Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 81

Last change on this file since 81 was 75, checked in by raasch, 18 years ago
preliminary update for changes concerning non-cyclic boundary conditions
Property svn:keywords set to `Rev`
File size: 55.6 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 54 2007-03-08 00:00:02Z raasch $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89
90
91
92	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
93	compile_utility_programs=false
94	config_file=.mrun.config
95	fimm=false
96	host=all
97	host_found=false
98	ibm_hb_done=false
99	lcmuk_done=false
100	locat=normal
101	makefile=""
102	remote_mode=interactive
103	scirocco=false
104	silent=false
105	suf=f90
106	update=false
107
108	typeset -i ih ihost=0
109
110	typeset -R30 calltime
111	typeset -L20 column1
112	typeset -L50 column2
113	typeset -L70 column3
114	typeset -L40 version="MBUILD 2.0 Rev$Rev: 75 $"
115
116	# FEHLERBEHANDLUNG
117	# BEI EXIT:
118	trap 'rm -rf tmp_mbuild
119	if [[ $locat != normal ]]
120	then
121	printf "\n\n +++ mbuild killed \n\n"
122	else
123	printf "\n\n *** mbuild finished \n\n"
124	fi' exit
125
126
127	# BEI TERMINAL-BREAK:
128	trap 'rm -rf tmp_mbuild
129	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
130	exit
131	' 2
132
133
134
135	# SHELLSCRIPT-OPTIONEN EINLESEN
136	while getopts :c:h:m:rs:u option
137	do
138	case $option in
139	(c) config_file=$OPTARG;;
140	(h) host=$OPTARG;;
141	(m) makefile=$OPTARG;;
142	(r) remote_mode=batch;;
143	(s) suf=$OPTARG;;
144	(u) compile_utility_programs=true;;
145	(\?) printf "\n +++ unknown option $OPTARG \n";
146	locat=parameter; exit;;
147	esac
148	done
149
150
151
152	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
153	if [[ $remote_mode = batch ]]
154	then
155	printf "\n +++ sorry, batch mode does not work! \n"
156	locat=parameter; exit
157	fi
158
159
160
161	# LOKALEN RECHNER ERMITTELN
162	local_host_real_name=$(hostname)
163	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
164
165	case $local_host_real_name in
166	(atmos) local_host=lcide;;
167	(berte) local_host=t3eb;;
168	(bora\|breva\|gregale\|irifi\|levanto\|maestro\|orkan\|ostria\|quanero\|scirocco) local_host=lcmuk;;
169	(fimm.bccs.uib.no) local_host=lcmuk;;
170	(gate) local_host=neck;;
171	(gfdl3.yonsei.ac.kr) local_host=decalpha;;
172	(gfdl5) local_host=ibmy;;
173	(gwdk081.gwdg.de) local_host=ibm;;
174	(hreg01a-en0\|hreg02a-en0) local_host=ibmh;;
175	(nobel\|nobela) local_host=ibms;;
176	(tgg*) local_host=lctit;;
177	(t3e) local_host=t3eh;;
178	(zam003) local_host=t3ej2;;
179	(zam005) local_host=t3ej5;;
180	(*) printf "\n +++ local host \"$local_host_real_name\" not admitted for mbuild \n"
181	locat=local_host; exit;;
182	esac
183
184	[[ $local_host_real_name = scirocco ]] && scirocco=true
185	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
186
187
188
189	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
190	if [[ ! -f $config_file ]]
191	then
192	printf "\n +++ configuration file: "
193	printf "\n $config_file"
194	printf "\n does not exist"
195	locat=configuration; exit
196	fi
197	if [[ $local_host != ibms ]]
198	then
199	config_file=$PWD/$config_file
200	else
201	config_file=`pwd`/$config_file
202	fi
203
204
205
206	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
207	line=""
208	grep " $local_host" $config_file \| grep "%remote_username" > tmp_mbuild
209	while read line
210	do
211	if [[ "$line" != "" \|\| $(echo $line \| cut -c1) != "#" ]]
212	then
213	local_username=`echo $line \| cut -d" " -s -f2`
214	fi
215	done < tmp_mbuild
216
217	if [[ "$local_username" = "" ]]
218	then
219	printf "\n +++ no user name found in configuration file"
220	printf "\n for local host \"$local_host\" "
221	locat=config_file; exit
222	fi
223
224
225	# LOKALEN QUELLTEXTPFAD ERMITTELN.
226	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
227	# VEREINBART WURDE.
228	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
229	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
230	line=""
231	grep "%" $config_file > tmp_mbuild
232	while read line
233	do
234	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" ]]
235	then
236	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
237	value=`echo $line \| cut -d" " -s -f2`
238	eval export $var=\$value
239	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
240	fi
241	done < tmp_mbuild
242
243	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
244	line=""
245	grep "%source_path" $config_file > tmp_mbuild
246	while read line
247	do
248	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
249	then
250	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
251	then
252	global_source_path=`echo $line \| cut -d" " -s -f2`
253	fi
254	fi
255	done < tmp_mbuild
256
257	line=""
258	grep " $local_host" $config_file \| grep "%source_path" > tmp_mbuild
259	while read line
260	do
261	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
262	then
263	local_source_path=`echo $line \| cut -d" " -s -f2`
264	fi
265	done < tmp_mbuild
266
267	if [[ "$local_source_path" = "" ]]
268	then
269	if [[ "$global_source_path" != "" ]]
270	then
271	local_source_path=$global_source_path
272	else
273	printf "\n +++ no source path found in configuration file"
274	printf "\n for local host \"$local_host\" "
275	printf "\n please set \"\%source_path\" in configuration file"
276	locat=config_file; exit
277	fi
278	fi
279	eval local_source_path=$local_source_path
280	eval local_source_path=$local_source_path
281
282
283	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
284	line=""
285	grep "%depository_path" $config_file > tmp_mbuild
286	while read line
287	do
288	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
289	then
290	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
291	then
292	global_depository_path=`echo $line \| cut -d" " -s -f2`
293	fi
294	fi
295	done < tmp_mbuild
296
297	line=""
298	grep " $local_host" $config_file \| grep "%depository_path" > tmp_mbuild
299	while read line
300	do
301	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
302	then
303	local_depository_path=`echo $line \| cut -d" " -s -f2`
304	fi
305	done < tmp_mbuild
306
307	if [[ "$local_depository_path" = "" ]]
308	then
309	if [[ "$global_depository_path" != "" ]]
310	then
311	local_depository_path=$global_depository_path
312	else
313	printf "\n +++ no depository path found in configuration file"
314	printf "\n for local host \"$local_host\" "
315	printf "\n please set \"\%depository_path\" in configuration file"
316	locat=config_file; exit
317	fi
318	fi
319	eval local_depository_path=$local_depository_path
320	eval local_depository_path=$local_depository_path
321
322
323
324	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
325	# VEREINBART WURDE
326	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
327	then
328	printf "\n +++ no main program or more than one main program defined"
329	printf "\n in configuration file"
330	locat=configuration; exit
331	else
332	line=`grep "%mainprog" $config_file`
333	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
334	then
335	printf "\n +++ no main program defined in configuration file"
336	locat=configuration; exit
337	fi
338	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
339	fi
340
341
342
343	# MAKEFILE vorhanden
344	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
345	if [[ ! -f $makefile ]]
346	then
347	printf "\n +++ makefile: "
348	printf "\n $makefile"
349	printf "\n does not exist"
350	locat=makefile; exit
351	fi
352
353
354	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
355	calltime=$(date)
356	printf "\n"
357	printf "#------------------------------------------------------------------------# \n"
358	printf "\| $version$calltime \| \n"
359	printf "\| \| \n"
360	column1="called on:"; column2=$local_host_real_name
361	printf "\| $column1$column2 \| \n"
362	column1="local username:"; column2=$local_username
363	printf "\| $column1$column2 \| \n"
364	column1="local IP-addres:"; column2=$local_addres
365	printf "\| $column1$column2 \| \n"
366	column1="config file:"; column2=$config_file
367	printf "\| $column1$column2 \| \n"
368	column1="makefile:"; column2=$makefile
369	printf "\| $column1$column2 \| \n"
370	column1="local source path:"; column2=$local_source_path
371	printf "\| $column1$column2 \| \n"
372	column1="make depository:"; column2=$local_depository_path
373	printf "\| $column1$column2 \| \n"
374	printf "#------------------------------------------------------------------------# \n"
375
376	# printf "\| \| \n"
377
378
379	if [[ $compile_utility_programs = false ]]
380	then
381
382	cd $local_source_path
383
384
385	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
386	source_code_files=`ls -1 *.$suf`
387
388
389
390	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
391	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
392	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
393	if [[ ! -d $local_depository_path ]]
394	then
395	if mkdir $local_depository_path
396	then
397	printf "\n\n *** directory for make depository:"
398	printf "\n $local_depository_path"
399	printf "\n was created\n"
400
401	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
402	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
403	printf "\n *** makefile and source code files are copied to"
404	printf "\n $local_depository_path\n"
405	printf "\n copying makefile \"$makefile\" ..."
406	cp -p $makefile $local_depository_path/Makefile
407
408	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
409	# SEIN
410	for filename in $source_code_files
411	do
412	if [[ $(grep -c $filename $makefile) = 0 ]]
413	then
414	printf "\n +++ source code file:"
415	printf "\n $filename"
416	printf "\n is not listed in makefile"
417	locat=makefile; exit
418	else
419	printf "\n copying source code file \"$filename\" ..."
420	cp -p $filename $local_depository_path
421	fi
422	done
423	printf "\n"
424	else
425	printf "\n +++ directory for make depository:"
426	printf "\n $local_depository_path"
427	printf "\n cannot be created"
428	locat=local_depository_path; exit
429	fi
430	else
431
432	printf "\n *** checking file status ..."
433
434	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
435	if [[ $makefile -nt $local_depository_path/Makefile ]]
436	then
437	printf "\n *** update of \"$makefile\" "
438	cp -f -p $makefile $local_depository_path/Makefile
439	update=true
440
441	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
442	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
443	cd $local_depository_path
444	source_code_files_in_depository=`ls -1 *.$suf`
445	for filename in $source_code_files_in_depository
446	do
447	if [[ $(grep -c $filename Makefile) = 0 ]]
448	then
449	printf "\n *** source code file in \"$local_depository_path\":"
450	printf "\n $filename"
451	printf "\n is not listed in makefile"
452	if [[ $silent = false ]]
453	then
454	answer=dummy
455	printf "\n\n"
456	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
457	do
458	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
459	read answer
460	done
461	if [[ $answer = y \|\| $answer = Y ]]
462	then
463	base=`echo $filename \| cut -d. -f2`
464	rm -f $filename
465	rm -f ${base}.o ${base}.mod
466	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
467	else
468	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
469	fi
470	fi
471	fi
472	done
473	cd - > /dev/null 2>&1
474
475	elif [[ $local_depository_path/Makefile -nt $makefile ]]
476	then
477	printf "\n *** makefile in depository is newer than"
478	printf "\n \"$makefile\" "
479	if [[ $silent = false ]]
480	then
481	answer=dummy
482	printf "\n\n"
483	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
484	do
485	printf " >>> update \"$makefile\" (y/n) ? "
486	read answer
487	done
488	if [[ $answer = y \|\| $answer = Y ]]
489	then
490	cp -f -p $local_depository_path/Makefile $makefile
491	printf "\n *** \"$makefile\" updated"
492	else
493	printf "\n *** \"$makefile\" not updated"
494	fi
495	fi
496	fi
497
498	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
499	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
500	for filename in $source_code_files
501	do
502	if [[ $(grep -c $filename $makefile) = 0 ]]
503	then
504	printf "\n +++ source code file:"
505	printf "\n $filename"
506	printf "\n is not listed in makefile"
507	locat=makefile; exit
508	else
509	if [[ ! -f $local_depository_path/$filename ]]
510	then
511	cp -p $filename $local_depository_path
512	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
513	fi
514	if [[ $filename -nt $local_depository_path/$filename ]]
515	then
516	printf "\n *** update of source code file \"$filename\" "
517	cp -f -p $filename $local_depository_path
518	update=true
519	fi
520	fi
521	done
522
523
524	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
525	# ODER EVTL. NEUEREN DATUMS SIND
526	cd $local_depository_path
527	source_code_files_in_depository=`ls -1 *.$suf`
528	cd - > /dev/null 2>&1
529	for filename in $source_code_files_in_depository
530	do
531	if [[ ! -f $filename ]]
532	then
533	printf "\n *** source code file \"$filename\" does not exist in current directory"
534	if [[ $silent = false ]]
535	then
536	answer=dummy
537	printf "\n\n"
538	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
539	do
540	printf " >>> create \"$filename\" in current directory (y/n) ? "
541	read answer
542	done
543	if [[ $answer = y \|\| $answer = Y ]]
544	then
545	cp -p $local_depository_path/$filename $filename
546	printf "\n *** source code file \"$filename\" created in current directory"
547	else
548	printf "\n *** source code file \"$filename\" not created in current directory"
549	fi
550	fi
551	elif [[ $local_depository_path/$filename -nt $filename ]]
552	then
553	ls -al $local_depository_path/$filename
554	ls -al $filename
555	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
556	if [[ $silent = false ]]
557	then
558	answer=dummy
559	printf "\n\n"
560	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
561	do
562	printf " >>> update \"$filename\" in current directory (y/n) ? "
563	read answer
564	done
565	if [[ $answer = y \|\| $answer = Y ]]
566	then
567	cp -f -p $local_depository_path/$filename $filename
568	printf "\n *** source code file \"$filename\" updated in current directory"
569	else
570	printf "\n *** source code file \"$filename\" not updated in current directory"
571	fi
572	fi
573	fi
574	done
575
576	if [[ $update = false ]]
577	then
578	printf "\n *** no updates necessary in \"$local_depository_path\" "
579	if [[ $silent = false ]]
580	then
581	answer=dummy
582	printf "\n\n"
583	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
584	do
585	printf " >>> continue with updates on remote hosts (y/n) ? "
586	read answer
587	done
588	if [[ $answer = n \|\| $answer = N ]]
589	then
590	locat=user_abort; exit
591	fi
592	fi
593	fi
594	fi
595
596
597
598	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
599	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
600	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
601	printf "\n\n *** tar of makefile and source files in depository ..."
602	cd $local_depository_path
603	chmod u+w Makefile *.$suf
604	tar -cf ${mainprog}_sources.tar Makefile *.$suf
605	printf "\n"
606
607	fi
608
609
610
611	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
612	if [[ $host = all ]]
613	then
614	printf "\n *** updates will be made for ALL hosts found in"
615	printf "\n the configuration file"
616	else
617	printf "\n *** update will be made for host \"$host\" "
618	fi
619
620	if [[ $silent = false ]]
621	then
622	answer=dummy
623	printf "\n\n"
624	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
625	do
626	printf " >>> continue (y/n) ? "
627	read answer
628	done
629	if [[ $answer = n \|\| $answer = N ]]
630	then
631	locat=user_abort; exit
632	fi
633	fi
634
635
636
637
638	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
639	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
640	printf "\n *** scanning configuration file for host(s) ..."
641
642	grep %fopts $config_file > tmp_mbuild
643	while read line
644	do
645	# KOMMENTARZEILEN UEBERSPRINGEN
646	[[ $(echo $line \| cut -c1) = "#" ]] && continue
647	(( ihost = ihost + 1 ))
648	hostline[$ihost]="$line"
649	done < tmp_mbuild
650
651
652	while (( ih < ihost ))
653	do
654
655	(( ih = ih + 1 ))
656
657	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
658	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
659	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
660	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
661	remote_host=`echo $remote_host_string \| cut -d" " -f1`
662	if [[ $host != all ]]
663	then
664	[[ $remote_host != $host ]] && continue
665	fi
666	host_found=true
667	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
668	if [[ $condition1 = $remote_host ]]
669	then
670	condition1=""
671	else
672	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
673	fi
674
675
676	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
677	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
678	then
679	if [[ $ibm_hb_done = true ]]
680	then
681	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
682	printf "\n been carried out on one of the HLRN machines\n"
683	continue
684	fi
685	fi
686
687	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
688	if [[ $remote_host = lcmuk ]]
689	then
690	if [[ $lcmuk_done = true ]]
691	then
692	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
693	printf "\n been carried out on this host\n"
694	continue
695	fi
696	fi
697
698
699	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
700	netcdf_support=false
701	case $remote_host in
702	(lcmuk) remote_addres=130.75.105.3; cpp_options=""
703	netcdf_support=true
704	if [[ $scirocco = true ]]
705	then
706	netcdf_path=/opt/netcdf/3.6.2-beta4
707	elif [[ $fimm = true ]]
708	then
709	netcdf_path=/local/netcdf
710	else
711	netcdf_path=/muksoft/packages/netcdf/linux
712	fi;;
713	(lctit) remote_addres=172.17.75.161; netcdf_support=true
714	netcdf_path=/home/usr5/mkanda/netcdf-3.6.2; cpp_options="-Mpreprocess";;
715	(decalpha) remote_addres=165.132.26.56; cpp_options="-cpp"; netcdf_support=true
716	netcdf_path=/usr/local/netcdf-3.5.1;;
717	(ibm) remote_addres=134.76.99.81; cpp_options="-qsuffix=cpp=f90";;
718	(ibmb) remote_addres=130.73.230.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
719	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
720	(ibmh) remote_addres=130.75.4.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
721	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
722	(ibms) remote_addres=150.183.5.101; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
723	netcdf_path=/applic/lib/NETCDF64;;
724	(ibmy) remote_addres=165.132.26.58; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
725	netcdf_path=/usr1/users/raasch/pub/netcdf-3.6.0-p1;;
726	(nech) remote_addres=136.172.44.192; cpp_options="-Ep"; netcdf_support=true
727	netcdf_path=/pool/SX-6/netcdf/netcdf-3.6.0-p1;;
728	(neck) remote_addres=133.5.178.11; cpp_options="-Ep"; netcdf_support=true
729	netcdf_path=/home/DSRC/NC/tatuyama/pub/netcdf-3.6.0-p1;;
730	(t3eb) remote_addres=130.73.206.21; cpp_options="-eZ";;
731	(t3eh) remote_addres=130.75.4.131; cpp_options="-eZ";;
732	(t3ej2) remote_addres=134.94.100.22; cpp_options="-eZ";;
733	(t3ej5) remote_addres=134.94.100.49; cpp_options="-eZ";;
734	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
735	(*) printf "\n +++ remote host \"$remote_host\" unknown";
736	printf "\n please inform S. Raasch!";
737	locat=config_file; exit;;
738	esac
739
740
741	# REMOTE-USERNAMEN ERMITTELN
742	line=""
743	grep "$remote_host_string" $config_file \| grep "%remote_username" > tmp_mbuild
744	while read line1
745	do
746	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
747	then
748	line="$line1"
749	fi
750	done < tmp_mbuild
751
752	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
753	then
754	printf "\n +++ no remote username found in configuration file"
755	printf "\n for \"$remote_host_string\" "
756	locat=config_file; exit
757	else
758	remote_username=`echo $line \| cut -d" " -s -f2`
759	fi
760
761
762	# REMOTE-QUELLTEXTPFAD ERMITTELN
763	line=""
764	remote_source_path=""
765	grep "$remote_host_string" $config_file \| grep "%source_path" > tmp_mbuild
766	while read line1
767	do
768	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
769	then
770	line="$line1"
771	fi
772	done < tmp_mbuild
773
774	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
775	then
776	remote_source_path=`echo $line \| cut -d" " -s -f2`
777	fi
778	if [[ "$remote_source_path" = "" ]]
779	then
780	if [[ "$global_source_path" != "" ]]
781	then
782	remote_source_path=$global_source_path
783	else
784	printf "\n +++ no source path found in configuration file"
785	printf "\n for \"$remote_host_string\" "
786	locat=config_file; exit
787	fi
788	fi
789
790	remote_ud=${remote_source_path}/../UTIL
791	remote_ud=$(eval echo $remote_ud)
792
793
794	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
795	remote_md=""
796	line=""
797	grep "$remote_host_string" $config_file \| grep "%depository_path" > tmp_mbuild
798	while read line1
799	do
800	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
801	then
802	line="$line1"
803	fi
804	done < tmp_mbuild
805
806	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
807	then
808	remote_md=`echo $line \| cut -d" " -s -f2`
809	fi
810	if [[ "$remote_md" = "" ]]
811	then
812	if [[ "$global_depository_path" != "" ]]
813	then
814	remote_md=$global_depository_path
815	else
816	printf "\n +++ no depository path found in configuration file"
817	printf "\n for \"$remote_host_string\" "
818	printf "\n please set \"\%depository_path\" in configuration file"
819	locat=config_file; exit
820	fi
821	fi
822
823	remote_md=$(eval echo $remote_md)
824
825
826	# COMPILERNAMEN ERMITTELN
827	line=""
828	grep "$remote_host_string" $config_file \| grep "%compiler_name " > tmp_mbuild
829	while read line1
830	do
831	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
832	then
833	line="$line1"
834	fi
835	done < tmp_mbuild
836
837	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
838	then
839	printf "\n +++ no compiler name found in configuration file"
840	printf "\n for \"$remote_host_string\" "
841	locat=config_file; exit
842	else
843	compiler_name=`echo $line \| cut -d" " -s -f2`
844	fi
845
846
847	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
848	# SERIELLER COMPILERNAME ERMITTELT WERDEN
849	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
850	then
851	line=""
852	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > tmp_mbuild
853	while read line1
854	do
855	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
856	then
857	line="$line1"
858	fi
859	done < tmp_mbuild
860
861	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
862	then
863	printf "\n +++ no serial compiler name found in configuration file"
864	printf "\n for \"$remote_host_string\" "
865	locat=config_file; exit
866	else
867	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
868	fi
869	else
870	compiler_name_ser=$compiler_name
871	fi
872
873
874
875	# PRAEPROZESSOR-DIREKTIVEN SETZEN
876	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
877	then
878	if [[ $remote_host = ibms ]]
879	then
880	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
881	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf"
882	else
883	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
884	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf,-D__netcdf_64bit"
885	[[ $remote_host = ibmy ]] && cpp_options="${cpp_options},-D__ibmy_special"
886	fi
887	elif [[ $remote_host = lcmuk ]]
888	then
889	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
890	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
891	elif [[ $remote_host = lctit ]]
892	then
893	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
894	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
895	elif [[ $remote_host = decalpha ]]
896	then
897	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
898	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
899	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
900	then
901	cpp_options="$cpp_options -DMPI_REAL=MPI_REAL8 -DMPI_2REAL=MPI_2REAL8 -DSCFFT=DZFFT -DCSFFT=ZDFFT"
902	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
903	fi
904
905	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
906	then
907	for string in $remote_host_string
908	do
909	if [[ $(echo $string \| cut -c1-3) = ibm ]]
910	then
911	cpp_options="${cpp_options},-D__ibm"
912	if [[ $remote_host = ibmy ]]
913	then
914	cpp_options="${cpp_options},-D__ibmy_special"
915	fi
916	else
917	cpp_options="${cpp_options},-D__$string"
918	fi
919	done
920	cpp_options="$cpp_options "
921	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
922	then
923	for string in $remote_host_string
924	do
925	if [[ $(echo $string \| cut -c1-3) = nec ]]
926	then
927	cpp_options="${cpp_options} -D__nec"
928	else
929	cpp_options="${cpp_options} -D__$string"
930	fi
931	done
932	cpp_options="$cpp_options "
933	else
934	for string in $remote_host_string
935	do
936	cpp_options="$cpp_options -D__$string "
937	done
938	fi
939
940
941	# COMPILEROPTIONEN ERMITTELN
942	line=""
943	grep "$remote_host_string" $config_file \| grep "%fopts" > tmp_mbuild
944	while read line1
945	do
946	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
947	then
948	line="$line1"
949	fi
950	done < tmp_mbuild
951	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
952	then
953	printf "\n +++ no compiler options found in configuration file"
954	printf "\n for \"$remote_host_string\" "
955	locat=config_file; exit
956	else
957	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
958	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
959	fi
960	if [[ $netcdf_support = true ]]
961	then
962	case $remote_host in
963	(decalpha) compiler_options="-I${netcdf_path}/include $compiler_options";;
964	(ibmb\|ibmh) compiler_options="-I ${netcdf_path}/include-64 $compiler_options";;
965	(ibms) compiler_options="-I /applic/netcdf64/src/f90 $compiler_options";;
966	(ibmy) compiler_options="-I ${netcdf_path}/include $compiler_options";;
967	(lcmuk) compiler_options="-I ${netcdf_path}/include $compiler_options";;
968	(lctit) compiler_options="-I ${netcdf_path}/include $compiler_options";;
969	(nech\|neck) compiler_options="-I ${netcdf_path}/include $compiler_options";;
970	esac
971	fi
972
973
974
975	# LADER-OPTIONEN ERMITTELN
976	line=""
977	grep "$remote_host_string" $config_file \| grep "%lopts" > tmp_mbuild
978	while read line1
979	do
980	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
981	then
982	line="$line1"
983	fi
984	done < tmp_mbuild
985
986	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
987	then
988	printf "\n +++ no loader options found in configuration file"
989	printf "\n for \"$remote_host_string\" "
990	locat=config_file; exit
991	else
992	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
993	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
994	fi
995	if [[ $netcdf_support = true ]]
996	then
997	case $remote_host in
998	(decalpha) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
999	(ibmb\|ibmh\|lcmuk\|nech\|neck) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
1000	(ibms) loader_options="$loader_options -L${netcdf_path} -lnetcdf";;
1001	(ibmy) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
1002	(lctit) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
1003	esac
1004	fi
1005
1006
1007	printf "\n\n#------------------------------------------------------------------------# \n"
1008	if [[ $remote_host = $local_host ]]
1009	then
1010	column1="remote_host:"; column2="$remote_host (= local host!)"
1011	else
1012	column1="remote_host:"; column2=$remote_host
1013	fi
1014	printf "\| $column1$column2 \| \n"
1015	printf "\| \| \n"
1016	column1="conditions:"; column2="$condition1 $condition2"
1017	printf "\| $column1$column2 \| \n"
1018	column1="make depository:"; column2=$remote_md
1019	printf "\| $column1$column2 \| \n"
1020	if [[ $compile_utility_programs = true ]]
1021	then
1022	column1="utility directory:"; column2=$remote_ud
1023	printf "\| $column1$column2 \| \n"
1024	fi
1025	column1="username:"; column2=$remote_username
1026	printf "\| $column1$column2 \| \n"
1027	column1="addres:"; column2=$remote_addres
1028	printf "\| $column1$column2 \| \n"
1029	column1="compiler:"; column2=$compiler_name
1030	printf "\| $column1$column2 \| \n"
1031	if [[ $compile_utility_programs = true ]]
1032	then
1033	column1="serial compiler:"; column2=$compiler_name_ser
1034	printf "\| $column1$column2 \| \n"
1035	fi
1036	column1="cpp options:"; column2=$cpp_options
1037	printf "\| $column1$column2 \| \n"
1038	line=$(echo "$cpp_options" \| cut -c51-)
1039	while [[ "$line" != "" ]]
1040	do
1041	column1=""
1042	column2=$line
1043	printf "\| $column1$column2 \| \n"
1044	line=$(echo "$line" \| cut -c51-)
1045	done
1046	column1="compiler options:"; column2=$compiler_options
1047	printf "\| $column1$column2 \| \n"
1048	line=$(echo "$compiler_options" \| cut -c51-)
1049	while [[ "$line" != "" ]]
1050	do
1051	column1=""
1052	column2=$line
1053	printf "\| $column1$column2 \| \n"
1054	line=$(echo "$line" \| cut -c51-)
1055	done
1056	column1="loader options:"; column2=$loader_options
1057	printf "\| $column1$column2 \| \n"
1058	line=$(echo "$loader_options" \| cut -c51-)
1059	while [[ "$line" != "" ]]
1060	do
1061	column1=""
1062	column2=$line
1063	printf "\| $column1$column2 \| \n"
1064	line=$(echo "$line" \| cut -c51-)
1065	done
1066	printf "#------------------------------------------------------------------------# \n"
1067
1068	if [[ $silent = false ]]
1069	then
1070	answer=dummy
1071	printf "\n\n"
1072	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1073	do
1074	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1075	read answer
1076	done
1077	if [[ $answer = a \|\| $answer = A ]]
1078	then
1079	locat=user_abort; exit
1080	fi
1081	if [[ $answer = c \|\| $answer = C ]]
1082	then
1083	silent=false
1084	fi
1085	if [[ $answer = s \|\| $answer = S ]]
1086	then
1087	continue
1088	fi
1089	fi
1090
1091
1092	if [[ $remote_mode = batch ]]
1093	then
1094
1095	# BATCH-JOB PARAMETER SETZEN
1096	case $remote_host in
1097	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1098	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
1099	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1100	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1101	esac
1102
1103
1104	# BATCH-JOB ZUSAMMENSTELLEN
1105	printf "\n *** creating batch-job for remote host"
1106	echo " " > mbuild_job
1107
1108	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1109	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1110	if [[ $remote_host = t3ej2 ]]
1111	then
1112	echo "set +vx" >> mbuild_job
1113	echo ". .profile" >> mbuild_job
1114	echo "set -x" >> mbuild_job
1115	fi
1116
1117	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1118	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
1119	then
1120	echo "module list" >> mbuild_job
1121	fi
1122
1123
1124	# WECHSEL IN TEMPORAERES VERZEICHNIS
1125	echo "cd ${remote_md}" >> mbuild_job
1126
1127
1128	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1129	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
1130	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
1131
1132
1133	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1134	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
1135
1136
1137	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1138	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
1139
1140
1141	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1142	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
1143	echo "chmod u+w *" >> mbuild_job
1144
1145	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1146	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
1147
1148
1149	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1150	echo "make clean" >> mbuild_job
1151	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1152	echo "rm *.f90 Makefile" >> mbuild_job
1153
1154
1155
1156	# JOB MITTELS SUBJOB STARTEN
1157	printf "\n *** sending batch job to remote host"
1158	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1159
1160
1161	# JOBFILE LOESCHEN
1162	# rm aljob
1163
1164	else
1165
1166	if [[ $remote_host != $local_host ]]
1167	then
1168
1169	if [[ $compile_utility_programs = false ]]
1170	then
1171
1172	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1173	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1174	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1175	if [[ $remote_host != lctit ]]
1176	then
1177	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1178	else
1179	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1180	# MIT SSH, DESHALB AUFRUF PER PIPE
1181	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1182	fi
1183	if [[ $local_host = decalpha ]]
1184	then
1185	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1186	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1187	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1188	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1189	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1190	else
1191	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1192	fi
1193
1194
1195
1196	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1197	echo " *** untar previous update on remote host, if existing"
1198	if [[ $remote_host != lctit ]]
1199	then
1200	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1201	else
1202	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1203	# MIT SSH, DESHALB AUFRUF PER PIPE
1204	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1205	fi
1206
1207
1208	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1209	echo " *** untar actual sources on remote host"
1210	if [[ $remote_host != lctit ]]
1211	then
1212	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1213	else
1214	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1215	# MIT SSH, DESHALB AUFRUF PER PIPE
1216	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1217	fi
1218
1219
1220	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1221	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1222	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1223	# Z.B. DIE PFADE ZUM COMPILER)
1224	echo " *** execute \"make\" on remote host"
1225
1226	if [[ $remote_host = nech ]]
1227	then
1228	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1229	else
1230	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1231	fi
1232
1233	if [[ $remote_host = t3eh ]]
1234	then
1235
1236	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1237
1238	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1239	then
1240
1241	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1242
1243	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1244	then
1245
1246	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1247
1248	elif [[ $remote_host = lctit ]]
1249	then
1250
1251	echo " " > ${remote_host}_last_make_protokoll
1252	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1253	do
1254	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1255	done
1256
1257	else
1258
1259	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1260
1261	fi
1262
1263	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1264	then
1265	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1266	if [[ $silent = false ]]
1267	then
1268	answer=dummy
1269	printf "\n"
1270	while [[ "$answer" != c && "$answer" != k ]]
1271	do
1272	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1273	read answer
1274	if [[ "$answer" = l ]]
1275	then
1276	more ${remote_host}_last_make_protokoll
1277	fi
1278	done
1279	if [[ $answer = k ]]
1280	then
1281	locat=user_abort; exit
1282	fi
1283	fi
1284	fi
1285
1286
1287
1288	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1289	printf "\n *** tar update on remote host ..."
1290	if [[ $remote_host != lctit ]]
1291	then
1292	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod"
1293	else
1294	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1295	# MIT SSH, DESHALB AUFRUF PER PIPE
1296	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1297	fi
1298
1299
1300	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1301	# printf "\n *** \"make clean\" on remote host ..."
1302	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1303	# printf "\n"
1304
1305
1306
1307
1308	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1309	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1310	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1311	elif [[ $compile_utility_programs = true ]]
1312	then
1313
1314	printf "\n\n"
1315	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1316	cd ${local_source_path}/../SCRIPTS
1317
1318	if [[ $remote_host != lctit ]]
1319	then
1320	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1321	else
1322	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1323	# MIT SSH, DESHALB AUFRUF PER PIPE
1324	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1325	fi
1326
1327	# KOPIEREN DER SCRIPTE
1328	if [[ $local_host = decalpha ]]
1329	then
1330	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1331	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1332	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1333	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1334	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1335	else
1336	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1337	fi
1338
1339	cd - > /dev/null
1340	cd ${local_source_path}/../UTIL
1341
1342
1343	# KOPIEREN DER UTILITY-PROGRAMME
1344	if [[ $local_host = decalpha ]]
1345	then
1346	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1347	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1348	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1349	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1350	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1351	else
1352	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1353	fi
1354
1355
1356
1357	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1358	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1359	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1360	# Z.B. DIE PFADE ZUM COMPILER)
1361	echo " *** execute \"make\" on remote host"
1362
1363	if [[ $remote_host = nech ]]
1364	then
1365	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1366	else
1367	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1368	fi
1369
1370	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1371	then
1372
1373	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1374
1375	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1376	then
1377
1378	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1379
1380	elif [[ $remote_host = lctit ]]
1381	then
1382
1383	echo " " > ${remote_host}_last_make_protokoll
1384	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1385	do
1386	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1387	done
1388
1389	else
1390
1391	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1392
1393	fi
1394
1395	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1396
1397	rm -rf ${remote_host}_last_make_protokoll
1398
1399	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1400	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
1401
1402	else
1403
1404	if [[ $compile_utility_programs = false ]]
1405	then
1406
1407	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1408	echo " "
1409	echo " *** execute \"make\" on local host"
1410
1411	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1412
1413	if [[ $? != 0 ]]
1414	then
1415	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1416	if [[ $silent = false ]]
1417	then
1418	answer=dummy
1419	printf "\n"
1420	while [[ "$answer" != c && "$answer" != k ]]
1421	do
1422	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1423	read answer
1424	if [[ "$answer" = l ]]
1425	then
1426	more ${remote_host}_last_make_protokoll
1427	fi
1428	done
1429	if [[ $answer = k ]]
1430	then
1431	locat=user_abort; exit
1432	fi
1433	fi
1434	fi
1435
1436
1437	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1438	printf "\n *** tar update on local host ..."
1439	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1440
1441
1442	# COMPILE THE UTILITY PROGRAMS
1443	elif [[ $compile_utility_programs = true ]]
1444	then
1445	printf "\n\n"
1446	echo " *** compiling the utility programs ..."
1447	cd ${local_source_path}/../UTIL
1448	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1449	cd - > /dev/null
1450	fi
1451
1452
1453	# NUR EINMAL AUF LCMUK UEBERSETZEN
1454	[[ $remote_host = lcmuk ]] && lcmuk_done=true
1455
1456	fi
1457
1458	fi
1459	done
1460
1461
1462	if [[ $host_found = false ]]
1463	then
1464	if [[ $host = all ]]
1465	then
1466	printf "\n +++ no hosts found in configuration file"
1467	else
1468	printf "\n +++ host \"$host\" not found in configuration file"
1469	fi
1470	locat=config_file; exit
1471	fi
1472
1473
1474
1475	# ABSCHLIESSENDE ARBEITEN
1476	rm -f hosts_found_in_config_file
1477

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |