Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 264

Last change on this file since 264 was 224, checked in by letzel, 16 years ago
mbuild: re-enable compilation more than once on lcmuk (as on other machines)
Property svn:keywords set to `Id Rev`
File size: 48.1 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 224 2009-01-13 17:58:15Z raasch $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90	# from configuration file
91	# host identifier (local_host) is read from config file
92	# 10/10/07 - Siggi - bugfix: handling of comment lines
93	# 18/07/08 - Siggi - adapted for lcsgih
94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95	# ({mainprog}_current_version)
96	# 02/10/08 - Siggi - adapted for lcxt4
97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
98	# remains in source directory, one depository per block
99	# (given in the config-file) is created, always all files
100	# from the source directory are copied to the respective
101	# depository, no additional file checks are done any more
102	# (version 2.1)
103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
104	# other machines)
105
106
107
108	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
109	compile_utility_programs=false
110	config_file=.mrun.config
111	fimm=false
112	host=all
113	host_found=false
114	locat=normal
115	makefile=""
116	remote_mode=interactive
117	scirocco=false
118	silent=false
119	suf=f90
120	update=false
121	working_directory=`pwd`
122
123	typeset -i ih ihost=0
124
125	typeset -R30 calltime
126	typeset -L20 column1
127	typeset -L50 column2
128	typeset -L70 column3
129	typeset -L40 version="MBUILD 2.1 Rev$Rev: 224 $"
130
131	# FEHLERBEHANDLUNG
132	# BEI EXIT:
133	trap 'rm -rf $working_directory/tmp_mbuild
134	if [[ $locat != normal ]]
135	then
136	printf "\n\n +++ mbuild killed \n\n"
137	else
138	printf "\n\n *** mbuild finished \n\n"
139	fi' exit
140
141
142	# BEI TERMINAL-BREAK:
143	trap 'rm -rf $working_directory/tmp_mbuild
144	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
145	exit
146	' 2
147
148
149	tmp_mbuild=${working_directory}/tmp_mbuild
150
151	# SHELLSCRIPT-OPTIONEN EINLESEN
152	while getopts :c:h:m:rs:u option
153	do
154	case $option in
155	(c) config_file=$OPTARG;;
156	(h) host=$OPTARG;;
157	(m) makefile=$OPTARG;;
158	(r) remote_mode=batch;;
159	(s) suf=$OPTARG;;
160	(u) compile_utility_programs=true;;
161	(\?) printf "\n +++ unknown option $OPTARG \n";
162	locat=parameter; exit;;
163	esac
164	done
165
166
167
168	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
169	if [[ $remote_mode = batch ]]
170	then
171	printf "\n +++ sorry, batch mode does not work! \n"
172	locat=parameter; exit
173	fi
174
175
176
177	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
178	if [[ ! -f $config_file ]]
179	then
180	printf "\n +++ configuration file: "
181	printf "\n $config_file"
182	printf "\n does not exist"
183	locat=configuration; exit
184	fi
185
186
187
188	# LOKALEN RECHNER ERMITTELN
189	local_host_real_name=$(hostname)
190	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
191
192
193
194	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
195	line=""
196	grep "%host_identifier" $config_file > $tmp_mbuild
197	while read line
198	do
199	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
200	then
201	HOSTNAME=`echo $line \| cut -d" " -s -f2`
202	host_identifier=`echo $line \| cut -d" " -s -f3`
203	if [[ $local_host_real_name = $HOSTNAME ]]
204	then
205	local_host=$host_identifier
206	break
207	fi
208	fi
209	done < $tmp_mbuild
210
211	if [[ "$local_host" = "" ]]
212	then
213	printf "\n +++ no host identifier found in configuration file \"$config_file\""
214	printf "\n for local host \"$local_host_real_name\"."
215	printf "\n Please add line"
216	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
217	printf "\n to the configuration file."
218	locat=local_host; exit
219	fi
220
221
222
223	[[ $local_host_real_name = scirocco ]] && scirocco=true
224	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
225
226
227
228	if [[ $local_host != ibms ]]
229	then
230	config_file=$PWD/$config_file
231	else
232	config_file=`pwd`/$config_file
233	fi
234
235
236
237	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
238	line=""
239	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
240	while read line
241	do
242	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
243	then
244	local_username=`echo $line \| cut -d" " -s -f2`
245	fi
246	done < $tmp_mbuild
247
248
249	if [[ "$local_username" = "" ]]
250	then
251	printf "\n +++ no user name found in configuration file"
252	printf "\n for local host \"$local_host\" "
253	locat=config_file; exit
254	fi
255
256
257	# LOKALEN QUELLTEXTPFAD ERMITTELN.
258	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
259	# VEREINBART WURDE.
260	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
261	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
262	line=""
263	grep "%" $config_file > $tmp_mbuild
264	while read line
265	do
266	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
267	then
268	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
269	value=`echo $line \| cut -d" " -s -f2`
270	eval export $var=\$value
271	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
272	fi
273	done < $tmp_mbuild
274
275	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
276	line=""
277	grep "%source_path" $config_file > $tmp_mbuild
278	while read line
279	do
280	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
281	then
282	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
283	then
284	global_source_path=`echo $line \| cut -d" " -s -f2`
285	fi
286	fi
287	done < $tmp_mbuild
288
289	line=""
290	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
291	while read line
292	do
293	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
294	then
295	local_source_path=`echo $line \| cut -d" " -s -f2`
296	fi
297	done < $tmp_mbuild
298
299	if [[ "$local_source_path" = "" ]]
300	then
301	if [[ "$global_source_path" != "" ]]
302	then
303	local_source_path=$global_source_path
304	else
305	printf "\n +++ no source path found in configuration file"
306	printf "\n for local host \"$local_host\" "
307	printf "\n please set \"\%source_path\" in configuration file"
308	locat=config_file; exit
309	fi
310	fi
311	eval local_source_path=$local_source_path
312	eval local_source_path=$local_source_path
313
314
315
316	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
317	line=""
318	grep "%depository_path" $config_file > $tmp_mbuild
319	while read line
320	do
321	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
322	then
323	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
324	then
325	global_depository_path=`echo $line \| cut -d" " -s -f2`
326	fi
327	fi
328	done < $tmp_mbuild
329
330
331
332	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
333	# VEREINBART WURDE
334	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
335	then
336	printf "\n +++ no main program or more than one main program defined"
337	printf "\n in configuration file"
338	locat=configuration; exit
339	else
340	line=`grep "%mainprog" $config_file`
341	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
342	then
343	printf "\n +++ no main program defined in configuration file"
344	locat=configuration; exit
345	fi
346	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
347	fi
348
349
350
351	# MAKEFILE vorhanden
352	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
353	if [[ ! -f $makefile ]]
354	then
355	printf "\n +++ makefile: "
356	printf "\n $makefile"
357	printf "\n does not exist"
358	locat=makefile; exit
359	fi
360
361
362	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
363	calltime=$(date)
364	printf "\n"
365	printf "#------------------------------------------------------------------------# \n"
366	printf "\| $version$calltime \| \n"
367	printf "\| \| \n"
368	column1="called on:"; column2=$local_host_real_name
369	printf "\| $column1$column2 \| \n"
370	column1="local username:"; column2=$local_username
371	printf "\| $column1$column2 \| \n"
372	column1="local IP-addres:"; column2=$local_addres
373	printf "\| $column1$column2 \| \n"
374	column1="config file:"; column2=$config_file
375	printf "\| $column1$column2 \| \n"
376	column1="makefile:"; column2=$makefile
377	printf "\| $column1$column2 \| \n"
378	column1="local source path:"; column2=$local_source_path
379	printf "\| $column1$column2 \| \n"
380	printf "#------------------------------------------------------------------------# \n"
381
382	# printf "\| \| \n"
383
384
385	if [[ $compile_utility_programs = false ]]
386	then
387
388	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
389	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
390	cd $local_source_path
391	printf "\n\n *** tar of makefile and source files in $local_source_path"
392	tar -cf ${mainprog}_sources.tar Makefile *.$suf
393	printf "\n"
394
395	fi
396
397
398
399	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
400	if [[ $host = all ]]
401	then
402	printf "\n *** updates will be made for ALL hosts found in"
403	printf "\n the configuration file"
404	else
405	printf "\n *** update will be made for host \"$host\" "
406	fi
407
408	if [[ $silent = false ]]
409	then
410	answer=dummy
411	printf "\n\n"
412	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
413	do
414	printf " >>> continue (y/n) ? "
415	read answer
416	done
417	if [[ $answer = n \|\| $answer = N ]]
418	then
419	locat=user_abort; exit
420	fi
421	fi
422
423
424
425
426	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
427	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
428	printf "\n *** scanning configuration file for host(s) ..."
429
430	grep %fopts $config_file > $tmp_mbuild
431	while read line
432	do
433	# KOMMENTARZEILEN UEBERSPRINGEN
434	[[ $(echo $line \| cut -c1) = "#" ]] && continue
435	(( ihost = ihost + 1 ))
436	hostline[$ihost]="$line"
437	done < $tmp_mbuild
438
439
440	while (( ih < ihost ))
441	do
442
443	(( ih = ih + 1 ))
444
445	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
446	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
447	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
448	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
449	remote_host=`echo $remote_host_string \| cut -d" " -f1`
450	if [[ $host != all ]]
451	then
452	[[ $remote_host != $host ]] && continue
453	fi
454	host_found=true
455	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
456	if [[ $condition1 = $remote_host ]]
457	then
458	condition1=""
459	else
460	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
461	fi
462
463	netcdf_inc=""
464	netcdf_lib=""
465
466	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
467	case $remote_host in
468	(lcmuk) remote_addres=130.75.105.2;;
469	(lcsgib) remote_addres=130.73.232.102;;
470	(lcsgih) remote_addres=130.75.4.103;;
471	(lctit) remote_addres=172.17.75.161;;
472	(lcxt4) remote_addres=129.177.20.113;;
473	(decalpha) remote_addres=165.132.26.56;;
474	(ibmb) remote_addres=130.73.230.10;;
475	(ibmh) remote_addres=130.75.4.10;;
476	(ibms) remote_addres=150.183.5.101;;
477	(ibmy) remote_addres=165.132.26.58;;
478	(nech) remote_addres=136.172.44.192;;
479	(neck) remote_addres=133.5.178.11;;
480	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
481	(*) if [[ $local_host != $remote_host ]]
482	then
483	printf "\n +++ remote host \"$remote_host\" unknown";
484	printf "\n please inform S. Raasch!"
485	fi;;
486	esac
487
488
489	# REMOTE-USERNAMEN ERMITTELN
490	line=""
491	found=false
492	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
493	while read line1
494	do
495
496	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
497	then
498	line="$line1"
499	fi
500
501	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
502	then
503	remote_username=`echo $line \| cut -d" " -s -f2`
504	found=true
505	fi
506
507	done < $tmp_mbuild
508
509	if [[ $found = false ]]
510	then
511	printf "\n +++ no remote username found in configuration file"
512	printf "\n for \"$remote_host_string\" "
513	locat=config_file; exit
514	fi
515
516
517	# REMOTE-QUELLTEXTPFAD ERMITTELN
518	line=""
519	remote_source_path=""
520	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
521	while read line1
522	do
523
524	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
525	then
526	line="$line1"
527	fi
528
529	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
530	then
531	remote_source_path=`echo $line \| cut -d" " -s -f2`
532	fi
533
534	done < $tmp_mbuild
535
536	if [[ "$remote_source_path" = "" ]]
537	then
538	if [[ "$global_source_path" != "" ]]
539	then
540	remote_source_path=$global_source_path
541	else
542	printf "\n +++ no source path found in configuration file"
543	printf "\n for \"$remote_host_string\" "
544	locat=config_file; exit
545	fi
546	fi
547
548	remote_ud=${remote_source_path}/../UTIL
549	remote_ud=$(eval echo $remote_ud)
550
551
552	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
553	remote_md=""
554	line=""
555	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
556	while read line1
557	do
558
559	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
560	then
561	line="$line1"
562	fi
563
564	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
565	then
566	remote_md=`echo $line \| cut -d" " -s -f2`
567	fi
568
569	done < $tmp_mbuild
570
571	if [[ "$remote_md" = "" ]]
572	then
573	if [[ "$global_depository_path" != "" ]]
574	then
575	remote_md=$global_depository_path
576	else
577	printf "\n +++ no depository path found in configuration file"
578	printf "\n for \"$remote_host_string\" "
579	printf "\n please set \"\%depository_path\" in configuration file"
580	locat=config_file; exit
581	fi
582	fi
583
584	remote_md=$(eval echo $remote_md)
585	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
586	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
587
588
589	# COMPILERNAMEN ERMITTELN
590	line=""
591	found=false
592	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
593	while read line1
594	do
595
596	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
597	then
598	line="$line1"
599	fi
600
601	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
602	then
603	compiler_name=`echo $line \| cut -d" " -s -f2`
604	found=true
605	fi
606
607	done < $tmp_mbuild
608
609	if [[ $found = false ]]
610	then
611	printf "\n +++ no compiler name found in configuration file"
612	printf "\n for \"$remote_host_string\" "
613	locat=config_file; exit
614	fi
615
616
617	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
618	# SERIELLER COMPILERNAME ERMITTELT WERDEN
619	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
620	then
621	line=""
622	found=false
623	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
624	while read line1
625	do
626
627	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
628	then
629	line="$line1"
630	fi
631
632	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
633	then
634	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
635	found=true
636	fi
637
638	done < $tmp_mbuild
639
640	if [[ $found = false ]]
641	then
642	printf "\n +++ no serial compiler name found in configuration file"
643	printf "\n for \"$remote_host_string\" "
644	locat=config_file; exit
645	fi
646	else
647	compiler_name_ser=$compiler_name
648	fi
649
650
651
652	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
653	line=""
654	found=false
655	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
656	while read line1
657	do
658
659	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
660	then
661	line="$line1"
662	fi
663
664	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
665	then
666	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
667	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
668	found=true
669	fi
670
671	done < $tmp_mbuild
672
673	if [[ $found = false ]]
674	then
675	printf "\n +++ no preprocessor options found in configuration file"
676	printf "\n for \"$remote_host_string\" "
677	locat=config_file; exit
678	fi
679
680
681	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
682	for string in $remote_host_string
683	do
684	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
685	then
686	cpp_options="$cpp_options -D__lc "
687	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
688	then
689	cpp_options="${cpp_options},-D__ibm"
690	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
691	then
692	cpp_options="${cpp_options} -D__nec"
693	else
694	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
695	then
696	cpp_options="${cpp_options},-D__$string"
697	else
698	cpp_options="$cpp_options -D__$string "
699	fi
700	fi
701	done
702
703
704
705	# NETCDF-OPTIONEN ERMITTELN
706	line=""
707	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
708	while read line1
709	do
710
711	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
712	then
713	line="$line1"
714	fi
715
716	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
717	then
718	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
719	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
720	fi
721
722	done < $tmp_mbuild
723
724	line=""
725	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
726	while read line1
727	do
728
729	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
730	then
731	line="$line1"
732	fi
733
734	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
735	then
736	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
737	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
738	fi
739
740	done < $tmp_mbuild
741
742
743
744	# COMPILEROPTIONEN ERMITTELN
745	line=""
746	found=false
747	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
748	while read line1
749	do
750
751	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
752	then
753	line="$line1"
754	fi
755
756	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
757	then
758	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
759	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
760	found=true
761
762	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
763	compiler_options="$compiler_options $netcdf_inc"
764	fi
765
766	done < $tmp_mbuild
767
768	if [[ $found = false ]]
769	then
770	printf "\n +++ no compiler options found in configuration file"
771	printf "\n for \"$remote_host_string\" "
772	locat=config_file; exit
773	fi
774
775
776
777	# MPI LIBRARY ERMITTELN
778	line=""
779	found=false
780	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
781	while read line1
782	do
783
784	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
785	then
786	line="$line1"
787	fi
788
789	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
790	then
791	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
792	mpilib=`echo $line \| cut -d" " -s -f2`
793	found=true
794	fi
795
796	done < $tmp_mbuild
797
798	[[ $found = false ]] && mpilib=mpt
799
800
801
802
803	# LADER-OPTIONEN ERMITTELN
804	line=""
805	found=false
806	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
807	while read line1
808	do
809
810	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
811	then
812	line="$line1"
813	fi
814
815	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
816	then
817	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
818	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
819	found=true
820
821	# NETCDF-LIBRARY HINZUFUEGEN
822	loader_options="$loader_options $netcdf_lib"
823	fi
824
825	done < $tmp_mbuild
826
827	if [[ $found = false ]]
828	then
829	printf "\n +++ no loader options found in configuration file"
830	printf "\n for \"$remote_host_string\" "
831	locat=config_file; exit
832	fi
833
834
835	printf "\n\n#------------------------------------------------------------------------# \n"
836	if [[ $remote_host = $local_host ]]
837	then
838	column1="remote_host:"; column2="$remote_host (= local host!)"
839	else
840	column1="remote_host:"; column2=$remote_host
841	fi
842	printf "\| $column1$column2 \| \n"
843	printf "\| \| \n"
844	column1="conditions:"; column2="$condition1 $condition2"
845	printf "\| $column1$column2 \| \n"
846	column1="make depository:"; column2=$remote_md
847	printf "\| $column1$column2 \| \n"
848	line=$(echo "$remote_md" \| cut -c51-)
849	while [[ "$line" != "" ]]
850	do
851	column1=""
852	column2=$line
853	printf "\| $column1$column2 \| \n"
854	line=$(echo "$line" \| cut -c51-)
855	done
856	if [[ $compile_utility_programs = true ]]
857	then
858	column1="utility directory:"; column2=$remote_ud
859	printf "\| $column1$column2 \| \n"
860	fi
861	column1="username:"; column2=$remote_username
862	printf "\| $column1$column2 \| \n"
863	column1="addres:"; column2=$remote_addres
864	printf "\| $column1$column2 \| \n"
865	column1="compiler:"; column2=$compiler_name
866	printf "\| $column1$column2 \| \n"
867	if [[ $compile_utility_programs = true ]]
868	then
869	column1="serial compiler:"; column2=$compiler_name_ser
870	printf "\| $column1$column2 \| \n"
871	fi
872	column1="cpp options:"; column2=$cpp_options
873	printf "\| $column1$column2 \| \n"
874	line=$(echo "$cpp_options" \| cut -c51-)
875	while [[ "$line" != "" ]]
876	do
877	column1=""
878	column2=$line
879	printf "\| $column1$column2 \| \n"
880	line=$(echo "$line" \| cut -c51-)
881	done
882	column1="compiler options:"; column2=$compiler_options
883	printf "\| $column1$column2 \| \n"
884	line=$(echo "$compiler_options" \| cut -c51-)
885	while [[ "$line" != "" ]]
886	do
887	column1=""
888	column2=$line
889	printf "\| $column1$column2 \| \n"
890	line=$(echo "$line" \| cut -c51-)
891	done
892	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
893	then
894	column1="mpi library:"; column2=$mpilib
895	printf "\| $column1$column2 \| \n"
896	fi
897	column1="loader options:"; column2=$loader_options
898	printf "\| $column1$column2 \| \n"
899	line=$(echo "$loader_options" \| cut -c51-)
900	while [[ "$line" != "" ]]
901	do
902	column1=""
903	column2=$line
904	printf "\| $column1$column2 \| \n"
905	line=$(echo "$line" \| cut -c51-)
906	done
907	printf "#------------------------------------------------------------------------# \n"
908
909	if [[ $silent = false ]]
910	then
911	answer=dummy
912	printf "\n\n"
913	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
914	do
915	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
916	read answer
917	done
918	if [[ $answer = a \|\| $answer = A ]]
919	then
920	locat=user_abort; exit
921	fi
922	if [[ $answer = c \|\| $answer = C ]]
923	then
924	silent=false
925	fi
926	if [[ $answer = s \|\| $answer = S ]]
927	then
928	continue
929	fi
930	fi
931
932
933	if [[ $remote_mode = batch ]]
934	then
935
936	# BATCH-JOB PARAMETER SETZEN
937	case $remote_host in
938	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
939	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
940	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
941	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
942	esac
943
944
945	# BATCH-JOB ZUSAMMENSTELLEN
946	printf "\n *** creating batch-job for remote host"
947	echo " " > mbuild_job
948
949	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
950	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
951	if [[ $remote_host = t3ej2 ]]
952	then
953	echo "set +vx" >> mbuild_job
954	echo ". .profile" >> mbuild_job
955	echo "set -x" >> mbuild_job
956	fi
957
958	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
959	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
960	then
961	echo "module list" >> mbuild_job
962	fi
963
964
965	# WECHSEL IN TEMPORAERES VERZEICHNIS
966	echo "cd ${remote_md}" >> mbuild_job
967
968
969	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
970	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
971	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
972
973
974	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
975	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
976
977
978	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
979	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
980
981
982	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
983	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
984	echo "chmod u+w *" >> mbuild_job
985
986	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
987	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
988
989
990	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
991	echo "make clean" >> mbuild_job
992	echo "rm ${mainprog}_sources.tar" >> mbuild_job
993	echo "rm *.f90 Makefile" >> mbuild_job
994
995
996
997	# JOB MITTELS SUBJOB STARTEN
998	printf "\n *** sending batch job to remote host"
999	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1000
1001
1002	# JOBFILE LOESCHEN
1003	# rm aljob
1004
1005	else
1006
1007	if [[ $remote_host != $local_host ]]
1008	then
1009
1010	if [[ $compile_utility_programs = false ]]
1011	then
1012
1013	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1014	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1015	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1016	if [[ $remote_host != lctit ]]
1017	then
1018	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1019	else
1020	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1021	# MIT SSH, DESHALB AUFRUF PER PIPE
1022	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1023	fi
1024	if [[ $local_host = decalpha ]]
1025	then
1026	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1027	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1028	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1029	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1030	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1031	else
1032	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1033	fi
1034
1035
1036
1037	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1038	echo " *** untar previous update on remote host, if existing"
1039	if [[ $remote_host != lctit ]]
1040	then
1041	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1042	else
1043	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1044	# MIT SSH, DESHALB AUFRUF PER PIPE
1045	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1046	fi
1047
1048
1049	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1050	echo " *** untar actual sources on remote host"
1051	if [[ $remote_host != lctit ]]
1052	then
1053	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1054	else
1055	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1056	# MIT SSH, DESHALB AUFRUF PER PIPE
1057	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1058	fi
1059
1060
1061	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1062	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1063	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1064	# Z.B. DIE PFADE ZUM COMPILER)
1065	echo " *** execute \"make\" on remote host"
1066
1067	if [[ $remote_host = nech ]]
1068	then
1069	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1070	else
1071	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1072	fi
1073
1074	if [[ $remote_host = t3eh ]]
1075	then
1076
1077	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1078
1079	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1080	then
1081
1082	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1083
1084	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1085	then
1086
1087	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1088
1089	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1090	then
1091
1092	print ". /usr/share/modules/init/bash; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1093	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1094	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1095
1096	elif [[ $remote_host = lctit ]]
1097	then
1098
1099	echo " " > ${remote_host}_last_make_protokoll
1100	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1101	do
1102	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1103	done
1104
1105	elif [[ $remote_host = lcxt4 ]]
1106	then
1107
1108	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1109
1110	else
1111
1112	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1113
1114	fi
1115
1116	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1117	then
1118	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1119	if [[ $silent = false ]]
1120	then
1121	answer=dummy
1122	printf "\n"
1123	while [[ "$answer" != c && "$answer" != k ]]
1124	do
1125	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1126	read answer
1127	if [[ "$answer" = l ]]
1128	then
1129	more ${remote_host}_last_make_protokoll
1130	fi
1131	done
1132	if [[ $answer = k ]]
1133	then
1134	locat=user_abort; exit
1135	fi
1136	fi
1137	fi
1138
1139
1140
1141	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1142	printf "\n *** tar update on remote host ..."
1143	if [[ $remote_host != lctit ]]
1144	then
1145	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1146	else
1147	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1148	# MIT SSH, DESHALB AUFRUF PER PIPE
1149	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1150	fi
1151
1152
1153	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1154	# printf "\n *** \"make clean\" on remote host ..."
1155	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1156	# printf "\n"
1157
1158
1159
1160
1161	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1162	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1163	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1164	elif [[ $compile_utility_programs = true ]]
1165	then
1166
1167	printf "\n\n"
1168	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1169	cd ${local_source_path}/../SCRIPTS
1170
1171	if [[ $remote_host != lctit ]]
1172	then
1173	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1174	else
1175	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1176	# MIT SSH, DESHALB AUFRUF PER PIPE
1177	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1178	fi
1179
1180	# KOPIEREN DER SCRIPTE
1181	if [[ $local_host = decalpha ]]
1182	then
1183	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1184	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1185	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1186	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1187	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1188	else
1189	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1190	fi
1191
1192	cd - > /dev/null
1193	cd ${local_source_path}/../UTIL
1194
1195
1196	# KOPIEREN DER UTILITY-PROGRAMME
1197	if [[ $local_host = decalpha ]]
1198	then
1199	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1200	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1201	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1202	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1203	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1204	else
1205	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1206	fi
1207
1208
1209
1210	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1211	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1212	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1213	# Z.B. DIE PFADE ZUM COMPILER)
1214	echo " *** execute \"make\" on remote host"
1215
1216	if [[ $remote_host = nech ]]
1217	then
1218	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1219	else
1220	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1221	fi
1222
1223	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1224	then
1225
1226	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1227
1228	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1229	then
1230
1231	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1232
1233	elif [[ $remote_host = lctit ]]
1234	then
1235
1236	echo " " > ${remote_host}_last_make_protokoll
1237	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1238	do
1239	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1240	done
1241
1242	else
1243
1244	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1245
1246	fi
1247
1248	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1249
1250	rm -rf ${remote_host}_last_make_protokoll
1251
1252	else
1253
1254	if [[ $compile_utility_programs = false ]]
1255	then
1256
1257	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1258	eval remote_md=$remote_md
1259	if [[ ! -d $remote_md ]]
1260	then
1261	if mkdir $remote_md
1262	then
1263	printf "\n\n *** directory for make depository:"
1264	printf "\n $remote_md"
1265	printf "\n was created\n"
1266	else
1267	printf "\n +++ directory for make depository:"
1268	printf "\n $remote_md"
1269	printf "\n cannot be created"
1270	locat=local_depository_path; exit
1271	fi
1272	fi
1273
1274	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1275	echo " "
1276	echo " *** updating sources in $remote_md"
1277	cd $remote_md
1278	cp $local_source_path/${mainprog}_sources.tar .
1279	tar xf ${mainprog}_sources.tar
1280
1281	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1282	echo " "
1283	echo " *** execute \"make\" on local host"
1284
1285	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1286
1287	if [[ $? != 0 ]]
1288	then
1289	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1290	if [[ $silent = false ]]
1291	then
1292	answer=dummy
1293	printf "\n"
1294	while [[ "$answer" != c && "$answer" != k ]]
1295	do
1296	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1297	read answer
1298	if [[ "$answer" = l ]]
1299	then
1300	more ${remote_host}_last_make_protokoll
1301	fi
1302	done
1303	if [[ $answer = k ]]
1304	then
1305	locat=user_abort; exit
1306	fi
1307	fi
1308	fi
1309
1310
1311	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1312	printf "\n *** tar update on local host ..."
1313	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1314
1315
1316	# COMPILE THE UTILITY PROGRAMS
1317	elif [[ $compile_utility_programs = true ]]
1318	then
1319	printf "\n\n"
1320	echo " *** compiling the utility programs ..."
1321	cd ${local_source_path}/../UTIL
1322	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1323	cd - > /dev/null
1324	fi
1325
1326	fi
1327
1328	fi
1329	done
1330
1331
1332	if [[ $host_found = false ]]
1333	then
1334	if [[ $host = all ]]
1335	then
1336	printf "\n +++ no hosts found in configuration file"
1337	else
1338	printf "\n +++ host \"$host\" not found in configuration file"
1339	fi
1340	locat=config_file; exit
1341	fi
1342
1343
1344
1345	# ABSCHLIESSENDE ARBEITEN
1346	rm -f hosts_found_in_config_file
1347

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |