source: palm/trunk/SOURCE/check_for_restart.f90 @ 4329

Last change on this file since 4329 was 4182, checked in by scharf, 5 years ago
  • corrected "Former revisions" section
  • minor formatting in "Former revisions" section
  • added "Author" section
  • Property svn:keywords set to Id
File size: 9.6 KB
Line 
1!> @file check_for_restart.f90
2!------------------------------------------------------------------------------!
3! This file is part of the PALM model system.
4!
5! PALM is free software: you can redistribute it and/or modify it under the
6! terms of the GNU General Public License as published by the Free Software
7! Foundation, either version 3 of the License, or (at your option) any later
8! version.
9!
10! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12! A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
13!
14! You should have received a copy of the GNU General Public License along with
15! PALM. If not, see <http://www.gnu.org/licenses/>.
16!
17! Copyright 1997-2019 Leibniz Universitaet Hannover
18!------------------------------------------------------------------------------!
19!
20! Current revisions:
21! -----------------
22!
23!
24! Former revisions:
25! -----------------
26! $Id: check_for_restart.f90 4182 2019-08-22 15:20:23Z motisi $
27! Corrected "Former revisions" section
28!
29! 3655 2019-01-07 16:51:22Z knoop
30! Error messages revised
31!
32! Revision 1.1  1998/03/18 20:06:51  raasch
33! Initial revision
34!
35!
36! Description:
37! ------------
38!> Set stop flag, if restart is neccessary because of expiring cpu-time or
39!> if it is forced by user
40!------------------------------------------------------------------------------!
41 SUBROUTINE check_for_restart
42 
43
44    USE control_parameters,                                                    &
45        ONLY:  coupling_mode, dt_restart, end_time, message_string,            &
46               run_description_header, simulated_time, terminate_coupled,      &
47               terminate_coupled_remote, terminate_run,                        &
48               termination_time_needed, time_restart,                          &
49               time_since_reference_point, write_binary
50
51    USE kinds
52
53    USE pegrid
54
55    USE pmc_interface,                                                         &
56        ONLY:  comm_world_nesting, cpl_id, nested_run
57
58    IMPLICIT NONE
59
60    INTEGER ::  global_communicator       !< global communicator to be used here
61
62    LOGICAL ::  terminate_run_l           !<
63    LOGICAL ::  do_stop_now = .FALSE.     !<
64    LOGICAL ::  do_restart_now = .FALSE.  !<
65
66    REAL(wp) ::  remaining_time !<
67
68
69!
70!-- Check remaining CPU-time
71    CALL local_tremain( remaining_time )
72
73!
74!-- If necessary set a flag to stop the model run
75    terminate_run_l = .FALSE.
76    IF ( remaining_time <= termination_time_needed  .AND.  write_binary )  THEN
77
78       terminate_run_l = .TRUE.
79    ENDIF
80
81!
82!-- Set the global communicator to be used (depends on the mode in which PALM is
83!-- running)
84    IF ( nested_run )  THEN
85       global_communicator = comm_world_nesting
86    ELSE
87       global_communicator = comm2d
88    ENDIF
89
90#if defined( __parallel )
91!
92!-- Make a logical OR for all processes. Stop the model run if at least
93!-- one process has reached the time limit.
94    IF ( collective_wait )  CALL MPI_BARRIER( global_communicator, ierr )
95    CALL MPI_ALLREDUCE( terminate_run_l, terminate_run, 1, MPI_LOGICAL,     &
96                        MPI_LOR, global_communicator, ierr )
97#else
98    terminate_run = terminate_run_l
99#endif
100
101!
102!-- Output that job will be terminated
103    IF ( terminate_run  .AND.  myid == 0 )  THEN
104       WRITE( message_string, * ) 'run will be terminated because it is ',     &
105                       'running out of job cpu limit & ',                      &
106                       'remaining time:         ', remaining_time, ' s &',     &
107                       'termination time needed:', termination_time_needed, ' s'
108       CALL message( 'check_for_restart', 'PA0163', 0, 1, 0, 6, 0 )
109    ENDIF
110
111!
112!-- In case of coupled runs inform the remote model of the termination
113!-- and its reason, provided the remote model has not already been
114!-- informed of another termination reason (terminate_coupled > 0) before,
115!-- or vice versa (terminate_coupled_remote > 0).
116    IF ( terminate_run .AND. TRIM( coupling_mode ) /= 'uncoupled'  .AND.       &
117         terminate_coupled == 0  .AND.  terminate_coupled_remote == 0 )  THEN
118
119       terminate_coupled = 3
120
121#if defined( __parallel )
122       IF ( myid == 0 ) THEN
123          CALL MPI_SENDRECV( terminate_coupled,        1, MPI_INTEGER,         &
124                             target_id, 0,                                     &
125                             terminate_coupled_remote, 1, MPI_INTEGER,         &
126                             target_id, 0,                                     &
127                             comm_inter, status, ierr )
128       ENDIF
129       CALL MPI_BCAST( terminate_coupled_remote, 1, MPI_INTEGER, 0, comm2d,    &
130                       ierr )
131#endif
132    ENDIF
133
134
135!
136!-- Check if a flag file exists that forces a termination of the model
137    IF ( myid == 0 )  THEN
138       INQUIRE(FILE="DO_STOP_NOW", EXIST=do_stop_now)
139       INQUIRE(FILE="DO_RESTART_NOW", EXIST=do_restart_now)
140
141       IF ( do_stop_now .OR. do_restart_now )  THEN
142
143          terminate_run_l = .TRUE.
144
145          WRITE( message_string, * ) 'run will be terminated because user ',   &
146                                  'forced a job finalization using a flag',    &
147                                  'file:',                                     &
148                                  '&DO_STOP_NOW: ', do_stop_now,               &
149                                  '&DO_RESTART_NOW: ', do_restart_now 
150          CALL message( 'check_for_restart', 'PA0398', 0, 0, 0, 6, 0 )
151
152       ENDIF
153    ENDIF
154
155
156#if defined( __parallel )
157!
158!-- Make a logical OR for all processes. Stop the model run if a flag file has
159!-- been detected above.
160    IF ( collective_wait )  CALL MPI_BARRIER( global_communicator, ierr )
161    CALL MPI_ALLREDUCE( terminate_run_l, terminate_run, 1, MPI_LOGICAL,        &
162                        MPI_LOR, global_communicator, ierr )
163#else
164    terminate_run = terminate_run_l
165#endif
166
167!
168!-- In case of coupled runs inform the remote model of the termination
169!-- and its reason, provided the remote model has not already been
170!-- informed of another termination reason (terminate_coupled > 0) before,
171!-- or vice versa (terminate_coupled_remote > 0).
172    IF ( terminate_run .AND. coupling_mode /= 'uncoupled' .AND.                &
173         terminate_coupled == 0 .AND.  terminate_coupled_remote == 0 )  THEN
174
175       terminate_coupled = 6
176
177#if defined( __parallel )
178       IF ( myid == 0 ) THEN
179          CALL MPI_SENDRECV( terminate_coupled,        1, MPI_INTEGER,      &
180                             target_id,  0,                                 &
181                             terminate_coupled_remote, 1, MPI_INTEGER,      &
182                             target_id,  0,                                 &
183                             comm_inter, status, ierr )   
184       ENDIF
185       CALL MPI_BCAST( terminate_coupled_remote, 1, MPI_INTEGER, 0,         &
186                       comm2d, ierr ) 
187#endif
188
189    ENDIF
190
191!
192!-- Set the stop flag also, if restart is forced by user settings
193    IF ( time_restart /= 9999999.9_wp  .AND.                                   &
194         time_restart < time_since_reference_point )  THEN
195
196!
197!--    Restart is not neccessary, if the end time of the run (given by
198!--    the user) has been reached
199       IF ( simulated_time < end_time )  THEN
200          terminate_run = .TRUE.
201!
202!--       Increment restart time, if forced by user, otherwise set restart
203!--       time to default (no user restart)
204          IF ( dt_restart /= 9999999.9_wp )  THEN
205             time_restart = time_restart + dt_restart
206          ELSE
207             time_restart = 9999999.9_wp
208          ENDIF
209
210          WRITE( message_string, * ) 'run will be terminated due to user ',    &
211                                  'settings of ',                              &
212                                  'restart_time / dt_restart, ',               &
213                                  'new restart time is: ', time_restart, ' s' 
214          CALL message( 'check_for_restart', 'PA0164', 0, 0, 0, 6, 0 )
215 
216!
217!--       In case of coupled runs inform the remote model of the termination
218!--       and its reason, provided the remote model has not already been
219!--       informed of another termination reason (terminate_coupled > 0) before,
220!--       or vice versa (terminate_coupled_remote > 0).
221          IF ( coupling_mode /= 'uncoupled' .AND. terminate_coupled == 0       &
222               .AND.  terminate_coupled_remote == 0 )  THEN
223
224             IF ( dt_restart /= 9999999.9_wp )  THEN
225                terminate_coupled = 4
226             ELSE
227                terminate_coupled = 5
228             ENDIF
229#if defined( __parallel )
230             IF ( myid == 0 ) THEN
231                CALL MPI_SENDRECV( terminate_coupled,        1, MPI_INTEGER,   &
232                                   target_id,  0,                              &
233                                   terminate_coupled_remote, 1, MPI_INTEGER,   &
234                                   target_id,  0,                              &
235                                   comm_inter, status, ierr )   
236             ENDIF
237             CALL MPI_BCAST( terminate_coupled_remote, 1, MPI_INTEGER, 0,      &
238                             comm2d, ierr ) 
239#endif
240          ENDIF
241       ELSE
242          time_restart = 9999999.9_wp
243       ENDIF
244    ENDIF
245
246!
247!-- If the run is stopped, set a flag file which is necessary to initiate
248!-- the start of a continuation run, except if the user forced to stop the
249!-- run without restart
250    IF ( terminate_run  .AND.  myid == 0  .AND.  cpl_id == 1  .AND.            &
251         .NOT. do_stop_now)  THEN
252
253       OPEN ( 90, FILE='CONTINUE_RUN', FORM='FORMATTED' )
254       WRITE ( 90, '(A)' )  TRIM( run_description_header )
255       CLOSE ( 90 )
256
257    ENDIF
258
259
260 END SUBROUTINE check_for_restart
Note: See TracBrowser for help on using the repository browser.