Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 1041

Last change on this file since 1041 was 1037, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 46.0 KB

Rev	Line
[247]	1	SUBROUTINE check_open( file_id )
[1]	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[247]	20	! Current revisions:
[1]	21	! -----------------
	22	!
[1035]	23	!
[1]	24	! Former revisions:
	25	! -----------------
[3]	26	! $Id: check_open.f90 1037 2012-10-22 14:10:22Z raasch $
[810]	27	!
[1037]	28	! 1036 2012-10-22 13:43:42Z raasch
	29	! code put under GPL (PALM 3.9)
	30	!
[1035]	31	! 1031 2012-10-19 14:35:30Z raasch
	32	! netCDF4 without parallel file support implemented,
	33	! opening of netCDF files are done by new routines create_netcdf_file and
	34	! open_write_netcdf_file
	35	!
[965]	36	! 964 2012-07-26 09:14:24Z raasch
	37	! old profil-units (40:49) removed,
	38	! append feature removed from unit 14
	39	!
[850]	40	! 849 2012-03-15 10:35:09Z raasch
	41	! comment changed
	42	!
[810]	43	! 809 2012-01-30 13:32:58Z maronga
	44	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	45	!
[808]	46	! 807 2012-01-25 11:53:51Z maronga
	47	! New cpp directive "__check" implemented which is used by check_namelist_files
	48	!
[766]	49	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
[77]	50	!
[668]	51	! 667 2010-12-23 12:06:00Z suehring/gryschka
	52	! Output of total array size was adapted to nbgp.
	53	!
[601]	54	! 600 2010-11-24 16:10:51Z raasch
	55	! bugfix in opening of cross section netcdf-files (parallel opening with
	56	! netcdf4 only works for netcdf_data_format > 2)
	57	!
[565]	58	! 564 2010-09-30 13:18:59Z helmke
	59	! start number of mask output files changed to 201, netcdf message identifiers
	60	! of masked output changed
	61	!
[520]	62	! 519 2010-03-19 05:30:02Z raasch
[1031]	63	! netCDF4 support for particle data
[520]	64	!
[494]	65	! 493 2010-03-01 08:30:24Z raasch
[1031]	66	! netCDF4 support (parallel output)
[494]	67	!
[449]	68	! 410 2009-12-04 17:05:40Z letzel
	69	! masked data output
	70	!
[392]	71	! 277 2009-03-31 09:13:47Z heinze
[1031]	72	! Output of netCDF messages with aid of message handling routine.
[392]	73	! Output of messages replaced by message handling routine
	74	!
[198]	75	! 146 2008-01-17 13:08:34Z raasch
	76	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
	77	! because only this file contains the global variables,
	78	! myid_char_14 removed
	79	!
[139]	80	! 120 2007-10-17 11:54:43Z raasch
[1031]	81	! Status of 3D-volume netCDF data file only depends on switch netcdf_64bit_3d
[139]	82	!
[110]	83	! 105 2007-08-08 07:12:55Z raasch
	84	! Different filenames are used in case of a coupled simulation,
	85	! coupling_char added to all relevant filenames
	86	!
[83]	87	! 82 2007-04-16 15:40:52Z raasch
	88	! Call of local_getenv removed, preprocessor directives for old systems removed
	89	!
[77]	90	! 46 2007-03-05 06:00:47Z raasch
	91	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
	92	!
[3]	93	! RCS Log replace by Id keyword, revision history cleaned up
	94	!
[1]	95	! Revision 1.44 2006/08/22 13:48:34 raasch
	96	! xz and yz cross sections now up to nzt+1
	97	!
	98	! Revision 1.1 1997/08/11 06:10:55 raasch
	99	! Initial revision
	100	!
	101	!
	102	! Description:
	103	! ------------
	104	! Check if file unit is open. If not, open file and, if necessary, write a
	105	! header or start other initializing actions, respectively.
	106	!------------------------------------------------------------------------------!
	107
	108	USE array_kind
	109	USE arrays_3d
	110	USE control_parameters
	111	USE grid_variables
	112	USE indices
	113	USE netcdf_control
	114	USE particle_attributes
	115	USE pegrid
	116	USE profil_parameter
	117	USE statistics
	118
	119	IMPLICIT NONE
	120
[410]	121	CHARACTER (LEN=2) :: mask_char, suffix
[82]	122	CHARACTER (LEN=20) :: xtext = 'time in s'
[1]	123	CHARACTER (LEN=30) :: filename
	124	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
	125	avs_data_file_localname
	126	CHARACTER (LEN=80) :: rtext
	127	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
	128	batch_scp, zeile
	129	CHARACTER (LEN=400) :: command
	130
	131	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
	132	j, k, legpos = 1, timodex = 1
	133	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
	134
	135	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
	136	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
	137	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
	138
	139	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
	140	sizex = 250.0, sizey = 40.0, texfac = 1.5
	141
	142	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
	143	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
	144
	145
	146	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
	147	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
	148	rand, rlegfak, sizex, sizey, texfac, &
	149	timodex, twoxa, twoya, xtext
	150
	151
	152	!
	153	!-- Immediate return if file already open
	154	IF ( openfile(file_id)%opened ) RETURN
	155
[809]	156	#if ! defined ( __check )
[1]	157	!
	158	!-- Only certain files are allowed to be re-opened
	159	!-- NOTE: some of the other files perhaps also could be re-opened, but it
	160	!-- has not been checked so far, if it works!
	161	IF ( openfile(file_id)%opened_before ) THEN
	162	SELECT CASE ( file_id )
[143]	163	CASE ( 13, 14, 21, 22, 23, 80:85 )
[1]	164	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
[247]	165	message_string = 're-open of unit ' // &
[274]	166	'14 is not verified. Please check results!'
[247]	167	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
[1]	168	ENDIF
[143]	169
[1]	170	CASE DEFAULT
[247]	171	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
[274]	172	' is not allowed'
[247]	173	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
	174
[1]	175	RETURN
[143]	176
[1]	177	END SELECT
	178	ENDIF
[807]	179	#endif
[1]	180
	181	!
	182	!-- Check if file may be opened on the relevant PE
	183	SELECT CASE ( file_id )
	184
[964]	185	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109 )
[410]	186
[493]	187	IF ( myid /= 0 ) THEN
	188	WRITE( message_string, * ) 'opening file-id ',file_id, &
	189	' not allowed for PE ',myid
	190	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	191	ENDIF
	192
[564]	193	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
[493]	194
[1031]	195	IF ( netcdf_data_format < 5 ) THEN
[247]	196
[410]	197	IF ( myid /= 0 ) THEN
	198	WRITE( message_string, * ) 'opening file-id ',file_id, &
	199	' not allowed for PE ',myid
	200	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
	201	ENDIF
	202
[493]	203	ENDIF
[1]	204
	205	CASE ( 21, 22, 23 )
	206
	207	IF ( .NOT. data_output_2d_on_each_pe ) THEN
	208	IF ( myid /= 0 ) THEN
[247]	209	WRITE( message_string, * ) 'opening file-id ',file_id, &
	210	' not allowed for PE ',myid
[277]	211	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
[247]	212	END IF
[1]	213	ENDIF
	214
	215	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
	216
	217	!
	218	!-- File-ids that are used temporarily in other routines
[247]	219	WRITE( message_string, * ) 'opening file-id ',file_id, &
[274]	220	' is not allowed since it is used otherwise'
[247]	221	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
	222
[1]	223	END SELECT
	224
	225	!
	226	!-- Open relevant files
	227	SELECT CASE ( file_id )
	228
	229	CASE ( 11 )
	230
[807]	231	#if defined ( __check )
	232	!
	233	!-- In case of a prior parameter file check, the p3d data is stored in
	234	!-- PARIN, while the p3df is stored in PARINF. This only applies to
	235	!-- check_namelist_files!
	236	IF ( check_restart == 2 ) THEN
	237	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
	238	STATUS='OLD' )
	239	ELSE
	240	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	241	STATUS='OLD' )
	242	END IF
	243	#else
	244
[102]	245	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
	246	STATUS='OLD' )
[807]	247	#endif
[1]	248
	249	CASE ( 13 )
	250
	251	IF ( myid_char == '' ) THEN
[102]	252	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
	253	FORM='UNFORMATTED', STATUS='OLD' )
[1]	254	ELSE
[143]	255	!
	256	!-- First opening of unit 13 openes file _0000 on all PEs because only
	257	!-- this file contains the global variables
	258	IF ( .NOT. openfile(file_id)%opened_before ) THEN
	259	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
	260	FORM='UNFORMATTED', STATUS='OLD' )
	261	ELSE
	262	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
	263	FORM='UNFORMATTED', STATUS='OLD' )
	264	ENDIF
[1]	265	ENDIF
	266
	267	CASE ( 14 )
	268
	269	IF ( myid_char == '' ) THEN
[102]	270	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
	271	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	272	ELSE
	273	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	274	CALL local_system( 'mkdir BINOUT' // coupling_char )
[1]	275	ENDIF
[809]	276	#if defined( __parallel ) && ! defined ( __check )
[1]	277	!
	278	!-- Set a barrier in order to allow that all other processors in the
	279	!-- directory created by PE0 can open their file
	280	CALL MPI_BARRIER( comm2d, ierr )
	281	#endif
[146]	282	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
[887]	283	FORM='UNFORMATTED' )
[1]	284	ENDIF
	285
	286	CASE ( 15 )
	287
[102]	288	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
[1]	289
	290	CASE ( 16 )
	291
[102]	292	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
[1]	293
	294	CASE ( 17 )
	295
[102]	296	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
[1]	297
	298	CASE ( 18 )
	299
[102]	300	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
[1]	301
	302	CASE ( 19 )
	303
[102]	304	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
[1]	305
	306	CASE ( 20 )
	307
	308	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
[102]	309	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
[1]	310	ENDIF
	311	IF ( myid_char == '' ) THEN
[105]	312	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
[102]	313	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	314	ELSE
[809]	315	#if defined( __parallel ) && ! defined ( __check )
[1]	316	!
	317	!-- Set a barrier in order to allow that all other processors in the
	318	!-- directory created by PE0 can open their file
	319	CALL MPI_BARRIER( comm2d, ierr )
	320	#endif
[105]	321	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
[102]	322	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	323	ENDIF
	324
	325	CASE ( 21 )
	326
	327	IF ( data_output_2d_on_each_pe ) THEN
[105]	328	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
[102]	329	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	330	ELSE
[102]	331	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
	332	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	333	ENDIF
	334
	335	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	336	!
	337	!-- Output for combine_plot_fields
	338	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	339	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
[1]	340	WRITE (21) 0, nx+1, 0, ny+1 ! output part
	341	ENDIF
	342	!
	343	!-- Determine and write ISO2D coordiante header
	344	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
	345	hu = 0.0
	346	ho = (ny+1) * dy
	347	DO i = 1, ny
	348	eta(i) = REAL( i ) / ( ny + 1.0 )
	349	ENDDO
	350	eta(0) = 0.0
	351	eta(ny+1) = 1.0
	352
	353	WRITE (21) dx,eta,hu,ho
	354	DEALLOCATE( eta, ho, hu )
	355
	356	!
	357	!-- Create output file for local parameters
	358	IF ( iso2d_output ) THEN
[102]	359	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
	360	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	361	openfile(27)%opened = .TRUE.
	362	ENDIF
	363
	364	ENDIF
	365
	366	CASE ( 22 )
	367
	368	IF ( data_output_2d_on_each_pe ) THEN
[105]	369	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
[102]	370	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	371	ELSE
[102]	372	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
[1]	373	POSITION='APPEND' )
	374	ENDIF
	375
	376	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	377	!
	378	!-- Output for combine_plot_fields
	379	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	380	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
[1]	381	WRITE (22) 0, nx+1, 0, nz+1 ! output part
	382	ENDIF
	383	!
	384	!-- Determine and write ISO2D coordiante header
	385	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
	386	hu = 0.0
	387	ho = zu(nz+1)
	388	DO i = 1, nz
	389	eta(i) = REAL( zu(i) ) / zu(nz+1)
	390	ENDDO
	391	eta(0) = 0.0
	392	eta(nz+1) = 1.0
	393
	394	WRITE (22) dx,eta,hu,ho
	395	DEALLOCATE( eta, ho, hu )
	396	!
	397	!-- Create output file for local parameters
[102]	398	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
	399	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	400	openfile(28)%opened = .TRUE.
	401
	402	ENDIF
	403
	404	CASE ( 23 )
	405
	406	IF ( data_output_2d_on_each_pe ) THEN
[105]	407	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
[102]	408	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	409	ELSE
[102]	410	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
[1]	411	POSITION='APPEND' )
	412	ENDIF
	413
	414	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
	415	!
	416	!-- Output for combine_plot_fields
	417	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
[667]	418	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
[1]	419	WRITE (23) 0, ny+1, 0, nz+1 ! output part
	420	ENDIF
	421	!
	422	!-- Determine and write ISO2D coordiante header
	423	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
	424	hu = 0.0
	425	ho = zu(nz+1)
	426	DO i = 1, nz
	427	eta(i) = REAL( zu(i) ) / zu(nz+1)
	428	ENDDO
	429	eta(0) = 0.0
	430	eta(nz+1) = 1.0
	431
	432	WRITE (23) dx,eta,hu,ho
	433	DEALLOCATE( eta, ho, hu )
	434	!
	435	!-- Create output file for local parameters
[102]	436	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
	437	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	438	openfile(29)%opened = .TRUE.
	439
	440	ENDIF
	441
	442	CASE ( 30 )
	443
[105]	444	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
[102]	445	FORM='UNFORMATTED' )
[1]	446	!
	447	!-- Write coordinate file for AVS
	448	IF ( myid == 0 ) THEN
	449	#if defined( __parallel )
	450	!
	451	!-- Specifications for combine_plot_fields
	452	IF ( .NOT. do3d_compress ) THEN
[667]	453	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
[1]	454	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
	455	ENDIF
	456	#endif
	457	!
	458	!-- Write coordinate file for AVS:
	459	!-- First determine file names (including cyle numbers) of AVS files on
	460	!-- target machine (to which the files are to be transferred).
	461	!-- Therefore path information has to be obtained first.
	462	IF ( avs_output ) THEN
[82]	463	iaddres = LEN_TRIM( return_addres )
	464	iusern = LEN_TRIM( return_username )
[1]	465
	466	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
	467	DO WHILE ( .NOT. avs_coor_file_found .OR. &
	468	.NOT. avs_data_file_found )
	469
	470	READ ( 3, '(A)', END=1 ) zeile
	471
	472	SELECT CASE ( zeile(1:11) )
	473
	474	CASE ( 'PLOT3D_COOR' )
	475	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
	476	avs_coor_file_localname
	477	avs_coor_file_found = .TRUE.
	478
	479	CASE ( 'PLOT3D_DATA' )
	480	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
	481	avs_data_file_localname
	482	avs_data_file_found = .TRUE.
	483
	484	CASE DEFAULT
	485	READ ( 3, '(A/A)' ) zeile, zeile
	486
	487	END SELECT
	488
	489	ENDDO
	490	!
	491	!-- Now the cycle numbers on the remote machine must be obtained
	492	!-- using batch_scp
	493	1 CLOSE ( 3 )
	494	IF ( .NOT. avs_coor_file_found .OR. &
	495	.NOT. avs_data_file_found ) THEN
[274]	496	message_string= 'no filename for AVS-data-file ' // &
	497	'found in MRUN-config-file' // &
[247]	498	' &filename in FLD-file set to "unknown"'
	499	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
[1]	500
	501	avs_coor_file = 'unknown'
	502	avs_data_file = 'unknown'
	503	ELSE
	504	get_filenames = .TRUE.
	505	IF ( TRIM( host ) == 'hpmuk' .OR. &
	506	TRIM( host ) == 'lcmuk' ) THEN
	507	batch_scp = '/home/raasch/pub/batch_scp'
	508	ELSEIF ( TRIM( host ) == 'nech' ) THEN
	509	batch_scp = '/ipf/b/b323011/pub/batch_scp'
	510	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
	511	TRIM( host ) == 'ibmb' ) THEN
	512	batch_scp = '/home/h/niksiraa/pub/batch_scp'
	513	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
	514	batch_scp = '/home/nhbksira/pub/batch_scp'
	515	ELSE
[247]	516	message_string= 'no path for batch_scp on host "' // &
	517	TRIM( host ) // '"'
	518	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
[1]	519	get_filenames = .FALSE.
	520	ENDIF
	521
	522	IF ( get_filenames ) THEN
	523	!
	524	!-- Determine the coordinate file name.
	525	!-- /etc/passwd serves as Dummy-Datei, because it is not
	526	!-- really transferred.
	527	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	528	return_username(1:iusern) // ' ' // &
[1]	529	return_addres(1:iaddres) // ' /etc/passwd "' // &
	530	TRIM( avs_coor_file_catalog ) // '" ' // &
	531	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
	532
	533	CALL local_system( command )
	534	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	535	READ ( 3, '(A)' ) avs_coor_file
	536	CLOSE ( 3 )
	537	!
	538	!-- Determine the data file name
	539	command = TRIM( batch_scp ) // ' -n -u ' // &
[82]	540	return_username(1:iusern) // ' ' // &
[1]	541	return_addres(1:iaddres) // ' /etc/passwd "' // &
	542	TRIM( avs_data_file_catalog ) // '" ' // &
	543	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
	544
	545	CALL local_system( command )
	546	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
	547	READ ( 3, '(A)' ) avs_data_file
	548	CLOSE ( 3 )
	549
	550	ELSE
	551
	552	avs_coor_file = 'unknown'
	553	avs_data_file = 'unknown'
	554
	555	ENDIF
	556
	557	ENDIF
	558
	559	!
	560	!-- Output of the coordinate file description for FLD-file
	561	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
	562	openfile(33)%opened = .TRUE.
	563	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
[667]	564	TRIM( avs_coor_file ), (nx+2nbgp)4, &
	565	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
[1]	566
	567
	568	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
	569	DO i = 0, nx+1
	570	xkoor(i) = i * dx
	571	ENDDO
	572	DO j = 0, ny+1
	573	ykoor(j) = j * dy
	574	ENDDO
	575	DO k = 0, nz_do3d
	576	zkoor(k) = zu(k)
	577	ENDDO
	578
	579	!
	580	!-- Create and write on AVS coordinate file
	581	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
	582	openfile(31)%opened = .TRUE.
	583
	584	WRITE (31) xkoor, ykoor, zkoor
	585	DEALLOCATE( xkoor, ykoor, zkoor )
	586
	587	!
	588	!-- Create FLD file (being written on in close_file)
	589	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
	590	openfile(32)%opened = .TRUE.
	591
	592	!
	593	!-- Create flag file for compressed 3D output,
	594	!-- influences output commands in mrun
	595	IF ( do3d_compress ) THEN
	596	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
	597	WRITE ( 3, '(1X)' )
	598	CLOSE ( 3 )
	599	ENDIF
	600
	601	ENDIF
	602
	603	ENDIF
	604
	605	!
	606	!-- In case of data compression output of the coordinates of the
	607	!-- corresponding partial array of a PE only once at the top of the file
	608	IF ( avs_output .AND. do3d_compress ) THEN
[667]	609	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
[1]	610	ENDIF
	611
	612	CASE ( 50:59 )
	613
	614	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
	615	suffix = ''
	616	ELSE
	617	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
	618	ENDIF
[105]	619	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
	620	TRIM( suffix ), &
[102]	621	FORM='FORMATTED', RECL=496 )
[1]	622	!
	623	!-- Write PROFIL parameter file for output of time series
	624	!-- NOTE: To be on the safe side, this output is done at the beginning of
	625	!-- the model run (in case of collapse) and it is repeated in
	626	!-- close_file, then, however, with value ranges for the coordinate
	627	!-- systems
	628	!
	629	!-- Firstly determine the number of the coordinate systems to be drawn
	630	cranz = 0
	631	DO j = 1, 10
	632	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
	633	ENDDO
	634	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
	635	TRIM( region( file_id - 50 ) )
	636	!
	637	!-- Write RAHMEN parameter
[105]	638	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
	639	TRIM( suffix ), &
[102]	640	FORM='FORMATTED', DELIM='APOSTROPHE' )
[1]	641	WRITE ( 90, RAHMEN )
	642	!
	643	!-- Determine and write CROSS parameters for the individual coordinate
	644	!-- systems
	645	DO j = 1, 10
	646	k = cross_ts_number_count(j)
	647	IF ( k /= 0 ) THEN
	648	!
	649	!-- Store curve numbers, colours and line style
	650	klist(1:k) = cross_ts_numbers(1:k,j)
	651	klist(k+1:10) = 999999
	652	!
	653	!-- Write CROSS parameter
	654	WRITE ( 90, CROSS )
	655
	656	ENDIF
	657	ENDDO
	658
	659	CLOSE ( 90 )
	660	!
	661	!-- Write all labels at the top of the data file, but only during the
	662	!-- first run of a sequence of jobs. The following jobs copy the time
	663	!-- series data to the bottom of that file.
	664	IF ( runnr == 0 ) THEN
	665	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
	666	' ' // TRIM( region( file_id - 50 ) )
	667	ENDIF
	668
	669
	670	CASE ( 80 )
	671
	672	IF ( myid_char == '' ) THEN
[105]	673	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
[102]	674	FORM='FORMATTED', POSITION='APPEND' )
[1]	675	ELSE
	676	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
[102]	677	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
[1]	678	ENDIF
[809]	679	#if defined( __parallel ) && ! defined ( __check )
[1]	680	!
	681	!-- Set a barrier in order to allow that thereafter all other
	682	!-- processors in the directory created by PE0 can open their file.
	683	!-- WARNING: The following barrier will lead to hanging jobs, if
	684	!-- check_open is first called from routine
	685	!-- allocate_prt_memory!
	686	IF ( .NOT. openfile(80)%opened_before ) THEN
	687	CALL MPI_BARRIER( comm2d, ierr )
	688	ENDIF
	689	#endif
[105]	690	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
	691	myid_char, &
[102]	692	FORM='FORMATTED', POSITION='APPEND' )
[1]	693	ENDIF
	694
	695	IF ( .NOT. openfile(80)%opened_before ) THEN
	696	WRITE ( 80, 8000 ) TRIM( run_description_header )
	697	ENDIF
	698
	699	CASE ( 81 )
	700
[102]	701	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
[1]	702	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	703
	704	CASE ( 82 )
	705
[102]	706	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
[1]	707	POSITION = 'APPEND' )
	708
	709	CASE ( 83 )
	710
[102]	711	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
[1]	712	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
	713
	714	CASE ( 84 )
	715
[102]	716	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
[1]	717	POSITION='APPEND' )
	718
	719	CASE ( 85 )
	720
	721	IF ( myid_char == '' ) THEN
[105]	722	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
[102]	723	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	724	ELSE
	725	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
[102]	726	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
[1]	727	ENDIF
[809]	728	#if defined( __parallel ) && ! defined ( __check )
[1]	729	!
	730	!-- Set a barrier in order to allow that thereafter all other
	731	!-- processors in the directory created by PE0 can open their file
	732	CALL MPI_BARRIER( comm2d, ierr )
	733	#endif
[105]	734	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
	735	myid_char, &
[102]	736	FORM='UNFORMATTED', POSITION='APPEND' )
[1]	737	ENDIF
	738
	739	IF ( .NOT. openfile(85)%opened_before ) THEN
	740	WRITE ( 85 ) run_description_header
	741	!
	742	!-- Attention: change version number whenever the output format on
[849]	743	!-- unit 85 is changed (see also in routine
	744	!-- lpm_data_output_particles)
[1]	745	rtext = 'data format version 3.0'
	746	WRITE ( 85 ) rtext
	747	WRITE ( 85 ) number_of_particle_groups, &
	748	max_number_of_particle_groups
	749	WRITE ( 85 ) particle_groups
	750	ENDIF
	751
	752	#if defined( __netcdf )
	753	CASE ( 101, 111 )
	754	!
	755	!-- Set filename depending on unit number
	756	IF ( file_id == 101 ) THEN
[102]	757	filename = 'DATA_2D_XY_NETCDF' // coupling_char
[1]	758	av = 0
	759	ELSE
[102]	760	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
[1]	761	av = 1
	762	ENDIF
	763	!
[1031]	764	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	765	!-- be opened for extension, if its dimensions and variables match the
	766	!-- actual run.
	767	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	768
	769	IF ( netcdf_extend ) THEN
	770	!
[1031]	771	!-- Open an existing netCDF file for output
	772	CALL open_write_netcdf_file( filename, id_set_xy(av), .TRUE., 20 )
[1]	773	!
	774	!-- Read header information and set all ids. If there is a mismatch
	775	!-- between the previuos and the actual run, netcdf_extend is returned
	776	!-- as .FALSE.
	777	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	778
	779	!
	780	!-- Remove the local file, if it can not be extended
	781	IF ( .NOT. netcdf_extend ) THEN
	782	nc_stat = NF90_CLOSE( id_set_xy(av) )
[263]	783	CALL handle_netcdf_error( 'check_open', 21 )
[493]	784	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	785	ENDIF
	786
	787	ENDIF
	788
	789	IF ( .NOT. netcdf_extend ) THEN
	790	!
[1031]	791	!-- Create a new netCDF output file with requested netCDF format
	792	CALL create_netcdf_file( filename, id_set_xy(av), .TRUE., 22 )
[493]	793
	794	!
[1]	795	!-- Define the header
	796	CALL define_netcdf_header( 'xy', netcdf_extend, av )
	797
[493]	798	!
[1031]	799	!-- In case of parallel netCDF output, create flag file which tells
[493]	800	!-- combine_plot_fields that nothing is to do.
[1031]	801	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	802	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
	803	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	804	CLOSE( 99 )
	805	ENDIF
	806
[1]	807	ENDIF
	808
	809	CASE ( 102, 112 )
	810	!
	811	!-- Set filename depending on unit number
	812	IF ( file_id == 102 ) THEN
[102]	813	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
[1]	814	av = 0
	815	ELSE
[102]	816	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
[1]	817	av = 1
	818	ENDIF
	819	!
[1031]	820	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	821	!-- be opened for extension, if its dimensions and variables match the
	822	!-- actual run.
	823	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	824
	825	IF ( netcdf_extend ) THEN
	826	!
[1031]	827	!-- Open an existing netCDF file for output
	828	CALL open_write_netcdf_file( filename, id_set_xz(av), .TRUE., 23 )
[1]	829	!
	830	!-- Read header information and set all ids. If there is a mismatch
	831	!-- between the previuos and the actual run, netcdf_extend is returned
	832	!-- as .FALSE.
	833	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	834
	835	!
	836	!-- Remove the local file, if it can not be extended
	837	IF ( .NOT. netcdf_extend ) THEN
	838	nc_stat = NF90_CLOSE( id_set_xz(av) )
[263]	839	CALL handle_netcdf_error( 'check_open', 24 )
[493]	840	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	841	ENDIF
	842
	843	ENDIF
	844
	845	IF ( .NOT. netcdf_extend ) THEN
	846	!
[1031]	847	!-- Create a new netCDF output file with requested netCDF format
	848	CALL create_netcdf_file( filename, id_set_xz(av), .TRUE., 25 )
[493]	849
	850	!
[1]	851	!-- Define the header
	852	CALL define_netcdf_header( 'xz', netcdf_extend, av )
	853
[493]	854	!
[1031]	855	!-- In case of parallel netCDF output, create flag file which tells
[493]	856	!-- combine_plot_fields that nothing is to do.
[1031]	857	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	858	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
	859	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	860	CLOSE( 99 )
	861	ENDIF
	862
[1]	863	ENDIF
	864
	865	CASE ( 103, 113 )
	866	!
	867	!-- Set filename depending on unit number
	868	IF ( file_id == 103 ) THEN
[102]	869	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
[1]	870	av = 0
	871	ELSE
[102]	872	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
[1]	873	av = 1
	874	ENDIF
	875	!
[1031]	876	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	877	!-- be opened for extension, if its dimensions and variables match the
	878	!-- actual run.
	879	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	880
	881	IF ( netcdf_extend ) THEN
	882	!
[1031]	883	!-- Open an existing netCDF file for output
	884	CALL open_write_netcdf_file( filename, id_set_yz(av), .TRUE., 26 )
[1]	885	!
	886	!-- Read header information and set all ids. If there is a mismatch
	887	!-- between the previuos and the actual run, netcdf_extend is returned
	888	!-- as .FALSE.
	889	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	890
	891	!
	892	!-- Remove the local file, if it can not be extended
	893	IF ( .NOT. netcdf_extend ) THEN
	894	nc_stat = NF90_CLOSE( id_set_yz(av) )
[263]	895	CALL handle_netcdf_error( 'check_open', 27 )
[493]	896	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
[1]	897	ENDIF
	898
	899	ENDIF
	900
	901	IF ( .NOT. netcdf_extend ) THEN
	902	!
[1031]	903	!-- Create a new netCDF output file with requested netCDF format
	904	CALL create_netcdf_file( filename, id_set_yz(av), .TRUE., 28 )
[493]	905
	906	!
[1]	907	!-- Define the header
	908	CALL define_netcdf_header( 'yz', netcdf_extend, av )
	909
[493]	910	!
[1031]	911	!-- In case of parallel netCDF output, create flag file which tells
[493]	912	!-- combine_plot_fields that nothing is to do.
[1031]	913	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	914	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
	915	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	916	CLOSE( 99 )
	917	ENDIF
	918
[1]	919	ENDIF
	920
	921	CASE ( 104 )
	922	!
[102]	923	!-- Set filename
	924	filename = 'DATA_1D_PR_NETCDF' // coupling_char
	925
	926	!
[1031]	927	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	928	!-- be opened for extension, if its variables match the actual run.
[102]	929	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	930
	931	IF ( netcdf_extend ) THEN
	932	!
[1031]	933	!-- Open an existing netCDF file for output
	934	CALL open_write_netcdf_file( filename, id_set_pr, .FALSE., 29 )
[1]	935	!
	936	!-- Read header information and set all ids. If there is a mismatch
	937	!-- between the previuos and the actual run, netcdf_extend is returned
	938	!-- as .FALSE.
	939	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	940
	941	!
	942	!-- Remove the local file, if it can not be extended
	943	IF ( .NOT. netcdf_extend ) THEN
	944	nc_stat = NF90_CLOSE( id_set_pr )
[263]	945	CALL handle_netcdf_error( 'check_open', 30 )
[102]	946	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	947	ENDIF
	948
	949	ENDIF
	950
	951	IF ( .NOT. netcdf_extend ) THEN
	952	!
[1031]	953	!-- Create a new netCDF output file with requested netCDF format
	954	CALL create_netcdf_file( filename, id_set_pr, .FALSE., 31 )
[1]	955	!
	956	!-- Define the header
	957	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
	958
	959	ENDIF
	960
	961	CASE ( 105 )
	962	!
[102]	963	!-- Set filename
	964	filename = 'DATA_1D_TS_NETCDF' // coupling_char
	965
	966	!
[1031]	967	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	968	!-- be opened for extension, if its variables match the actual run.
[102]	969	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	970
	971	IF ( netcdf_extend ) THEN
	972	!
[1031]	973	!-- Open an existing netCDF file for output
	974	CALL open_write_netcdf_file( filename, id_set_ts, .FALSE., 32 )
[1]	975	!
	976	!-- Read header information and set all ids. If there is a mismatch
	977	!-- between the previuos and the actual run, netcdf_extend is returned
	978	!-- as .FALSE.
	979	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	980
	981	!
	982	!-- Remove the local file, if it can not be extended
	983	IF ( .NOT. netcdf_extend ) THEN
	984	nc_stat = NF90_CLOSE( id_set_ts )
[263]	985	CALL handle_netcdf_error( 'check_open', 33 )
[102]	986	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	987	ENDIF
	988
	989	ENDIF
	990
	991	IF ( .NOT. netcdf_extend ) THEN
	992	!
[1031]	993	!-- Create a new netCDF output file with requested netCDF format
	994	CALL create_netcdf_file( filename, id_set_ts, .FALSE., 34 )
[1]	995	!
	996	!-- Define the header
	997	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
	998
	999	ENDIF
	1000
	1001
	1002	CASE ( 106, 116 )
	1003	!
	1004	!-- Set filename depending on unit number
	1005	IF ( file_id == 106 ) THEN
[102]	1006	filename = 'DATA_3D_NETCDF' // coupling_char
[1]	1007	av = 0
	1008	ELSE
[102]	1009	filename = 'DATA_3D_AV_NETCDF' // coupling_char
[1]	1010	av = 1
	1011	ENDIF
	1012	!
[1031]	1013	!-- Inquire, if there is a netCDF file from a previous run. This should
[1]	1014	!-- be opened for extension, if its dimensions and variables match the
	1015	!-- actual run.
	1016	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1017
	1018	IF ( netcdf_extend ) THEN
	1019	!
[1031]	1020	!-- Open an existing netCDF file for output
	1021	CALL open_write_netcdf_file( filename, id_set_3d(av), .TRUE., 35 )
[1]	1022	!
	1023	!-- Read header information and set all ids. If there is a mismatch
	1024	!-- between the previuos and the actual run, netcdf_extend is returned
	1025	!-- as .FALSE.
	1026	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1027
	1028	!
	1029	!-- Remove the local file, if it can not be extended
	1030	IF ( .NOT. netcdf_extend ) THEN
	1031	nc_stat = NF90_CLOSE( id_set_3d(av) )
[263]	1032	CALL handle_netcdf_error( 'check_open', 36 )
[1]	1033	CALL local_system('rm ' // TRIM( filename ) )
	1034	ENDIF
	1035
	1036	ENDIF
	1037
	1038	IF ( .NOT. netcdf_extend ) THEN
	1039	!
[1031]	1040	!-- Create a new netCDF output file with requested netCDF format
	1041	CALL create_netcdf_file( filename, id_set_3d(av), .TRUE., 37 )
[493]	1042
	1043	!
[1]	1044	!-- Define the header
	1045	CALL define_netcdf_header( '3d', netcdf_extend, av )
	1046
[493]	1047	!
[1031]	1048	!-- In case of parallel netCDF output, create flag file which tells
[493]	1049	!-- combine_plot_fields that nothing is to do.
[1031]	1050	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
[493]	1051	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
	1052	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
	1053	CLOSE( 99 )
	1054	ENDIF
	1055
[1]	1056	ENDIF
	1057
	1058
	1059	CASE ( 107 )
	1060	!
[102]	1061	!-- Set filename
	1062	filename = 'DATA_1D_SP_NETCDF' // coupling_char
	1063
	1064	!
[1031]	1065	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1066	!-- be opened for extension, if its variables match the actual run.
[102]	1067	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1068
	1069	IF ( netcdf_extend ) THEN
	1070	!
[1031]	1071	!-- Open an existing netCDF file for output
	1072	CALL open_write_netcdf_file( filename, id_set_sp, .FALSE., 38 )
[263]	1073
[1]	1074	!
	1075	!-- Read header information and set all ids. If there is a mismatch
	1076	!-- between the previuos and the actual run, netcdf_extend is returned
	1077	!-- as .FALSE.
	1078	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1079
	1080	!
	1081	!-- Remove the local file, if it can not be extended
	1082	IF ( .NOT. netcdf_extend ) THEN
	1083	nc_stat = NF90_CLOSE( id_set_sp )
[263]	1084	CALL handle_netcdf_error( 'check_open', 39 )
[102]	1085	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1086	ENDIF
	1087
	1088	ENDIF
	1089
	1090	IF ( .NOT. netcdf_extend ) THEN
	1091	!
[1031]	1092	!-- Create a new netCDF output file with requested netCDF format
	1093	CALL create_netcdf_file( filename, id_set_sp, .FALSE., 40 )
[1]	1094	!
	1095	!-- Define the header
	1096	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
	1097
	1098	ENDIF
	1099
	1100
	1101	CASE ( 108 )
	1102
	1103	IF ( myid_char == '' ) THEN
[102]	1104	filename = 'DATA_PRT_NETCDF' // coupling_char
[1]	1105	ELSE
[105]	1106	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
	1107	myid_char
[1]	1108	ENDIF
	1109	!
[1031]	1110	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1111	!-- be opened for extension, if its variables match the actual run.
	1112	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1113
	1114	IF ( netcdf_extend ) THEN
	1115	!
[1031]	1116	!-- Open an existing netCDF file for output
	1117	CALL open_write_netcdf_file( filename, id_set_prt, .FALSE., 41 )
[1]	1118	!
	1119	!-- Read header information and set all ids. If there is a mismatch
	1120	!-- between the previuos and the actual run, netcdf_extend is returned
	1121	!-- as .FALSE.
	1122	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1123
	1124	!
	1125	!-- Remove the local file, if it can not be extended
	1126	IF ( .NOT. netcdf_extend ) THEN
	1127	nc_stat = NF90_CLOSE( id_set_prt )
[263]	1128	CALL handle_netcdf_error( 'check_open', 42 )
[1]	1129	CALL local_system( 'rm ' // filename )
	1130	ENDIF
	1131
	1132	ENDIF
	1133
	1134	IF ( .NOT. netcdf_extend ) THEN
	1135
	1136	!
	1137	!-- For runs on multiple processors create the subdirectory
	1138	IF ( myid_char /= '' ) THEN
	1139	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
	1140	THEN ! needs modification in case of non-extendable sets
[102]	1141	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
[105]	1142	TRIM( coupling_char ) // '/' )
[1]	1143	ENDIF
[809]	1144	#if defined( __parallel ) && ! defined ( __check )
[807]	1145	!
[1]	1146	!-- Set a barrier in order to allow that all other processors in the
	1147	!-- directory created by PE0 can open their file
	1148	CALL MPI_BARRIER( comm2d, ierr )
	1149	#endif
	1150	ENDIF
	1151
	1152	!
[1031]	1153	!-- Create a new netCDF output file with requested netCDF format
	1154	CALL create_netcdf_file( filename, id_set_prt, .FALSE., 43 )
[519]	1155
	1156	!
[1]	1157	!-- Define the header
	1158	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
	1159
	1160	ENDIF
	1161
	1162	CASE ( 109 )
	1163	!
[102]	1164	!-- Set filename
	1165	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
	1166
	1167	!
[1031]	1168	!-- Inquire, if there is a netCDF file from a previuos run. This should
[1]	1169	!-- be opened for extension, if its variables match the actual run.
[102]	1170	INQUIRE( FILE=filename, EXIST=netcdf_extend )
[1]	1171
	1172	IF ( netcdf_extend ) THEN
	1173	!
[1031]	1174	!-- Open an existing netCDF file for output
	1175	CALL open_write_netcdf_file( filename, id_set_pts, .FALSE., 393 )
[1]	1176	!
	1177	!-- Read header information and set all ids. If there is a mismatch
	1178	!-- between the previuos and the actual run, netcdf_extend is returned
	1179	!-- as .FALSE.
	1180	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1181
	1182	!
	1183	!-- Remove the local file, if it can not be extended
	1184	IF ( .NOT. netcdf_extend ) THEN
	1185	nc_stat = NF90_CLOSE( id_set_pts )
[263]	1186	CALL handle_netcdf_error( 'check_open', 394 )
[102]	1187	CALL local_system( 'rm ' // TRIM( filename ) )
[1]	1188	ENDIF
	1189
	1190	ENDIF
	1191
	1192	IF ( .NOT. netcdf_extend ) THEN
	1193	!
[1031]	1194	!-- Create a new netCDF output file with requested netCDF format
	1195	CALL create_netcdf_file( filename, id_set_pts, .FALSE., 395 )
[1]	1196	!
	1197	!-- Define the header
	1198	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
	1199
	1200	ENDIF
[410]	1201
[564]	1202	CASE ( 201:200+2*max_masks )
[410]	1203	!
	1204	!-- Set filename depending on unit number
[564]	1205	IF ( file_id <= 200+max_masks ) THEN
	1206	mid = file_id - 200
[410]	1207	WRITE ( mask_char,'(I2.2)') mid
	1208	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
	1209	av = 0
	1210	ELSE
[564]	1211	mid = file_id - (200+max_masks)
[410]	1212	WRITE ( mask_char,'(I2.2)') mid
	1213	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
	1214	coupling_char
	1215	av = 1
	1216	ENDIF
	1217	!
[1031]	1218	!-- Inquire, if there is a netCDF file from a previuos run. This should
[410]	1219	!-- be opened for extension, if its dimensions and variables match the
	1220	!-- actual run.
	1221	INQUIRE( FILE=filename, EXIST=netcdf_extend )
	1222
	1223	IF ( netcdf_extend ) THEN
	1224	!
[1031]	1225	!-- Open an existing netCDF file for output
	1226	CALL open_write_netcdf_file( filename, id_set_mask(mid,av), &
	1227	.TRUE., 456 )
[410]	1228	!
	1229	!-- Read header information and set all ids. If there is a mismatch
	1230	!-- between the previuos and the actual run, netcdf_extend is returned
	1231	!-- as .FALSE.
	1232	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
[1]	1233
[410]	1234	!
	1235	!-- Remove the local file, if it can not be extended
	1236	IF ( .NOT. netcdf_extend ) THEN
	1237	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
[564]	1238	CALL handle_netcdf_error( 'check_open', 457 )
[410]	1239	CALL local_system('rm ' // TRIM( filename ) )
	1240	ENDIF
[1]	1241
[410]	1242	ENDIF
	1243
	1244	IF ( .NOT. netcdf_extend ) THEN
[1]	1245	!
[1031]	1246	!-- Create a new netCDF output file with requested netCDF format
	1247	CALL create_netcdf_file( filename, id_set_mask(mid,av), .TRUE., 458 )
[493]	1248	!
[410]	1249	!-- Define the header
	1250	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
	1251
	1252	ENDIF
	1253
	1254
	1255	#else
	1256
[564]	1257	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
[410]	1258
	1259	!
[1]	1260	!-- Nothing is done in case of missing netcdf support
	1261	RETURN
	1262
	1263	#endif
	1264
	1265	CASE DEFAULT
	1266
[247]	1267	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
[277]	1268	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
[1]	1269
	1270	END SELECT
	1271
	1272	!
	1273	!-- Set open flag
	1274	openfile(file_id)%opened = .TRUE.
	1275
	1276	!
	1277	!-- Formats
	1278	3300 FORMAT ('#'/ &
	1279	'coord 1 file=',A,' filetype=unformatted'/ &
	1280	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
	1281	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
	1282	'#')
	1283	4000 FORMAT ('# ',A)
	1284	5000 FORMAT ('# ',A/ &
	1285	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
	1286	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
	1287	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
	1288	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
	1289	8000 FORMAT (A/ &
	1290	' step time # of parts lPE sent/recv rPE sent/recv ',&
	1291	'sPE sent/recv nPE sent/recv max # of parts'/ &
	1292	103('-'))
	1293
	1294	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |