Home

Context Navigation

source: palm/trunk/SCRIPTS/subjob @ 193

Last change on this file since 193 was 191, checked in by raasch, 16 years ago
further adjustments and bugfixes for SGI system
Property svn:keywords set to `Id`
File size: 40.9 KB

Line
1	#!/bin/ksh
2	# subjob - Plot-Shellskript Version: @(#)SUBJOB 1.0
3	# $Id: subjob 191 2008-08-27 14:34:51Z raasch $
4
5	# Prozedur zum automatischen Generieren von Batch-Jobs, die unter NQS
6	# laufen sollen und deren Ergebnis (Dayfile) zum Job-generierenden
7	# Host zurueckgeschickt werden sollen
8
9
10	# letzte Aenderung:
11	# 29/06/94 - Siggi - Beginn mit Erstellung der Originalversion
12	# 08/07/94 - Siggi - Originalversion abgeschlossen (Version 1.0)
13	# 06/02/98 - Siggi - berte validiert
14	# 27/01/01 - Siggi - ground.yonsei.ac.kr validiert, Jobs zur T3E in Korea
15	# moeglich
16	# 08/02/01 - Siggi - alle subjob-Meldungen ins englische uebersetzt
17	# 25/05/02 - Siggi - Unterstuetzung des LoadLeveler
18	# 30/05/02 - Siggi - Validierung fuer ibm-Rechner in Seoul (nobel) sowie
19	# allgemeine Anpassungen fuer ibm-Rechner
20	# 15/10/02 - Siggi - Neue Default-Jobklasse (p_normal) fuer IBM in Seoul
21	# Ruecktransfer des Jobprotokolls fuer diese
22	# Maschine abgeschaltet
23	# 31/10/02 - Siggi - berni validiert
24	# 06/11/02 - Siggi - Neue Jobklassen auf ibmb und ibmh
25	# 08/11/02 - Siggi - quanero validiert
26	# 11/12/02 - Siggi - Notification fuer Transfer-Jobs abgeschaltet
27	# 23/01/03 - Siggi - hostname nobel changed to nobela
28	# 06/02/03 - Siggi - gregale validated
29	# 12/02/03 - Siggi - orkan and maestro validated
30	# 21/02/03 - Siggi - all nobel nodes in Seoul validated
31	# 12/03/03 - Siggi - nec at DKRZ validated
32	# 13/03/03 - Siggi - new nqs resource variable Memory
33	# 07/04/03 - Siggi - processor request option -c on nech needs tasks per
34	# node
35	# 11/04/03 - Siggi - network on ibms has attribute "shared"
36	# 31/07/03 - Siggi - nqs2 on nech implemented (provisional: -h nech2)
37	# cxxl added to ibmh
38	# 29/08/03 - Siggi - changes in job queues and communication system on
39	# ibms
40	# 24/10/03 - Siggi - using alternate hanni address 130.75.4.2
41	# 30/10/03 - Siggi - nech is not supported any more
42	# 10/11/03 - Siggi - nech2 renamed to nech
43	# 20/11/03 - Siggi - submit command on nech changed from qsub.test to qsub
44	# 29/03/04 - Siggi - ground not supported any more, gfdl3 validated
45	# 31/03/04 - Siggi - new option -N for node usage
46	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
47	# due to error in ssh installation (otherwise a prompt
48	# for the password appears)
49	# 23/07/04 - Siggi - changes due to the new berni configuration
50	# (federation switch)
51	# 01/09/04 - Gerald new job-classes on hanni
52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
53	# 23/11/04 - Siggi - new job class cdata on hanni and berni
54	# 03/12/04 - Siggi - notification on ibm switched of in case of
55	# delete_dayfile = true, node usage in cdev set to
56	# shared
57	# 16/02/05 - Gerald hababai validated
58	# 29/03/05 - Micha - new job class channi on hanni
59	# 11/05/05 - Siggi - ConsumableMemory is now required as resource keyword
60	# on ibms
61	# 24/05/05 - Siggi - Default queue on ibms changed from p_normal_1.3 to
62	# p_normal
63	# 30/06/05 - Siggi - network changed for queue cdev from "us" to "ip"
64	# 12/07/05 - Siggi - in network.mpi on ibmh/ibmb "csss" changed to
65	# "sn_all", new job class cexp
66	# 08/09/05 - Siggi - IP-address of gfdl3 changed
67	# 31/10/05 - Siggi - new job class pp on hurricane, serial jobs on
68	# hurricane (with -X0)
69	# 01/11/05 - Siggi - missing queue for jobs submitted on nech (for nech)
70	# added
71	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
72	# 09/02/06 - Siggi - ibmy admitted
73	# 10/02/06 - Siggi - scp2 changed to /bin/scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 18/04/06 - Siggi - new option -O for OpenMP usage
76	# 24/05/06 - Siggi - lctit admitted, ftpjob renamed scpjob
77	# 25/07/06 - Siggi - gfdl5 (ibmy) admitted for submitting jobs
78	# 27/09/06 - Siggi - breg/hreg extended with berni/hanni
79	# 25/10/06 - Siggi - data_limit set to 1.76 GByte on hanni and berni
80	# 28/11/06 - Siggi - levanto admitted
81	# 13/02/07 - Siggi - hpmuk releated code removed
82	# 01/03/07 - Siggi - adjustments for RIAM machines gate and NEC-SX8 (n-sx)
83	# 12/04/07 - Siggi - option -f (filetransfer protocol) removed, scp only
84	# 27/07/07 - Siggi - autan admitted
85	# 03/08/07 - Marcus- lcfimm admitted
86	# 08/10/07 - Siggi - further job classes added for hanni (csoloh...)
87	# 15/10/07 - Siggi - preliminary adjustments for lctit based on Jin's
88	# suggestions
89	# 19/10/07 - Marcus- add new optional argument -g group_number
90	# 19/10/07 - Siggi - a ";" was missing in the last change done by Marcus
91	# 30/10/07 - Marcus- further adjustments for queues on lctit
92	# 15/05/08 - Siggi - adjustments for lcxt4 (Bergen Center for Computational
93	# Science)
94	# 14/07/08 - Siggi - adjustments for lcsgih
95
96
97	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
98	delete_dayfile=false
99	group_number=none
100	locat=normal
101	no_default_queue=none
102	no_submit=false
103	job_catalog="~/job_queue"
104	job_name=none
105	local_user=$LOGNAME
106	node_usage=shared
107	numprocs=1
108	punkte="..........................................................."
109	submcom=qsub
110	queue=default
111	remote_host=none
112	remote_user=""
113	verify=true
114
115	typeset -i cputime=0 memory=0 Memory=0 minuten resttime sekunden stunden
116	typeset -i inumprocs nodes=0 tasks_per_node=0 threads_per_task=1
117	typeset -L20 spalte1
118	typeset -R40 spalte2
119	typeset -L60 spalte3
120
121
122
123	# FEHLERBEHANDLUNG
124	# BEI EXIT:
125	trap 'if [[ $locat != normal ]]
126	then
127	case $locat in
128	(option) printf "\n --> available optios can be displayed"
129	printf " by typing:"
130	printf "\n \"subjob ?\" \n";;
131	(ftpcopy\|parameter\|scp\|verify) printf "\n";;
132	(*) printf "\n +++ unknown error"
133	printf "\n please inform S. Raasch!\n"
134	esac
135	[[ -f $job_to_send ]] && rm $job_to_send
136	printf "\n\n+++ SUBJOB killed \n\n"
137	fi' exit
138
139
140	# BEI TERMINAL-BREAK:
141	trap '[[ -f $job_to_send ]] && rm $job_to_send
142	printf "\n\n+++ SUBJOB killed \n\n"
143	exit
144	' 2
145
146
147
148
149	# LOKALEN HOSTNAMEN FESTSTELLEN
150	local_host=$(hostname)
151
152
153
154	# HOSTSPEZIFISCHE VARIABLEN VEREINBAREN BZW. PRUEFEN, OB LOKALER HOST
155	# UEBERHAUPT ZULAESSIG IST
156	case $local_host in
157	(atmos) local_addres=172.20.25.35; local_host=lcide;;
158	(autan) local_addres=130.75.105.57; local_host=lcmuk;;
159	(bora) local_addres=130.75.105.103; local_host=lcmuk;;
160	(breg-en0\|berni-en0) local_addres=130.73.230.10; local_host=ibmb;;
161	(breva) local_addres=130.75.105.98; local_host=lcmuk;;
162	(b01*) local_addres=130.73.232.102; local_host=lcsgih;;
163	(compute-*.local) local_addres=172.20.4.2; local_host=lcfimm;;
164	(cs*) local_addres=136.172.44.131; local_host=nech;;
165	(elephanta) local_addres=130.75.105.6; local_host=lcmuk;;
166	(fimm.bccs.uib.no) local_addres=172.20.4.2; local_host=lcfimm;;
167	(gallego) local_addres=130.75.105.10; local_host=lcmuk;;
168	(gate\|n-sx) local_addres=133.5.178.11; local_host=neck;;
169	(gfdl5) local_addres=165.132.26.58; local_host=ibmy;;
170	(gfdl3.yonsei.ac.kr) local_addres=165.132.26.56; local_host=decalpha;;
171	(gregale) local_addres=130.75.105.109; local_host=lcmuk;;
172	(hababai) local_addres=130.75.105.108; local_host=lcmuk;;
173	(hexagon.bccs.uib.no) local_addres=129.177.20.113; local_host=lcxt4;;
174	(hreg-en0\|hanni-en0) local_addres=130.75.4.10; local_host=ibmh;;
175	(h01*) local_addres=130.75.4.102; local_host=lcsgih;;
176	(irifi) local_addres=130.75.105.104; local_host=lcmuk;;
177	(levanto) local_addres=130.75.105.45; local_host=lcmuk;;
178	(maestro) local_addres=130.75.105.2; local_host=lcmuk;;
179	(nid*) local_addres=129.177.20.113; local_host=lcxt4;;
180	(nobel*) local_addres=150.183.5.101; local_host=ibms;;
181	(orkan) local_addres=130.75.105.3; local_host=lcmuk;;
182	(ostria) local_addres=130.75.105.106; local_host=lcmuk;;
183	(quanero) local_addres=130.75.105.107; local_host=lcmuk;;
184	(scirocco) local_addres=172.20.25.41; local_host=lcmuk;;
185	(service100) local_addres=130.75.4.102; local_host=lcsgih;;
186	(sun1\|sun2) local_addres=130.75.6.1; local_host=unics;;
187	(r1*) local_addres=130.75.4.102; local_host=lcsgih;;
188	(r2*) local_addres=130.73.232.102; local_host=lcsgih;;
189	(tgg*) local_addres=172.17.75.161; local_host=lctit;;
190	(vorias) local_addres=172.20.25.43; local_host=lcmuk;;
191	(*) printf "\n +++ \"$local_host\" unknown";
192	printf "\n please inform S. Raasch!";
193	locat=parameter; exit;;
194	esac
195
196
197
198	# REMOTE HOST DEFAULTMAESSIG = LOCAL HOST SETZEN
199	remote_host=$local_host
200
201
202
203
204	# PROZEDUROPTIONEN EINLESEN
205	while getopts :c:dDg:h:m:n:N:O:q:t:T:u:vX: option
206	do
207	case $option in
208	(c) job_catalog=$OPTARG;;
209	(d) delete_dayfile=true;;
210	(D) no_submit=true;;
211	(g) group_number=$OPTARG;;
212	(h) remote_host=$OPTARG;;
213	(m) memory=$OPTARG;;
214	(n) job_name=$OPTARG;;
215	(N) node_usage=$OPTARG;;
216	(O) threads_per_task=$OPTARG;;
217	(q) no_default_queue=$OPTARG;;
218	(t) cputime=$OPTARG;;
219	(T) tasks_per_node=$OPTARG;;
220	(u) remote_user=$OPTARG;;
221	(v) verify=false;;
222	(X) numprocs=$OPTARG;;
223	(\?) printf "\n +++ Option $OPTARG unknown \n";
224	locat=option; exit;;
225	esac
226	done
227
228
229	# JOBDATEINAMEN ALS NAECHSTES ARGUMENT HOLEN
230	shift OPTIND-1; file_to_send=$1
231
232
233	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
234	if [ "$1" = "?" ]
235	then
236	(printf "\n *** subjob can be called as follows:\n"
237	printf "\n subjob -c.. -d -D -h.. -m.. -q.. -t.. -u.. -v <jobfile>\n"
238	printf "\n Description of available options:\n"
239	printf "\n Option Description Default-Value"
240	printf "\n -c job-input- and output-catalog ~/job_queue"
241	printf "\n -d no job-protocol will be created ---"
242	printf "\n -D only the job-file will be created ---"
243	printf "\n -h execution host, available hosts: $remote_host"
244	printf "\n ibm, ibmb, ibmh, ibms, ibmy, lcmuk,"
245	printf "\n lctit, nech, neck, unics"
246	printf "\n -m memory demand per process in MByte ---"
247	printf "\n -n jobname <jobdatei>"
248	printf "\n -O threads per task (for OpenMP usage) 1"
249	printf "\n -q job-queue to be used default"
250	printf "\n -t allowed cpu-time in seconds ---"
251	printf "\n -T tasks per node (on parallel hosts) ---"
252	printf "\n -u username on execution host from .netrc"
253	printf "\n -v no prompt for confirmation ---"
254	printf "\n -X # of processors (on parallel hosts) 1"
255	printf "\n "
256	printf "\n The only possible positional parameter is <jobfile>:"
257	printf "\n The complete NQS-job must be provided here."
258	printf "\n <jobfile>=? creates this outline\n\n") \| more
259	exit
260	fi
261
262
263
264	# PRUEFEN, OB JOBDATEI ANGEGEBEN WURDE UND OB SIE AUCH EXISTIERT
265	if [[ "$file_to_send" = "" ]]
266	then
267	printf "\n +++ job-file missing"
268	locat=parameter; exit
269	else
270	if [[ -f $file_to_send ]]
271	then
272	true
273	else
274	printf "\n +++ job-file: "
275	printf "\n $file_to_send"
276	printf "\n does not exist"
277	locat=parameter; exit
278	fi
279	fi
280
281
282
283	# FALLS KEIN JOBNAME ANGEGEBEN WURDE, WIRD JOBNAME = JOBDATEINAME
284	# GESETZT. VORAUSSETZUNG: JOBDATEINAME BEINHALTET KEINE PFADE
285	if [[ $job_name = none ]]
286	then
287	job_name=$file_to_send
288	fi
289	if [[ $(echo $job_name \| grep -c "/") != 0 ]]
290	then
291	printf "\n +++ job-file name: "
292	printf "\n $job_name"
293	printf "\n must not contain \"/\"-characters"
294	locat=parameter; exit
295	fi
296
297
298
299
300	# HOSTSPEZIFISCHE GROESSEN VEREINBAREN BZW. ABBRUCH BEI UNZULAESSIGEM HOST
301	# ODER WENN HOST NICHT ANGEGEBEN WURDE
302	if [[ $remote_host = none ]]
303	then
304	printf "\n +++ host missing"
305	locat=option; exit
306	else
307	case $remote_host in
308	(ibm) queue=p690_standard; remote_addres=134.76.99.81; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
309	(ibmb) queue=cpar; remote_addres=130.73.230.10; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
310	(ibmh) queue=cpar; remote_addres=130.75.4.10; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
311	(ibms) queue=p_normal; remote_addres=150.183.5.101; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
312	(ibmy) queue=parallel; remote_addres=165.132.26.58; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
313	(lcfimm) remote_addres=172.20.4.2; submcom=/opt/torque/bin/qsub;;
314	(lcsgib) queue=smallq; remote_addres=130.73.232.102; submcom=/opt/torque/bin/qsub;;
315	(lcsgih) queue=smallq; remote_addres=130.75.4.102; submcom=/opt/moab/bin/msub;;
316	(lctit) queue=lctit; remote_addres=172.17.75.161; submcom=/n1ge/TITECH_GRID/tools/bin/n1ge;;
317	(lcxt4) remote_addres=129.177.20.113; submcom=/opt/torque/2.3.0/bin/qsub;;
318	(nech) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=136.172.44.147; submcom="/usr/local/bin/qsub";;
319	(neck) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=133.5.178.11; submcom="/usr/bin/nqsII/qsub";;
320	(vpp) qsubmem=m; qsubtime=t; queue=vpp; remote_addres=130.75.4.130;;
321	(unics) qsubmem=d; qsubtime=t; queue=unics; remote_addres=130.75.6.1;;
322	(*) printf "\n +++ hostname \"$remote_host\" not allowed";
323	locat=parameter; exit;;
324	esac
325	fi
326
327
328	# EVTL. PRUEFEN, OB ANGEGEBENE QUEUE ZULAESSIG IST
329	if [[ $no_default_queue != none ]]
330	then
331	error=false
332	ndq=$no_default_queue
333	case $remote_host in
334	(ibm) case $ndq in
335	(p690_express\|p690_standard\|p690_long) error=false;;
336	(*) error=true;;
337	esac;;
338	(ibmb) case $ndq in
339	(cdata\|cdev\|cexp\|c1\|cshare\|csolo\|cspec) error=false;;
340	(*) error=true;;
341	esac;;
342	(ibmh) case $ndq in
343	(cdata\|cdev\|cexp\|channi\|cxxl\|c1\|cshare\|csolo\|csoloh3h\|csoloh6h\|csoloh12h\|csoloh1d\|csoloh2d\|cspec) error=false;;
344	(*) error=true;;
345	esac;;
346	(ibms) case $ndq in
347	(express\|normal\|p_express\|p_normal\|p_normal_1.3\|p_normal_1.7\|grand) error=false;;
348	(*) error=true;;
349	esac;;
350	(ibmy) case $ndq in
351	(parallel) error=false;;
352	(*) error=true;;
353	esac;;
354	(lcsgib\|lcsgih) case $ndq in
355	(testq\|smallq\|bigq) error=false;;
356	(*) error=true;;
357	esac;;
358	(lctit) case $ndq in
359	(novice\|sla1\|sla2\|sla3\|RAM64GB\|RAM128GB) error=false;;
360	(*) error=true;;
361	esac;;
362	(t3eb) case $ndq in
363	(berte\|p50\|p100\|p392\|forfree\|p25himem) error=false;;
364	(*) error=true;;
365	esac;;
366	(t3eh) case $ndq in
367	(para_t3e\|em\|k\|l\|lm\|comp_t3e\|c\|p\|ht) error=false;;
368	(*) error=true;;
369	esac;;
370	(t3ej2\|t3ej5) case $ndq in
371	(low\|normal\|high) error=false;;
372	(*) error=true;;
373	esac;;
374	(t3es) case $ndq in
375	(batch\|serial-4\|pe4\|p48\|pe16\|pe32\|pe64\|pe128) error=false;;
376	(*) error=true;;
377	esac;;
378	(unics) case $ndq in
379	(unics\|ht) error=false;;
380	(*) error=true;;
381	esac;;
382	esac
383	if [[ $error = true ]]
384	then
385	printf "\n +++ queue \"$no_default_queue\" on host \"$remote_host\" not allowed"
386	locat=parameter; exit
387	else
388	queue=$no_default_queue
389	fi
390	fi
391
392
393
394	# KNOTENNUTZUNG IN ENTWICKLERQUEUE MUSS SHARED SEIN
395	if [[ $node_usage != shared && $queue = cdev ]]
396	then
397	node_usage=shared
398	fi
399
400
401
402	# PRUEFEN DER CPU-ZEIT, ZEIT NACH STUNDEN, MINUTEN UND SEKUNDEN
403	# AUFTEILEN
404	done=false
405	while [[ $done = false ]]
406	do
407	if (( $cputime <= 0 ))
408	then
409	printf "\n +++ wrong cpu-time or cpu-time missing"
410	printf "\n >>> Please type cpu-time in seconds as INTEGER:"
411	printf "\n >>> "
412	read cputime 1>/dev/null 2>&1
413	else
414	done=true
415	fi
416	done
417	if [[ $remote_host = nech ]]
418	then
419	if (( tasks_per_node != 0 ))
420	then
421	(( cputime = cputime * tasks_per_node ))
422	elif [[ $numprocs != 0 ]]
423	then
424	(( cputime = cputime * numprocs ))
425	fi
426	fi
427	(( stunden = cputime / 3600 ))
428	(( resttime = cputime - stunden * 3600 ))
429	(( minuten = resttime / 60 ))
430	(( sekunden = resttime - minuten * 60 ))
431	timestring=${stunden}:${minuten}:${sekunden}
432
433
434
435	# PRUEFEN DER KERNSPEICHERANFORDERUNG
436	done=false
437	while [[ $done = false ]]
438	do
439	if (( memory <= 0 ))
440	then
441	printf "\n +++ wrong memory demand or memory demand missing"
442	printf "\n >>> Please type memory in MByte per process as INTEGER:"
443	printf "\n >>> "
444	read memory 1>/dev/null 2>&1
445	else
446	done=true
447	fi
448	done
449
450	if [[ $remote_host = nech \|\| $remote_host = neck ]]
451	then
452	if (( tasks_per_node != 0 ))
453	then
454	(( Memory = memory * tasks_per_node / 1000 ))
455	elif [[ $numprocs != 0 ]]
456	then
457	(( Memory = memory * numprocs / 1000 ))
458	else
459	(( Memory = memory / 1000 ))
460	fi
461	fi
462
463
464	# SPEICHERBERECHNUNG BEI OPENMP-NUTZUNG
465	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
466	then
467	(( memory = memory * threads_per_task ))
468	fi
469
470
471	# BERECHNUNG DER ANZAHL DER ZU VERWENDENDEN KNOTEN
472	if (( tasks_per_node != 0 ))
473	then
474	(( nodes = numprocs / ( tasks_per_node * threads_per_task ) ))
475	fi
476
477
478
479	# HEADER-AUSGABE
480	if [[ $verify = true ]]
481	then
482	printf "\n\n"
483	printf "#--------------------------------------------------------------# \n"
484	spalte1=SUBJOB;spalte2=$(date)
485	printf "\| $spalte1$spalte2 \| \n"
486	printf "\| \| \n"
487	printf "\| values of parameters/options: \| \n"
488	spalte1=local_host$punkte; spalte2=$punkte$local_host
489	printf "\| $spalte1$spalte2 \| \n"
490	spalte1=remote_host$punkte; spalte2=$punkte$remote_host
491	printf "\| $spalte1$spalte2 \| \n"
492	spalte1=queue$punkte; spalte2=$punkte$queue
493	printf "\| $spalte1$spalte2 \| \n"
494	spalte1=memory$punkte; spalte2="$punkte$memory mb"
495	printf "\| $spalte1$spalte2 \| \n"
496	spalte1=cputime$punkte; spalte2="$punkte$cputime sec"
497	printf "\| $spalte1$spalte2 \| \n"
498	spalte1=job_name$punkte; spalte2="$punkte$job_name"
499	printf "\| $spalte1$spalte2 \| \n"
500	printf "#--------------------------------------------------------------# \n\n"
501
502
503	# KONTROLLABFRAGE, OB ALLES O.K.
504	antwort="dummy"
505	while [[ $antwort != y && $antwort != Y && $antwort != n && $antwort != N ]]
506	do
507	read antwort?" >>> continue (y/n) ? "
508	done
509	if [[ $antwort = n \|\| $antwort = N ]]
510	then
511	locat=verify; exit
512	fi
513	printf "\n"
514	fi
515
516
517
518	# ZUFALLSKENNUNG GENERIEREN UND JOBNAMEN AUF ZIELRECHNER BESTIMMEN
519	kennung=$RANDOM
520	job_on_remhost=${job_name}_${kennung}_$local_host
521	job_to_send=job_to_send_$kennung
522	if [[ $delete_dayfile = false ]]
523	then
524	remote_dayfile=${local_host}_${job_name}_result_$kennung
525	local_dayfile=${remote_host}_${job_name}
526	else
527	remote_dayfile=/dev/null
528	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
529	then
530	notification='# @ notification = never'
531	fi
532	fi
533
534
535
536	# QSUB- ODER LL-KOMMANDOS BZW. SKRIPTE GENERIEREN
537	if [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs != 0 ]]
538	then
539
540	if [[ $remote_host = ibmy ]]
541	then
542	consumable_memory=""
543	else
544	consumable_memory="ConsumableMemory($memory mb)"
545	fi
546	if [[ $queue = cdev ]]
547	then
548	data_limit="# @ data_limit = 1.76gb"
549	network_to_use="# @ network.mpi = sn_all,shared,ip"
550	else
551	if [[ $remote_host = ibms ]]
552	then
553	network_to_use="# @ network.mpi = csss,shared,us"
554	elif [[ $remote_host = ibmy ]]
555	then
556	network_to_use=""
557	else
558	network_to_use="# @ network.mpi = sn_all,shared,us"
559	data_limit="# @ data_limit = 1.76gb"
560	fi
561	fi
562
563	cat > $job_to_send << %%END%%
564	#!/bin/ksh
565
566	# @ job_type = parallel
567	# @ job_name = palm
568	# @ wall_clock_limit = ${timestring},$timestring
569	# @ resources = ConsumableCpus($threads_per_task) $consumable_memory
570	# @ output = $remote_dayfile
571	# @ error = $remote_dayfile
572	# @ image_size = 50
573	# @ class = $queue
574	# @ environment = OMP_NUM_THREADS=$threads_per_task; MP_SHARED_MEMORY=yes
575	$network_to_use
576	$data_limit
577	$notification
578
579	%%END%%
580
581	if (( nodes > 0 ))
582	then
583
584	cat >> $job_to_send << %%END%%
585	# @ node = $nodes
586	# @ tasks_per_node = $tasks_per_node
587	# @ node_usage = $node_usage
588	# @ queue
589
590	%%END%%
591
592	else
593
594	if [[ $remote_host != ibmy ]]
595	then
596
597	cat >> $job_to_send << %%END%%
598	# @ blocking = unlimited
599	# @ total_tasks = $numprocs
600	# @ node_usage = $node_usage
601	# @ queue
602
603	%%END%%
604
605	else
606
607	cat >> $job_to_send << %%END%%
608	# @ node = 1
609	# @ total_tasks = $numprocs
610	# @ queue
611
612	%%END%%
613
614	fi
615
616	fi
617
618	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs = 0 ]]
619	then
620
621	cat > $job_to_send << %%END%%
622	#!/bin/ksh
623
624	# @ job_type = serial
625	# @ node_usage = $node_usage
626	# @ job_name = palm
627	# @ wall_clock_limit = ${timestring},$timestring
628	# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)
629	# @ output = $remote_dayfile
630	# @ error = $remote_dayfile
631	# @ class = $queue
632	$notification
633
634	# @ queue
635
636	%%END%%
637
638	elif [[ $remote_host = lcfimm ]]
639	then
640
641	if [[ $numprocs != 0 ]]
642	then
643	cat > $job_to_send << %%END%%
644	#!/bin/ksh
645	#PBS -N $job_name
646	#PBS -A nersc
647	#PBS -l walltime=$timestring
648	#PBS -l nodes=${nodes}:ppn=$tasks_per_node
649	#PBS -l pmem=${memory}mb
650	#PBS -m abe
651	#PBS -M igore@nersc.no
652	#PBS -o $remote_dayfile
653	#PBS -j oe
654	mpd &
655
656	%%END%%
657
658	else
659	cat > $job_to_send << %%END%%
660	#!/bin/ksh
661	#PBS -N $job_name
662	#PBS -A nersc
663	#PBS -l walltime=$timestring
664	#PBS -l ncpus=1
665	#PBS -l pmem=${memory}mb
666	#PBS -m abe
667	#PBS -M igore@nersc.no
668	#PBS -o $remote_dayfile
669	#PBS -j oe
670
671	%%END%%
672
673	fi
674
675	elif [[ $remote_host = lcsgih \|\| $remote_host = lcsgib ]]
676	then
677
678	if [[ $queue = testq ]]
679	then
680	queue_directive="#PBS -q $queue"
681	else
682	queue_directive=""
683	fi
684
685	if [[ $numprocs != 0 ]]
686	then
687	cat > $job_to_send << %%END%%
688	#!/bin/bash
689	#PBS -N $job_name
690	#PBS -l walltime=$timestring
691	#PBS -l nodes=$nodes:ppn=${tasks_per_node}
692	#PBS -l feature=$sgi_feature
693	#PBS -l naccesspolicy=$node_usage
694	#PBS -o $remote_dayfile
695	#PBS -j oe
696	$queue_directive
697
698	. /usr/share/modules/init/bash
699	# module load mvapich/mvapich-0.9.9-intel
700	module load mvapich2
701	module load netcdf
702	export LD_LIBRARY_PATH=/sw/intel/cce/10.1.015/lib:/sw/intel/fce/10.1.015/lib:/sw/dataformats/netcdf/3.6.2/lib:\$LD_LIBRARY_PATH
703	echo ld_library_path=\$LD_LIBRARY_PATH
704
705	%%END%%
706
707	else
708	cat > $job_to_send << %%END%%
709	#PBS -S /bin/bash
710	#PBS -N $job_name
711	#PBS -l walltime=$timestring
712	#PBS -l ncpus=1
713	#PBS -o $remote_dayfile
714	#PBS -e $remote_dayfile
715
716	%%END%%
717
718	fi
719
720	elif [[ $remote_host = lcxt4 ]]
721	then
722
723	if [[ $numprocs != 0 ]]
724	then
725	cat > $job_to_send << %%END%%
726	#!/bin/ksh
727	#PBS -S /bin/ksh
728	#PBS -N $job_name
729	#PBS -A nersc
730	#PBS -l walltime=$timestring
731	#PBS -l mppwidth=${numprocs}
732	#PBS -l mppnppn=${tasks_per_node}
733	#PBS -m abe
734	#PBS -M igore@nersc.no
735	#PBS -o $remote_dayfile
736	#PBS -e $remote_dayfile
737
738	%%END%%
739
740	else
741	cat > $job_to_send << %%END%%
742	#!/bin/ksh
743	#PBS -S /bin/ksh
744	#PBS -N $job_name
745	#PBS -A nersc
746	#PBS -l walltime=$timestring
747	#PBS -l ncpus=1
748	#PBS -l pmem=${memory}mb
749	#PBS -m abe
750	#PBS -M igore@nersc.no
751	#PBS -o $remote_dayfile
752	#PBS -e $remote_dayfile
753
754	%%END%%
755
756	fi
757
758	elif [[ $remote_host = nech ]]
759	then
760
761	if (( nodes > 1 ))
762	then
763	cat > $job_to_send << %%END%%
764	#!/bin/ksh
765	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
766	#PBS -l ${qsubmem}=${Memory}gb
767	#PBS -b $nodes
768	#PBS -o $remote_dayfile
769	#PBS -N palm
770	#PBS -j o
771	#PBS -T mpisx
772
773	%%END%%
774
775	elif [[ $numprocs != 0 ]]
776	then
777	cat > $job_to_send << %%END%%
778	#!/bin/ksh
779	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
780	#PBS -l ${qsubmem}=${Memory}gb
781	#PBS -o $remote_dayfile
782	#PBS -N palm
783	#PBS -j o
784
785	%%END%%
786
787	else
788	cat > $job_to_send << %%END%%
789	#!/bin/ksh
790	#PBS -l ${qsubmem}=${Memory}gb,${qsubtime}=$cputime
791	#PBS -o $remote_dayfile
792	#PBS -j o
793
794	%%END%%
795
796	fi
797
798	elif [[ $remote_host = neck ]]
799	then
800
801	if (( nodes > 1 ))
802	then
803	cat > $job_to_send << %%END%%
804	#!/bin/ksh
805	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
806	#PBS -l ${qsubmem}=${Memory}gb
807	#PBS -b $nodes
808	#PBS -o $remote_dayfile
809	#PBS -N palm
810	#PBS -j o
811	#PBS -T mpisx
812
813	%%END%%
814
815	elif [[ $numprocs != 0 ]]
816	then
817	cat > $job_to_send << %%END%%
818	#!/bin/ksh
819	#PBS -q ${queue}
820	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
821	#PBS -l ${qsubmem}=${Memory}gb
822	#PBS -o $remote_dayfile
823	#PBS -N palm
824	#PBS -j o
825	#PBS -T mpisx
826
827	%%END%%
828
829	else
830	cat > $job_to_send << %%END%%
831	#!/bin/ksh
832	#PBS -l ${qsubmem}=${Memory}gb,${qsubtime}=$cputime
833	#PBS -o $remote_dayfile
834	#PBS -j o
835
836	%%END%%
837
838	fi
839
840	elif [[ $remote_host = lctit ]]
841	then
842	cat > $job_to_send << %%END%%
843	#!/bin/bash
844	#$ -S /bin/bash
845	cd $job_catalog
846	export PATH=$PALM_BIN:\$PATH
847	echo \$PATH
848
849	%%END%%
850
851	# OPTIONEN FUER SUBMIT-KOMMANDO ZUSAMMENSTELLEN
852	# submcom="$submcom -N $job_name -sgeout $remote_dayfile -q default"
853	submcom="$submcom -g $group_number -N $job_name -rt 4320 -sgeout $remote_dayfile -q $node_usage "
854
855	else
856
857	cat > $job_to_send << %%END%%
858	# @\$-q ${queue}
859	# @\$-l${qsubtime} $timestring
860	# @\$-l${qsubmem} ${memory}mb
861	# @\$-o $remote_dayfile
862	# @\$-eo
863
864	%%END%%
865
866	fi
867
868
869	# BEI RECHNUNG AUF REMOTE-MASCHINEN RUECKTRANSFER DES DAYFILES PER TRAP
870	# BEI EXIT VERANLASSEN
871	# VEKTORRECHNER MUSS EIGENEN JOB STARTEN, DA DORT NOHUP NICHT FUNKTIONIERT
872	# AUF IBM IN SEOUL IST RUECKTRANSFER ZUR ZEIT GENERELL NICHT MOEGLICH
873	if [[ $delete_dayfile = false && $remote_host != $local_host ]]
874	then
875	echo "set +vx" >> $job_to_send
876	echo "trap '" >> $job_to_send
877	echo "set +vx" >> $job_to_send
878	if [[ $(echo $remote_host \| cut -c1-3) = ibm \|\| $(echo $remote_host \| cut -c1-5) = lcsgi \|\| $(echo $remote_host \| cut -c1-3) = nec \|\| $remote_host = lctit ]]
879	then
880	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
881	then
882	return_queue=c1
883	elif [[ $remote_host = ibms ]]
884	then
885	return_queue=p_normal
886	elif [[ $remote_host = ibmy ]]
887	then
888	return_queue=serial
889	elif [[ $remote_host = lctit ]]
890	then
891	return_queue=sla3
892	elif [[ $remote_host = neck ]]
893	then
894	return_queue=S
895	else
896	return_queue=unknown
897	fi
898
899	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
900	then
901
902	echo "echo \"#!/bin/ksh\" >> scpjob.$kennung" >> $job_to_send
903	echo "echo \"# @ job_type = serial\" >> scpjob.$kennung" >> $job_to_send
904	echo "echo \"# @ job_name = transfer\" >> scpjob.$kennung" >> $job_to_send
905	echo "echo \"# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)\" >> scpjob.$kennung" >> $job_to_send
906	echo "echo \"# @ wall_clock_limit = 00:10:00,00:10:00\" >> scpjob.$kennung " >> $job_to_send
907	echo "echo \"# @ output = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
908	echo "echo \"# @ error = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
909	echo "echo \"# @ class = $return_queue\" >> scpjob.$kennung" >> $job_to_send
910	echo "echo \"# @ image_size = 10\" >> scpjob.$kennung" >> $job_to_send
911	echo "echo \"# @ notification = never\" >> scpjob.$kennung" >> $job_to_send
912
913	echo "echo \"# @ queue\" >> scpjob.$kennung" >> $job_to_send
914	echo "echo \" \" >> scpjob.$kennung" >> $job_to_send
915
916	echo "echo \"set -x\" >> scpjob.$kennung" >> $job_to_send
917	echo "echo \"batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \\\"$job_catalog\\\" $local_dayfile\" >> scpjob.$kennung" >> $job_to_send
918	echo "echo \"exit\" >> scpjob.$kennung" >> $job_to_send
919
920	elif [[ $remote_host = nech ]]
921	then
922	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
923	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
924	echo "#PBS -l ${qsubmem}=1GB,${qsubtime}=100" >> $job_to_send
925	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
926	echo "#PBS -j o" >> $job_to_send
927	echo " " >> $job_to_send
928	echo "set -x" >> $job_to_send
929	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
930	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
931	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
932	echo "%%END%%" >> $job_to_send
933
934	elif [[ $remote_host = neck ]]
935	then
936	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
937	echo "#PBS -q $return_queue" >> $job_to_send
938	echo "#PBS -l ${qsubmem}=1GB,${qsubtime}=100" >> $job_to_send
939	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
940	echo "#PBS -j o" >> $job_to_send
941	echo " " >> $job_to_send
942	echo "set -x" >> $job_to_send
943	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
944	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
945	echo "%%END%%" >> $job_to_send
946
947	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
948	then
949	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
950	echo "#!/bin/bash" >> $job_to_send
951	echo "#PBS -N job_protocol_transfer" >> $job_to_send
952	echo "#PBS -l walltime=00:02:00" >> $job_to_send
953	echo "#PBS -l nodes=1:ppn=1" >> $job_to_send
954	echo "#PBS -l feature=xe" >> $job_to_send
955	echo "#PBS -o \$HOME/job_queue/last_job_transfer_protocol" >> $job_to_send
956	echo "#PBS -j oe" >> $job_to_send
957	echo " " >> $job_to_send
958	echo ". /usr/share/modules/init/bash" >> $job_to_send
959	echo "set -x" >> $job_to_send
960	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
961	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
962	echo "%%END%%" >> $job_to_send
963
964	elif [[ $remote_host = lctit ]]
965	then
966	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
967	echo "set -x" >> $job_to_send
968	echo "PATH=\$PATH:$job_catalog/../pub" >> $job_to_send
969	echo "cd $job_catalog" >> $job_to_send
970	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
971	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
972	echo "%%END%%" >> $job_to_send
973
974	else
975
976	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
977	echo "# @\\\$-q $return_queue" >> $job_to_send
978	echo "# @\\\$-l${qsubtime} 10" >> $job_to_send
979	echo "# @\\\$-l${qsubmem} 10mb" >> $job_to_send
980	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es ]]
981	then
982	echo "# @\$-l mpp_p=0" >> $job_to_send
983	fi
984	echo '# @\$-lF 10mb' >> $job_to_send
985	# echo '# @\$-o /dev/null' >> $job_to_send
986	echo '# @\$-o job_queue/last_job_transfer_protocol' >> $job_to_send
987	echo '# @\\\$-eo' >> $job_to_send
988	echo " " >> $job_to_send
989	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
990	then
991	echo "set +vx" >> $job_to_send
992	echo ". .profile" >> $job_to_send
993	fi
994	echo "set -x" >> $job_to_send
995	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null" >> $job_to_send
996	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
997	echo "%%END%%" >> $job_to_send
998	fi
999
1000	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
1001	then
1002	echo "llsubmit scpjob.$kennung" >> $job_to_send
1003	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
1004	then
1005	echo "chmod u+x scpjob.$kennung" >> $job_to_send
1006	echo "msub scpjob.$kennung" >> $job_to_send
1007	elif [[ $remote_host = lctit ]]
1008	then
1009	echo "chmod u+x scpjob.$kennung" >> $job_to_send
1010	echo "rm -rf ${job_catalog}/last_job_transfer_protocol" >> $job_to_send
1011	echo "n1ge -N jobtransfer -q $return_queue -sgeout ${job_catalog}/last_job_transfer_protocol scpjob.$kennung" >> $job_to_send
1012	echo "sleep 10" >> $job_to_send
1013	elif [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
1014	then
1015	echo "qsub -J n scpjob.$kennung" >> $job_to_send
1016	elif [[ $remote_host = t3es ]]
1017	then
1018	echo "qsub -J n -s /bin/ksh scpjob.$kennung" >> $job_to_send
1019	else
1020	echo "qsub scpjob.$kennung" >> $job_to_send
1021	fi
1022	echo "rm scpjob.$kennung" >> $job_to_send
1023	if [[ $remote_host = nech ]]
1024	then
1025	echo "cd -" >> $job_to_send
1026	fi
1027	else
1028	# echo "ftpcopy -d $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
1029	echo "nohup ftpcopy -d -w 15 $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null &" >> $job_to_send
1030	fi
1031	echo "set -x" >> $job_to_send
1032	echo " ' exit" >> $job_to_send
1033	echo "set -x" >> $job_to_send
1034	fi
1035
1036
1037
1038	# EIGENTLICHE JOB-DATEI AN QSUB-KOMMANDOS ANHAENGEN
1039	cat $file_to_send >> $job_to_send
1040
1041	if [[ $remote_host = ibm ]]
1042	then
1043	echo " " >> $job_to_send
1044	echo "exit" >> $job_to_send
1045	fi
1046	if [[ $remote_host = lctit ]]
1047	then
1048	echo " " >> $job_to_send
1049	echo "rm ~/job_queue/$job_on_remhost" >> $job_to_send
1050	fi
1051
1052
1053
1054	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
1055	if [[ -z $remote_user ]]
1056	then
1057	if [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es \|\| $remote_host = vpp ]]
1058	then
1059	grep $remote_addres ~/.netrc \| read dum dum dum remote_user dum dum
1060	fi
1061	fi
1062
1063
1064
1065	# JOB AUF ZIELRECHNER TRANSFERIEREN BZW. INS JOBVERZEICHNIS KOPIEREN
1066	if [[ $no_submit = false ]]
1067	then
1068	if [[ $remote_host != $local_host ]]
1069	then
1070	[[ $verify = true ]] && printf "\n >>> transfering job to \"$remote_host\"..."
1071	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]] # ssh on ibms cannot handle "~/"
1072	then
1073	job_catalog_save=$job_catalog
1074	job_catalog=job_queue
1075	elif [[ $remote_host = nech ]]
1076	then
1077	job_catalog_save=$job_catalog
1078	job_catalog=/hpf/b/${remote_user}/job_queue
1079	fi
1080	if [[ $local_host = decalpha ]]
1081	then
1082	# VERWENDUNG VON SCP AUF DECALPHA FRAGT FEHLERHAFTERWEISE
1083	# PASSWORT AB
1084	/bin/scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
1085	elif [[ $remote_host = nech ]]
1086	then
1087	# DATEIEN KOENNEN NUR UEBER DEN ARCHIVE-SERVER DES DKRZ
1088	# TRANSFERIERT WERDEN
1089	scp $job_to_send ${remote_user}@136.172.44.205:${job_catalog}/$job_on_remhost
1090	else
1091	scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
1092	fi
1093	if [[ $? = 1 ]]
1094	then
1095	locat=scp; exit
1096	fi
1097	if [[ $remote_host = ibms ]]
1098	then
1099	job_catalog=$job_catalog_save
1100	fi
1101	[[ $verify = true ]] && printf "\n >>> finished\n"
1102	else
1103	eval job_catalog=$job_catalog
1104	cp $job_to_send ${job_catalog}/$job_on_remhost
1105	fi
1106
1107
1108
1109	# NQS- BZW. LOADLEVELER-JOB STARTEN
1110	if [[ $remote_host != $local_host ]]
1111	then
1112	[[ $verify = true ]] && printf "\n >>> submitting job using \"qsub\"...\n"
1113	if [[ $remote_host != lctit ]]
1114	then
1115	ssh $remote_addres -l $remote_user "cd $job_catalog; $submcom $job_on_remhost; rm $job_on_remhost"
1116	else
1117	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1118	# MIT SSH, DESHALB AUFRUF PER PIPE
1119	# UEBERGANGSWEISE CHECK, OB N1GE ENVIRONMENT WIRKLICH VERFUEGBAR
1120	print "cd $job_catalog; chmod u+x $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
1121	echo "first try" > send_protocol
1122	while [[ $(cat send_protocol \| grep -c "Forwarding to N1GE") = 0 ]]
1123	do
1124	if [[ $(cat send_protocol \| grep -c "first try") = 1 ]]
1125	then
1126	printf "\n trying to submit job to TIT cluster..."
1127	else
1128	printf "\n +++ failed ... trying to submit again ..."
1129	fi
1130	print "cd $job_catalog; $submcom $job_on_remhost" \| ssh $remote_addres -l $remote_user > send_protocol 2>&1
1131	cat send_protocol
1132	done
1133	sleep 10
1134	print "cd $job_catalog; rm $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
1135	echo "$submcom $job_on_remhost"
1136	rm send_protocol
1137	fi
1138
1139	[[ $verify = true ]] && printf " >>> o.k.\n"
1140	else
1141	cd $job_catalog
1142	if [[ $(echo $local_host \| cut -c1-3) = ibm ]]
1143	then
1144	eval $submcom $job_on_remhost
1145	elif [[ $local_host = lcfimm \|\| $local_host = lctit \|\| $localhost = lcxt4 ]]
1146	then
1147	eval $submcom $job_on_remhost
1148	echo "$submcom $job_on_remhost"
1149	chmod u+x $job_on_remhost
1150	elif [[ $local_host = nech ]]
1151	then
1152	if [[ $queue = default ]]
1153	then
1154	eval $submcom $job_on_remhost
1155	else
1156	eval $submcom -q $queue $job_on_remhost
1157	fi
1158	else
1159	qsub $job_on_remhost
1160	fi
1161	# JOBFILE DARF AUF LCTIT NICHT GELOESCHT WERDEN!! GESCHIEHT ERST AM JOBENDE
1162	[[ $local_host != lctit ]] && rm $job_on_remhost
1163	cd - > /dev/null
1164	fi
1165	fi
1166
1167
1168
1169	# ABSCHLUSSARBEITEN
1170
1171	if [[ $no_submit = false ]]
1172	then
1173	rm $job_to_send
1174	fi
1175	[[ $verify = true ]] && printf "\n\n *** SUBJOB finished \n\n"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |