Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 369

Last change on this file since 369 was 367, checked in by maronga, 15 years ago
adapted for machine lck
Property svn:keywords set to `Id Rev`
File size: 48.4 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 367 2009-08-25 08:35:52Z raasch $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90	# from configuration file
91	# host identifier (local_host) is read from config file
92	# 10/10/07 - Siggi - bugfix: handling of comment lines
93	# 18/07/08 - Siggi - adapted for lcsgih
94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95	# ({mainprog}_current_version)
96	# 02/10/08 - Siggi - adapted for lcxt4
97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
98	# remains in source directory, one depository per block
99	# (given in the config-file) is created, allways all
100	# files from the source directory are copied to the
101	# respective depository, no additional file checks are
102	# done any more (version 2.1)
103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
104	# other machines)
105	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
106	# .dvrserver.config
107	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
108	# 25/08/09 - BjornM- adapted for lck
109
110
111
112	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
113	compile_utility_programs=false
114	config_file=.mrun.config
115	fimm=false
116	host=all
117	host_found=false
118	locat=normal
119	makefile=""
120	remote_mode=interactive
121	scirocco=false
122	silent=false
123	suf=f90
124	update=false
125	working_directory=`pwd`
126
127	typeset -i ih ihost=0
128
129	typeset -R30 calltime
130	typeset -L20 column1
131	typeset -L50 column2
132	typeset -L70 column3
133	typeset -L40 version="MBUILD 2.1 Rev$Rev: 367 $"
134
135	# FEHLERBEHANDLUNG
136	# BEI EXIT:
137	trap 'rm -rf $working_directory/tmp_mbuild
138	if [[ $locat != normal ]]
139	then
140	printf "\n\n +++ mbuild killed \n\n"
141	else
142	printf "\n\n *** mbuild finished \n\n"
143	fi' exit
144
145
146	# BEI TERMINAL-BREAK:
147	trap 'rm -rf $working_directory/tmp_mbuild
148	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
149	exit
150	' 2
151
152
153	tmp_mbuild=${working_directory}/tmp_mbuild
154
155	# SHELLSCRIPT-OPTIONEN EINLESEN
156	while getopts :c:h:m:rs:u option
157	do
158	case $option in
159	(c) config_file=$OPTARG;;
160	(h) host=$OPTARG;;
161	(m) makefile=$OPTARG;;
162	(r) remote_mode=batch;;
163	(s) suf=$OPTARG;;
164	(u) compile_utility_programs=true;;
165	(\?) printf "\n +++ unknown option $OPTARG \n";
166	locat=parameter; exit;;
167	esac
168	done
169
170
171
172	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
173	if [[ $remote_mode = batch ]]
174	then
175	printf "\n +++ sorry, batch mode does not work! \n"
176	locat=parameter; exit
177	fi
178
179
180
181	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
182	if [[ ! -f $config_file ]]
183	then
184	printf "\n +++ configuration file: "
185	printf "\n $config_file"
186	printf "\n does not exist"
187	locat=configuration; exit
188	fi
189
190
191
192	# LOKALEN RECHNER ERMITTELN
193	local_host_real_name=$(hostname)
194	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
195
196
197
198	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
199	line=""
200	grep "%host_identifier" $config_file > $tmp_mbuild
201	while read line
202	do
203	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
204	then
205	HOSTNAME=`echo $line \| cut -d" " -s -f2`
206	host_identifier=`echo $line \| cut -d" " -s -f3`
207	if [[ $local_host_real_name = $HOSTNAME ]]
208	then
209	local_host=$host_identifier
210	break
211	fi
212	fi
213	done < $tmp_mbuild
214
215	if [[ "$local_host" = "" ]]
216	then
217	printf "\n +++ no host identifier found in configuration file \"$config_file\""
218	printf "\n for local host \"$local_host_real_name\"."
219	printf "\n Please add line"
220	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
221	printf "\n to the configuration file."
222	locat=local_host; exit
223	fi
224
225
226
227	[[ $local_host_real_name = scirocco ]] && scirocco=true
228	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
229
230
231
232	if [[ $local_host != ibms ]]
233	then
234	config_file=$PWD/$config_file
235	else
236	config_file=`pwd`/$config_file
237	fi
238
239
240
241	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
242	line=""
243	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
244	while read line
245	do
246	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
247	then
248	local_username=`echo $line \| cut -d" " -s -f2`
249	fi
250	done < $tmp_mbuild
251
252
253	if [[ "$local_username" = "" ]]
254	then
255	printf "\n +++ no user name found in configuration file"
256	printf "\n for local host \"$local_host\" "
257	locat=config_file; exit
258	fi
259
260
261	# LOKALEN QUELLTEXTPFAD ERMITTELN.
262	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
263	# VEREINBART WURDE.
264	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
265	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
266	line=""
267	grep "%" $config_file > $tmp_mbuild
268	while read line
269	do
270	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
271	then
272	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
273	value=`echo $line \| cut -d" " -s -f2`
274	eval export $var=\$value
275	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
276	fi
277	done < $tmp_mbuild
278
279	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
280	line=""
281	grep "%source_path" $config_file > $tmp_mbuild
282	while read line
283	do
284	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
285	then
286	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
287	then
288	global_source_path=`echo $line \| cut -d" " -s -f2`
289	fi
290	fi
291	done < $tmp_mbuild
292
293	line=""
294	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
295	while read line
296	do
297	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
298	then
299	local_source_path=`echo $line \| cut -d" " -s -f2`
300	fi
301	done < $tmp_mbuild
302
303	if [[ "$local_source_path" = "" ]]
304	then
305	if [[ "$global_source_path" != "" ]]
306	then
307	local_source_path=$global_source_path
308	else
309	printf "\n +++ no source path found in configuration file"
310	printf "\n for local host \"$local_host\" "
311	printf "\n please set \"\%source_path\" in configuration file"
312	locat=config_file; exit
313	fi
314	fi
315	eval local_source_path=$local_source_path
316	eval local_source_path=$local_source_path
317
318
319
320	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
321	line=""
322	grep "%depository_path" $config_file > $tmp_mbuild
323	while read line
324	do
325	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
326	then
327	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
328	then
329	global_depository_path=`echo $line \| cut -d" " -s -f2`
330	fi
331	fi
332	done < $tmp_mbuild
333
334
335
336	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
337	# VEREINBART WURDE
338	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
339	then
340	printf "\n +++ no main program or more than one main program defined"
341	printf "\n in configuration file"
342	locat=configuration; exit
343	else
344	line=`grep "%mainprog" $config_file`
345	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
346	then
347	printf "\n +++ no main program defined in configuration file"
348	locat=configuration; exit
349	fi
350	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
351	fi
352
353
354
355	# MAKEFILE vorhanden
356	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
357	if [[ ! -f $makefile ]]
358	then
359	printf "\n +++ makefile: "
360	printf "\n $makefile"
361	printf "\n does not exist"
362	locat=makefile; exit
363	fi
364
365
366	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
367	calltime=$(date)
368	printf "\n"
369	printf "#------------------------------------------------------------------------# \n"
370	printf "\| $version$calltime \| \n"
371	printf "\| \| \n"
372	column1="called on:"; column2=$local_host_real_name
373	printf "\| $column1$column2 \| \n"
374	column1="local username:"; column2=$local_username
375	printf "\| $column1$column2 \| \n"
376	column1="local IP-addres:"; column2=$local_addres
377	printf "\| $column1$column2 \| \n"
378	column1="config file:"; column2=$config_file
379	printf "\| $column1$column2 \| \n"
380	column1="makefile:"; column2=$makefile
381	printf "\| $column1$column2 \| \n"
382	column1="local source path:"; column2=$local_source_path
383	printf "\| $column1$column2 \| \n"
384	printf "#------------------------------------------------------------------------# \n"
385
386	# printf "\| \| \n"
387
388
389	if [[ $compile_utility_programs = false ]]
390	then
391
392	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
393	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
394	cd $local_source_path
395	printf "\n\n *** tar of makefile and source files in $local_source_path"
396	tar -cf ${mainprog}_sources.tar Makefile *.$suf
397	printf "\n"
398
399	fi
400
401
402
403	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
404	if [[ $host = all ]]
405	then
406	printf "\n *** updates will be made for ALL hosts found in"
407	printf "\n the configuration file"
408	else
409	printf "\n *** update will be made for host \"$host\" "
410	fi
411
412	if [[ $silent = false ]]
413	then
414	answer=dummy
415	printf "\n\n"
416	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
417	do
418	printf " >>> continue (y/n) ? "
419	read answer
420	done
421	if [[ $answer = n \|\| $answer = N ]]
422	then
423	locat=user_abort; exit
424	fi
425	fi
426
427
428
429
430	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
431	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
432	printf "\n *** scanning configuration file for host(s) ..."
433
434	grep %fopts $config_file > $tmp_mbuild
435	while read line
436	do
437	# KOMMENTARZEILEN UEBERSPRINGEN
438	[[ $(echo $line \| cut -c1) = "#" ]] && continue
439	(( ihost = ihost + 1 ))
440	hostline[$ihost]="$line"
441	done < $tmp_mbuild
442
443
444	while (( ih < ihost ))
445	do
446
447	(( ih = ih + 1 ))
448
449	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
450	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
451	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
452	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
453	remote_host=`echo $remote_host_string \| cut -d" " -f1`
454	if [[ $host != all ]]
455	then
456	[[ $remote_host != $host ]] && continue
457	fi
458	host_found=true
459	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
460	if [[ $condition1 = $remote_host ]]
461	then
462	condition1=""
463	else
464	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
465	fi
466
467	netcdf_inc=""
468	netcdf_lib=""
469
470	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
471	case $remote_host in
472	(lcmuk) remote_addres=130.75.105.2;;
473	(lcsgib) remote_addres=130.73.232.102;;
474	(lcsgih) remote_addres=130.75.4.102;;
475	(lck) remote_addres=165.132.26.61;;
476	(lctit) remote_addres=172.17.75.161;;
477	(lcxt4) remote_addres=129.177.20.113;;
478	(decalpha) remote_addres=165.132.26.56;;
479	(ibmh) remote_addres=136.172.40.15;;
480	(ibms) remote_addres=150.183.5.101;;
481	(ibmy) remote_addres=165.132.26.58;;
482	(nech) remote_addres=136.172.44.192;;
483	(neck) remote_addres=133.5.178.11;;
484	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
485	(*) if [[ $local_host != $remote_host ]]
486	then
487	printf "\n +++ remote host \"$remote_host\" unknown";
488	printf "\n please inform S. Raasch!"
489	fi;;
490	esac
491
492
493	# REMOTE-USERNAMEN ERMITTELN
494	line=""
495	found=false
496	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
497	while read line1
498	do
499
500	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
501	then
502	line="$line1"
503	fi
504
505	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
506	then
507	remote_username=`echo $line \| cut -d" " -s -f2`
508	found=true
509	fi
510
511	done < $tmp_mbuild
512
513	if [[ $found = false ]]
514	then
515	printf "\n +++ no remote username found in configuration file"
516	printf "\n for \"$remote_host_string\" "
517	locat=config_file; exit
518	fi
519
520
521	# REMOTE-QUELLTEXTPFAD ERMITTELN
522	line=""
523	remote_source_path=""
524	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
525	while read line1
526	do
527
528	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
529	then
530	line="$line1"
531	fi
532
533	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
534	then
535	remote_source_path=`echo $line \| cut -d" " -s -f2`
536	fi
537
538	done < $tmp_mbuild
539
540	if [[ "$remote_source_path" = "" ]]
541	then
542	if [[ "$global_source_path" != "" ]]
543	then
544	remote_source_path=$global_source_path
545	else
546	printf "\n +++ no source path found in configuration file"
547	printf "\n for \"$remote_host_string\" "
548	locat=config_file; exit
549	fi
550	fi
551
552	remote_ud=${remote_source_path}/../UTIL
553	remote_ud=$(eval echo $remote_ud)
554
555
556	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
557	remote_md=""
558	line=""
559	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
560	while read line1
561	do
562
563	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
564	then
565	line="$line1"
566	fi
567
568	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
569	then
570	remote_md=`echo $line \| cut -d" " -s -f2`
571	fi
572
573	done < $tmp_mbuild
574
575	if [[ "$remote_md" = "" ]]
576	then
577	if [[ "$global_depository_path" != "" ]]
578	then
579	remote_md=$global_depository_path
580	else
581	printf "\n +++ no depository path found in configuration file"
582	printf "\n for \"$remote_host_string\" "
583	printf "\n please set \"\%depository_path\" in configuration file"
584	locat=config_file; exit
585	fi
586	fi
587
588	remote_md=$(eval echo $remote_md)
589	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
590	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
591
592
593	# COMPILERNAMEN ERMITTELN
594	line=""
595	found=false
596	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
597	while read line1
598	do
599
600	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
601	then
602	line="$line1"
603	fi
604
605	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
606	then
607	compiler_name=`echo $line \| cut -d" " -s -f2`
608	found=true
609	fi
610
611	done < $tmp_mbuild
612
613	if [[ $found = false ]]
614	then
615	printf "\n +++ no compiler name found in configuration file"
616	printf "\n for \"$remote_host_string\" "
617	locat=config_file; exit
618	fi
619
620
621	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
622	# SERIELLER COMPILERNAME ERMITTELT WERDEN
623	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
624	then
625	line=""
626	found=false
627	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
628	while read line1
629	do
630
631	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
632	then
633	line="$line1"
634	fi
635
636	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
637	then
638	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
639	found=true
640	fi
641
642	done < $tmp_mbuild
643
644	if [[ $found = false ]]
645	then
646	printf "\n +++ no serial compiler name found in configuration file"
647	printf "\n for \"$remote_host_string\" "
648	locat=config_file; exit
649	fi
650	else
651	compiler_name_ser=$compiler_name
652	fi
653
654
655
656	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
657	line=""
658	found=false
659	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
660	while read line1
661	do
662
663	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
664	then
665	line="$line1"
666	fi
667
668	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
669	then
670	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
671	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
672	found=true
673	fi
674
675	done < $tmp_mbuild
676
677	if [[ $found = false ]]
678	then
679	printf "\n +++ no preprocessor options found in configuration file"
680	printf "\n for \"$remote_host_string\" "
681	locat=config_file; exit
682	fi
683
684
685	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
686	for string in $remote_host_string
687	do
688	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
689	then
690	cpp_options="$cpp_options -D__lc "
691	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
692	then
693	cpp_options="${cpp_options},-D__ibm"
694	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
695	then
696	cpp_options="${cpp_options} -D__nec"
697	else
698	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
699	then
700	cpp_options="${cpp_options},-D__$string"
701	else
702	cpp_options="$cpp_options -D__$string "
703	fi
704	fi
705	done
706
707
708
709	# NETCDF-OPTIONEN ERMITTELN
710	line=""
711	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
712	while read line1
713	do
714
715	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
716	then
717	line="$line1"
718	fi
719
720	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
721	then
722	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
723	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
724	fi
725
726	done < $tmp_mbuild
727
728	line=""
729	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
730	while read line1
731	do
732
733	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
734	then
735	line="$line1"
736	fi
737
738	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
739	then
740	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
741	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
742	fi
743
744	done < $tmp_mbuild
745
746
747
748	# COMPILEROPTIONEN ERMITTELN
749	line=""
750	found=false
751	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
752	while read line1
753	do
754
755	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
756	then
757	line="$line1"
758	fi
759
760	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
761	then
762	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
763	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
764	found=true
765
766	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
767	compiler_options="$compiler_options $netcdf_inc"
768	fi
769
770	done < $tmp_mbuild
771
772	if [[ $found = false ]]
773	then
774	printf "\n +++ no compiler options found in configuration file"
775	printf "\n for \"$remote_host_string\" "
776	locat=config_file; exit
777	fi
778
779
780
781	# MPI LIBRARY ERMITTELN
782	line=""
783	found=false
784	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
785	while read line1
786	do
787
788	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
789	then
790	line="$line1"
791	fi
792
793	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
794	then
795	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
796	mpilib=`echo $line \| cut -d" " -s -f2`
797	found=true
798	fi
799
800	done < $tmp_mbuild
801
802	[[ $found = false ]] && mpilib=mpt
803
804
805
806
807	# LADER-OPTIONEN ERMITTELN
808	line=""
809	found=false
810	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
811	while read line1
812	do
813
814	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
815	then
816	line="$line1"
817	fi
818
819	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
820	then
821	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
822	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
823	found=true
824
825	# NETCDF-LIBRARY HINZUFUEGEN
826	loader_options="$loader_options $netcdf_lib"
827	fi
828
829	done < $tmp_mbuild
830
831	if [[ $found = false ]]
832	then
833	printf "\n +++ no loader options found in configuration file"
834	printf "\n for \"$remote_host_string\" "
835	locat=config_file; exit
836	fi
837
838
839	printf "\n\n#------------------------------------------------------------------------# \n"
840	if [[ $remote_host = $local_host ]]
841	then
842	column1="remote_host:"; column2="$remote_host (= local host!)"
843	else
844	column1="remote_host:"; column2=$remote_host
845	fi
846	printf "\| $column1$column2 \| \n"
847	printf "\| \| \n"
848	column1="conditions:"; column2="$condition1 $condition2"
849	printf "\| $column1$column2 \| \n"
850	column1="make depository:"; column2=$remote_md
851	printf "\| $column1$column2 \| \n"
852	line=$(echo "$remote_md" \| cut -c51-)
853	while [[ "$line" != "" ]]
854	do
855	column1=""
856	column2=$line
857	printf "\| $column1$column2 \| \n"
858	line=$(echo "$line" \| cut -c51-)
859	done
860	if [[ $compile_utility_programs = true ]]
861	then
862	column1="utility directory:"; column2=$remote_ud
863	printf "\| $column1$column2 \| \n"
864	fi
865	column1="username:"; column2=$remote_username
866	printf "\| $column1$column2 \| \n"
867	column1="addres:"; column2=$remote_addres
868	printf "\| $column1$column2 \| \n"
869	column1="compiler:"; column2=$compiler_name
870	printf "\| $column1$column2 \| \n"
871	if [[ $compile_utility_programs = true ]]
872	then
873	column1="serial compiler:"; column2=$compiler_name_ser
874	printf "\| $column1$column2 \| \n"
875	fi
876	column1="cpp options:"; column2=$cpp_options
877	printf "\| $column1$column2 \| \n"
878	line=$(echo "$cpp_options" \| cut -c51-)
879	while [[ "$line" != "" ]]
880	do
881	column1=""
882	column2=$line
883	printf "\| $column1$column2 \| \n"
884	line=$(echo "$line" \| cut -c51-)
885	done
886	column1="compiler options:"; column2=$compiler_options
887	printf "\| $column1$column2 \| \n"
888	line=$(echo "$compiler_options" \| cut -c51-)
889	while [[ "$line" != "" ]]
890	do
891	column1=""
892	column2=$line
893	printf "\| $column1$column2 \| \n"
894	line=$(echo "$line" \| cut -c51-)
895	done
896	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
897	then
898	column1="mpi library:"; column2=$mpilib
899	printf "\| $column1$column2 \| \n"
900	fi
901	column1="loader options:"; column2=$loader_options
902	printf "\| $column1$column2 \| \n"
903	line=$(echo "$loader_options" \| cut -c51-)
904	while [[ "$line" != "" ]]
905	do
906	column1=""
907	column2=$line
908	printf "\| $column1$column2 \| \n"
909	line=$(echo "$line" \| cut -c51-)
910	done
911	printf "#------------------------------------------------------------------------# \n"
912
913	if [[ $silent = false ]]
914	then
915	answer=dummy
916	printf "\n\n"
917	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
918	do
919	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
920	read answer
921	done
922	if [[ $answer = a \|\| $answer = A ]]
923	then
924	locat=user_abort; exit
925	fi
926	if [[ $answer = c \|\| $answer = C ]]
927	then
928	silent=false
929	fi
930	if [[ $answer = s \|\| $answer = S ]]
931	then
932	continue
933	fi
934	fi
935
936
937	if [[ $remote_mode = batch ]]
938	then
939
940	# BATCH-JOB PARAMETER SETZEN
941	case $remote_host in
942	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
943	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
944	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
945	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
946	esac
947
948
949	# BATCH-JOB ZUSAMMENSTELLEN
950	printf "\n *** creating batch-job for remote host"
951	echo " " > mbuild_job
952
953	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
954	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
955	if [[ $remote_host = t3ej2 ]]
956	then
957	echo "set +vx" >> mbuild_job
958	echo ". .profile" >> mbuild_job
959	echo "set -x" >> mbuild_job
960	fi
961
962	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
963	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
964	then
965	echo "module list" >> mbuild_job
966	fi
967
968
969	# WECHSEL IN TEMPORAERES VERZEICHNIS
970	echo "cd ${remote_md}" >> mbuild_job
971
972
973	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
974	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
975	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
976
977
978	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
979	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
980
981
982	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
983	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
984
985
986	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
987	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
988	echo "chmod u+w *" >> mbuild_job
989
990	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
991	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
992
993
994	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
995	echo "make clean" >> mbuild_job
996	echo "rm ${mainprog}_sources.tar" >> mbuild_job
997	echo "rm *.f90 Makefile" >> mbuild_job
998
999
1000
1001	# JOB MITTELS SUBJOB STARTEN
1002	printf "\n *** sending batch job to remote host"
1003	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1004
1005
1006	# JOBFILE LOESCHEN
1007	# rm aljob
1008
1009	else
1010
1011	if [[ $remote_host != $local_host ]]
1012	then
1013
1014	if [[ $compile_utility_programs = false ]]
1015	then
1016
1017	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1018	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1019	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1020	if [[ $remote_host != lctit ]]
1021	then
1022	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1023	else
1024	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1025	# MIT SSH, DESHALB AUFRUF PER PIPE
1026	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1027	fi
1028	if [[ $local_host = decalpha ]]
1029	then
1030	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1031	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1032	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1033	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1034	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1035	else
1036	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1037	fi
1038
1039
1040
1041	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1042	echo " *** untar previous update on remote host, if existing"
1043	if [[ $remote_host != lctit ]]
1044	then
1045	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1046	else
1047	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1048	# MIT SSH, DESHALB AUFRUF PER PIPE
1049	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1050	fi
1051
1052
1053	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1054	echo " *** untar actual sources on remote host"
1055	if [[ $remote_host != lctit ]]
1056	then
1057	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1058	else
1059	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1060	# MIT SSH, DESHALB AUFRUF PER PIPE
1061	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1062	fi
1063
1064
1065	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1066	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1067	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1068	# Z.B. DIE PFADE ZUM COMPILER)
1069	echo " *** execute \"make\" on remote host"
1070
1071	if [[ $remote_host = nech ]]
1072	then
1073	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1074	else
1075	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1076	fi
1077
1078	if [[ $remote_host = t3eh ]]
1079	then
1080
1081	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1082
1083	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1084	then
1085
1086	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1087
1088	elif [[ $remote_host = ibmh ]]
1089	then
1090
1091	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1092
1093	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1094	then
1095
1096	print ". /usr/share/modules/init/bash; module load ifort/11.0.069; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1097	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1098	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1099
1100	elif [[ $remote_host = lctit ]]
1101	then
1102
1103	echo " " > ${remote_host}_last_make_protokoll
1104	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1105	do
1106	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1107	done
1108
1109	elif [[ $remote_host = lcxt4 ]]
1110	then
1111
1112	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1113
1114	else
1115
1116	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1117
1118	fi
1119
1120	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1121	then
1122	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1123	if [[ $silent = false ]]
1124	then
1125	answer=dummy
1126	printf "\n"
1127	while [[ "$answer" != c && "$answer" != k ]]
1128	do
1129	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1130	read answer
1131	if [[ "$answer" = l ]]
1132	then
1133	more ${remote_host}_last_make_protokoll
1134	fi
1135	done
1136	if [[ $answer = k ]]
1137	then
1138	locat=user_abort; exit
1139	fi
1140	fi
1141	fi
1142
1143
1144
1145	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1146	printf "\n *** tar update on remote host ..."
1147	if [[ $remote_host != lctit ]]
1148	then
1149	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1150	else
1151	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1152	# MIT SSH, DESHALB AUFRUF PER PIPE
1153	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1154	fi
1155
1156
1157	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1158	# printf "\n *** \"make clean\" on remote host ..."
1159	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1160	# printf "\n"
1161
1162
1163
1164
1165	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1166	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1167	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1168	elif [[ $compile_utility_programs = true ]]
1169	then
1170
1171	printf "\n\n"
1172	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1173	cd ${local_source_path}/../SCRIPTS
1174
1175	if [[ $remote_host != lctit ]]
1176	then
1177	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1178	else
1179	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1180	# MIT SSH, DESHALB AUFRUF PER PIPE
1181	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1182	fi
1183
1184	# KOPIEREN DER SCRIPTE
1185	if [[ $local_host = decalpha ]]
1186	then
1187	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1188	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1189	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1190	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1191	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1192	else
1193	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1194	fi
1195
1196	cd - > /dev/null
1197	cd ${local_source_path}/../UTIL
1198
1199
1200	# KOPIEREN DER UTILITY-PROGRAMME
1201	if [[ $local_host = decalpha ]]
1202	then
1203	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1204	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1205	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1206	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1207	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1208	else
1209	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1210	fi
1211
1212
1213
1214	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1215	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1216	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1217	# Z.B. DIE PFADE ZUM COMPILER)
1218	echo " *** execute \"make\" on remote host"
1219
1220	if [[ $remote_host = nech ]]
1221	then
1222	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1223	else
1224	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1225	fi
1226
1227	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1228	then
1229
1230	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1231
1232	elif [[ $remote_host = ibmh ]]
1233	then
1234
1235	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1236
1237	elif [[ $remote_host = lctit ]]
1238	then
1239
1240	echo " " > ${remote_host}_last_make_protokoll
1241	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1242	do
1243	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1244	done
1245
1246	else
1247
1248	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1249
1250	fi
1251
1252	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1253
1254	rm -rf ${remote_host}_last_make_protokoll
1255
1256	else
1257
1258	if [[ $compile_utility_programs = false ]]
1259	then
1260
1261	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1262	eval remote_md=$remote_md
1263	if [[ ! -d $remote_md ]]
1264	then
1265	if mkdir $remote_md
1266	then
1267	printf "\n\n *** directory for make depository:"
1268	printf "\n $remote_md"
1269	printf "\n was created\n"
1270	else
1271	printf "\n +++ directory for make depository:"
1272	printf "\n $remote_md"
1273	printf "\n cannot be created"
1274	locat=local_depository_path; exit
1275	fi
1276	fi
1277
1278	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1279	echo " "
1280	echo " *** updating sources in $remote_md"
1281	cd $remote_md
1282	cp $local_source_path/${mainprog}_sources.tar .
1283	tar xf ${mainprog}_sources.tar
1284
1285	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1286	echo " "
1287	echo " *** execute \"make\" on local host"
1288
1289	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1290
1291	if [[ $? != 0 ]]
1292	then
1293	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1294	if [[ $silent = false ]]
1295	then
1296	answer=dummy
1297	printf "\n"
1298	while [[ "$answer" != c && "$answer" != k ]]
1299	do
1300	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1301	read answer
1302	if [[ "$answer" = l ]]
1303	then
1304	more ${remote_host}_last_make_protokoll
1305	fi
1306	done
1307	if [[ $answer = k ]]
1308	then
1309	locat=user_abort; exit
1310	fi
1311	fi
1312	fi
1313
1314
1315	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1316	printf "\n *** tar update on local host ..."
1317	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1318
1319
1320	# COMPILE THE UTILITY PROGRAMS
1321	elif [[ $compile_utility_programs = true ]]
1322	then
1323	printf "\n\n"
1324	echo " *** compiling the utility programs ..."
1325	cd ${local_source_path}/../UTIL
1326	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1327	cd - > /dev/null
1328	fi
1329
1330	fi
1331
1332	fi
1333	done
1334
1335
1336	if [[ $host_found = false ]]
1337	then
1338	if [[ $host = all ]]
1339	then
1340	printf "\n +++ no hosts found in configuration file"
1341	else
1342	printf "\n +++ host \"$host\" not found in configuration file"
1343	fi
1344	locat=config_file; exit
1345	fi
1346
1347
1348
1349	# ABSCHLIESSENDE ARBEITEN
1350	rm -f hosts_found_in_config_file
1351

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |