupling_char, data_output_2d_on_each_pe, host, &
[1783]	138	max_masks, message_string, mid, nz_do3d, openfile, &
[1320]	139	return_addres, return_username, run_description_header, runnr
	140
	141	USE grid_variables, &
	142	ONLY: dx, dy
	143
	144	USE indices, &
[1551]	145	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
[1320]	146
	147	USE kinds
	148
[1783]	149	#if defined( __netcdf )
	150	USE NETCDF
	151	#endif
[1320]	152
[1783]	153	USE netcdf_interface, &
[1957]	154	ONLY: id_set_fl, id_set_mask, id_set_pr, id_set_prt, id_set_pts, &
	155	id_set_sp, id_set_ts, id_set_xy, id_set_xz, id_set_yz, &
	156	id_set_3d, nc_stat, netcdf_create_file, netcdf_data_format, &
	157	netcdf_define_header, netcdf_handle_error, netcdf_open_write_file
[1783]	158
[1320]	159	USE particle_attributes, &
	160	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	161	particle_groups
	162
[1]	163	USE pegrid
	164
[1986]	165	USE posix_calls_from_fortran, &
	166	ONLY: fortran_sleep
	167
[1320]	168	USE profil_parameter, &
	169	ONLY: cross_ts_numbers, cross_ts_number_count
	170
	171
[1]	172	IMPLICIT NONE
	173
[1682]	174	CHARACTER (LEN=2) :: mask_char !<
	175	CHARACTER (LEN=2) :: suffix !<
	176	CHARACTER (LEN=20) :: xtext = 'time in s' !<
	177	CHARACTER (LEN=30) :: filename !<
	178	CHARACTER (LEN=40) :: avs_coor_file !<
	179	CHARACTER (LEN=40) :: avs_coor_file_localname !<
	180	CHARACTER (LEN=40) :: avs_data_file_localname !<
	181	CHARACTER (LEN=80) :: rtext !<
	182	CHARACTER (LEN=100) :: avs_coor_file_catalog !<
	183	CHARACTER (LEN=100) :: avs_data_file_catalog !<
	184	CHARACTER (LEN=100) :: batch_scp !<
	185	CHARACTER (LEN=100) :: line !<
	186	CHARACTER (LEN=400) :: command !<
[1]	187
[1682]	188	INTEGER(iwp) :: av !<
	189	INTEGER(iwp) :: numline = 1 !<
	190	INTEGER(iwp) :: cranz !<
	191	INTEGER(iwp) :: file_id !<
	192	INTEGER(iwp) :: i !<
	193	INTEGER(iwp) :: iaddres !<
[1986]	194	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[1682]	195	INTEGER(iwp) :: iusern !<
	196	INTEGER(iwp) :: j !<
	197	INTEGER(iwp) :: k !<
	198	INTEGER(iwp) :: legpos = 1 !<
	199	INTEGER(iwp) :: timodex = 1 !<
[1320]	200
[1682]	201	INTEGER(iwp), DIMENSION(10) :: klist !<
[1]	202
[1682]	203	LOGICAL :: avs_coor_file_found = .FALSE. !<
	204	LOGICAL :: avs_data_file_found = .FALSE. !<
	205	LOGICAL :: datleg = .TRUE. !<
	206	LOGICAL :: get_filenames !<
	207	LOGICAL :: grid = .TRUE. !<
	208	LOGICAL :: netcdf_extend !<
	209	LOGICAL :: rand = .TRUE. !<
	210	LOGICAL :: swap = .TRUE. !<
	211	LOGICAL :: twoxa = .TRUE. !<
	212	LOGICAL :: twoya = .TRUE. !<
[1]	213
[1682]	214	REAL(wp) :: ansx = -999.999_wp !<
	215	REAL(wp) :: ansy = -999.999_wp !<
	216	REAL(wp) :: gwid = 0.1_wp !<
	217	REAL(wp) :: rlegfak = 1.5_wp !<
	218	REAL(wp) :: sizex = 250.0_wp !<
	219	REAL(wp) :: sizey = 40.0_wp !<
	220	REAL(wp) :: texfac = 1.5_wp !<
[1]	221
[1682]	222	REAL(wp), DIMENSION(:), ALLOCATABLE :: eta !<
	223	REAL(wp), DIMENSION(:), ALLOCATABLE :: ho !<
	224	REAL(wp), DIMENSION(:), ALLOCATABLE :: hu !<
[1353]	225
[1]	226
	227
[1320]	228	NAMELIST /RAHMEN/ numline, cranz, datleg, rtext, swap
	229	NAMELIST /CROSS/ ansx, ansy, grid, gwid, klist, legpos, &
	230	rand, rlegfak, sizex, sizey, texfac, &
[1]	231	timodex, twoxa, twoya, xtext
	232
	233
	234	!
	235	!-- Immediate return if file already open
	236	IF ( openfile(file_id)%opened ) RETURN
	237
	238	!
	239	!-- Only certain files are allowed to be re-opened
	240	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	241	!-- has not been checked so far, if it works!
	242	IF ( openfile(file_id)%opened_before ) THEN
	243	SELECT CASE ( file_id )
[1468]	244	CASE ( 13, 14, 21, 22, 23, 80:85, 117 )
[1]	245	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	246	message_string = 're-open of unit ' // &
[274]	247	'14 is not verified. Please check results!'
[247]	248	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	249	ENDIF
[143]	250
[1]	251	CASE DEFAULT
[1320]	252	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	253	' is not allowed'
[247]	254	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	255
[1]	256	RETURN
[143]	257
[1]	258	END SELECT
	259	ENDIF
	260
	261	!
	262	!-- Check if file may be opened on the relevant PE
	263	SELECT CASE ( file_id )
	264
[1468]	265	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109, 117 )
[410]	266
[493]	267	IF ( myid /= 0 ) THEN
[1320]	268	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	269	' not allowed for PE ',myid
	270	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	271	ENDIF
	272
[564]	273	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	274
[1031]	275	IF ( netcdf_data_format < 5 ) THEN
[247]	276
[410]	277	IF ( myid /= 0 ) THEN
[1320]	278	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	279	' not allowed for PE ',myid
	280	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	281	ENDIF
	282
[493]	283	ENDIF
[1]	284
	285	CASE ( 21, 22, 23 )
	286
	287	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	288	IF ( myid /= 0 ) THEN
[1320]	289	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	290	' not allowed for PE ',myid
[277]	291	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	292	END IF
[1]	293	ENDIF
	294
[1327]	295	CASE ( 27, 28, 29, 31, 33, 71:73, 90:99 )
[1]	296
	297	!
	298	!-- File-ids that are used temporarily in other routines
[1320]	299	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	300	' is not allowed since it is used otherwise'
[247]	301	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	302
[1]	303	END SELECT
	304
	305	!
	306	!-- Open relevant files
	307	SELECT CASE ( file_id )
	308
	309	CASE ( 11 )
	310
[1779]	311	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
[102]	312	STATUS='OLD' )
[1]	313
	314	CASE ( 13 )
	315
	316	IF ( myid_char == '' ) THEN
[1779]	317	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	318	FORM='UNFORMATTED', STATUS='OLD' )
[1]	319	ELSE
[143]	320	!
[1468]	321	!-- First opening of unit 13 openes file _000000 on all PEs because
	322	!-- only this file contains the global variables
[143]	323	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	324	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	325	FORM='UNFORMATTED', STATUS='OLD' )
	326	ELSE
[1779]	327	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	328	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	329	ENDIF
[1]	330	ENDIF
	331
	332	CASE ( 14 )
	333
	334	IF ( myid_char == '' ) THEN
[1779]	335	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	336	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	337	ELSE
	338	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	339	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	340	ENDIF
[1804]	341	#if defined( __parallel )
[1]	342	!
	343	!-- Set a barrier in order to allow that all other processors in the
	344	!-- directory created by PE0 can open their file
	345	CALL MPI_BARRIER( comm2d, ierr )
	346	#endif
[1986]	347	ioerr = 1
	348	DO WHILE ( ioerr /= 0 )
	349	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	350	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	351	IF ( ioerr /= 0 ) THEN
	352	WRITE( 9, * ) '*** could not open "BINOUT'// &
	353	TRIM(coupling_char)//'/'//myid_char// &
	354	'"! Trying again in 1 sec.'
	355	CALL fortran_sleep( 1 )
	356	ENDIF
[1986]	357	ENDDO
	358
[1]	359	ENDIF
	360
	361	CASE ( 15 )
	362
[1779]	363	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	364	FORM='FORMATTED' )
[1]	365
	366	CASE ( 16 )
	367
[1779]	368	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	369	FORM='FORMATTED' )
[1]	370
	371	CASE ( 17 )
	372
[1779]	373	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	374	FORM='FORMATTED' )
[1]	375
	376	CASE ( 18 )
	377
[1779]	378	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	379	FORM='FORMATTED' )
[1]	380
	381	CASE ( 19 )
	382
[1779]	383	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	384
	385	CASE ( 20 )
	386
	387	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	388	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	389	ENDIF
	390	IF ( myid_char == '' ) THEN
[1779]	391	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	392	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	393	ELSE
[1804]	394	#if defined( __parallel )
[1]	395	!
	396	!-- Set a barrier in order to allow that all other processors in the
	397	!-- directory created by PE0 can open their file
	398	CALL MPI_BARRIER( comm2d, ierr )
	399	#endif
[1986]	400	ioerr = 1
	401	DO WHILE ( ioerr /= 0 )
	402	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	403	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	404	IOSTAT=ioerr )
[1988]	405	IF ( ioerr /= 0 ) THEN
	406	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	407	TRIM( coupling_char )//'/'//myid_char// &
	408	'"! Trying again in 1 sec.'
	409	CALL fortran_sleep( 1 )
	410	ENDIF
[1986]	411	ENDDO
	412
[1]	413	ENDIF
	414
	415	CASE ( 21 )
	416
	417	IF ( data_output_2d_on_each_pe ) THEN
[1320]	418	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	419	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	420	ELSE
[1779]	421	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	422	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	423	ENDIF
	424
	425	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	426	!
	427	!-- Output for combine_plot_fields
	428	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	429	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	430	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	431	ENDIF
	432	!
	433	!-- Determine and write ISO2D coordiante header
	434	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
[1353]	435	hu = 0.0_wp
[1]	436	ho = (ny+1) * dy
	437	DO i = 1, ny
[1353]	438	eta(i) = REAL( i ) / ( ny + 1.0_wp )
[1]	439	ENDDO
[1353]	440	eta(0) = 0.0_wp
	441	eta(ny+1) = 1.0_wp
[1]	442
	443	WRITE (21) dx,eta,hu,ho
	444	DEALLOCATE( eta, ho, hu )
	445
	446	ENDIF
	447
	448	CASE ( 22 )
	449
	450	IF ( data_output_2d_on_each_pe ) THEN
[1320]	451	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	452	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	453	ELSE
[1779]	454	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	455	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	456	ENDIF
	457
	458	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	459	!
	460	!-- Output for combine_plot_fields
	461	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	462	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	463	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	464	ENDIF
	465	!
[1327]	466	!-- Determine and write ISO2D coordinate header
[1]	467	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
[1353]	468	hu = 0.0_wp
[1]	469	ho = zu(nz+1)
	470	DO i = 1, nz
	471	eta(i) = REAL( zu(i) ) / zu(nz+1)
	472	ENDDO
[1353]	473	eta(0) = 0.0_wp
	474	eta(nz+1) = 1.0_wp
[1]	475
	476	WRITE (22) dx,eta,hu,ho
	477	DEALLOCATE( eta, ho, hu )
	478
	479	ENDIF
	480
	481	CASE ( 23 )
	482
	483	IF ( data_output_2d_on_each_pe ) THEN
[1320]	484	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	485	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	486	ELSE
[1779]	487	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	488	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	489	ENDIF
	490
	491	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	492	!
	493	!-- Output for combine_plot_fields
	494	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	495	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	496	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	497	ENDIF
	498	!
	499	!-- Determine and write ISO2D coordiante header
	500	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
[1353]	501	hu = 0.0_wp
[1]	502	ho = zu(nz+1)
	503	DO i = 1, nz
	504	eta(i) = REAL( zu(i) ) / zu(nz+1)
	505	ENDDO
[1353]	506	eta(0) = 0.0_wp
	507	eta(nz+1) = 1.0_wp
[1]	508
	509	WRITE (23) dx,eta,hu,ho
	510	DEALLOCATE( eta, ho, hu )
	511
	512	ENDIF
	513
	514	CASE ( 30 )
	515
[1320]	516	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	517	FORM='UNFORMATTED' )
[1]	518	!
	519	!-- Write coordinate file for AVS
	520	IF ( myid == 0 ) THEN
	521	#if defined( __parallel )
	522	!
	523	!-- Specifications for combine_plot_fields
[1551]	524	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp
[1327]	525	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
[1]	526	#endif
	527	ENDIF
	528
	529	CASE ( 80 )
	530
	531	IF ( myid_char == '' ) THEN
[105]	532	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	533	FORM='FORMATTED', POSITION='APPEND' )
[1]	534	ELSE
	535	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	536	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	537	TRIM( coupling_char ) )
[1]	538	ENDIF
[1804]	539	#if defined( __parallel )
[1]	540	!
	541	!-- Set a barrier in order to allow that thereafter all other
	542	!-- processors in the directory created by PE0 can open their file.
	543	!-- WARNING: The following barrier will lead to hanging jobs, if
	544	!-- check_open is first called from routine
	545	!-- allocate_prt_memory!
	546	IF ( .NOT. openfile(80)%opened_before ) THEN
	547	CALL MPI_BARRIER( comm2d, ierr )
	548	ENDIF
	549	#endif
[1320]	550	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	551	myid_char, &
[102]	552	FORM='FORMATTED', POSITION='APPEND' )
[1]	553	ENDIF
	554
	555	IF ( .NOT. openfile(80)%opened_before ) THEN
	556	WRITE ( 80, 8000 ) TRIM( run_description_header )
	557	ENDIF
	558
	559	CASE ( 81 )
	560
[1779]	561	OPEN ( 81, FILE='PLOTSP_X_PAR'//TRIM( coupling_char ), &
	562	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
	563	POSITION='APPEND' )
[1]	564
	565	CASE ( 82 )
	566
[1779]	567	OPEN ( 82, FILE='PLOTSP_X_DATA'//TRIM( coupling_char ), &
	568	FORM='FORMATTED', POSITION = 'APPEND' )
[1]	569
	570	CASE ( 83 )
	571
[1779]	572	OPEN ( 83, FILE='PLOTSP_Y_PAR'//TRIM( coupling_char ), &
	573	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
	574	POSITION='APPEND' )
[1]	575
	576	CASE ( 84 )
	577
[1779]	578	OPEN ( 84, FILE='PLOTSP_Y_DATA'//TRIM( coupling_char ), &
	579	FORM='FORMATTED', POSITION='APPEND' )
[1]	580
	581	CASE ( 85 )
	582
	583	IF ( myid_char == '' ) THEN
[1320]	584	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	585	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	586	ELSE
	587	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	588	CALL local_system( 'mkdir PARTICLE_DATA' // &
	589	TRIM( coupling_char ) )
[1]	590	ENDIF
[1804]	591	#if defined( __parallel )
[1]	592	!
	593	!-- Set a barrier in order to allow that thereafter all other
	594	!-- processors in the directory created by PE0 can open their file
	595	CALL MPI_BARRIER( comm2d, ierr )
	596	#endif
[1986]	597	ioerr = 1
	598	DO WHILE ( ioerr /= 0 )
	599	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	600	myid_char, &
	601	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	602	IF ( ioerr /= 0 ) THEN
	603	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	604	TRIM( coupling_char )//'/'//myid_char// &
	605	'"! Trying again in 1 sec.'
	606	CALL fortran_sleep( 1 )
	607	ENDIF
[1986]	608	ENDDO
	609
[1]	610	ENDIF
	611
	612	IF ( .NOT. openfile(85)%opened_before ) THEN
	613	WRITE ( 85 ) run_description_header
	614	!
	615	!-- Attention: change version number whenever the output format on
[849]	616	!-- unit 85 is changed (see also in routine
	617	!-- lpm_data_output_particles)
[1359]	618	rtext = 'data format version 3.1'
[1]	619	WRITE ( 85 ) rtext
[1320]	620	WRITE ( 85 ) number_of_particle_groups, &
[1]	621	max_number_of_particle_groups
	622	WRITE ( 85 ) particle_groups
[1359]	623	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	624	ENDIF
	625
[2063]	626	!
	627	!-- Progress file that is used by the PALM watchdog
	628	CASE ( 117 )
	629
	630	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	631	STATUS='REPLACE', FORM='FORMATTED' )
	632
[1]	633	#if defined( __netcdf )
	634	CASE ( 101, 111 )
	635	!
	636	!-- Set filename depending on unit number
	637	IF ( file_id == 101 ) THEN
[1779]	638	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	639	av = 0
	640	ELSE
[1779]	641	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	642	av = 1
	643	ENDIF
	644	!
[1031]	645	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	646	!-- be opened for extension, if its dimensions and variables match the
	647	!-- actual run.
	648	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	649	IF ( netcdf_extend ) THEN
	650	!
[1031]	651	!-- Open an existing netCDF file for output
[1783]	652	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	653	!
	654	!-- Read header information and set all ids. If there is a mismatch
	655	!-- between the previuos and the actual run, netcdf_extend is returned
	656	!-- as .FALSE.
[1783]	657	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	658
	659	!
	660	!-- Remove the local file, if it can not be extended
	661	IF ( .NOT. netcdf_extend ) THEN
	662	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	663	CALL netcdf_handle_error( 'check_open', 21 )
[493]	664	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	665	#if defined( __parallel )
[1745]	666	!
	667	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	668	!-- before any other processor tries to open a new file.
	669	!-- Barrier is only needed in case of parallel I/O
	670	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	671	#endif
[1]	672	ENDIF
	673
[1745]	674	ENDIF
[1]	675
	676	IF ( .NOT. netcdf_extend ) THEN
	677	!
[1031]	678	!-- Create a new netCDF output file with requested netCDF format
[1783]	679	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	680
	681	!
[1]	682	!-- Define the header
[1783]	683	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	684
[493]	685	!
[1031]	686	!-- In case of parallel netCDF output, create flag file which tells
[493]	687	!-- combine_plot_fields that nothing is to do.
[1031]	688	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	689	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	690	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	691	CLOSE( 99 )
	692	ENDIF
	693
[1]	694	ENDIF
	695
	696	CASE ( 102, 112 )
	697	!
	698	!-- Set filename depending on unit number
	699	IF ( file_id == 102 ) THEN
[1779]	700	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	701	av = 0
	702	ELSE
[1779]	703	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	704	av = 1
	705	ENDIF
	706	!
[1031]	707	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	708	!-- be opened for extension, if its dimensions and variables match the
	709	!-- actual run.
	710	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	711
	712	IF ( netcdf_extend ) THEN
	713	!
[1031]	714	!-- Open an existing netCDF file for output
[1783]	715	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	716	!
	717	!-- Read header information and set all ids. If there is a mismatch
	718	!-- between the previuos and the actual run, netcdf_extend is returned
	719	!-- as .FALSE.
[1783]	720	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	721
	722	!
	723	!-- Remove the local file, if it can not be extended
	724	IF ( .NOT. netcdf_extend ) THEN
	725	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	726	CALL netcdf_handle_error( 'check_open', 24 )
[493]	727	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	728	#if defined( __parallel )
[1745]	729	!
	730	!-- Set a barrier in order to assure that PE0 deleted the old file
	731	!-- before any other processor tries to open a new file
[1974]	732	!-- Barrier is only needed in case of parallel I/O
	733	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	734	#endif
[1]	735	ENDIF
	736
[1745]	737	ENDIF
[1]	738
	739	IF ( .NOT. netcdf_extend ) THEN
	740	!
[1031]	741	!-- Create a new netCDF output file with requested netCDF format
[1783]	742	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	743
	744	!
[1]	745	!-- Define the header
[1783]	746	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	747
[493]	748	!
[1031]	749	!-- In case of parallel netCDF output, create flag file which tells
[493]	750	!-- combine_plot_fields that nothing is to do.
[1031]	751	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	752	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	753	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	754	CLOSE( 99 )
	755	ENDIF
	756
[1]	757	ENDIF
	758
	759	CASE ( 103, 113 )
	760	!
	761	!-- Set filename depending on unit number
	762	IF ( file_id == 103 ) THEN
[1779]	763	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	764	av = 0
	765	ELSE
[1779]	766	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	767	av = 1
	768	ENDIF
	769	!
[1031]	770	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	771	!-- be opened for extension, if its dimensions and variables match the
	772	!-- actual run.
	773	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	774
	775	IF ( netcdf_extend ) THEN
	776	!
[1031]	777	!-- Open an existing netCDF file for output
[1783]	778	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	779	!
	780	!-- Read header information and set all ids. If there is a mismatch
	781	!-- between the previuos and the actual run, netcdf_extend is returned
	782	!-- as .FALSE.
[1783]	783	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	784
	785	!
	786	!-- Remove the local file, if it can not be extended
	787	IF ( .NOT. netcdf_extend ) THEN
	788	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	789	CALL netcdf_handle_error( 'check_open', 27 )
[493]	790	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	791	#if defined( __parallel )
[1745]	792	!
	793	!-- Set a barrier in order to assure that PE0 deleted the old file
	794	!-- before any other processor tries to open a new file
[1974]	795	!-- Barrier is only needed in case of parallel I/O
	796	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	797	#endif
[1]	798	ENDIF
	799
[1745]	800	ENDIF
[1]	801
	802	IF ( .NOT. netcdf_extend ) THEN
	803	!
[1031]	804	!-- Create a new netCDF output file with requested netCDF format
[1783]	805	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	806
	807	!
[1]	808	!-- Define the header
[1783]	809	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	810
[493]	811	!
[1031]	812	!-- In case of parallel netCDF output, create flag file which tells
[493]	813	!-- combine_plot_fields that nothing is to do.
[1031]	814	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	815	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	816	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	817	CLOSE( 99 )
	818	ENDIF
	819
[1]	820	ENDIF
	821
	822	CASE ( 104 )
	823	!
[102]	824	!-- Set filename
[1779]	825	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	826
	827	!
[1031]	828	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	829	!-- be opened for extension, if its variables match the actual run.
[102]	830	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	831
	832	IF ( netcdf_extend ) THEN
	833	!
[1031]	834	!-- Open an existing netCDF file for output
[1783]	835	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	836	!
	837	!-- Read header information and set all ids. If there is a mismatch
	838	!-- between the previuos and the actual run, netcdf_extend is returned
	839	!-- as .FALSE.
[1783]	840	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	841
	842	!
	843	!-- Remove the local file, if it can not be extended
	844	IF ( .NOT. netcdf_extend ) THEN
	845	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	846	CALL netcdf_handle_error( 'check_open', 30 )
[102]	847	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	848	ENDIF
	849
	850	ENDIF
	851
	852	IF ( .NOT. netcdf_extend ) THEN
	853	!
[1031]	854	!-- Create a new netCDF output file with requested netCDF format
[1783]	855	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	856	!
	857	!-- Define the header
[1783]	858	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	859
	860	ENDIF
	861
	862	CASE ( 105 )
	863	!
[102]	864	!-- Set filename
[1779]	865	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	866
	867	!
[1031]	868	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	869	!-- be opened for extension, if its variables match the actual run.
[102]	870	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	871
	872	IF ( netcdf_extend ) THEN
	873	!
[1031]	874	!-- Open an existing netCDF file for output
[1783]	875	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	876	!
	877	!-- Read header information and set all ids. If there is a mismatch
	878	!-- between the previuos and the actual run, netcdf_extend is returned
	879	!-- as .FALSE.
[1783]	880	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	881
	882	!
	883	!-- Remove the local file, if it can not be extended
	884	IF ( .NOT. netcdf_extend ) THEN
	885	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	886	CALL netcdf_handle_error( 'check_open', 33 )
[102]	887	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	888	ENDIF
	889
	890	ENDIF
	891
	892	IF ( .NOT. netcdf_extend ) THEN
	893	!
[1031]	894	!-- Create a new netCDF output file with requested netCDF format
[1783]	895	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	896	!
	897	!-- Define the header
[1783]	898	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	899
	900	ENDIF
	901
	902
	903	CASE ( 106, 116 )
	904	!
	905	!-- Set filename depending on unit number
	906	IF ( file_id == 106 ) THEN
[1779]	907	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	908	av = 0
	909	ELSE
[1779]	910	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	911	av = 1
	912	ENDIF
	913	!
[1031]	914	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	915	!-- be opened for extension, if its dimensions and variables match the
	916	!-- actual run.
	917	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	918
	919	IF ( netcdf_extend ) THEN
	920	!
[1031]	921	!-- Open an existing netCDF file for output
[1783]	922	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	923	!
	924	!-- Read header information and set all ids. If there is a mismatch
	925	!-- between the previuos and the actual run, netcdf_extend is returned
	926	!-- as .FALSE.
[1783]	927	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	928
	929	!
	930	!-- Remove the local file, if it can not be extended
	931	IF ( .NOT. netcdf_extend ) THEN
	932	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	933	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	934	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	935	#if defined( __parallel )
[1745]	936	!
	937	!-- Set a barrier in order to assure that PE0 deleted the old file
	938	!-- before any other processor tries to open a new file
[1974]	939	!-- Barrier is only needed in case of parallel I/O
	940	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	941	#endif
[1]	942	ENDIF
	943
[1745]	944	ENDIF
[1]	945
	946	IF ( .NOT. netcdf_extend ) THEN
	947	!
[1031]	948	!-- Create a new netCDF output file with requested netCDF format
[1783]	949	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	950
	951	!
[1]	952	!-- Define the header
[1783]	953	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	954
[493]	955	!
[1031]	956	!-- In case of parallel netCDF output, create flag file which tells
[493]	957	!-- combine_plot_fields that nothing is to do.
[1031]	958	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	959	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	960	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	961	CLOSE( 99 )
	962	ENDIF
	963
[1]	964	ENDIF
	965
	966
	967	CASE ( 107 )
	968	!
[102]	969	!-- Set filename
[1779]	970	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	971
	972	!
[1031]	973	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	974	!-- be opened for extension, if its variables match the actual run.
[102]	975	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	976
	977	IF ( netcdf_extend ) THEN
	978	!
[1031]	979	!-- Open an existing netCDF file for output
[1783]	980	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	981
[1]	982	!
	983	!-- Read header information and set all ids. If there is a mismatch
	984	!-- between the previuos and the actual run, netcdf_extend is returned
	985	!-- as .FALSE.
[1783]	986	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	987
	988	!
	989	!-- Remove the local file, if it can not be extended
	990	IF ( .NOT. netcdf_extend ) THEN
	991	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	992	CALL netcdf_handle_error( 'check_open', 39 )
[102]	993	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	994	ENDIF
	995
	996	ENDIF
	997
	998	IF ( .NOT. netcdf_extend ) THEN
	999	!
[1031]	1000	!-- Create a new netCDF output file with requested netCDF format
[1783]	1001	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	1002	!
	1003	!-- Define the header
[1783]	1004	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1005
	1006	ENDIF
	1007
	1008
	1009	CASE ( 108 )
	1010
	1011	IF ( myid_char == '' ) THEN
[1779]	1012	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
[1]	1013	ELSE
[1320]	1014	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
[105]	1015	myid_char
[1]	1016	ENDIF
	1017	!
[1031]	1018	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1019	!-- be opened for extension, if its variables match the actual run.
	1020	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1021
	1022	IF ( netcdf_extend ) THEN
	1023	!
[1031]	1024	!-- Open an existing netCDF file for output
[1783]	1025	CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	1026	!
	1027	!-- Read header information and set all ids. If there is a mismatch
	1028	!-- between the previuos and the actual run, netcdf_extend is returned
	1029	!-- as .FALSE.
[1783]	1030	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1031
	1032	!
	1033	!-- Remove the local file, if it can not be extended
	1034	IF ( .NOT. netcdf_extend ) THEN
	1035	nc_stat = NF90_CLOSE( id_set_prt )
[1783]	1036	CALL netcdf_handle_error( 'check_open', 42 )
[1745]	1037	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1038	ENDIF
	1039
	1040	ENDIF
	1041
	1042	IF ( .NOT. netcdf_extend ) THEN
	1043
	1044	!
	1045	!-- For runs on multiple processors create the subdirectory
	1046	IF ( myid_char /= '' ) THEN
[1320]	1047	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
[1]	1048	THEN ! needs modification in case of non-extendable sets
[1320]	1049	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1050	TRIM( coupling_char ) // '/' )
[1]	1051	ENDIF
[1804]	1052	#if defined( __parallel )
[807]	1053	!
[1]	1054	!-- Set a barrier in order to allow that all other processors in the
	1055	!-- directory created by PE0 can open their file
	1056	CALL MPI_BARRIER( comm2d, ierr )
	1057	#endif
	1058	ENDIF
	1059
	1060	!
[1031]	1061	!-- Create a new netCDF output file with requested netCDF format
[1783]	1062	CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1063
	1064	!
[1]	1065	!-- Define the header
[1783]	1066	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1067
	1068	ENDIF
	1069
	1070	CASE ( 109 )
	1071	!
[102]	1072	!-- Set filename
[1779]	1073	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1074
	1075	!
[1031]	1076	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1077	!-- be opened for extension, if its variables match the actual run.
[102]	1078	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1079
	1080	IF ( netcdf_extend ) THEN
	1081	!
[1031]	1082	!-- Open an existing netCDF file for output
[1783]	1083	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1084	!
	1085	!-- Read header information and set all ids. If there is a mismatch
	1086	!-- between the previuos and the actual run, netcdf_extend is returned
	1087	!-- as .FALSE.
[1783]	1088	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1089
	1090	!
	1091	!-- Remove the local file, if it can not be extended
	1092	IF ( .NOT. netcdf_extend ) THEN
	1093	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1094	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1095	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1096	ENDIF
	1097
	1098	ENDIF
	1099
	1100	IF ( .NOT. netcdf_extend ) THEN
	1101	!
[1031]	1102	!-- Create a new netCDF output file with requested netCDF format
[1783]	1103	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1104	!
	1105	!-- Define the header
[1783]	1106	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1107
	1108	ENDIF
[410]	1109
[1468]	1110	!
[1957]	1111	!-- nc-file for virtual flight measurements
	1112	CASE ( 199 )
	1113	!
	1114	!-- Set filename
	1115	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1116
[1957]	1117	!
	1118	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1119	!-- be opened for extension, if its variables match the actual run.
	1120	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1121
[1957]	1122	IF ( netcdf_extend ) THEN
	1123	!
	1124	!-- Open an existing netCDF file for output
	1125	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1126	!
	1127	!-- Read header information and set all ids. If there is a mismatch
	1128	!-- between the previuos and the actual run, netcdf_extend is returned
	1129	!-- as .FALSE.
	1130	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1131
	1132	!
	1133	!-- Remove the local file, if it can not be extended
	1134	IF ( .NOT. netcdf_extend ) THEN
	1135	nc_stat = NF90_CLOSE( id_set_fl )
	1136	CALL netcdf_handle_error( 'check_open', 533 )
	1137	CALL local_system( 'rm ' // TRIM( filename ) )
	1138	ENDIF
	1139
	1140	ENDIF
	1141
	1142	IF ( .NOT. netcdf_extend ) THEN
	1143	!
	1144	!-- Create a new netCDF output file with requested netCDF format
	1145	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1146	!
	1147	!-- Define the header
	1148	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1149
	1150	ENDIF
	1151
	1152
[564]	1153	CASE ( 201:200+2*max_masks )
[410]	1154	!
	1155	!-- Set filename depending on unit number
[564]	1156	IF ( file_id <= 200+max_masks ) THEN
	1157	mid = file_id - 200
[410]	1158	WRITE ( mask_char,'(I2.2)') mid
[1779]	1159	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // &
	1160	TRIM( coupling_char )
[410]	1161	av = 0
	1162	ELSE
[564]	1163	mid = file_id - (200+max_masks)
[410]	1164	WRITE ( mask_char,'(I2.2)') mid
[1320]	1165	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
[1779]	1166	TRIM( coupling_char )
[410]	1167	av = 1
	1168	ENDIF
	1169	!
[1031]	1170	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1171	!-- be opened for extension, if its dimensions and variables match the
	1172	!-- actual run.
	1173	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1174
	1175	IF ( netcdf_extend ) THEN
	1176	!
[1031]	1177	!-- Open an existing netCDF file for output
[1783]	1178	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1179	.TRUE., 456 )
[410]	1180	!
	1181	!-- Read header information and set all ids. If there is a mismatch
	1182	!-- between the previuos and the actual run, netcdf_extend is returned
	1183	!-- as .FALSE.
[1783]	1184	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1185
[410]	1186	!
	1187	!-- Remove the local file, if it can not be extended
	1188	IF ( .NOT. netcdf_extend ) THEN
	1189	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1190	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1191	CALL local_system('rm ' // TRIM( filename ) )
	1192	ENDIF
[1]	1193
[410]	1194	ENDIF
	1195
	1196	IF ( .NOT. netcdf_extend ) THEN
[1]	1197	!
[1031]	1198	!-- Create a new netCDF output file with requested netCDF format
[1783]	1199	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1200	!
[410]	1201	!-- Define the header
[1783]	1202	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1203
	1204	ENDIF
	1205
	1206
	1207	#else
	1208
[564]	1209	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1210
	1211	!
[1]	1212	!-- Nothing is done in case of missing netcdf support
	1213	RETURN
	1214
	1215	#endif
	1216
	1217	CASE DEFAULT
	1218
[247]	1219	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1220	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1221
	1222	END SELECT
	1223
	1224	!
	1225	!-- Set open flag
	1226	openfile(file_id)%opened = .TRUE.
	1227
	1228	!
	1229	!-- Formats
[1320]	1230	3300 FORMAT ('#'/ &
	1231	'coord 1 file=',A,' filetype=unformatted'/ &
	1232	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1233	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
[1]	1234	'#')
	1235	4000 FORMAT ('# ',A)
[1320]	1236	5000 FORMAT ('# ',A/ &
	1237	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1238	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1239	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
[1]	1240	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
[1320]	1241	8000 FORMAT (A/ &
[1359]	1242	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1243	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1244	109('-'))
[1]	1245
	1246	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |