Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 1280

Last change on this file since 1280 was 1107, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 46.1 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1107]	22	!
[1]	23	!
	24	! Former revisions:
	25	! -----------------
[3]	26	! $Id: check_open.f90 1107 2013-03-04 06:23:14Z raasch $
[810]	27	!
[1107]	28	! 1106 2013-03-04 05:31:38Z raasch
	29	! array_kind renamed precision_kind
	30	!
[1093]	31	! 1092 2013-02-02 11:24:22Z raasch
	32	! unused variables removed
	33	!
[1037]	34	! 1036 2012-10-22 13:43:42Z raasch
	35	! code put under GPL (PALM 3.9)
	36	!
[1035]	37	! 1031 2012-10-19 14:35:30Z raasch
	38	! netCDF4 without parallel file support implemented,
	39	! opening of netCDF files are done by new routines create_netcdf_file and
	40	! open_write_netcdf_file
	41	!
[965]	42	! 964 2012-07-26 09:14:24Z raasch
	43	! old profil-units (40:49) removed,
	44	! append feature removed from unit 14
	45	!
[850]	46	! 849 2012-03-15 10:35:09Z raasch
	47	! comment changed
	48	!
[810]	49	! 809 2012-01-30 13:32:58Z maronga
	50	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	51	!
[808]	52	! 807 2012-01-25 11:53:51Z maronga
	53	! New cpp directive "__check" implemented which is used by check_namelist_files
	54	!
[766]	55	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
[77]	56	!
[668]	57	! 667 2010-12-23 12:06:00Z suehring/gryschka
	58	! Output of total array size was adapted to nbgp.
	59	!
[601]	60	! 600 2010-11-24 16:10:51Z raasch
	61	! bugfix in opening of cross section netcdf-files (parallel opening with
	62	! netcdf4 only works for netcdf_data_format > 2)
	63	!
[565]	64	! 564 2010-09-30 13:18:59Z helmke
	65	! start number of mask output files changed to 201, netcdf message identifiers
	66	! of masked output changed
	67	!
[520]	68	! 519 2010-03-19 05:30:02Z raasch
[1031]	69	! netCDF4 support for particle data
[520]	70	!
[494]	71	! 493 2010-03-01 08:30:24Z raasch
[1031]	72	! netCDF4 support (parallel output)
[494]	73	!
[449]	74	! 410 2009-12-04 17:05:40Z letzel
	75	! masked data output
	76	!
[392]	77	! 277 2009-03-31 09:13:47Z heinze
[1031]	78	! Output of netCDF messages with aid of message handling routine.
[392]	79	! Output of messages replaced by message handling routine
	80	!
[198]	81	! 146 2008-01-17 13:08:34Z raasch
	82	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	83	! because only this file contains the global variables,
	84	! myid_char_14 removed
	85	!
[139]	86	! 120 2007-10-17 11:54:43Z raasch
[1031]	87	! Status of 3D-volume netCDF data file only depends on switch netcdf_64bit_3d
[139]	88	!
[110]	89	! 105 2007-08-08 07:12:55Z raasch
	90	! Different filenames are used in case of a coupled simulation,
	91	! coupling_char added to all relevant filenames
	92	!
[83]	93	! 82 2007-04-16 15:40:52Z raasch
	94	! Call of local_getenv removed, preprocessor directives for old systems removed
	95	!
[77]	96	! 46 2007-03-05 06:00:47Z raasch
	97	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	98	!
[3]	99	! RCS Log replace by Id keyword, revision history cleaned up
	100	!
[1]	101	! Revision 1.44 2006/08/22 13:48:34 raasch
	102	! xz and yz cross sections now up to nzt+1
	103	!
	104	! Revision 1.1 1997/08/11 06:10:55 raasch
	105	! Initial revision
	106	!
	107	!
	108	! Description:
	109	! ------------
	110	! Check if file unit is open. If not, open file and, if necessary, write a
	111	! header or start other initializing actions, respectively.
	112	!------------------------------------------------------------------------------!
	113
	114	USE arrays_3d
	115	USE control_parameters
	116	USE grid_variables
	117	USE indices
	118	USE netcdf_control
	119	USE particle_attributes
	120	USE pegrid
[1106]	121	USE precision_kind
[1]	122	USE profil_parameter
	123	USE statistics
	124
	125	IMPLICIT NONE
	126
[410]	127	CHARACTER (LEN=2) :: mask_char, suffix
[82]	128	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	129	CHARACTER (LEN=30) :: filename
	130	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	131	avs_data_file_localname
	132	CHARACTER (LEN=80) :: rtext
	133	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	134	batch_scp, zeile
	135	CHARACTER (LEN=400) :: command
	136
[1092]	137	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, iusern, &
[1]	138	j, k, legpos = 1, timodex = 1
[1092]	139	INTEGER, DIMENSION(10) :: klist
[1]	140
	141	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	142	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	143	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	144
	145	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	146	sizex = 250.0, sizey = 40.0, texfac = 1.5
	147
	148	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	149	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	150
	151
	152	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
[1092]	153	NAMELIST /CROSS/ ansx, ansy, grid, gwid, klist, legpos, &
[1]	154	rand, rlegfak, sizex, sizey, texfac, &
	155	timodex, twoxa, twoya, xtext
	156
	157
	158	!
	159	!-- Immediate return if file already open
	160	IF ( openfile(file_id)%opened ) RETURN
	161
[809]	162	#if ! defined ( __check )
[1]	163	!
	164	!-- Only certain files are allowed to be re-opened
	165	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	166	!-- has not been checked so far, if it works!
	167	IF ( openfile(file_id)%opened_before ) THEN
	168	SELECT CASE ( file_id )
[143]	169	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	170	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	171	message_string = 're-open of unit ' // &
[274]	172	'14 is not verified. Please check results!'
[247]	173	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	174	ENDIF
[143]	175
[1]	176	CASE DEFAULT
[247]	177	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	178	' is not allowed'
[247]	179	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	180
[1]	181	RETURN
[143]	182
[1]	183	END SELECT
	184	ENDIF
[807]	185	#endif
[1]	186
	187	!
	188	!-- Check if file may be opened on the relevant PE
	189	SELECT CASE ( file_id )
	190
[964]	191	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109 )
[410]	192
[493]	193	IF ( myid /= 0 ) THEN
	194	WRITE( message_string, * ) 'opening file-id ',file_id, &
	195	' not allowed for PE ',myid
	196	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	197	ENDIF
	198
[564]	199	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	200
[1031]	201	IF ( netcdf_data_format < 5 ) THEN
[247]	202
[410]	203	IF ( myid /= 0 ) THEN
	204	WRITE( message_string, * ) 'opening file-id ',file_id, &
	205	' not allowed for PE ',myid
	206	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	207	ENDIF
	208
[493]	209	ENDIF
[1]	210
	211	CASE ( 21, 22, 23 )
	212
	213	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	214	IF ( myid /= 0 ) THEN
[247]	215	WRITE( message_string, * ) 'opening file-id ',file_id, &
	216	' not allowed for PE ',myid
[277]	217	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	218	END IF
[1]	219	ENDIF
	220
	221	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	222
	223	!
	224	!-- File-ids that are used temporarily in other routines
[247]	225	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	226	' is not allowed since it is used otherwise'
[247]	227	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	228
[1]	229	END SELECT
	230
	231	!
	232	!-- Open relevant files
	233	SELECT CASE ( file_id )
	234
	235	CASE ( 11 )
	236
[807]	237	#if defined ( __check )
	238	!
	239	!-- In case of a prior parameter file check, the p3d data is stored in
	240	!-- PARIN, while the p3df is stored in PARINF. This only applies to
	241	!-- check_namelist_files!
	242	IF ( check_restart == 2 ) THEN
	243	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
	244	STATUS='OLD' )
	245	ELSE
	246	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	247	STATUS='OLD' )
	248	END IF
	249	#else
	250
[102]	251	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	252	STATUS='OLD' )
[807]	253	#endif
[1]	254
	255	CASE ( 13 )
	256
	257	IF ( myid_char == '' ) THEN
[102]	258	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	259	FORM='UNFORMATTED', STATUS='OLD' )
[1]	260	ELSE
[143]	261	!
	262	!-- First opening of unit 13 openes file _0000 on all PEs because only
	263	!-- this file contains the global variables
	264	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	265	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	266	FORM='UNFORMATTED', STATUS='OLD' )
	267	ELSE
	268	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	269	FORM='UNFORMATTED', STATUS='OLD' )
	270	ENDIF
[1]	271	ENDIF
	272
	273	CASE ( 14 )
	274
	275	IF ( myid_char == '' ) THEN
[102]	276	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	277	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	278	ELSE
	279	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	280	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	281	ENDIF
[809]	282	#if defined( __parallel ) && ! defined ( __check )
[1]	283	!
	284	!-- Set a barrier in order to allow that all other processors in the
	285	!-- directory created by PE0 can open their file
	286	CALL MPI_BARRIER( comm2d, ierr )
	287	#endif
[146]	288	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[887]	289	FORM='UNFORMATTED' )
[1]	290	ENDIF
	291
	292	CASE ( 15 )
	293
[102]	294	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	295
	296	CASE ( 16 )
	297
[102]	298	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	299
	300	CASE ( 17 )
	301
[102]	302	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	303
	304	CASE ( 18 )
	305
[102]	306	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	307
	308	CASE ( 19 )
	309
[102]	310	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	311
	312	CASE ( 20 )
	313
	314	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	315	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	316	ENDIF
	317	IF ( myid_char == '' ) THEN
[105]	318	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	319	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	320	ELSE
[809]	321	#if defined( __parallel ) && ! defined ( __check )
[1]	322	!
	323	!-- Set a barrier in order to allow that all other processors in the
	324	!-- directory created by PE0 can open their file
	325	CALL MPI_BARRIER( comm2d, ierr )
	326	#endif
[105]	327	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	328	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	329	ENDIF
	330
	331	CASE ( 21 )
	332
	333	IF ( data_output_2d_on_each_pe ) THEN
[105]	334	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	335	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	336	ELSE
[102]	337	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	338	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	339	ENDIF
	340
	341	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	342	!
	343	!-- Output for combine_plot_fields
	344	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	345	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	346	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	347	ENDIF
	348	!
	349	!-- Determine and write ISO2D coordiante header
	350	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	351	hu = 0.0
	352	ho = (ny+1) * dy
	353	DO i = 1, ny
	354	eta(i) = REAL( i ) / ( ny + 1.0 )
	355	ENDDO
	356	eta(0) = 0.0
	357	eta(ny+1) = 1.0
	358
	359	WRITE (21) dx,eta,hu,ho
	360	DEALLOCATE( eta, ho, hu )
	361
	362	!
	363	!-- Create output file for local parameters
	364	IF ( iso2d_output ) THEN
[102]	365	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	366	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	367	openfile(27)%opened = .TRUE.
	368	ENDIF
	369
	370	ENDIF
	371
	372	CASE ( 22 )
	373
	374	IF ( data_output_2d_on_each_pe ) THEN
[105]	375	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	376	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	377	ELSE
[102]	378	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	379	POSITION='APPEND' )
	380	ENDIF
	381
	382	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	383	!
	384	!-- Output for combine_plot_fields
	385	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	386	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	387	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	388	ENDIF
	389	!
	390	!-- Determine and write ISO2D coordiante header
	391	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	392	hu = 0.0
	393	ho = zu(nz+1)
	394	DO i = 1, nz
	395	eta(i) = REAL( zu(i) ) / zu(nz+1)
	396	ENDDO
	397	eta(0) = 0.0
	398	eta(nz+1) = 1.0
	399
	400	WRITE (22) dx,eta,hu,ho
	401	DEALLOCATE( eta, ho, hu )
	402	!
	403	!-- Create output file for local parameters
[102]	404	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	405	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	406	openfile(28)%opened = .TRUE.
	407
	408	ENDIF
	409
	410	CASE ( 23 )
	411
	412	IF ( data_output_2d_on_each_pe ) THEN
[105]	413	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	414	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	415	ELSE
[102]	416	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	417	POSITION='APPEND' )
	418	ENDIF
	419
	420	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	421	!
	422	!-- Output for combine_plot_fields
	423	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	424	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	425	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	426	ENDIF
	427	!
	428	!-- Determine and write ISO2D coordiante header
	429	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	430	hu = 0.0
	431	ho = zu(nz+1)
	432	DO i = 1, nz
	433	eta(i) = REAL( zu(i) ) / zu(nz+1)
	434	ENDDO
	435	eta(0) = 0.0
	436	eta(nz+1) = 1.0
	437
	438	WRITE (23) dx,eta,hu,ho
	439	DEALLOCATE( eta, ho, hu )
	440	!
	441	!-- Create output file for local parameters
[102]	442	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	443	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	444	openfile(29)%opened = .TRUE.
	445
	446	ENDIF
	447
	448	CASE ( 30 )
	449
[105]	450	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	451	FORM='UNFORMATTED' )
[1]	452	!
	453	!-- Write coordinate file for AVS
	454	IF ( myid == 0 ) THEN
	455	#if defined( __parallel )
	456	!
	457	!-- Specifications for combine_plot_fields
	458	IF ( .NOT. do3d_compress ) THEN
[667]	459	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
[1]	460	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	461	ENDIF
	462	#endif
	463	!
	464	!-- Write coordinate file for AVS:
	465	!-- First determine file names (including cyle numbers) of AVS files on
	466	!-- target machine (to which the files are to be transferred).
	467	!-- Therefore path information has to be obtained first.
	468	IF ( avs_output ) THEN
[82]	469	iaddres = LEN_TRIM( return_addres )
	470	iusern = LEN_TRIM( return_username )
[1]	471
	472	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	473	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	474	.NOT. avs_data_file_found )
	475
	476	READ ( 3, '(A)', END=1 ) zeile
	477
	478	SELECT CASE ( zeile(1:11) )
	479
	480	CASE ( 'PLOT3D_COOR' )
	481	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	482	avs_coor_file_localname
	483	avs_coor_file_found = .TRUE.
	484
	485	CASE ( 'PLOT3D_DATA' )
	486	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	487	avs_data_file_localname
	488	avs_data_file_found = .TRUE.
	489
	490	CASE DEFAULT
	491	READ ( 3, '(A/A)' ) zeile, zeile
	492
	493	END SELECT
	494
	495	ENDDO
	496	!
	497	!-- Now the cycle numbers on the remote machine must be obtained
	498	!-- using batch_scp
	499	1 CLOSE ( 3 )
	500	IF ( .NOT. avs_coor_file_found .OR. &
	501	.NOT. avs_data_file_found ) THEN
[274]	502	message_string= 'no filename for AVS-data-file ' // &
	503	'found in MRUN-config-file' // &
[247]	504	' &filename in FLD-file set to "unknown"'
	505	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	506
	507	avs_coor_file = 'unknown'
	508	avs_data_file = 'unknown'
	509	ELSE
	510	get_filenames = .TRUE.
	511	IF ( TRIM( host ) == 'hpmuk' .OR. &
	512	TRIM( host ) == 'lcmuk' ) THEN
	513	batch_scp = '/home/raasch/pub/batch_scp'
	514	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	515	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	516	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	517	TRIM( host ) == 'ibmb' ) THEN
	518	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	519	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	520	batch_scp = '/home/nhbksira/pub/batch_scp'
	521	ELSE
[247]	522	message_string= 'no path for batch_scp on host "' // &
	523	TRIM( host ) // '"'
	524	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	525	get_filenames = .FALSE.
	526	ENDIF
	527
	528	IF ( get_filenames ) THEN
	529	!
	530	!-- Determine the coordinate file name.
	531	!-- /etc/passwd serves as Dummy-Datei, because it is not
	532	!-- really transferred.
	533	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	534	return_username(1:iusern) // ' ' // &
[1]	535	return_addres(1:iaddres) // ' /etc/passwd "' // &
	536	TRIM( avs_coor_file_catalog ) // '" ' // &
	537	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	538
	539	CALL local_system( command )
	540	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	541	READ ( 3, '(A)' ) avs_coor_file
	542	CLOSE ( 3 )
	543	!
	544	!-- Determine the data file name
	545	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	546	return_username(1:iusern) // ' ' // &
[1]	547	return_addres(1:iaddres) // ' /etc/passwd "' // &
	548	TRIM( avs_data_file_catalog ) // '" ' // &
	549	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	550
	551	CALL local_system( command )
	552	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	553	READ ( 3, '(A)' ) avs_data_file
	554	CLOSE ( 3 )
	555
	556	ELSE
	557
	558	avs_coor_file = 'unknown'
	559	avs_data_file = 'unknown'
	560
	561	ENDIF
	562
	563	ENDIF
	564
	565	!
	566	!-- Output of the coordinate file description for FLD-file
	567	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	568	openfile(33)%opened = .TRUE.
	569	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
[667]	570	TRIM( avs_coor_file ), (nx+2nbgp)4, &
	571	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
[1]	572
	573
	574	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	575	DO i = 0, nx+1
	576	xkoor(i) = i * dx
	577	ENDDO
	578	DO j = 0, ny+1
	579	ykoor(j) = j * dy
	580	ENDDO
	581	DO k = 0, nz_do3d
	582	zkoor(k) = zu(k)
	583	ENDDO
	584
	585	!
	586	!-- Create and write on AVS coordinate file
	587	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	588	openfile(31)%opened = .TRUE.
	589
	590	WRITE (31) xkoor, ykoor, zkoor
	591	DEALLOCATE( xkoor, ykoor, zkoor )
	592
	593	!
	594	!-- Create FLD file (being written on in close_file)
	595	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	596	openfile(32)%opened = .TRUE.
	597
	598	!
	599	!-- Create flag file for compressed 3D output,
	600	!-- influences output commands in mrun
	601	IF ( do3d_compress ) THEN
	602	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	603	WRITE ( 3, '(1X)' )
	604	CLOSE ( 3 )
	605	ENDIF
	606
	607	ENDIF
	608
	609	ENDIF
	610
	611	!
	612	!-- In case of data compression output of the coordinates of the
	613	!-- corresponding partial array of a PE only once at the top of the file
	614	IF ( avs_output .AND. do3d_compress ) THEN
[667]	615	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
[1]	616	ENDIF
	617
	618	CASE ( 50:59 )
	619
	620	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	621	suffix = ''
	622	ELSE
	623	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	624	ENDIF
[105]	625	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	626	TRIM( suffix ), &
[102]	627	FORM='FORMATTED', RECL=496 )
[1]	628	!
	629	!-- Write PROFIL parameter file for output of time series
	630	!-- NOTE: To be on the safe side, this output is done at the beginning of
	631	!-- the model run (in case of collapse) and it is repeated in
	632	!-- close_file, then, however, with value ranges for the coordinate
	633	!-- systems
	634	!
	635	!-- Firstly determine the number of the coordinate systems to be drawn
	636	cranz = 0
	637	DO j = 1, 10
	638	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	639	ENDDO
	640	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	641	TRIM( region( file_id - 50 ) )
	642	!
	643	!-- Write RAHMEN parameter
[105]	644	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	645	TRIM( suffix ), &
[102]	646	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	647	WRITE ( 90, RAHMEN )
	648	!
	649	!-- Determine and write CROSS parameters for the individual coordinate
	650	!-- systems
	651	DO j = 1, 10
	652	k = cross_ts_number_count(j)
	653	IF ( k /= 0 ) THEN
	654	!
	655	!-- Store curve numbers, colours and line style
	656	klist(1:k) = cross_ts_numbers(1:k,j)
	657	klist(k+1:10) = 999999
	658	!
	659	!-- Write CROSS parameter
	660	WRITE ( 90, CROSS )
	661
	662	ENDIF
	663	ENDDO
	664
	665	CLOSE ( 90 )
	666	!
	667	!-- Write all labels at the top of the data file, but only during the
	668	!-- first run of a sequence of jobs. The following jobs copy the time
	669	!-- series data to the bottom of that file.
	670	IF ( runnr == 0 ) THEN
	671	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	672	' ' // TRIM( region( file_id - 50 ) )
	673	ENDIF
	674
	675
	676	CASE ( 80 )
	677
	678	IF ( myid_char == '' ) THEN
[105]	679	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	680	FORM='FORMATTED', POSITION='APPEND' )
[1]	681	ELSE
	682	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	683	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	684	ENDIF
[809]	685	#if defined( __parallel ) && ! defined ( __check )
[1]	686	!
	687	!-- Set a barrier in order to allow that thereafter all other
	688	!-- processors in the directory created by PE0 can open their file.
	689	!-- WARNING: The following barrier will lead to hanging jobs, if
	690	!-- check_open is first called from routine
	691	!-- allocate_prt_memory!
	692	IF ( .NOT. openfile(80)%opened_before ) THEN
	693	CALL MPI_BARRIER( comm2d, ierr )
	694	ENDIF
	695	#endif
[105]	696	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	697	myid_char, &
[102]	698	FORM='FORMATTED', POSITION='APPEND' )
[1]	699	ENDIF
	700
	701	IF ( .NOT. openfile(80)%opened_before ) THEN
	702	WRITE ( 80, 8000 ) TRIM( run_description_header )
	703	ENDIF
	704
	705	CASE ( 81 )
	706
[102]	707	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	708	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	709
	710	CASE ( 82 )
	711
[102]	712	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	713	POSITION = 'APPEND' )
	714
	715	CASE ( 83 )
	716
[102]	717	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	718	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	719
	720	CASE ( 84 )
	721
[102]	722	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	723	POSITION='APPEND' )
	724
	725	CASE ( 85 )
	726
	727	IF ( myid_char == '' ) THEN
[105]	728	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	729	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	730	ELSE
	731	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	732	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	733	ENDIF
[809]	734	#if defined( __parallel ) && ! defined ( __check )
[1]	735	!
	736	!-- Set a barrier in order to allow that thereafter all other
	737	!-- processors in the directory created by PE0 can open their file
	738	CALL MPI_BARRIER( comm2d, ierr )
	739	#endif
[105]	740	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	741	myid_char, &
[102]	742	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	743	ENDIF
	744
	745	IF ( .NOT. openfile(85)%opened_before ) THEN
	746	WRITE ( 85 ) run_description_header
	747	!
	748	!-- Attention: change version number whenever the output format on
[849]	749	!-- unit 85 is changed (see also in routine
	750	!-- lpm_data_output_particles)
[1]	751	rtext = 'data format version 3.0'
	752	WRITE ( 85 ) rtext
	753	WRITE ( 85 ) number_of_particle_groups, &
	754	max_number_of_particle_groups
	755	WRITE ( 85 ) particle_groups
	756	ENDIF
	757
	758	#if defined( __netcdf )
	759	CASE ( 101, 111 )
	760	!
	761	!-- Set filename depending on unit number
	762	IF ( file_id == 101 ) THEN
[102]	763	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	764	av = 0
	765	ELSE
[102]	766	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	767	av = 1
	768	ENDIF
	769	!
[1031]	770	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	771	!-- be opened for extension, if its dimensions and variables match the
	772	!-- actual run.
	773	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	774
	775	IF ( netcdf_extend ) THEN
	776	!
[1031]	777	!-- Open an existing netCDF file for output
	778	CALL open_write_netcdf_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	779	!
	780	!-- Read header information and set all ids. If there is a mismatch
	781	!-- between the previuos and the actual run, netcdf_extend is returned
	782	!-- as .FALSE.
	783	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	784
	785	!
	786	!-- Remove the local file, if it can not be extended
	787	IF ( .NOT. netcdf_extend ) THEN
	788	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	789	CALL handle_netcdf_error( 'check_open', 21 )
[493]	790	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	791	ENDIF
	792
	793	ENDIF
	794
	795	IF ( .NOT. netcdf_extend ) THEN
	796	!
[1031]	797	!-- Create a new netCDF output file with requested netCDF format
	798	CALL create_netcdf_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	799
	800	!
[1]	801	!-- Define the header
	802	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	803
[493]	804	!
[1031]	805	!-- In case of parallel netCDF output, create flag file which tells
[493]	806	!-- combine_plot_fields that nothing is to do.
[1031]	807	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	808	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	809	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	810	CLOSE( 99 )
	811	ENDIF
	812
[1]	813	ENDIF
	814
	815	CASE ( 102, 112 )
	816	!
	817	!-- Set filename depending on unit number
	818	IF ( file_id == 102 ) THEN
[102]	819	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	820	av = 0
	821	ELSE
[102]	822	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	823	av = 1
	824	ENDIF
	825	!
[1031]	826	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	827	!-- be opened for extension, if its dimensions and variables match the
	828	!-- actual run.
	829	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	830
	831	IF ( netcdf_extend ) THEN
	832	!
[1031]	833	!-- Open an existing netCDF file for output
	834	CALL open_write_netcdf_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	835	!
	836	!-- Read header information and set all ids. If there is a mismatch
	837	!-- between the previuos and the actual run, netcdf_extend is returned
	838	!-- as .FALSE.
	839	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	840
	841	!
	842	!-- Remove the local file, if it can not be extended
	843	IF ( .NOT. netcdf_extend ) THEN
	844	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	845	CALL handle_netcdf_error( 'check_open', 24 )
[493]	846	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	847	ENDIF
	848
	849	ENDIF
	850
	851	IF ( .NOT. netcdf_extend ) THEN
	852	!
[1031]	853	!-- Create a new netCDF output file with requested netCDF format
	854	CALL create_netcdf_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	855
	856	!
[1]	857	!-- Define the header
	858	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	859
[493]	860	!
[1031]	861	!-- In case of parallel netCDF output, create flag file which tells
[493]	862	!-- combine_plot_fields that nothing is to do.
[1031]	863	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	864	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	865	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	866	CLOSE( 99 )
	867	ENDIF
	868
[1]	869	ENDIF
	870
	871	CASE ( 103, 113 )
	872	!
	873	!-- Set filename depending on unit number
	874	IF ( file_id == 103 ) THEN
[102]	875	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	876	av = 0
	877	ELSE
[102]	878	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	879	av = 1
	880	ENDIF
	881	!
[1031]	882	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	883	!-- be opened for extension, if its dimensions and variables match the
	884	!-- actual run.
	885	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	886
	887	IF ( netcdf_extend ) THEN
	888	!
[1031]	889	!-- Open an existing netCDF file for output
	890	CALL open_write_netcdf_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	891	!
	892	!-- Read header information and set all ids. If there is a mismatch
	893	!-- between the previuos and the actual run, netcdf_extend is returned
	894	!-- as .FALSE.
	895	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	896
	897	!
	898	!-- Remove the local file, if it can not be extended
	899	IF ( .NOT. netcdf_extend ) THEN
	900	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	901	CALL handle_netcdf_error( 'check_open', 27 )
[493]	902	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	903	ENDIF
	904
	905	ENDIF
	906
	907	IF ( .NOT. netcdf_extend ) THEN
	908	!
[1031]	909	!-- Create a new netCDF output file with requested netCDF format
	910	CALL create_netcdf_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	911
	912	!
[1]	913	!-- Define the header
	914	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	915
[493]	916	!
[1031]	917	!-- In case of parallel netCDF output, create flag file which tells
[493]	918	!-- combine_plot_fields that nothing is to do.
[1031]	919	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	920	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	921	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	922	CLOSE( 99 )
	923	ENDIF
	924
[1]	925	ENDIF
	926
	927	CASE ( 104 )
	928	!
[102]	929	!-- Set filename
	930	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	931
	932	!
[1031]	933	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	934	!-- be opened for extension, if its variables match the actual run.
[102]	935	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	936
	937	IF ( netcdf_extend ) THEN
	938	!
[1031]	939	!-- Open an existing netCDF file for output
	940	CALL open_write_netcdf_file( filename, id_set_pr, .FALSE., 29 )
[1]	941	!
	942	!-- Read header information and set all ids. If there is a mismatch
	943	!-- between the previuos and the actual run, netcdf_extend is returned
	944	!-- as .FALSE.
	945	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	946
	947	!
	948	!-- Remove the local file, if it can not be extended
	949	IF ( .NOT. netcdf_extend ) THEN
	950	nc_stat = NF90_CLOSE( id_set_pr )
[263]	951	CALL handle_netcdf_error( 'check_open', 30 )
[102]	952	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	953	ENDIF
	954
	955	ENDIF
	956
	957	IF ( .NOT. netcdf_extend ) THEN
	958	!
[1031]	959	!-- Create a new netCDF output file with requested netCDF format
	960	CALL create_netcdf_file( filename, id_set_pr, .FALSE., 31 )
[1]	961	!
	962	!-- Define the header
	963	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	964
	965	ENDIF
	966
	967	CASE ( 105 )
	968	!
[102]	969	!-- Set filename
	970	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	971
	972	!
[1031]	973	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	974	!-- be opened for extension, if its variables match the actual run.
[102]	975	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	976
	977	IF ( netcdf_extend ) THEN
	978	!
[1031]	979	!-- Open an existing netCDF file for output
	980	CALL open_write_netcdf_file( filename, id_set_ts, .FALSE., 32 )
[1]	981	!
	982	!-- Read header information and set all ids. If there is a mismatch
	983	!-- between the previuos and the actual run, netcdf_extend is returned
	984	!-- as .FALSE.
	985	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	986
	987	!
	988	!-- Remove the local file, if it can not be extended
	989	IF ( .NOT. netcdf_extend ) THEN
	990	nc_stat = NF90_CLOSE( id_set_ts )
[263]	991	CALL handle_netcdf_error( 'check_open', 33 )
[102]	992	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	993	ENDIF
	994
	995	ENDIF
	996
	997	IF ( .NOT. netcdf_extend ) THEN
	998	!
[1031]	999	!-- Create a new netCDF output file with requested netCDF format
	1000	CALL create_netcdf_file( filename, id_set_ts, .FALSE., 34 )
[1]	1001	!
	1002	!-- Define the header
	1003	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1004
	1005	ENDIF
	1006
	1007
	1008	CASE ( 106, 116 )
	1009	!
	1010	!-- Set filename depending on unit number
	1011	IF ( file_id == 106 ) THEN
[102]	1012	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	1013	av = 0
	1014	ELSE
[102]	1015	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	1016	av = 1
	1017	ENDIF
	1018	!
[1031]	1019	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	1020	!-- be opened for extension, if its dimensions and variables match the
	1021	!-- actual run.
	1022	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1023
	1024	IF ( netcdf_extend ) THEN
	1025	!
[1031]	1026	!-- Open an existing netCDF file for output
	1027	CALL open_write_netcdf_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	1028	!
	1029	!-- Read header information and set all ids. If there is a mismatch
	1030	!-- between the previuos and the actual run, netcdf_extend is returned
	1031	!-- as .FALSE.
	1032	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1033
	1034	!
	1035	!-- Remove the local file, if it can not be extended
	1036	IF ( .NOT. netcdf_extend ) THEN
	1037	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1038	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1039	CALL local_system('rm ' // TRIM( filename ) )
	1040	ENDIF
	1041
	1042	ENDIF
	1043
	1044	IF ( .NOT. netcdf_extend ) THEN
	1045	!
[1031]	1046	!-- Create a new netCDF output file with requested netCDF format
	1047	CALL create_netcdf_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	1048
	1049	!
[1]	1050	!-- Define the header
	1051	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1052
[493]	1053	!
[1031]	1054	!-- In case of parallel netCDF output, create flag file which tells
[493]	1055	!-- combine_plot_fields that nothing is to do.
[1031]	1056	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	1057	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1058	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1059	CLOSE( 99 )
	1060	ENDIF
	1061
[1]	1062	ENDIF
	1063
	1064
	1065	CASE ( 107 )
	1066	!
[102]	1067	!-- Set filename
	1068	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1069
	1070	!
[1031]	1071	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1072	!-- be opened for extension, if its variables match the actual run.
[102]	1073	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1074
	1075	IF ( netcdf_extend ) THEN
	1076	!
[1031]	1077	!-- Open an existing netCDF file for output
	1078	CALL open_write_netcdf_file( filename, id_set_sp, .FALSE., 38 )
[263]	1079
[1]	1080	!
	1081	!-- Read header information and set all ids. If there is a mismatch
	1082	!-- between the previuos and the actual run, netcdf_extend is returned
	1083	!-- as .FALSE.
	1084	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1085
	1086	!
	1087	!-- Remove the local file, if it can not be extended
	1088	IF ( .NOT. netcdf_extend ) THEN
	1089	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1090	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1091	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1092	ENDIF
	1093
	1094	ENDIF
	1095
	1096	IF ( .NOT. netcdf_extend ) THEN
	1097	!
[1031]	1098	!-- Create a new netCDF output file with requested netCDF format
	1099	CALL create_netcdf_file( filename, id_set_sp, .FALSE., 40 )
[1]	1100	!
	1101	!-- Define the header
	1102	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1103
	1104	ENDIF
	1105
	1106
	1107	CASE ( 108 )
	1108
	1109	IF ( myid_char == '' ) THEN
[102]	1110	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1111	ELSE
[105]	1112	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1113	myid_char
[1]	1114	ENDIF
	1115	!
[1031]	1116	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1117	!-- be opened for extension, if its variables match the actual run.
	1118	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1119
	1120	IF ( netcdf_extend ) THEN
	1121	!
[1031]	1122	!-- Open an existing netCDF file for output
	1123	CALL open_write_netcdf_file( filename, id_set_prt, .FALSE., 41 )
[1]	1124	!
	1125	!-- Read header information and set all ids. If there is a mismatch
	1126	!-- between the previuos and the actual run, netcdf_extend is returned
	1127	!-- as .FALSE.
	1128	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1129
	1130	!
	1131	!-- Remove the local file, if it can not be extended
	1132	IF ( .NOT. netcdf_extend ) THEN
	1133	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1134	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1135	CALL local_system( 'rm ' // filename )
	1136	ENDIF
	1137
	1138	ENDIF
	1139
	1140	IF ( .NOT. netcdf_extend ) THEN
	1141
	1142	!
	1143	!-- For runs on multiple processors create the subdirectory
	1144	IF ( myid_char /= '' ) THEN
	1145	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1146	THEN ! needs modification in case of non-extendable sets
[102]	1147	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1148	TRIM( coupling_char ) // '/' )
[1]	1149	ENDIF
[809]	1150	#if defined( __parallel ) && ! defined ( __check )
[807]	1151	!
[1]	1152	!-- Set a barrier in order to allow that all other processors in the
	1153	!-- directory created by PE0 can open their file
	1154	CALL MPI_BARRIER( comm2d, ierr )
	1155	#endif
	1156	ENDIF
	1157
	1158	!
[1031]	1159	!-- Create a new netCDF output file with requested netCDF format
	1160	CALL create_netcdf_file( filename, id_set_prt, .FALSE., 43 )
[519]	1161
	1162	!
[1]	1163	!-- Define the header
	1164	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1165
	1166	ENDIF
	1167
	1168	CASE ( 109 )
	1169	!
[102]	1170	!-- Set filename
	1171	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1172
	1173	!
[1031]	1174	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1175	!-- be opened for extension, if its variables match the actual run.
[102]	1176	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1177
	1178	IF ( netcdf_extend ) THEN
	1179	!
[1031]	1180	!-- Open an existing netCDF file for output
	1181	CALL open_write_netcdf_file( filename, id_set_pts, .FALSE., 393 )
[1]	1182	!
	1183	!-- Read header information and set all ids. If there is a mismatch
	1184	!-- between the previuos and the actual run, netcdf_extend is returned
	1185	!-- as .FALSE.
	1186	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1187
	1188	!
	1189	!-- Remove the local file, if it can not be extended
	1190	IF ( .NOT. netcdf_extend ) THEN
	1191	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1192	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1193	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1194	ENDIF
	1195
	1196	ENDIF
	1197
	1198	IF ( .NOT. netcdf_extend ) THEN
	1199	!
[1031]	1200	!-- Create a new netCDF output file with requested netCDF format
	1201	CALL create_netcdf_file( filename, id_set_pts, .FALSE., 395 )
[1]	1202	!
	1203	!-- Define the header
	1204	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1205
	1206	ENDIF
[410]	1207
[564]	1208	CASE ( 201:200+2*max_masks )
[410]	1209	!
	1210	!-- Set filename depending on unit number
[564]	1211	IF ( file_id <= 200+max_masks ) THEN
	1212	mid = file_id - 200
[410]	1213	WRITE ( mask_char,'(I2.2)') mid
	1214	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
	1215	av = 0
	1216	ELSE
[564]	1217	mid = file_id - (200+max_masks)
[410]	1218	WRITE ( mask_char,'(I2.2)') mid
	1219	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
	1220	coupling_char
	1221	av = 1
	1222	ENDIF
	1223	!
[1031]	1224	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1225	!-- be opened for extension, if its dimensions and variables match the
	1226	!-- actual run.
	1227	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1228
	1229	IF ( netcdf_extend ) THEN
	1230	!
[1031]	1231	!-- Open an existing netCDF file for output
	1232	CALL open_write_netcdf_file( filename, id_set_mask(mid,av), &
	1233	.TRUE., 456 )
[410]	1234	!
	1235	!-- Read header information and set all ids. If there is a mismatch
	1236	!-- between the previuos and the actual run, netcdf_extend is returned
	1237	!-- as .FALSE.
	1238	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
[1]	1239
[410]	1240	!
	1241	!-- Remove the local file, if it can not be extended
	1242	IF ( .NOT. netcdf_extend ) THEN
	1243	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[564]	1244	CALL handle_netcdf_error( 'check_open', 457 )
[410]	1245	CALL local_system('rm ' // TRIM( filename ) )
	1246	ENDIF
[1]	1247
[410]	1248	ENDIF
	1249
	1250	IF ( .NOT. netcdf_extend ) THEN
[1]	1251	!
[1031]	1252	!-- Create a new netCDF output file with requested netCDF format
	1253	CALL create_netcdf_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1254	!
[410]	1255	!-- Define the header
	1256	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
	1257
	1258	ENDIF
	1259
	1260
	1261	#else
	1262
[564]	1263	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1264
	1265	!
[1]	1266	!-- Nothing is done in case of missing netcdf support
	1267	RETURN
	1268
	1269	#endif
	1270
	1271	CASE DEFAULT
	1272
[247]	1273	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1274	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1275
	1276	END SELECT
	1277
	1278	!
	1279	!-- Set open flag
	1280	openfile(file_id)%opened = .TRUE.
	1281
	1282	!
	1283	!-- Formats
	1284	3300 FORMAT ('#'/ &
	1285	'coord 1 file=',A,' filetype=unformatted'/ &
	1286	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1287	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1288	'#')
	1289	4000 FORMAT ('# ',A)
	1290	5000 FORMAT ('# ',A/ &
	1291	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1292	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1293	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1294	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1295	8000 FORMAT (A/ &
	1296	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1297	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1298	103('-'))
	1299
	1300	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |