Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 719

Last change on this file since 719 was 717, checked in by gryschka, 14 years ago
added lckordi
Property svn:keywords set to `Id Rev`
File size: 48.4 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 717 2011-04-03 16:04:01Z gryschka $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119	# 04/03/11 - BjornM- re-adjustments for lcxt4
120	# 06/03/11 - Siggi - adjustments for ibmkisti
121	# 03/04/11 - Micha - added lckordi
122
123
124
125	# VARIABLE DECLARATIONS + DEFAULT VALUES
126	compile_utility_programs=false
127	config_file=.mrun.config
128	fimm=false
129	host=all
130	host_found=false
131	locat=normal
132	makefile=""
133	module_calls=""
134	scirocco=false
135	silent=false
136	suf=f90
137	update=false
138	working_directory=`pwd`
139
140	typeset -i ih ihost=0
141
142	typeset -R30 calltime
143	typeset -L20 column1
144	typeset -L50 column2
145	typeset -L70 column3
146	typeset -L40 version="MBUILD 2.1 Rev$Rev: 717 $"
147
148	# ERROR HANDLING
149	# IN CASE OF EXIT:
150	trap 'rm -rf $working_directory/tmp_mbuild
151	if [[ $locat != normal ]]
152	then
153	printf "\n\n +++ mbuild killed \n\n"
154	else
155	printf "\n\n *** mbuild finished \n\n"
156	fi' exit
157
158
159	# IN CASE OF TERMINAL-BREAK:
160	trap 'rm -rf $working_directory/tmp_mbuild
161	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
162	exit
163	' 2
164
165
166	tmp_mbuild=${working_directory}/tmp_mbuild
167
168	# READ SHELLSCRIPT-OPTIONS
169	while getopts :c:h:m:s:u option
170	do
171	case $option in
172	(c) config_file=$OPTARG;;
173	(h) host=$OPTARG;;
174	(m) makefile=$OPTARG;;
175	(s) suf=$OPTARG;;
176	(u) compile_utility_programs=true;;
177	(\?) printf "\n +++ unknown option $OPTARG \n";
178	locat=parameter; exit;;
179	esac
180	done
181
182
183
184	# CHECK, IF CONFIGURATION-FILE EXISTS
185	if [[ ! -f $config_file ]]
186	then
187	printf "\n +++ configuration file: "
188	printf "\n $config_file"
189	printf "\n does not exist"
190	locat=configuration; exit
191	fi
192
193
194
195	# DETERMINE THE LOCAL HOST
196	local_host_real_name=$(hostname)
197	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
198
199
200
201	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
202	line=""
203	grep "%host_identifier" $config_file > $tmp_mbuild
204	while read line
205	do
206	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
207	then
208	HOSTNAME=`echo $line \| cut -d" " -s -f2`
209	host_identifier=`echo $line \| cut -d" " -s -f3`
210	if [[ $local_host_real_name = $HOSTNAME ]]
211	then
212	local_host=$host_identifier
213	break
214	fi
215	fi
216	done < $tmp_mbuild
217
218	if [[ "$local_host" = "" ]]
219	then
220	printf "\n +++ no host identifier found in configuration file \"$config_file\""
221	printf "\n for local host \"$local_host_real_name\"."
222	printf "\n Please add line"
223	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
224	printf "\n to the configuration file."
225	locat=local_host; exit
226	fi
227
228
229
230	[[ $local_host_real_name = scirocco ]] && scirocco=true
231	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
232
233
234
235	if [[ $local_host != ibms ]]
236	then
237	config_file=$PWD/$config_file
238	else
239	config_file=`pwd`/$config_file
240	fi
241
242
243
244	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
245	line=""
246	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
247	while read line
248	do
249	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
250	then
251	local_username=`echo $line \| cut -d" " -s -f2`
252	fi
253	done < $tmp_mbuild
254
255
256	if [[ "$local_username" = "" ]]
257	then
258	printf "\n +++ no user name found in configuration file"
259	printf "\n for local host \"$local_host\" "
260	locat=config_file; exit
261	fi
262
263
264	# DETERMINE LOCAL SOURCE-CODE PATH.
265	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
266	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
267	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
268	line=""
269	grep "%" $config_file > $tmp_mbuild
270	while read line
271	do
272	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
273	then
274	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
275	value=`echo $line \| cut -d" " -s -f2`
276	eval export $var=\$value
277	fi
278	done < $tmp_mbuild
279
280	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
281	line=""
282	grep "%source_path" $config_file > $tmp_mbuild
283	while read line
284	do
285	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
286	then
287	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
288	then
289	global_source_path=`echo $line \| cut -d" " -s -f2`
290	fi
291	fi
292	done < $tmp_mbuild
293
294	line=""
295	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
296	while read line
297	do
298	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
299	then
300	local_source_path=`echo $line \| cut -d" " -s -f2`
301	fi
302	done < $tmp_mbuild
303
304	if [[ "$local_source_path" = "" ]]
305	then
306	if [[ "$global_source_path" != "" ]]
307	then
308	local_source_path=$global_source_path
309	else
310	printf "\n +++ no source path found in configuration file"
311	printf "\n for local host \"$local_host\" "
312	printf "\n please set \"\%source_path\" in configuration file"
313	locat=config_file; exit
314	fi
315	fi
316	eval local_source_path=$local_source_path
317	eval local_source_path=$local_source_path
318
319
320
321	# DETERMINE GLOBAL DEPOSITORY-PATH
322	line=""
323	grep "%depository_path" $config_file > $tmp_mbuild
324	while read line
325	do
326	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
327	then
328	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
329	then
330	global_depository_path=`echo $line \| cut -d" " -s -f2`
331	fi
332	fi
333	done < $tmp_mbuild
334
335
336
337	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
338	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
339	then
340	printf "\n +++ no main program or more than one main program defined"
341	printf "\n in configuration file"
342	locat=configuration; exit
343	else
344	line=`grep "%mainprog" $config_file`
345	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
346	then
347	printf "\n +++ no main program defined in configuration file"
348	locat=configuration; exit
349	fi
350	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
351	fi
352
353
354
355	# CHECK IF MAKEFILE EXITS
356	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
357	if [[ ! -f $makefile ]]
358	then
359	printf "\n +++ makefile: "
360	printf "\n $makefile"
361	printf "\n does not exist"
362	locat=makefile; exit
363	fi
364
365
366	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
367	calltime=$(date)
368	printf "\n"
369	printf "#------------------------------------------------------------------------# \n"
370	printf "\| $version$calltime \| \n"
371	printf "\| \| \n"
372	column1="called on:"; column2=$local_host_real_name
373	printf "\| $column1$column2 \| \n"
374	column1="local username:"; column2=$local_username
375	printf "\| $column1$column2 \| \n"
376	column1="local IP-addres:"; column2=$local_addres
377	printf "\| $column1$column2 \| \n"
378	column1="config file:"; column2=$config_file
379	printf "\| $column1$column2 \| \n"
380	column1="makefile:"; column2=$makefile
381	printf "\| $column1$column2 \| \n"
382	column1="local source path:"; column2=$local_source_path
383	printf "\| $column1$column2 \| \n"
384	printf "#------------------------------------------------------------------------# \n"
385
386	# printf "\| \| \n"
387
388
389	if [[ $compile_utility_programs = false ]]
390	then
391
392	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
393	# WITH OVERWRITING FILES ON THE REMOTE HOST
394	cd $local_source_path
395	printf "\n\n *** tar of makefile and source files in $local_source_path"
396	tar -cf ${mainprog}_sources.tar Makefile *.$suf
397	printf "\n"
398
399	fi
400
401
402
403	# GET CONFIRMATION TO CONTINUE
404	if [[ $host = all ]]
405	then
406	printf "\n *** updates will be made for ALL hosts found in"
407	printf "\n the configuration file"
408	else
409	printf "\n *** update will be made for host \"$host\" "
410	fi
411
412	if [[ $silent = false ]]
413	then
414	answer=dummy
415	printf "\n\n"
416	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
417	do
418	printf " >>> continue (y/n) ? "
419	read answer
420	done
421	if [[ $answer = n \|\| $answer = N ]]
422	then
423	locat=user_abort; exit
424	fi
425	fi
426
427
428
429
430	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
431	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
432	printf "\n *** scanning configuration file for host(s) ..."
433
434	grep %fopts $config_file > $tmp_mbuild
435	while read line
436	do
437	# KOMMENTARZEILEN UEBERSPRINGEN
438	[[ $(echo $line \| cut -c1) = "#" ]] && continue
439	(( ihost = ihost + 1 ))
440	hostline[$ihost]="$line"
441	done < $tmp_mbuild
442
443
444	while (( ih < ihost ))
445	do
446
447	(( ih = ih + 1 ))
448
449	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
450	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
451	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
452	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
453	remote_host=`echo $remote_host_string \| cut -d" " -f1`
454	if [[ $host != all ]]
455	then
456	[[ $remote_host != $host ]] && continue
457	fi
458	host_found=true
459	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
460	if [[ $condition1 = $remote_host ]]
461	then
462	condition1=""
463	else
464	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
465	fi
466
467	modules=""
468	netcdf_inc=""
469	netcdf_lib=""
470
471	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
472	case $remote_host in
473	(lckordi) remote_adress=210.219.61.8;;
474	(lcmuk) remote_addres=130.75.105.2;;
475	(lcrte) remote_addres=133.5.185.60;;
476	(lcsgib) remote_addres=130.73.232.102;;
477	(lcsgih) remote_addres=130.75.4.102;;
478	(lck) remote_addres=165.132.26.61;;
479	(lctit) remote_addres=10.1.6.170;;
480	(lcxt4) remote_addres=129.177.20.113;;
481	(lcxt5m) remote_addres=193.166.211.144;;
482	(decalpha) remote_addres=165.132.26.56;;
483	(ibmh) remote_addres=136.172.40.15;;
484	(ibmkisti) remote_addres=150.183.146.24;;
485	(ibmku) remote_addres=133.5.4.129;;
486	(ibms) remote_addres=150.183.5.101;;
487	(ibmy) remote_addres=165.132.26.58;;
488	(nech) remote_addres=136.172.44.192;;
489	(neck) remote_addres=133.5.178.11;;
490	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
491	(*) if [[ $local_host != $remote_host ]]
492	then
493	printf "\n +++ remote host \"$remote_host\" unknown";
494	printf "\n please inform PALM group support!"
495	fi;;
496	esac
497
498
499	# REMOTE-USERNAMEN ERMITTELN
500	line=""
501	found=false
502	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
503	while read line1
504	do
505
506	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
507	then
508	line="$line1"
509	fi
510
511	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
512	then
513	remote_username=`echo $line \| cut -d" " -s -f2`
514	found=true
515	fi
516
517	done < $tmp_mbuild
518
519	if [[ $found = false ]]
520	then
521	printf "\n +++ no remote username found in configuration file"
522	printf "\n for \"$remote_host_string\" "
523	locat=config_file; exit
524	fi
525
526
527	# REMOTE-QUELLTEXTPFAD ERMITTELN
528	line=""
529	remote_source_path=""
530	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
531	while read line1
532	do
533
534	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
535	then
536	line="$line1"
537	fi
538
539	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
540	then
541	remote_source_path=`echo $line \| cut -d" " -s -f2`
542	fi
543
544	done < $tmp_mbuild
545
546	if [[ "$remote_source_path" = "" ]]
547	then
548	if [[ "$global_source_path" != "" ]]
549	then
550	remote_source_path=$global_source_path
551	else
552	printf "\n +++ no source path found in configuration file"
553	printf "\n for \"$remote_host_string\" "
554	locat=config_file; exit
555	fi
556	fi
557
558	remote_ud=${remote_source_path}/../UTIL
559	remote_ud=$(eval echo $remote_ud)
560
561
562	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
563	remote_md=""
564	line=""
565	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
566	while read line1
567	do
568
569	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
570	then
571	line="$line1"
572	fi
573
574	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
575	then
576	remote_md=`echo $line \| cut -d" " -s -f2`
577	fi
578
579	done < $tmp_mbuild
580
581	if [[ "$remote_md" = "" ]]
582	then
583	if [[ "$global_depository_path" != "" ]]
584	then
585	remote_md=$global_depository_path
586	else
587	printf "\n +++ no depository path found in configuration file"
588	printf "\n for \"$remote_host_string\" "
589	printf "\n please set \"\%depository_path\" in configuration file"
590	locat=config_file; exit
591	fi
592	fi
593
594	remote_md=$(eval echo $remote_md)
595	block=""
596	[[ "$condition1" != "" ]] && block=_$condition1
597	[[ "$condition2" != "" ]] && block=${block}_$condition2
598	remote_md=${remote_md}$block
599
600
601	# COMPILERNAMEN ERMITTELN
602	line=""
603	found=false
604	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
605	while read line1
606	do
607
608	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
609	then
610	line="$line1"
611	fi
612
613	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
614	then
615	compiler_name=`echo $line \| cut -d" " -s -f2`
616	found=true
617	fi
618
619	done < $tmp_mbuild
620
621	if [[ $found = false ]]
622	then
623	printf "\n +++ no compiler name found in configuration file"
624	printf "\n for \"$remote_host_string\" "
625	locat=config_file; exit
626	fi
627
628
629	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
630	# SERIELLER COMPILERNAME ERMITTELT WERDEN
631	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
632	then
633	line=""
634	found=false
635	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
636	while read line1
637	do
638
639	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
640	then
641	line="$line1"
642	fi
643
644	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
645	then
646	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
647	found=true
648	fi
649
650	done < $tmp_mbuild
651
652	if [[ $found = false ]]
653	then
654	printf "\n +++ no serial compiler name found in configuration file"
655	printf "\n for \"$remote_host_string\" "
656	locat=config_file; exit
657	fi
658	else
659	compiler_name_ser=$compiler_name
660	fi
661
662
663
664	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
665	line=""
666	found=false
667	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
668	while read line1
669	do
670
671	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
672	then
673	line="$line1"
674	fi
675
676	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
677	then
678	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
679	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
680	found=true
681	fi
682
683	done < $tmp_mbuild
684
685	if [[ $found = false ]]
686	then
687	printf "\n +++ no preprocessor options found in configuration file"
688	printf "\n for \"$remote_host_string\" "
689	locat=config_file; exit
690	fi
691
692
693	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
694	for string in $remote_host_string
695	do
696	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
697	then
698	cpp_options="$cpp_options -D__lc "
699	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
700	then
701	cpp_options="${cpp_options},-D__ibm"
702	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
703	then
704	cpp_options="${cpp_options} -D__nec"
705	else
706	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
707	then
708	cpp_options="${cpp_options},-D__$string"
709	else
710	cpp_options="$cpp_options -D__$string "
711	fi
712	fi
713	done
714
715
716
717	# NETCDF-OPTIONEN ERMITTELN
718	line=""
719	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
720	while read line1
721	do
722
723	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
724	then
725	line="$line1"
726	fi
727
728	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
729	then
730	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
731	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
732	fi
733
734	done < $tmp_mbuild
735
736	line=""
737	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
738	while read line1
739	do
740
741	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
742	then
743	line="$line1"
744	fi
745
746	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
747	then
748	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
749	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
750	fi
751
752	done < $tmp_mbuild
753
754
755
756	# get make options
757	line=""
758	found=false
759	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
760	while read line1
761	do
762
763	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
764	then
765	line="$line1"
766	fi
767
768	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
769	then
770	# remove colons from directive string
771	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
772
773	fi
774
775	done < $tmp_mbuild
776
777
778
779	# COMPILEROPTIONEN ERMITTELN
780	line=""
781	found=false
782	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
783	while read line1
784	do
785
786	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
787	then
788	line="$line1"
789	fi
790
791	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
792	then
793	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
794	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
795	found=true
796
797	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
798	compiler_options="$compiler_options $netcdf_inc"
799	fi
800
801	done < $tmp_mbuild
802
803	if [[ $found = false ]]
804	then
805	printf "\n +++ no compiler options found in configuration file"
806	printf "\n for \"$remote_host_string\" "
807	locat=config_file; exit
808	fi
809
810
811
812	# get modules to be loaded
813	line=""
814	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
815	while read line1
816	do
817
818	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
819	then
820	line="$line1"
821	fi
822
823	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
824	then
825	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
826	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
827	fi
828
829	done < $tmp_mbuild
830
831
832
833
834	# LADER-OPTIONEN ERMITTELN
835	line=""
836	found=false
837	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
838	while read line1
839	do
840
841	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
842	then
843	line="$line1"
844	fi
845
846	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
847	then
848	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
849	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
850	found=true
851
852	# NETCDF-LIBRARY HINZUFUEGEN
853	loader_options="$loader_options $netcdf_lib"
854	fi
855
856	done < $tmp_mbuild
857
858	if [[ $found = false ]]
859	then
860	printf "\n +++ no loader options found in configuration file"
861	printf "\n for \"$remote_host_string\" "
862	locat=config_file; exit
863	fi
864
865
866	printf "\n\n#------------------------------------------------------------------------# \n"
867	if [[ $remote_host = $local_host ]]
868	then
869	column1="remote_host:"; column2="$remote_host (= local host!)"
870	else
871	column1="remote_host:"; column2=$remote_host
872	fi
873	printf "\| $column1$column2 \| \n"
874	printf "\| \| \n"
875	column1="conditions:"; column2="$condition1 $condition2"
876	printf "\| $column1$column2 \| \n"
877	column1="make depository:"; column2=$remote_md
878	printf "\| $column1$column2 \| \n"
879	line=$(echo "$remote_md" \| cut -c51-)
880	while [[ "$line" != "" ]]
881	do
882	column1=""
883	column2=$line
884	printf "\| $column1$column2 \| \n"
885	line=$(echo "$line" \| cut -c51-)
886	done
887	if [[ $compile_utility_programs = true ]]
888	then
889	column1="utility directory:"; column2=$remote_ud
890	printf "\| $column1$column2 \| \n"
891	fi
892	column1="username:"; column2=$remote_username
893	printf "\| $column1$column2 \| \n"
894	column1="addres:"; column2=$remote_addres
895	printf "\| $column1$column2 \| \n"
896	column1="compiler:"; column2=$compiler_name
897	printf "\| $column1$column2 \| \n"
898	if [[ $compile_utility_programs = true ]]
899	then
900	column1="serial compiler:"; column2=$compiler_name_ser
901	printf "\| $column1$column2 \| \n"
902	fi
903	if [[ "$make_options" != "" ]]
904	then
905	column1="make options:"; column2=$make_options
906	printf "\| $column1$column2 \| \n"
907	fi
908	column1="cpp options:"; column2=$cpp_options
909	printf "\| $column1$column2 \| \n"
910	line=$(echo "$cpp_options" \| cut -c51-)
911	while [[ "$line" != "" ]]
912	do
913	column1=""
914	column2=$line
915	printf "\| $column1$column2 \| \n"
916	line=$(echo "$line" \| cut -c51-)
917	done
918	column1="compiler options:"; column2=$compiler_options
919	printf "\| $column1$column2 \| \n"
920	line=$(echo "$compiler_options" \| cut -c51-)
921	while [[ "$line" != "" ]]
922	do
923	column1=""
924	column2=$line
925	printf "\| $column1$column2 \| \n"
926	line=$(echo "$line" \| cut -c51-)
927	done
928	column1="loader options:"; column2=$loader_options
929	printf "\| $column1$column2 \| \n"
930	line=$(echo "$loader_options" \| cut -c51-)
931	while [[ "$line" != "" ]]
932	do
933	column1=""
934	column2=$line
935	printf "\| $column1$column2 \| \n"
936	line=$(echo "$line" \| cut -c51-)
937	done
938	if [[ $modules != "" ]]
939	then
940	column1="modules to be load:"; column2=$modules
941	printf "\| $column1$column2 \| \n"
942	line=$(echo "$modules" \| cut -c51-)
943	while [[ "$line" != "" ]]
944	do
945	column1=""
946	column2=$line
947	printf "\| $column1$column2 \| \n"
948	line=$(echo "$line" \| cut -c51-)
949	done
950	fi
951	printf "#------------------------------------------------------------------------# \n"
952
953	if [[ $silent = false ]]
954	then
955	answer=dummy
956	printf "\n\n"
957	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
958	do
959	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
960	read answer
961	done
962	if [[ $answer = a \|\| $answer = A ]]
963	then
964	locat=user_abort; exit
965	fi
966	if [[ $answer = c \|\| $answer = C ]]
967	then
968	silent=true
969	fi
970	if [[ $answer = s \|\| $answer = S ]]
971	then
972	continue
973	fi
974	fi
975
976
977	# make on remote host
978	if [[ $remote_host != $local_host ]]
979	then
980
981	if [[ $compile_utility_programs = false ]]
982	then
983
984	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
985	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
986	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
987	if [[ $remote_host != lctit ]]
988	then
989	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
990	else
991	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
992	# MIT SSH, DESHALB AUFRUF PER PIPE
993	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
994	fi
995	if [[ $local_host = decalpha ]]
996	then
997	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
998	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
999	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1000	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1001	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1002	else
1003	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1004	fi
1005
1006
1007
1008	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1009	echo " *** untar previous update on remote host, if existing"
1010	if [[ $remote_host != lctit ]]
1011	then
1012	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1013	else
1014	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1015	# MIT SSH, DESHALB AUFRUF PER PIPE
1016	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1017	fi
1018
1019
1020	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1021	echo " *** untar actual sources on remote host"
1022	if [[ $remote_host != lctit ]]
1023	then
1024	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1025	else
1026	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1027	# MIT SSH, DESHALB AUFRUF PER PIPE
1028	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1029	fi
1030
1031
1032	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1033	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1034	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1035	# Z.B. DIE PFADE ZUM COMPILER)
1036	echo " *** execute \"make\" on remote host"
1037
1038
1039	# generate make call with make options
1040	if [[ $remote_host = nech ]]
1041	then
1042	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1043	else
1044	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1045	fi
1046
1047	# generate command to load modules, if modules are given
1048	if [[ "$modules" != "" ]]
1049	then
1050	if [[ $remote_host = lctit ]]
1051	then
1052	module_calls=". $modules"
1053	else
1054	module_calls="module load ${modules};"
1055	fi
1056
1057	# bugfix for wrong netcdf module
1058	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1059	then
1060	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1061	then
1062	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1063	fi
1064	fi
1065	else
1066	module_calls=""
1067	fi
1068
1069	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1070	then
1071
1072	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1073
1074	elif [[ $remote_host = ibmh ]]
1075	then
1076
1077	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1078
1079	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1080	then
1081
1082	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1083	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1084
1085	elif [[ $remote_host = lctit ]]
1086	then
1087
1088	echo " " > ${remote_host}_last_make_protokoll
1089	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1090	do
1091	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1092	done
1093
1094	elif [[ $remote_host = lcxt4 ]]
1095	then
1096
1097	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1098
1099	else
1100
1101	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1102
1103	fi
1104
1105	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1106	then
1107	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1108	if [[ $silent = false ]]
1109	then
1110	answer=dummy
1111	printf "\n"
1112	while [[ "$answer" != c && "$answer" != k ]]
1113	do
1114	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1115	read answer
1116	if [[ "$answer" = l ]]
1117	then
1118	more ${remote_host}_last_make_protokoll
1119	fi
1120	done
1121	if [[ $answer = k ]]
1122	then
1123	locat=user_abort; exit
1124	fi
1125	fi
1126	fi
1127
1128
1129
1130	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1131	printf "\n *** tar update on remote host ..."
1132	if [[ $remote_host != lctit ]]
1133	then
1134	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1135	else
1136	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1137	# MIT SSH, DESHALB AUFRUF PER PIPE
1138	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1139	fi
1140
1141
1142	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1143	# printf "\n *** \"make clean\" on remote host ..."
1144	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1145	# printf "\n"
1146
1147
1148
1149
1150	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1151	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1152	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1153	elif [[ $compile_utility_programs = true ]]
1154	then
1155
1156	printf "\n\n"
1157	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1158	cd ${local_source_path}/../SCRIPTS
1159
1160	if [[ $remote_host != lctit ]]
1161	then
1162	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1163	else
1164	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1165	# MIT SSH, DESHALB AUFRUF PER PIPE
1166	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1167	fi
1168
1169	# KOPIEREN DER SCRIPTE
1170	if [[ $local_host = decalpha ]]
1171	then
1172	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1173	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1174	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1175	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1176	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1177	else
1178	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1179	fi
1180
1181	cd - > /dev/null
1182	cd ${local_source_path}/../UTIL
1183
1184
1185	# KOPIEREN DER UTILITY-PROGRAMME
1186	if [[ $local_host = decalpha ]]
1187	then
1188	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1189	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1190	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1191	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1192	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1193	else
1194	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1195	fi
1196
1197
1198
1199	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1200	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1201	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1202	# Z.B. DIE PFADE ZUM COMPILER)
1203	echo " *** execute \"make\" on remote host"
1204
1205	if [[ $remote_host = nech ]]
1206	then
1207	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1208	else
1209	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1210	fi
1211
1212	# generate command to load modules, if modules are given
1213	if [[ "$modules" != "" ]]
1214	then
1215	if [[ $remote_host = lctit ]]
1216	then
1217	module_calls=". $modules"
1218	else
1219	module_calls="module load ${modules};"
1220	fi
1221
1222	# bugfix for wrong netcdf module
1223	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1224	then
1225	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1226	then
1227	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1228	fi
1229	fi
1230	else
1231	module_calls=""
1232	fi
1233
1234	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1235	then
1236
1237	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1238
1239	elif [[ $remote_host = ibmh ]]
1240	then
1241
1242	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1243
1244	elif [[ $remote_host = lctit ]]
1245	then
1246
1247	echo " " > ${remote_host}_last_make_protokoll
1248	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1249	do
1250	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1251	done
1252
1253	elif [[ $remote_host = lcxt4 ]]
1254	then
1255
1256	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1257
1258	else
1259
1260	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1261
1262	fi
1263
1264	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1265
1266	rm -rf ${remote_host}_last_make_protokoll
1267
1268	# make on local host
1269	else
1270
1271	# workaround for lcxt4
1272	if [[ $remote_host = lcxt4 ]]
1273	then
1274	. /opt/modules/default/init/ksh
1275	fi
1276
1277	# first load modules, if given
1278	if [[ "$modules" != "" ]]
1279	then
1280	if [[ $remote_host = lctit ]]
1281	then
1282	. $modules
1283	else
1284	module load ${modules}
1285	fi
1286	fi
1287
1288
1289	if [[ $compile_utility_programs = false ]]
1290	then
1291
1292	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1293	eval remote_md=$remote_md
1294	if [[ ! -d $remote_md ]]
1295	then
1296	if mkdir $remote_md
1297	then
1298	printf "\n\n *** directory for make depository:"
1299	printf "\n $remote_md"
1300	printf "\n was created\n"
1301	else
1302	printf "\n +++ directory for make depository:"
1303	printf "\n $remote_md"
1304	printf "\n cannot be created"
1305	locat=local_depository_path; exit
1306	fi
1307	fi
1308
1309	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1310	echo " "
1311	echo " *** updating sources in $remote_md"
1312	cd $remote_md
1313	cp $local_source_path/${mainprog}_sources.tar .
1314	tar xf ${mainprog}_sources.tar
1315
1316	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1317	echo " "
1318	echo " *** execute \"make\" on local host"
1319
1320	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1321
1322	if [[ $? != 0 ]]
1323	then
1324	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1325	if [[ $silent = false ]]
1326	then
1327	answer=dummy
1328	printf "\n"
1329	while [[ "$answer" != c && "$answer" != k ]]
1330	do
1331	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1332	read answer
1333	if [[ "$answer" = l ]]
1334	then
1335	more ${remote_host}_last_make_protokoll
1336	fi
1337	done
1338	if [[ $answer = k ]]
1339	then
1340	locat=user_abort; exit
1341	fi
1342	fi
1343	fi
1344
1345
1346	# TAR NEW VERSION ON LOCAL HOST
1347	printf "\n *** tar update on local host ..."
1348	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1349
1350
1351	# COMPILE THE UTILITY PROGRAMS
1352	elif [[ $compile_utility_programs = true ]]
1353	then
1354	printf "\n\n"
1355	echo " *** compiling the utility programs ..."
1356	cd ${local_source_path}/../UTIL
1357
1358	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1359	touch *.f90
1360	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1361	cd - > /dev/null
1362	fi
1363
1364	fi
1365
1366	done
1367
1368
1369	if [[ $host_found = false ]]
1370	then
1371	if [[ $host = all ]]
1372	then
1373	printf "\n +++ no hosts found in configuration file"
1374	else
1375	printf "\n +++ host \"$host\" not found in configuration file"
1376	fi
1377	locat=config_file; exit
1378	fi
1379
1380
1381
1382	# FINAL WORK
1383	rm -f hosts_found_in_config_file
1384

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |