Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 2007

Last change on this file since 2007 was 2001, checked in by knoop, 8 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 46.6 KB

Rev	Line
[1682]	1	!> @file check_open.f90
[2000]	2	!------------------------------------------------------------------------------!
[1036]	3	! This file is part of PALM.
	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
[1804]	14	! You should have received a copy of the GNU fGeneral Public License along with
[1036]	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[1818]	17	! Copyright 1997-2016 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1805]	22	!
[2001]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_open.f90 2001 2016-08-20 18:41:22Z kanani $
	27	!
[2001]	28	! 2000 2016-08-20 18:09:15Z knoop
	29	! Forced header and separation lines into 80 columns
	30	!
[1989]	31	! 1988 2016-08-10 14:49:06Z gronemeier
	32	! informative message added if files cannot be opened in newly created directory
	33	!
[1987]	34	! 1986 2016-08-10 14:07:17Z gronemeier
	35	! Bugfix: check if output can be opened in newly created directory. If not
	36	! wait one second and try again.
	37	!
[1975]	38	! 1974 2016-07-26 08:43:25Z gronemeier
	39	! Bugfix: MPI barriers after deleting non-extendable files must only be called
	40	! in case of parallel I/O
	41	!
[1958]	42	! 1957 2016-07-07 10:43:48Z suehring
	43	! flight module added
	44	!
[1805]	45	! 1804 2016-04-05 16:30:18Z maronga
	46	! Removed code for parameter file check (__check)
	47	!
[1784]	48	! 1783 2016-03-06 18:36:17Z raasch
	49	! name change of netcdf routines and module + related changes
	50	!
[1780]	51	! 1779 2016-03-03 08:01:28Z raasch
	52	! coupling_char is trimmed at every place it occurs, because it can have
	53	! different length now
	54	!
[1746]	55	! 1745 2016-02-05 13:06:51Z gronemeier
	56	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
	57	!
[1683]	58	! 1682 2015-10-07 23:56:08Z knoop
	59	! Code annotations made doxygen readable
	60	!
[1552]	61	! 1551 2015-03-03 14:18:16Z maronga
	62	! Removed redundant output for combine_plot_fields
	63	!
[1469]	64	! 1468 2014-09-24 14:06:57Z maronga
	65	! Adapted for use on up to 6-digit processor cores
	66	! Added file unit 117 (PROGRESS)
	67	!
[1360]	68	! 1359 2014-04-11 17:15:14Z hoffmann
	69	! Format of particle exchange statistics extended to reasonable numbers of
	70	! particles.
	71	!
[1354]	72	! 1353 2014-04-08 15:21:23Z heinze
	73	! REAL constants provided with KIND-attribute,
	74	! declaration for unused variables xkoor, ykoor, zkoor removed
	75	!
[1329]	76	! 1327 2014-03-21 11:00:16Z raasch
	77	! parts concerning iso2d and avs output removed
	78	!
[1321]	79	! 1320 2014-03-20 08:40:49Z raasch
[1320]	80	! ONLY-attribute added to USE-statements,
	81	! kind-parameters added to all INTEGER and REAL declaration statements,
	82	! kinds are defined in new module kinds,
	83	! old module precision_kind is removed,
	84	! revision history before 2012 removed,
	85	! comment fields (!:) to be used for variable explanations added to
	86	! all variable declaration statements
[1]	87	!
[1107]	88	! 1106 2013-03-04 05:31:38Z raasch
	89	! array_kind renamed precision_kind
	90	!
[1093]	91	! 1092 2013-02-02 11:24:22Z raasch
	92	! unused variables removed
	93	!
[1037]	94	! 1036 2012-10-22 13:43:42Z raasch
	95	! code put under GPL (PALM 3.9)
	96	!
[1035]	97	! 1031 2012-10-19 14:35:30Z raasch
	98	! netCDF4 without parallel file support implemented,
	99	! opening of netCDF files are done by new routines create_netcdf_file and
	100	! open_write_netcdf_file
	101	!
[965]	102	! 964 2012-07-26 09:14:24Z raasch
	103	! old profil-units (40:49) removed,
	104	! append feature removed from unit 14
	105	!
[850]	106	! 849 2012-03-15 10:35:09Z raasch
	107	! comment changed
	108	!
[810]	109	! 809 2012-01-30 13:32:58Z maronga
	110	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	111	!
[808]	112	! 807 2012-01-25 11:53:51Z maronga
	113	! New cpp directive "__check" implemented which is used by check_namelist_files
	114	!
[1]	115	! Revision 1.1 1997/08/11 06:10:55 raasch
	116	! Initial revision
	117	!
	118	!
	119	! Description:
	120	! ------------
[1682]	121	!> Check if file unit is open. If not, open file and, if necessary, write a
	122	!> header or start other initializing actions, respectively.
[1]	123	!------------------------------------------------------------------------------!
[1682]	124	SUBROUTINE check_open( file_id )
	125
[1]	126
[1320]	127	USE arrays_3d, &
	128	ONLY: zu
	129
	130	USE control_parameters, &
[1327]	131	ONLY: avs_data_file, coupling_char, data_output_2d_on_each_pe, host, &
[1783]	132	max_masks, message_string, mid, nz_do3d, openfile, &
[1320]	133	return_addres, return_username, run_description_header, runnr
	134
	135	USE grid_variables, &
	136	ONLY: dx, dy
	137
	138	USE indices, &
[1551]	139	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
[1320]	140
	141	USE kinds
	142
[1783]	143	#if defined( __netcdf )
	144	USE NETCDF
	145	#endif
[1320]	146
[1783]	147	USE netcdf_interface, &
[1957]	148	ONLY: id_set_fl, id_set_mask, id_set_pr, id_set_prt, id_set_pts, &
	149	id_set_sp, id_set_ts, id_set_xy, id_set_xz, id_set_yz, &
	150	id_set_3d, nc_stat, netcdf_create_file, netcdf_data_format, &
	151	netcdf_define_header, netcdf_handle_error, netcdf_open_write_file
[1783]	152
[1320]	153	USE particle_attributes, &
	154	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
	155	particle_groups
	156
[1]	157	USE pegrid
	158
[1986]	159	USE posix_calls_from_fortran, &
	160	ONLY: fortran_sleep
	161
[1320]	162	USE profil_parameter, &
	163	ONLY: cross_ts_numbers, cross_ts_number_count
	164
	165	USE statistics, &
	166	ONLY: region, statistic_regions
	167
	168
[1]	169	IMPLICIT NONE
	170
[1682]	171	CHARACTER (LEN=2) :: mask_char !<
	172	CHARACTER (LEN=2) :: suffix !<
	173	CHARACTER (LEN=20) :: xtext = 'time in s' !<
	174	CHARACTER (LEN=30) :: filename !<
	175	CHARACTER (LEN=40) :: avs_coor_file !<
	176	CHARACTER (LEN=40) :: avs_coor_file_localname !<
	177	CHARACTER (LEN=40) :: avs_data_file_localname !<
	178	CHARACTER (LEN=80) :: rtext !<
	179	CHARACTER (LEN=100) :: avs_coor_file_catalog !<
	180	CHARACTER (LEN=100) :: avs_data_file_catalog !<
	181	CHARACTER (LEN=100) :: batch_scp !<
	182	CHARACTER (LEN=100) :: line !<
	183	CHARACTER (LEN=400) :: command !<
[1]	184
[1682]	185	INTEGER(iwp) :: av !<
	186	INTEGER(iwp) :: numline = 1 !<
	187	INTEGER(iwp) :: cranz !<
	188	INTEGER(iwp) :: file_id !<
	189	INTEGER(iwp) :: i !<
	190	INTEGER(iwp) :: iaddres !<
[1986]	191	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
[1682]	192	INTEGER(iwp) :: iusern !<
	193	INTEGER(iwp) :: j !<
	194	INTEGER(iwp) :: k !<
	195	INTEGER(iwp) :: legpos = 1 !<
	196	INTEGER(iwp) :: timodex = 1 !<
[1320]	197
[1682]	198	INTEGER(iwp), DIMENSION(10) :: klist !<
[1]	199
[1682]	200	LOGICAL :: avs_coor_file_found = .FALSE. !<
	201	LOGICAL :: avs_data_file_found = .FALSE. !<
	202	LOGICAL :: datleg = .TRUE. !<
	203	LOGICAL :: get_filenames !<
	204	LOGICAL :: grid = .TRUE. !<
	205	LOGICAL :: netcdf_extend !<
	206	LOGICAL :: rand = .TRUE. !<
	207	LOGICAL :: swap = .TRUE. !<
	208	LOGICAL :: twoxa = .TRUE. !<
	209	LOGICAL :: twoya = .TRUE. !<
[1]	210
[1682]	211	REAL(wp) :: ansx = -999.999_wp !<
	212	REAL(wp) :: ansy = -999.999_wp !<
	213	REAL(wp) :: gwid = 0.1_wp !<
	214	REAL(wp) :: rlegfak = 1.5_wp !<
	215	REAL(wp) :: sizex = 250.0_wp !<
	216	REAL(wp) :: sizey = 40.0_wp !<
	217	REAL(wp) :: texfac = 1.5_wp !<
[1]	218
[1682]	219	REAL(wp), DIMENSION(:), ALLOCATABLE :: eta !<
	220	REAL(wp), DIMENSION(:), ALLOCATABLE :: ho !<
	221	REAL(wp), DIMENSION(:), ALLOCATABLE :: hu !<
[1353]	222
[1]	223
	224
[1320]	225	NAMELIST /RAHMEN/ numline, cranz, datleg, rtext, swap
	226	NAMELIST /CROSS/ ansx, ansy, grid, gwid, klist, legpos, &
	227	rand, rlegfak, sizex, sizey, texfac, &
[1]	228	timodex, twoxa, twoya, xtext
	229
	230
	231	!
	232	!-- Immediate return if file already open
	233	IF ( openfile(file_id)%opened ) RETURN
	234
	235	!
	236	!-- Only certain files are allowed to be re-opened
	237	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	238	!-- has not been checked so far, if it works!
	239	IF ( openfile(file_id)%opened_before ) THEN
	240	SELECT CASE ( file_id )
[1468]	241	CASE ( 13, 14, 21, 22, 23, 80:85, 117 )
[1]	242	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[1320]	243	message_string = 're-open of unit ' // &
[274]	244	'14 is not verified. Please check results!'
[247]	245	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	246	ENDIF
[143]	247
[1]	248	CASE DEFAULT
[1320]	249	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	250	' is not allowed'
[247]	251	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	252
[1]	253	RETURN
[143]	254
[1]	255	END SELECT
	256	ENDIF
	257
	258	!
	259	!-- Check if file may be opened on the relevant PE
	260	SELECT CASE ( file_id )
	261
[1468]	262	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109, 117 )
[410]	263
[493]	264	IF ( myid /= 0 ) THEN
[1320]	265	WRITE( message_string, * ) 'opening file-id ',file_id, &
[493]	266	' not allowed for PE ',myid
	267	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	268	ENDIF
	269
[564]	270	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	271
[1031]	272	IF ( netcdf_data_format < 5 ) THEN
[247]	273
[410]	274	IF ( myid /= 0 ) THEN
[1320]	275	WRITE( message_string, * ) 'opening file-id ',file_id, &
[410]	276	' not allowed for PE ',myid
	277	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	278	ENDIF
	279
[493]	280	ENDIF
[1]	281
	282	CASE ( 21, 22, 23 )
	283
	284	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	285	IF ( myid /= 0 ) THEN
[1320]	286	WRITE( message_string, * ) 'opening file-id ',file_id, &
[247]	287	' not allowed for PE ',myid
[277]	288	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	289	END IF
[1]	290	ENDIF
	291
[1327]	292	CASE ( 27, 28, 29, 31, 33, 71:73, 90:99 )
[1]	293
	294	!
	295	!-- File-ids that are used temporarily in other routines
[1320]	296	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	297	' is not allowed since it is used otherwise'
[247]	298	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	299
[1]	300	END SELECT
	301
	302	!
	303	!-- Open relevant files
	304	SELECT CASE ( file_id )
	305
	306	CASE ( 11 )
	307
[1779]	308	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
[102]	309	STATUS='OLD' )
[1]	310
	311	CASE ( 13 )
	312
	313	IF ( myid_char == '' ) THEN
[1779]	314	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
[102]	315	FORM='UNFORMATTED', STATUS='OLD' )
[1]	316	ELSE
[143]	317	!
[1468]	318	!-- First opening of unit 13 openes file _000000 on all PEs because
	319	!-- only this file contains the global variables
[143]	320	IF ( .NOT. openfile(file_id)%opened_before ) THEN
[1779]	321	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
[143]	322	FORM='UNFORMATTED', STATUS='OLD' )
	323	ELSE
[1779]	324	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
	325	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
[143]	326	ENDIF
[1]	327	ENDIF
	328
	329	CASE ( 14 )
	330
	331	IF ( myid_char == '' ) THEN
[1779]	332	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
[102]	333	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	334	ELSE
	335	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	336	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
[1]	337	ENDIF
[1804]	338	#if defined( __parallel )
[1]	339	!
	340	!-- Set a barrier in order to allow that all other processors in the
	341	!-- directory created by PE0 can open their file
	342	CALL MPI_BARRIER( comm2d, ierr )
	343	#endif
[1986]	344	ioerr = 1
	345	DO WHILE ( ioerr /= 0 )
	346	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
	347	FORM='UNFORMATTED', IOSTAT=ioerr )
[1988]	348	IF ( ioerr /= 0 ) THEN
	349	WRITE( 9, * ) '*** could not open "BINOUT'// &
	350	TRIM(coupling_char)//'/'//myid_char// &
	351	'"! Trying again in 1 sec.'
	352	CALL fortran_sleep( 1 )
	353	ENDIF
[1986]	354	ENDDO
	355
[1]	356	ENDIF
	357
	358	CASE ( 15 )
	359
[1779]	360	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
	361	FORM='FORMATTED' )
[1]	362
	363	CASE ( 16 )
	364
[1779]	365	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
	366	FORM='FORMATTED' )
[1]	367
	368	CASE ( 17 )
	369
[1779]	370	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
	371	FORM='FORMATTED' )
[1]	372
	373	CASE ( 18 )
	374
[1779]	375	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
	376	FORM='FORMATTED' )
[1]	377
	378	CASE ( 19 )
	379
[1779]	380	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
[1]	381
	382	CASE ( 20 )
	383
	384	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[1779]	385	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
[1]	386	ENDIF
	387	IF ( myid_char == '' ) THEN
[1779]	388	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
[102]	389	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	390	ELSE
[1804]	391	#if defined( __parallel )
[1]	392	!
	393	!-- Set a barrier in order to allow that all other processors in the
	394	!-- directory created by PE0 can open their file
	395	CALL MPI_BARRIER( comm2d, ierr )
	396	#endif
[1986]	397	ioerr = 1
	398	DO WHILE ( ioerr /= 0 )
	399	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
	400	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
	401	IOSTAT=ioerr )
[1988]	402	IF ( ioerr /= 0 ) THEN
	403	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
	404	TRIM( coupling_char )//'/'//myid_char// &
	405	'"! Trying again in 1 sec.'
	406	CALL fortran_sleep( 1 )
	407	ENDIF
[1986]	408	ENDDO
	409
[1]	410	ENDIF
	411
	412	CASE ( 21 )
	413
	414	IF ( data_output_2d_on_each_pe ) THEN
[1320]	415	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	416	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	417	ELSE
[1779]	418	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
[102]	419	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	420	ENDIF
	421
	422	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	423	!
	424	!-- Output for combine_plot_fields
	425	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	426	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	427	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	428	ENDIF
	429	!
	430	!-- Determine and write ISO2D coordiante header
	431	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
[1353]	432	hu = 0.0_wp
[1]	433	ho = (ny+1) * dy
	434	DO i = 1, ny
[1353]	435	eta(i) = REAL( i ) / ( ny + 1.0_wp )
[1]	436	ENDDO
[1353]	437	eta(0) = 0.0_wp
	438	eta(ny+1) = 1.0_wp
[1]	439
	440	WRITE (21) dx,eta,hu,ho
	441	DEALLOCATE( eta, ho, hu )
	442
	443	ENDIF
	444
	445	CASE ( 22 )
	446
	447	IF ( data_output_2d_on_each_pe ) THEN
[1320]	448	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	449	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	450	ELSE
[1779]	451	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
	452	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	453	ENDIF
	454
	455	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	456	!
	457	!-- Output for combine_plot_fields
	458	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	459	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	460	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	461	ENDIF
	462	!
[1327]	463	!-- Determine and write ISO2D coordinate header
[1]	464	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
[1353]	465	hu = 0.0_wp
[1]	466	ho = zu(nz+1)
	467	DO i = 1, nz
	468	eta(i) = REAL( zu(i) ) / zu(nz+1)
	469	ENDDO
[1353]	470	eta(0) = 0.0_wp
	471	eta(nz+1) = 1.0_wp
[1]	472
	473	WRITE (22) dx,eta,hu,ho
	474	DEALLOCATE( eta, ho, hu )
	475
	476	ENDIF
	477
	478	CASE ( 23 )
	479
	480	IF ( data_output_2d_on_each_pe ) THEN
[1320]	481	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	482	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	483	ELSE
[1779]	484	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
	485	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	486	ENDIF
	487
	488	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	489	!
	490	!-- Output for combine_plot_fields
	491	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	492	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	493	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	494	ENDIF
	495	!
	496	!-- Determine and write ISO2D coordiante header
	497	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
[1353]	498	hu = 0.0_wp
[1]	499	ho = zu(nz+1)
	500	DO i = 1, nz
	501	eta(i) = REAL( zu(i) ) / zu(nz+1)
	502	ENDDO
[1353]	503	eta(0) = 0.0_wp
	504	eta(nz+1) = 1.0_wp
[1]	505
	506	WRITE (23) dx,eta,hu,ho
	507	DEALLOCATE( eta, ho, hu )
	508
	509	ENDIF
	510
	511	CASE ( 30 )
	512
[1320]	513	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	514	FORM='UNFORMATTED' )
[1]	515	!
	516	!-- Write coordinate file for AVS
	517	IF ( myid == 0 ) THEN
	518	#if defined( __parallel )
	519	!
	520	!-- Specifications for combine_plot_fields
[1551]	521	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp
[1327]	522	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
[1]	523	#endif
	524	ENDIF
	525
	526	CASE ( 50:59 )
	527
	528	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	529	suffix = ''
	530	ELSE
	531	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	532	ENDIF
[1320]	533	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	534	TRIM( suffix ), &
[102]	535	FORM='FORMATTED', RECL=496 )
[1]	536	!
	537	!-- Write PROFIL parameter file for output of time series
	538	!-- NOTE: To be on the safe side, this output is done at the beginning of
	539	!-- the model run (in case of collapse) and it is repeated in
	540	!-- close_file, then, however, with value ranges for the coordinate
	541	!-- systems
	542	!
	543	!-- Firstly determine the number of the coordinate systems to be drawn
	544	cranz = 0
	545	DO j = 1, 10
	546	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	547	ENDDO
[1320]	548	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
[1]	549	TRIM( region( file_id - 50 ) )
	550	!
	551	!-- Write RAHMEN parameter
[1320]	552	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	553	TRIM( suffix ), &
[102]	554	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	555	WRITE ( 90, RAHMEN )
	556	!
	557	!-- Determine and write CROSS parameters for the individual coordinate
	558	!-- systems
	559	DO j = 1, 10
	560	k = cross_ts_number_count(j)
	561	IF ( k /= 0 ) THEN
	562	!
	563	!-- Store curve numbers, colours and line style
	564	klist(1:k) = cross_ts_numbers(1:k,j)
	565	klist(k+1:10) = 999999
	566	!
	567	!-- Write CROSS parameter
	568	WRITE ( 90, CROSS )
	569
	570	ENDIF
	571	ENDDO
	572
	573	CLOSE ( 90 )
	574	!
	575	!-- Write all labels at the top of the data file, but only during the
	576	!-- first run of a sequence of jobs. The following jobs copy the time
	577	!-- series data to the bottom of that file.
	578	IF ( runnr == 0 ) THEN
[1320]	579	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
[1]	580	' ' // TRIM( region( file_id - 50 ) )
	581	ENDIF
	582
	583
	584	CASE ( 80 )
	585
	586	IF ( myid_char == '' ) THEN
[105]	587	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	588	FORM='FORMATTED', POSITION='APPEND' )
[1]	589	ELSE
	590	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[1779]	591	CALL local_system( 'mkdir PARTICLE_INFOS' // &
	592	TRIM( coupling_char ) )
[1]	593	ENDIF
[1804]	594	#if defined( __parallel )
[1]	595	!
	596	!-- Set a barrier in order to allow that thereafter all other
	597	!-- processors in the directory created by PE0 can open their file.
	598	!-- WARNING: The following barrier will lead to hanging jobs, if
	599	!-- check_open is first called from routine
	600	!-- allocate_prt_memory!
	601	IF ( .NOT. openfile(80)%opened_before ) THEN
	602	CALL MPI_BARRIER( comm2d, ierr )
	603	ENDIF
	604	#endif
[1320]	605	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	606	myid_char, &
[102]	607	FORM='FORMATTED', POSITION='APPEND' )
[1]	608	ENDIF
	609
	610	IF ( .NOT. openfile(80)%opened_before ) THEN
	611	WRITE ( 80, 8000 ) TRIM( run_description_header )
	612	ENDIF
	613
	614	CASE ( 81 )
	615
[1779]	616	OPEN ( 81, FILE='PLOTSP_X_PAR'//TRIM( coupling_char ), &
	617	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
	618	POSITION='APPEND' )
[1]	619
	620	CASE ( 82 )
	621
[1779]	622	OPEN ( 82, FILE='PLOTSP_X_DATA'//TRIM( coupling_char ), &
	623	FORM='FORMATTED', POSITION = 'APPEND' )
[1]	624
	625	CASE ( 83 )
	626
[1779]	627	OPEN ( 83, FILE='PLOTSP_Y_PAR'//TRIM( coupling_char ), &
	628	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
	629	POSITION='APPEND' )
[1]	630
	631	CASE ( 84 )
	632
[1779]	633	OPEN ( 84, FILE='PLOTSP_Y_DATA'//TRIM( coupling_char ), &
	634	FORM='FORMATTED', POSITION='APPEND' )
[1]	635
	636	CASE ( 85 )
	637
	638	IF ( myid_char == '' ) THEN
[1320]	639	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	640	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	641	ELSE
	642	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[1779]	643	CALL local_system( 'mkdir PARTICLE_DATA' // &
	644	TRIM( coupling_char ) )
[1]	645	ENDIF
[1804]	646	#if defined( __parallel )
[1]	647	!
	648	!-- Set a barrier in order to allow that thereafter all other
	649	!-- processors in the directory created by PE0 can open their file
	650	CALL MPI_BARRIER( comm2d, ierr )
	651	#endif
[1986]	652	ioerr = 1
	653	DO WHILE ( ioerr /= 0 )
	654	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	655	myid_char, &
	656	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
[1988]	657	IF ( ioerr /= 0 ) THEN
	658	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
	659	TRIM( coupling_char )//'/'//myid_char// &
	660	'"! Trying again in 1 sec.'
	661	CALL fortran_sleep( 1 )
	662	ENDIF
[1986]	663	ENDDO
	664
[1]	665	ENDIF
	666
	667	IF ( .NOT. openfile(85)%opened_before ) THEN
	668	WRITE ( 85 ) run_description_header
	669	!
	670	!-- Attention: change version number whenever the output format on
[849]	671	!-- unit 85 is changed (see also in routine
	672	!-- lpm_data_output_particles)
[1359]	673	rtext = 'data format version 3.1'
[1]	674	WRITE ( 85 ) rtext
[1320]	675	WRITE ( 85 ) number_of_particle_groups, &
[1]	676	max_number_of_particle_groups
	677	WRITE ( 85 ) particle_groups
[1359]	678	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
[1]	679	ENDIF
	680
	681	#if defined( __netcdf )
	682	CASE ( 101, 111 )
	683	!
	684	!-- Set filename depending on unit number
	685	IF ( file_id == 101 ) THEN
[1779]	686	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
[1]	687	av = 0
	688	ELSE
[1779]	689	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
[1]	690	av = 1
	691	ENDIF
	692	!
[1031]	693	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	694	!-- be opened for extension, if its dimensions and variables match the
	695	!-- actual run.
	696	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	697	IF ( netcdf_extend ) THEN
	698	!
[1031]	699	!-- Open an existing netCDF file for output
[1783]	700	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	701	!
	702	!-- Read header information and set all ids. If there is a mismatch
	703	!-- between the previuos and the actual run, netcdf_extend is returned
	704	!-- as .FALSE.
[1783]	705	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	706
	707	!
	708	!-- Remove the local file, if it can not be extended
	709	IF ( .NOT. netcdf_extend ) THEN
	710	nc_stat = NF90_CLOSE( id_set_xy(av) )
[1783]	711	CALL netcdf_handle_error( 'check_open', 21 )
[493]	712	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	713	#if defined( __parallel )
[1745]	714	!
	715	!-- Set a barrier in order to assure that PE0 deleted the old file
[1974]	716	!-- before any other processor tries to open a new file.
	717	!-- Barrier is only needed in case of parallel I/O
	718	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	719	#endif
[1]	720	ENDIF
	721
[1745]	722	ENDIF
[1]	723
	724	IF ( .NOT. netcdf_extend ) THEN
	725	!
[1031]	726	!-- Create a new netCDF output file with requested netCDF format
[1783]	727	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	728
	729	!
[1]	730	!-- Define the header
[1783]	731	CALL netcdf_define_header( 'xy', netcdf_extend, av )
[1]	732
[493]	733	!
[1031]	734	!-- In case of parallel netCDF output, create flag file which tells
[493]	735	!-- combine_plot_fields that nothing is to do.
[1031]	736	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	737	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	738	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	739	CLOSE( 99 )
	740	ENDIF
	741
[1]	742	ENDIF
	743
	744	CASE ( 102, 112 )
	745	!
	746	!-- Set filename depending on unit number
	747	IF ( file_id == 102 ) THEN
[1779]	748	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
[1]	749	av = 0
	750	ELSE
[1779]	751	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
[1]	752	av = 1
	753	ENDIF
	754	!
[1031]	755	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	756	!-- be opened for extension, if its dimensions and variables match the
	757	!-- actual run.
	758	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	759
	760	IF ( netcdf_extend ) THEN
	761	!
[1031]	762	!-- Open an existing netCDF file for output
[1783]	763	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	764	!
	765	!-- Read header information and set all ids. If there is a mismatch
	766	!-- between the previuos and the actual run, netcdf_extend is returned
	767	!-- as .FALSE.
[1783]	768	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	769
	770	!
	771	!-- Remove the local file, if it can not be extended
	772	IF ( .NOT. netcdf_extend ) THEN
	773	nc_stat = NF90_CLOSE( id_set_xz(av) )
[1783]	774	CALL netcdf_handle_error( 'check_open', 24 )
[493]	775	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	776	#if defined( __parallel )
[1745]	777	!
	778	!-- Set a barrier in order to assure that PE0 deleted the old file
	779	!-- before any other processor tries to open a new file
[1974]	780	!-- Barrier is only needed in case of parallel I/O
	781	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	782	#endif
[1]	783	ENDIF
	784
[1745]	785	ENDIF
[1]	786
	787	IF ( .NOT. netcdf_extend ) THEN
	788	!
[1031]	789	!-- Create a new netCDF output file with requested netCDF format
[1783]	790	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	791
	792	!
[1]	793	!-- Define the header
[1783]	794	CALL netcdf_define_header( 'xz', netcdf_extend, av )
[1]	795
[493]	796	!
[1031]	797	!-- In case of parallel netCDF output, create flag file which tells
[493]	798	!-- combine_plot_fields that nothing is to do.
[1031]	799	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	800	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	801	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	802	CLOSE( 99 )
	803	ENDIF
	804
[1]	805	ENDIF
	806
	807	CASE ( 103, 113 )
	808	!
	809	!-- Set filename depending on unit number
	810	IF ( file_id == 103 ) THEN
[1779]	811	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
[1]	812	av = 0
	813	ELSE
[1779]	814	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
[1]	815	av = 1
	816	ENDIF
	817	!
[1031]	818	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	819	!-- be opened for extension, if its dimensions and variables match the
	820	!-- actual run.
	821	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	822
	823	IF ( netcdf_extend ) THEN
	824	!
[1031]	825	!-- Open an existing netCDF file for output
[1783]	826	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	827	!
	828	!-- Read header information and set all ids. If there is a mismatch
	829	!-- between the previuos and the actual run, netcdf_extend is returned
	830	!-- as .FALSE.
[1783]	831	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	832
	833	!
	834	!-- Remove the local file, if it can not be extended
	835	IF ( .NOT. netcdf_extend ) THEN
	836	nc_stat = NF90_CLOSE( id_set_yz(av) )
[1783]	837	CALL netcdf_handle_error( 'check_open', 27 )
[493]	838	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	839	#if defined( __parallel )
[1745]	840	!
	841	!-- Set a barrier in order to assure that PE0 deleted the old file
	842	!-- before any other processor tries to open a new file
[1974]	843	!-- Barrier is only needed in case of parallel I/O
	844	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	845	#endif
[1]	846	ENDIF
	847
[1745]	848	ENDIF
[1]	849
	850	IF ( .NOT. netcdf_extend ) THEN
	851	!
[1031]	852	!-- Create a new netCDF output file with requested netCDF format
[1783]	853	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	854
	855	!
[1]	856	!-- Define the header
[1783]	857	CALL netcdf_define_header( 'yz', netcdf_extend, av )
[1]	858
[493]	859	!
[1031]	860	!-- In case of parallel netCDF output, create flag file which tells
[493]	861	!-- combine_plot_fields that nothing is to do.
[1031]	862	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	863	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	864	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	865	CLOSE( 99 )
	866	ENDIF
	867
[1]	868	ENDIF
	869
	870	CASE ( 104 )
	871	!
[102]	872	!-- Set filename
[1779]	873	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
[102]	874
	875	!
[1031]	876	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	877	!-- be opened for extension, if its variables match the actual run.
[102]	878	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	879
	880	IF ( netcdf_extend ) THEN
	881	!
[1031]	882	!-- Open an existing netCDF file for output
[1783]	883	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
[1]	884	!
	885	!-- Read header information and set all ids. If there is a mismatch
	886	!-- between the previuos and the actual run, netcdf_extend is returned
	887	!-- as .FALSE.
[1783]	888	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	889
	890	!
	891	!-- Remove the local file, if it can not be extended
	892	IF ( .NOT. netcdf_extend ) THEN
	893	nc_stat = NF90_CLOSE( id_set_pr )
[1783]	894	CALL netcdf_handle_error( 'check_open', 30 )
[102]	895	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	896	ENDIF
	897
	898	ENDIF
	899
	900	IF ( .NOT. netcdf_extend ) THEN
	901	!
[1031]	902	!-- Create a new netCDF output file with requested netCDF format
[1783]	903	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
[1]	904	!
	905	!-- Define the header
[1783]	906	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
[1]	907
	908	ENDIF
	909
	910	CASE ( 105 )
	911	!
[102]	912	!-- Set filename
[1779]	913	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
[102]	914
	915	!
[1031]	916	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	917	!-- be opened for extension, if its variables match the actual run.
[102]	918	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	919
	920	IF ( netcdf_extend ) THEN
	921	!
[1031]	922	!-- Open an existing netCDF file for output
[1783]	923	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
[1]	924	!
	925	!-- Read header information and set all ids. If there is a mismatch
	926	!-- between the previuos and the actual run, netcdf_extend is returned
	927	!-- as .FALSE.
[1783]	928	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	929
	930	!
	931	!-- Remove the local file, if it can not be extended
	932	IF ( .NOT. netcdf_extend ) THEN
	933	nc_stat = NF90_CLOSE( id_set_ts )
[1783]	934	CALL netcdf_handle_error( 'check_open', 33 )
[102]	935	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	936	ENDIF
	937
	938	ENDIF
	939
	940	IF ( .NOT. netcdf_extend ) THEN
	941	!
[1031]	942	!-- Create a new netCDF output file with requested netCDF format
[1783]	943	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
[1]	944	!
	945	!-- Define the header
[1783]	946	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
[1]	947
	948	ENDIF
	949
	950
	951	CASE ( 106, 116 )
	952	!
	953	!-- Set filename depending on unit number
	954	IF ( file_id == 106 ) THEN
[1779]	955	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
[1]	956	av = 0
	957	ELSE
[1779]	958	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
[1]	959	av = 1
	960	ENDIF
	961	!
[1031]	962	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	963	!-- be opened for extension, if its dimensions and variables match the
	964	!-- actual run.
	965	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	966
	967	IF ( netcdf_extend ) THEN
	968	!
[1031]	969	!-- Open an existing netCDF file for output
[1783]	970	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	971	!
	972	!-- Read header information and set all ids. If there is a mismatch
	973	!-- between the previuos and the actual run, netcdf_extend is returned
	974	!-- as .FALSE.
[1783]	975	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	976
	977	!
	978	!-- Remove the local file, if it can not be extended
	979	IF ( .NOT. netcdf_extend ) THEN
	980	nc_stat = NF90_CLOSE( id_set_3d(av) )
[1783]	981	CALL netcdf_handle_error( 'check_open', 36 )
[1745]	982	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1804]	983	#if defined( __parallel )
[1745]	984	!
	985	!-- Set a barrier in order to assure that PE0 deleted the old file
	986	!-- before any other processor tries to open a new file
[1974]	987	!-- Barrier is only needed in case of parallel I/O
	988	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
[1745]	989	#endif
[1]	990	ENDIF
	991
[1745]	992	ENDIF
[1]	993
	994	IF ( .NOT. netcdf_extend ) THEN
	995	!
[1031]	996	!-- Create a new netCDF output file with requested netCDF format
[1783]	997	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	998
	999	!
[1]	1000	!-- Define the header
[1783]	1001	CALL netcdf_define_header( '3d', netcdf_extend, av )
[1]	1002
[493]	1003	!
[1031]	1004	!-- In case of parallel netCDF output, create flag file which tells
[493]	1005	!-- combine_plot_fields that nothing is to do.
[1031]	1006	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	1007	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1008	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1009	CLOSE( 99 )
	1010	ENDIF
	1011
[1]	1012	ENDIF
	1013
	1014
	1015	CASE ( 107 )
	1016	!
[102]	1017	!-- Set filename
[1779]	1018	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
[102]	1019
	1020	!
[1031]	1021	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1022	!-- be opened for extension, if its variables match the actual run.
[102]	1023	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1024
	1025	IF ( netcdf_extend ) THEN
	1026	!
[1031]	1027	!-- Open an existing netCDF file for output
[1783]	1028	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
[263]	1029
[1]	1030	!
	1031	!-- Read header information and set all ids. If there is a mismatch
	1032	!-- between the previuos and the actual run, netcdf_extend is returned
	1033	!-- as .FALSE.
[1783]	1034	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1035
	1036	!
	1037	!-- Remove the local file, if it can not be extended
	1038	IF ( .NOT. netcdf_extend ) THEN
	1039	nc_stat = NF90_CLOSE( id_set_sp )
[1783]	1040	CALL netcdf_handle_error( 'check_open', 39 )
[102]	1041	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1042	ENDIF
	1043
	1044	ENDIF
	1045
	1046	IF ( .NOT. netcdf_extend ) THEN
	1047	!
[1031]	1048	!-- Create a new netCDF output file with requested netCDF format
[1783]	1049	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
[1]	1050	!
	1051	!-- Define the header
[1783]	1052	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
[1]	1053
	1054	ENDIF
	1055
	1056
	1057	CASE ( 108 )
	1058
	1059	IF ( myid_char == '' ) THEN
[1779]	1060	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
[1]	1061	ELSE
[1320]	1062	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
[105]	1063	myid_char
[1]	1064	ENDIF
	1065	!
[1031]	1066	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1067	!-- be opened for extension, if its variables match the actual run.
	1068	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1069
	1070	IF ( netcdf_extend ) THEN
	1071	!
[1031]	1072	!-- Open an existing netCDF file for output
[1783]	1073	CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
[1]	1074	!
	1075	!-- Read header information and set all ids. If there is a mismatch
	1076	!-- between the previuos and the actual run, netcdf_extend is returned
	1077	!-- as .FALSE.
[1783]	1078	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1079
	1080	!
	1081	!-- Remove the local file, if it can not be extended
	1082	IF ( .NOT. netcdf_extend ) THEN
	1083	nc_stat = NF90_CLOSE( id_set_prt )
[1783]	1084	CALL netcdf_handle_error( 'check_open', 42 )
[1745]	1085	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1086	ENDIF
	1087
	1088	ENDIF
	1089
	1090	IF ( .NOT. netcdf_extend ) THEN
	1091
	1092	!
	1093	!-- For runs on multiple processors create the subdirectory
	1094	IF ( myid_char /= '' ) THEN
[1320]	1095	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
[1]	1096	THEN ! needs modification in case of non-extendable sets
[1320]	1097	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1098	TRIM( coupling_char ) // '/' )
[1]	1099	ENDIF
[1804]	1100	#if defined( __parallel )
[807]	1101	!
[1]	1102	!-- Set a barrier in order to allow that all other processors in the
	1103	!-- directory created by PE0 can open their file
	1104	CALL MPI_BARRIER( comm2d, ierr )
	1105	#endif
	1106	ENDIF
	1107
	1108	!
[1031]	1109	!-- Create a new netCDF output file with requested netCDF format
[1783]	1110	CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
[519]	1111
	1112	!
[1]	1113	!-- Define the header
[1783]	1114	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
[1]	1115
	1116	ENDIF
	1117
	1118	CASE ( 109 )
	1119	!
[102]	1120	!-- Set filename
[1779]	1121	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
[102]	1122
	1123	!
[1031]	1124	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1125	!-- be opened for extension, if its variables match the actual run.
[102]	1126	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1127
	1128	IF ( netcdf_extend ) THEN
	1129	!
[1031]	1130	!-- Open an existing netCDF file for output
[1783]	1131	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
[1]	1132	!
	1133	!-- Read header information and set all ids. If there is a mismatch
	1134	!-- between the previuos and the actual run, netcdf_extend is returned
	1135	!-- as .FALSE.
[1783]	1136	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1137
	1138	!
	1139	!-- Remove the local file, if it can not be extended
	1140	IF ( .NOT. netcdf_extend ) THEN
	1141	nc_stat = NF90_CLOSE( id_set_pts )
[1783]	1142	CALL netcdf_handle_error( 'check_open', 394 )
[102]	1143	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1144	ENDIF
	1145
	1146	ENDIF
	1147
	1148	IF ( .NOT. netcdf_extend ) THEN
	1149	!
[1031]	1150	!-- Create a new netCDF output file with requested netCDF format
[1783]	1151	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
[1]	1152	!
	1153	!-- Define the header
[1783]	1154	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
[1]	1155
	1156	ENDIF
[410]	1157
[1468]	1158
	1159	!
	1160	!-- Progress file that is used by the PALM watchdog
	1161	CASE ( 117 )
	1162
[1779]	1163	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
	1164	STATUS='REPLACE', FORM='FORMATTED' )
[1957]	1165	!
	1166	!-- nc-file for virtual flight measurements
	1167	CASE ( 199 )
	1168	!
	1169	!-- Set filename
	1170	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
[1468]	1171
[1957]	1172	!
	1173	!-- Inquire, if there is a netCDF file from a previuos run. This should
	1174	!-- be opened for extension, if its variables match the actual run.
	1175	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1468]	1176
[1957]	1177	IF ( netcdf_extend ) THEN
	1178	!
	1179	!-- Open an existing netCDF file for output
	1180	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
	1181	!
	1182	!-- Read header information and set all ids. If there is a mismatch
	1183	!-- between the previuos and the actual run, netcdf_extend is returned
	1184	!-- as .FALSE.
	1185	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1186
	1187	!
	1188	!-- Remove the local file, if it can not be extended
	1189	IF ( .NOT. netcdf_extend ) THEN
	1190	nc_stat = NF90_CLOSE( id_set_fl )
	1191	CALL netcdf_handle_error( 'check_open', 533 )
	1192	CALL local_system( 'rm ' // TRIM( filename ) )
	1193	ENDIF
	1194
	1195	ENDIF
	1196
	1197	IF ( .NOT. netcdf_extend ) THEN
	1198	!
	1199	!-- Create a new netCDF output file with requested netCDF format
	1200	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
	1201	!
	1202	!-- Define the header
	1203	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
	1204
	1205	ENDIF
	1206
	1207
[564]	1208	CASE ( 201:200+2*max_masks )
[410]	1209	!
	1210	!-- Set filename depending on unit number
[564]	1211	IF ( file_id <= 200+max_masks ) THEN
	1212	mid = file_id - 200
[410]	1213	WRITE ( mask_char,'(I2.2)') mid
[1779]	1214	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // &
	1215	TRIM( coupling_char )
[410]	1216	av = 0
	1217	ELSE
[564]	1218	mid = file_id - (200+max_masks)
[410]	1219	WRITE ( mask_char,'(I2.2)') mid
[1320]	1220	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
[1779]	1221	TRIM( coupling_char )
[410]	1222	av = 1
	1223	ENDIF
	1224	!
[1031]	1225	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1226	!-- be opened for extension, if its dimensions and variables match the
	1227	!-- actual run.
	1228	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1229
	1230	IF ( netcdf_extend ) THEN
	1231	!
[1031]	1232	!-- Open an existing netCDF file for output
[1783]	1233	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
[1031]	1234	.TRUE., 456 )
[410]	1235	!
	1236	!-- Read header information and set all ids. If there is a mismatch
	1237	!-- between the previuos and the actual run, netcdf_extend is returned
	1238	!-- as .FALSE.
[1783]	1239	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[1]	1240
[410]	1241	!
	1242	!-- Remove the local file, if it can not be extended
	1243	IF ( .NOT. netcdf_extend ) THEN
	1244	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[1783]	1245	CALL netcdf_handle_error( 'check_open', 457 )
[410]	1246	CALL local_system('rm ' // TRIM( filename ) )
	1247	ENDIF
[1]	1248
[410]	1249	ENDIF
	1250
	1251	IF ( .NOT. netcdf_extend ) THEN
[1]	1252	!
[1031]	1253	!-- Create a new netCDF output file with requested netCDF format
[1783]	1254	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1255	!
[410]	1256	!-- Define the header
[1783]	1257	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
[410]	1258
	1259	ENDIF
	1260
	1261
	1262	#else
	1263
[564]	1264	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1265
	1266	!
[1]	1267	!-- Nothing is done in case of missing netcdf support
	1268	RETURN
	1269
	1270	#endif
	1271
	1272	CASE DEFAULT
	1273
[247]	1274	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1275	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1276
	1277	END SELECT
	1278
	1279	!
	1280	!-- Set open flag
	1281	openfile(file_id)%opened = .TRUE.
	1282
	1283	!
	1284	!-- Formats
[1320]	1285	3300 FORMAT ('#'/ &
	1286	'coord 1 file=',A,' filetype=unformatted'/ &
	1287	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1288	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
[1]	1289	'#')
	1290	4000 FORMAT ('# ',A)
[1320]	1291	5000 FORMAT ('# ',A/ &
	1292	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1293	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1294	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
[1]	1295	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
[1320]	1296	8000 FORMAT (A/ &
[1359]	1297	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1298	'sPE sent/recv nPE sent/recv max # of parts '/ &
	1299	109('-'))
[1]	1300
	1301	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |