Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild_new @ 1

Last change on this file since 1 was 1, checked in by raasch, 18 years ago
Initial repository layout and content
File size: 46.5 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript Version: @(#)MBUILD 1.0 07/02/07
3
4	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
5	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
6	# Rechner
7
8	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
9	# verwendet wird:
10	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
11	# nach aussen weitergegeben. "while read line" funktioniert nicht
12	# innerhalb einer Pipe.
13
14	# letzte Aenderung:
15	# 06/05/02 - Siggi - Beginn der Entwicklung
16	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
17	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
18	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
19	# unter linux mehr noetig, da nun AT&T-Korn-Shell
20	# benutzt wird
21	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
22	# 19/12/02 - Siggi - ibmb validiert
23	# 05/02/03 - Siggi - hostname nobela included
24	# 04/03/03 - Siggi - host nech included
25	# 06/03/03 - Siggi - make_call_string is echoed without '' to
26	# file LAST_MAKE_CALL (otherwise error on NEC, because
27	# '' are part of compiler options
28	# 16/03/03 - Siggi - Two underscores are placed in front of every define
29	# string, in case that palm.f90 version contains
30	# such strings
31	# 16/04/03 - Siggi - First extensions for linux machines
32	# 24/06/03 - Siggi - host orkan included
33	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
34	# 24/07/03 - Siggi - host maestro admitted
35	# 06/08/03 - Siggi - host gregale admitted
36	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
37	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
38	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
39	# (-D$OMP=OMP) in order to avoid problems with
40	# OMP_NUM_THREADS
41	# 09/01/04 - Siggi - action above cancelled
42	# 28/01/04 - Siggi - action above re-cancelled
43	# 08/03/04 - Siggi - host scirocco admitted
44	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
45	# the respective .f90 file is not listed in the makefile
46	# and deletion is demanded by the user
47	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
48	# due to error in ssh installation (otherwise a prompt
49	# for the password appears)
50	# 23/07/04 - Siggi - changes due to the new berni configuration
51	# (federation switch)
52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
53	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
54	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
55	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
56	# 24/04/05 - Siggi - netcdf support on lcmuk
57	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
58	# 12/05/05 - Siggi - netcdf support on ibm
59	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
60	# 18/05/05 - Siggi - netcdf support on nec
61	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
62	# 23/05/05 - Siggi - netcdf support on ibms
63	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
64	# 30/06/05 - Siggi - netcdf support on bora
65	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
66	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
67	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
68	# host gfdl5 (ibmy) admitted
69	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
70	# 20/01/06 - Siggi - cpp directive for ibmy
71	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
72	# 10/02/06 - Siggi - modifications for scp on decalpha
73	# 13/04/06 - Siggi - ostria admitted
74	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
75	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
76	# 29/05/05 - Siggi - atmos (lcide) admitted
77	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
78	# 24/11/06 - Siggi - breva and levanto admitted
79	# 07/02/07 - Siggi - adapted for RIAM (neck)
80
81
82
83	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
84	config_file=.mrun.config
85	host=all
86	host_found=false
87	ibm_hb_done=false
88	lcmuk_done=false
89	locat=normal
90	makefile=""
91	remote_mode=interactive
92	scirocco=false
93	silent=false
94	suf=f90
95	update=false
96
97	typeset -i ih ihost=0
98
99	typeset -R50 calltime
100	typeset -L20 column1
101	typeset -L50 column2
102	typeset -L70 column3
103	typeset -L20 version="MBUILD 1.0"
104
105	# FEHLERBEHANDLUNG
106	# BEI EXIT:
107	trap 'if [[ $locat != normal ]]
108	then
109	printf "\n\n +++ mbuild killed \n\n"
110	else
111	printf "\n\n *** mbuild finished \n\n"
112	fi' exit
113
114
115	# BEI TERMINAL-BREAK:
116	trap 'printf "\n\n +++ mbuild killed by \"^C\" \n\n"
117	exit
118	' 2
119
120
121
122	# SHELLSCRIPT-OPTIONEN EINLESEN
123	while getopts :c:h:m:rs: option
124	do
125	case $option in
126	(c) config_file=$OPTARG;;
127	(h) host=$OPTARG;;
128	(m) makefile=$OPTARG;;
129	(r) remote_mode=batch;;
130	(s) suf=$OPTARG;;
131	(\?) printf "\n +++ unknown option $OPTARG \n";
132	locat=parameter; exit;;
133	esac
134	done
135
136
137
138	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
139	if [[ $remote_mode = batch ]]
140	then
141	printf "\n +++ sorry, batch mode does not work! \n"
142	locat=parameter; exit
143	fi
144
145
146
147	# LOKALEN RECHNER ERMITTELN
148	local_host_real_name=$(hostname)
149	local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
150	case $local_host_real_name in
151	(atmos) local_host=lcide;;
152	(berte) local_host=t3eb;;
153	(bora\|breva\|gregale\|irifi\|levanto\|maestro\|orkan\|ostria\|quanero\|scirocco) local_host=lcmuk;;
154	(argestes\|caurus\|caver\|chinook\|dschani\|gharra\|nevados\|poniente\|samun\|twister\|yalka) local_host=hpmuk;;
155	(gate) local_host=neck;;
156	(gfdl3.yonsei.ac.kr) local_host=decalpha; local_addres=165.132.26.56;;
157	(gfdl5) local_host=ibmy; local_addres=165.132.26.58;;
158	(gwdk081.gwdg.de) local_host=ibm;;
159	(hreg01a-en0\|hreg02a-en0) local_host=ibmh;;
160	(nobel\|nobela) local_host=ibms;;
161	(tgg*) local_host=lctit;;
162	(t3e) local_host=t3eh;;
163	(zam003) local_host=t3ej2;;
164	(zam005) local_host=t3ej5;;
165	(*) printf "\n +++ local host \"$local_host_real_name\" not admitted for mbuild \n"
166	locat=local_host; exit;;
167	esac
168
169	[[ $local_host_real_name = scirocco ]] && scirocco=true
170
171
172
173	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
174	if [[ ! -f $config_file ]]
175	then
176	printf "\n +++ configuration file: "
177	printf "\n $config_file"
178	printf "\n does not exist"
179	locat=configuration; exit
180	fi
181	if [[ $local_host != ibms ]]
182	then
183	config_file=$PWD/$config_file
184	else
185	config_file=`pwd`/$config_file
186	fi
187
188
189
190	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
191	line=""
192	grep " $local_host" $config_file \| grep "%remote_username" \| while read line
193	do
194	if [[ "$line" != "" \|\| $(echo $line \| cut -c1) != "#" ]]
195	then
196	local_username=`echo $line \| cut -d" " -s -f2`
197	fi
198	done
199
200	if [[ "$local_username" = "" ]]
201	then
202	printf "\n +++ no user name found in configuration file"
203	printf "\n for local host \"$local_host\" "
204	locat=config_file; exit
205	fi
206
207
208	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
209	# VEREINBART WURDE
210	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
211	then
212	printf "\n +++ no main program or more than one main program defined"
213	printf "\n in configuration file"
214	locat=configuration; exit
215	else
216	line=`grep "%mainprog" $config_file`
217	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
218	then
219	printf "\n +++ no main program defined in configuration file"
220	locat=configuration; exit
221	fi
222	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
223	fi
224
225
226
227	# LOKALEN QUELLTEXTPFAD ERMITTELN.
228	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
229	# VEREINBART WURDE
230	line=""
231	grep "%source_path" $config_file \| while read line
232	do
233	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
234	then
235	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
236	then
237	global_source_path=`echo $line \| cut -d" " -s -f2`
238	fi
239	fi
240	done
241
242	line=""
243	grep " $local_host" $config_file \| grep "%source_path" \| while read line
244	do
245	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
246	then
247	local_source_path=`echo $line \| cut -d" " -s -f2`
248	fi
249	done
250
251	if [[ "$local_source_path" = "" ]]
252	then
253	if [[ "$global_source_path" != "" ]]
254	then
255	local_source_path=$global_source_path
256	else
257	printf "\n +++ no source path found in configuration file"
258	printf "\n for local host \"$local_host\" "
259	printf "\n please set \"\%source_path\" in configuration file"
260	locat=config_file; exit
261	fi
262	fi
263	eval local_source_path=$local_source_path
264
265
266	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
267	line=""
268	grep "%depository_path" $config_file \| while read line
269	do
270	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
271	then
272	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
273	then
274	global_depository_path=`echo $line \| cut -d" " -s -f2`
275	fi
276	fi
277	done
278
279	line=""
280	grep " $local_host" $config_file \| grep "%depository_path" \| while read line
281	do
282	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
283	then
284	local_depository_path=`echo $line \| cut -d" " -s -f2`
285	fi
286	done
287
288	if [[ "$local_depository_path" = "" ]]
289	then
290	if [[ "$global_depository_path" != "" ]]
291	then
292	local_depository_path=$global_depository_path
293	else
294	printf "\n +++ no depository path found in configuration file"
295	printf "\n for local host \"$local_host\" "
296	printf "\n please set \"\%depository_path\" in configuration file"
297	locat=config_file; exit
298	fi
299	fi
300	eval local_depository_path=$local_depository_path
301
302
303
304	# MAKEFILE vorhanden
305	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
306	if [[ ! -f $makefile ]]
307	then
308	printf "\n +++ makefile: "
309	printf "\n $makefile"
310	printf "\n does not exist"
311	locat=makefile; exit
312	fi
313
314
315	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
316	calltime=$(date)
317	printf "\n"
318	printf "#------------------------------------------------------------------------# \n"
319	printf "\| $version$calltime \| \n"
320	printf "\| \| \n"
321	column1="called on:"; column2=$local_host_real_name
322	printf "\| $column1$column2 \| \n"
323	column1="local username:"; column2=$local_username
324	printf "\| $column1$column2 \| \n"
325	column1="local IP-addres:"; column2=$local_addres
326	printf "\| $column1$column2 \| \n"
327	column1="config file:"; column2=$config_file
328	printf "\| $column1$column2 \| \n"
329	column1="makefile:"; column2=$makefile
330	printf "\| $column1$column2 \| \n"
331	column1="local source path:"; column2=$local_source_path
332	printf "\| $column1$column2 \| \n"
333	column1="make depository:"; column2=$local_depository_path
334	printf "\| $column1$column2 \| \n"
335	printf "#------------------------------------------------------------------------# \n"
336
337	# printf "\| \| \n"
338
339
340	cd $local_source_path
341
342
343	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
344	source_code_files=`ls -1 *.$suf`
345
346
347
348	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
349	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
350	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
351	if [[ ! -d $local_depository_path ]]
352	then
353	if mkdir $local_depository_path
354	then
355	printf "\n\n *** directory for make depository:"
356	printf "\n $local_depository_path"
357	printf "\n was created\n"
358
359	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
360	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
361	printf "\n *** makefile and source code files are copied to"
362	printf "\n $local_depository_path\n"
363	printf "\n copying makefile \"$makefile\" ..."
364	cp -p $makefile $local_depository_path/Makefile
365
366	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
367	# SEIN
368	for filename in $source_code_files
369	do
370	if [[ $(grep -c $filename $makefile) = 0 ]]
371	then
372	printf "\n +++ source code file:"
373	printf "\n $filename"
374	printf "\n is not listed in makefile"
375	locat=makefile; exit
376	else
377	printf "\n copying source code file \"$filename\" ..."
378	cp -p $filename $local_depository_path
379	fi
380	done
381	printf "\n"
382	else
383	printf "\n +++ directory for make depository:"
384	printf "\n $local_depository_path"
385	printf "\n cannot be created"
386	locat=local_depository_path; exit
387	fi
388	else
389
390	printf "\n *** checking file status ..."
391
392	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
393	if [[ $makefile -nt $local_depository_path/Makefile ]]
394	then
395	printf "\n *** update of \"$makefile\" "
396	cp -f -p $makefile $local_depository_path/Makefile
397	update=true
398
399	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
400	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
401	cd $local_depository_path
402	source_code_files_in_depository=`ls -1 *.$suf`
403	for filename in $source_code_files_in_depository
404	do
405	if [[ $(grep -c $filename Makefile) = 0 ]]
406	then
407	printf "\n *** source code file in \"$local_depository_path\":"
408	printf "\n $filename"
409	printf "\n is not listed in makefile"
410	if [[ $silent = false ]]
411	then
412	answer=dummy
413	printf "\n\n"
414	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
415	do
416	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
417	read answer
418	done
419	if [[ $answer = y \|\| $answer = Y ]]
420	then
421	base=`echo $filename \| cut -d. -f2`
422	rm -f $filename
423	rm -f ${base}.o ${base}.mod
424	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
425	else
426	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
427	fi
428	fi
429	fi
430	done
431	cd - > /dev/null 2>&1
432
433	elif [[ $local_depository_path/Makefile -nt $makefile ]]
434	then
435	printf "\n *** makefile in depository is newer than"
436	printf "\n \"$makefile\" "
437	if [[ $silent = false ]]
438	then
439	answer=dummy
440	printf "\n\n"
441	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
442	do
443	printf " >>> update \"$makefile\" (y/n) ? "
444	read answer
445	done
446	if [[ $answer = y \|\| $answer = Y ]]
447	then
448	cp -f -p $local_depository_path/Makefile $makefile
449	printf "\n *** \"$makefile\" updated"
450	else
451	printf "\n *** \"$makefile\" not updated"
452	fi
453	fi
454	fi
455
456	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
457	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
458	for filename in $source_code_files
459	do
460	if [[ $(grep -c $filename $makefile) = 0 ]]
461	then
462	printf "\n +++ source code file:"
463	printf "\n $filename"
464	printf "\n is not listed in makefile"
465	locat=makefile; exit
466	else
467	if [[ ! -f $local_depository_path/$filename ]]
468	then
469	cp -p $filename $local_depository_path
470	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
471	fi
472	if [[ $filename -nt $local_depository_path/$filename ]]
473	then
474	printf "\n *** update of source code file \"$filename\" "
475	cp -f -p $filename $local_depository_path
476	update=true
477	fi
478	fi
479	done
480
481
482	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
483	# ODER EVTL. NEUEREN DATUMS SIND
484	cd $local_depository_path
485	source_code_files_in_depository=`ls -1 *.$suf`
486	cd - > /dev/null 2>&1
487	for filename in $source_code_files_in_depository
488	do
489	if [[ ! -f $filename ]]
490	then
491	printf "\n *** source code file \"$filename\" does not exist in current directory"
492	if [[ $silent = false ]]
493	then
494	answer=dummy
495	printf "\n\n"
496	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
497	do
498	printf " >>> create \"$filename\" in current directory (y/n) ? "
499	read answer
500	done
501	if [[ $answer = y \|\| $answer = Y ]]
502	then
503	cp -p $local_depository_path/$filename $filename
504	printf "\n *** source code file \"$filename\" created in current directory"
505	else
506	printf "\n *** source code file \"$filename\" not created in current directory"
507	fi
508	fi
509	elif [[ $local_depository_path/$filename -nt $filename ]]
510	then
511	ls -al $local_depository_path/$filename
512	ls -al $filename
513	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
514	if [[ $silent = false ]]
515	then
516	answer=dummy
517	printf "\n\n"
518	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
519	do
520	printf " >>> update \"$filename\" in current directory (y/n) ? "
521	read answer
522	done
523	if [[ $answer = y \|\| $answer = Y ]]
524	then
525	cp -f -p $local_depository_path/$filename $filename
526	printf "\n *** source code file \"$filename\" updated in current directory"
527	else
528	printf "\n *** source code file \"$filename\" not updated in current directory"
529	fi
530	fi
531	fi
532	done
533
534	if [[ $update = false ]]
535	then
536	printf "\n *** no updates necessary in \"$local_depository_path\" "
537	if [[ $silent = false ]]
538	then
539	answer=dummy
540	printf "\n\n"
541	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
542	do
543	printf " >>> continue with updates on remote hosts (y/n) ? "
544	read answer
545	done
546	if [[ $answer = n \|\| $answer = N ]]
547	then
548	locat=user_abort; exit
549	fi
550	fi
551	fi
552	fi
553
554
555
556	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
557	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
558	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
559	printf "\n\n *** tar of makefile and source files in depository ..."
560	cd $local_depository_path
561	chmod u+w Makefile *.$suf
562	tar -cf ${mainprog}_sources.tar Makefile *.$suf
563	printf "\n"
564
565
566
567	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
568	if [[ $host = all ]]
569	then
570	printf "\n *** updates will be made for ALL hosts found in"
571	printf "\n the configuration file"
572	else
573	printf "\n *** update will be made for host \"$host\" "
574	fi
575
576	if [[ $silent = false ]]
577	then
578	answer=dummy
579	printf "\n\n"
580	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
581	do
582	printf " >>> continue (y/n) ? "
583	read answer
584	done
585	if [[ $answer = n \|\| $answer = N ]]
586	then
587	locat=user_abort; exit
588	fi
589	fi
590
591
592
593
594	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
595	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
596	printf "\n *** scanning configuration file for host(s) ..."
597
598	grep %fopts $config_file \| while read line
599	do
600	# KOMMENTARZEILEN UEBERSPRINGEN
601	[[ $(echo $line \| cut -c1) = "#" ]] && continue
602	(( ihost = ihost + 1 ))
603	hostline[$ihost]="$line"
604	done
605
606
607	while (( ih < ihost ))
608	do
609
610	(( ih = ih + 1 ))
611
612	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
613	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
614	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
615	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
616	remote_host=`echo $remote_host_string \| cut -d" " -f1`
617	if [[ $host != all ]]
618	then
619	[[ $remote_host != $host ]] && continue
620	fi
621	host_found=true
622	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
623	if [[ $condition1 = $remote_host ]]
624	then
625	condition1=""
626	else
627	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
628	fi
629
630
631	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
632	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
633	then
634	if [[ $ibm_hb_done = true ]]
635	then
636	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
637	printf "\n been carried out on one of the HLRN machines\n"
638	continue
639	fi
640	fi
641
642	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
643	if [[ $remote_host = lcmuk ]]
644	then
645	if [[ $lcmuk_done = true ]]
646	then
647	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
648	printf "\n been carried out on this host\n"
649	continue
650	fi
651	fi
652
653
654	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
655	netcdf_support=false
656	case $remote_host in
657	(hpmuk) remote_addres=130.75.105.19;;
658	(lcmuk) remote_addres=130.75.105.3; cpp_options=""
659	netcdf_support=true
660	if [[ $scirocco = true ]]
661	then
662	netcdf_path=/opt/netcdf/3.6.2-beta4
663	else
664	netcdf_path=/muksoft/packages/netcdf/linux
665	fi;;
666	(lctit) remote_addres=172.17.75.161; netcdf_support=true
667	netcdf_path=/home/usr5/mkanda/netcdf-3.6.1/src; cpp_options="-Mpreprocess";;
668	(decalpha) remote_addres=165.132.26.56; cpp_options="-cpp"; netcdf_support=true
669	netcdf_path=/usr/local/netcdf-3.5.1;;
670	(ibm) remote_addres=134.76.99.81; cpp_options="-qsuffix=cpp=f90";;
671	(ibmb) remote_addres=130.73.230.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
672	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
673	(ibmh) remote_addres=130.75.4.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
674	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
675	(ibms) remote_addres=150.183.5.101; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
676	netcdf_path=/applic/lib/NETCDF64;;
677	(ibmy) remote_addres=165.132.26.58; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
678	netcdf_path=/usr1/users/raasch/pub/netcdf-3.6.0-p1;;
679	(nech) remote_addres=136.172.44.192; cpp_options="-Ep"; netcdf_support=true
680	netcdf_path=/pool/SX-6/netcdf/netcdf-3.6.0-p1;;
681	(neck) remote_addres=133.5.178.11; cpp_options="-Ep"; netcdf_support=true
682	netcdf_path=/home/DSRC/NC/tatuyama/pub/netcdf-3.6.0-p1;;
683	(t3eb) remote_addres=130.73.206.21; cpp_options="-eZ";;
684	(t3eh) remote_addres=130.75.4.131; cpp_options="-eZ";;
685	(t3ej2) remote_addres=134.94.100.22; cpp_options="-eZ";;
686	(t3ej5) remote_addres=134.94.100.49; cpp_options="-eZ";;
687	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
688	(*) printf "\n +++ remote host \"$remote_host\" unknown";
689	printf "\n please inform S. Raasch!";
690	locat=config_file; exit;;
691	esac
692
693
694	# REMOTE-USERNAMEN ERMITTELN
695	line=""
696	grep "$remote_host_string" $config_file \| grep "%remote_username" \| while read line1
697	do
698	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
699	then
700	line="$line1"
701	fi
702	done
703
704	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
705	then
706	printf "\n +++ no remote username found in configuration file"
707	printf "\n for \"$remote_host_string\" "
708	locat=config_file; exit
709	else
710	remote_username=`echo $line \| cut -d" " -s -f2`
711	fi
712
713
714	# REMOTE-QUELLTEXTPFAD ERMITTELN
715	line=""
716	grep "$remote_host_string" $config_file \| grep "%source_path" \| while read line1
717	do
718	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
719	then
720	line="$line1"
721	fi
722	done
723
724	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
725	then
726	remote_source_path=`echo $line \| cut -d" " -s -f2`
727	fi
728	if [[ "$remote_source_path" = "" ]]
729	then
730	if [[ "$global_source_path" != "" ]]
731	then
732	remote_source_path=$global_source_path
733	else
734	printf "\n +++ no source path found in configuration file"
735	printf "\n for \"$remote_host_string\" "
736	locat=config_file; exit
737	fi
738	fi
739
740
741	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
742	line=""
743	grep "$remote_host_string" $config_file \| grep "%depository_path" \| while read line1
744	do
745	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
746	then
747	line="$line1"
748	fi
749	done
750
751	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
752	then
753	remote_md=`echo $line \| cut -d" " -s -f2`
754	fi
755	if [[ "$remote_md" = "" ]]
756	then
757	if [[ "$global_depository_path" != "" ]]
758	then
759	remote_md=$global_depository_path
760	else
761	printf "\n +++ no depository path found in configuration file"
762	printf "\n for \"$remote_host_string\" "
763	printf "\n please set \"\%depository_path\" in configuration file"
764	locat=config_file; exit
765	fi
766	fi
767
768
769	# COMPILERNAMEN ERMITTELN
770	line=""
771	grep "$remote_host_string" $config_file \| grep "%compiler_name" \| while read line1
772	do
773	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
774	then
775	line="$line1"
776	fi
777	done
778
779	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
780	then
781	printf "\n +++ no compiler name found in configuration file"
782	printf "\n for \"$remote_host_string\" "
783	locat=config_file; exit
784	else
785	compiler_name=`echo $line \| cut -d" " -s -f2`
786	fi
787
788
789
790	# PRAEPROZESSOR-DIREKTIVEN SETZEN
791	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
792	then
793	if [[ $remote_host = ibms ]]
794	then
795	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
796	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf"
797	else
798	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
799	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf,-D__netcdf_64bit"
800	[[ $remote_host = ibmy ]] && cpp_options="${cpp_options},-D__ibmy_special"
801	fi
802	elif [[ $remote_host = lcmuk ]]
803	then
804	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
805	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
806	elif [[ $remote_host = lctit ]]
807	then
808	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
809	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
810	elif [[ $remote_host = decalpha ]]
811	then
812	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
813	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
814	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
815	then
816	cpp_options="$cpp_options -DMPI_REAL=MPI_REAL8 -DMPI_2REAL=MPI_2REAL8 -DSCFFT=DZFFT -DCSFFT=ZDFFT"
817	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
818	fi
819
820	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
821	then
822	for string in $remote_host_string
823	do
824	if [[ $(echo $string \| cut -c1-3) = ibm ]]
825	then
826	cpp_options="${cpp_options},-D__ibm"
827	if [[ $remote_host = ibmy ]]
828	then
829	cpp_options="${cpp_options},-D__ibmy_special"
830	fi
831	else
832	cpp_options="${cpp_options},-D__$string"
833	fi
834	done
835	cpp_options="$cpp_options "
836	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
837	then
838	for string in $remote_host_string
839	do
840	if [[ $(echo $string \| cut -c1-3) = nec ]]
841	then
842	cpp_options="${cpp_options} -D__nec"
843	else
844	cpp_options="${cpp_options} -D__$string"
845	fi
846	done
847	cpp_options="$cpp_options "
848	else
849	for string in $remote_host_string
850	do
851	cpp_options="$cpp_options -D__$string "
852	done
853	fi
854
855
856	# COMPILEROPTIONEN ERMITTELN
857	line=""
858	grep "$remote_host_string" $config_file \| grep "%fopts" \| while read line1
859	do
860	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
861	then
862	line="$line1"
863	fi
864	done
865	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
866	then
867	printf "\n +++ no compiler options found in configuration file"
868	printf "\n for \"$remote_host_string\" "
869	locat=config_file; exit
870	else
871	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
872	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
873	fi
874	if [[ $netcdf_support = true ]]
875	then
876	case $remote_host in
877	(decalpha) compiler_options="-I${netcdf_path}/include $compiler_options";;
878	(ibmb\|ibmh) compiler_options="-I ${netcdf_path}/include-64 $compiler_options";;
879	(ibms) compiler_options="-I /applic/netcdf64/src/f90 $compiler_options";;
880	(ibmy) compiler_options="-I ${netcdf_path}/include $compiler_options";;
881	(lcmuk) compiler_options="-I ${netcdf_path}/include $compiler_options";;
882	(lctit) compiler_options="-I ${netcdf_path}/f90 $compiler_options";;
883	(nech\|neck) compiler_options="-I ${netcdf_path}/include $compiler_options";;
884	esac
885	fi
886
887
888
889	# LADER-OPTIONEN ERMITTELN
890	line=""
891	grep "$remote_host_string" $config_file \| grep "%lopts" \| while read line1
892	do
893	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
894	then
895	line="$line1"
896	fi
897	done
898
899	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
900	then
901	printf "\n +++ no loader options found in configuration file"
902	printf "\n for \"$remote_host_string\" "
903	locat=config_file; exit
904	else
905	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
906	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
907	fi
908	if [[ $netcdf_support = true ]]
909	then
910	case $remote_host in
911	(decalpha) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
912	(ibmb\|ibmh\|lcmuk\|nech\|neck) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
913	(ibms) loader_options="$loader_options -L${netcdf_path} -lnetcdf";;
914	(ibmy) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
915	(lctit) loader_options="$loader_options -L${netcdf_path}/libsrc -lnetcdf";;
916	esac
917	fi
918
919
920	printf "\n\n#------------------------------------------------------------------------# \n"
921	if [[ $remote_host = $local_host ]]
922	then
923	column1="remote_host:"; column2="$remote_host (= local host!)"
924	else
925	column1="remote_host:"; column2=$remote_host
926	fi
927	printf "\| $column1$column2 \| \n"
928	printf "\| \| \n"
929	column1="conditions:"; column2="$condition1 $condition2"
930	printf "\| $column1$column2 \| \n"
931	column1="make depository:"; column2=$remote_md
932	printf "\| $column1$column2 \| \n"
933	column1="username:"; column2=$remote_username
934	printf "\| $column1$column2 \| \n"
935	column1="addres:"; column2=$remote_addres
936	printf "\| $column1$column2 \| \n"
937	column1="compiler:"; column2=$compiler_name
938	printf "\| $column1$column2 \| \n"
939	column1="cpp options:"; column2=$cpp_options
940	printf "\| $column1$column2 \| \n"
941	line=$(echo "$cpp_options" \| cut -c51-)
942	while [[ "$line" != "" ]]
943	do
944	column1=""
945	column2=$line
946	printf "\| $column1$column2 \| \n"
947	line=$(echo "$line" \| cut -c51-)
948	done
949	column1="compiler options:"; column2=$compiler_options
950	printf "\| $column1$column2 \| \n"
951	line=$(echo "$compiler_options" \| cut -c51-)
952	while [[ "$line" != "" ]]
953	do
954	column1=""
955	column2=$line
956	printf "\| $column1$column2 \| \n"
957	line=$(echo "$line" \| cut -c51-)
958	done
959	column1="loader options:"; column2=$loader_options
960	printf "\| $column1$column2 \| \n"
961	line=$(echo "$loader_options" \| cut -c51-)
962	while [[ "$line" != "" ]]
963	do
964	column1=""
965	column2=$line
966	printf "\| $column1$column2 \| \n"
967	line=$(echo "$line" \| cut -c51-)
968	done
969	printf "#------------------------------------------------------------------------# \n"
970
971	if [[ $silent = false ]]
972	then
973	answer=dummy
974	printf "\n\n"
975	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
976	do
977	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
978	read answer
979	done
980	if [[ $answer = a \|\| $answer = A ]]
981	then
982	locat=user_abort; exit
983	fi
984	if [[ $answer = c \|\| $answer = C ]]
985	then
986	silent=false
987	fi
988	if [[ $answer = s \|\| $answer = S ]]
989	then
990	continue
991	fi
992	fi
993
994
995	if [[ $remote_mode = batch ]]
996	then
997
998	# BATCH-JOB PARAMETER SETZEN
999	case $remote_host in
1000	(hpmuk) remote_addres=130.75.105.19;;
1001	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1002	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
1003	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1004	(hpmuk\|t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1005	esac
1006
1007
1008	# BATCH-JOB ZUSAMMENSTELLEN
1009	printf "\n *** creating batch-job for remote host"
1010	echo " " > mbuild_job
1011
1012	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1013	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1014	if [[ $remote_host = t3ej2 ]]
1015	then
1016	echo "set +vx" >> mbuild_job
1017	echo ". .profile" >> mbuild_job
1018	echo "set -x" >> mbuild_job
1019	fi
1020
1021	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1022	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
1023	then
1024	echo "module list" >> mbuild_job
1025	fi
1026
1027
1028	# WECHSEL IN TEMPORAERES VERZEICHNIS
1029	echo "cd ${remote_md}" >> mbuild_job
1030
1031
1032	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1033	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
1034	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
1035
1036
1037	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1038	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
1039
1040
1041	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1042	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
1043
1044
1045	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1046	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
1047	echo "chmod u+w *" >> mbuild_job
1048
1049	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1050	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
1051
1052
1053	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1054	echo "make clean" >> mbuild_job
1055	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1056	echo "rm *.f90 Makefile" >> mbuild_job
1057
1058
1059
1060	# JOB MITTELS SUBJOB STARTEN
1061	printf "\n *** sending batch job to remote host"
1062	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1063
1064
1065	# JOBFILE LOESCHEN
1066	# rm aljob
1067
1068	else
1069
1070	if [[ $remote_host != $local_host ]]
1071	then
1072
1073	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1074	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1075	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1076	if [[ $remote_host != lctit ]]
1077	then
1078	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1079	else
1080	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1081	# MIT SSH, DESHALB AUFRUF PER PIPE
1082	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1083	fi
1084	if [[ $local_host = decalpha ]]
1085	then
1086	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1087	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1088	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1089	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1090	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1091	else
1092	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1093	fi
1094
1095
1096
1097	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1098	echo " *** untar previous update on remote host, if existing"
1099	if [[ $remote_host != lctit ]]
1100	then
1101	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1102	else
1103	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1104	# MIT SSH, DESHALB AUFRUF PER PIPE
1105	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1106	fi
1107
1108
1109	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1110	echo " *** untar actual sources on remote host"
1111	if [[ $remote_host != lctit ]]
1112	then
1113	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1114	else
1115	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1116	# MIT SSH, DESHALB AUFRUF PER PIPE
1117	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1118	fi
1119
1120
1121	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1122	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1123	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1124	# Z.B. DIE PFADE ZUM COMPILER)
1125	echo " *** execute \"make\" on remote host"
1126
1127	if [[ $remote_host = nech ]]
1128	then
1129	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1130	else
1131	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1132	fi
1133
1134	if [[ $remote_host = t3eh ]]
1135	then
1136
1137	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1138
1139	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1140	then
1141
1142	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1143
1144	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1145	then
1146
1147	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1148
1149	elif [[ $remote_host = lctit ]]
1150	then
1151
1152	echo " " > ${remote_host}_last_make_protokoll
1153	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1154	do
1155	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1156	done
1157
1158	else
1159
1160	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1161
1162	fi
1163
1164	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1165	then
1166	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1167	if [[ $silent = false ]]
1168	then
1169	answer=dummy
1170	printf "\n"
1171	while [[ "$answer" != c && "$answer" != k ]]
1172	do
1173	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1174	read answer
1175	if [[ "$answer" = l ]]
1176	then
1177	more ${remote_host}_last_make_protokoll
1178	fi
1179	done
1180	if [[ $answer = k ]]
1181	then
1182	locat=user_abort; exit
1183	fi
1184	fi
1185	fi
1186
1187
1188
1189	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1190	printf "\n *** tar update on remote host ..."
1191	if [[ $remote_host != lctit ]]
1192	then
1193	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod"
1194	else
1195	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1196	# MIT SSH, DESHALB AUFRUF PER PIPE
1197	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1198	fi
1199
1200
1201	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1202	# printf "\n *** \"make clean\" on remote host ..."
1203	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1204	# printf "\n"
1205
1206
1207	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1208	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
1209
1210	else
1211
1212	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1213	echo " *** execute \"make\" on local host"
1214
1215	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1216
1217	if [[ $? != 0 ]]
1218	then
1219	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1220	if [[ $silent = false ]]
1221	then
1222	answer=dummy
1223	printf "\n"
1224	while [[ "$answer" != c && "$answer" != k ]]
1225	do
1226	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1227	read answer
1228	if [[ "$answer" = l ]]
1229	then
1230	more ${remote_host}_last_make_protokoll
1231	fi
1232	done
1233	if [[ $answer = k ]]
1234	then
1235	locat=user_abort; exit
1236	fi
1237	fi
1238	fi
1239
1240
1241	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1242	printf "\n *** tar update on local host ..."
1243	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1244
1245	# NUR EINMAL AUF LCMUK UEBERSETZEN
1246	[[ $remote_host = lcmuk ]] && lcmuk_done=true
1247
1248	fi
1249
1250	fi
1251	done
1252
1253
1254	if [[ $host_found = false ]]
1255	then
1256	if [[ $host = all ]]
1257	then
1258	printf "\n +++ no hosts found in configuration file"
1259	else
1260	printf "\n +++ host \"$host\" not found in configuration file"
1261	fi
1262	locat=config_file; exit
1263	fi
1264
1265
1266
1267	# ABSCHLIESSENDE ARBEITEN
1268	rm -f hosts_found_in_config_file
1269

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |