Home

Context Navigation

source: palm/trunk/SCRIPTS/subjob @ 181

Last change on this file since 181 was 181, checked in by raasch, 16 years ago
bugfixes + adjustments for SGI ICE system
Property svn:keywords set to `Id`
File size: 40.7 KB

Line
1	#!/bin/ksh
2	# subjob - Plot-Shellskript Version: @(#)SUBJOB 1.0
3	# $Id: subjob 181 2008-07-30 07:07:47Z raasch $
4
5	# Prozedur zum automatischen Generieren von Batch-Jobs, die unter NQS
6	# laufen sollen und deren Ergebnis (Dayfile) zum Job-generierenden
7	# Host zurueckgeschickt werden sollen
8
9
10	# letzte Aenderung:
11	# 29/06/94 - Siggi - Beginn mit Erstellung der Originalversion
12	# 08/07/94 - Siggi - Originalversion abgeschlossen (Version 1.0)
13	# 06/02/98 - Siggi - berte validiert
14	# 27/01/01 - Siggi - ground.yonsei.ac.kr validiert, Jobs zur T3E in Korea
15	# moeglich
16	# 08/02/01 - Siggi - alle subjob-Meldungen ins englische uebersetzt
17	# 25/05/02 - Siggi - Unterstuetzung des LoadLeveler
18	# 30/05/02 - Siggi - Validierung fuer ibm-Rechner in Seoul (nobel) sowie
19	# allgemeine Anpassungen fuer ibm-Rechner
20	# 15/10/02 - Siggi - Neue Default-Jobklasse (p_normal) fuer IBM in Seoul
21	# Ruecktransfer des Jobprotokolls fuer diese
22	# Maschine abgeschaltet
23	# 31/10/02 - Siggi - berni validiert
24	# 06/11/02 - Siggi - Neue Jobklassen auf ibmb und ibmh
25	# 08/11/02 - Siggi - quanero validiert
26	# 11/12/02 - Siggi - Notification fuer Transfer-Jobs abgeschaltet
27	# 23/01/03 - Siggi - hostname nobel changed to nobela
28	# 06/02/03 - Siggi - gregale validated
29	# 12/02/03 - Siggi - orkan and maestro validated
30	# 21/02/03 - Siggi - all nobel nodes in Seoul validated
31	# 12/03/03 - Siggi - nec at DKRZ validated
32	# 13/03/03 - Siggi - new nqs resource variable Memory
33	# 07/04/03 - Siggi - processor request option -c on nech needs tasks per
34	# node
35	# 11/04/03 - Siggi - network on ibms has attribute "shared"
36	# 31/07/03 - Siggi - nqs2 on nech implemented (provisional: -h nech2)
37	# cxxl added to ibmh
38	# 29/08/03 - Siggi - changes in job queues and communication system on
39	# ibms
40	# 24/10/03 - Siggi - using alternate hanni address 130.75.4.2
41	# 30/10/03 - Siggi - nech is not supported any more
42	# 10/11/03 - Siggi - nech2 renamed to nech
43	# 20/11/03 - Siggi - submit command on nech changed from qsub.test to qsub
44	# 29/03/04 - Siggi - ground not supported any more, gfdl3 validated
45	# 31/03/04 - Siggi - new option -N for node usage
46	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
47	# due to error in ssh installation (otherwise a prompt
48	# for the password appears)
49	# 23/07/04 - Siggi - changes due to the new berni configuration
50	# (federation switch)
51	# 01/09/04 - Gerald new job-classes on hanni
52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
53	# 23/11/04 - Siggi - new job class cdata on hanni and berni
54	# 03/12/04 - Siggi - notification on ibm switched of in case of
55	# delete_dayfile = true, node usage in cdev set to
56	# shared
57	# 16/02/05 - Gerald hababai validated
58	# 29/03/05 - Micha - new job class channi on hanni
59	# 11/05/05 - Siggi - ConsumableMemory is now required as resource keyword
60	# on ibms
61	# 24/05/05 - Siggi - Default queue on ibms changed from p_normal_1.3 to
62	# p_normal
63	# 30/06/05 - Siggi - network changed for queue cdev from "us" to "ip"
64	# 12/07/05 - Siggi - in network.mpi on ibmh/ibmb "csss" changed to
65	# "sn_all", new job class cexp
66	# 08/09/05 - Siggi - IP-address of gfdl3 changed
67	# 31/10/05 - Siggi - new job class pp on hurricane, serial jobs on
68	# hurricane (with -X0)
69	# 01/11/05 - Siggi - missing queue for jobs submitted on nech (for nech)
70	# added
71	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
72	# 09/02/06 - Siggi - ibmy admitted
73	# 10/02/06 - Siggi - scp2 changed to /bin/scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 18/04/06 - Siggi - new option -O for OpenMP usage
76	# 24/05/06 - Siggi - lctit admitted, ftpjob renamed scpjob
77	# 25/07/06 - Siggi - gfdl5 (ibmy) admitted for submitting jobs
78	# 27/09/06 - Siggi - breg/hreg extended with berni/hanni
79	# 25/10/06 - Siggi - data_limit set to 1.76 GByte on hanni and berni
80	# 28/11/06 - Siggi - levanto admitted
81	# 13/02/07 - Siggi - hpmuk releated code removed
82	# 01/03/07 - Siggi - adjustments for RIAM machines gate and NEC-SX8 (n-sx)
83	# 12/04/07 - Siggi - option -f (filetransfer protocol) removed, scp only
84	# 27/07/07 - Siggi - autan admitted
85	# 03/08/07 - Marcus- lcfimm admitted
86	# 08/10/07 - Siggi - further job classes added for hanni (csoloh...)
87	# 15/10/07 - Siggi - preliminary adjustments for lctit based on Jin's
88	# suggestions
89	# 19/10/07 - Marcus- add new optional argument -g group_number
90	# 19/10/07 - Siggi - a ";" was missing in the last change done by Marcus
91	# 30/10/07 - Marcus- further adjustments for queues on lctit
92	# 15/05/08 - Siggi - adjustments for lcxt4 (Bergen Center for Computational
93	# Science)
94	# 14/07/08 - Siggi - adjustments for lcsgih
95
96
97	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
98	delete_dayfile=false
99	group_number=none
100	locat=normal
101	no_default_queue=none
102	no_submit=false
103	job_catalog="~/job_queue"
104	job_name=none
105	local_user=$LOGNAME
106	node_usage=shared
107	numprocs=1
108	punkte="..........................................................."
109	submcom=qsub
110	queue=default
111	remote_host=none
112	remote_user=""
113	verify=true
114
115	typeset -i cputime=0 memory=0 Memory=0 minuten resttime sekunden stunden
116	typeset -i inumprocs nodes=0 tasks_per_node=0 threads_per_task=1
117	typeset -L20 spalte1
118	typeset -R40 spalte2
119	typeset -L60 spalte3
120
121
122
123	# FEHLERBEHANDLUNG
124	# BEI EXIT:
125	trap 'if [[ $locat != normal ]]
126	then
127	case $locat in
128	(option) printf "\n --> available optios can be displayed"
129	printf " by typing:"
130	printf "\n \"subjob ?\" \n";;
131	(ftpcopy\|parameter\|scp\|verify) printf "\n";;
132	(*) printf "\n +++ unknown error"
133	printf "\n please inform S. Raasch!\n"
134	esac
135	[[ -f $job_to_send ]] && rm $job_to_send
136	printf "\n\n+++ SUBJOB killed \n\n"
137	fi' exit
138
139
140	# BEI TERMINAL-BREAK:
141	trap '[[ -f $job_to_send ]] && rm $job_to_send
142	printf "\n\n+++ SUBJOB killed \n\n"
143	exit
144	' 2
145
146
147
148
149	# LOKALEN HOSTNAMEN FESTSTELLEN
150	local_host=$(hostname)
151
152
153
154	# HOSTSPEZIFISCHE VARIABLEN VEREINBAREN BZW. PRUEFEN, OB LOKALER HOST
155	# UEBERHAUPT ZULAESSIG IST
156	case $local_host in
157	(atmos) local_addres=172.20.25.35; local_host=lcide;;
158	(autan) local_addres=130.75.105.57; local_host=lcmuk;;
159	(bora) local_addres=130.75.105.103; local_host=lcmuk;;
160	(breg-en0\|berni-en0) local_addres=130.73.230.10; local_host=ibmb;;
161	(breva) local_addres=130.75.105.98; local_host=lcmuk;;
162	(b01*) local_addres=130.73.232.102; local_host=lcsgih;;
163	(compute-*.local) local_addres=172.20.4.2; local_host=lcfimm;;
164	(cs*) local_addres=136.172.44.131; local_host=nech;;
165	(elephanta) local_addres=130.75.105.6; local_host=lcmuk;;
166	(fimm.bccs.uib.no) local_addres=172.20.4.2; local_host=lcfimm;;
167	(gallego) local_addres=130.75.105.10; local_host=lcmuk;;
168	(gate\|n-sx) local_addres=133.5.178.11; local_host=neck;;
169	(gfdl5) local_addres=165.132.26.58; local_host=ibmy;;
170	(gfdl3.yonsei.ac.kr) local_addres=165.132.26.56; local_host=decalpha;;
171	(gregale) local_addres=130.75.105.109; local_host=lcmuk;;
172	(hababai) local_addres=130.75.105.108; local_host=lcmuk;;
173	(hexagon.bccs.uib.no) local_addres=129.177.20.113; local_host=lcxt4;;
174	(hreg-en0\|hanni-en0) local_addres=130.75.4.10; local_host=ibmh;;
175	(h01*) local_addres=130.75.4.102; local_host=lcsgih;;
176	(irifi) local_addres=130.75.105.104; local_host=lcmuk;;
177	(levanto) local_addres=130.75.105.45; local_host=lcmuk;;
178	(maestro) local_addres=130.75.105.2; local_host=lcmuk;;
179	(nid*) local_addres=129.177.20.113; local_host=lcxt4;;
180	(nobel*) local_addres=150.183.5.101; local_host=ibms;;
181	(orkan) local_addres=130.75.105.3; local_host=lcmuk;;
182	(ostria) local_addres=130.75.105.106; local_host=lcmuk;;
183	(quanero) local_addres=130.75.105.107; local_host=lcmuk;;
184	(scirocco) local_addres=172.20.25.41; local_host=lcmuk;;
185	(service100) local_addres=130.75.4.102; local_host=lcsgih;;
186	(sun1\|sun2) local_addres=130.75.6.1; local_host=unics;;
187	(r1*) local_addres=130.75.4.102; local_host=lcsgih;;
188	(r2*) local_addres=130.73.232.102; local_host=lcsgih;;
189	(tgg*) local_addres=172.17.75.161; local_host=lctit;;
190	(vorias) local_addres=172.20.25.43; local_host=lcmuk;;
191	(*) printf "\n +++ \"$local_host\" unknown";
192	printf "\n please inform S. Raasch!";
193	locat=parameter; exit;;
194	esac
195
196
197
198	# REMOTE HOST DEFAULTMAESSIG = LOCAL HOST SETZEN
199	remote_host=$local_host
200
201
202
203
204	# PROZEDUROPTIONEN EINLESEN
205	while getopts :c:dDg:h:m:n:N:O:q:t:T:u:vX: option
206	do
207	case $option in
208	(c) job_catalog=$OPTARG;;
209	(d) delete_dayfile=true;;
210	(D) no_submit=true;;
211	(g) group_number=$OPTARG;;
212	(h) remote_host=$OPTARG;;
213	(m) memory=$OPTARG;;
214	(n) job_name=$OPTARG;;
215	(N) node_usage=$OPTARG;;
216	(O) threads_per_task=$OPTARG;;
217	(q) no_default_queue=$OPTARG;;
218	(t) cputime=$OPTARG;;
219	(T) tasks_per_node=$OPTARG;;
220	(u) remote_user=$OPTARG;;
221	(v) verify=false;;
222	(X) numprocs=$OPTARG;;
223	(\?) printf "\n +++ Option $OPTARG unknown \n";
224	locat=option; exit;;
225	esac
226	done
227
228
229	# JOBDATEINAMEN ALS NAECHSTES ARGUMENT HOLEN
230	shift OPTIND-1; file_to_send=$1
231
232
233	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
234	if [ "$1" = "?" ]
235	then
236	(printf "\n *** subjob can be called as follows:\n"
237	printf "\n subjob -c.. -d -D -h.. -m.. -q.. -t.. -u.. -v <jobfile>\n"
238	printf "\n Description of available options:\n"
239	printf "\n Option Description Default-Value"
240	printf "\n -c job-input- and output-catalog ~/job_queue"
241	printf "\n -d no job-protocol will be created ---"
242	printf "\n -D only the job-file will be created ---"
243	printf "\n -h execution host, available hosts: $remote_host"
244	printf "\n ibm, ibmb, ibmh, ibms, ibmy, lcmuk,"
245	printf "\n lctit, nech, neck, unics"
246	printf "\n -m memory demand per process in MByte ---"
247	printf "\n -n jobname <jobdatei>"
248	printf "\n -O threads per task (for OpenMP usage) 1"
249	printf "\n -q job-queue to be used default"
250	printf "\n -t allowed cpu-time in seconds ---"
251	printf "\n -T tasks per node (on parallel hosts) ---"
252	printf "\n -u username on execution host from .netrc"
253	printf "\n -v no prompt for confirmation ---"
254	printf "\n -X # of processors (on parallel hosts) 1"
255	printf "\n "
256	printf "\n The only possible positional parameter is <jobfile>:"
257	printf "\n The complete NQS-job must be provided here."
258	printf "\n <jobfile>=? creates this outline\n\n") \| more
259	exit
260	fi
261
262
263
264	# PRUEFEN, OB JOBDATEI ANGEGEBEN WURDE UND OB SIE AUCH EXISTIERT
265	if [[ "$file_to_send" = "" ]]
266	then
267	printf "\n +++ job-file missing"
268	locat=parameter; exit
269	else
270	if [[ -f $file_to_send ]]
271	then
272	true
273	else
274	printf "\n +++ job-file: "
275	printf "\n $file_to_send"
276	printf "\n does not exist"
277	locat=parameter; exit
278	fi
279	fi
280
281
282
283	# FALLS KEIN JOBNAME ANGEGEBEN WURDE, WIRD JOBNAME = JOBDATEINAME
284	# GESETZT. VORAUSSETZUNG: JOBDATEINAME BEINHALTET KEINE PFADE
285	if [[ $job_name = none ]]
286	then
287	job_name=$file_to_send
288	fi
289	if [[ $(echo $job_name \| grep -c "/") != 0 ]]
290	then
291	printf "\n +++ job-file name: "
292	printf "\n $job_name"
293	printf "\n must not contain \"/\"-characters"
294	locat=parameter; exit
295	fi
296
297
298
299
300	# HOSTSPEZIFISCHE GROESSEN VEREINBAREN BZW. ABBRUCH BEI UNZULAESSIGEM HOST
301	# ODER WENN HOST NICHT ANGEGEBEN WURDE
302	if [[ $remote_host = none ]]
303	then
304	printf "\n +++ host missing"
305	locat=option; exit
306	else
307	case $remote_host in
308	(ibm) queue=p690_standard; remote_addres=134.76.99.81; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
309	(ibmb) queue=cpar; remote_addres=130.73.230.10; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
310	(ibmh) queue=cpar; remote_addres=130.75.4.10; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
311	(ibms) queue=p_normal; remote_addres=150.183.5.101; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
312	(ibmy) queue=parallel; remote_addres=165.132.26.58; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
313	(lcfimm) remote_addres=172.20.4.2; submcom=/opt/torque/bin/qsub;;
314	(lcsgib) remote_addres=130.73.232.102; submcom=/opt/torque/bin/qsub;;
315	(lcsgih) remote_addres=130.75.4.102; submcom=/opt/torque/bin/qsub;;
316	(lctit) queue=lctit; remote_addres=172.17.75.161; submcom=/n1ge/TITECH_GRID/tools/bin/n1ge;;
317	(lcxt4) remote_addres=129.177.20.113; submcom=/opt/torque/2.3.0/bin/qsub;;
318	(nech) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=136.172.44.147; submcom="/usr/local/bin/qsub";;
319	(neck) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=133.5.178.11; submcom="/usr/bin/nqsII/qsub";;
320	(vpp) qsubmem=m; qsubtime=t; queue=vpp; remote_addres=130.75.4.130;;
321	(unics) qsubmem=d; qsubtime=t; queue=unics; remote_addres=130.75.6.1;;
322	(*) printf "\n +++ hostname \"$remote_host\" not allowed";
323	locat=parameter; exit;;
324	esac
325	fi
326
327
328	# EVTL. PRUEFEN, OB ANGEGEBENE QUEUE ZULAESSIG IST
329	if [[ $no_default_queue != none ]]
330	then
331	error=false
332	ndq=$no_default_queue
333	case $remote_host in
334	(ibm) case $ndq in
335	(p690_express\|p690_standard\|p690_long) error=false;;
336	(*) error=true;;
337	esac;;
338	(ibmb) case $ndq in
339	(cdata\|cdev\|cexp\|c1\|cshare\|csolo\|cspec) error=false;;
340	(*) error=true;;
341	esac;;
342	(ibmh) case $ndq in
343	(cdata\|cdev\|cexp\|channi\|cxxl\|c1\|cshare\|csolo\|csoloh3h\|csoloh6h\|csoloh12h\|csoloh1d\|csoloh2d\|cspec) error=false;;
344	(*) error=true;;
345	esac;;
346	(ibms) case $ndq in
347	(express\|normal\|p_express\|p_normal\|p_normal_1.3\|p_normal_1.7\|grand) error=false;;
348	(*) error=true;;
349	esac;;
350	(ibmy) case $ndq in
351	(parallel) error=false;;
352	(*) error=true;;
353	esac;;
354	(lctit) case $ndq in
355	(novice\|sla1\|sla2\|sla3\|RAM64GB\|RAM128GB) error=false;;
356	(*) error=true;;
357	esac;;
358	(t3eb) case $ndq in
359	(berte\|p50\|p100\|p392\|forfree\|p25himem) error=false;;
360	(*) error=true;;
361	esac;;
362	(t3eh) case $ndq in
363	(para_t3e\|em\|k\|l\|lm\|comp_t3e\|c\|p\|ht) error=false;;
364	(*) error=true;;
365	esac;;
366	(t3ej2\|t3ej5) case $ndq in
367	(low\|normal\|high) error=false;;
368	(*) error=true;;
369	esac;;
370	(t3es) case $ndq in
371	(batch\|serial-4\|pe4\|p48\|pe16\|pe32\|pe64\|pe128) error=false;;
372	(*) error=true;;
373	esac;;
374	(unics) case $ndq in
375	(unics\|ht) error=false;;
376	(*) error=true;;
377	esac;;
378	esac
379	if [[ $error = true ]]
380	then
381	printf "\n +++ queue \"$no_default_queue\" on host \"$remote_host\" not allowed"
382	locat=parameter; exit
383	else
384	queue=$no_default_queue
385	fi
386	fi
387
388
389
390	# KNOTENNUTZUNG IN ENTWICKLERQUEUE MUSS SHARED SEIN
391	if [[ $node_usage != shared && $queue = cdev ]]
392	then
393	node_usage=shared
394	fi
395
396
397
398	# PRUEFEN DER CPU-ZEIT, ZEIT NACH STUNDEN, MINUTEN UND SEKUNDEN
399	# AUFTEILEN
400	done=false
401	while [[ $done = false ]]
402	do
403	if (( $cputime <= 0 ))
404	then
405	printf "\n +++ wrong cpu-time or cpu-time missing"
406	printf "\n >>> Please type cpu-time in seconds as INTEGER:"
407	printf "\n >>> "
408	read cputime 1>/dev/null 2>&1
409	else
410	done=true
411	fi
412	done
413	if [[ $remote_host = nech ]]
414	then
415	if (( tasks_per_node != 0 ))
416	then
417	(( cputime = cputime * tasks_per_node ))
418	elif [[ $numprocs != 0 ]]
419	then
420	(( cputime = cputime * numprocs ))
421	fi
422	fi
423	(( stunden = cputime / 3600 ))
424	(( resttime = cputime - stunden * 3600 ))
425	(( minuten = resttime / 60 ))
426	(( sekunden = resttime - minuten * 60 ))
427	timestring=${stunden}:${minuten}:${sekunden}
428
429
430
431	# PRUEFEN DER KERNSPEICHERANFORDERUNG
432	done=false
433	while [[ $done = false ]]
434	do
435	if (( memory <= 0 ))
436	then
437	printf "\n +++ wrong memory demand or memory demand missing"
438	printf "\n >>> Please type memory in MByte per process as INTEGER:"
439	printf "\n >>> "
440	read memory 1>/dev/null 2>&1
441	else
442	done=true
443	fi
444	done
445
446	if [[ $remote_host = nech \|\| $remote_host = neck ]]
447	then
448	if (( tasks_per_node != 0 ))
449	then
450	(( Memory = memory * tasks_per_node / 1000 ))
451	elif [[ $numprocs != 0 ]]
452	then
453	(( Memory = memory * numprocs / 1000 ))
454	else
455	(( Memory = memory / 1000 ))
456	fi
457	fi
458
459
460	# SPEICHERBERECHNUNG BEI OPENMP-NUTZUNG
461	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
462	then
463	(( memory = memory * threads_per_task ))
464	fi
465
466
467	# BERECHNUNG DER ANZAHL DER ZU VERWENDENDEN KNOTEN
468	if (( tasks_per_node != 0 ))
469	then
470	(( nodes = numprocs / ( tasks_per_node * threads_per_task ) ))
471	fi
472
473
474
475	# HEADER-AUSGABE
476	if [[ $verify = true ]]
477	then
478	printf "\n\n"
479	printf "#--------------------------------------------------------------# \n"
480	spalte1=SUBJOB;spalte2=$(date)
481	printf "\| $spalte1$spalte2 \| \n"
482	printf "\| \| \n"
483	printf "\| values of parameters/options: \| \n"
484	spalte1=local_host$punkte; spalte2=$punkte$local_host
485	printf "\| $spalte1$spalte2 \| \n"
486	spalte1=remote_host$punkte; spalte2=$punkte$remote_host
487	printf "\| $spalte1$spalte2 \| \n"
488	spalte1=queue$punkte; spalte2=$punkte$queue
489	printf "\| $spalte1$spalte2 \| \n"
490	spalte1=memory$punkte; spalte2="$punkte$memory mb"
491	printf "\| $spalte1$spalte2 \| \n"
492	spalte1=cputime$punkte; spalte2="$punkte$cputime sec"
493	printf "\| $spalte1$spalte2 \| \n"
494	spalte1=job_name$punkte; spalte2="$punkte$job_name"
495	printf "\| $spalte1$spalte2 \| \n"
496	printf "#--------------------------------------------------------------# \n\n"
497
498
499	# KONTROLLABFRAGE, OB ALLES O.K.
500	antwort="dummy"
501	while [[ $antwort != y && $antwort != Y && $antwort != n && $antwort != N ]]
502	do
503	read antwort?" >>> continue (y/n) ? "
504	done
505	if [[ $antwort = n \|\| $antwort = N ]]
506	then
507	locat=verify; exit
508	fi
509	printf "\n"
510	fi
511
512
513
514	# ZUFALLSKENNUNG GENERIEREN UND JOBNAMEN AUF ZIELRECHNER BESTIMMEN
515	kennung=$RANDOM
516	job_on_remhost=${job_name}_${kennung}_$local_host
517	job_to_send=job_to_send_$kennung
518	if [[ $delete_dayfile = false ]]
519	then
520	remote_dayfile=${local_host}_${job_name}_result_$kennung
521	local_dayfile=${remote_host}_${job_name}
522	else
523	remote_dayfile=/dev/null
524	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
525	then
526	notification='# @ notification = never'
527	fi
528	fi
529
530
531
532	# QSUB- ODER LL-KOMMANDOS BZW. SKRIPTE GENERIEREN
533	if [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs != 0 ]]
534	then
535
536	if [[ $remote_host = ibmy ]]
537	then
538	consumable_memory=""
539	else
540	consumable_memory="ConsumableMemory($memory mb)"
541	fi
542	if [[ $queue = cdev ]]
543	then
544	data_limit="# @ data_limit = 1.76gb"
545	network_to_use="# @ network.mpi = sn_all,shared,ip"
546	else
547	if [[ $remote_host = ibms ]]
548	then
549	network_to_use="# @ network.mpi = csss,shared,us"
550	elif [[ $remote_host = ibmy ]]
551	then
552	network_to_use=""
553	else
554	network_to_use="# @ network.mpi = sn_all,shared,us"
555	data_limit="# @ data_limit = 1.76gb"
556	fi
557	fi
558
559	cat > $job_to_send << %%END%%
560	#!/bin/ksh
561
562	# @ job_type = parallel
563	# @ job_name = palm
564	# @ wall_clock_limit = ${timestring},$timestring
565	# @ resources = ConsumableCpus($threads_per_task) $consumable_memory
566	# @ output = $remote_dayfile
567	# @ error = $remote_dayfile
568	# @ image_size = 50
569	# @ class = $queue
570	# @ environment = OMP_NUM_THREADS=$threads_per_task; MP_SHARED_MEMORY=yes
571	$network_to_use
572	$data_limit
573	$notification
574
575	%%END%%
576
577	if (( nodes > 0 ))
578	then
579
580	cat >> $job_to_send << %%END%%
581	# @ node = $nodes
582	# @ tasks_per_node = $tasks_per_node
583	# @ node_usage = $node_usage
584	# @ queue
585
586	%%END%%
587
588	else
589
590	if [[ $remote_host != ibmy ]]
591	then
592
593	cat >> $job_to_send << %%END%%
594	# @ blocking = unlimited
595	# @ total_tasks = $numprocs
596	# @ node_usage = $node_usage
597	# @ queue
598
599	%%END%%
600
601	else
602
603	cat >> $job_to_send << %%END%%
604	# @ node = 1
605	# @ total_tasks = $numprocs
606	# @ queue
607
608	%%END%%
609
610	fi
611
612	fi
613
614	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs = 0 ]]
615	then
616
617	cat > $job_to_send << %%END%%
618	#!/bin/ksh
619
620	# @ job_type = serial
621	# @ node_usage = $node_usage
622	# @ job_name = palm
623	# @ wall_clock_limit = ${timestring},$timestring
624	# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)
625	# @ output = $remote_dayfile
626	# @ error = $remote_dayfile
627	# @ class = $queue
628	$notification
629
630	# @ queue
631
632	%%END%%
633
634	elif [[ $remote_host = lcfimm ]]
635	then
636
637	if [[ $numprocs != 0 ]]
638	then
639	cat > $job_to_send << %%END%%
640	#!/bin/ksh
641	#PBS -N $job_name
642	#PBS -A nersc
643	#PBS -l walltime=$timestring
644	#PBS -l nodes=${nodes}:ppn=$tasks_per_node
645	#PBS -l pmem=${memory}mb
646	#PBS -m abe
647	#PBS -M igore@nersc.no
648	#PBS -o $remote_dayfile
649	#PBS -j oe
650	mpd &
651
652	%%END%%
653
654	else
655	cat > $job_to_send << %%END%%
656	#!/bin/ksh
657	#PBS -N $job_name
658	#PBS -A nersc
659	#PBS -l walltime=$timestring
660	#PBS -l ncpus=1
661	#PBS -l pmem=${memory}mb
662	#PBS -m abe
663	#PBS -M igore@nersc.no
664	#PBS -o $remote_dayfile
665	#PBS -j oe
666
667	%%END%%
668
669	fi
670
671	elif [[ $remote_host = lcsgih \|\| $remote_host = lcsgib ]]
672	then
673
674	if [[ $numprocs != 0 ]]
675	then
676	cat > $job_to_send << %%END%%
677	#!/bin/bash
678	#PBS -N $job_name
679	#PBS -l walltime=$timestring
680	#PBS -l nodes=$nodes:ppn=${tasks_per_node}
681	#PBS -l feature=$sgi_feature
682	#PBS -l naccesspolicy=$node_usage
683	#PBS -o $remote_dayfile
684	#PBS -j oe
685
686	. /usr/share/modules/init/bash
687	module load mvapich/mvapich-0.9.9-intel
688	# module load mvapich2/1.2-intel
689	module load netcdf
690	export LD_LIBRARY_PATH=/sw/intel/cce/10.1.015/lib:/sw/intel/fce/10.1.015/lib:/sw/dataformats/netcdf/3.6.2/lib:\$LD_LIBRARY_PATH
691	echo ld_library_path=\$LD_LIBRARY_PATH
692
693	%%END%%
694
695	else
696	cat > $job_to_send << %%END%%
697	#PBS -S /bin/bash
698	#PBS -N $job_name
699	#PBS -l walltime=$timestring
700	#PBS -l ncpus=1
701	#PBS -o $remote_dayfile
702	#PBS -e $remote_dayfile
703
704	%%END%%
705
706	fi
707
708	elif [[ $remote_host = lcxt4 ]]
709	then
710
711	if [[ $numprocs != 0 ]]
712	then
713	cat > $job_to_send << %%END%%
714	#!/bin/ksh
715	#PBS -S /bin/ksh
716	#PBS -N $job_name
717	#PBS -A nersc
718	#PBS -l walltime=$timestring
719	#PBS -l mppwidth=${numprocs}
720	#PBS -l mppnppn=${tasks_per_node}
721	#PBS -m abe
722	#PBS -M igore@nersc.no
723	#PBS -o $remote_dayfile
724	#PBS -e $remote_dayfile
725
726	%%END%%
727
728	else
729	cat > $job_to_send << %%END%%
730	#!/bin/ksh
731	#PBS -S /bin/ksh
732	#PBS -N $job_name
733	#PBS -A nersc
734	#PBS -l walltime=$timestring
735	#PBS -l ncpus=1
736	#PBS -l pmem=${memory}mb
737	#PBS -m abe
738	#PBS -M igore@nersc.no
739	#PBS -o $remote_dayfile
740	#PBS -e $remote_dayfile
741
742	%%END%%
743
744	fi
745
746	elif [[ $remote_host = nech ]]
747	then
748
749	if (( nodes > 1 ))
750	then
751	cat > $job_to_send << %%END%%
752	#!/bin/ksh
753	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
754	#PBS -l ${qsubmem}=${Memory}gb
755	#PBS -b $nodes
756	#PBS -o $remote_dayfile
757	#PBS -N palm
758	#PBS -j o
759	#PBS -T mpisx
760
761	%%END%%
762
763	elif [[ $numprocs != 0 ]]
764	then
765	cat > $job_to_send << %%END%%
766	#!/bin/ksh
767	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
768	#PBS -l ${qsubmem}=${Memory}gb
769	#PBS -o $remote_dayfile
770	#PBS -N palm
771	#PBS -j o
772
773	%%END%%
774
775	else
776	cat > $job_to_send << %%END%%
777	#!/bin/ksh
778	#PBS -l ${qsubmem}=${Memory}gb,${qsubtime}=$cputime
779	#PBS -o $remote_dayfile
780	#PBS -j o
781
782	%%END%%
783
784	fi
785
786	elif [[ $remote_host = neck ]]
787	then
788
789	if (( nodes > 1 ))
790	then
791	cat > $job_to_send << %%END%%
792	#!/bin/ksh
793	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
794	#PBS -l ${qsubmem}=${Memory}gb
795	#PBS -b $nodes
796	#PBS -o $remote_dayfile
797	#PBS -N palm
798	#PBS -j o
799	#PBS -T mpisx
800
801	%%END%%
802
803	elif [[ $numprocs != 0 ]]
804	then
805	cat > $job_to_send << %%END%%
806	#!/bin/ksh
807	#PBS -q ${queue}
808	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
809	#PBS -l ${qsubmem}=${Memory}gb
810	#PBS -o $remote_dayfile
811	#PBS -N palm
812	#PBS -j o
813	#PBS -T mpisx
814
815	%%END%%
816
817	else
818	cat > $job_to_send << %%END%%
819	#!/bin/ksh
820	#PBS -l ${qsubmem}=${Memory}gb,${qsubtime}=$cputime
821	#PBS -o $remote_dayfile
822	#PBS -j o
823
824	%%END%%
825
826	fi
827
828	elif [[ $remote_host = lctit ]]
829	then
830	cat > $job_to_send << %%END%%
831	#!/bin/bash
832	#$ -S /bin/bash
833	cd $job_catalog
834	export PATH=$PALM_BIN:\$PATH
835	echo \$PATH
836
837	%%END%%
838
839	# OPTIONEN FUER SUBMIT-KOMMANDO ZUSAMMENSTELLEN
840	# submcom="$submcom -N $job_name -sgeout $remote_dayfile -q default"
841	submcom="$submcom -g $group_number -N $job_name -rt 4320 -sgeout $remote_dayfile -q $node_usage "
842
843	else
844
845	cat > $job_to_send << %%END%%
846	# @\$-q ${queue}
847	# @\$-l${qsubtime} $timestring
848	# @\$-l${qsubmem} ${memory}mb
849	# @\$-o $remote_dayfile
850	# @\$-eo
851
852	%%END%%
853
854	fi
855
856
857	# BEI RECHNUNG AUF REMOTE-MASCHINEN RUECKTRANSFER DES DAYFILES PER TRAP
858	# BEI EXIT VERANLASSEN
859	# VEKTORRECHNER MUSS EIGENEN JOB STARTEN, DA DORT NOHUP NICHT FUNKTIONIERT
860	# AUF IBM IN SEOUL IST RUECKTRANSFER ZUR ZEIT GENERELL NICHT MOEGLICH
861	if [[ $delete_dayfile = false && $remote_host != $local_host ]]
862	then
863	echo "set +vx" >> $job_to_send
864	echo "trap '" >> $job_to_send
865	echo "set +vx" >> $job_to_send
866	if [[ $(echo $remote_host \| cut -c1-3) = ibm \|\| $(echo $remote_host \| cut -c1-5) = lcsgi \|\| $(echo $remote_host \| cut -c1-3) = nec \|\| $remote_host = lctit ]]
867	then
868	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
869	then
870	return_queue=c1
871	elif [[ $remote_host = ibms ]]
872	then
873	return_queue=p_normal
874	elif [[ $remote_host = ibmy ]]
875	then
876	return_queue=serial
877	elif [[ $remote_host = lctit ]]
878	then
879	return_queue=sla3
880	elif [[ $remote_host = neck ]]
881	then
882	return_queue=S
883	else
884	return_queue=unknown
885	fi
886
887	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
888	then
889
890	echo "echo \"#!/bin/ksh\" >> scpjob.$kennung" >> $job_to_send
891	echo "echo \"# @ job_type = serial\" >> scpjob.$kennung" >> $job_to_send
892	echo "echo \"# @ job_name = transfer\" >> scpjob.$kennung" >> $job_to_send
893	echo "echo \"# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)\" >> scpjob.$kennung" >> $job_to_send
894	echo "echo \"# @ wall_clock_limit = 00:10:00,00:10:00\" >> scpjob.$kennung " >> $job_to_send
895	echo "echo \"# @ output = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
896	echo "echo \"# @ error = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
897	echo "echo \"# @ class = $return_queue\" >> scpjob.$kennung" >> $job_to_send
898	echo "echo \"# @ image_size = 10\" >> scpjob.$kennung" >> $job_to_send
899	echo "echo \"# @ notification = never\" >> scpjob.$kennung" >> $job_to_send
900
901	echo "echo \"# @ queue\" >> scpjob.$kennung" >> $job_to_send
902	echo "echo \" \" >> scpjob.$kennung" >> $job_to_send
903
904	echo "echo \"set -x\" >> scpjob.$kennung" >> $job_to_send
905	echo "echo \"batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \\\"$job_catalog\\\" $local_dayfile\" >> scpjob.$kennung" >> $job_to_send
906	echo "echo \"exit\" >> scpjob.$kennung" >> $job_to_send
907
908	elif [[ $remote_host = nech ]]
909	then
910	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
911	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
912	echo "#PBS -l ${qsubmem}=1GB,${qsubtime}=100" >> $job_to_send
913	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
914	echo "#PBS -j o" >> $job_to_send
915	echo " " >> $job_to_send
916	echo "set -x" >> $job_to_send
917	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
918	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
919	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
920	echo "%%END%%" >> $job_to_send
921
922	elif [[ $remote_host = neck ]]
923	then
924	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
925	echo "#PBS -q $return_queue" >> $job_to_send
926	echo "#PBS -l ${qsubmem}=1GB,${qsubtime}=100" >> $job_to_send
927	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
928	echo "#PBS -j o" >> $job_to_send
929	echo " " >> $job_to_send
930	echo "set -x" >> $job_to_send
931	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
932	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
933	echo "%%END%%" >> $job_to_send
934
935	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
936	then
937	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
938	echo "#!/bin/bash" >> $job_to_send
939	echo "#PBS -N job_protocol_transfer" >> $job_to_send
940	echo "#PBS -l walltime=00:02:00" >> $job_to_send
941	echo "#PBS -l nodes=1:ppn=1" >> $job_to_send
942	echo "#PBS -l feature=xe" >> $job_to_send
943	echo "#PBS -l naccesspolicy=shared" >> $job_to_send
944	echo "#PBS -o \$HOME/job_queue/last_job_transfer_protocol" >> $job_to_send
945	echo "#PBS -j oe" >> $job_to_send
946	echo " " >> $job_to_send
947	echo ". /usr/share/modules/init/bash" >> $job_to_send
948	echo "set -x" >> $job_to_send
949	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
950	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
951	echo "%%END%%" >> $job_to_send
952
953	elif [[ $remote_host = lctit ]]
954	then
955	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
956	echo "set -x" >> $job_to_send
957	echo "PATH=\$PATH:$job_catalog/../pub" >> $job_to_send
958	echo "cd $job_catalog" >> $job_to_send
959	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
960	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
961	echo "%%END%%" >> $job_to_send
962
963	else
964
965	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
966	echo "# @\\\$-q $return_queue" >> $job_to_send
967	echo "# @\\\$-l${qsubtime} 10" >> $job_to_send
968	echo "# @\\\$-l${qsubmem} 10mb" >> $job_to_send
969	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es ]]
970	then
971	echo "# @\$-l mpp_p=0" >> $job_to_send
972	fi
973	echo '# @\$-lF 10mb' >> $job_to_send
974	# echo '# @\$-o /dev/null' >> $job_to_send
975	echo '# @\$-o job_queue/last_job_transfer_protocol' >> $job_to_send
976	echo '# @\\\$-eo' >> $job_to_send
977	echo " " >> $job_to_send
978	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
979	then
980	echo "set +vx" >> $job_to_send
981	echo ". .profile" >> $job_to_send
982	fi
983	echo "set -x" >> $job_to_send
984	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null" >> $job_to_send
985	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
986	echo "%%END%%" >> $job_to_send
987	fi
988
989	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
990	then
991	echo "llsubmit scpjob.$kennung" >> $job_to_send
992	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
993	then
994	echo "chmod u+x scpjob.$kennung" >> $job_to_send
995	echo "msub scpjob.$kennung" >> $job_to_send
996	elif [[ $remote_host = lctit ]]
997	then
998	echo "chmod u+x scpjob.$kennung" >> $job_to_send
999	echo "rm -rf ${job_catalog}/last_job_transfer_protocol" >> $job_to_send
1000	echo "n1ge -N jobtransfer -q $return_queue -sgeout ${job_catalog}/last_job_transfer_protocol scpjob.$kennung" >> $job_to_send
1001	echo "sleep 10" >> $job_to_send
1002	elif [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
1003	then
1004	echo "qsub -J n scpjob.$kennung" >> $job_to_send
1005	elif [[ $remote_host = t3es ]]
1006	then
1007	echo "qsub -J n -s /bin/ksh scpjob.$kennung" >> $job_to_send
1008	else
1009	echo "qsub scpjob.$kennung" >> $job_to_send
1010	fi
1011	echo "rm scpjob.$kennung" >> $job_to_send
1012	if [[ $remote_host = nech ]]
1013	then
1014	echo "cd -" >> $job_to_send
1015	fi
1016	else
1017	# echo "ftpcopy -d $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
1018	echo "nohup ftpcopy -d -w 15 $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null &" >> $job_to_send
1019	fi
1020	echo "set -x" >> $job_to_send
1021	echo " ' exit" >> $job_to_send
1022	echo "set -x" >> $job_to_send
1023	fi
1024
1025
1026
1027	# EIGENTLICHE JOB-DATEI AN QSUB-KOMMANDOS ANHAENGEN
1028	cat $file_to_send >> $job_to_send
1029
1030	if [[ $remote_host = ibm ]]
1031	then
1032	echo " " >> $job_to_send
1033	echo "exit" >> $job_to_send
1034	fi
1035	if [[ $remote_host = lctit ]]
1036	then
1037	echo " " >> $job_to_send
1038	echo "rm ~/job_queue/$job_on_remhost" >> $job_to_send
1039	fi
1040
1041
1042
1043	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
1044	if [[ -z $remote_user ]]
1045	then
1046	if [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es \|\| $remote_host = vpp ]]
1047	then
1048	grep $remote_addres ~/.netrc \| read dum dum dum remote_user dum dum
1049	fi
1050	fi
1051
1052
1053
1054	# JOB AUF ZIELRECHNER TRANSFERIEREN BZW. INS JOBVERZEICHNIS KOPIEREN
1055	if [[ $no_submit = false ]]
1056	then
1057	if [[ $remote_host != $local_host ]]
1058	then
1059	[[ $verify = true ]] && printf "\n >>> transfering job to \"$remote_host\"..."
1060	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]] # ssh on ibms cannot handle "~/"
1061	then
1062	job_catalog_save=$job_catalog
1063	job_catalog=job_queue
1064	elif [[ $remote_host = nech ]]
1065	then
1066	job_catalog_save=$job_catalog
1067	job_catalog=/hpf/b/${remote_user}/job_queue
1068	fi
1069	if [[ $local_host = decalpha ]]
1070	then
1071	# VERWENDUNG VON SCP AUF DECALPHA FRAGT FEHLERHAFTERWEISE
1072	# PASSWORT AB
1073	/bin/scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
1074	elif [[ $remote_host = nech ]]
1075	then
1076	# DATEIEN KOENNEN NUR UEBER DEN ARCHIVE-SERVER DES DKRZ
1077	# TRANSFERIERT WERDEN
1078	scp $job_to_send ${remote_user}@136.172.44.205:${job_catalog}/$job_on_remhost
1079	else
1080	scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
1081	fi
1082	if [[ $? = 1 ]]
1083	then
1084	locat=scp; exit
1085	fi
1086	if [[ $remote_host = ibms ]]
1087	then
1088	job_catalog=$job_catalog_save
1089	fi
1090	[[ $verify = true ]] && printf "\n >>> finished\n"
1091	else
1092	eval job_catalog=$job_catalog
1093	cp $job_to_send ${job_catalog}/$job_on_remhost
1094	fi
1095
1096
1097
1098	# NQS- BZW. LOADLEVELER-JOB STARTEN
1099	if [[ $remote_host != $local_host ]]
1100	then
1101	[[ $verify = true ]] && printf "\n >>> submitting job using \"qsub\"...\n"
1102	if [[ $remote_host != lctit ]]
1103	then
1104	ssh $remote_addres -l $remote_user "cd $job_catalog; $submcom $job_on_remhost; rm $job_on_remhost"
1105	else
1106	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1107	# MIT SSH, DESHALB AUFRUF PER PIPE
1108	# UEBERGANGSWEISE CHECK, OB N1GE ENVIRONMENT WIRKLICH VERFUEGBAR
1109	print "cd $job_catalog; chmod u+x $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
1110	echo "first try" > send_protocol
1111	while [[ $(cat send_protocol \| grep -c "Forwarding to N1GE") = 0 ]]
1112	do
1113	if [[ $(cat send_protocol \| grep -c "first try") = 1 ]]
1114	then
1115	printf "\n trying to submit job to TIT cluster..."
1116	else
1117	printf "\n +++ failed ... trying to submit again ..."
1118	fi
1119	print "cd $job_catalog; $submcom $job_on_remhost" \| ssh $remote_addres -l $remote_user > send_protocol 2>&1
1120	cat send_protocol
1121	done
1122	sleep 10
1123	print "cd $job_catalog; rm $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
1124	echo "$submcom $job_on_remhost"
1125	rm send_protocol
1126	fi
1127
1128	[[ $verify = true ]] && printf " >>> o.k.\n"
1129	else
1130	cd $job_catalog
1131	if [[ $(echo $local_host \| cut -c1-3) = ibm ]]
1132	then
1133	eval $submcom $job_on_remhost
1134	elif [[ $local_host = lcfimm \|\| $local_host = lctit \|\| $localhost = lcxt4 ]]
1135	then
1136	eval $submcom $job_on_remhost
1137	echo "$submcom $job_on_remhost"
1138	chmod u+x $job_on_remhost
1139	elif [[ $local_host = nech ]]
1140	then
1141	if [[ $queue = default ]]
1142	then
1143	eval $submcom $job_on_remhost
1144	else
1145	eval $submcom -q $queue $job_on_remhost
1146	fi
1147	else
1148	qsub $job_on_remhost
1149	fi
1150	# JOBFILE DARF AUF LCTIT NICHT GELOESCHT WERDEN!! GESCHIEHT ERST AM JOBENDE
1151	[[ $local_host != lctit ]] && rm $job_on_remhost
1152	cd - > /dev/null
1153	fi
1154	fi
1155
1156
1157
1158	# ABSCHLUSSARBEITEN
1159
1160	if [[ $no_submit = false ]]
1161	then
1162	rm $job_to_send
1163	fi
1164	[[ $verify = true ]] && printf "\n\n *** SUBJOB finished \n\n"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |