source: palm/trunk/SOURCE/advec_w_ups.f90 @ 1

 SUBROUTINE advec_w_ups

!------------------------------------------------------------------------------!
! Actual revisions:
! -----------------
! 
!
! Former revisions:
! -----------------
! $Log: advec_w_ups.f90,v $
! Revision 1.6  2004/04/30 08:05:05  raasch
! Enlarged transposition arrays introduced
!
! Revision 1.5  2003/03/16 09:26:46  raasch
! Two underscores (_) are placed in front of all define-strings
!
! Revision 1.4  2001/03/29 17:37:53  raasch
! v_ad is now allocated locally, several temporary arrays removed from
! argument lists of spline_* and long_filter_*
! Translation of remaining German identifiers (variables, subroutines, etc.)
!
! Revision 1.3  2001/01/22 05:23:31  raasch
! Module test_variables removed
!
! Revision 1.2  2000/01/20 09:57:15  letzel
! All comments translated into English
!
! Revision 1.1  1999/02/05 08:52:09  raasch
! Initial revision
!
!
! Description:
! ------------
! Upstream-Spline advection of the w velocity-component. The advection process
! is divided into three subsequent steps, one for each of the dimensions. The
! result is stored as a tendency in array tend. The computation of the cubic
! splines and the possible execution of the Long-filter require that all grid
! points of the relevant dimension are available. For model runs on more than
! one PE therefore both the advected and the advecting quantities are
! transposed accordingly.
!
! Internally used arrays:
! v_ad = scalar quantity to be advected, initialised = w at the beginning, also
!        being used as temporary storage after each time step
! d    = advecting component (u, v, or w)
!------------------------------------------------------------------------------!

    USE advection
    USE arrays_3d
    USE cpulog
    USE grid_variables
    USE indices
    USE interfaces
    USE control_parameters

    IMPLICIT NONE

    INTEGER ::  i,j,k
    REAL, DIMENSION(:,:,:), ALLOCATABLE ::  v_ad


    CALL cpu_log( log_point_s(19), 'advec_w_ups', 'start' )

#if defined( __parallel )

!
!-- Advection of w in x-direction:
!-- Store w in temporary array v_ad (component to be advected, boundaries
!-- are not used because they disturb the transposition)
    ALLOCATE( v_ad(nzb+1:nzta,nys:nyna,nxl:nxra) )
    v_ad = 0.0
    v_ad(nzb+1:nzt,nys:nyn,nxl:nxr) = w(nzb+1:nzt,nys:nyn,nxl:nxr)

!
!-- Enlarge the size of tend, used as a working array for the transpositions
    IF ( nxra > nxr  .OR.  nyna > nyn  .OR.  nza > nz )  THEN
       DEALLOCATE( tend )
       ALLOCATE( tend(1:nza,nys:nyna,nxl:nxra) )
    ENDIF

!
!-- Transpose the component to be advected: z --> x
    CALL transpose_zx( v_ad, tend, v_ad, tend, v_ad )

#else

!
!-- Advection of w in x-direction:
!-- Store w in temporary array v_ad (component to be advected)
    ALLOCATE( v_ad(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
    v_ad(:,:,:) = w(:,:,:)

#endif

!
!-- Advecting component (u) must be averaged out on the w grid
    d = 0.0
    DO  i = nxl, nxr
       DO  j = nys, nyn
          DO  k = nzb+1, nzt
             d(k,j,i) = 0.25 * ( u(k,j,i) + u(k,j,i+1) +   &
                                 u(k+1,j,i+1) + u(k+1,j,i) ) - u_gtrans
          ENDDO
       ENDDO
    ENDDO
    
#if defined( __parallel )

!
!-- Transpose the component to be advected: z --> x
    CALL transpose_zx( d, tend, d, tend, d )

#endif

!
!-- Upstream-Spline advection of w in x-direction. Array tend comes out
!-- as v_ad before the advection step including cyclic boundaries.
!-- It is needed for the long filter.
    CALL spline_x( v_ad, d, 'w' )

!
!-- Advection of w in y-direction:
!-- advecting component (v) must be averaged out on the w grid
    DO  i = nxl, nxr
       DO  j = nys, nyn
          DO  k = nzb+1, nzt
             d(k,j,i) = 0.25 * ( v(k,j,i) + v(k,j+1,i) +   &
                                 v(k+1,j+1,i) + v(k+1,j,i) ) - v_gtrans
          ENDDO
       ENDDO
    ENDDO

#if defined( __parallel )

!
!-- Transpose the advecting component: z --> y
    CALL transpose_zx( d, tend, d, tend, d )
    CALL transpose_xy( d, tend, d, tend, d )

!
!-- Transpose the component to be advected: x --> y
    CALL transpose_xy( v_ad, tend, v_ad, tend, v_ad )

#endif

!
!-- Upstream-Spline advection of w in y-direction
    CALL spline_y( v_ad, d, 'w' )

!
!-- Advection of w in z-direction:
!-- advecting component (d) = component to be advected (v_ad)
    d(nzb+1:nzt,nys:nyn,nxl:nxr) = w(nzb+1:nzt,nys:nyn,nxl:nxr)

#if defined( __parallel )

!
!-- Transpose the component to be advected: y --> z (= y --> x + x --> z)
    CALL transpose_yx( v_ad, tend, v_ad, tend, v_ad )
    CALL transpose_xz( v_ad, tend, v_ad, tend, v_ad )

!
!-- Resize tend to its normal size
    IF ( nxra > nxr  .OR.  nyna > nyn  .OR.  nza > nz )  THEN
       DEALLOCATE( tend )
       ALLOCATE( tend(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
    ENDIF

#endif

!
!-- Upstream-Spline advection of w in z-direction
    CALL spline_z( v_ad, d, dzw, spl_tri_zw, 'w' )

!
!-- Compute the tendency term
    DO  i = nxl, nxr
       DO  j = nys, nyn
          DO  k = nzb+1, nzt
             tend(k,j,i) = ( v_ad(k,j,i) - w(k,j,i) ) / dt_3d
          ENDDO
       ENDDO
    ENDDO

    DEALLOCATE( v_ad )

    CALL cpu_log( log_point_s(19), 'advec_w_ups', 'stop' )

 END SUBROUTINE advec_w_ups