Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 2039

Last change on this file since 2039 was 2039, checked in by gronemeier, 8 years ago
Increased the number of possible statistic regions to 99
Property svn:keywords set to `Id`
File size: 44.3 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[1036]	3	! This file is part of PALM.
	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[1804]	14	! You should have received a copy of the GNU fGeneral Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[1818]	17	! Copyright 1997-2016 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[2039]	22	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
[1805]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 2039 2016-10-26 16:53:23Z gronemeier $
	27	!
[2001]	28	! 2000 2016-08-20 18:09:15Z knoop
	29	! Forced header and separation lines into 80 columns
	30	!
[1989]	31	! 1988 2016-08-10 14:49:06Z gronemeier
	32	! informative message added if files cannot be opened in newly created directory
	33	!
[1987]	34	! 1986 2016-08-10 14:07:17Z gronemeier
	35	! Bugfix: check if output can be opened in newly created directory. If not
	36	! wait one second and try again.
	37	!
[1975]	38	! 1974 2016-07-26 08:43:25Z gronemeier
	39	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	40	! in case of parallel I/O
	41	!
[1958]	42	! 1957 2016-07-07 10:43:48Z suehring
	43	! flight module added
	44	!
[1805]	45	! 1804 2016-04-05 16:30:18Z maronga
	46	! Removed code for parameter file check (__check)
	47	!
[1784]	48	! 1783 2016-03-06 18:36:17Z raasch
	49	! name change of netcdf routines and module + related changes
	50	!
[1780]	51	! 1779 2016-03-03 08:01:28Z raasch
	52	! coupling_char is trimmed at every place it occurs, because it can have
	53	! different length now
	54	!
[1746]	55	! 1745 2016-02-05 13:06:51Z gronemeier
	56	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	57	!
[1683]	58	! 1682 2015-10-07 23:56:08Z knoop
	59	! Code annotations made doxygen readable
	60	!
[1552]	61	! 1551 2015-03-03 14:18:16Z maronga
	62	! Removed redundant output for combine_plot_fields
	63	!
[1469]	64	! 1468 2014-09-24 14:06:57Z maronga
	65	! Adapted for use on up to 6-digit processor cores
	66	! Added file unit 117 (PROGRESS)
	67	!
[1360]	68	! 1359 2014-04-11 17:15:14Z hoffmann
	69	! Format of particle exchange statistics extended to reasonable numbers of
	70	! particles.
	71	!
[1354]	72	! 1353 2014-04-08 15:21:23Z heinze
	73	! REAL constants provided with KIND-attribute,
	74	! declaration for unused variables xkoor, ykoor, zkoor removed
	75	!
[1329]	76	! 1327 2014-03-21 11:00:16Z raasch
	77	! parts concerning iso2d and avs output removed
	78	!
[1321]	79	! 1320 2014-03-20 08:40:49Z raasch
[1320]	80	! ONLY-attribute added to USE-statements,
	81	! kind-parameters added to all INTEGER and REAL declaration statements,
	82	! kinds are defined in new module kinds,
	83	! old module precision_kind is removed,
	84	! revision history before 2012 removed,
	85	! comment fields (!:) to be used for variable explanations added to
	86	! all variable declaration statements
[1]	87	!
[1107]	88	! 1106 2013-03-04 05:31:38Z raasch
	89	! array_kind renamed precision_kind
	90	!
[1093]	91	! 1092 2013-02-02 11:24:22Z raasch
	92	! unused variables removed
	93	!
[1037]	94	! 1036 2012-10-22 13:43:42Z raasch
	95	! code put under GPL (PALM 3.9)
	96	!
[1035]	97	! 1031 2012-10-19 14:35:30Z raasch
	98	! netCDF4 without parallel file support implemented,
	99	! opening of netCDF files are done by new routines create_netcdf_file and
	100	! open_write_netcdf_file
	101	!
[965]	102	! 964 2012-07-26 09:14:24Z raasch
	103	! old profil-units (40:49) removed,
	104	! append feature removed from unit 14
	105	!
[850]	106	! 849 2012-03-15 10:35:09Z raasch
	107	! comment changed
	108	!
[810]	109	! 809 2012-01-30 13:32:58Z maronga
	110	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	111	!
[808]	112	! 807 2012-01-25 11:53:51Z maronga
	113	! New cpp directive "__check" implemented which is used by check_namelist_files
	114	!
[1]	115	! Revision 1.1 1997/08/11 06:10:55 raasch
	116	! Initial revision
	117	!
	118	!
	119	! Description:
	120	! ------------
[1682]	121	!> Check if file unit is open. If not, open file and, if necessary, write a
	122	!> header or start other initializing actions, respectively.
[1]	123	!------------------------------------------------------------------------------!
[1682]	124	SUBROUTINE check_open( file_id )
	125
[1]	126
[1320]	127	USE arrays_3d, &
	128	ONLY: zu
	129
	130	USE control_parameters, &
[1327]	131	ONLY: avs_data_file, coupling_char, data_output_2d_on_each_pe, host, &
[1783]	132	max_masks, message_string, mid, nz_do3d, openfile, &
[1320]	133	return_addres, return_username, run_description_header, runnr
	134
	135	USE grid_variables, &
	136	ONLY: dx, dy
	137
	138	USE indices, &
[1551]	139	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
[1320]	140
	141	USE kinds
	142
[1783]	143	#if defined( __netcdf )
	144	USE NETCDF
	145	#endif
[1320]	146
[1783]	147	USE netcdf_interface, &
[1957]	148	ONLY: id_set_fl, id_set_mask, id_set_pr, id_set_prt, id_set_pts, &
	149	id_set_sp, id_set_ts, id_set_xy, id_set_xz, id_set_yz, &
	150	id_set_3d, nc_stat, netcdf_create_file, netcdf_data_format, &
	151	netcdf_define_header, netcdf_handle_error, netcdf_open_write_file
[1783]	152
[1320]	153	USE particle_attributes, &
	154	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	155	particle_groups
	156
[1]	157	USE pegrid
	158
[1986]	159	USE posix_calls_from_fortran, &
	160	ONLY: fortran_sleep
	161
[1320]	162	USE profil_parameter, &
	163	ONLY: cross_ts_numbers, cross_ts_number_count
	164
	165
[1]	166	IMPLICIT NONE
	167
[1682]	168	CHARACTER (LEN=2) :: mask_char !<
	169	CHARACTER (LEN=2) :: suffix !<
	170	CHARACTER (LEN=20) :: xtext = 'time in s' !<
	171	CHARACTER (LEN=30) :: filename !<
	172	CHARACTER (LEN=40) :: avs_coor_file !<
	173	CHARACTER (LEN=40) :: avs_coor_file_localname !<
	174	CHARACTER (LEN=40) :: avs_data_file_localname !<
	175	CHARACTER (LEN=80) :: rtext !<
	176	CHARACTER (LEN=100) :: avs_coor_file_catalog !<
	177	CHARACTER (LEN=100) :: avs_data_file_catalog !<
	178	CHARACTER (LEN=100) :: batch_scp !<
	179	CHARACTER (LEN=100) :: line !<
	180	CHARACTER (LEN=400) :: command !<
[1]	181
[1682]	182	INTEGER(iwp) :: av !<
	183	INTEGER(iwp) :: numline = 1 !<
	184	INTEGER(iwp) :: cranz !<
	185	INTEGER(iwp) :: file_id !<
	186	INTEGER(iwp) :: i !<
	187	INTEGER(iwp) :: iaddres !<
[1986]	188	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[1682]	189	INTEGER(iwp) :: iusern !<
	190	INTEGER(iwp) :: j !<
	191	INTEGER(iwp) :: k !<
	192	INTEGER(iwp) :: legpos = 1 !<
	193	INTEGER(iwp) :: timodex = 1 !<
[1320]	194
[1682]	195	INTEGER(iwp), DIMENSION(10) :: klist !<
[1]	196
[1682]	197	LOGICAL :: avs_coor_file_found = .FALSE. !<
	198	LOGICAL :: avs_data_file_found = .FALSE. !<
	199	LOGICAL :: datleg = .TRUE. !<
	200	LOGICAL :: get_filenames !<
	201	LOGICAL :: grid = .TRUE. !<
	202	LOGICAL :: netcdf_extend !<
	203	LOGICAL :: rand = .TRUE. !<
	204	LOGICAL :: swap = .TRUE. !<
	205	LOGICAL :: twoxa = .TRUE. !<
	206	LOGICAL :: twoya = .TRUE. !<
[1]	207
[1682]	208	REAL(wp) :: ansx = -999.999_wp !<
	209	REAL(wp) :: ansy = -999.999_wp !<
	210	REAL(wp) :: gwid = 0.1_wp !<
	211	REAL(wp) :: rlegfak = 1.5_wp !<
	212	REAL(wp) :: sizex = 250.0_wp !<
	213	REAL(wp) :: sizey = 40.0_wp !<
	214	REAL(wp) :: texfac = 1.5_wp !<
[1]	215
[1682]	216	REAL(wp), DIMENSION(:), ALLOCATABLE :: eta !<
	217	REAL(wp), DIMENSION(:), ALLOCATABLE :: ho !<
	218	REAL(wp), DIMENSION(:), ALLOCATABLE :: hu !<
[1353]	219
[1]	220
	221
[1320]	222	NAMELIST /RAHMEN/ numline, cranz, datleg, rtext, swap
	223	NAMELIST /CROSS/ ansx, ansy, grid, gwid, klist, legpos, &
	224	rand, rlegfak, sizex, sizey, texfac, &
[1]	225	timodex, twoxa, twoya, xtext
	226
	227
	228	!
	229	!-- Immediate return if file already open
	230	IF ( openfile(file_id)%opened ) RETURN
	231
	232	!
	233	!-- Only certain files are allowed to be re-opened
	234	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	235	!-- has not been checked so far, if it works!
	236	IF ( openfile(file_id)%opened_before ) THEN
	237	SELECT CASE ( file_id )
[1468]	238	CASE ( 13, 14, 21, 22, 23, 80:85, 117 )
[1]	239	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	240	message_string = 're-open of unit ' // &
[274]	241	'14 is not verified. Please check results!'
[247]	242	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	243	ENDIF
[143]	244
[1]	245	CASE DEFAULT
[1320]	246	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	247	' is not allowed'
[247]	248	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	249
[1]	250	RETURN
[143]	251
[1]	252	END SELECT
	253	ENDIF
	254
	255	!
	256	!-- Check if file may be opened on the relevant PE
	257	SELECT CASE ( file_id )
	258
[1468]	259	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109, 117 )
[410]	260
[493]	261	IF ( myid /= 0 ) THEN
[1320]	262	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	263	' not allowed for PE ',myid
	264	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	265	ENDIF
	266
[564]	267	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	268
[1031]	269	IF ( netcdf_data_format < 5 ) THEN
[247]	270
[410]	271	IF ( myid /= 0 ) THEN
[1320]	272	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	273	' not allowed for PE ',myid
	274	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	275	ENDIF
	276
[493]	277	ENDIF
[1]	278
	279	CASE ( 21, 22, 23 )
	280
	281	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	282	IF ( myid /= 0 ) THEN
[1320]	283	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	284	' not allowed for PE ',myid
[277]	285	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	286	END IF
[1]	287	ENDIF
	288
[1327]	289	CASE ( 27, 28, 29, 31, 33, 71:73, 90:99 )
[1]	290
	291	!
	292	!-- File-ids that are used temporarily in other routines
[1320]	293	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	294	' is not allowed since it is used otherwise'
[247]	295	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	296
[1]	297	END SELECT
	298
	299	!
	300	!-- Open relevant files
	301	SELECT CASE ( file_id )
	302
	303	CASE ( 11 )
	304
[1779]	305	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
[102]	306	STATUS='OLD' )
[1]	307
	308	CASE ( 13 )
	309
	310	IF ( myid_char == '' ) THEN
[1779]	311	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	312	FORM='UNFORMATTED', STATUS='OLD' )
[1]	313	ELSE
[143]	314	!
[1468]	315	!-- First opening of unit 13 openes file _000000 on all PEs because
	316	!-- only this file contains the global variables
[143]	317	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	318	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	319	FORM='UNFORMATTED', STATUS='OLD' )
	320	ELSE
[1779]	321	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	322	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	323	ENDIF
[1]	324	ENDIF
	325
	326	CASE ( 14 )
	327
	328	IF ( myid_char == '' ) THEN
[1779]	329	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	330	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	331	ELSE
	332	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	333	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	334	ENDIF
[1804]	335	#if defined( __parallel )
[1]	336	!
	337	!-- Set a barrier in order to allow that all other processors in the
	338	!-- directory created by PE0 can open their file
	339	CALL MPI_BARRIER( comm2d, ierr )
	340	#endif
[1986]	341	ioerr = 1
	342	DO WHILE ( ioerr /= 0 )
	343	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	344	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	345	IF ( ioerr /= 0 ) THEN
	346	WRITE( 9, * ) '*** could not open "BINOUT'// &
	347	TRIM(coupling_char)//'/'//myid_char// &
	348	'"! Trying again in 1 sec.'
	349	CALL fortran_sleep( 1 )
	350	ENDIF
[1986]	351	ENDDO
	352
[1]	353	ENDIF
	354
	355	CASE ( 15 )
	356
[1779]	357	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	358	FORM='FORMATTED' )
[1]	359
	360	CASE ( 16 )
	361
[1779]	362	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	363	FORM='FORMATTED' )
[1]	364
	365	CASE ( 17 )
	366
[1779]	367	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	368	FORM='FORMATTED' )
[1]	369
	370	CASE ( 18 )
	371
[1779]	372	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	373	FORM='FORMATTED' )
[1]	374
	375	CASE ( 19 )
	376
[1779]	377	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	378
	379	CASE ( 20 )
	380
	381	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	382	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	383	ENDIF
	384	IF ( myid_char == '' ) THEN
[1779]	385	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	386	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	387	ELSE
[1804]	388	#if defined( __parallel )
[1]	389	!
	390	!-- Set a barrier in order to allow that all other processors in the
	391	!-- directory created by PE0 can open their file
	392	CALL MPI_BARRIER( comm2d, ierr )
	393	#endif
[1986]	394	ioerr = 1
	395	DO WHILE ( ioerr /= 0 )
	396	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	397	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	398	IOSTAT=ioerr )
[1988]	399	IF ( ioerr /= 0 ) THEN
	400	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	401	TRIM( coupling_char )//'/'//myid_char// &
	402	'"! Trying again in 1 sec.'
	403	CALL fortran_sleep( 1 )
	404	ENDIF
[1986]	405	ENDDO
	406
[1]	407	ENDIF
	408
	409	CASE ( 21 )
	410
	411	IF ( data_output_2d_on_each_pe ) THEN
[1320]	412	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	413	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	414	ELSE
[1779]	415	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	416	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	417	ENDIF
	418
	419	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	420	!
	421	!-- Output for combine_plot_fields
	422	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	423	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	424	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	425	ENDIF
	426	!
	427	!-- Determine and write ISO2D coordiante header
	428	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
[1353]	429	hu = 0.0_wp
[1]	430	ho = (ny+1) * dy
	431	DO i = 1, ny
[1353]	432	eta(i) = REAL( i ) / ( ny + 1.0_wp )
[1]	433	ENDDO
[1353]	434	eta(0) = 0.0_wp
	435	eta(ny+1) = 1.0_wp
[1]	436
	437	WRITE (21) dx,eta,hu,ho
	438	DEALLOCATE( eta, ho, hu )
	439
	440	ENDIF
	441
	442	CASE ( 22 )
	443
	444	IF ( data_output_2d_on_each_pe ) THEN
[1320]	445	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	446	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	447	ELSE
[1779]	448	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	449	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	450	ENDIF
	451
	452	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	453	!
	454	!-- Output for combine_plot_fields
	455	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	456	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	457	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	458	ENDIF
	459	!
[1327]	460	!-- Determine and write ISO2D coordinate header
[1]	461	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
[1353]	462	hu = 0.0_wp
[1]	463	ho = zu(nz+1)
	464	DO i = 1, nz
	465	eta(i) = REAL( zu(i) ) / zu(nz+1)
	466	ENDDO
[1353]	467	eta(0) = 0.0_wp
	468	eta(nz+1) = 1.0_wp
[1]	469
	470	WRITE (22) dx,eta,hu,ho
	471	DEALLOCATE( eta, ho, hu )
	472
	473	ENDIF
	474
	475	CASE ( 23 )
	476
	477	IF ( data_output_2d_on_each_pe ) THEN
[1320]	478	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	479	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	480	ELSE
[1779]	481	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	482	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	483	ENDIF
	484
	485	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	486	!
	487	!-- Output for combine_plot_fields
	488	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	489	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	490	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	491	ENDIF
	492	!
	493	!-- Determine and write ISO2D coordiante header
	494	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
[1353]	495	hu = 0.0_wp
[1]	496	ho = zu(nz+1)
	497	DO i = 1, nz
	498	eta(i) = REAL( zu(i) ) / zu(nz+1)
	499	ENDDO
[1353]	500	eta(0) = 0.0_wp
	501	eta(nz+1) = 1.0_wp
[1]	502
	503	WRITE (23) dx,eta,hu,ho
	504	DEALLOCATE( eta, ho, hu )
	505
	506	ENDIF
	507
	508	CASE ( 30 )
	509
[1320]	510	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	511	FORM='UNFORMATTED' )
[1]	512	!
	513	!-- Write coordinate file for AVS
	514	IF ( myid == 0 ) THEN
	515	#if defined( __parallel )
	516	!
	517	!-- Specifications for combine_plot_fields
[1551]	518	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp
[1327]	519	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
[1]	520	#endif
	521	ENDIF
	522
	523	CASE ( 80 )
	524
	525	IF ( myid_char == '' ) THEN
[105]	526	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	527	FORM='FORMATTED', POSITION='APPEND' )
[1]	528	ELSE
	529	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	530	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	531	TRIM( coupling_char ) )
[1]	532	ENDIF
[1804]	533	#if defined( __parallel )
[1]	534	!
	535	!-- Set a barrier in order to allow that thereafter all other
	536	!-- processors in the directory created by PE0 can open their file.
	537	!-- WARNING: The following barrier will lead to hanging jobs, if
	538	!-- check_open is first called from routine
	539	!-- allocate_prt_memory!
	540	IF ( .NOT. openfile(80)%opened_before ) THEN
	541	CALL MPI_BARRIER( comm2d, ierr )
	542	ENDIF
	543	#endif
[1320]	544	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	545	myid_char, &
[102]	546	FORM='FORMATTED', POSITION='APPEND' )
[1]	547	ENDIF
	548
	549	IF ( .NOT. openfile(80)%opened_before ) THEN
	550	WRITE ( 80, 8000 ) TRIM( run_description_header )
	551	ENDIF
	552
	553	CASE ( 81 )
	554
[1779]	555	OPEN ( 81, FILE='PLOTSP_X_PAR'//TRIM( coupling_char ), &
	556	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
	557	POSITION='APPEND' )
[1]	558
	559	CASE ( 82 )
	560
[1779]	561	OPEN ( 82, FILE='PLOTSP_X_DATA'//TRIM( coupling_char ), &
	562	FORM='FORMATTED', POSITION = 'APPEND' )
[1]	563
	564	CASE ( 83 )
	565
[1779]	566	OPEN ( 83, FILE='PLOTSP_Y_PAR'//TRIM( coupling_char ), &
	567	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
	568	POSITION='APPEND' )
[1]	569
	570	CASE ( 84 )
	571
[1779]	572	OPEN ( 84, FILE='PLOTSP_Y_DATA'//TRIM( coupling_char ), &
	573	FORM='FORMATTED', POSITION='APPEND' )
[1]	574
	575	CASE ( 85 )
	576
	577	IF ( myid_char == '' ) THEN
[1320]	578	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	579	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	580	ELSE
	581	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	582	CALL local_system( 'mkdir PARTICLE_DATA' // &
	583	TRIM( coupling_char ) )
[1]	584	ENDIF
[1804]	585	#if defined( __parallel )
[1]	586	!
	587	!-- Set a barrier in order to allow that thereafter all other
	588	!-- processors in the directory created by PE0 can open their file
	589	CALL MPI_BARRIER( comm2d, ierr )
	590	#endif
[1986]	591	ioerr = 1
	592	DO WHILE ( ioerr /= 0 )
	593	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	594	myid_char, &
	595	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	596	IF ( ioerr /= 0 ) THEN
	597	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	598	TRIM( coupling_char )//'/'//myid_char// &
	599	'"! Trying again in 1 sec.'
	600	CALL fortran_sleep( 1 )
	601	ENDIF
[1986]	602	ENDDO
	603
[1]	604	ENDIF
	605
	606	IF ( .NOT. openfile(85)%opened_before ) THEN
	607	WRITE ( 85 ) run_description_header
	608	!
	609	!-- Attention: change version number whenever the output format on
[849]	610	!-- unit 85 is changed (see also in routine
	611	!-- lpm_data_output_particles)
[1359]	612	rtext = 'data format version 3.1'
[1]	613	WRITE ( 85 ) rtext
[1320]	614	WRITE ( 85 ) number_of_particle_groups, &
[1]	615	max_number_of_particle_groups
	616	WRITE ( 85 ) particle_groups
[1359]	617	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	618	ENDIF
	619
	620	#if defined( __netcdf )
	621	CASE ( 101, 111 )
	622	!
	623	!-- Set filename depending on unit number
	624	IF ( file_id == 101 ) THEN
[1779]	625	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	626	av = 0
	627	ELSE
[1779]	628	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	629	av = 1
	630	ENDIF
	631	!
[1031]	632	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	633	!-- be opened for extension, if its dimensions and variables match the
	634	!-- actual run.
	635	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	636	IF ( netcdf_extend ) THEN
	637	!
[1031]	638	!-- Open an existing netCDF file for output
[1783]	639	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	640	!
	641	!-- Read header information and set all ids. If there is a mismatch
	642	!-- between the previuos and the actual run, netcdf_extend is returned
	643	!-- as .FALSE.
[1783]	644	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	645
	646	!
	647	!-- Remove the local file, if it can not be extended
	648	IF ( .NOT. netcdf_extend ) THEN
	649	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	650	CALL netcdf_handle_error( 'check_open', 21 )
[493]	651	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	652	#if defined( __parallel )
[1745]	653	!
	654	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	655	!-- before any other processor tries to open a new file.
	656	!-- Barrier is only needed in case of parallel I/O
	657	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	658	#endif
[1]	659	ENDIF
	660
[1745]	661	ENDIF
[1]	662
	663	IF ( .NOT. netcdf_extend ) THEN
	664	!
[1031]	665	!-- Create a new netCDF output file with requested netCDF format
[1783]	666	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	667
	668	!
[1]	669	!-- Define the header
[1783]	670	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	671
[493]	672	!
[1031]	673	!-- In case of parallel netCDF output, create flag file which tells
[493]	674	!-- combine_plot_fields that nothing is to do.
[1031]	675	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	676	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	677	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	678	CLOSE( 99 )
	679	ENDIF
	680
[1]	681	ENDIF
	682
	683	CASE ( 102, 112 )
	684	!
	685	!-- Set filename depending on unit number
	686	IF ( file_id == 102 ) THEN
[1779]	687	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	688	av = 0
	689	ELSE
[1779]	690	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	691	av = 1
	692	ENDIF
	693	!
[1031]	694	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	695	!-- be opened for extension, if its dimensions and variables match the
	696	!-- actual run.
	697	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	698
	699	IF ( netcdf_extend ) THEN
	700	!
[1031]	701	!-- Open an existing netCDF file for output
[1783]	702	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	703	!
	704	!-- Read header information and set all ids. If there is a mismatch
	705	!-- between the previuos and the actual run, netcdf_extend is returned
	706	!-- as .FALSE.
[1783]	707	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	708
	709	!
	710	!-- Remove the local file, if it can not be extended
	711	IF ( .NOT. netcdf_extend ) THEN
	712	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	713	CALL netcdf_handle_error( 'check_open', 24 )
[493]	714	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	715	#if defined( __parallel )
[1745]	716	!
	717	!-- Set a barrier in order to assure that PE0 deleted the old file
	718	!-- before any other processor tries to open a new file
[1974]	719	!-- Barrier is only needed in case of parallel I/O
	720	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	721	#endif
[1]	722	ENDIF
	723
[1745]	724	ENDIF
[1]	725
	726	IF ( .NOT. netcdf_extend ) THEN
	727	!
[1031]	728	!-- Create a new netCDF output file with requested netCDF format
[1783]	729	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	730
	731	!
[1]	732	!-- Define the header
[1783]	733	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	734
[493]	735	!
[1031]	736	!-- In case of parallel netCDF output, create flag file which tells
[493]	737	!-- combine_plot_fields that nothing is to do.
[1031]	738	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	739	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	740	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	741	CLOSE( 99 )
	742	ENDIF
	743
[1]	744	ENDIF
	745
	746	CASE ( 103, 113 )
	747	!
	748	!-- Set filename depending on unit number
	749	IF ( file_id == 103 ) THEN
[1779]	750	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	751	av = 0
	752	ELSE
[1779]	753	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	754	av = 1
	755	ENDIF
	756	!
[1031]	757	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	758	!-- be opened for extension, if its dimensions and variables match the
	759	!-- actual run.
	760	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	761
	762	IF ( netcdf_extend ) THEN
	763	!
[1031]	764	!-- Open an existing netCDF file for output
[1783]	765	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	766	!
	767	!-- Read header information and set all ids. If there is a mismatch
	768	!-- between the previuos and the actual run, netcdf_extend is returned
	769	!-- as .FALSE.
[1783]	770	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	771
	772	!
	773	!-- Remove the local file, if it can not be extended
	774	IF ( .NOT. netcdf_extend ) THEN
	775	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	776	CALL netcdf_handle_error( 'check_open', 27 )
[493]	777	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	778	#if defined( __parallel )
[1745]	779	!
	780	!-- Set a barrier in order to assure that PE0 deleted the old file
	781	!-- before any other processor tries to open a new file
[1974]	782	!-- Barrier is only needed in case of parallel I/O
	783	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	784	#endif
[1]	785	ENDIF
	786
[1745]	787	ENDIF
[1]	788
	789	IF ( .NOT. netcdf_extend ) THEN
	790	!
[1031]	791	!-- Create a new netCDF output file with requested netCDF format
[1783]	792	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	793
	794	!
[1]	795	!-- Define the header
[1783]	796	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	797
[493]	798	!
[1031]	799	!-- In case of parallel netCDF output, create flag file which tells
[493]	800	!-- combine_plot_fields that nothing is to do.
[1031]	801	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	802	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	803	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	804	CLOSE( 99 )
	805	ENDIF
	806
[1]	807	ENDIF
	808
	809	CASE ( 104 )
	810	!
[102]	811	!-- Set filename
[1779]	812	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	813
	814	!
[1031]	815	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	816	!-- be opened for extension, if its variables match the actual run.
[102]	817	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	818
	819	IF ( netcdf_extend ) THEN
	820	!
[1031]	821	!-- Open an existing netCDF file for output
[1783]	822	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	823	!
	824	!-- Read header information and set all ids. If there is a mismatch
	825	!-- between the previuos and the actual run, netcdf_extend is returned
	826	!-- as .FALSE.
[1783]	827	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	828
	829	!
	830	!-- Remove the local file, if it can not be extended
	831	IF ( .NOT. netcdf_extend ) THEN
	832	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	833	CALL netcdf_handle_error( 'check_open', 30 )
[102]	834	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	835	ENDIF
	836
	837	ENDIF
	838
	839	IF ( .NOT. netcdf_extend ) THEN
	840	!
[1031]	841	!-- Create a new netCDF output file with requested netCDF format
[1783]	842	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	843	!
	844	!-- Define the header
[1783]	845	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	846
	847	ENDIF
	848
	849	CASE ( 105 )
	850	!
[102]	851	!-- Set filename
[1779]	852	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	853
	854	!
[1031]	855	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	856	!-- be opened for extension, if its variables match the actual run.
[102]	857	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	858
	859	IF ( netcdf_extend ) THEN
	860	!
[1031]	861	!-- Open an existing netCDF file for output
[1783]	862	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	863	!
	864	!-- Read header information and set all ids. If there is a mismatch
	865	!-- between the previuos and the actual run, netcdf_extend is returned
	866	!-- as .FALSE.
[1783]	867	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	868
	869	!
	870	!-- Remove the local file, if it can not be extended
	871	IF ( .NOT. netcdf_extend ) THEN
	872	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	873	CALL netcdf_handle_error( 'check_open', 33 )
[102]	874	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	875	ENDIF
	876
	877	ENDIF
	878
	879	IF ( .NOT. netcdf_extend ) THEN
	880	!
[1031]	881	!-- Create a new netCDF output file with requested netCDF format
[1783]	882	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	883	!
	884	!-- Define the header
[1783]	885	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	886
	887	ENDIF
	888
	889
	890	CASE ( 106, 116 )
	891	!
	892	!-- Set filename depending on unit number
	893	IF ( file_id == 106 ) THEN
[1779]	894	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	895	av = 0
	896	ELSE
[1779]	897	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	898	av = 1
	899	ENDIF
	900	!
[1031]	901	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	902	!-- be opened for extension, if its dimensions and variables match the
	903	!-- actual run.
	904	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	905
	906	IF ( netcdf_extend ) THEN
	907	!
[1031]	908	!-- Open an existing netCDF file for output
[1783]	909	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	910	!
	911	!-- Read header information and set all ids. If there is a mismatch
	912	!-- between the previuos and the actual run, netcdf_extend is returned
	913	!-- as .FALSE.
[1783]	914	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	915
	916	!
	917	!-- Remove the local file, if it can not be extended
	918	IF ( .NOT. netcdf_extend ) THEN
	919	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	920	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	921	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	922	#if defined( __parallel )
[1745]	923	!
	924	!-- Set a barrier in order to assure that PE0 deleted the old file
	925	!-- before any other processor tries to open a new file
[1974]	926	!-- Barrier is only needed in case of parallel I/O
	927	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	928	#endif
[1]	929	ENDIF
	930
[1745]	931	ENDIF
[1]	932
	933	IF ( .NOT. netcdf_extend ) THEN
	934	!
[1031]	935	!-- Create a new netCDF output file with requested netCDF format
[1783]	936	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	937
	938	!
[1]	939	!-- Define the header
[1783]	940	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	941
[493]	942	!
[1031]	943	!-- In case of parallel netCDF output, create flag file which tells
[493]	944	!-- combine_plot_fields that nothing is to do.
[1031]	945	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	946	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	947	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	948	CLOSE( 99 )
	949	ENDIF
	950
[1]	951	ENDIF
	952
	953
	954	CASE ( 107 )
	955	!
[102]	956	!-- Set filename
[1779]	957	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	958
	959	!
[1031]	960	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	961	!-- be opened for extension, if its variables match the actual run.
[102]	962	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	963
	964	IF ( netcdf_extend ) THEN
	965	!
[1031]	966	!-- Open an existing netCDF file for output
[1783]	967	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	968
[1]	969	!
	970	!-- Read header information and set all ids. If there is a mismatch
	971	!-- between the previuos and the actual run, netcdf_extend is returned
	972	!-- as .FALSE.
[1783]	973	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	974
	975	!
	976	!-- Remove the local file, if it can not be extended
	977	IF ( .NOT. netcdf_extend ) THEN
	978	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	979	CALL netcdf_handle_error( 'check_open', 39 )
[102]	980	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	981	ENDIF
	982
	983	ENDIF
	984
	985	IF ( .NOT. netcdf_extend ) THEN
	986	!
[1031]	987	!-- Create a new netCDF output file with requested netCDF format
[1783]	988	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	989	!
	990	!-- Define the header
[1783]	991	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	992
	993	ENDIF
	994
	995
	996	CASE ( 108 )
	997
	998	IF ( myid_char == '' ) THEN
[1779]	999	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
[1]	1000	ELSE
[1320]	1001	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
[105]	1002	myid_char
[1]	1003	ENDIF
	1004	!
[1031]	1005	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1006	!-- be opened for extension, if its variables match the actual run.
	1007	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1008
	1009	IF ( netcdf_extend ) THEN
	1010	!
[1031]	1011	!-- Open an existing netCDF file for output
[1783]	1012	CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	1013	!
	1014	!-- Read header information and set all ids. If there is a mismatch
	1015	!-- between the previuos and the actual run, netcdf_extend is returned
	1016	!-- as .FALSE.
[1783]	1017	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1018
	1019	!
	1020	!-- Remove the local file, if it can not be extended
	1021	IF ( .NOT. netcdf_extend ) THEN
	1022	nc_stat = NF90_CLOSE( id_set_prt )
[1783]	1023	CALL netcdf_handle_error( 'check_open', 42 )
[1745]	1024	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1025	ENDIF
	1026
	1027	ENDIF
	1028
	1029	IF ( .NOT. netcdf_extend ) THEN
	1030
	1031	!
	1032	!-- For runs on multiple processors create the subdirectory
	1033	IF ( myid_char /= '' ) THEN
[1320]	1034	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
[1]	1035	THEN ! needs modification in case of non-extendable sets
[1320]	1036	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1037	TRIM( coupling_char ) // '/' )
[1]	1038	ENDIF
[1804]	1039	#if defined( __parallel )
[807]	1040	!
[1]	1041	!-- Set a barrier in order to allow that all other processors in the
	1042	!-- directory created by PE0 can open their file
	1043	CALL MPI_BARRIER( comm2d, ierr )
	1044	#endif
	1045	ENDIF
	1046
	1047	!
[1031]	1048	!-- Create a new netCDF output file with requested netCDF format
[1783]	1049	CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1050
	1051	!
[1]	1052	!-- Define the header
[1783]	1053	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1054
	1055	ENDIF
	1056
	1057	CASE ( 109 )
	1058	!
[102]	1059	!-- Set filename
[1779]	1060	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1061
	1062	!
[1031]	1063	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1064	!-- be opened for extension, if its variables match the actual run.
[102]	1065	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1066
	1067	IF ( netcdf_extend ) THEN
	1068	!
[1031]	1069	!-- Open an existing netCDF file for output
[1783]	1070	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1071	!
	1072	!-- Read header information and set all ids. If there is a mismatch
	1073	!-- between the previuos and the actual run, netcdf_extend is returned
	1074	!-- as .FALSE.
[1783]	1075	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1076
	1077	!
	1078	!-- Remove the local file, if it can not be extended
	1079	IF ( .NOT. netcdf_extend ) THEN
	1080	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1081	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1082	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1083	ENDIF
	1084
	1085	ENDIF
	1086
	1087	IF ( .NOT. netcdf_extend ) THEN
	1088	!
[1031]	1089	!-- Create a new netCDF output file with requested netCDF format
[1783]	1090	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1091	!
	1092	!-- Define the header
[1783]	1093	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1094
	1095	ENDIF
[410]	1096
[1468]	1097
	1098	!
	1099	!-- Progress file that is used by the PALM watchdog
	1100	CASE ( 117 )
	1101
[1779]	1102	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	1103	STATUS='REPLACE', FORM='FORMATTED' )
[1957]	1104	!
	1105	!-- nc-file for virtual flight measurements
	1106	CASE ( 199 )
	1107	!
	1108	!-- Set filename
	1109	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1110
[1957]	1111	!
	1112	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1113	!-- be opened for extension, if its variables match the actual run.
	1114	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1115
[1957]	1116	IF ( netcdf_extend ) THEN
	1117	!
	1118	!-- Open an existing netCDF file for output
	1119	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1120	!
	1121	!-- Read header information and set all ids. If there is a mismatch
	1122	!-- between the previuos and the actual run, netcdf_extend is returned
	1123	!-- as .FALSE.
	1124	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1125
	1126	!
	1127	!-- Remove the local file, if it can not be extended
	1128	IF ( .NOT. netcdf_extend ) THEN
	1129	nc_stat = NF90_CLOSE( id_set_fl )
	1130	CALL netcdf_handle_error( 'check_open', 533 )
	1131	CALL local_system( 'rm ' // TRIM( filename ) )
	1132	ENDIF
	1133
	1134	ENDIF
	1135
	1136	IF ( .NOT. netcdf_extend ) THEN
	1137	!
	1138	!-- Create a new netCDF output file with requested netCDF format
	1139	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1140	!
	1141	!-- Define the header
	1142	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1143
	1144	ENDIF
	1145
	1146
[564]	1147	CASE ( 201:200+2*max_masks )
[410]	1148	!
	1149	!-- Set filename depending on unit number
[564]	1150	IF ( file_id <= 200+max_masks ) THEN
	1151	mid = file_id - 200
[410]	1152	WRITE ( mask_char,'(I2.2)') mid
[1779]	1153	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // &
	1154	TRIM( coupling_char )
[410]	1155	av = 0
	1156	ELSE
[564]	1157	mid = file_id - (200+max_masks)
[410]	1158	WRITE ( mask_char,'(I2.2)') mid
[1320]	1159	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
[1779]	1160	TRIM( coupling_char )
[410]	1161	av = 1
	1162	ENDIF
	1163	!
[1031]	1164	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1165	!-- be opened for extension, if its dimensions and variables match the
	1166	!-- actual run.
	1167	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1168
	1169	IF ( netcdf_extend ) THEN
	1170	!
[1031]	1171	!-- Open an existing netCDF file for output
[1783]	1172	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1173	.TRUE., 456 )
[410]	1174	!
	1175	!-- Read header information and set all ids. If there is a mismatch
	1176	!-- between the previuos and the actual run, netcdf_extend is returned
	1177	!-- as .FALSE.
[1783]	1178	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1179
[410]	1180	!
	1181	!-- Remove the local file, if it can not be extended
	1182	IF ( .NOT. netcdf_extend ) THEN
	1183	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1184	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1185	CALL local_system('rm ' // TRIM( filename ) )
	1186	ENDIF
[1]	1187
[410]	1188	ENDIF
	1189
	1190	IF ( .NOT. netcdf_extend ) THEN
[1]	1191	!
[1031]	1192	!-- Create a new netCDF output file with requested netCDF format
[1783]	1193	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1194	!
[410]	1195	!-- Define the header
[1783]	1196	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1197
	1198	ENDIF
	1199
	1200
	1201	#else
	1202
[564]	1203	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1204
	1205	!
[1]	1206	!-- Nothing is done in case of missing netcdf support
	1207	RETURN
	1208
	1209	#endif
	1210
	1211	CASE DEFAULT
	1212
[247]	1213	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1214	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1215
	1216	END SELECT
	1217
	1218	!
	1219	!-- Set open flag
	1220	openfile(file_id)%opened = .TRUE.
	1221
	1222	!
	1223	!-- Formats
[1320]	1224	3300 FORMAT ('#'/ &
	1225	'coord 1 file=',A,' filetype=unformatted'/ &
	1226	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1227	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
[1]	1228	'#')
	1229	4000 FORMAT ('# ',A)
[1320]	1230	5000 FORMAT ('# ',A/ &
	1231	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1232	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1233	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
[1]	1234	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
[1320]	1235	8000 FORMAT (A/ &
[1359]	1236	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1237	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1238	109('-'))
[1]	1239
	1240	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |