Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 844

Last change on this file since 844 was 818, checked in by maronga, 13 years ago
bugfix: namelist file check now possible for topography and re-enabled. mrungui update (-z option)
Property svn:keywords set to `Id Rev`
File size: 51.4 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 818 2012-02-08 16:11:23Z gryschka $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119	# 04/03/11 - BjornM- re-adjustments for lcxt4
120	# 06/03/11 - Siggi - adjustments for ibmkisti
121	# 03/04/11 - Micha - added lckordi
122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
126	# check program) has been added to the utility branch),
127	# modfified the compilation of mrungui
128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
129	# multiple localhost branches
130	# 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
131	# corrected
132
133
134
135	# VARIABLE DECLARATIONS + DEFAULT VALUES
136	compile_utility_programs=false
137	config_file=.mrun.config
138	fimm=false
139	host=all
140	host_found=false
141	locat=normal
142	makefile=""
143	module_calls=""
144	util_compiled_localhost=false
145	scirocco=false
146	silent=false
147	suf=f90
148	update=false
149	working_directory=`pwd`
150
151	typeset -i ih ihost=0
152
153	typeset -R30 calltime
154	typeset -L20 column1
155	typeset -L50 column2
156	typeset -L70 column3
157	typeset -L40 version="MBUILD 2.1 Rev$Rev: 818 $"
158
159	# ERROR HANDLING
160	# IN CASE OF EXIT:
161	trap 'rm -rf $working_directory/tmp_mbuild
162	if [[ $locat != normal ]]
163	then
164	printf "\n\n +++ mbuild killed \n\n"
165	else
166	printf "\n\n *** mbuild finished \n\n"
167	fi' exit
168
169
170	# IN CASE OF TERMINAL-BREAK:
171	trap 'rm -rf $working_directory/tmp_mbuild
172	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
173	exit
174	' 2
175
176
177	tmp_mbuild=${working_directory}/tmp_mbuild
178
179	# READ SHELLSCRIPT-OPTIONS
180	while getopts :c:h:m:s:u option
181	do
182	case $option in
183	(c) config_file=$OPTARG;;
184	(h) host=$OPTARG;;
185	(m) makefile=$OPTARG;;
186	(s) suf=$OPTARG;;
187	(u) compile_utility_programs=true;;
188	(\?) printf "\n +++ unknown option $OPTARG \n";
189	locat=parameter; exit;;
190	esac
191	done
192
193
194
195	# CHECK, IF CONFIGURATION-FILE EXISTS
196	if [[ ! -f $config_file ]]
197	then
198	printf "\n +++ configuration file: "
199	printf "\n $config_file"
200	printf "\n does not exist"
201	locat=configuration; exit
202	fi
203
204
205
206	# DETERMINE THE LOCAL HOST
207	local_host_real_name=$(hostname)
208	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
209
210
211
212	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
213	line=""
214	grep "%host_identifier" $config_file > $tmp_mbuild
215	while read line
216	do
217	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
218	then
219	HOSTNAME=`echo $line \| cut -d" " -s -f2`
220	host_identifier=`echo $line \| cut -d" " -s -f3`
221	if [[ $local_host_real_name = $HOSTNAME ]]
222	then
223	local_host=$host_identifier
224	break
225	fi
226	fi
227	done < $tmp_mbuild
228
229	if [[ "$local_host" = "" ]]
230	then
231	printf "\n +++ no host identifier found in configuration file \"$config_file\""
232	printf "\n for local host \"$local_host_real_name\"."
233	printf "\n Please add line"
234	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
235	printf "\n to the configuration file."
236	locat=local_host; exit
237	fi
238
239
240
241	[[ $local_host_real_name = scirocco ]] && scirocco=true
242	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
243
244
245
246	if [[ $local_host != ibms ]]
247	then
248	config_file=$PWD/$config_file
249	else
250	config_file=`pwd`/$config_file
251	fi
252
253
254
255	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
256	line=""
257	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
258	while read line
259	do
260	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
261	then
262	local_username=`echo $line \| cut -d" " -s -f2`
263	fi
264	done < $tmp_mbuild
265
266
267	if [[ "$local_username" = "" ]]
268	then
269	printf "\n +++ no user name found in configuration file"
270	printf "\n for local host \"$local_host\" "
271	locat=config_file; exit
272	fi
273
274
275	# DETERMINE LOCAL SOURCE-CODE PATH.
276	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
277	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
278	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
279	line=""
280	grep "%" $config_file > $tmp_mbuild
281	while read line
282	do
283	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
284	then
285	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
286	value=`echo $line \| cut -d" " -s -f2`
287	eval export $var=\$value
288	fi
289	done < $tmp_mbuild
290
291	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
292	line=""
293	grep "%source_path" $config_file > $tmp_mbuild
294	while read line
295	do
296	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
297	then
298	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
299	then
300	global_source_path=`echo $line \| cut -d" " -s -f2`
301	fi
302	fi
303	done < $tmp_mbuild
304
305	line=""
306	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
307	while read line
308	do
309	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
310	then
311	local_source_path=`echo $line \| cut -d" " -s -f2`
312	fi
313	done < $tmp_mbuild
314
315	if [[ "$local_source_path" = "" ]]
316	then
317	if [[ "$global_source_path" != "" ]]
318	then
319	local_source_path=$global_source_path
320	else
321	printf "\n +++ no source path found in configuration file"
322	printf "\n for local host \"$local_host\" "
323	printf "\n please set \"\%source_path\" in configuration file"
324	locat=config_file; exit
325	fi
326	fi
327	eval local_source_path=$local_source_path
328	eval local_source_path=$local_source_path
329
330
331
332	# DETERMINE GLOBAL DEPOSITORY-PATH
333	line=""
334	grep "%depository_path" $config_file > $tmp_mbuild
335	while read line
336	do
337	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
338	then
339	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
340	then
341	global_depository_path=`echo $line \| cut -d" " -s -f2`
342	fi
343	fi
344	done < $tmp_mbuild
345
346	if [[ $found = false ]]
347	then
348	printf "\n +++ no \%depository_path found in"
349	printf "\n $config_file"
350	locat=depository_path; exit
351	fi
352
353	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
354	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
355	then
356	printf "\n +++ no main program or more than one main program defined"
357	printf "\n in configuration file"
358	locat=configuration; exit
359	else
360	line=`grep "%mainprog" $config_file`
361	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
362	then
363	printf "\n +++ no main program defined in configuration file"
364	locat=configuration; exit
365	fi
366	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
367	fi
368
369
370
371	# CHECK IF MAKEFILE EXITS
372	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
373	if [[ ! -f $makefile ]]
374	then
375	printf "\n +++ makefile: "
376	printf "\n $makefile"
377	printf "\n does not exist"
378	locat=makefile; exit
379	fi
380
381
382	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
383	calltime=$(date)
384	printf "\n"
385	printf "#------------------------------------------------------------------------# \n"
386	printf "\| $version$calltime \| \n"
387	printf "\| \| \n"
388	column1="called on:"; column2=$local_host_real_name
389	printf "\| $column1$column2 \| \n"
390	column1="local username:"; column2=$local_username
391	printf "\| $column1$column2 \| \n"
392	column1="local IP-addres:"; column2=$local_addres
393	printf "\| $column1$column2 \| \n"
394	column1="config file:"; column2=$config_file
395	printf "\| $column1$column2 \| \n"
396	column1="makefile:"; column2=$makefile
397	printf "\| $column1$column2 \| \n"
398	column1="local source path:"; column2=$local_source_path
399	printf "\| $column1$column2 \| \n"
400	printf "#------------------------------------------------------------------------# \n"
401
402	# printf "\| \| \n"
403
404
405	if [[ $compile_utility_programs = false ]]
406	then
407
408	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
409	# WITH OVERWRITING FILES ON THE REMOTE HOST
410	cd $local_source_path
411	printf "\n\n *** tar of makefile and source files in $local_source_path"
412	tar -cf ${mainprog}_sources.tar Makefile *.$suf
413	printf "\n"
414
415	else
416	cd $local_source_path
417	printf "\n\n *** tar of makefile and source files in $local_source_path"
418
419	cat Makefile_check\|while read line
420	do
421	line=$(echo $line\|grep RCS)
422	if [[ $line == "RCS" ]]
423	then
424	line=$(echo $line\|sed 's/RCS = //g')
425	break
426	fi
427	done
428
429	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
430	printf "\n"
431	fi
432
433
434
435	# GET CONFIRMATION TO CONTINUE
436	if [[ $host = all ]]
437	then
438	printf "\n *** updates will be made for ALL hosts found in"
439	printf "\n the configuration file"
440	else
441	printf "\n *** update will be made for host \"$host\" "
442	fi
443
444	if [[ $silent = false ]]
445	then
446	answer=dummy
447	printf "\n\n"
448	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
449	do
450	printf " >>> continue (y/n) ? "
451	read answer
452	done
453	if [[ $answer = n \|\| $answer = N ]]
454	then
455	locat=user_abort; exit
456	fi
457	fi
458
459
460
461
462	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
463	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
464	printf "\n *** scanning configuration file for host(s) ..."
465
466	grep %fopts $config_file > $tmp_mbuild
467	while read line
468	do
469	# KOMMENTARZEILEN UEBERSPRINGEN
470	[[ $(echo $line \| cut -c1) = "#" ]] && continue
471	(( ihost = ihost + 1 ))
472	hostline[$ihost]="$line"
473	done < $tmp_mbuild
474
475
476	while (( ih < ihost ))
477	do
478
479	(( ih = ih + 1 ))
480
481	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
482	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
483	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
484	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
485	remote_host=`echo $remote_host_string \| cut -d" " -f1`
486	if [[ $host != all ]]
487	then
488	[[ $remote_host != $host ]] && continue
489	fi
490	host_found=true
491	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
492	if [[ $condition1 = $remote_host ]]
493	then
494	condition1=""
495	else
496	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
497	fi
498
499	modules=""
500	netcdf_inc=""
501	netcdf_lib=""
502	make_options=""
503
504	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
505	case $remote_host in
506	(lckordi) remote_adress=210.219.61.8;;
507	(lcmuk) remote_addres=130.75.105.2;;
508	(lcrte) remote_addres=133.5.185.60;;
509	(lcsgib) remote_addres=130.73.232.102;;
510	(lcsgih) remote_addres=130.75.4.101;;
511	(lck) remote_addres=165.132.26.61;;
512	(lctit) remote_addres=10.1.6.170;;
513	(lcxt4) remote_addres=129.177.20.113;;
514	(lcxt5m) remote_addres=193.166.211.144;;
515	(decalpha) remote_addres=165.132.26.56;;
516	(ibmh) remote_addres=136.172.40.15;;
517	(ibmkisti) remote_addres=150.183.146.24;;
518	(ibmku) remote_addres=133.5.4.129;;
519	(ibms) remote_addres=150.183.5.101;;
520	(ibmy) remote_addres=165.132.26.58;;
521	(nech) remote_addres=136.172.44.192;;
522	(neck) remote_addres=133.5.178.11;;
523	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
524	(*) if [[ $local_host != $remote_host ]]
525	then
526	printf "\n +++ remote host \"$remote_host\" unknown";
527	printf "\n please inform PALM group support!"
528	fi;;
529	esac
530
531
532	# REMOTE-USERNAMEN ERMITTELN
533	line=""
534	found=false
535	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
536	while read line1
537	do
538
539	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
540	then
541	line="$line1"
542	fi
543
544	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
545	then
546	remote_username=`echo $line \| cut -d" " -s -f2`
547	found=true
548	fi
549
550	done < $tmp_mbuild
551
552	if [[ $found = false ]]
553	then
554	printf "\n +++ no remote username found in configuration file"
555	printf "\n for \"$remote_host_string\" "
556	locat=config_file; exit
557	fi
558
559
560	# REMOTE-QUELLTEXTPFAD ERMITTELN
561	line=""
562	remote_source_path=""
563	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
564	while read line1
565	do
566
567	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
568	then
569	line="$line1"
570	fi
571
572	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
573	then
574	remote_source_path=`echo $line \| cut -d" " -s -f2`
575	fi
576
577	done < $tmp_mbuild
578
579	if [[ "$remote_source_path" = "" ]]
580	then
581	if [[ "$global_source_path" != "" ]]
582	then
583	remote_source_path=$global_source_path
584	else
585	printf "\n +++ no source path found in configuration file"
586	printf "\n for \"$remote_host_string\" "
587	locat=config_file; exit
588	fi
589	fi
590
591	remote_ud=${remote_source_path}/../UTIL
592	remote_ud=$(eval echo $remote_ud)
593
594
595	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
596	remote_md=""
597	line=""
598	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
599	while read line1
600	do
601
602	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
603	then
604	line="$line1"
605	fi
606
607	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
608	then
609	remote_md=`echo $line \| cut -d" " -s -f2`
610	fi
611
612	done < $tmp_mbuild
613
614	if [[ "$remote_md" = "" ]]
615	then
616	if [[ "$global_depository_path" != "" ]]
617	then
618	remote_md=$global_depository_path
619	else
620	printf "\n +++ no depository path found in configuration file"
621	printf "\n for \"$remote_host_string\" "
622	printf "\n please set \"\%depository_path\" in configuration file"
623	locat=config_file; exit
624	fi
625	fi
626
627	remote_md=$(eval echo $remote_md)
628	block=""
629	[[ "$condition1" != "" ]] && block=_$condition1
630	[[ "$condition2" != "" ]] && block=${block}_$condition2
631	remote_md=${remote_md}$block
632
633
634	# COMPILERNAMEN ERMITTELN
635	line=""
636	found=false
637	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
638	while read line1
639	do
640
641	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
642	then
643	line="$line1"
644	fi
645
646	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
647	then
648	compiler_name=`echo $line \| cut -d" " -s -f2`
649	found=true
650	fi
651
652	done < $tmp_mbuild
653
654	if [[ $found = false ]]
655	then
656	printf "\n +++ no compiler name found in configuration file"
657	printf "\n for \"$remote_host_string\" "
658	locat=config_file; exit
659	fi
660
661
662	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
663	# SERIELLER COMPILERNAME ERMITTELT WERDEN
664	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
665	then
666	line=""
667	found=false
668	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
669	while read line1
670	do
671
672	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
673	then
674	line="$line1"
675	fi
676
677	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
678	then
679	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
680	found=true
681	fi
682
683	done < $tmp_mbuild
684
685	if [[ $found = false ]]
686	then
687	printf "\n +++ no serial compiler name found in configuration file"
688	printf "\n for \"$remote_host_string\" "
689	locat=config_file; exit
690	fi
691	else
692	compiler_name_ser=$compiler_name
693	fi
694
695
696
697	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
698	line=""
699	found=false
700	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
701	while read line1
702	do
703
704	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
705	then
706	line="$line1"
707	fi
708
709	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
710	then
711	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
712	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
713	found=true
714	fi
715
716	done < $tmp_mbuild
717
718	if [[ $found = false ]]
719	then
720	printf "\n +++ no preprocessor options found in configuration file"
721	printf "\n for \"$remote_host_string\" "
722	locat=config_file; exit
723	fi
724
725
726	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
727	for string in $remote_host_string
728	do
729	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
730	then
731	cpp_options="$cpp_options -D__lc "
732	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
733	then
734	cpp_options="${cpp_options},-D__ibm"
735	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
736	then
737	cpp_options="${cpp_options} -D__nec"
738	else
739	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
740	then
741	cpp_options="${cpp_options},-D__$string"
742	else
743	cpp_options="$cpp_options -D__$string "
744	fi
745	fi
746	done
747
748
749
750	# NETCDF-OPTIONEN ERMITTELN
751	line=""
752	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
753	while read line1
754	do
755
756	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
757	then
758	line="$line1"
759	fi
760
761	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
762	then
763	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
764	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
765	fi
766
767	done < $tmp_mbuild
768
769	line=""
770	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
771	while read line1
772	do
773
774	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
775	then
776	line="$line1"
777	fi
778
779	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
780	then
781	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
782	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
783	fi
784
785	done < $tmp_mbuild
786
787
788
789	# get make options
790	line=""
791	found=false
792	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
793	while read line1
794	do
795
796	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
797	then
798	line="$line1"
799	fi
800
801	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
802	then
803	# remove colons from directive string
804	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
805
806	fi
807
808	done < $tmp_mbuild
809
810
811
812	# COMPILEROPTIONEN ERMITTELN
813	line=""
814	found=false
815	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
816	while read line1
817	do
818
819	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
820	then
821	line="$line1"
822	fi
823
824	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
825	then
826	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
827	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
828	found=true
829
830	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
831	compiler_options="$compiler_options $netcdf_inc"
832	fi
833
834	done < $tmp_mbuild
835
836	if [[ $found = false ]]
837	then
838	printf "\n +++ no compiler options found in configuration file"
839	printf "\n for \"$remote_host_string\" "
840	locat=config_file; exit
841	fi
842
843
844
845	# get modules to be loaded
846	line=""
847	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
848	while read line1
849	do
850
851	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
852	then
853	line="$line1"
854	fi
855
856	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
857	then
858	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
859	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
860	fi
861
862	done < $tmp_mbuild
863
864
865
866
867	# LADER-OPTIONEN ERMITTELN
868	line=""
869	found=false
870	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
871	while read line1
872	do
873
874	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
875	then
876	line="$line1"
877	fi
878
879	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
880	then
881	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
882	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
883	found=true
884
885	# NETCDF-LIBRARY HINZUFUEGEN
886	loader_options="$loader_options $netcdf_lib"
887	fi
888
889	done < $tmp_mbuild
890
891	if [[ $found = false ]]
892	then
893	printf "\n +++ no loader options found in configuration file"
894	printf "\n for \"$remote_host_string\" "
895	locat=config_file; exit
896	fi
897
898
899	printf "\n\n#------------------------------------------------------------------------# \n"
900	if [[ $remote_host = $local_host ]]
901	then
902	column1="remote_host:"; column2="$remote_host (= local host!)"
903	else
904	column1="remote_host:"; column2=$remote_host
905	fi
906	printf "\| $column1$column2 \| \n"
907	printf "\| \| \n"
908	column1="conditions:"; column2="$condition1 $condition2"
909	printf "\| $column1$column2 \| \n"
910	column1="make depository:"; column2=$remote_md
911	printf "\| $column1$column2 \| \n"
912	line=$(echo "$remote_md" \| cut -c51-)
913	while [[ "$line" != "" ]]
914	do
915	column1=""
916	column2=$line
917	printf "\| $column1$column2 \| \n"
918	line=$(echo "$line" \| cut -c51-)
919	done
920	if [[ $compile_utility_programs = true ]]
921	then
922	column1="utility directory:"; column2=$remote_ud
923	printf "\| $column1$column2 \| \n"
924	fi
925	column1="username:"; column2=$remote_username
926	printf "\| $column1$column2 \| \n"
927	column1="addres:"; column2=$remote_addres
928	printf "\| $column1$column2 \| \n"
929	column1="compiler:"; column2=$compiler_name
930	printf "\| $column1$column2 \| \n"
931	if [[ $compile_utility_programs = true ]]
932	then
933	column1="serial compiler:"; column2=$compiler_name_ser
934	printf "\| $column1$column2 \| \n"
935	fi
936	if [[ "$make_options" != "" ]]
937	then
938	column1="make options:"; column2=$make_options
939	printf "\| $column1$column2 \| \n"
940	fi
941	column1="cpp options:"; column2=$cpp_options
942	printf "\| $column1$column2 \| \n"
943	line=$(echo "$cpp_options" \| cut -c51-)
944	while [[ "$line" != "" ]]
945	do
946	column1=""
947	column2=$line
948	printf "\| $column1$column2 \| \n"
949	line=$(echo "$line" \| cut -c51-)
950	done
951	column1="compiler options:"; column2=$compiler_options
952	printf "\| $column1$column2 \| \n"
953	line=$(echo "$compiler_options" \| cut -c51-)
954	while [[ "$line" != "" ]]
955	do
956	column1=""
957	column2=$line
958	printf "\| $column1$column2 \| \n"
959	line=$(echo "$line" \| cut -c51-)
960	done
961	column1="loader options:"; column2=$loader_options
962	printf "\| $column1$column2 \| \n"
963	line=$(echo "$loader_options" \| cut -c51-)
964	while [[ "$line" != "" ]]
965	do
966	column1=""
967	column2=$line
968	printf "\| $column1$column2 \| \n"
969	line=$(echo "$line" \| cut -c51-)
970	done
971	if [[ $modules != "" ]]
972	then
973	column1="modules to be load:"; column2=$modules
974	printf "\| $column1$column2 \| \n"
975	line=$(echo "$modules" \| cut -c51-)
976	while [[ "$line" != "" ]]
977	do
978	column1=""
979	column2=$line
980	printf "\| $column1$column2 \| \n"
981	line=$(echo "$line" \| cut -c51-)
982	done
983	fi
984	printf "#------------------------------------------------------------------------# \n"
985
986	if [[ $silent = false ]]
987	then
988	answer=dummy
989	printf "\n\n"
990	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
991	do
992	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
993	read answer
994	done
995	if [[ $answer = a \|\| $answer = A ]]
996	then
997	locat=user_abort; exit
998	fi
999	if [[ $answer = c \|\| $answer = C ]]
1000	then
1001	silent=true
1002	fi
1003	if [[ $answer = s \|\| $answer = S ]]
1004	then
1005	continue
1006	fi
1007	fi
1008
1009
1010	# make on remote host
1011	if [[ $remote_host != $local_host ]]
1012	then
1013
1014	if [[ $compile_utility_programs = false ]]
1015	then
1016
1017	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1018	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1019	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1020	if [[ $remote_host != lctit ]]
1021	then
1022	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1023	else
1024	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1025	# MIT SSH, DESHALB AUFRUF PER PIPE
1026	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1027	fi
1028	if [[ $local_host = decalpha ]]
1029	then
1030	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1031	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1032	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1033	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1034	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1035	else
1036	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1037	fi
1038
1039
1040
1041	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1042	echo " *** untar previous update on remote host, if existing"
1043	if [[ $remote_host != lctit ]]
1044	then
1045	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1046	else
1047	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1048	# MIT SSH, DESHALB AUFRUF PER PIPE
1049	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1050	fi
1051
1052
1053	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1054	echo " *** untar actual sources on remote host"
1055	if [[ $remote_host != lctit ]]
1056	then
1057	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1058	else
1059	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1060	# MIT SSH, DESHALB AUFRUF PER PIPE
1061	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1062	fi
1063
1064
1065	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1066	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1067	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1068	# Z.B. DIE PFADE ZUM COMPILER)
1069	echo " *** execute \"make\" on remote host"
1070
1071
1072	# generate make call with make options
1073	if [[ $remote_host = nech ]]
1074	then
1075	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1076	else
1077	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1078	fi
1079
1080	# generate command to load modules, if modules are given
1081	if [[ "$modules" != "" ]]
1082	then
1083	if [[ $remote_host = lctit ]]
1084	then
1085	module_calls=". $modules"
1086	else
1087	module_calls="module load ${modules};"
1088	fi
1089
1090	# bugfix for wrong netcdf module
1091	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1092	then
1093	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1094	then
1095	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1096	fi
1097	fi
1098	else
1099	module_calls=""
1100	fi
1101
1102	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1103	then
1104
1105	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1106
1107	elif [[ $remote_host = ibmh ]]
1108	then
1109
1110	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1111
1112	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1113	then
1114
1115	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1116	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1117
1118	elif [[ $remote_host = lctit ]]
1119	then
1120
1121	echo " " > ${remote_host}_last_make_protokoll
1122	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1123	do
1124	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1125	done
1126
1127	elif [[ $remote_host = lcxt4 ]]
1128	then
1129
1130	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1131
1132	else
1133
1134	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1135
1136	fi
1137
1138	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1139	then
1140	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1141	if [[ $silent = false ]]
1142	then
1143	answer=dummy
1144	printf "\n"
1145	while [[ "$answer" != c && "$answer" != k ]]
1146	do
1147	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1148	read answer
1149	if [[ "$answer" = l ]]
1150	then
1151	more ${remote_host}_last_make_protokoll
1152	fi
1153	done
1154	if [[ $answer = k ]]
1155	then
1156	locat=user_abort; exit
1157	fi
1158	fi
1159	fi
1160
1161
1162
1163	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1164	printf "\n *** tar update on remote host ..."
1165	if [[ $remote_host != lctit ]]
1166	then
1167	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1168	else
1169	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1170	# MIT SSH, DESHALB AUFRUF PER PIPE
1171	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1172	fi
1173
1174
1175	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1176	# printf "\n *** \"make clean\" on remote host ..."
1177	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1178	# printf "\n"
1179
1180
1181
1182
1183	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1184	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1185	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1186	elif [[ $compile_utility_programs = true ]]
1187	then
1188
1189	printf "\n\n"
1190	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1191	cd ${local_source_path}/../SCRIPTS
1192
1193	if [[ $remote_host != lctit ]]
1194	then
1195	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1196	else
1197	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1198	# MIT SSH, DESHALB AUFRUF PER PIPE
1199	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1200	fi
1201
1202	# KOPIEREN DER SCRIPTE
1203	if [[ $local_host = decalpha ]]
1204	then
1205	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1206	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1207	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1208	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1209	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1210	else
1211	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1212	fi
1213
1214	cd - > /dev/null
1215	cd ${local_source_path}/../UTIL
1216
1217
1218	# KOPIEREN DER UTILITY-PROGRAMME
1219	if [[ $local_host = decalpha ]]
1220	then
1221	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1222	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1223	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1224	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1225	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1226	else
1227	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1228	fi
1229
1230
1231
1232	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1233	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1234	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1235	# Z.B. DIE PFADE ZUM COMPILER)
1236	echo " *** execute \"make\" on remote host"
1237
1238	if [[ $remote_host = nech ]]
1239	then
1240	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1241	else
1242	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1243	fi
1244
1245	# generate command to load modules, if modules are given
1246	if [[ "$modules" != "" ]]
1247	then
1248	if [[ $remote_host = lctit ]]
1249	then
1250	module_calls=". $modules"
1251	else
1252	module_calls="module load ${modules};"
1253	fi
1254
1255	# bugfix for wrong netcdf module
1256	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1257	then
1258	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1259	then
1260	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1261	fi
1262	fi
1263	else
1264	module_calls=""
1265	fi
1266
1267	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1268	then
1269
1270	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1271
1272	elif [[ $remote_host = ibmh ]]
1273	then
1274
1275	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1276
1277	elif [[ $remote_host = lctit ]]
1278	then
1279
1280	echo " " > ${remote_host}_last_make_protokoll
1281	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1282	do
1283	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1284	done
1285
1286	elif [[ $remote_host = lcxt4 ]]
1287	then
1288
1289	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1290
1291	else
1292
1293	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1294
1295	fi
1296
1297	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1298
1299	rm -rf ${remote_host}_last_make_protokoll
1300
1301	# make on local host
1302	else
1303
1304	# workaround for lcxt4
1305	if [[ $remote_host = lcxt4 ]]
1306	then
1307	. /opt/modules/default/init/ksh
1308	fi
1309
1310	# first load modules, if given
1311	if [[ "$modules" != "" ]]
1312	then
1313	if [[ $remote_host = lctit ]]
1314	then
1315	. $modules
1316	else
1317	module load ${modules}
1318	fi
1319	fi
1320
1321
1322	if [[ $compile_utility_programs = false ]]
1323	then
1324
1325	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1326	eval remote_md=$remote_md
1327	if [[ ! -d $remote_md ]]
1328	then
1329	if mkdir $remote_md
1330	then
1331	printf "\n\n *** directory for make depository:"
1332	printf "\n $remote_md"
1333	printf "\n was created\n"
1334	else
1335	printf "\n +++ directory for make depository:"
1336	printf "\n $remote_md"
1337	printf "\n cannot be created"
1338	locat=local_depository_path; exit
1339	fi
1340	fi
1341
1342	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1343	echo " "
1344	echo " *** updating sources in $remote_md"
1345	cd $remote_md
1346	cp $local_source_path/${mainprog}_sources.tar .
1347	tar xf ${mainprog}_sources.tar
1348
1349	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1350	echo " "
1351	echo " *** execute \"make\" on local host"
1352
1353	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1354
1355	if [[ $? != 0 ]]
1356	then
1357	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1358	if [[ $silent = false ]]
1359	then
1360	answer=dummy
1361	printf "\n"
1362	while [[ "$answer" != c && "$answer" != k ]]
1363	do
1364	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1365	read answer
1366	if [[ "$answer" = l ]]
1367	then
1368	more ${remote_host}_last_make_protokoll
1369	fi
1370	done
1371	if [[ $answer = k ]]
1372	then
1373	locat=user_abort; exit
1374	fi
1375	fi
1376	fi
1377
1378
1379	# TAR NEW VERSION ON LOCAL HOST
1380	printf "\n *** tar update on local host ..."
1381	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1382
1383
1384	# COMPILE THE UTILITY PROGRAMS
1385	elif [[ $compile_utility_programs = true ]]
1386	then
1387	printf "\n\n"
1388	echo " *** compiling the utility programs ..."
1389	cd ${local_source_path}/../UTIL
1390
1391	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1392	touch *.f90
1393	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1394
1395	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1396	if [[ $util_compiled_localhost == false ]]
1397	then
1398	printf "\n\n"
1399	echo " *** compiling the mrun GUI"
1400	if which qmake >/dev/null; then
1401	cd mrungui
1402	touch *
1403	qmake
1404	make
1405	make clean
1406	rm Makefile
1407	cd ..
1408	else
1409	echo " +++ no qmake found. The (optional) GUI will not be compiled."
1410	fi
1411
1412	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
1413
1414	printf "\n\n"
1415	echo " *** compiling check_namelist_files ..."
1416
1417	check_depository_path=${local_source_path}/../UTIL
1418	cd $check_depository_path
1419	mkdir check_tmp
1420	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1421	cd check_tmp
1422	tar -xf ${mainprog}_sources_check.tar
1423	rm -rf ${mainprog}_sources_check.tar
1424
1425	copts_check="-cpp -D__parallel -D__check"
1426	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check"
1427
1428	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
1429	mv check_namelist_files.tar $check_depository_path
1430	mv check_namelist_files.x $PALM_BIN
1431	cd $check_depository_path
1432	rm -rf check_tmp
1433	util_compiled_localhost=true
1434	else
1435	cd $check_depository_path
1436	printf "\n\n"
1437	echo " *** skipped compilation of mrun GUI."
1438	printf "\n\n"
1439	echo " *** skipped compilation of check_namelist_files."
1440	fi
1441
1442	fi
1443	fi
1444	done
1445
1446
1447	if [[ $host_found = false ]]
1448	then
1449	if [[ $host = all ]]
1450	then
1451	printf "\n +++ no hosts found in configuration file"
1452	else
1453	printf "\n +++ host \"$host\" not found in configuration file"
1454	fi
1455	locat=config_file; exit
1456	fi
1457
1458
1459
1460	# FINAL WORK
1461	rm -f hosts_found_in_config_file
1462	rm -f ${local_source_path}/${mainprog}_sources_check.tar
1463

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |