Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 182

Last change on this file since 182 was 146, checked in by raasch, 17 years ago
further updates for turbulent inflow: PE-grid change for restart is working
Property svn:keywords set to `Id`
File size: 45.8 KB

Rev	Line
[1]	1	SUBROUTINE check_open( file_id )
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[143]	6	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
[146]	7	! because only this file contains the global variables,
	8	! myid_char_14 removed
[1]	9	!
	10	! Former revisions:
	11	! -----------------
[3]	12	! $Id: check_open.f90 146 2008-01-17 13:08:34Z raasch $
[77]	13	!
[139]	14	! 120 2007-10-17 11:54:43Z raasch
	15	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
	16	!
[110]	17	! 105 2007-08-08 07:12:55Z raasch
	18	! Different filenames are used in case of a coupled simulation,
	19	! coupling_char added to all relevant filenames
	20	!
[83]	21	! 82 2007-04-16 15:40:52Z raasch
	22	! Call of local_getenv removed, preprocessor directives for old systems removed
	23	!
[77]	24	! 46 2007-03-05 06:00:47Z raasch
	25	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	26	!
[3]	27	! RCS Log replace by Id keyword, revision history cleaned up
	28	!
[1]	29	! Revision 1.44 2006/08/22 13:48:34 raasch
	30	! xz and yz cross sections now up to nzt+1
	31	!
	32	! Revision 1.1 1997/08/11 06:10:55 raasch
	33	! Initial revision
	34	!
	35	!
	36	! Description:
	37	! ------------
	38	! Check if file unit is open. If not, open file and, if necessary, write a
	39	! header or start other initializing actions, respectively.
	40	!------------------------------------------------------------------------------!
	41
	42	USE array_kind
	43	USE arrays_3d
	44	USE control_parameters
	45	USE grid_variables
	46	USE indices
	47	USE netcdf_control
	48	USE particle_attributes
	49	USE pegrid
	50	USE profil_parameter
	51	USE statistics
	52
	53	IMPLICIT NONE
	54
	55	CHARACTER (LEN=2) :: suffix
[82]	56	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	57	CHARACTER (LEN=30) :: filename
	58	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	59	avs_data_file_localname
	60	CHARACTER (LEN=80) :: rtext
	61	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	62	batch_scp, zeile
	63	CHARACTER (LEN=400) :: command
	64
	65	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
	66	j, k, legpos = 1, timodex = 1
	67	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
	68
	69	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	70	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	71	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	72
	73	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	74	sizex = 250.0, sizey = 40.0, texfac = 1.5
	75
	76	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	77	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	78
	79
	80	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
	81	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
	82	rand, rlegfak, sizex, sizey, texfac, &
	83	timodex, twoxa, twoya, xtext
	84
	85
	86	!
	87	!-- Immediate return if file already open
	88	IF ( openfile(file_id)%opened ) RETURN
	89
	90	!
	91	!-- Only certain files are allowed to be re-opened
	92	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	93	!-- has not been checked so far, if it works!
	94	IF ( openfile(file_id)%opened_before ) THEN
	95	SELECT CASE ( file_id )
[143]	96	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	97	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
	98	IF ( myid == 0 ) PRINT*, '+++ check_open: re-open of unit ', &
	99	' 14 is not verified. Please check results!'
	100	ENDIF
[143]	101
[1]	102	CASE DEFAULT
	103	IF ( myid == 0 ) THEN
	104	PRINT*, '+++ check_open: re-opening of file-id ', file_id, &
	105	' is not allowed'
	106	ENDIF
	107	RETURN
[143]	108
[1]	109	END SELECT
	110	ENDIF
	111
	112	!
	113	!-- Check if file may be opened on the relevant PE
	114	SELECT CASE ( file_id )
	115
	116	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 101:107, 109, 111:113, &
	117	116 )
	118
	119	IF ( myid /= 0 ) THEN
	120	PRINT*,'+++ check_open: opening file-id ',file_id, &
	121	' not allowed for PE ',myid
	122	#if defined( __parallel )
	123	CALL MPI_ABORT( comm2d, 9999, ierr )
	124	#else
	125	CALL local_stop
	126	#endif
	127	ENDIF
	128
	129	CASE ( 21, 22, 23 )
	130
	131	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	132	IF ( myid /= 0 ) THEN
	133	PRINT*,'+++ check_open: opening file-id ',file_id, &
	134	' not allowed for PE ',myid
	135	#if defined( __parallel )
	136	CALL MPI_ABORT( comm2d, 9999, ierr )
	137	#else
	138	CALL local_stop
	139	#endif
	140	ENDIF
	141	ENDIF
	142
	143	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	144
	145	!
	146	!-- File-ids that are used temporarily in other routines
	147	PRINT*,'+++ check_open: opening file-id ',file_id, &
	148	' is not allowed since it is used otherwise'
	149
	150	END SELECT
	151
	152	!
	153	!-- Open relevant files
	154	SELECT CASE ( file_id )
	155
	156	CASE ( 11 )
	157
[102]	158	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	159	STATUS='OLD' )
[1]	160
	161	CASE ( 13 )
	162
	163	IF ( myid_char == '' ) THEN
[102]	164	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	165	FORM='UNFORMATTED', STATUS='OLD' )
[1]	166	ELSE
[143]	167	!
	168	!-- First opening of unit 13 openes file _0000 on all PEs because only
	169	!-- this file contains the global variables
	170	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	171	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	172	FORM='UNFORMATTED', STATUS='OLD' )
	173	ELSE
	174	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	175	FORM='UNFORMATTED', STATUS='OLD' )
	176	ENDIF
[1]	177	ENDIF
	178
	179	CASE ( 14 )
	180
	181	IF ( myid_char == '' ) THEN
[102]	182	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	183	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	184	ELSE
	185	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	186	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	187	ENDIF
	188	#if defined( __parallel )
	189	!
	190	!-- Set a barrier in order to allow that all other processors in the
	191	!-- directory created by PE0 can open their file
	192	CALL MPI_BARRIER( comm2d, ierr )
	193	#endif
[146]	194	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[102]	195	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	196	ENDIF
	197
	198	CASE ( 15 )
	199
[102]	200	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	201
	202	CASE ( 16 )
	203
[102]	204	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	205
	206	CASE ( 17 )
	207
[102]	208	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	209
	210	CASE ( 18 )
	211
[102]	212	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	213
	214	CASE ( 19 )
	215
[102]	216	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	217
	218	CASE ( 20 )
	219
	220	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	221	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	222	ENDIF
	223	IF ( myid_char == '' ) THEN
[105]	224	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	225	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	226	ELSE
	227	#if defined( __parallel )
	228	!
	229	!-- Set a barrier in order to allow that all other processors in the
	230	!-- directory created by PE0 can open their file
	231	CALL MPI_BARRIER( comm2d, ierr )
	232	#endif
[105]	233	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	234	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	235	ENDIF
	236
	237	CASE ( 21 )
	238
	239	IF ( data_output_2d_on_each_pe ) THEN
[105]	240	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	241	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	242	ELSE
[102]	243	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	244	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	245	ENDIF
	246
	247	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	248	!
	249	!-- Output for combine_plot_fields
	250	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	251	WRITE (21) -1, nx+1, -1, ny+1 ! total array size
	252	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	253	ENDIF
	254	!
	255	!-- Determine and write ISO2D coordiante header
	256	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	257	hu = 0.0
	258	ho = (ny+1) * dy
	259	DO i = 1, ny
	260	eta(i) = REAL( i ) / ( ny + 1.0 )
	261	ENDDO
	262	eta(0) = 0.0
	263	eta(ny+1) = 1.0
	264
	265	WRITE (21) dx,eta,hu,ho
	266	DEALLOCATE( eta, ho, hu )
	267
	268	!
	269	!-- Create output file for local parameters
	270	IF ( iso2d_output ) THEN
[102]	271	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	272	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	273	openfile(27)%opened = .TRUE.
	274	ENDIF
	275
	276	ENDIF
	277
	278	CASE ( 22 )
	279
	280	IF ( data_output_2d_on_each_pe ) THEN
[105]	281	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	282	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	283	ELSE
[102]	284	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	285	POSITION='APPEND' )
	286	ENDIF
	287
	288	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	289	!
	290	!-- Output for combine_plot_fields
	291	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	292	WRITE (22) -1, nx+1, 0, nz+1 ! total array size
	293	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	294	ENDIF
	295	!
	296	!-- Determine and write ISO2D coordiante header
	297	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	298	hu = 0.0
	299	ho = zu(nz+1)
	300	DO i = 1, nz
	301	eta(i) = REAL( zu(i) ) / zu(nz+1)
	302	ENDDO
	303	eta(0) = 0.0
	304	eta(nz+1) = 1.0
	305
	306	WRITE (22) dx,eta,hu,ho
	307	DEALLOCATE( eta, ho, hu )
	308	!
	309	!-- Create output file for local parameters
[102]	310	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	311	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	312	openfile(28)%opened = .TRUE.
	313
	314	ENDIF
	315
	316	CASE ( 23 )
	317
	318	IF ( data_output_2d_on_each_pe ) THEN
[105]	319	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	320	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	321	ELSE
[102]	322	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	323	POSITION='APPEND' )
	324	ENDIF
	325
	326	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	327	!
	328	!-- Output for combine_plot_fields
	329	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
	330	WRITE (23) -1, ny+1, 0, nz+1 ! total array size
	331	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	332	ENDIF
	333	!
	334	!-- Determine and write ISO2D coordiante header
	335	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	336	hu = 0.0
	337	ho = zu(nz+1)
	338	DO i = 1, nz
	339	eta(i) = REAL( zu(i) ) / zu(nz+1)
	340	ENDDO
	341	eta(0) = 0.0
	342	eta(nz+1) = 1.0
	343
	344	WRITE (23) dx,eta,hu,ho
	345	DEALLOCATE( eta, ho, hu )
	346	!
	347	!-- Create output file for local parameters
[102]	348	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	349	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	350	openfile(29)%opened = .TRUE.
	351
	352	ENDIF
	353
	354	CASE ( 30 )
	355
[105]	356	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	357	FORM='UNFORMATTED' )
[1]	358	!
	359	!-- Write coordinate file for AVS
	360	IF ( myid == 0 ) THEN
	361	#if defined( __parallel )
	362	!
	363	!-- Specifications for combine_plot_fields
	364	IF ( .NOT. do3d_compress ) THEN
	365	WRITE ( 30 ) -1,nx+1,-1,ny+1,0,nz_do3d
	366	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	367	ENDIF
	368	#endif
	369	!
	370	!-- Write coordinate file for AVS:
	371	!-- First determine file names (including cyle numbers) of AVS files on
	372	!-- target machine (to which the files are to be transferred).
	373	!-- Therefore path information has to be obtained first.
	374	IF ( avs_output ) THEN
[82]	375	iaddres = LEN_TRIM( return_addres )
	376	iusern = LEN_TRIM( return_username )
[1]	377
	378	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	379	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	380	.NOT. avs_data_file_found )
	381
	382	READ ( 3, '(A)', END=1 ) zeile
	383
	384	SELECT CASE ( zeile(1:11) )
	385
	386	CASE ( 'PLOT3D_COOR' )
	387	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	388	avs_coor_file_localname
	389	avs_coor_file_found = .TRUE.
	390
	391	CASE ( 'PLOT3D_DATA' )
	392	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	393	avs_data_file_localname
	394	avs_data_file_found = .TRUE.
	395
	396	CASE DEFAULT
	397	READ ( 3, '(A/A)' ) zeile, zeile
	398
	399	END SELECT
	400
	401	ENDDO
	402	!
	403	!-- Now the cycle numbers on the remote machine must be obtained
	404	!-- using batch_scp
	405	1 CLOSE ( 3 )
	406	IF ( .NOT. avs_coor_file_found .OR. &
	407	.NOT. avs_data_file_found ) THEN
	408	PRINT*, '+++ check_open: no filename for AVS-data-file ', &
	409	'found in MRUN-config-file'
	410	PRINT*, ' filename in FLD-file set to ', &
	411	'"unknown"'
	412
	413	avs_coor_file = 'unknown'
	414	avs_data_file = 'unknown'
	415	ELSE
	416	get_filenames = .TRUE.
	417	IF ( TRIM( host ) == 'hpmuk' .OR. &
	418	TRIM( host ) == 'lcmuk' ) THEN
	419	batch_scp = '/home/raasch/pub/batch_scp'
	420	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	421	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	422	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	423	TRIM( host ) == 'ibmb' ) THEN
	424	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	425	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	426	batch_scp = '/home/nhbksira/pub/batch_scp'
	427	ELSE
	428	PRINT*,'+++ check_open: no path for batch_scp on host "',&
	429	TRIM( host ), '"'
	430	get_filenames = .FALSE.
	431	ENDIF
	432
	433	IF ( get_filenames ) THEN
	434	!
	435	!-- Determine the coordinate file name.
	436	!-- /etc/passwd serves as Dummy-Datei, because it is not
	437	!-- really transferred.
	438	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	439	return_username(1:iusern) // ' ' // &
[1]	440	return_addres(1:iaddres) // ' /etc/passwd "' // &
	441	TRIM( avs_coor_file_catalog ) // '" ' // &
	442	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	443
	444	CALL local_system( command )
	445	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	446	READ ( 3, '(A)' ) avs_coor_file
	447	CLOSE ( 3 )
	448	!
	449	!-- Determine the data file name
	450	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	451	return_username(1:iusern) // ' ' // &
[1]	452	return_addres(1:iaddres) // ' /etc/passwd "' // &
	453	TRIM( avs_data_file_catalog ) // '" ' // &
	454	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	455
	456	CALL local_system( command )
	457	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	458	READ ( 3, '(A)' ) avs_data_file
	459	CLOSE ( 3 )
	460
	461	ELSE
	462
	463	avs_coor_file = 'unknown'
	464	avs_data_file = 'unknown'
	465
	466	ENDIF
	467
	468	ENDIF
	469
	470	!
	471	!-- Output of the coordinate file description for FLD-file
	472	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	473	openfile(33)%opened = .TRUE.
	474	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
	475	TRIM( avs_coor_file ), (nx+2)*4, &
	476	TRIM( avs_coor_file ), (nx+2)4+(ny+2)4
	477
	478
	479	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	480	DO i = 0, nx+1
	481	xkoor(i) = i * dx
	482	ENDDO
	483	DO j = 0, ny+1
	484	ykoor(j) = j * dy
	485	ENDDO
	486	DO k = 0, nz_do3d
	487	zkoor(k) = zu(k)
	488	ENDDO
	489
	490	!
	491	!-- Create and write on AVS coordinate file
	492	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	493	openfile(31)%opened = .TRUE.
	494
	495	WRITE (31) xkoor, ykoor, zkoor
	496	DEALLOCATE( xkoor, ykoor, zkoor )
	497
	498	!
	499	!-- Create FLD file (being written on in close_file)
	500	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	501	openfile(32)%opened = .TRUE.
	502
	503	!
	504	!-- Create flag file for compressed 3D output,
	505	!-- influences output commands in mrun
	506	IF ( do3d_compress ) THEN
	507	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	508	WRITE ( 3, '(1X)' )
	509	CLOSE ( 3 )
	510	ENDIF
	511
	512	ENDIF
	513
	514	ENDIF
	515
	516	!
	517	!-- In case of data compression output of the coordinates of the
	518	!-- corresponding partial array of a PE only once at the top of the file
	519	IF ( avs_output .AND. do3d_compress ) THEN
	520	WRITE ( 30 ) nxl-1, nxr+1, nys-1, nyn+1, nzb, nz_do3d
	521	ENDIF
	522
	523	CASE ( 40:49 )
	524
	525	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
	526	suffix = ''
	527	ELSE
	528	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
	529	ENDIF
[105]	530	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
	531	TRIM( suffix ), &
[102]	532	FORM='FORMATTED' )
[1]	533	!
	534	!-- Write contents comments at the top of the file
	535	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
	536	TRIM( region( file_id - 40 ) )
	537
	538	CASE ( 50:59 )
	539
	540	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	541	suffix = ''
	542	ELSE
	543	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	544	ENDIF
[105]	545	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	546	TRIM( suffix ), &
[102]	547	FORM='FORMATTED', RECL=496 )
[1]	548	!
	549	!-- Write PROFIL parameter file for output of time series
	550	!-- NOTE: To be on the safe side, this output is done at the beginning of
	551	!-- the model run (in case of collapse) and it is repeated in
	552	!-- close_file, then, however, with value ranges for the coordinate
	553	!-- systems
	554	!
	555	!-- Firstly determine the number of the coordinate systems to be drawn
	556	cranz = 0
	557	DO j = 1, 10
	558	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	559	ENDDO
	560	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	561	TRIM( region( file_id - 50 ) )
	562	!
	563	!-- Write RAHMEN parameter
[105]	564	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	565	TRIM( suffix ), &
[102]	566	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	567	WRITE ( 90, RAHMEN )
	568	!
	569	!-- Determine and write CROSS parameters for the individual coordinate
	570	!-- systems
	571	DO j = 1, 10
	572	k = cross_ts_number_count(j)
	573	IF ( k /= 0 ) THEN
	574	!
	575	!-- Store curve numbers, colours and line style
	576	klist(1:k) = cross_ts_numbers(1:k,j)
	577	klist(k+1:10) = 999999
	578	cucol(1:k) = linecolors(1:k)
	579	lstyle(1:k) = linestyles(1:k)
	580	!
	581	!-- Write CROSS parameter
	582	WRITE ( 90, CROSS )
	583
	584	ENDIF
	585	ENDDO
	586
	587	CLOSE ( 90 )
	588	!
	589	!-- Write all labels at the top of the data file, but only during the
	590	!-- first run of a sequence of jobs. The following jobs copy the time
	591	!-- series data to the bottom of that file.
	592	IF ( runnr == 0 ) THEN
	593	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	594	' ' // TRIM( region( file_id - 50 ) )
	595	ENDIF
	596
	597
	598	CASE ( 80 )
	599
	600	IF ( myid_char == '' ) THEN
[105]	601	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	602	FORM='FORMATTED', POSITION='APPEND' )
[1]	603	ELSE
	604	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	605	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	606	ENDIF
	607	#if defined( __parallel )
	608	!
	609	!-- Set a barrier in order to allow that thereafter all other
	610	!-- processors in the directory created by PE0 can open their file.
	611	!-- WARNING: The following barrier will lead to hanging jobs, if
	612	!-- check_open is first called from routine
	613	!-- allocate_prt_memory!
	614	IF ( .NOT. openfile(80)%opened_before ) THEN
	615	CALL MPI_BARRIER( comm2d, ierr )
	616	ENDIF
	617	#endif
[105]	618	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	619	myid_char, &
[102]	620	FORM='FORMATTED', POSITION='APPEND' )
[1]	621	ENDIF
	622
	623	IF ( .NOT. openfile(80)%opened_before ) THEN
	624	WRITE ( 80, 8000 ) TRIM( run_description_header )
	625	ENDIF
	626
	627	CASE ( 81 )
	628
[102]	629	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	630	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	631
	632	CASE ( 82 )
	633
[102]	634	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	635	POSITION = 'APPEND' )
	636
	637	CASE ( 83 )
	638
[102]	639	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	640	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	641
	642	CASE ( 84 )
	643
[102]	644	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	645	POSITION='APPEND' )
	646
	647	CASE ( 85 )
	648
	649	IF ( myid_char == '' ) THEN
[105]	650	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	651	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	652	ELSE
	653	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	654	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	655	ENDIF
	656	#if defined( __parallel )
	657	!
	658	!-- Set a barrier in order to allow that thereafter all other
	659	!-- processors in the directory created by PE0 can open their file
	660	CALL MPI_BARRIER( comm2d, ierr )
	661	#endif
[105]	662	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	663	myid_char, &
[102]	664	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	665	ENDIF
	666
	667	IF ( .NOT. openfile(85)%opened_before ) THEN
	668	WRITE ( 85 ) run_description_header
	669	!
	670	!-- Attention: change version number whenever the output format on
	671	!-- unit 85 is changed (see also in routine advec_particles)
	672	rtext = 'data format version 3.0'
	673	WRITE ( 85 ) rtext
	674	WRITE ( 85 ) number_of_particle_groups, &
	675	max_number_of_particle_groups
	676	WRITE ( 85 ) particle_groups
	677	ENDIF
	678
	679	#if defined( __netcdf )
	680	CASE ( 101, 111 )
	681	!
	682	!-- Set filename depending on unit number
	683	IF ( file_id == 101 ) THEN
[102]	684	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	685	av = 0
	686	ELSE
[102]	687	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	688	av = 1
	689	ENDIF
	690	!
	691	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	692	!-- be opened for extension, if its dimensions and variables match the
	693	!-- actual run.
	694	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	695
	696	IF ( netcdf_extend ) THEN
	697	!
	698	!-- Open an existing NetCDF file for output
	699	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
	700	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 20 )
	701	!
	702	!-- Read header information and set all ids. If there is a mismatch
	703	!-- between the previuos and the actual run, netcdf_extend is returned
	704	!-- as .FALSE.
	705	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	706
	707	!
	708	!-- Remove the local file, if it can not be extended
	709	IF ( .NOT. netcdf_extend ) THEN
	710	nc_stat = NF90_CLOSE( id_set_xy(av) )
	711	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 21 )
	712	CALL local_system( 'rm ' // TRIM( filename ) )
	713	ENDIF
	714
	715	ENDIF
	716
	717	IF ( .NOT. netcdf_extend ) THEN
	718	!
	719	!-- Create a new NetCDF output file
	720	IF ( netcdf_64bit ) THEN
	721	#if defined( __netcdf_64bit )
	722	nc_stat = NF90_CREATE( filename, &
	723	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	724	id_set_xy(av) )
	725	#else
	726	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
	727	'offset allowed on this machine'
	728	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	729	#endif
	730	ELSE
	731	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
	732	ENDIF
	733	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 22 )
	734	!
	735	!-- Define the header
	736	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	737
	738	ENDIF
	739
	740	CASE ( 102, 112 )
	741	!
	742	!-- Set filename depending on unit number
	743	IF ( file_id == 102 ) THEN
[102]	744	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	745	av = 0
	746	ELSE
[102]	747	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	748	av = 1
	749	ENDIF
	750	!
	751	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	752	!-- be opened for extension, if its dimensions and variables match the
	753	!-- actual run.
	754	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	755
	756	IF ( netcdf_extend ) THEN
	757	!
	758	!-- Open an existing NetCDF file for output
	759	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
	760	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 23 )
	761	!
	762	!-- Read header information and set all ids. If there is a mismatch
	763	!-- between the previuos and the actual run, netcdf_extend is returned
	764	!-- as .FALSE.
	765	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	766
	767	!
	768	!-- Remove the local file, if it can not be extended
	769	IF ( .NOT. netcdf_extend ) THEN
	770	nc_stat = NF90_CLOSE( id_set_xz(av) )
	771	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 24 )
	772	CALL local_system( 'rm ' // TRIM( filename ) )
	773	ENDIF
	774
	775	ENDIF
	776
	777	IF ( .NOT. netcdf_extend ) THEN
	778	!
	779	!-- Create a new NetCDF output file
	780	IF ( netcdf_64bit ) THEN
	781	#if defined( __netcdf_64bit )
	782	nc_stat = NF90_CREATE( filename, &
	783	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	784	id_set_xz(av) )
	785	#else
	786	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
	787	'offset allowed on this machine'
	788	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	789	#endif
	790	ELSE
	791	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
	792	ENDIF
	793	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 25 )
	794	!
	795	!-- Define the header
	796	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	797
	798	ENDIF
	799
	800	CASE ( 103, 113 )
	801	!
	802	!-- Set filename depending on unit number
	803	IF ( file_id == 103 ) THEN
[102]	804	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	805	av = 0
	806	ELSE
[102]	807	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	808	av = 1
	809	ENDIF
	810	!
	811	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	812	!-- be opened for extension, if its dimensions and variables match the
	813	!-- actual run.
	814	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	815
	816	IF ( netcdf_extend ) THEN
	817	!
	818	!-- Open an existing NetCDF file for output
	819	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
	820	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 26 )
	821	!
	822	!-- Read header information and set all ids. If there is a mismatch
	823	!-- between the previuos and the actual run, netcdf_extend is returned
	824	!-- as .FALSE.
	825	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	826
	827	!
	828	!-- Remove the local file, if it can not be extended
	829	IF ( .NOT. netcdf_extend ) THEN
	830	nc_stat = NF90_CLOSE( id_set_yz(av) )
	831	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 27 )
	832	CALL local_system( 'rm ' // TRIM( filename ) )
	833	ENDIF
	834
	835	ENDIF
	836
	837	IF ( .NOT. netcdf_extend ) THEN
	838	!
	839	!-- Create a new NetCDF output file
	840	IF ( netcdf_64bit ) THEN
	841	#if defined( __netcdf_64bit )
	842	nc_stat = NF90_CREATE( filename, &
	843	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET), &
	844	id_set_yz(av) )
	845	#else
	846	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
	847	'offset allowed on this machine'
	848	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	849	#endif
	850	ELSE
	851	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
	852	ENDIF
	853	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 28 )
	854	!
	855	!-- Define the header
	856	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	857
	858	ENDIF
	859
	860	CASE ( 104 )
	861	!
[102]	862	!-- Set filename
	863	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	864
	865	!
[1]	866	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	867	!-- be opened for extension, if its variables match the actual run.
[102]	868	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	869
	870	IF ( netcdf_extend ) THEN
	871	!
	872	!-- Open an existing NetCDF file for output
[102]	873	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
[1]	874	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 29 )
	875	!
	876	!-- Read header information and set all ids. If there is a mismatch
	877	!-- between the previuos and the actual run, netcdf_extend is returned
	878	!-- as .FALSE.
	879	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	880
	881	!
	882	!-- Remove the local file, if it can not be extended
	883	IF ( .NOT. netcdf_extend ) THEN
	884	nc_stat = NF90_CLOSE( id_set_pr )
	885	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 30 )
[102]	886	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	887	ENDIF
	888
	889	ENDIF
	890
	891	IF ( .NOT. netcdf_extend ) THEN
	892	!
	893	!-- Create a new NetCDF output file
	894	IF ( netcdf_64bit ) THEN
	895	#if defined( __netcdf_64bit )
[102]	896	nc_stat = NF90_CREATE( filename, &
[1]	897	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	898	id_set_pr )
	899	#else
	900	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
	901	'offset allowed on this machine'
[102]	902	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	903	#endif
	904	ELSE
[102]	905	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
[1]	906	ENDIF
	907	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 31 )
	908	!
	909	!-- Define the header
	910	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	911
	912	ENDIF
	913
	914	CASE ( 105 )
	915	!
[102]	916	!-- Set filename
	917	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	918
	919	!
[1]	920	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	921	!-- be opened for extension, if its variables match the actual run.
[102]	922	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	923
	924	IF ( netcdf_extend ) THEN
	925	!
	926	!-- Open an existing NetCDF file for output
[102]	927	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
[1]	928	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 32 )
	929	!
	930	!-- Read header information and set all ids. If there is a mismatch
	931	!-- between the previuos and the actual run, netcdf_extend is returned
	932	!-- as .FALSE.
	933	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	934
	935	!
	936	!-- Remove the local file, if it can not be extended
	937	IF ( .NOT. netcdf_extend ) THEN
	938	nc_stat = NF90_CLOSE( id_set_ts )
	939	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 33 )
[102]	940	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	941	ENDIF
	942
	943	ENDIF
	944
	945	IF ( .NOT. netcdf_extend ) THEN
	946	!
	947	!-- Create a new NetCDF output file
	948	IF ( netcdf_64bit ) THEN
	949	#if defined( __netcdf_64bit )
[102]	950	nc_stat = NF90_CREATE( filename, &
[1]	951	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	952	id_set_ts )
	953	#else
	954	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
	955	'offset allowed on this machine'
[102]	956	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	957	#endif
	958	ELSE
[102]	959	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
[1]	960	ENDIF
	961	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 34 )
	962	!
	963	!-- Define the header
	964	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	965
	966	ENDIF
	967
	968
	969	CASE ( 106, 116 )
	970	!
	971	!-- Set filename depending on unit number
	972	IF ( file_id == 106 ) THEN
[102]	973	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	974	av = 0
	975	ELSE
[102]	976	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	977	av = 1
	978	ENDIF
	979	!
	980	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	981	!-- be opened for extension, if its dimensions and variables match the
	982	!-- actual run.
	983	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	984
	985	IF ( netcdf_extend ) THEN
	986	!
	987	!-- Open an existing NetCDF file for output
	988	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
	989	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 35 )
	990	!
	991	!-- Read header information and set all ids. If there is a mismatch
	992	!-- between the previuos and the actual run, netcdf_extend is returned
	993	!-- as .FALSE.
	994	CALL define_netcdf_header( '3d', netcdf_extend, av )
	995
	996	!
	997	!-- Remove the local file, if it can not be extended
	998	IF ( .NOT. netcdf_extend ) THEN
	999	nc_stat = NF90_CLOSE( id_set_3d(av) )
	1000	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 36 )
	1001	CALL local_system('rm ' // TRIM( filename ) )
	1002	ENDIF
	1003
	1004	ENDIF
	1005
	1006	IF ( .NOT. netcdf_extend ) THEN
	1007	!
	1008	!-- Create a new NetCDF output file
[120]	1009	IF ( netcdf_64bit_3d ) THEN
[1]	1010	#if defined( __netcdf_64bit )
	1011	nc_stat = NF90_CREATE( filename, &
	1012	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1013	id_set_3d(av) )
	1014	#else
	1015	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
	1016	'offset allowed on this machine'
	1017	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1018	#endif
	1019	ELSE
	1020	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
	1021	ENDIF
	1022	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 37 )
	1023	!
	1024	!-- Define the header
	1025	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1026
	1027	ENDIF
	1028
	1029
	1030	CASE ( 107 )
	1031	!
[102]	1032	!-- Set filename
	1033	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1034
	1035	!
[1]	1036	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1037	!-- be opened for extension, if its variables match the actual run.
[102]	1038	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1039
	1040	IF ( netcdf_extend ) THEN
	1041	!
	1042	!-- Open an existing NetCDF file for output
[102]	1043	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
[1]	1044	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 38 )
	1045	!
	1046	!-- Read header information and set all ids. If there is a mismatch
	1047	!-- between the previuos and the actual run, netcdf_extend is returned
	1048	!-- as .FALSE.
	1049	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1050
	1051	!
	1052	!-- Remove the local file, if it can not be extended
	1053	IF ( .NOT. netcdf_extend ) THEN
	1054	nc_stat = NF90_CLOSE( id_set_sp )
	1055	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 39 )
[102]	1056	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1057	ENDIF
	1058
	1059	ENDIF
	1060
	1061	IF ( .NOT. netcdf_extend ) THEN
	1062	!
	1063	!-- Create a new NetCDF output file
	1064	IF ( netcdf_64bit ) THEN
	1065	#if defined( __netcdf_64bit )
[102]	1066	nc_stat = NF90_CREATE( filename, &
[1]	1067	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1068	id_set_sp )
	1069	#else
	1070	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
	1071	'offset allowed on this machine'
[102]	1072	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1073	#endif
	1074	ELSE
[102]	1075	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
[1]	1076	ENDIF
	1077	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 40 )
	1078	!
	1079	!-- Define the header
	1080	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1081
	1082	ENDIF
	1083
	1084
	1085	CASE ( 108 )
	1086
	1087	IF ( myid_char == '' ) THEN
[102]	1088	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1089	ELSE
[105]	1090	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1091	myid_char
[1]	1092	ENDIF
	1093	!
	1094	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1095	!-- be opened for extension, if its variables match the actual run.
	1096	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1097
	1098	IF ( netcdf_extend ) THEN
	1099	!
	1100	!-- Open an existing NetCDF file for output
	1101	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
	1102	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 41 )
	1103	!
	1104	!-- Read header information and set all ids. If there is a mismatch
	1105	!-- between the previuos and the actual run, netcdf_extend is returned
	1106	!-- as .FALSE.
	1107	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1108
	1109	!
	1110	!-- Remove the local file, if it can not be extended
	1111	IF ( .NOT. netcdf_extend ) THEN
	1112	nc_stat = NF90_CLOSE( id_set_prt )
	1113	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 42 )
	1114	CALL local_system( 'rm ' // filename )
	1115	ENDIF
	1116
	1117	ENDIF
	1118
	1119	IF ( .NOT. netcdf_extend ) THEN
	1120
	1121	!
	1122	!-- For runs on multiple processors create the subdirectory
	1123	IF ( myid_char /= '' ) THEN
	1124	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1125	THEN ! needs modification in case of non-extendable sets
[102]	1126	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1127	TRIM( coupling_char ) // '/' )
[1]	1128	ENDIF
	1129	#if defined( __parallel )
	1130	!
	1131	!-- Set a barrier in order to allow that all other processors in the
	1132	!-- directory created by PE0 can open their file
	1133	CALL MPI_BARRIER( comm2d, ierr )
	1134	#endif
	1135	ENDIF
	1136
	1137	!
	1138	!-- Create a new NetCDF output file
	1139	IF ( netcdf_64bit ) THEN
	1140	#if defined( __netcdf_64bit )
	1141	nc_stat = NF90_CREATE( filename, &
	1142	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1143	id_set_prt )
	1144	#else
	1145	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
	1146	'offset allowed on this machine'
	1147	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1148	#endif
	1149	ELSE
	1150	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
	1151	ENDIF
	1152	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 43 )
	1153
	1154	!
	1155	!-- Define the header
	1156	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1157
	1158	ENDIF
	1159
	1160	CASE ( 109 )
	1161	!
[102]	1162	!-- Set filename
	1163	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1164
	1165	!
[1]	1166	!-- Inquire, if there is a NetCDF file from a previuos run. This should
	1167	!-- be opened for extension, if its variables match the actual run.
[102]	1168	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1169
	1170	IF ( netcdf_extend ) THEN
	1171	!
	1172	!-- Open an existing NetCDF file for output
[102]	1173	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
[1]	1174	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 393 )
	1175	!
	1176	!-- Read header information and set all ids. If there is a mismatch
	1177	!-- between the previuos and the actual run, netcdf_extend is returned
	1178	!-- as .FALSE.
	1179	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1180
	1181	!
	1182	!-- Remove the local file, if it can not be extended
	1183	IF ( .NOT. netcdf_extend ) THEN
	1184	nc_stat = NF90_CLOSE( id_set_pts )
	1185	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 394 )
[102]	1186	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1187	ENDIF
	1188
	1189	ENDIF
	1190
	1191	IF ( .NOT. netcdf_extend ) THEN
	1192	!
	1193	!-- Create a new NetCDF output file
	1194	IF ( netcdf_64bit ) THEN
	1195	#if defined( __netcdf_64bit )
[102]	1196	nc_stat = NF90_CREATE( filename, &
[1]	1197	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
	1198	id_set_pts )
	1199	#else
	1200	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
	1201	'offset allowed on this machine'
[102]	1202	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1203	#endif
	1204	ELSE
[102]	1205	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
[1]	1206	ENDIF
	1207	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 395 )
	1208	!
	1209	!-- Define the header
	1210	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1211
	1212	ENDIF
	1213	#else
	1214
	1215	CASE ( 101:109, 111:113, 116 )
	1216
	1217	!
	1218	!-- Nothing is done in case of missing netcdf support
	1219	RETURN
	1220
	1221	#endif
	1222
	1223	CASE DEFAULT
	1224
	1225	PRINT*,'+++ check_open: no OPEN-statement for file-id ',file_id
	1226	#if defined( __parallel )
	1227	CALL MPI_ABORT( comm2d, 9999, ierr )
	1228	#else
	1229	CALL local_stop
	1230	#endif
	1231
	1232	END SELECT
	1233
	1234	!
	1235	!-- Set open flag
	1236	openfile(file_id)%opened = .TRUE.
	1237
	1238	!
	1239	!-- Formats
	1240	3300 FORMAT ('#'/ &
	1241	'coord 1 file=',A,' filetype=unformatted'/ &
	1242	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1243	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1244	'#')
	1245	4000 FORMAT ('# ',A)
	1246	5000 FORMAT ('# ',A/ &
	1247	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1248	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1249	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1250	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1251	8000 FORMAT (A/ &
	1252	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1253	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1254	103('-'))
	1255
	1256	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |