Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 1105

Last change on this file since 1105 was 1093, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 46.0 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
[1093]	22	!
[1]	23	!
	24	! Former revisions:
	25	! -----------------
[3]	26	! $Id: check_open.f90 1093 2013-02-02 12:58:49Z maronga $
[810]	27	!
[1093]	28	! 1092 2013-02-02 11:24:22Z raasch
	29	! unused variables removed
	30	!
[1037]	31	! 1036 2012-10-22 13:43:42Z raasch
	32	! code put under GPL (PALM 3.9)
	33	!
[1035]	34	! 1031 2012-10-19 14:35:30Z raasch
	35	! netCDF4 without parallel file support implemented,
	36	! opening of netCDF files are done by new routines create_netcdf_file and
	37	! open_write_netcdf_file
	38	!
[965]	39	! 964 2012-07-26 09:14:24Z raasch
	40	! old profil-units (40:49) removed,
	41	! append feature removed from unit 14
	42	!
[850]	43	! 849 2012-03-15 10:35:09Z raasch
	44	! comment changed
	45	!
[810]	46	! 809 2012-01-30 13:32:58Z maronga
	47	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	48	!
[808]	49	! 807 2012-01-25 11:53:51Z maronga
	50	! New cpp directive "__check" implemented which is used by check_namelist_files
	51	!
[766]	52	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
[77]	53	!
[668]	54	! 667 2010-12-23 12:06:00Z suehring/gryschka
	55	! Output of total array size was adapted to nbgp.
	56	!
[601]	57	! 600 2010-11-24 16:10:51Z raasch
	58	! bugfix in opening of cross section netcdf-files (parallel opening with
	59	! netcdf4 only works for netcdf_data_format > 2)
	60	!
[565]	61	! 564 2010-09-30 13:18:59Z helmke
	62	! start number of mask output files changed to 201, netcdf message identifiers
	63	! of masked output changed
	64	!
[520]	65	! 519 2010-03-19 05:30:02Z raasch
[1031]	66	! netCDF4 support for particle data
[520]	67	!
[494]	68	! 493 2010-03-01 08:30:24Z raasch
[1031]	69	! netCDF4 support (parallel output)
[494]	70	!
[449]	71	! 410 2009-12-04 17:05:40Z letzel
	72	! masked data output
	73	!
[392]	74	! 277 2009-03-31 09:13:47Z heinze
[1031]	75	! Output of netCDF messages with aid of message handling routine.
[392]	76	! Output of messages replaced by message handling routine
	77	!
[198]	78	! 146 2008-01-17 13:08:34Z raasch
	79	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	80	! because only this file contains the global variables,
	81	! myid_char_14 removed
	82	!
[139]	83	! 120 2007-10-17 11:54:43Z raasch
[1031]	84	! Status of 3D-volume netCDF data file only depends on switch netcdf_64bit_3d
[139]	85	!
[110]	86	! 105 2007-08-08 07:12:55Z raasch
	87	! Different filenames are used in case of a coupled simulation,
	88	! coupling_char added to all relevant filenames
	89	!
[83]	90	! 82 2007-04-16 15:40:52Z raasch
	91	! Call of local_getenv removed, preprocessor directives for old systems removed
	92	!
[77]	93	! 46 2007-03-05 06:00:47Z raasch
	94	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	95	!
[3]	96	! RCS Log replace by Id keyword, revision history cleaned up
	97	!
[1]	98	! Revision 1.44 2006/08/22 13:48:34 raasch
	99	! xz and yz cross sections now up to nzt+1
	100	!
	101	! Revision 1.1 1997/08/11 06:10:55 raasch
	102	! Initial revision
	103	!
	104	!
	105	! Description:
	106	! ------------
	107	! Check if file unit is open. If not, open file and, if necessary, write a
	108	! header or start other initializing actions, respectively.
	109	!------------------------------------------------------------------------------!
	110
	111	USE array_kind
	112	USE arrays_3d
	113	USE control_parameters
	114	USE grid_variables
	115	USE indices
	116	USE netcdf_control
	117	USE particle_attributes
	118	USE pegrid
	119	USE profil_parameter
	120	USE statistics
	121
	122	IMPLICIT NONE
	123
[410]	124	CHARACTER (LEN=2) :: mask_char, suffix
[82]	125	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	126	CHARACTER (LEN=30) :: filename
	127	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	128	avs_data_file_localname
	129	CHARACTER (LEN=80) :: rtext
	130	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	131	batch_scp, zeile
	132	CHARACTER (LEN=400) :: command
	133
[1092]	134	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, iusern, &
[1]	135	j, k, legpos = 1, timodex = 1
[1092]	136	INTEGER, DIMENSION(10) :: klist
[1]	137
	138	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	139	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	140	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	141
	142	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	143	sizex = 250.0, sizey = 40.0, texfac = 1.5
	144
	145	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	146	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	147
	148
	149	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
[1092]	150	NAMELIST /CROSS/ ansx, ansy, grid, gwid, klist, legpos, &
[1]	151	rand, rlegfak, sizex, sizey, texfac, &
	152	timodex, twoxa, twoya, xtext
	153
	154
	155	!
	156	!-- Immediate return if file already open
	157	IF ( openfile(file_id)%opened ) RETURN
	158
[809]	159	#if ! defined ( __check )
[1]	160	!
	161	!-- Only certain files are allowed to be re-opened
	162	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	163	!-- has not been checked so far, if it works!
	164	IF ( openfile(file_id)%opened_before ) THEN
	165	SELECT CASE ( file_id )
[143]	166	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	167	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	168	message_string = 're-open of unit ' // &
[274]	169	'14 is not verified. Please check results!'
[247]	170	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	171	ENDIF
[143]	172
[1]	173	CASE DEFAULT
[247]	174	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	175	' is not allowed'
[247]	176	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	177
[1]	178	RETURN
[143]	179
[1]	180	END SELECT
	181	ENDIF
[807]	182	#endif
[1]	183
	184	!
	185	!-- Check if file may be opened on the relevant PE
	186	SELECT CASE ( file_id )
	187
[964]	188	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109 )
[410]	189
[493]	190	IF ( myid /= 0 ) THEN
	191	WRITE( message_string, * ) 'opening file-id ',file_id, &
	192	' not allowed for PE ',myid
	193	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	194	ENDIF
	195
[564]	196	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	197
[1031]	198	IF ( netcdf_data_format < 5 ) THEN
[247]	199
[410]	200	IF ( myid /= 0 ) THEN
	201	WRITE( message_string, * ) 'opening file-id ',file_id, &
	202	' not allowed for PE ',myid
	203	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	204	ENDIF
	205
[493]	206	ENDIF
[1]	207
	208	CASE ( 21, 22, 23 )
	209
	210	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	211	IF ( myid /= 0 ) THEN
[247]	212	WRITE( message_string, * ) 'opening file-id ',file_id, &
	213	' not allowed for PE ',myid
[277]	214	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	215	END IF
[1]	216	ENDIF
	217
	218	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	219
	220	!
	221	!-- File-ids that are used temporarily in other routines
[247]	222	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	223	' is not allowed since it is used otherwise'
[247]	224	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	225
[1]	226	END SELECT
	227
	228	!
	229	!-- Open relevant files
	230	SELECT CASE ( file_id )
	231
	232	CASE ( 11 )
	233
[807]	234	#if defined ( __check )
	235	!
	236	!-- In case of a prior parameter file check, the p3d data is stored in
	237	!-- PARIN, while the p3df is stored in PARINF. This only applies to
	238	!-- check_namelist_files!
	239	IF ( check_restart == 2 ) THEN
	240	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
	241	STATUS='OLD' )
	242	ELSE
	243	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	244	STATUS='OLD' )
	245	END IF
	246	#else
	247
[102]	248	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	249	STATUS='OLD' )
[807]	250	#endif
[1]	251
	252	CASE ( 13 )
	253
	254	IF ( myid_char == '' ) THEN
[102]	255	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	256	FORM='UNFORMATTED', STATUS='OLD' )
[1]	257	ELSE
[143]	258	!
	259	!-- First opening of unit 13 openes file _0000 on all PEs because only
	260	!-- this file contains the global variables
	261	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	262	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	263	FORM='UNFORMATTED', STATUS='OLD' )
	264	ELSE
	265	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	266	FORM='UNFORMATTED', STATUS='OLD' )
	267	ENDIF
[1]	268	ENDIF
	269
	270	CASE ( 14 )
	271
	272	IF ( myid_char == '' ) THEN
[102]	273	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	274	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	275	ELSE
	276	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	277	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	278	ENDIF
[809]	279	#if defined( __parallel ) && ! defined ( __check )
[1]	280	!
	281	!-- Set a barrier in order to allow that all other processors in the
	282	!-- directory created by PE0 can open their file
	283	CALL MPI_BARRIER( comm2d, ierr )
	284	#endif
[146]	285	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[887]	286	FORM='UNFORMATTED' )
[1]	287	ENDIF
	288
	289	CASE ( 15 )
	290
[102]	291	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	292
	293	CASE ( 16 )
	294
[102]	295	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	296
	297	CASE ( 17 )
	298
[102]	299	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	300
	301	CASE ( 18 )
	302
[102]	303	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	304
	305	CASE ( 19 )
	306
[102]	307	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	308
	309	CASE ( 20 )
	310
	311	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	312	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	313	ENDIF
	314	IF ( myid_char == '' ) THEN
[105]	315	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	316	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	317	ELSE
[809]	318	#if defined( __parallel ) && ! defined ( __check )
[1]	319	!
	320	!-- Set a barrier in order to allow that all other processors in the
	321	!-- directory created by PE0 can open their file
	322	CALL MPI_BARRIER( comm2d, ierr )
	323	#endif
[105]	324	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	325	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	326	ENDIF
	327
	328	CASE ( 21 )
	329
	330	IF ( data_output_2d_on_each_pe ) THEN
[105]	331	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	332	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	333	ELSE
[102]	334	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	335	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	336	ENDIF
	337
	338	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	339	!
	340	!-- Output for combine_plot_fields
	341	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	342	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	343	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	344	ENDIF
	345	!
	346	!-- Determine and write ISO2D coordiante header
	347	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	348	hu = 0.0
	349	ho = (ny+1) * dy
	350	DO i = 1, ny
	351	eta(i) = REAL( i ) / ( ny + 1.0 )
	352	ENDDO
	353	eta(0) = 0.0
	354	eta(ny+1) = 1.0
	355
	356	WRITE (21) dx,eta,hu,ho
	357	DEALLOCATE( eta, ho, hu )
	358
	359	!
	360	!-- Create output file for local parameters
	361	IF ( iso2d_output ) THEN
[102]	362	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	363	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	364	openfile(27)%opened = .TRUE.
	365	ENDIF
	366
	367	ENDIF
	368
	369	CASE ( 22 )
	370
	371	IF ( data_output_2d_on_each_pe ) THEN
[105]	372	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	373	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	374	ELSE
[102]	375	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	376	POSITION='APPEND' )
	377	ENDIF
	378
	379	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	380	!
	381	!-- Output for combine_plot_fields
	382	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	383	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	384	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	385	ENDIF
	386	!
	387	!-- Determine and write ISO2D coordiante header
	388	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	389	hu = 0.0
	390	ho = zu(nz+1)
	391	DO i = 1, nz
	392	eta(i) = REAL( zu(i) ) / zu(nz+1)
	393	ENDDO
	394	eta(0) = 0.0
	395	eta(nz+1) = 1.0
	396
	397	WRITE (22) dx,eta,hu,ho
	398	DEALLOCATE( eta, ho, hu )
	399	!
	400	!-- Create output file for local parameters
[102]	401	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	402	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	403	openfile(28)%opened = .TRUE.
	404
	405	ENDIF
	406
	407	CASE ( 23 )
	408
	409	IF ( data_output_2d_on_each_pe ) THEN
[105]	410	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	411	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	412	ELSE
[102]	413	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	414	POSITION='APPEND' )
	415	ENDIF
	416
	417	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	418	!
	419	!-- Output for combine_plot_fields
	420	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	421	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	422	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	423	ENDIF
	424	!
	425	!-- Determine and write ISO2D coordiante header
	426	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	427	hu = 0.0
	428	ho = zu(nz+1)
	429	DO i = 1, nz
	430	eta(i) = REAL( zu(i) ) / zu(nz+1)
	431	ENDDO
	432	eta(0) = 0.0
	433	eta(nz+1) = 1.0
	434
	435	WRITE (23) dx,eta,hu,ho
	436	DEALLOCATE( eta, ho, hu )
	437	!
	438	!-- Create output file for local parameters
[102]	439	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	440	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	441	openfile(29)%opened = .TRUE.
	442
	443	ENDIF
	444
	445	CASE ( 30 )
	446
[105]	447	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	448	FORM='UNFORMATTED' )
[1]	449	!
	450	!-- Write coordinate file for AVS
	451	IF ( myid == 0 ) THEN
	452	#if defined( __parallel )
	453	!
	454	!-- Specifications for combine_plot_fields
	455	IF ( .NOT. do3d_compress ) THEN
[667]	456	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
[1]	457	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	458	ENDIF
	459	#endif
	460	!
	461	!-- Write coordinate file for AVS:
	462	!-- First determine file names (including cyle numbers) of AVS files on
	463	!-- target machine (to which the files are to be transferred).
	464	!-- Therefore path information has to be obtained first.
	465	IF ( avs_output ) THEN
[82]	466	iaddres = LEN_TRIM( return_addres )
	467	iusern = LEN_TRIM( return_username )
[1]	468
	469	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	470	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	471	.NOT. avs_data_file_found )
	472
	473	READ ( 3, '(A)', END=1 ) zeile
	474
	475	SELECT CASE ( zeile(1:11) )
	476
	477	CASE ( 'PLOT3D_COOR' )
	478	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	479	avs_coor_file_localname
	480	avs_coor_file_found = .TRUE.
	481
	482	CASE ( 'PLOT3D_DATA' )
	483	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	484	avs_data_file_localname
	485	avs_data_file_found = .TRUE.
	486
	487	CASE DEFAULT
	488	READ ( 3, '(A/A)' ) zeile, zeile
	489
	490	END SELECT
	491
	492	ENDDO
	493	!
	494	!-- Now the cycle numbers on the remote machine must be obtained
	495	!-- using batch_scp
	496	1 CLOSE ( 3 )
	497	IF ( .NOT. avs_coor_file_found .OR. &
	498	.NOT. avs_data_file_found ) THEN
[274]	499	message_string= 'no filename for AVS-data-file ' // &
	500	'found in MRUN-config-file' // &
[247]	501	' &filename in FLD-file set to "unknown"'
	502	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	503
	504	avs_coor_file = 'unknown'
	505	avs_data_file = 'unknown'
	506	ELSE
	507	get_filenames = .TRUE.
	508	IF ( TRIM( host ) == 'hpmuk' .OR. &
	509	TRIM( host ) == 'lcmuk' ) THEN
	510	batch_scp = '/home/raasch/pub/batch_scp'
	511	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	512	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	513	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	514	TRIM( host ) == 'ibmb' ) THEN
	515	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	516	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	517	batch_scp = '/home/nhbksira/pub/batch_scp'
	518	ELSE
[247]	519	message_string= 'no path for batch_scp on host "' // &
	520	TRIM( host ) // '"'
	521	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	522	get_filenames = .FALSE.
	523	ENDIF
	524
	525	IF ( get_filenames ) THEN
	526	!
	527	!-- Determine the coordinate file name.
	528	!-- /etc/passwd serves as Dummy-Datei, because it is not
	529	!-- really transferred.
	530	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	531	return_username(1:iusern) // ' ' // &
[1]	532	return_addres(1:iaddres) // ' /etc/passwd "' // &
	533	TRIM( avs_coor_file_catalog ) // '" ' // &
	534	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	535
	536	CALL local_system( command )
	537	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	538	READ ( 3, '(A)' ) avs_coor_file
	539	CLOSE ( 3 )
	540	!
	541	!-- Determine the data file name
	542	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	543	return_username(1:iusern) // ' ' // &
[1]	544	return_addres(1:iaddres) // ' /etc/passwd "' // &
	545	TRIM( avs_data_file_catalog ) // '" ' // &
	546	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	547
	548	CALL local_system( command )
	549	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	550	READ ( 3, '(A)' ) avs_data_file
	551	CLOSE ( 3 )
	552
	553	ELSE
	554
	555	avs_coor_file = 'unknown'
	556	avs_data_file = 'unknown'
	557
	558	ENDIF
	559
	560	ENDIF
	561
	562	!
	563	!-- Output of the coordinate file description for FLD-file
	564	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	565	openfile(33)%opened = .TRUE.
	566	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
[667]	567	TRIM( avs_coor_file ), (nx+2nbgp)4, &
	568	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
[1]	569
	570
	571	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	572	DO i = 0, nx+1
	573	xkoor(i) = i * dx
	574	ENDDO
	575	DO j = 0, ny+1
	576	ykoor(j) = j * dy
	577	ENDDO
	578	DO k = 0, nz_do3d
	579	zkoor(k) = zu(k)
	580	ENDDO
	581
	582	!
	583	!-- Create and write on AVS coordinate file
	584	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	585	openfile(31)%opened = .TRUE.
	586
	587	WRITE (31) xkoor, ykoor, zkoor
	588	DEALLOCATE( xkoor, ykoor, zkoor )
	589
	590	!
	591	!-- Create FLD file (being written on in close_file)
	592	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	593	openfile(32)%opened = .TRUE.
	594
	595	!
	596	!-- Create flag file for compressed 3D output,
	597	!-- influences output commands in mrun
	598	IF ( do3d_compress ) THEN
	599	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	600	WRITE ( 3, '(1X)' )
	601	CLOSE ( 3 )
	602	ENDIF
	603
	604	ENDIF
	605
	606	ENDIF
	607
	608	!
	609	!-- In case of data compression output of the coordinates of the
	610	!-- corresponding partial array of a PE only once at the top of the file
	611	IF ( avs_output .AND. do3d_compress ) THEN
[667]	612	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
[1]	613	ENDIF
	614
	615	CASE ( 50:59 )
	616
	617	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	618	suffix = ''
	619	ELSE
	620	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	621	ENDIF
[105]	622	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	623	TRIM( suffix ), &
[102]	624	FORM='FORMATTED', RECL=496 )
[1]	625	!
	626	!-- Write PROFIL parameter file for output of time series
	627	!-- NOTE: To be on the safe side, this output is done at the beginning of
	628	!-- the model run (in case of collapse) and it is repeated in
	629	!-- close_file, then, however, with value ranges for the coordinate
	630	!-- systems
	631	!
	632	!-- Firstly determine the number of the coordinate systems to be drawn
	633	cranz = 0
	634	DO j = 1, 10
	635	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	636	ENDDO
	637	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	638	TRIM( region( file_id - 50 ) )
	639	!
	640	!-- Write RAHMEN parameter
[105]	641	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	642	TRIM( suffix ), &
[102]	643	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	644	WRITE ( 90, RAHMEN )
	645	!
	646	!-- Determine and write CROSS parameters for the individual coordinate
	647	!-- systems
	648	DO j = 1, 10
	649	k = cross_ts_number_count(j)
	650	IF ( k /= 0 ) THEN
	651	!
	652	!-- Store curve numbers, colours and line style
	653	klist(1:k) = cross_ts_numbers(1:k,j)
	654	klist(k+1:10) = 999999
	655	!
	656	!-- Write CROSS parameter
	657	WRITE ( 90, CROSS )
	658
	659	ENDIF
	660	ENDDO
	661
	662	CLOSE ( 90 )
	663	!
	664	!-- Write all labels at the top of the data file, but only during the
	665	!-- first run of a sequence of jobs. The following jobs copy the time
	666	!-- series data to the bottom of that file.
	667	IF ( runnr == 0 ) THEN
	668	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	669	' ' // TRIM( region( file_id - 50 ) )
	670	ENDIF
	671
	672
	673	CASE ( 80 )
	674
	675	IF ( myid_char == '' ) THEN
[105]	676	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	677	FORM='FORMATTED', POSITION='APPEND' )
[1]	678	ELSE
	679	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	680	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	681	ENDIF
[809]	682	#if defined( __parallel ) && ! defined ( __check )
[1]	683	!
	684	!-- Set a barrier in order to allow that thereafter all other
	685	!-- processors in the directory created by PE0 can open their file.
	686	!-- WARNING: The following barrier will lead to hanging jobs, if
	687	!-- check_open is first called from routine
	688	!-- allocate_prt_memory!
	689	IF ( .NOT. openfile(80)%opened_before ) THEN
	690	CALL MPI_BARRIER( comm2d, ierr )
	691	ENDIF
	692	#endif
[105]	693	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	694	myid_char, &
[102]	695	FORM='FORMATTED', POSITION='APPEND' )
[1]	696	ENDIF
	697
	698	IF ( .NOT. openfile(80)%opened_before ) THEN
	699	WRITE ( 80, 8000 ) TRIM( run_description_header )
	700	ENDIF
	701
	702	CASE ( 81 )
	703
[102]	704	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	705	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	706
	707	CASE ( 82 )
	708
[102]	709	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	710	POSITION = 'APPEND' )
	711
	712	CASE ( 83 )
	713
[102]	714	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	715	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	716
	717	CASE ( 84 )
	718
[102]	719	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	720	POSITION='APPEND' )
	721
	722	CASE ( 85 )
	723
	724	IF ( myid_char == '' ) THEN
[105]	725	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	726	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	727	ELSE
	728	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	729	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	730	ENDIF
[809]	731	#if defined( __parallel ) && ! defined ( __check )
[1]	732	!
	733	!-- Set a barrier in order to allow that thereafter all other
	734	!-- processors in the directory created by PE0 can open their file
	735	CALL MPI_BARRIER( comm2d, ierr )
	736	#endif
[105]	737	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	738	myid_char, &
[102]	739	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	740	ENDIF
	741
	742	IF ( .NOT. openfile(85)%opened_before ) THEN
	743	WRITE ( 85 ) run_description_header
	744	!
	745	!-- Attention: change version number whenever the output format on
[849]	746	!-- unit 85 is changed (see also in routine
	747	!-- lpm_data_output_particles)
[1]	748	rtext = 'data format version 3.0'
	749	WRITE ( 85 ) rtext
	750	WRITE ( 85 ) number_of_particle_groups, &
	751	max_number_of_particle_groups
	752	WRITE ( 85 ) particle_groups
	753	ENDIF
	754
	755	#if defined( __netcdf )
	756	CASE ( 101, 111 )
	757	!
	758	!-- Set filename depending on unit number
	759	IF ( file_id == 101 ) THEN
[102]	760	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	761	av = 0
	762	ELSE
[102]	763	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	764	av = 1
	765	ENDIF
	766	!
[1031]	767	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	768	!-- be opened for extension, if its dimensions and variables match the
	769	!-- actual run.
	770	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	771
	772	IF ( netcdf_extend ) THEN
	773	!
[1031]	774	!-- Open an existing netCDF file for output
	775	CALL open_write_netcdf_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	776	!
	777	!-- Read header information and set all ids. If there is a mismatch
	778	!-- between the previuos and the actual run, netcdf_extend is returned
	779	!-- as .FALSE.
	780	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	781
	782	!
	783	!-- Remove the local file, if it can not be extended
	784	IF ( .NOT. netcdf_extend ) THEN
	785	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	786	CALL handle_netcdf_error( 'check_open', 21 )
[493]	787	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	788	ENDIF
	789
	790	ENDIF
	791
	792	IF ( .NOT. netcdf_extend ) THEN
	793	!
[1031]	794	!-- Create a new netCDF output file with requested netCDF format
	795	CALL create_netcdf_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	796
	797	!
[1]	798	!-- Define the header
	799	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	800
[493]	801	!
[1031]	802	!-- In case of parallel netCDF output, create flag file which tells
[493]	803	!-- combine_plot_fields that nothing is to do.
[1031]	804	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	805	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	806	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	807	CLOSE( 99 )
	808	ENDIF
	809
[1]	810	ENDIF
	811
	812	CASE ( 102, 112 )
	813	!
	814	!-- Set filename depending on unit number
	815	IF ( file_id == 102 ) THEN
[102]	816	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	817	av = 0
	818	ELSE
[102]	819	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	820	av = 1
	821	ENDIF
	822	!
[1031]	823	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	824	!-- be opened for extension, if its dimensions and variables match the
	825	!-- actual run.
	826	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	827
	828	IF ( netcdf_extend ) THEN
	829	!
[1031]	830	!-- Open an existing netCDF file for output
	831	CALL open_write_netcdf_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	832	!
	833	!-- Read header information and set all ids. If there is a mismatch
	834	!-- between the previuos and the actual run, netcdf_extend is returned
	835	!-- as .FALSE.
	836	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	837
	838	!
	839	!-- Remove the local file, if it can not be extended
	840	IF ( .NOT. netcdf_extend ) THEN
	841	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	842	CALL handle_netcdf_error( 'check_open', 24 )
[493]	843	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	844	ENDIF
	845
	846	ENDIF
	847
	848	IF ( .NOT. netcdf_extend ) THEN
	849	!
[1031]	850	!-- Create a new netCDF output file with requested netCDF format
	851	CALL create_netcdf_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	852
	853	!
[1]	854	!-- Define the header
	855	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	856
[493]	857	!
[1031]	858	!-- In case of parallel netCDF output, create flag file which tells
[493]	859	!-- combine_plot_fields that nothing is to do.
[1031]	860	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	861	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	862	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	863	CLOSE( 99 )
	864	ENDIF
	865
[1]	866	ENDIF
	867
	868	CASE ( 103, 113 )
	869	!
	870	!-- Set filename depending on unit number
	871	IF ( file_id == 103 ) THEN
[102]	872	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	873	av = 0
	874	ELSE
[102]	875	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	876	av = 1
	877	ENDIF
	878	!
[1031]	879	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	880	!-- be opened for extension, if its dimensions and variables match the
	881	!-- actual run.
	882	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	883
	884	IF ( netcdf_extend ) THEN
	885	!
[1031]	886	!-- Open an existing netCDF file for output
	887	CALL open_write_netcdf_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	888	!
	889	!-- Read header information and set all ids. If there is a mismatch
	890	!-- between the previuos and the actual run, netcdf_extend is returned
	891	!-- as .FALSE.
	892	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	893
	894	!
	895	!-- Remove the local file, if it can not be extended
	896	IF ( .NOT. netcdf_extend ) THEN
	897	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	898	CALL handle_netcdf_error( 'check_open', 27 )
[493]	899	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	900	ENDIF
	901
	902	ENDIF
	903
	904	IF ( .NOT. netcdf_extend ) THEN
	905	!
[1031]	906	!-- Create a new netCDF output file with requested netCDF format
	907	CALL create_netcdf_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	908
	909	!
[1]	910	!-- Define the header
	911	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	912
[493]	913	!
[1031]	914	!-- In case of parallel netCDF output, create flag file which tells
[493]	915	!-- combine_plot_fields that nothing is to do.
[1031]	916	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	917	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	918	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	919	CLOSE( 99 )
	920	ENDIF
	921
[1]	922	ENDIF
	923
	924	CASE ( 104 )
	925	!
[102]	926	!-- Set filename
	927	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	928
	929	!
[1031]	930	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	931	!-- be opened for extension, if its variables match the actual run.
[102]	932	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	933
	934	IF ( netcdf_extend ) THEN
	935	!
[1031]	936	!-- Open an existing netCDF file for output
	937	CALL open_write_netcdf_file( filename, id_set_pr, .FALSE., 29 )
[1]	938	!
	939	!-- Read header information and set all ids. If there is a mismatch
	940	!-- between the previuos and the actual run, netcdf_extend is returned
	941	!-- as .FALSE.
	942	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	943
	944	!
	945	!-- Remove the local file, if it can not be extended
	946	IF ( .NOT. netcdf_extend ) THEN
	947	nc_stat = NF90_CLOSE( id_set_pr )
[263]	948	CALL handle_netcdf_error( 'check_open', 30 )
[102]	949	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	950	ENDIF
	951
	952	ENDIF
	953
	954	IF ( .NOT. netcdf_extend ) THEN
	955	!
[1031]	956	!-- Create a new netCDF output file with requested netCDF format
	957	CALL create_netcdf_file( filename, id_set_pr, .FALSE., 31 )
[1]	958	!
	959	!-- Define the header
	960	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	961
	962	ENDIF
	963
	964	CASE ( 105 )
	965	!
[102]	966	!-- Set filename
	967	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	968
	969	!
[1031]	970	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	971	!-- be opened for extension, if its variables match the actual run.
[102]	972	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	973
	974	IF ( netcdf_extend ) THEN
	975	!
[1031]	976	!-- Open an existing netCDF file for output
	977	CALL open_write_netcdf_file( filename, id_set_ts, .FALSE., 32 )
[1]	978	!
	979	!-- Read header information and set all ids. If there is a mismatch
	980	!-- between the previuos and the actual run, netcdf_extend is returned
	981	!-- as .FALSE.
	982	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	983
	984	!
	985	!-- Remove the local file, if it can not be extended
	986	IF ( .NOT. netcdf_extend ) THEN
	987	nc_stat = NF90_CLOSE( id_set_ts )
[263]	988	CALL handle_netcdf_error( 'check_open', 33 )
[102]	989	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	990	ENDIF
	991
	992	ENDIF
	993
	994	IF ( .NOT. netcdf_extend ) THEN
	995	!
[1031]	996	!-- Create a new netCDF output file with requested netCDF format
	997	CALL create_netcdf_file( filename, id_set_ts, .FALSE., 34 )
[1]	998	!
	999	!-- Define the header
	1000	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	1001
	1002	ENDIF
	1003
	1004
	1005	CASE ( 106, 116 )
	1006	!
	1007	!-- Set filename depending on unit number
	1008	IF ( file_id == 106 ) THEN
[102]	1009	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	1010	av = 0
	1011	ELSE
[102]	1012	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	1013	av = 1
	1014	ENDIF
	1015	!
[1031]	1016	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	1017	!-- be opened for extension, if its dimensions and variables match the
	1018	!-- actual run.
	1019	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1020
	1021	IF ( netcdf_extend ) THEN
	1022	!
[1031]	1023	!-- Open an existing netCDF file for output
	1024	CALL open_write_netcdf_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	1025	!
	1026	!-- Read header information and set all ids. If there is a mismatch
	1027	!-- between the previuos and the actual run, netcdf_extend is returned
	1028	!-- as .FALSE.
	1029	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1030
	1031	!
	1032	!-- Remove the local file, if it can not be extended
	1033	IF ( .NOT. netcdf_extend ) THEN
	1034	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1035	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1036	CALL local_system('rm ' // TRIM( filename ) )
	1037	ENDIF
	1038
	1039	ENDIF
	1040
	1041	IF ( .NOT. netcdf_extend ) THEN
	1042	!
[1031]	1043	!-- Create a new netCDF output file with requested netCDF format
	1044	CALL create_netcdf_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	1045
	1046	!
[1]	1047	!-- Define the header
	1048	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1049
[493]	1050	!
[1031]	1051	!-- In case of parallel netCDF output, create flag file which tells
[493]	1052	!-- combine_plot_fields that nothing is to do.
[1031]	1053	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	1054	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1055	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1056	CLOSE( 99 )
	1057	ENDIF
	1058
[1]	1059	ENDIF
	1060
	1061
	1062	CASE ( 107 )
	1063	!
[102]	1064	!-- Set filename
	1065	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1066
	1067	!
[1031]	1068	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1069	!-- be opened for extension, if its variables match the actual run.
[102]	1070	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1071
	1072	IF ( netcdf_extend ) THEN
	1073	!
[1031]	1074	!-- Open an existing netCDF file for output
	1075	CALL open_write_netcdf_file( filename, id_set_sp, .FALSE., 38 )
[263]	1076
[1]	1077	!
	1078	!-- Read header information and set all ids. If there is a mismatch
	1079	!-- between the previuos and the actual run, netcdf_extend is returned
	1080	!-- as .FALSE.
	1081	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1082
	1083	!
	1084	!-- Remove the local file, if it can not be extended
	1085	IF ( .NOT. netcdf_extend ) THEN
	1086	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1087	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1088	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1089	ENDIF
	1090
	1091	ENDIF
	1092
	1093	IF ( .NOT. netcdf_extend ) THEN
	1094	!
[1031]	1095	!-- Create a new netCDF output file with requested netCDF format
	1096	CALL create_netcdf_file( filename, id_set_sp, .FALSE., 40 )
[1]	1097	!
	1098	!-- Define the header
	1099	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1100
	1101	ENDIF
	1102
	1103
	1104	CASE ( 108 )
	1105
	1106	IF ( myid_char == '' ) THEN
[102]	1107	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1108	ELSE
[105]	1109	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1110	myid_char
[1]	1111	ENDIF
	1112	!
[1031]	1113	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1114	!-- be opened for extension, if its variables match the actual run.
	1115	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1116
	1117	IF ( netcdf_extend ) THEN
	1118	!
[1031]	1119	!-- Open an existing netCDF file for output
	1120	CALL open_write_netcdf_file( filename, id_set_prt, .FALSE., 41 )
[1]	1121	!
	1122	!-- Read header information and set all ids. If there is a mismatch
	1123	!-- between the previuos and the actual run, netcdf_extend is returned
	1124	!-- as .FALSE.
	1125	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1126
	1127	!
	1128	!-- Remove the local file, if it can not be extended
	1129	IF ( .NOT. netcdf_extend ) THEN
	1130	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1131	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1132	CALL local_system( 'rm ' // filename )
	1133	ENDIF
	1134
	1135	ENDIF
	1136
	1137	IF ( .NOT. netcdf_extend ) THEN
	1138
	1139	!
	1140	!-- For runs on multiple processors create the subdirectory
	1141	IF ( myid_char /= '' ) THEN
	1142	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1143	THEN ! needs modification in case of non-extendable sets
[102]	1144	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1145	TRIM( coupling_char ) // '/' )
[1]	1146	ENDIF
[809]	1147	#if defined( __parallel ) && ! defined ( __check )
[807]	1148	!
[1]	1149	!-- Set a barrier in order to allow that all other processors in the
	1150	!-- directory created by PE0 can open their file
	1151	CALL MPI_BARRIER( comm2d, ierr )
	1152	#endif
	1153	ENDIF
	1154
	1155	!
[1031]	1156	!-- Create a new netCDF output file with requested netCDF format
	1157	CALL create_netcdf_file( filename, id_set_prt, .FALSE., 43 )
[519]	1158
	1159	!
[1]	1160	!-- Define the header
	1161	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1162
	1163	ENDIF
	1164
	1165	CASE ( 109 )
	1166	!
[102]	1167	!-- Set filename
	1168	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1169
	1170	!
[1031]	1171	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1172	!-- be opened for extension, if its variables match the actual run.
[102]	1173	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1174
	1175	IF ( netcdf_extend ) THEN
	1176	!
[1031]	1177	!-- Open an existing netCDF file for output
	1178	CALL open_write_netcdf_file( filename, id_set_pts, .FALSE., 393 )
[1]	1179	!
	1180	!-- Read header information and set all ids. If there is a mismatch
	1181	!-- between the previuos and the actual run, netcdf_extend is returned
	1182	!-- as .FALSE.
	1183	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1184
	1185	!
	1186	!-- Remove the local file, if it can not be extended
	1187	IF ( .NOT. netcdf_extend ) THEN
	1188	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1189	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1190	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1191	ENDIF
	1192
	1193	ENDIF
	1194
	1195	IF ( .NOT. netcdf_extend ) THEN
	1196	!
[1031]	1197	!-- Create a new netCDF output file with requested netCDF format
	1198	CALL create_netcdf_file( filename, id_set_pts, .FALSE., 395 )
[1]	1199	!
	1200	!-- Define the header
	1201	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1202
	1203	ENDIF
[410]	1204
[564]	1205	CASE ( 201:200+2*max_masks )
[410]	1206	!
	1207	!-- Set filename depending on unit number
[564]	1208	IF ( file_id <= 200+max_masks ) THEN
	1209	mid = file_id - 200
[410]	1210	WRITE ( mask_char,'(I2.2)') mid
	1211	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
	1212	av = 0
	1213	ELSE
[564]	1214	mid = file_id - (200+max_masks)
[410]	1215	WRITE ( mask_char,'(I2.2)') mid
	1216	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
	1217	coupling_char
	1218	av = 1
	1219	ENDIF
	1220	!
[1031]	1221	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1222	!-- be opened for extension, if its dimensions and variables match the
	1223	!-- actual run.
	1224	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1225
	1226	IF ( netcdf_extend ) THEN
	1227	!
[1031]	1228	!-- Open an existing netCDF file for output
	1229	CALL open_write_netcdf_file( filename, id_set_mask(mid,av), &
	1230	.TRUE., 456 )
[410]	1231	!
	1232	!-- Read header information and set all ids. If there is a mismatch
	1233	!-- between the previuos and the actual run, netcdf_extend is returned
	1234	!-- as .FALSE.
	1235	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
[1]	1236
[410]	1237	!
	1238	!-- Remove the local file, if it can not be extended
	1239	IF ( .NOT. netcdf_extend ) THEN
	1240	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[564]	1241	CALL handle_netcdf_error( 'check_open', 457 )
[410]	1242	CALL local_system('rm ' // TRIM( filename ) )
	1243	ENDIF
[1]	1244
[410]	1245	ENDIF
	1246
	1247	IF ( .NOT. netcdf_extend ) THEN
[1]	1248	!
[1031]	1249	!-- Create a new netCDF output file with requested netCDF format
	1250	CALL create_netcdf_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1251	!
[410]	1252	!-- Define the header
	1253	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
	1254
	1255	ENDIF
	1256
	1257
	1258	#else
	1259
[564]	1260	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1261
	1262	!
[1]	1263	!-- Nothing is done in case of missing netcdf support
	1264	RETURN
	1265
	1266	#endif
	1267
	1268	CASE DEFAULT
	1269
[247]	1270	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1271	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1272
	1273	END SELECT
	1274
	1275	!
	1276	!-- Set open flag
	1277	openfile(file_id)%opened = .TRUE.
	1278
	1279	!
	1280	!-- Formats
	1281	3300 FORMAT ('#'/ &
	1282	'coord 1 file=',A,' filetype=unformatted'/ &
	1283	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1284	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1285	'#')
	1286	4000 FORMAT ('# ',A)
	1287	5000 FORMAT ('# ',A/ &
	1288	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1289	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1290	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1291	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1292	8000 FORMAT (A/ &
	1293	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1294	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1295	103('-'))
	1296
	1297	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |