source: palm/trunk/SOURCE/advec_s_up.f90 @ 4554

!> @file advec_s_up.f90
!--------------------------------------------------------------------------------------------------!
! This file is part of the PALM model system.
!
! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General
! Public License as published by the Free Software Foundation, either version 3 of the License, or
! (at your option) any later version.
!
! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
! Public License for more details.
!
! You should have received a copy of the GNU General Public License along with PALM. If not, see
! <http://www.gnu.org/licenses/>.
!
! Copyright 1997-2020 Leibniz Universitaet Hannover
!--------------------------------------------------------------------------------------------------!
!
! Current revisions:
! -----------------
! 
! 
! Former revisions:
! -----------------
! $Id: advec_s_up.f90 4488 2020-04-03 11:34:29Z eckhard $
! file re-formatted to follow the PALM coding standard
!
! 4360 2020-01-07 11:25:50Z suehring
! Corrected "Former revisions" section
!
! 3927 2019-04-23 13:24:29Z raasch
! pointer attribute removed from scalar 3d-array for performance reasons
!
! 3665 2019-01-10 08:28:24Z raasch
! unused variables removed
!
! 3655 2019-01-07 16:51:22Z knoop
! nopointer option removed
!
! Revision 1.1  1997/08/29 08:54:33  raasch
! Initial revision
!
!
! Description:
! ------------
!> Advection term for scalar quantities using the Upstream scheme.
!> NOTE: vertical advection at k=1 still has wrong grid spacing for w>0!
!>       The same problem occurs for all topography boundaries!
!--------------------------------------------------------------------------------------------------!
 MODULE advec_s_up_mod


    PRIVATE
    PUBLIC advec_s_up

    INTERFACE advec_s_up
       MODULE PROCEDURE advec_s_up
       MODULE PROCEDURE advec_s_up_ij
    END INTERFACE advec_s_up

 CONTAINS


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Call for all grid points
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE advec_s_up( sk )

    USE arrays_3d,                                                                                 &
        ONLY:  ddzu, tend, u, v, w

    USE control_parameters,                                                                        &
        ONLY:  u_gtrans, v_gtrans

    USE grid_variables,                                                                            &
        ONLY:  ddx, ddy

    USE indices,                                                                                   &
        ONLY:  nxl, nxlg, nxr, nxrg, nyn, nyng, nys, nysg, nzb, nzt

    USE kinds


    IMPLICIT NONE

    INTEGER(iwp) ::  i !< grid index along x-direction
    INTEGER(iwp) ::  j !< grid index along y-direction
    INTEGER(iwp) ::  k !< grid index along z-direction

    REAL(wp) ::  ukomp !< advection velocity along x-direction
    REAL(wp) ::  vkomp !< advection velocity along y-direction
    REAL(wp) ::  wkomp !< advection velocity along z-direction

    REAL(wp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ::  sk !< treated scalar


    DO  i = nxl, nxr
       DO  j = nys, nyn
          DO  k = nzb+1, nzt
!
!--          x-direction
             ukomp = 0.5_wp * ( u(k,j,i) + u(k,j,i+1) ) - u_gtrans
             IF ( ukomp > 0.0_wp )  THEN
                tend(k,j,i) = tend(k,j,i) - ukomp * ( sk(k,j,i) - sk(k,j,i-1) ) * ddx
             ELSE
                tend(k,j,i) = tend(k,j,i) - ukomp * ( sk(k,j,i+1) - sk(k,j,i) ) * ddx
             ENDIF
!
!--          y-direction
             vkomp = 0.5_wp * ( v(k,j,i) + v(k,j+1,i) ) - v_gtrans
             IF ( vkomp > 0.0_wp )  THEN
                tend(k,j,i) = tend(k,j,i) - vkomp * ( sk(k,j,i) - sk(k,j-1,i) ) * ddy
             ELSE
                tend(k,j,i) = tend(k,j,i) - vkomp * ( sk(k,j+1,i) - sk(k,j,i) ) * ddy
             ENDIF
!
!--          z-direction
             wkomp = 0.5_wp * ( w(k,j,i) + w(k-1,j,i) )
             IF ( wkomp > 0.0_wp )  THEN
                tend(k,j,i) = tend(k,j,i) - wkomp * ( sk(k,j,i) - sk(k-1,j,i) ) * ddzu(k)
             ELSE
                tend(k,j,i) = tend(k,j,i) - wkomp * ( sk(k+1,j,i) - sk(k,j,i) ) * ddzu(k+1)
             ENDIF

          ENDDO
       ENDDO
    ENDDO

 END SUBROUTINE advec_s_up


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Call for grid point i,j
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE advec_s_up_ij( i, j, sk )

    USE arrays_3d,                                                                                 &
        ONLY:  ddzu, tend, u, v, w

    USE control_parameters,                                                                        &
        ONLY:  u_gtrans, v_gtrans

    USE grid_variables,                                                                            &
        ONLY:  ddx, ddy

    USE indices,                                                                                   &
        ONLY:  nxlg, nxrg, nyng, nysg, nzb, nzt

    USE kinds


    IMPLICIT NONE

    INTEGER(iwp) ::  i !< grid index along x-direction
    INTEGER(iwp) ::  j !< grid index along y-direction
    INTEGER(iwp) ::  k !< grid index along z-direction

    REAL(wp) ::  ukomp !< advection velocity along x-direction
    REAL(wp) ::  vkomp !< advection velocity along y-direction
    REAL(wp) ::  wkomp !< advection velocity along z-direction

    REAL(wp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ::  sk !< treated scalar


    DO  k = nzb+1, nzt
!
!--    x-direction
       ukomp = 0.5_wp * ( u(k,j,i) + u(k,j,i+1) ) - u_gtrans
       IF ( ukomp > 0.0_wp )  THEN
          tend(k,j,i) = tend(k,j,i) - ukomp * ( sk(k,j,i) - sk(k,j,i-1) ) * ddx
       ELSE
          tend(k,j,i) = tend(k,j,i) - ukomp * ( sk(k,j,i+1) - sk(k,j,i) ) * ddx
       ENDIF
!
!--    y-direction
       vkomp = 0.5_wp * ( v(k,j,i) + v(k,j+1,i) ) - v_gtrans
       IF ( vkomp > 0.0_wp )  THEN
          tend(k,j,i) = tend(k,j,i) - vkomp * ( sk(k,j,i) - sk(k,j-1,i) ) * ddy
       ELSE
          tend(k,j,i) = tend(k,j,i) - vkomp * ( sk(k,j+1,i) - sk(k,j,i) ) * ddy
       ENDIF
!
!--    z-direction
       wkomp = 0.5_wp * ( w(k,j,i) + w(k-1,j,i) )
       IF ( wkomp > 0.0_wp )  THEN
          tend(k,j,i) = tend(k,j,i) - wkomp * ( sk(k,j,i) - sk(k-1,j,i) ) * ddzu(k)
       ELSE
          tend(k,j,i) = tend(k,j,i) - wkomp * ( sk(k+1,j,i) - sk(k,j,i) ) * ddzu(k+1)
       ENDIF

    ENDDO

 END SUBROUTINE advec_s_up_ij

 END MODULE advec_s_up_mod