Home

Context Navigation

source: palm/trunk/SCRIPTS/subjob @ 550

Last change on this file since 550 was 544, checked in by maronga, 14 years ago
adjustments for lcxt4
Property svn:keywords set to `Id Rev`
File size: 47.1 KB

Rev	Line
[1]	1	#!/bin/ksh
[82]	2	# subjob - Plot-Shellskript Version: @(#)SUBJOB 1.0
[169]	3	# $Id: subjob 544 2010-08-17 10:44:58Z maronga $
[1]	4
	5	# Prozedur zum automatischen Generieren von Batch-Jobs, die unter NQS
	6	# laufen sollen und deren Ergebnis (Dayfile) zum Job-generierenden
	7	# Host zurueckgeschickt werden sollen
	8
	9
	10	# letzte Aenderung:
	11	# 29/06/94 - Siggi - Beginn mit Erstellung der Originalversion
	12	# 08/07/94 - Siggi - Originalversion abgeschlossen (Version 1.0)
	13	# 06/02/98 - Siggi - berte validiert
	14	# 27/01/01 - Siggi - ground.yonsei.ac.kr validiert, Jobs zur T3E in Korea
	15	# moeglich
	16	# 08/02/01 - Siggi - alle subjob-Meldungen ins englische uebersetzt
	17	# 25/05/02 - Siggi - Unterstuetzung des LoadLeveler
	18	# 30/05/02 - Siggi - Validierung fuer ibm-Rechner in Seoul (nobel) sowie
	19	# allgemeine Anpassungen fuer ibm-Rechner
	20	# 15/10/02 - Siggi - Neue Default-Jobklasse (p_normal) fuer IBM in Seoul
	21	# Ruecktransfer des Jobprotokolls fuer diese
	22	# Maschine abgeschaltet
	23	# 31/10/02 - Siggi - berni validiert
	24	# 06/11/02 - Siggi - Neue Jobklassen auf ibmb und ibmh
	25	# 08/11/02 - Siggi - quanero validiert
	26	# 11/12/02 - Siggi - Notification fuer Transfer-Jobs abgeschaltet
	27	# 23/01/03 - Siggi - hostname nobel changed to nobela
	28	# 06/02/03 - Siggi - gregale validated
	29	# 12/02/03 - Siggi - orkan and maestro validated
	30	# 21/02/03 - Siggi - all nobel nodes in Seoul validated
	31	# 12/03/03 - Siggi - nec at DKRZ validated
	32	# 13/03/03 - Siggi - new nqs resource variable Memory
	33	# 07/04/03 - Siggi - processor request option -c on nech needs tasks per
	34	# node
	35	# 11/04/03 - Siggi - network on ibms has attribute "shared"
	36	# 31/07/03 - Siggi - nqs2 on nech implemented (provisional: -h nech2)
	37	# cxxl added to ibmh
	38	# 29/08/03 - Siggi - changes in job queues and communication system on
	39	# ibms
	40	# 24/10/03 - Siggi - using alternate hanni address 130.75.4.2
	41	# 30/10/03 - Siggi - nech is not supported any more
	42	# 10/11/03 - Siggi - nech2 renamed to nech
	43	# 20/11/03 - Siggi - submit command on nech changed from qsub.test to qsub
	44	# 29/03/04 - Siggi - ground not supported any more, gfdl3 validated
	45	# 31/03/04 - Siggi - new option -N for node usage
	46	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	47	# due to error in ssh installation (otherwise a prompt
	48	# for the password appears)
	49	# 23/07/04 - Siggi - changes due to the new berni configuration
	50	# (federation switch)
	51	# 01/09/04 - Gerald new job-classes on hanni
	52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	53	# 23/11/04 - Siggi - new job class cdata on hanni and berni
	54	# 03/12/04 - Siggi - notification on ibm switched of in case of
	55	# delete_dayfile = true, node usage in cdev set to
	56	# shared
	57	# 16/02/05 - Gerald hababai validated
	58	# 29/03/05 - Micha - new job class channi on hanni
	59	# 11/05/05 - Siggi - ConsumableMemory is now required as resource keyword
	60	# on ibms
	61	# 24/05/05 - Siggi - Default queue on ibms changed from p_normal_1.3 to
	62	# p_normal
	63	# 30/06/05 - Siggi - network changed for queue cdev from "us" to "ip"
	64	# 12/07/05 - Siggi - in network.mpi on ibmh/ibmb "csss" changed to
	65	# "sn_all", new job class cexp
	66	# 08/09/05 - Siggi - IP-address of gfdl3 changed
	67	# 31/10/05 - Siggi - new job class pp on hurricane, serial jobs on
	68	# hurricane (with -X0)
	69	# 01/11/05 - Siggi - missing queue for jobs submitted on nech (for nech)
	70	# added
	71	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	72	# 09/02/06 - Siggi - ibmy admitted
	73	# 10/02/06 - Siggi - scp2 changed to /bin/scp on decalpha
	74	# 13/04/06 - Siggi - ostria admitted
	75	# 18/04/06 - Siggi - new option -O for OpenMP usage
	76	# 24/05/06 - Siggi - lctit admitted, ftpjob renamed scpjob
	77	# 25/07/06 - Siggi - gfdl5 (ibmy) admitted for submitting jobs
	78	# 27/09/06 - Siggi - breg/hreg extended with berni/hanni
	79	# 25/10/06 - Siggi - data_limit set to 1.76 GByte on hanni and berni
	80	# 28/11/06 - Siggi - levanto admitted
[5]	81	# 13/02/07 - Siggi - hpmuk releated code removed
[35]	82	# 01/03/07 - Siggi - adjustments for RIAM machines gate and NEC-SX8 (n-sx)
[82]	83	# 12/04/07 - Siggi - option -f (filetransfer protocol) removed, scp only
[102]	84	# 27/07/07 - Siggi - autan admitted
[108]	85	# 03/08/07 - Marcus- lcfimm admitted
[113]	86	# 08/10/07 - Siggi - further job classes added for hanni (csoloh...)
[118]	87	# 15/10/07 - Siggi - preliminary adjustments for lctit based on Jin's
	88	# suggestions
[122]	89	# 19/10/07 - Marcus- add new optional argument -g group_number
[125]	90	# 19/10/07 - Siggi - a ";" was missing in the last change done by Marcus
[129]	91	# 30/10/07 - Marcus- further adjustments for queues on lctit
[164]	92	# 15/05/08 - Siggi - adjustments for lcxt4 (Bergen Center for Computational
	93	# Science)
[179]	94	# 14/07/08 - Siggi - adjustments for lcsgih
[205]	95	# 23/09/08 - Gerald- paesano admitted
[206]	96	# 02/10/08 - Siggi - PBS adjustments for lcxt4
[251]	97	# 02/03/09 - Siggi - Adjustments for new NEC-SX9 at RIAM
[292]	98	# 16/04/09 - Marcus- Adjustments for lcsgib and lcsgih
[312]	99	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[325]	100	# 18/05/09 - Siggi - Settings for serial jobs on lcsgi changed
[343]	101	# 24/06/09 - BjornM- adjustments for lcxt4 (loading modules manually)
[352]	102	# 08/07/09 - Siggi - option -e added (email notification on lcsgih/b)
[366]	103	# 20/07/09 - Siggi - On lcsgi, jobs for returning the job protocol are
	104	# now run on the data nodes (feature=data)
[367]	105	# 25/08/09 - BjornM- adapted for lck
[372]	106	# 26/08/09 - Marcus- caurus admitted; optional qos feature hiprio on lcsgi
[376]	107	# 03/09/09 - Siggi - PBS sgi feature directive only used if explicitly
	108	# set in the config file by the user
[416]	109	# 16/10/09 - Carolin-adjustments for archiving on SGI-ICE of binary files;
	110	# adding special1q
[407]	111	# 01/12/09 - BjornM- re-adjustments for lcxt4, added sno (130.75.105.113)
[416]	112	# 16/10/09 - Carolin-adding permq
[440]	113	# 01/02/10 - Siggi - adapted for lcxt5m and lckyoto (Fujitsu HX600)
[475]	114	# 03/02/10 - Siggi - bug in serial jobs removed
[492]	115	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules, email
	116	# notification)
[493]	117	# 01/03/10 - Siggi - loading of modules controlled by environment variable
	118	# module_calls
[544]	119	# 17/08/10 - BjÃ¶rnM- re-adjustments for lcxt4 (location of qsub)
[1]	120
[437]	121
[493]	122
[1]	123	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[352]	124	delete_dayfile=false
	125	email_notification=none
[122]	126	group_number=none
[1]	127	locat=normal
	128	no_default_queue=none
	129	no_submit=false
	130	job_catalog="~/job_queue"
	131	job_name=none
	132	local_user=$LOGNAME
	133	node_usage=shared
[475]	134	numprocs=0
[1]	135	punkte="..........................................................."
	136	submcom=qsub
	137	queue=default
	138	remote_host=none
	139	remote_user=""
	140	verify=true
	141
	142	typeset -i cputime=0 memory=0 Memory=0 minuten resttime sekunden stunden
	143	typeset -i inumprocs nodes=0 tasks_per_node=0 threads_per_task=1
	144	typeset -L20 spalte1
	145	typeset -R40 spalte2
	146	typeset -L60 spalte3
	147
	148
	149
	150	# FEHLERBEHANDLUNG
	151	# BEI EXIT:
	152	trap 'if [[ $locat != normal ]]
	153	then
	154	case $locat in
	155	(option) printf "\n --> available optios can be displayed"
	156	printf " by typing:"
	157	printf "\n \"subjob ?\" \n";;
	158	(ftpcopy\|parameter\|scp\|verify) printf "\n";;
	159	(*) printf "\n +++ unknown error"
	160	printf "\n please inform S. Raasch!\n"
	161	esac
	162	[[ -f $job_to_send ]] && rm $job_to_send
	163	printf "\n\n+++ SUBJOB killed \n\n"
	164	fi' exit
	165
	166
	167	# BEI TERMINAL-BREAK:
	168	trap '[[ -f $job_to_send ]] && rm $job_to_send
	169	printf "\n\n+++ SUBJOB killed \n\n"
	170	exit
	171	' 2
	172
	173
	174
	175
	176	# LOKALEN HOSTNAMEN FESTSTELLEN
	177	local_host=$(hostname)
	178
	179
	180
	181	# HOSTSPEZIFISCHE VARIABLEN VEREINBAREN BZW. PRUEFEN, OB LOKALER HOST
	182	# UEBERHAUPT ZULAESSIG IST
	183	case $local_host in
	184	(atmos) local_addres=172.20.25.35; local_host=lcide;;
[102]	185	(autan) local_addres=130.75.105.57; local_host=lcmuk;;
[5]	186	(bora) local_addres=130.75.105.103; local_host=lcmuk;;
[400]	187	(bd1) local_addres=130.73.232.64; local_host=lcsgib;;
	188	(bd2) local_addres=130.73.232.65; local_host=lcsgib;;
	189	(bd3) local_addres=130.73.232.66; local_host=lcsgib;;
	190	(bd4) local_addres=130.73.232.67; local_host=lcsgib;;
	191	(b01*\|bicegate1) local_addres=130.73.232.102; local_host=lcsgib;;
[291]	192	(bicegate2) local_addres=130.73.232.103; local_host=lcsgib;;
[1]	193	(breg-en0\|berni-en0) local_addres=130.73.230.10; local_host=ibmb;;
[12]	194	(breva) local_addres=130.75.105.98; local_host=lcmuk;;
[292]	195	(bicegate2) local_addres=130.73.232.103; local_host=lcsgib;;
[372]	196	(caurus) local_addres=130.75.105.19; local_host=lcmuk;;
[108]	197	(compute-*.local) local_addres=172.20.4.2; local_host=lcfimm;;
[1]	198	(cs*) local_addres=136.172.44.131; local_host=nech;;
[5]	199	(elephanta) local_addres=130.75.105.6; local_host=lcmuk;;
[108]	200	(fimm.bccs.uib.no) local_addres=172.20.4.2; local_host=lcfimm;;
[367]	201	(node*) local_addres=165.132.26.61 local_host=lck;;
[101]	202	(gallego) local_addres=130.75.105.10; local_host=lcmuk;;
[1]	203	(gfdl5) local_addres=165.132.26.58; local_host=ibmy;;
	204	(gfdl3.yonsei.ac.kr) local_addres=165.132.26.56; local_host=decalpha;;
[5]	205	(gregale) local_addres=130.75.105.109; local_host=lcmuk;;
	206	(hababai) local_addres=130.75.105.108; local_host=lcmuk;;
[164]	207	(hexagon.bccs.uib.no) local_addres=129.177.20.113; local_host=lcxt4;;
[400]	208	(hd1) local_addres=130.75.4.104; local_host=lcsgih;;
	209	(hd2) local_addres=130.75.4.105; local_host=lcsgih;;
	210	(hd3) local_addres=130.75.4.106; local_host=lcsgih;;
	211	(hd4) local_addres=130.75.4.107; local_host=lcsgih;;
[292]	212	(h01*\|hicegate1) local_addres=130.75.4.102; local_host=lcsgih;;
[210]	213	(hicegate2) local_addres=130.75.4.103; local_host=lcsgih;;
[440]	214	(hx*) local_addres=133.3.51.11; local_host=lckyoto;;
[312]	215	(blizzard1) local_addres=136.172.40.15; local_host=ibmh;;
[5]	216	(irifi) local_addres=130.75.105.104; local_host=lcmuk;;
[407]	217	(sno) local_addres=130.75.105.113; local_host=lcmuk;;
[5]	218	(levanto) local_addres=130.75.105.45; local_host=lcmuk;;
	219	(maestro) local_addres=130.75.105.2; local_host=lcmuk;;
[437]	220	(meteo-login*) local_addres=193.166.211.144;local_host=lcxt5m;;
[164]	221	(nid*) local_addres=129.177.20.113; local_host=lcxt4;;
[1]	222	(nobel*) local_addres=150.183.5.101; local_host=ibms;;
[5]	223	(orkan) local_addres=130.75.105.3; local_host=lcmuk;;
	224	(ostria) local_addres=130.75.105.106; local_host=lcmuk;;
[205]	225	(paesano) local_addres=130.75.105.46; local_host=lcmuk;;
[5]	226	(quanero) local_addres=130.75.105.107; local_host=lcmuk;;
[1]	227	(scirocco) local_addres=172.20.25.41; local_host=lcmuk;;
	228	(sun1\|sun2) local_addres=130.75.6.1; local_host=unics;;
[259]	229	(sx-*) local_addres=172.16.1.131; local_host=necriam;;
[181]	230	(r1*) local_addres=130.75.4.102; local_host=lcsgih;;
[196]	231	(r2*) local_addres=130.73.232.102; local_host=lcsgib;;
[1]	232	(tgg*) local_addres=172.17.75.161; local_host=lctit;;
	233	(vorias) local_addres=172.20.25.43; local_host=lcmuk;;
	234	(*) printf "\n +++ \"$local_host\" unknown";
	235	printf "\n please inform S. Raasch!";
	236	locat=parameter; exit;;
	237	esac
	238
	239
	240
	241	# REMOTE HOST DEFAULTMAESSIG = LOCAL HOST SETZEN
	242	remote_host=$local_host
	243
	244
	245
	246
	247	# PROZEDUROPTIONEN EINLESEN
[352]	248	while getopts :c:dDe:g:h:m:n:N:O:q:t:T:u:vX: option
[1]	249	do
	250	case $option in
	251	(c) job_catalog=$OPTARG;;
	252	(d) delete_dayfile=true;;
	253	(D) no_submit=true;;
[352]	254	(e) email_notification=$OPTARG;;
[125]	255	(g) group_number=$OPTARG;;
[1]	256	(h) remote_host=$OPTARG;;
	257	(m) memory=$OPTARG;;
	258	(n) job_name=$OPTARG;;
	259	(N) node_usage=$OPTARG;;
	260	(O) threads_per_task=$OPTARG;;
	261	(q) no_default_queue=$OPTARG;;
	262	(t) cputime=$OPTARG;;
	263	(T) tasks_per_node=$OPTARG;;
	264	(u) remote_user=$OPTARG;;
	265	(v) verify=false;;
	266	(X) numprocs=$OPTARG;;
	267	(\?) printf "\n +++ Option $OPTARG unknown \n";
	268	locat=option; exit;;
	269	esac
	270	done
	271
	272
	273	# JOBDATEINAMEN ALS NAECHSTES ARGUMENT HOLEN
	274	shift OPTIND-1; file_to_send=$1
	275
	276
	277	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
	278	if [ "$1" = "?" ]
	279	then
	280	(printf "\n *** subjob can be called as follows:\n"
	281	printf "\n subjob -c.. -d -D -h.. -m.. -q.. -t.. -u.. -v <jobfile>\n"
	282	printf "\n Description of available options:\n"
	283	printf "\n Option Description Default-Value"
	284	printf "\n -c job-input- and output-catalog ~/job_queue"
	285	printf "\n -d no job-protocol will be created ---"
	286	printf "\n -D only the job-file will be created ---"
	287	printf "\n -h execution host, available hosts: $remote_host"
[5]	288	printf "\n ibm, ibmb, ibmh, ibms, ibmy, lcmuk,"
[251]	289	printf "\n lctit, nech, necriam, unics"
[1]	290	printf "\n -m memory demand per process in MByte ---"
	291	printf "\n -n jobname <jobdatei>"
	292	printf "\n -O threads per task (for OpenMP usage) 1"
	293	printf "\n -q job-queue to be used default"
	294	printf "\n -t allowed cpu-time in seconds ---"
	295	printf "\n -T tasks per node (on parallel hosts) ---"
	296	printf "\n -u username on execution host from .netrc"
	297	printf "\n -v no prompt for confirmation ---"
	298	printf "\n -X # of processors (on parallel hosts) 1"
	299	printf "\n "
	300	printf "\n The only possible positional parameter is <jobfile>:"
	301	printf "\n The complete NQS-job must be provided here."
	302	printf "\n <jobfile>=? creates this outline\n\n") \| more
	303	exit
	304	fi
	305
	306
	307
	308	# PRUEFEN, OB JOBDATEI ANGEGEBEN WURDE UND OB SIE AUCH EXISTIERT
	309	if [[ "$file_to_send" = "" ]]
	310	then
	311	printf "\n +++ job-file missing"
	312	locat=parameter; exit
	313	else
	314	if [[ -f $file_to_send ]]
	315	then
	316	true
	317	else
	318	printf "\n +++ job-file: "
	319	printf "\n $file_to_send"
	320	printf "\n does not exist"
	321	locat=parameter; exit
	322	fi
	323	fi
	324
	325
	326
	327	# FALLS KEIN JOBNAME ANGEGEBEN WURDE, WIRD JOBNAME = JOBDATEINAME
	328	# GESETZT. VORAUSSETZUNG: JOBDATEINAME BEINHALTET KEINE PFADE
	329	if [[ $job_name = none ]]
	330	then
	331	job_name=$file_to_send
	332	fi
	333	if [[ $(echo $job_name \| grep -c "/") != 0 ]]
	334	then
	335	printf "\n +++ job-file name: "
	336	printf "\n $job_name"
	337	printf "\n must not contain \"/\"-characters"
	338	locat=parameter; exit
	339	fi
	340
	341
	342
	343
	344	# HOSTSPEZIFISCHE GROESSEN VEREINBAREN BZW. ABBRUCH BEI UNZULAESSIGEM HOST
	345	# ODER WENN HOST NICHT ANGEGEBEN WURDE
	346	if [[ $remote_host = none ]]
	347	then
	348	printf "\n +++ host missing"
	349	locat=option; exit
	350	else
	351	case $remote_host in
[251]	352	(ibm) queue=p690_standard; remote_addres=134.76.99.81; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
	353	(ibmb) queue=cpar; remote_addres=130.73.230.10; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
[312]	354	(ibmh) queue=no_class; remote_addres=136.172.40.15; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
[251]	355	(ibms) queue=p_normal; remote_addres=150.183.5.101; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
	356	(ibmy) queue=parallel; remote_addres=165.132.26.58; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
	357	(lcfimm) remote_addres=172.20.4.2; submcom=/opt/torque/bin/qsub;;
[440]	358	(lckyoto) remote_addres=133.3.51.11; submcom=/thin/local/bin/qsub;;
[540]	359	(lcsgib) queue=smallq; remote_addres=130.73.232.104; submcom=/opt/moab/bin/msub;;
	360	(lcsgih) queue=smallq; remote_addres=130.75.4.101; submcom=/opt/moab/bin/msub;;
[367]	361	(lck) remote_addres=165.132.26.61; submcom=/usr/torque/bin/qsub;;
[251]	362	(lctit) queue=lctit; remote_addres=172.17.75.161; submcom=/n1ge/TITECH_GRID/tools/bin/n1ge;;
[544]	363	(lcxt4) remote_addres=129.177.20.113; submcom=/opt/torque/2.4.9-snap.201005191035/bin/qsub;;
[437]	364	(lcxt5m) remote_addres=193.166.211.144; submcom=/opt/pbs/10.1.0.91350/bin/qsub;;
[251]	365	(nech) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=136.172.44.147; submcom="/usr/local/bin/qsub";;
	366	(necriam) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=172.16.1.131; submcom="/usr/bin/nqsII/qsub";;
	367	(vpp) qsubmem=m; qsubtime=t; queue=vpp; remote_addres=130.75.4.130;;
	368	(unics) qsubmem=d; qsubtime=t; queue=unics; remote_addres=130.75.6.1;;
	369	(*) printf "\n +++ hostname \"$remote_host\" not allowed";
	370	locat=parameter; exit;;
[1]	371	esac
	372	fi
	373
	374
	375	# EVTL. PRUEFEN, OB ANGEGEBENE QUEUE ZULAESSIG IST
	376	if [[ $no_default_queue != none ]]
	377	then
	378	error=false
	379	ndq=$no_default_queue
	380	case $remote_host in
	381	(ibm) case $ndq in
	382	(p690_express\|p690_standard\|p690_long) error=false;;
	383	(*) error=true;;
	384	esac;;
	385	(ibmb) case $ndq in
	386	(cdata\|cdev\|cexp\|c1\|cshare\|csolo\|cspec) error=false;;
	387	(*) error=true;;
	388	esac;;
	389	(ibmh) case $ndq in
[312]	390	(no_class) error=false;;
[1]	391	(*) error=true;;
	392	esac;;
	393	(ibms) case $ndq in
	394	(express\|normal\|p_express\|p_normal\|p_normal_1.3\|p_normal_1.7\|grand) error=false;;
	395	(*) error=true;;
	396	esac;;
	397	(ibmy) case $ndq in
	398	(parallel) error=false;;
	399	(*) error=true;;
	400	esac;;
[440]	401	(lckyoto) case $ndq in
	402	(eh\|ph) error=false;;
	403	(*) error=true;;
	404	esac;;
[191]	405	(lcsgib\|lcsgih) case $ndq in
[416]	406	(testq\|serialq\|smallq\|mediumq\|bigq\|workq\|dataq\|permq\|special1q) error=false;;
[191]	407	(*) error=true;;
	408	esac;;
[1]	409	(lctit) case $ndq in
[129]	410	(novice\|sla1\|sla2\|sla3\|RAM64GB\|RAM128GB) error=false;;
[1]	411	(*) error=true;;
	412	esac;;
	413	(t3eb) case $ndq in
	414	(berte\|p50\|p100\|p392\|forfree\|p25himem) error=false;;
	415	(*) error=true;;
	416	esac;;
[251]	417	(necriam) case $ndq in
[253]	418	(SP\|SS\|P6) error=false;;
[251]	419	(*) error=true;;
	420	esac;;
[1]	421	(t3eh) case $ndq in
	422	(para_t3e\|em\|k\|l\|lm\|comp_t3e\|c\|p\|ht) error=false;;
	423	(*) error=true;;
	424	esac;;
	425	(t3ej2\|t3ej5) case $ndq in
	426	(low\|normal\|high) error=false;;
	427	(*) error=true;;
	428	esac;;
	429	(t3es) case $ndq in
	430	(batch\|serial-4\|pe4\|p48\|pe16\|pe32\|pe64\|pe128) error=false;;
	431	(*) error=true;;
	432	esac;;
	433	(unics) case $ndq in
	434	(unics\|ht) error=false;;
	435	(*) error=true;;
	436	esac;;
	437	esac
	438	if [[ $error = true ]]
	439	then
	440	printf "\n +++ queue \"$no_default_queue\" on host \"$remote_host\" not allowed"
	441	locat=parameter; exit
	442	else
	443	queue=$no_default_queue
	444	fi
	445	fi
	446
	447
	448
	449	# KNOTENNUTZUNG IN ENTWICKLERQUEUE MUSS SHARED SEIN
	450	if [[ $node_usage != shared && $queue = cdev ]]
	451	then
	452	node_usage=shared
	453	fi
	454
	455
	456
	457	# PRUEFEN DER CPU-ZEIT, ZEIT NACH STUNDEN, MINUTEN UND SEKUNDEN
	458	# AUFTEILEN
	459	done=false
	460	while [[ $done = false ]]
	461	do
	462	if (( $cputime <= 0 ))
	463	then
	464	printf "\n +++ wrong cpu-time or cpu-time missing"
	465	printf "\n >>> Please type cpu-time in seconds as INTEGER:"
	466	printf "\n >>> "
	467	read cputime 1>/dev/null 2>&1
	468	else
	469	done=true
	470	fi
	471	done
	472	if [[ $remote_host = nech ]]
	473	then
	474	if (( tasks_per_node != 0 ))
	475	then
	476	(( cputime = cputime * tasks_per_node ))
	477	elif [[ $numprocs != 0 ]]
	478	then
	479	(( cputime = cputime * numprocs ))
	480	fi
	481	fi
	482	(( stunden = cputime / 3600 ))
	483	(( resttime = cputime - stunden * 3600 ))
	484	(( minuten = resttime / 60 ))
	485	(( sekunden = resttime - minuten * 60 ))
	486	timestring=${stunden}:${minuten}:${sekunden}
	487
	488
	489
	490	# PRUEFEN DER KERNSPEICHERANFORDERUNG
	491	done=false
	492	while [[ $done = false ]]
	493	do
	494	if (( memory <= 0 ))
	495	then
	496	printf "\n +++ wrong memory demand or memory demand missing"
	497	printf "\n >>> Please type memory in MByte per process as INTEGER:"
	498	printf "\n >>> "
	499	read memory 1>/dev/null 2>&1
	500	else
	501	done=true
	502	fi
	503	done
	504
[251]	505	if [[ $remote_host = nech \|\| $remote_host = necriam ]]
[1]	506	then
	507	if (( tasks_per_node != 0 ))
	508	then
	509	(( Memory = memory * tasks_per_node / 1000 ))
	510	elif [[ $numprocs != 0 ]]
	511	then
	512	(( Memory = memory * numprocs / 1000 ))
	513	else
	514	(( Memory = memory / 1000 ))
	515	fi
	516	fi
	517
	518
	519	# SPEICHERBERECHNUNG BEI OPENMP-NUTZUNG
	520	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	521	then
	522	(( memory = memory * threads_per_task ))
	523	fi
	524
	525
	526	# BERECHNUNG DER ANZAHL DER ZU VERWENDENDEN KNOTEN
	527	if (( tasks_per_node != 0 ))
	528	then
[377]	529	if [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
	530	then
	531	(( nodes = numprocs / tasks_per_node ))
	532	else
	533	(( nodes = numprocs / ( tasks_per_node * threads_per_task ) ))
	534	fi
[1]	535	fi
	536
	537
	538
	539	# HEADER-AUSGABE
	540	if [[ $verify = true ]]
	541	then
	542	printf "\n\n"
	543	printf "#--------------------------------------------------------------# \n"
	544	spalte1=SUBJOB;spalte2=$(date)
	545	printf "\| $spalte1$spalte2 \| \n"
	546	printf "\| \| \n"
	547	printf "\| values of parameters/options: \| \n"
	548	spalte1=local_host$punkte; spalte2=$punkte$local_host
	549	printf "\| $spalte1$spalte2 \| \n"
	550	spalte1=remote_host$punkte; spalte2=$punkte$remote_host
	551	printf "\| $spalte1$spalte2 \| \n"
	552	spalte1=queue$punkte; spalte2=$punkte$queue
	553	printf "\| $spalte1$spalte2 \| \n"
	554	spalte1=memory$punkte; spalte2="$punkte$memory mb"
	555	printf "\| $spalte1$spalte2 \| \n"
	556	spalte1=cputime$punkte; spalte2="$punkte$cputime sec"
	557	printf "\| $spalte1$spalte2 \| \n"
	558	spalte1=job_name$punkte; spalte2="$punkte$job_name"
	559	printf "\| $spalte1$spalte2 \| \n"
	560	printf "#--------------------------------------------------------------# \n\n"
	561
	562
	563	# KONTROLLABFRAGE, OB ALLES O.K.
	564	antwort="dummy"
	565	while [[ $antwort != y && $antwort != Y && $antwort != n && $antwort != N ]]
	566	do
	567	read antwort?" >>> continue (y/n) ? "
	568	done
	569	if [[ $antwort = n \|\| $antwort = N ]]
	570	then
	571	locat=verify; exit
	572	fi
	573	printf "\n"
	574	fi
	575
	576
	577
	578	# ZUFALLSKENNUNG GENERIEREN UND JOBNAMEN AUF ZIELRECHNER BESTIMMEN
	579	kennung=$RANDOM
	580	job_on_remhost=${job_name}_${kennung}_$local_host
	581	job_to_send=job_to_send_$kennung
	582	if [[ $delete_dayfile = false ]]
	583	then
	584	remote_dayfile=${local_host}_${job_name}_result_$kennung
	585	local_dayfile=${remote_host}_${job_name}
	586	else
	587	remote_dayfile=/dev/null
	588	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	589	then
	590	notification='# @ notification = never'
	591	fi
	592	fi
	593
	594
	595
	596	# QSUB- ODER LL-KOMMANDOS BZW. SKRIPTE GENERIEREN
	597	if [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs != 0 ]]
	598	then
	599
	600	if [[ $remote_host = ibmy ]]
	601	then
	602	consumable_memory=""
	603	else
	604	consumable_memory="ConsumableMemory($memory mb)"
	605	fi
[312]	606
	607	if [[ $remote_host = ibmh ]]
[1]	608	then
[312]	609	data_limit=""
	610	network_to_use=""
	611	class=""
	612	environment=""
[1]	613	else
[312]	614	class="# @ class = $queue"
	615	environment="# @ environment = OMP_NUM_THREADS=$threads_per_task; MP_SHARED_MEMORY=yes"
	616	if [[ $queue = cdev ]]
[1]	617	then
[312]	618	data_limit="# @ data_limit = 1.76gb"
	619	network_to_use="# @ network.mpi = sn_all,shared,ip"
[1]	620	else
[312]	621	if [[ $remote_host = ibms ]]
	622	then
	623	network_to_use="# @ network.mpi = csss,shared,us"
	624	elif [[ $remote_host = ibmy ]]
	625	then
	626	network_to_use=""
	627	else
	628	network_to_use="# @ network.mpi = sn_all,shared,us"
	629	data_limit="# @ data_limit = 1.76gb"
	630	fi
[1]	631	fi
	632	fi
	633
	634	cat > $job_to_send << %%END%%
	635	#!/bin/ksh
[312]	636	# @ shell = /bin/ksh
[1]	637
	638	# @ job_type = parallel
	639	# @ job_name = palm
	640	# @ wall_clock_limit = ${timestring},$timestring
	641	# @ resources = ConsumableCpus($threads_per_task) $consumable_memory
	642	# @ output = $remote_dayfile
	643	# @ error = $remote_dayfile
	644	# @ image_size = 50
[312]	645	$class
	646	$environment
[1]	647	$network_to_use
	648	$data_limit
	649	$notification
	650
	651	%%END%%
	652
	653	if (( nodes > 0 ))
	654	then
	655
	656	cat >> $job_to_send << %%END%%
	657	# @ node = $nodes
	658	# @ tasks_per_node = $tasks_per_node
	659	# @ node_usage = $node_usage
	660	# @ queue
	661
	662	%%END%%
	663
	664	else
	665
	666	if [[ $remote_host != ibmy ]]
	667	then
	668
	669	cat >> $job_to_send << %%END%%
	670	# @ blocking = unlimited
	671	# @ total_tasks = $numprocs
	672	# @ node_usage = $node_usage
	673	# @ queue
	674
	675	%%END%%
	676
	677	else
	678
	679	cat >> $job_to_send << %%END%%
	680	# @ node = 1
	681	# @ total_tasks = $numprocs
	682	# @ queue
	683
	684	%%END%%
	685
	686	fi
	687
	688	fi
	689
	690	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs = 0 ]]
	691	then
	692
	693	cat > $job_to_send << %%END%%
	694	#!/bin/ksh
	695
	696	# @ job_type = serial
	697	# @ node_usage = $node_usage
	698	# @ job_name = palm
	699	# @ wall_clock_limit = ${timestring},$timestring
	700	# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)
	701	# @ output = $remote_dayfile
	702	# @ error = $remote_dayfile
[312]	703	$class
[1]	704	$notification
	705
	706	# @ queue
	707
	708	%%END%%
	709
[108]	710	elif [[ $remote_host = lcfimm ]]
	711	then
	712
	713	if [[ $numprocs != 0 ]]
	714	then
	715	cat > $job_to_send << %%END%%
	716	#!/bin/ksh
	717	#PBS -N $job_name
[206]	718	#PBS -A geofysisk
[108]	719	#PBS -l walltime=$timestring
	720	#PBS -l nodes=${nodes}:ppn=$tasks_per_node
	721	#PBS -l pmem=${memory}mb
	722	#PBS -m abe
	723	#PBS -o $remote_dayfile
	724	#PBS -j oe
	725	mpd &
	726
	727	%%END%%
	728
[168]	729	else
	730	cat > $job_to_send << %%END%%
	731	#!/bin/ksh
	732	#PBS -N $job_name
[206]	733	#PBS -A geofysisk
[168]	734	#PBS -l walltime=$timestring
	735	#PBS -l ncpus=1
	736	#PBS -l pmem=${memory}mb
	737	#PBS -m abe
	738	#PBS -o $remote_dayfile
	739	#PBS -j oe
	740
	741	%%END%%
	742
	743	fi
	744
[368]	745	elif [[ $remote_host = lck ]]
	746	then
	747
	748	if [[ $numprocs != 0 ]]
	749	then
	750	cat > $job_to_send << %%END%%
	751	#!/bin/ksh
	752	#PBS -N $job_name
	753	#PBS -l walltime=$timestring
	754	#PBS -l ncpus=$numprocs
	755	#PBS -l pmem=${memory}mb
	756	#PBS -o $remote_dayfile
	757	#PBS -j oe
	758
	759	mpd &
	760
	761	%%END%%
	762
	763	else
	764	cat > $job_to_send << %%END%%
	765	#!/bin/ksh
	766	#PBS -N $job_name
	767	#PBS -l walltime=$timestring
	768	#PBS -l ncpus=1
	769	#PBS -l pmem=${memory}mb
	770	#PBS -o $remote_dayfile
	771	#PBS -j oe
	772
	773	%%END%%
	774
	775	fi
	776
[181]	777	elif [[ $remote_host = lcsgih \|\| $remote_host = lcsgib ]]
[179]	778	then
	779
[376]	780	if [[ "$sgi_feature" != "" ]]
	781	then
	782	feature_directive="#PBS -l feature=$sgi_feature"
	783	else
	784	feature_directive=""
	785	fi
[399]	786
[416]	787	if [[ $queue = dataq \|\| $queue = permq ]]
[399]	788	then
	789	feature_directive="#PBS -l feature=data"
	790	fi
[376]	791
[416]	792	if [[ $queue = testq \|\| $queue = workq \|\| $queue = dataq \|\| $queue = permq \|\| $queue = serialq \|\| $queue = special1q ]]
[191]	793	then
	794	queue_directive="#PBS -q $queue"
	795	else
	796	queue_directive=""
	797	fi
	798
[352]	799	if [[ $email_notification = none ]]
	800	then
	801	email_directive=""
	802	else
	803	email_directive="#PBS -M $email_notification"
	804	fi
	805
[179]	806	if [[ $numprocs != 0 ]]
	807	then
	808	cat > $job_to_send << %%END%%
[181]	809	#!/bin/bash
[179]	810	#PBS -N $job_name
	811	#PBS -l walltime=$timestring
[181]	812	#PBS -l nodes=$nodes:ppn=${tasks_per_node}
	813	#PBS -l naccesspolicy=$node_usage
[179]	814	#PBS -o $remote_dayfile
	815	#PBS -j oe
[376]	816	$feature_directive
[191]	817	$queue_directive
[352]	818	$email_directive
[179]	819
	820	. /usr/share/modules/init/bash
[493]	821	$module_calls
[374]	822
[181]	823	echo ld_library_path=\$LD_LIBRARY_PATH
[179]	824
	825	%%END%%
	826
	827	else
	828	cat > $job_to_send << %%END%%
	829	#PBS -S /bin/bash
	830	#PBS -N $job_name
	831	#PBS -l walltime=$timestring
	832	#PBS -l ncpus=1
	833	#PBS -o $remote_dayfile
[475]	834	#PBS -j oe
[400]	835	$queue_directive
	836	$email_directive
[179]	837
[475]	838	. /usr/share/modules/init/bash
[493]	839	$module_calls
[475]	840
[179]	841	%%END%%
	842
	843	fi
	844
[164]	845	elif [[ $remote_host = lcxt4 ]]
	846	then
	847
	848	if [[ $numprocs != 0 ]]
	849	then
	850	cat > $job_to_send << %%END%%
	851	#!/bin/ksh
	852	#PBS -S /bin/ksh
	853	#PBS -N $job_name
[206]	854	#PBS -A geofysisk
	855	#PBS -j oe
[164]	856	#PBS -l walltime=$timestring
	857	#PBS -l mppwidth=${numprocs}
	858	#PBS -l mppnppn=${tasks_per_node}
	859	#PBS -m abe
	860	#PBS -o $remote_dayfile
[492]	861	$email_directive
[164]	862
[343]	863	. /opt/modules/default/init/ksh
[493]	864	$module_calls
[343]	865
[164]	866	%%END%%
	867
[108]	868	else
	869	cat > $job_to_send << %%END%%
	870	#!/bin/ksh
[168]	871	#PBS -S /bin/ksh
[108]	872	#PBS -N $job_name
[206]	873	#PBS -A geofysisk
	874	#PBS -j oe
[108]	875	#PBS -l walltime=$timestring
	876	#PBS -l ncpus=1
	877	#PBS -l pmem=${memory}mb
	878	#PBS -m abe
[492]	879	$email_directive
[108]	880	#PBS -o $remote_dayfile
	881
[343]	882	. /opt/modules/default/init/ksh
[493]	883	$module_calls
[343]	884
[108]	885	%%END%%
	886
	887	fi
	888
[440]	889	elif [[ $remote_host = lckyoto ]]
[437]	890	then
	891
[440]	892	cat > $job_to_send << %%END%%
	893	#!/bin/ksh
	894	# @\$-o $remote_dayfile
	895	# @\$-eo -oi
	896	# @\$-lP 16
	897	# @\$-lp 1
	898	# @\$-lm 28gb -llm unlimited -ls unlimited
	899	# @\$-q $queue
	900	# @\$-Pvn abs_pack
	901	##for intel? @\$-Pvn abs_unpack -Pvs unpack -Pvc unpack
	902	#. /thin/local/etc/setprofile/intel-11.0.sh
	903	#. /thin/local/etc/setprofile/mvapich2-1.4+intel-11.0.sh
	904	. ~/.myprofile
	905	#. /home2/t/t51254/palm/current_version/myprofile
	906	#. /thin/apps/pgi/mpi.sh
	907	#
	908	env
	909	#
	910	set -x
	911
	912	%%END%%
	913
	914	elif [[ $remote_host = lcxt5m ]]
	915	then
	916
[437]	917	if [[ $numprocs != 0 ]]
	918	then
	919	cat > $job_to_send << %%END%%
	920	#!/bin/ksh
	921	#PBS -S /bin/ksh
	922	#PBS -N $job_name
	923	#PBS -j oe
	924	#PBS -l walltime=$timestring
	925	#PBS -l mppwidth=${numprocs}
	926	#PBS -l mppnppn=${tasks_per_node}
	927	#PBS -m abe
	928	#PBS -o $remote_dayfile
	929
	930	. /opt/modules/default/init/ksh
[493]	931	$module_calls
[437]	932
	933	%%END%%
	934
	935	else
	936	cat > $job_to_send << %%END%%
	937	#!/bin/ksh
	938	#PBS -S /bin/ksh
	939	#PBS -N $job_name
	940	#PBS -j oe
	941	#PBS -l walltime=$timestring
	942	#PBS -l ncpus=1
	943	#PBS -l pmem=${memory}mb
	944	#PBS -m abe
	945	#PBS -o $remote_dayfile
	946
	947	. /opt/modules/default/init/ksh
[493]	948	$module_calls
[437]	949
	950	%%END%%
	951
	952	fi
	953
[1]	954	elif [[ $remote_host = nech ]]
	955	then
	956
	957	if (( nodes > 1 ))
	958	then
	959	cat > $job_to_send << %%END%%
	960	#!/bin/ksh
	961	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
	962	#PBS -l ${qsubmem}=${Memory}gb
	963	#PBS -b $nodes
	964	#PBS -o $remote_dayfile
	965	#PBS -N palm
	966	#PBS -j o
	967	#PBS -T mpisx
	968
	969	%%END%%
	970
	971	elif [[ $numprocs != 0 ]]
	972	then
	973	cat > $job_to_send << %%END%%
	974	#!/bin/ksh
	975	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
	976	#PBS -l ${qsubmem}=${Memory}gb
	977	#PBS -o $remote_dayfile
	978	#PBS -N palm
	979	#PBS -j o
	980
	981	%%END%%
	982
	983	else
	984	cat > $job_to_send << %%END%%
	985	#!/bin/ksh
	986	#PBS -l ${qsubmem}=${Memory}gb,${qsubtime}=$cputime
	987	#PBS -o $remote_dayfile
	988	#PBS -j o
	989
	990	%%END%%
	991
	992	fi
	993
[251]	994	elif [[ $remote_host = necriam ]]
[35]	995	then
	996
	997	if (( nodes > 1 ))
	998	then
	999	cat > $job_to_send << %%END%%
	1000	#!/bin/ksh
	1001	#PBS -b $nodes
	1002	#PBS -o $remote_dayfile
[253]	1003	#PBS -N $job_name
[35]	1004	#PBS -j o
[251]	1005	#PBS -v MPIPROGINV=YES
[35]	1006
	1007	%%END%%
	1008
	1009	elif [[ $numprocs != 0 ]]
	1010	then
	1011	cat > $job_to_send << %%END%%
	1012	#!/bin/ksh
	1013	#PBS -q ${queue}
	1014	#PBS -o $remote_dayfile
[253]	1015	#PBS -N $job_name
[35]	1016	#PBS -j o
[251]	1017	#PBS -v MPIPROGINV=YES
[35]	1018
	1019	%%END%%
	1020
	1021	else
	1022	cat > $job_to_send << %%END%%
	1023	#!/bin/ksh
	1024	#PBS -o $remote_dayfile
	1025	#PBS -j o
	1026
	1027	%%END%%
	1028
	1029	fi
	1030
[1]	1031	elif [[ $remote_host = lctit ]]
	1032	then
	1033	cat > $job_to_send << %%END%%
	1034	#!/bin/bash
	1035	#$ -S /bin/bash
	1036	cd $job_catalog
[69]	1037	export PATH=$PALM_BIN:\$PATH
	1038	echo \$PATH
[1]	1039
	1040	%%END%%
	1041
	1042	# OPTIONEN FUER SUBMIT-KOMMANDO ZUSAMMENSTELLEN
[118]	1043	# submcom="$submcom -N $job_name -sgeout $remote_dayfile -q default"
[122]	1044	submcom="$submcom -g $group_number -N $job_name -rt 4320 -sgeout $remote_dayfile -q $node_usage "
[1]	1045
	1046	else
	1047
	1048	cat > $job_to_send << %%END%%
	1049	# @\$-q ${queue}
	1050	# @\$-l${qsubtime} $timestring
	1051	# @\$-l${qsubmem} ${memory}mb
	1052	# @\$-o $remote_dayfile
	1053	# @\$-eo
	1054
	1055	%%END%%
	1056
	1057	fi
	1058
	1059
	1060	# BEI RECHNUNG AUF REMOTE-MASCHINEN RUECKTRANSFER DES DAYFILES PER TRAP
	1061	# BEI EXIT VERANLASSEN
	1062	# VEKTORRECHNER MUSS EIGENEN JOB STARTEN, DA DORT NOHUP NICHT FUNKTIONIERT
	1063	# AUF IBM IN SEOUL IST RUECKTRANSFER ZUR ZEIT GENERELL NICHT MOEGLICH
	1064	if [[ $delete_dayfile = false && $remote_host != $local_host ]]
	1065	then
	1066	echo "set +vx" >> $job_to_send
	1067	echo "trap '" >> $job_to_send
	1068	echo "set +vx" >> $job_to_send
[181]	1069	if [[ $(echo $remote_host \| cut -c1-3) = ibm \|\| $(echo $remote_host \| cut -c1-5) = lcsgi \|\| $(echo $remote_host \| cut -c1-3) = nec \|\| $remote_host = lctit ]]
[1]	1070	then
	1071	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1072	then
	1073	return_queue=c1
	1074	elif [[ $remote_host = ibms ]]
	1075	then
	1076	return_queue=p_normal
	1077	elif [[ $remote_host = ibmy ]]
	1078	then
	1079	return_queue=serial
[325]	1080	elif [[ $remote_host = lcsgih \|\| $remote_host = lcsgib ]]
	1081	then
[326]	1082	return_queue=serialq
[1]	1083	elif [[ $remote_host = lctit ]]
	1084	then
[118]	1085	return_queue=sla3
[251]	1086	elif [[ $remote_host = necriam ]]
[1]	1087	then
[253]	1088	return_queue=SP
[1]	1089	else
	1090	return_queue=unknown
	1091	fi
	1092
	1093	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	1094	then
	1095
	1096	echo "echo \"#!/bin/ksh\" >> scpjob.$kennung" >> $job_to_send
	1097	echo "echo \"# @ job_type = serial\" >> scpjob.$kennung" >> $job_to_send
	1098	echo "echo \"# @ job_name = transfer\" >> scpjob.$kennung" >> $job_to_send
	1099	echo "echo \"# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)\" >> scpjob.$kennung" >> $job_to_send
	1100	echo "echo \"# @ wall_clock_limit = 00:10:00,00:10:00\" >> scpjob.$kennung " >> $job_to_send
	1101	echo "echo \"# @ output = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
	1102	echo "echo \"# @ error = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
[312]	1103	if [[ $host != "ibmh" ]]
	1104	then
	1105	echo "echo \"# @ class = $return_queue\" >> scpjob.$kennung" >> $job_to_send
	1106	fi
[1]	1107	echo "echo \"# @ image_size = 10\" >> scpjob.$kennung" >> $job_to_send
	1108	echo "echo \"# @ notification = never\" >> scpjob.$kennung" >> $job_to_send
	1109
	1110	echo "echo \"# @ queue\" >> scpjob.$kennung" >> $job_to_send
	1111	echo "echo \" \" >> scpjob.$kennung" >> $job_to_send
	1112
	1113	echo "echo \"set -x\" >> scpjob.$kennung" >> $job_to_send
	1114	echo "echo \"batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \\\"$job_catalog\\\" $local_dayfile\" >> scpjob.$kennung" >> $job_to_send
	1115	echo "echo \"exit\" >> scpjob.$kennung" >> $job_to_send
	1116
	1117	elif [[ $remote_host = nech ]]
	1118	then
	1119	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
	1120	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
	1121	echo "#PBS -l ${qsubmem}=1GB,${qsubtime}=100" >> $job_to_send
	1122	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
	1123	echo "#PBS -j o" >> $job_to_send
	1124	echo " " >> $job_to_send
	1125	echo "set -x" >> $job_to_send
	1126	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
	1127	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
	1128	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
	1129	echo "%%END%%" >> $job_to_send
	1130
[251]	1131	elif [[ $remote_host = necriam ]]
[35]	1132	then
	1133	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
	1134	echo "#PBS -q $return_queue" >> $job_to_send
	1135	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
	1136	echo "#PBS -j o" >> $job_to_send
	1137	echo " " >> $job_to_send
	1138	echo "set -x" >> $job_to_send
	1139	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
	1140	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
	1141	echo "%%END%%" >> $job_to_send
	1142
[181]	1143	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
	1144	then
	1145	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
	1146	echo "#!/bin/bash" >> $job_to_send
	1147	echo "#PBS -N job_protocol_transfer" >> $job_to_send
[325]	1148	echo "#PBS -l walltime=00:30:00" >> $job_to_send
[181]	1149	echo "#PBS -l nodes=1:ppn=1" >> $job_to_send
[366]	1150	echo "#PBS -l feature=data" >> $job_to_send
[181]	1151	echo "#PBS -o \$HOME/job_queue/last_job_transfer_protocol" >> $job_to_send
	1152	echo "#PBS -j oe" >> $job_to_send
	1153	echo " " >> $job_to_send
	1154	echo ". /usr/share/modules/init/bash" >> $job_to_send
	1155	echo "set -x" >> $job_to_send
	1156	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
	1157	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
	1158	echo "%%END%%" >> $job_to_send
	1159
[1]	1160	elif [[ $remote_host = lctit ]]
	1161	then
	1162	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
	1163	echo "set -x" >> $job_to_send
	1164	echo "PATH=\$PATH:$job_catalog/../pub" >> $job_to_send
	1165	echo "cd $job_catalog" >> $job_to_send
	1166	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
	1167	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
	1168	echo "%%END%%" >> $job_to_send
	1169
	1170	else
	1171
	1172	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
	1173	echo "# @\\\$-q $return_queue" >> $job_to_send
	1174	echo "# @\\\$-l${qsubtime} 10" >> $job_to_send
	1175	echo "# @\\\$-l${qsubmem} 10mb" >> $job_to_send
	1176	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es ]]
	1177	then
	1178	echo "# @\$-l mpp_p=0" >> $job_to_send
	1179	fi
	1180	echo '# @\$-lF 10mb' >> $job_to_send
	1181	# echo '# @\$-o /dev/null' >> $job_to_send
	1182	echo '# @\$-o job_queue/last_job_transfer_protocol' >> $job_to_send
	1183	echo '# @\\\$-eo' >> $job_to_send
	1184	echo " " >> $job_to_send
	1185	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
	1186	then
	1187	echo "set +vx" >> $job_to_send
	1188	echo ". .profile" >> $job_to_send
	1189	fi
	1190	echo "set -x" >> $job_to_send
	1191	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null" >> $job_to_send
	1192	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
	1193	echo "%%END%%" >> $job_to_send
	1194	fi
	1195
	1196	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	1197	then
	1198	echo "llsubmit scpjob.$kennung" >> $job_to_send
[181]	1199	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
	1200	then
	1201	echo "chmod u+x scpjob.$kennung" >> $job_to_send
	1202	echo "msub scpjob.$kennung" >> $job_to_send
[1]	1203	elif [[ $remote_host = lctit ]]
	1204	then
	1205	echo "chmod u+x scpjob.$kennung" >> $job_to_send
	1206	echo "rm -rf ${job_catalog}/last_job_transfer_protocol" >> $job_to_send
	1207	echo "n1ge -N jobtransfer -q $return_queue -sgeout ${job_catalog}/last_job_transfer_protocol scpjob.$kennung" >> $job_to_send
	1208	echo "sleep 10" >> $job_to_send
	1209	elif [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
	1210	then
	1211	echo "qsub -J n scpjob.$kennung" >> $job_to_send
	1212	elif [[ $remote_host = t3es ]]
	1213	then
	1214	echo "qsub -J n -s /bin/ksh scpjob.$kennung" >> $job_to_send
	1215	else
	1216	echo "qsub scpjob.$kennung" >> $job_to_send
	1217	fi
	1218	echo "rm scpjob.$kennung" >> $job_to_send
	1219	if [[ $remote_host = nech ]]
	1220	then
	1221	echo "cd -" >> $job_to_send
	1222	fi
	1223	else
	1224	# echo "ftpcopy -d $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
	1225	echo "nohup ftpcopy -d -w 15 $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null &" >> $job_to_send
	1226	fi
	1227	echo "set -x" >> $job_to_send
	1228	echo " ' exit" >> $job_to_send
	1229	echo "set -x" >> $job_to_send
	1230	fi
	1231
	1232
	1233
	1234	# EIGENTLICHE JOB-DATEI AN QSUB-KOMMANDOS ANHAENGEN
	1235	cat $file_to_send >> $job_to_send
[69]	1236
[1]	1237	if [[ $remote_host = ibm ]]
	1238	then
	1239	echo " " >> $job_to_send
	1240	echo "exit" >> $job_to_send
	1241	fi
[69]	1242	if [[ $remote_host = lctit ]]
	1243	then
	1244	echo " " >> $job_to_send
	1245	echo "rm ~/job_queue/$job_on_remhost" >> $job_to_send
	1246	fi
[1]	1247
	1248
	1249
	1250	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
	1251	if [[ -z $remote_user ]]
	1252	then
	1253	if [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es \|\| $remote_host = vpp ]]
	1254	then
	1255	grep $remote_addres ~/.netrc \| read dum dum dum remote_user dum dum
	1256	fi
	1257	fi
	1258
	1259
	1260
	1261	# JOB AUF ZIELRECHNER TRANSFERIEREN BZW. INS JOBVERZEICHNIS KOPIEREN
	1262	if [[ $no_submit = false ]]
	1263	then
	1264	if [[ $remote_host != $local_host ]]
	1265	then
	1266	[[ $verify = true ]] && printf "\n >>> transfering job to \"$remote_host\"..."
[82]	1267	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]] # ssh on ibms cannot handle "~/"
[1]	1268	then
[82]	1269	job_catalog_save=$job_catalog
	1270	job_catalog=job_queue
	1271	elif [[ $remote_host = nech ]]
	1272	then
	1273	job_catalog_save=$job_catalog
	1274	job_catalog=/hpf/b/${remote_user}/job_queue
	1275	fi
	1276	if [[ $local_host = decalpha ]]
	1277	then
	1278	# VERWENDUNG VON SCP AUF DECALPHA FRAGT FEHLERHAFTERWEISE
	1279	# PASSWORT AB
	1280	/bin/scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
	1281	elif [[ $remote_host = nech ]]
	1282	then
	1283	# DATEIEN KOENNEN NUR UEBER DEN ARCHIVE-SERVER DES DKRZ
	1284	# TRANSFERIERT WERDEN
	1285	scp $job_to_send ${remote_user}@136.172.44.205:${job_catalog}/$job_on_remhost
[1]	1286	else
[82]	1287	scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
[1]	1288	fi
[82]	1289	if [[ $? = 1 ]]
	1290	then
	1291	locat=scp; exit
	1292	fi
	1293	if [[ $remote_host = ibms ]]
	1294	then
	1295	job_catalog=$job_catalog_save
	1296	fi
[1]	1297	[[ $verify = true ]] && printf "\n >>> finished\n"
	1298	else
	1299	eval job_catalog=$job_catalog
	1300	cp $job_to_send ${job_catalog}/$job_on_remhost
	1301	fi
	1302
	1303
	1304
	1305	# NQS- BZW. LOADLEVELER-JOB STARTEN
	1306	if [[ $remote_host != $local_host ]]
	1307	then
	1308	[[ $verify = true ]] && printf "\n >>> submitting job using \"qsub\"...\n"
[82]	1309	if [[ $remote_host != lctit ]]
[1]	1310	then
[372]	1311	if [[ $(echo $remote_host \| cut -c1-5) = lcsgi && $prio = true ]]
	1312	then
	1313	printf "\n >>> submit with HLRN qos-feature hiprio...\n"
	1314	ssh $remote_addres -l $remote_user "cd $job_catalog; $submcom -l qos=hiprio $job_on_remhost; rm $job_on_remhost"
	1315	else
	1316	ssh $remote_addres -l $remote_user "cd $job_catalog; $submcom $job_on_remhost; rm $job_on_remhost"
	1317	fi
[1]	1318	else
[206]	1319	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[82]	1320	# MIT SSH, DESHALB AUFRUF PER PIPE
	1321	# UEBERGANGSWEISE CHECK, OB N1GE ENVIRONMENT WIRKLICH VERFUEGBAR
	1322	print "cd $job_catalog; chmod u+x $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
	1323	echo "first try" > send_protocol
	1324	while [[ $(cat send_protocol \| grep -c "Forwarding to N1GE") = 0 ]]
	1325	do
	1326	if [[ $(cat send_protocol \| grep -c "first try") = 1 ]]
	1327	then
	1328	printf "\n trying to submit job to TIT cluster..."
	1329	else
	1330	printf "\n +++ failed ... trying to submit again ..."
	1331	fi
	1332	print "cd $job_catalog; $submcom $job_on_remhost" \| ssh $remote_addres -l $remote_user > send_protocol 2>&1
	1333	cat send_protocol
	1334	done
	1335	sleep 10
	1336	print "cd $job_catalog; rm $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
	1337	echo "$submcom $job_on_remhost"
	1338	rm send_protocol
	1339	fi
[1]	1340
	1341	[[ $verify = true ]] && printf " >>> o.k.\n"
	1342	else
	1343	cd $job_catalog
[210]	1344	if [[ $(echo $local_host \| cut -c1-5) = lcsgi \|\| $(echo $local_host \| cut -c1-3) = ibm ]]
[1]	1345	then
	1346	eval $submcom $job_on_remhost
[367]	1347	elif [[ $local_host = lcfimm \|\| $local_host = lctit \|\| $localhost = lcxt4 \|\| $localhost = lck ]]
[108]	1348	then
	1349	eval $submcom $job_on_remhost
	1350	echo "$submcom $job_on_remhost"
	1351	chmod u+x $job_on_remhost
[407]	1352
[292]	1353	elif [[ $(echo $local_host \| cut -c1-5) = lcsgi ]]
	1354	then
	1355	eval $submcom $job_on_remhost
[1]	1356	elif [[ $local_host = nech ]]
	1357	then
	1358	if [[ $queue = default ]]
	1359	then
	1360	eval $submcom $job_on_remhost
	1361	else
	1362	eval $submcom -q $queue $job_on_remhost
	1363	fi
	1364	else
	1365	qsub $job_on_remhost
	1366	fi
[69]	1367	# JOBFILE DARF AUF LCTIT NICHT GELOESCHT WERDEN!! GESCHIEHT ERST AM JOBENDE
	1368	[[ $local_host != lctit ]] && rm $job_on_remhost
[1]	1369	cd - > /dev/null
	1370	fi
	1371	fi
	1372
	1373
	1374
	1375	# ABSCHLUSSARBEITEN
	1376
	1377	if [[ $no_submit = false ]]
	1378	then
	1379	rm $job_to_send
	1380	fi
	1381	[[ $verify = true ]] && printf "\n\n *** SUBJOB finished \n\n"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |