Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 59

Last change on this file since 59 was 54, checked in by raasch, 18 years ago
property Id set for most of all files, small bug in mbuild fixed
Property svn:keywords set to `Id`
File size: 54.7 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript Version: @(#)MBUILD 2.0 08/03/07
3	# $Id: mbuild 54 2007-03-08 00:00:02Z raasch $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84
85
86
87	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
88	compile_utility_programs=false
89	config_file=.mrun.config
90	host=all
91	host_found=false
92	ibm_hb_done=false
93	lcmuk_done=false
94	locat=normal
95	makefile=""
96	remote_mode=interactive
97	scirocco=false
98	silent=false
99	suf=f90
100	update=false
101
102	typeset -i ih ihost=0
103
104	typeset -R50 calltime
105	typeset -L20 column1
106	typeset -L50 column2
107	typeset -L70 column3
108	typeset -L20 version="MBUILD 2.0"
109
110	# FEHLERBEHANDLUNG
111	# BEI EXIT:
112	trap 'if [[ $locat != normal ]]
113	then
114	printf "\n\n +++ mbuild killed \n\n"
115	else
116	printf "\n\n *** mbuild finished \n\n"
117	fi' exit
118
119
120	# BEI TERMINAL-BREAK:
121	trap 'printf "\n\n +++ mbuild killed by \"^C\" \n\n"
122	exit
123	' 2
124
125
126
127	# SHELLSCRIPT-OPTIONEN EINLESEN
128	while getopts :c:h:m:rs:u option
129	do
130	case $option in
131	(c) config_file=$OPTARG;;
132	(h) host=$OPTARG;;
133	(m) makefile=$OPTARG;;
134	(r) remote_mode=batch;;
135	(s) suf=$OPTARG;;
136	(u) compile_utility_programs=true;;
137	(\?) printf "\n +++ unknown option $OPTARG \n";
138	locat=parameter; exit;;
139	esac
140	done
141
142
143
144	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
145	if [[ $remote_mode = batch ]]
146	then
147	printf "\n +++ sorry, batch mode does not work! \n"
148	locat=parameter; exit
149	fi
150
151
152
153	# LOKALEN RECHNER ERMITTELN
154	local_host_real_name=$(hostname)
155	local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
156	case $local_host_real_name in
157	(atmos) local_host=lcide;;
158	(berte) local_host=t3eb;;
159	(bora\|breva\|gregale\|irifi\|levanto\|maestro\|orkan\|ostria\|quanero\|scirocco) local_host=lcmuk;;
160	(gate) local_host=neck;;
161	(gfdl3.yonsei.ac.kr) local_host=decalpha; local_addres=165.132.26.56;;
162	(gfdl5) local_host=ibmy; local_addres=165.132.26.58;;
163	(gwdk081.gwdg.de) local_host=ibm;;
164	(hreg01a-en0\|hreg02a-en0) local_host=ibmh;;
165	(nobel\|nobela) local_host=ibms;;
166	(tgg*) local_host=lctit;;
167	(t3e) local_host=t3eh;;
168	(zam003) local_host=t3ej2;;
169	(zam005) local_host=t3ej5;;
170	(*) printf "\n +++ local host \"$local_host_real_name\" not admitted for mbuild \n"
171	locat=local_host; exit;;
172	esac
173
174	[[ $local_host_real_name = scirocco ]] && scirocco=true
175
176
177
178	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
179	if [[ ! -f $config_file ]]
180	then
181	printf "\n +++ configuration file: "
182	printf "\n $config_file"
183	printf "\n does not exist"
184	locat=configuration; exit
185	fi
186	if [[ $local_host != ibms ]]
187	then
188	config_file=$PWD/$config_file
189	else
190	config_file=`pwd`/$config_file
191	fi
192
193
194
195	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
196	line=""
197	grep " $local_host" $config_file \| grep "%remote_username" \| while read line
198	do
199	if [[ "$line" != "" \|\| $(echo $line \| cut -c1) != "#" ]]
200	then
201	local_username=`echo $line \| cut -d" " -s -f2`
202	fi
203	done
204
205	if [[ "$local_username" = "" ]]
206	then
207	printf "\n +++ no user name found in configuration file"
208	printf "\n for local host \"$local_host\" "
209	locat=config_file; exit
210	fi
211
212
213	# LOKALEN QUELLTEXTPFAD ERMITTELN.
214	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
215	# VEREINBART WURDE.
216	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
217	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
218	line=""
219	grep "%" $config_file \| while read line
220	do
221	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" ]]
222	then
223	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
224	value=`echo $line \| cut -d" " -s -f2`
225	eval export $var=\$value
226	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
227	fi
228	done
229
230	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
231	line=""
232	grep "%source_path" $config_file \| while read line
233	do
234	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
235	then
236	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
237	then
238	global_source_path=`echo $line \| cut -d" " -s -f2`
239	fi
240	fi
241	done
242
243	line=""
244	grep " $local_host" $config_file \| grep "%source_path" \| while read line
245	do
246	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
247	then
248	local_source_path=`echo $line \| cut -d" " -s -f2`
249	fi
250	done
251
252	if [[ "$local_source_path" = "" ]]
253	then
254	if [[ "$global_source_path" != "" ]]
255	then
256	local_source_path=$global_source_path
257	else
258	printf "\n +++ no source path found in configuration file"
259	printf "\n for local host \"$local_host\" "
260	printf "\n please set \"\%source_path\" in configuration file"
261	locat=config_file; exit
262	fi
263	fi
264	eval local_source_path=$local_source_path
265	eval local_source_path=$local_source_path
266
267
268	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
269	line=""
270	grep "%depository_path" $config_file \| while read line
271	do
272	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
273	then
274	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
275	then
276	global_depository_path=`echo $line \| cut -d" " -s -f2`
277	fi
278	fi
279	done
280
281	line=""
282	grep " $local_host" $config_file \| grep "%depository_path" \| while read line
283	do
284	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
285	then
286	local_depository_path=`echo $line \| cut -d" " -s -f2`
287	fi
288	done
289
290	if [[ "$local_depository_path" = "" ]]
291	then
292	if [[ "$global_depository_path" != "" ]]
293	then
294	local_depository_path=$global_depository_path
295	else
296	printf "\n +++ no depository path found in configuration file"
297	printf "\n for local host \"$local_host\" "
298	printf "\n please set \"\%depository_path\" in configuration file"
299	locat=config_file; exit
300	fi
301	fi
302	eval local_depository_path=$local_depository_path
303	eval local_depository_path=$local_depository_path
304
305
306
307	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
308	# VEREINBART WURDE
309	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
310	then
311	printf "\n +++ no main program or more than one main program defined"
312	printf "\n in configuration file"
313	locat=configuration; exit
314	else
315	line=`grep "%mainprog" $config_file`
316	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
317	then
318	printf "\n +++ no main program defined in configuration file"
319	locat=configuration; exit
320	fi
321	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
322	fi
323
324
325
326	# MAKEFILE vorhanden
327	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
328	if [[ ! -f $makefile ]]
329	then
330	printf "\n +++ makefile: "
331	printf "\n $makefile"
332	printf "\n does not exist"
333	locat=makefile; exit
334	fi
335
336
337	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
338	calltime=$(date)
339	printf "\n"
340	printf "#------------------------------------------------------------------------# \n"
341	printf "\| $version$calltime \| \n"
342	printf "\| \| \n"
343	column1="called on:"; column2=$local_host_real_name
344	printf "\| $column1$column2 \| \n"
345	column1="local username:"; column2=$local_username
346	printf "\| $column1$column2 \| \n"
347	column1="local IP-addres:"; column2=$local_addres
348	printf "\| $column1$column2 \| \n"
349	column1="config file:"; column2=$config_file
350	printf "\| $column1$column2 \| \n"
351	column1="makefile:"; column2=$makefile
352	printf "\| $column1$column2 \| \n"
353	column1="local source path:"; column2=$local_source_path
354	printf "\| $column1$column2 \| \n"
355	column1="make depository:"; column2=$local_depository_path
356	printf "\| $column1$column2 \| \n"
357	printf "#------------------------------------------------------------------------# \n"
358
359	# printf "\| \| \n"
360
361
362	if [[ $compile_utility_programs = false ]]
363	then
364
365	cd $local_source_path
366
367
368	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
369	source_code_files=`ls -1 *.$suf`
370
371
372
373	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
374	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
375	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
376	if [[ ! -d $local_depository_path ]]
377	then
378	if mkdir $local_depository_path
379	then
380	printf "\n\n *** directory for make depository:"
381	printf "\n $local_depository_path"
382	printf "\n was created\n"
383
384	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
385	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
386	printf "\n *** makefile and source code files are copied to"
387	printf "\n $local_depository_path\n"
388	printf "\n copying makefile \"$makefile\" ..."
389	cp -p $makefile $local_depository_path/Makefile
390
391	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
392	# SEIN
393	for filename in $source_code_files
394	do
395	if [[ $(grep -c $filename $makefile) = 0 ]]
396	then
397	printf "\n +++ source code file:"
398	printf "\n $filename"
399	printf "\n is not listed in makefile"
400	locat=makefile; exit
401	else
402	printf "\n copying source code file \"$filename\" ..."
403	cp -p $filename $local_depository_path
404	fi
405	done
406	printf "\n"
407	else
408	printf "\n +++ directory for make depository:"
409	printf "\n $local_depository_path"
410	printf "\n cannot be created"
411	locat=local_depository_path; exit
412	fi
413	else
414
415	printf "\n *** checking file status ..."
416
417	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
418	if [[ $makefile -nt $local_depository_path/Makefile ]]
419	then
420	printf "\n *** update of \"$makefile\" "
421	cp -f -p $makefile $local_depository_path/Makefile
422	update=true
423
424	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
425	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
426	cd $local_depository_path
427	source_code_files_in_depository=`ls -1 *.$suf`
428	for filename in $source_code_files_in_depository
429	do
430	if [[ $(grep -c $filename Makefile) = 0 ]]
431	then
432	printf "\n *** source code file in \"$local_depository_path\":"
433	printf "\n $filename"
434	printf "\n is not listed in makefile"
435	if [[ $silent = false ]]
436	then
437	answer=dummy
438	printf "\n\n"
439	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
440	do
441	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
442	read answer
443	done
444	if [[ $answer = y \|\| $answer = Y ]]
445	then
446	base=`echo $filename \| cut -d. -f2`
447	rm -f $filename
448	rm -f ${base}.o ${base}.mod
449	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
450	else
451	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
452	fi
453	fi
454	fi
455	done
456	cd - > /dev/null 2>&1
457
458	elif [[ $local_depository_path/Makefile -nt $makefile ]]
459	then
460	printf "\n *** makefile in depository is newer than"
461	printf "\n \"$makefile\" "
462	if [[ $silent = false ]]
463	then
464	answer=dummy
465	printf "\n\n"
466	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
467	do
468	printf " >>> update \"$makefile\" (y/n) ? "
469	read answer
470	done
471	if [[ $answer = y \|\| $answer = Y ]]
472	then
473	cp -f -p $local_depository_path/Makefile $makefile
474	printf "\n *** \"$makefile\" updated"
475	else
476	printf "\n *** \"$makefile\" not updated"
477	fi
478	fi
479	fi
480
481	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
482	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
483	for filename in $source_code_files
484	do
485	if [[ $(grep -c $filename $makefile) = 0 ]]
486	then
487	printf "\n +++ source code file:"
488	printf "\n $filename"
489	printf "\n is not listed in makefile"
490	locat=makefile; exit
491	else
492	if [[ ! -f $local_depository_path/$filename ]]
493	then
494	cp -p $filename $local_depository_path
495	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
496	fi
497	if [[ $filename -nt $local_depository_path/$filename ]]
498	then
499	printf "\n *** update of source code file \"$filename\" "
500	cp -f -p $filename $local_depository_path
501	update=true
502	fi
503	fi
504	done
505
506
507	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
508	# ODER EVTL. NEUEREN DATUMS SIND
509	cd $local_depository_path
510	source_code_files_in_depository=`ls -1 *.$suf`
511	cd - > /dev/null 2>&1
512	for filename in $source_code_files_in_depository
513	do
514	if [[ ! -f $filename ]]
515	then
516	printf "\n *** source code file \"$filename\" does not exist in current directory"
517	if [[ $silent = false ]]
518	then
519	answer=dummy
520	printf "\n\n"
521	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
522	do
523	printf " >>> create \"$filename\" in current directory (y/n) ? "
524	read answer
525	done
526	if [[ $answer = y \|\| $answer = Y ]]
527	then
528	cp -p $local_depository_path/$filename $filename
529	printf "\n *** source code file \"$filename\" created in current directory"
530	else
531	printf "\n *** source code file \"$filename\" not created in current directory"
532	fi
533	fi
534	elif [[ $local_depository_path/$filename -nt $filename ]]
535	then
536	ls -al $local_depository_path/$filename
537	ls -al $filename
538	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
539	if [[ $silent = false ]]
540	then
541	answer=dummy
542	printf "\n\n"
543	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
544	do
545	printf " >>> update \"$filename\" in current directory (y/n) ? "
546	read answer
547	done
548	if [[ $answer = y \|\| $answer = Y ]]
549	then
550	cp -f -p $local_depository_path/$filename $filename
551	printf "\n *** source code file \"$filename\" updated in current directory"
552	else
553	printf "\n *** source code file \"$filename\" not updated in current directory"
554	fi
555	fi
556	fi
557	done
558
559	if [[ $update = false ]]
560	then
561	printf "\n *** no updates necessary in \"$local_depository_path\" "
562	if [[ $silent = false ]]
563	then
564	answer=dummy
565	printf "\n\n"
566	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
567	do
568	printf " >>> continue with updates on remote hosts (y/n) ? "
569	read answer
570	done
571	if [[ $answer = n \|\| $answer = N ]]
572	then
573	locat=user_abort; exit
574	fi
575	fi
576	fi
577	fi
578
579
580
581	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
582	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
583	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
584	printf "\n\n *** tar of makefile and source files in depository ..."
585	cd $local_depository_path
586	chmod u+w Makefile *.$suf
587	tar -cf ${mainprog}_sources.tar Makefile *.$suf
588	printf "\n"
589
590	fi
591
592
593
594	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
595	if [[ $host = all ]]
596	then
597	printf "\n *** updates will be made for ALL hosts found in"
598	printf "\n the configuration file"
599	else
600	printf "\n *** update will be made for host \"$host\" "
601	fi
602
603	if [[ $silent = false ]]
604	then
605	answer=dummy
606	printf "\n\n"
607	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
608	do
609	printf " >>> continue (y/n) ? "
610	read answer
611	done
612	if [[ $answer = n \|\| $answer = N ]]
613	then
614	locat=user_abort; exit
615	fi
616	fi
617
618
619
620
621	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
622	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
623	printf "\n *** scanning configuration file for host(s) ..."
624
625	grep %fopts $config_file \| while read line
626	do
627	# KOMMENTARZEILEN UEBERSPRINGEN
628	[[ $(echo $line \| cut -c1) = "#" ]] && continue
629	(( ihost = ihost + 1 ))
630	hostline[$ihost]="$line"
631	done
632
633
634	while (( ih < ihost ))
635	do
636
637	(( ih = ih + 1 ))
638
639	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
640	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
641	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
642	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
643	remote_host=`echo $remote_host_string \| cut -d" " -f1`
644	if [[ $host != all ]]
645	then
646	[[ $remote_host != $host ]] && continue
647	fi
648	host_found=true
649	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
650	if [[ $condition1 = $remote_host ]]
651	then
652	condition1=""
653	else
654	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
655	fi
656
657
658	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
659	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
660	then
661	if [[ $ibm_hb_done = true ]]
662	then
663	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
664	printf "\n been carried out on one of the HLRN machines\n"
665	continue
666	fi
667	fi
668
669	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
670	if [[ $remote_host = lcmuk ]]
671	then
672	if [[ $lcmuk_done = true ]]
673	then
674	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
675	printf "\n been carried out on this host\n"
676	continue
677	fi
678	fi
679
680
681	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
682	netcdf_support=false
683	case $remote_host in
684	(lcmuk) remote_addres=130.75.105.3; cpp_options=""
685	netcdf_support=true
686	if [[ $scirocco = true ]]
687	then
688	netcdf_path=/opt/netcdf/3.6.2-beta4
689	else
690	netcdf_path=/muksoft/packages/netcdf/linux
691	fi;;
692	(lctit) remote_addres=172.17.75.161; netcdf_support=true
693	netcdf_path=/home/usr5/mkanda/netcdf-3.6.1/src; cpp_options="-Mpreprocess";;
694	(decalpha) remote_addres=165.132.26.56; cpp_options="-cpp"; netcdf_support=true
695	netcdf_path=/usr/local/netcdf-3.5.1;;
696	(ibm) remote_addres=134.76.99.81; cpp_options="-qsuffix=cpp=f90";;
697	(ibmb) remote_addres=130.73.230.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
698	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
699	(ibmh) remote_addres=130.75.4.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
700	netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
701	(ibms) remote_addres=150.183.5.101; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
702	netcdf_path=/applic/lib/NETCDF64;;
703	(ibmy) remote_addres=165.132.26.58; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
704	netcdf_path=/usr1/users/raasch/pub/netcdf-3.6.0-p1;;
705	(nech) remote_addres=136.172.44.192; cpp_options="-Ep"; netcdf_support=true
706	netcdf_path=/pool/SX-6/netcdf/netcdf-3.6.0-p1;;
707	(neck) remote_addres=133.5.178.11; cpp_options="-Ep"; netcdf_support=true
708	netcdf_path=/home/DSRC/NC/tatuyama/pub/netcdf-3.6.0-p1;;
709	(t3eb) remote_addres=130.73.206.21; cpp_options="-eZ";;
710	(t3eh) remote_addres=130.75.4.131; cpp_options="-eZ";;
711	(t3ej2) remote_addres=134.94.100.22; cpp_options="-eZ";;
712	(t3ej5) remote_addres=134.94.100.49; cpp_options="-eZ";;
713	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
714	(*) printf "\n +++ remote host \"$remote_host\" unknown";
715	printf "\n please inform S. Raasch!";
716	locat=config_file; exit;;
717	esac
718
719
720	# REMOTE-USERNAMEN ERMITTELN
721	line=""
722	grep "$remote_host_string" $config_file \| grep "%remote_username" \| while read line1
723	do
724	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
725	then
726	line="$line1"
727	fi
728	done
729
730	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
731	then
732	printf "\n +++ no remote username found in configuration file"
733	printf "\n for \"$remote_host_string\" "
734	locat=config_file; exit
735	else
736	remote_username=`echo $line \| cut -d" " -s -f2`
737	fi
738
739
740	# REMOTE-QUELLTEXTPFAD ERMITTELN
741	line=""
742	remote_source_path=""
743	grep "$remote_host_string" $config_file \| grep "%source_path" \| while read line1
744	do
745	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
746	then
747	line="$line1"
748	fi
749	done
750
751	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
752	then
753	remote_source_path=`echo $line \| cut -d" " -s -f2`
754	fi
755	if [[ "$remote_source_path" = "" ]]
756	then
757	if [[ "$global_source_path" != "" ]]
758	then
759	remote_source_path=$global_source_path
760	else
761	printf "\n +++ no source path found in configuration file"
762	printf "\n for \"$remote_host_string\" "
763	locat=config_file; exit
764	fi
765	fi
766
767	remote_ud=${remote_source_path}/../UTIL
768	remote_ud=$(eval echo $remote_ud)
769
770
771	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
772	remote_md=""
773	line=""
774	grep "$remote_host_string" $config_file \| grep "%depository_path" \| while read line1
775	do
776	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
777	then
778	line="$line1"
779	fi
780	done
781
782	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
783	then
784	remote_md=`echo $line \| cut -d" " -s -f2`
785	fi
786	if [[ "$remote_md" = "" ]]
787	then
788	if [[ "$global_depository_path" != "" ]]
789	then
790	remote_md=$global_depository_path
791	else
792	printf "\n +++ no depository path found in configuration file"
793	printf "\n for \"$remote_host_string\" "
794	printf "\n please set \"\%depository_path\" in configuration file"
795	locat=config_file; exit
796	fi
797	fi
798
799	remote_md=$(eval echo $remote_md)
800
801
802	# COMPILERNAMEN ERMITTELN
803	line=""
804	grep "$remote_host_string" $config_file \| grep "%compiler_name " \| while read line1
805	do
806	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
807	then
808	line="$line1"
809	fi
810	done
811
812	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
813	then
814	printf "\n +++ no compiler name found in configuration file"
815	printf "\n for \"$remote_host_string\" "
816	locat=config_file; exit
817	else
818	compiler_name=`echo $line \| cut -d" " -s -f2`
819	fi
820
821
822	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
823	# SERIELLER COMPILERNAME ERMITTELT WERDEN
824	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
825	then
826	line=""
827	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" \| while read line1
828	do
829	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
830	then
831	line="$line1"
832	fi
833	done
834
835	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
836	then
837	printf "\n +++ no serial compiler name found in configuration file"
838	printf "\n for \"$remote_host_string\" "
839	locat=config_file; exit
840	else
841	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
842	fi
843	else
844	compiler_name_ser=$compiler_name
845	fi
846
847
848
849	# PRAEPROZESSOR-DIREKTIVEN SETZEN
850	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
851	then
852	if [[ $remote_host = ibms ]]
853	then
854	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
855	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf"
856	else
857	cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
858	[[ $netcdf_support = true ]] && cpp_options="${cpp_options},-D__netcdf,-D__netcdf_64bit"
859	[[ $remote_host = ibmy ]] && cpp_options="${cpp_options},-D__ibmy_special"
860	fi
861	elif [[ $remote_host = lcmuk ]]
862	then
863	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
864	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
865	elif [[ $remote_host = lctit ]]
866	then
867	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
868	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
869	elif [[ $remote_host = decalpha ]]
870	then
871	cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
872	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf"
873	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
874	then
875	cpp_options="$cpp_options -DMPI_REAL=MPI_REAL8 -DMPI_2REAL=MPI_2REAL8 -DSCFFT=DZFFT -DCSFFT=ZDFFT"
876	[[ $netcdf_support = true ]] && cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
877	fi
878
879	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
880	then
881	for string in $remote_host_string
882	do
883	if [[ $(echo $string \| cut -c1-3) = ibm ]]
884	then
885	cpp_options="${cpp_options},-D__ibm"
886	if [[ $remote_host = ibmy ]]
887	then
888	cpp_options="${cpp_options},-D__ibmy_special"
889	fi
890	else
891	cpp_options="${cpp_options},-D__$string"
892	fi
893	done
894	cpp_options="$cpp_options "
895	elif [[ $remote_host = nech \|\| $remote_host = neck ]]
896	then
897	for string in $remote_host_string
898	do
899	if [[ $(echo $string \| cut -c1-3) = nec ]]
900	then
901	cpp_options="${cpp_options} -D__nec"
902	else
903	cpp_options="${cpp_options} -D__$string"
904	fi
905	done
906	cpp_options="$cpp_options "
907	else
908	for string in $remote_host_string
909	do
910	cpp_options="$cpp_options -D__$string "
911	done
912	fi
913
914
915	# COMPILEROPTIONEN ERMITTELN
916	line=""
917	grep "$remote_host_string" $config_file \| grep "%fopts" \| while read line1
918	do
919	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
920	then
921	line="$line1"
922	fi
923	done
924	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
925	then
926	printf "\n +++ no compiler options found in configuration file"
927	printf "\n for \"$remote_host_string\" "
928	locat=config_file; exit
929	else
930	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
931	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
932	fi
933	if [[ $netcdf_support = true ]]
934	then
935	case $remote_host in
936	(decalpha) compiler_options="-I${netcdf_path}/include $compiler_options";;
937	(ibmb\|ibmh) compiler_options="-I ${netcdf_path}/include-64 $compiler_options";;
938	(ibms) compiler_options="-I /applic/netcdf64/src/f90 $compiler_options";;
939	(ibmy) compiler_options="-I ${netcdf_path}/include $compiler_options";;
940	(lcmuk) compiler_options="-I ${netcdf_path}/include $compiler_options";;
941	(lctit) compiler_options="-I ${netcdf_path}/f90 $compiler_options";;
942	(nech\|neck) compiler_options="-I ${netcdf_path}/include $compiler_options";;
943	esac
944	fi
945
946
947
948	# LADER-OPTIONEN ERMITTELN
949	line=""
950	grep "$remote_host_string" $config_file \| grep "%lopts" \| while read line1
951	do
952	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
953	then
954	line="$line1"
955	fi
956	done
957
958	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
959	then
960	printf "\n +++ no loader options found in configuration file"
961	printf "\n for \"$remote_host_string\" "
962	locat=config_file; exit
963	else
964	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
965	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
966	fi
967	if [[ $netcdf_support = true ]]
968	then
969	case $remote_host in
970	(decalpha) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
971	(ibmb\|ibmh\|lcmuk\|nech\|neck) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
972	(ibms) loader_options="$loader_options -L${netcdf_path} -lnetcdf";;
973	(ibmy) loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
974	(lctit) loader_options="$loader_options -L${netcdf_path}/libsrc -lnetcdf";;
975	esac
976	fi
977
978
979	printf "\n\n#------------------------------------------------------------------------# \n"
980	if [[ $remote_host = $local_host ]]
981	then
982	column1="remote_host:"; column2="$remote_host (= local host!)"
983	else
984	column1="remote_host:"; column2=$remote_host
985	fi
986	printf "\| $column1$column2 \| \n"
987	printf "\| \| \n"
988	column1="conditions:"; column2="$condition1 $condition2"
989	printf "\| $column1$column2 \| \n"
990	column1="make depository:"; column2=$remote_md
991	printf "\| $column1$column2 \| \n"
992	if [[ $compile_utility_programs = true ]]
993	then
994	column1="utility directory:"; column2=$remote_ud
995	printf "\| $column1$column2 \| \n"
996	fi
997	column1="username:"; column2=$remote_username
998	printf "\| $column1$column2 \| \n"
999	column1="addres:"; column2=$remote_addres
1000	printf "\| $column1$column2 \| \n"
1001	column1="compiler:"; column2=$compiler_name
1002	printf "\| $column1$column2 \| \n"
1003	if [[ $compile_utility_programs = true ]]
1004	then
1005	column1="serial compiler:"; column2=$compiler_name_ser
1006	printf "\| $column1$column2 \| \n"
1007	fi
1008	column1="cpp options:"; column2=$cpp_options
1009	printf "\| $column1$column2 \| \n"
1010	line=$(echo "$cpp_options" \| cut -c51-)
1011	while [[ "$line" != "" ]]
1012	do
1013	column1=""
1014	column2=$line
1015	printf "\| $column1$column2 \| \n"
1016	line=$(echo "$line" \| cut -c51-)
1017	done
1018	column1="compiler options:"; column2=$compiler_options
1019	printf "\| $column1$column2 \| \n"
1020	line=$(echo "$compiler_options" \| cut -c51-)
1021	while [[ "$line" != "" ]]
1022	do
1023	column1=""
1024	column2=$line
1025	printf "\| $column1$column2 \| \n"
1026	line=$(echo "$line" \| cut -c51-)
1027	done
1028	column1="loader options:"; column2=$loader_options
1029	printf "\| $column1$column2 \| \n"
1030	line=$(echo "$loader_options" \| cut -c51-)
1031	while [[ "$line" != "" ]]
1032	do
1033	column1=""
1034	column2=$line
1035	printf "\| $column1$column2 \| \n"
1036	line=$(echo "$line" \| cut -c51-)
1037	done
1038	printf "#------------------------------------------------------------------------# \n"
1039
1040	if [[ $silent = false ]]
1041	then
1042	answer=dummy
1043	printf "\n\n"
1044	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1045	do
1046	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1047	read answer
1048	done
1049	if [[ $answer = a \|\| $answer = A ]]
1050	then
1051	locat=user_abort; exit
1052	fi
1053	if [[ $answer = c \|\| $answer = C ]]
1054	then
1055	silent=false
1056	fi
1057	if [[ $answer = s \|\| $answer = S ]]
1058	then
1059	continue
1060	fi
1061	fi
1062
1063
1064	if [[ $remote_mode = batch ]]
1065	then
1066
1067	# BATCH-JOB PARAMETER SETZEN
1068	case $remote_host in
1069	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1070	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
1071	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1072	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1073	esac
1074
1075
1076	# BATCH-JOB ZUSAMMENSTELLEN
1077	printf "\n *** creating batch-job for remote host"
1078	echo " " > mbuild_job
1079
1080	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1081	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1082	if [[ $remote_host = t3ej2 ]]
1083	then
1084	echo "set +vx" >> mbuild_job
1085	echo ". .profile" >> mbuild_job
1086	echo "set -x" >> mbuild_job
1087	fi
1088
1089	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1090	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
1091	then
1092	echo "module list" >> mbuild_job
1093	fi
1094
1095
1096	# WECHSEL IN TEMPORAERES VERZEICHNIS
1097	echo "cd ${remote_md}" >> mbuild_job
1098
1099
1100	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1101	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
1102	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
1103
1104
1105	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1106	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
1107
1108
1109	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1110	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
1111
1112
1113	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1114	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
1115	echo "chmod u+w *" >> mbuild_job
1116
1117	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1118	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
1119
1120
1121	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1122	echo "make clean" >> mbuild_job
1123	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1124	echo "rm *.f90 Makefile" >> mbuild_job
1125
1126
1127
1128	# JOB MITTELS SUBJOB STARTEN
1129	printf "\n *** sending batch job to remote host"
1130	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1131
1132
1133	# JOBFILE LOESCHEN
1134	# rm aljob
1135
1136	else
1137
1138	if [[ $remote_host != $local_host ]]
1139	then
1140
1141	if [[ $compile_utility_programs = false ]]
1142	then
1143
1144	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1145	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1146	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1147	if [[ $remote_host != lctit ]]
1148	then
1149	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1150	else
1151	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1152	# MIT SSH, DESHALB AUFRUF PER PIPE
1153	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1154	fi
1155	if [[ $local_host = decalpha ]]
1156	then
1157	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1158	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1159	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1160	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1161	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1162	else
1163	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1164	fi
1165
1166
1167
1168	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1169	echo " *** untar previous update on remote host, if existing"
1170	if [[ $remote_host != lctit ]]
1171	then
1172	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1173	else
1174	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1175	# MIT SSH, DESHALB AUFRUF PER PIPE
1176	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1177	fi
1178
1179
1180	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1181	echo " *** untar actual sources on remote host"
1182	if [[ $remote_host != lctit ]]
1183	then
1184	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1185	else
1186	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1187	# MIT SSH, DESHALB AUFRUF PER PIPE
1188	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1189	fi
1190
1191
1192	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1193	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1194	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1195	# Z.B. DIE PFADE ZUM COMPILER)
1196	echo " *** execute \"make\" on remote host"
1197
1198	if [[ $remote_host = nech ]]
1199	then
1200	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1201	else
1202	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1203	fi
1204
1205	if [[ $remote_host = t3eh ]]
1206	then
1207
1208	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1209
1210	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1211	then
1212
1213	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1214
1215	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1216	then
1217
1218	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1219
1220	elif [[ $remote_host = lctit ]]
1221	then
1222
1223	echo " " > ${remote_host}_last_make_protokoll
1224	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1225	do
1226	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1227	done
1228
1229	else
1230
1231	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1232
1233	fi
1234
1235	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1236	then
1237	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1238	if [[ $silent = false ]]
1239	then
1240	answer=dummy
1241	printf "\n"
1242	while [[ "$answer" != c && "$answer" != k ]]
1243	do
1244	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1245	read answer
1246	if [[ "$answer" = l ]]
1247	then
1248	more ${remote_host}_last_make_protokoll
1249	fi
1250	done
1251	if [[ $answer = k ]]
1252	then
1253	locat=user_abort; exit
1254	fi
1255	fi
1256	fi
1257
1258
1259
1260	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1261	printf "\n *** tar update on remote host ..."
1262	if [[ $remote_host != lctit ]]
1263	then
1264	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod"
1265	else
1266	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1267	# MIT SSH, DESHALB AUFRUF PER PIPE
1268	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1269	fi
1270
1271
1272	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1273	# printf "\n *** \"make clean\" on remote host ..."
1274	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1275	# printf "\n"
1276
1277
1278
1279
1280	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1281	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1282	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1283	elif [[ $compile_utility_programs = true ]]
1284	then
1285
1286	printf "\n\n"
1287	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1288	cd ${local_source_path}/../SCRIPTS
1289
1290	if [[ $remote_host != lctit ]]
1291	then
1292	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1293	else
1294	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1295	# MIT SSH, DESHALB AUFRUF PER PIPE
1296	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1297	fi
1298
1299	# KOPIEREN DER SCRIPTE
1300	if [[ $local_host = decalpha ]]
1301	then
1302	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1303	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1304	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1305	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1306	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1307	else
1308	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1309	fi
1310
1311	cd - > /dev/null
1312	cd ${local_source_path}/../UTIL
1313
1314
1315	# KOPIEREN DER UTILITY-PROGRAMME
1316	if [[ $local_host = decalpha ]]
1317	then
1318	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1319	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1320	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1321	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1322	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1323	else
1324	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1325	fi
1326
1327
1328
1329	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1330	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1331	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1332	# Z.B. DIE PFADE ZUM COMPILER)
1333	echo " *** execute \"make\" on remote host"
1334
1335	if [[ $remote_host = nech ]]
1336	then
1337	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1338	else
1339	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1340	fi
1341
1342	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1343	then
1344
1345	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1346
1347	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1348	then
1349
1350	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1351
1352	elif [[ $remote_host = lctit ]]
1353	then
1354
1355	echo " " > ${remote_host}_last_make_protokoll
1356	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1357	do
1358	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1359	done
1360
1361	else
1362
1363	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1364
1365	fi
1366
1367	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1368
1369
1370	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1371	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
1372
1373	else
1374
1375	if [[ $compile_utility_programs = false ]]
1376	then
1377
1378	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1379	echo " "
1380	echo " *** execute \"make\" on local host"
1381
1382	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1383
1384	if [[ $? != 0 ]]
1385	then
1386	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1387	if [[ $silent = false ]]
1388	then
1389	answer=dummy
1390	printf "\n"
1391	while [[ "$answer" != c && "$answer" != k ]]
1392	do
1393	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1394	read answer
1395	if [[ "$answer" = l ]]
1396	then
1397	more ${remote_host}_last_make_protokoll
1398	fi
1399	done
1400	if [[ $answer = k ]]
1401	then
1402	locat=user_abort; exit
1403	fi
1404	fi
1405	fi
1406
1407
1408	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1409	printf "\n *** tar update on local host ..."
1410	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1411
1412
1413	# COMPILE THE UTILITY PROGRAMS
1414	elif [[ $compile_utility_programs = true ]]
1415	then
1416	printf "\n\n"
1417	echo " *** compiling the utility programs ..."
1418	cd ${local_source_path}/../UTIL
1419	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1420	cd - > /dev/null
1421	fi
1422
1423
1424	# NUR EINMAL AUF LCMUK UEBERSETZEN
1425	[[ $remote_host = lcmuk ]] && lcmuk_done=true
1426
1427	fi
1428
1429	fi
1430	done
1431
1432
1433	if [[ $host_found = false ]]
1434	then
1435	if [[ $host = all ]]
1436	then
1437	printf "\n +++ no hosts found in configuration file"
1438	else
1439	printf "\n +++ host \"$host\" not found in configuration file"
1440	fi
1441	locat=config_file; exit
1442	fi
1443
1444
1445
1446	# ABSCHLIESSENDE ARBEITEN
1447	rm -f hosts_found_in_config_file
1448

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |