Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 187

Last change on this file since 187 was 182, checked in by raasch, 16 years ago
further mpi-version adjustments for sgi-ice
Property svn:keywords set to `Id`
File size: 54.8 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 182 2008-08-04 09:07:43Z letzel $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90	# from configuration file
91	# host identifier (local_host) is read from config file
92	# 10/10/07 - Siggi - bugfix: handling of comment lines
93	# 18/07/08 - Siggi - adapted for lcsgih
94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95	# ({mainprog}_current_version)
96
97
98
99	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
100	compile_utility_programs=false
101	config_file=.mrun.config
102	fimm=false
103	host=all
104	host_found=false
105	ibm_hb_done=false
106	lcmuk_done=false
107	locat=normal
108	makefile=""
109	remote_mode=interactive
110	scirocco=false
111	silent=false
112	suf=f90
113	update=false
114	working_directory=`pwd`
115
116	typeset -i ih ihost=0
117
118	typeset -R30 calltime
119	typeset -L20 column1
120	typeset -L50 column2
121	typeset -L70 column3
122	typeset -L40 version="MBUILD 2.0 Rev$Rev: 116 $"
123
124	# FEHLERBEHANDLUNG
125	# BEI EXIT:
126	trap 'rm -rf $working_directory/tmp_mbuild
127	if [[ $locat != normal ]]
128	then
129	printf "\n\n +++ mbuild killed \n\n"
130	else
131	printf "\n\n *** mbuild finished \n\n"
132	fi' exit
133
134
135	# BEI TERMINAL-BREAK:
136	trap 'rm -rf $working_directory/tmp_mbuild
137	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
138	exit
139	' 2
140
141
142
143	# SHELLSCRIPT-OPTIONEN EINLESEN
144	while getopts :c:h:m:rs:u option
145	do
146	case $option in
147	(c) config_file=$OPTARG;;
148	(h) host=$OPTARG;;
149	(m) makefile=$OPTARG;;
150	(r) remote_mode=batch;;
151	(s) suf=$OPTARG;;
152	(u) compile_utility_programs=true;;
153	(\?) printf "\n +++ unknown option $OPTARG \n";
154	locat=parameter; exit;;
155	esac
156	done
157
158
159
160	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
161	if [[ $remote_mode = batch ]]
162	then
163	printf "\n +++ sorry, batch mode does not work! \n"
164	locat=parameter; exit
165	fi
166
167
168
169	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
170	if [[ ! -f $config_file ]]
171	then
172	printf "\n +++ configuration file: "
173	printf "\n $config_file"
174	printf "\n does not exist"
175	locat=configuration; exit
176	fi
177
178
179
180	# LOKALEN RECHNER ERMITTELN
181	local_host_real_name=$(hostname)
182	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
183
184
185
186	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
187	line=""
188	grep "%host_identifier" $config_file > tmp_mbuild
189	while read line
190	do
191	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
192	then
193	HOSTNAME=`echo $line \| cut -d" " -s -f2`
194	host_identifier=`echo $line \| cut -d" " -s -f3`
195	if [[ $local_host_real_name = $HOSTNAME ]]
196	then
197	local_host=$host_identifier
198	break
199	fi
200	fi
201	done < tmp_mbuild
202
203	if [[ "$local_host" = "" ]]
204	then
205	printf "\n +++ no host identifier found in configuration file \"$config_file\""
206	printf "\n for local host \"$local_host_real_name\"."
207	printf "\n Please add line"
208	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
209	printf "\n to the configuration file."
210	locat=local_host; exit
211	fi
212
213
214
215	[[ $local_host_real_name = scirocco ]] && scirocco=true
216	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
217
218
219
220	if [[ $local_host != ibms ]]
221	then
222	config_file=$PWD/$config_file
223	else
224	config_file=`pwd`/$config_file
225	fi
226
227
228
229	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
230	line=""
231	grep " $local_host" $config_file \| grep "%remote_username" > tmp_mbuild
232	while read line
233	do
234	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
235	then
236	local_username=`echo $line \| cut -d" " -s -f2`
237	fi
238	done < tmp_mbuild
239
240
241	if [[ "$local_username" = "" ]]
242	then
243	printf "\n +++ no user name found in configuration file"
244	printf "\n for local host \"$local_host\" "
245	locat=config_file; exit
246	fi
247
248
249	# LOKALEN QUELLTEXTPFAD ERMITTELN.
250	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
251	# VEREINBART WURDE.
252	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
253	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
254	line=""
255	grep "%" $config_file > tmp_mbuild
256	while read line
257	do
258	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
259	then
260	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
261	value=`echo $line \| cut -d" " -s -f2`
262	eval export $var=\$value
263	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
264	fi
265	done < tmp_mbuild
266
267	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
268	line=""
269	grep "%source_path" $config_file > tmp_mbuild
270	while read line
271	do
272	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
273	then
274	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
275	then
276	global_source_path=`echo $line \| cut -d" " -s -f2`
277	fi
278	fi
279	done < tmp_mbuild
280
281	line=""
282	grep " $local_host" $config_file \| grep "%source_path" > tmp_mbuild
283	while read line
284	do
285	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
286	then
287	local_source_path=`echo $line \| cut -d" " -s -f2`
288	fi
289	done < tmp_mbuild
290
291	if [[ "$local_source_path" = "" ]]
292	then
293	if [[ "$global_source_path" != "" ]]
294	then
295	local_source_path=$global_source_path
296	else
297	printf "\n +++ no source path found in configuration file"
298	printf "\n for local host \"$local_host\" "
299	printf "\n please set \"\%source_path\" in configuration file"
300	locat=config_file; exit
301	fi
302	fi
303	eval local_source_path=$local_source_path
304	eval local_source_path=$local_source_path
305
306
307	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
308	line=""
309	grep "%depository_path" $config_file > tmp_mbuild
310	while read line
311	do
312	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
313	then
314	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
315	then
316	global_depository_path=`echo $line \| cut -d" " -s -f2`
317	fi
318	fi
319	done < tmp_mbuild
320
321	line=""
322	grep " $local_host" $config_file \| grep "%depository_path" > tmp_mbuild
323	while read line
324	do
325	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
326	then
327	local_depository_path=`echo $line \| cut -d" " -s -f2`
328	fi
329	done < tmp_mbuild
330
331	if [[ "$local_depository_path" = "" ]]
332	then
333	if [[ "$global_depository_path" != "" ]]
334	then
335	local_depository_path=$global_depository_path
336	else
337	printf "\n +++ no depository path found in configuration file"
338	printf "\n for local host \"$local_host\" "
339	printf "\n please set \"\%depository_path\" in configuration file"
340	locat=config_file; exit
341	fi
342	fi
343	eval local_depository_path=$local_depository_path
344	eval local_depository_path=$local_depository_path
345
346
347
348	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
349	# VEREINBART WURDE
350	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
351	then
352	printf "\n +++ no main program or more than one main program defined"
353	printf "\n in configuration file"
354	locat=configuration; exit
355	else
356	line=`grep "%mainprog" $config_file`
357	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
358	then
359	printf "\n +++ no main program defined in configuration file"
360	locat=configuration; exit
361	fi
362	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
363	fi
364
365
366
367	# MAKEFILE vorhanden
368	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
369	if [[ ! -f $makefile ]]
370	then
371	printf "\n +++ makefile: "
372	printf "\n $makefile"
373	printf "\n does not exist"
374	locat=makefile; exit
375	fi
376
377
378	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
379	calltime=$(date)
380	printf "\n"
381	printf "#------------------------------------------------------------------------# \n"
382	printf "\| $version$calltime \| \n"
383	printf "\| \| \n"
384	column1="called on:"; column2=$local_host_real_name
385	printf "\| $column1$column2 \| \n"
386	column1="local username:"; column2=$local_username
387	printf "\| $column1$column2 \| \n"
388	column1="local IP-addres:"; column2=$local_addres
389	printf "\| $column1$column2 \| \n"
390	column1="config file:"; column2=$config_file
391	printf "\| $column1$column2 \| \n"
392	column1="makefile:"; column2=$makefile
393	printf "\| $column1$column2 \| \n"
394	column1="local source path:"; column2=$local_source_path
395	printf "\| $column1$column2 \| \n"
396	column1="make depository:"; column2=$local_depository_path
397	printf "\| $column1$column2 \| \n"
398	printf "#------------------------------------------------------------------------# \n"
399
400	# printf "\| \| \n"
401
402
403	if [[ $compile_utility_programs = false ]]
404	then
405
406	cd $local_source_path
407
408
409	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
410	source_code_files=`ls -1 *.$suf`
411
412
413
414	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
415	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
416	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
417	if [[ ! -d $local_depository_path ]]
418	then
419	if mkdir $local_depository_path
420	then
421	printf "\n\n *** directory for make depository:"
422	printf "\n $local_depository_path"
423	printf "\n was created\n"
424
425	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
426	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
427	printf "\n *** makefile and source code files are copied to"
428	printf "\n $local_depository_path\n"
429	printf "\n copying makefile \"$makefile\" ..."
430	cp -p $makefile $local_depository_path/Makefile
431
432	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
433	# SEIN
434	for filename in $source_code_files
435	do
436	if [[ $(grep -c $filename $makefile) = 0 ]]
437	then
438	printf "\n +++ source code file:"
439	printf "\n $filename"
440	printf "\n is not listed in makefile"
441	locat=makefile; exit
442	else
443	printf "\n copying source code file \"$filename\" ..."
444	cp -p $filename $local_depository_path
445	fi
446	done
447	printf "\n"
448	else
449	printf "\n +++ directory for make depository:"
450	printf "\n $local_depository_path"
451	printf "\n cannot be created"
452	locat=local_depository_path; exit
453	fi
454	else
455
456	printf "\n *** checking file status ..."
457
458	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
459	if [[ $makefile -nt $local_depository_path/Makefile ]]
460	then
461	printf "\n *** update of \"$makefile\" "
462	cp -f -p $makefile $local_depository_path/Makefile
463	update=true
464
465	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
466	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
467	cd $local_depository_path
468	source_code_files_in_depository=`ls -1 *.$suf`
469	for filename in $source_code_files_in_depository
470	do
471	if [[ $(grep -c $filename Makefile) = 0 ]]
472	then
473	printf "\n *** source code file in \"$local_depository_path\":"
474	printf "\n $filename"
475	printf "\n is not listed in makefile"
476	if [[ $silent = false ]]
477	then
478	answer=dummy
479	printf "\n\n"
480	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
481	do
482	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
483	read answer
484	done
485	if [[ $answer = y \|\| $answer = Y ]]
486	then
487	base=`echo $filename \| cut -d. -f2`
488	rm -f $filename
489	rm -f ${base}.o ${base}.mod
490	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
491	else
492	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
493	fi
494	fi
495	fi
496	done
497	cd - > /dev/null 2>&1
498
499	elif [[ $local_depository_path/Makefile -nt $makefile ]]
500	then
501	printf "\n *** makefile in depository is newer than"
502	printf "\n \"$makefile\" "
503	if [[ $silent = false ]]
504	then
505	answer=dummy
506	printf "\n\n"
507	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
508	do
509	printf " >>> update \"$makefile\" (y/n) ? "
510	read answer
511	done
512	if [[ $answer = y \|\| $answer = Y ]]
513	then
514	cp -f -p $local_depository_path/Makefile $makefile
515	printf "\n *** \"$makefile\" updated"
516	else
517	printf "\n *** \"$makefile\" not updated"
518	fi
519	fi
520	fi
521
522	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
523	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
524	for filename in $source_code_files
525	do
526	if [[ $(grep -c $filename $makefile) = 0 ]]
527	then
528	printf "\n +++ source code file:"
529	printf "\n $filename"
530	printf "\n is not listed in makefile"
531	locat=makefile; exit
532	else
533	if [[ ! -f $local_depository_path/$filename ]]
534	then
535	cp -p $filename $local_depository_path
536	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
537	fi
538	if [[ $filename -nt $local_depository_path/$filename ]]
539	then
540	printf "\n *** update of source code file \"$filename\" "
541	cp -f -p $filename $local_depository_path
542	update=true
543	fi
544	fi
545	done
546
547
548	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
549	# ODER EVTL. NEUEREN DATUMS SIND
550	cd $local_depository_path
551	source_code_files_in_depository=`ls -1 *.$suf`
552	cd - > /dev/null 2>&1
553	for filename in $source_code_files_in_depository
554	do
555	if [[ ! -f $filename ]]
556	then
557	printf "\n *** source code file \"$filename\" does not exist in current directory"
558	if [[ $silent = false ]]
559	then
560	answer=dummy
561	printf "\n\n"
562	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
563	do
564	printf " >>> create \"$filename\" in current directory (y/n) ? "
565	read answer
566	done
567	if [[ $answer = y \|\| $answer = Y ]]
568	then
569	cp -p $local_depository_path/$filename $filename
570	printf "\n *** source code file \"$filename\" created in current directory"
571	else
572	printf "\n *** source code file \"$filename\" not created in current directory"
573	fi
574	fi
575	elif [[ $local_depository_path/$filename -nt $filename ]]
576	then
577	ls -al $local_depository_path/$filename
578	ls -al $filename
579	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
580	if [[ $silent = false ]]
581	then
582	answer=dummy
583	printf "\n\n"
584	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
585	do
586	printf " >>> update \"$filename\" in current directory (y/n) ? "
587	read answer
588	done
589	if [[ $answer = y \|\| $answer = Y ]]
590	then
591	cp -f -p $local_depository_path/$filename $filename
592	printf "\n *** source code file \"$filename\" updated in current directory"
593	else
594	printf "\n *** source code file \"$filename\" not updated in current directory"
595	fi
596	fi
597	fi
598	done
599
600	if [[ $update = false ]]
601	then
602	printf "\n *** no updates necessary in \"$local_depository_path\" "
603	if [[ $silent = false ]]
604	then
605	answer=dummy
606	printf "\n\n"
607	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
608	do
609	printf " >>> continue with updates on remote hosts (y/n) ? "
610	read answer
611	done
612	if [[ $answer = n \|\| $answer = N ]]
613	then
614	locat=user_abort; exit
615	fi
616	fi
617	fi
618	fi
619
620
621
622	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
623	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
624	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
625	printf "\n\n *** tar of makefile and source files in depository ..."
626	cd $local_depository_path
627	chmod u+w Makefile *.$suf
628	tar -cf ${mainprog}_sources.tar Makefile *.$suf
629	printf "\n"
630
631	fi
632
633
634
635	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
636	if [[ $host = all ]]
637	then
638	printf "\n *** updates will be made for ALL hosts found in"
639	printf "\n the configuration file"
640	else
641	printf "\n *** update will be made for host \"$host\" "
642	fi
643
644	if [[ $silent = false ]]
645	then
646	answer=dummy
647	printf "\n\n"
648	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
649	do
650	printf " >>> continue (y/n) ? "
651	read answer
652	done
653	if [[ $answer = n \|\| $answer = N ]]
654	then
655	locat=user_abort; exit
656	fi
657	fi
658
659
660
661
662	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
663	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
664	printf "\n *** scanning configuration file for host(s) ..."
665
666	grep %fopts $config_file > tmp_mbuild
667	while read line
668	do
669	# KOMMENTARZEILEN UEBERSPRINGEN
670	[[ $(echo $line \| cut -c1) = "#" ]] && continue
671	(( ihost = ihost + 1 ))
672	hostline[$ihost]="$line"
673	done < tmp_mbuild
674
675
676	while (( ih < ihost ))
677	do
678
679	(( ih = ih + 1 ))
680
681	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
682	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
683	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
684	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
685	remote_host=`echo $remote_host_string \| cut -d" " -f1`
686	if [[ $host != all ]]
687	then
688	[[ $remote_host != $host ]] && continue
689	fi
690	host_found=true
691	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
692	if [[ $condition1 = $remote_host ]]
693	then
694	condition1=""
695	else
696	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
697	fi
698
699	netcdf_inc=""
700	netcdf_lib=""
701
702	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
703	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
704	then
705	if [[ $ibm_hb_done = true ]]
706	then
707	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
708	printf "\n been carried out on one of the HLRN machines\n"
709	continue
710	fi
711	fi
712
713	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
714	if [[ $remote_host = lcmuk ]]
715	then
716	if [[ $lcmuk_done = true ]]
717	then
718	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
719	printf "\n been carried out on this host\n"
720	continue
721	fi
722	fi
723
724
725	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
726	case $remote_host in
727	(lcmuk) remote_addres=130.75.105.2;;
728	(lcsgib) remote_addres=130.73.232.102;;
729	(lcsgih) remote_addres=130.75.4.102;;
730	(lctit) remote_addres=172.17.75.161;;
731	(decalpha) remote_addres=165.132.26.56;;
732	(ibmb) remote_addres=130.73.230.10;;
733	(ibmh) remote_addres=130.75.4.10;;
734	(ibms) remote_addres=150.183.5.101;;
735	(ibmy) remote_addres=165.132.26.58;;
736	(nech) remote_addres=136.172.44.192;;
737	(neck) remote_addres=133.5.178.11;;
738	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
739	(*) if [[ $local_host != $remote_host ]]
740	then
741	printf "\n +++ remote host \"$remote_host\" unknown";
742	printf "\n please inform S. Raasch!"
743	fi;;
744	esac
745
746
747	# REMOTE-USERNAMEN ERMITTELN
748	line=""
749	found=false
750	grep "$remote_host_string" $config_file \| grep "%remote_username" > tmp_mbuild
751	while read line1
752	do
753
754	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
755	then
756	line="$line1"
757	fi
758
759	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
760	then
761	remote_username=`echo $line \| cut -d" " -s -f2`
762	found=true
763	fi
764
765	done < tmp_mbuild
766
767	if [[ $found = false ]]
768	then
769	printf "\n +++ no remote username found in configuration file"
770	printf "\n for \"$remote_host_string\" "
771	locat=config_file; exit
772	fi
773
774
775	# REMOTE-QUELLTEXTPFAD ERMITTELN
776	line=""
777	remote_source_path=""
778	grep "$remote_host_string" $config_file \| grep "%source_path" > tmp_mbuild
779	while read line1
780	do
781
782	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
783	then
784	line="$line1"
785	fi
786
787	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
788	then
789	remote_source_path=`echo $line \| cut -d" " -s -f2`
790	fi
791
792	done < tmp_mbuild
793
794	if [[ "$remote_source_path" = "" ]]
795	then
796	if [[ "$global_source_path" != "" ]]
797	then
798	remote_source_path=$global_source_path
799	else
800	printf "\n +++ no source path found in configuration file"
801	printf "\n for \"$remote_host_string\" "
802	locat=config_file; exit
803	fi
804	fi
805
806	remote_ud=${remote_source_path}/../UTIL
807	remote_ud=$(eval echo $remote_ud)
808
809
810	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
811	remote_md=""
812	line=""
813	grep "$remote_host_string" $config_file \| grep "%depository_path" > tmp_mbuild
814	while read line1
815	do
816
817	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
818	then
819	line="$line1"
820	fi
821
822	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
823	then
824	remote_md=`echo $line \| cut -d" " -s -f2`
825	fi
826
827	done < tmp_mbuild
828
829	if [[ "$remote_md" = "" ]]
830	then
831	if [[ "$global_depository_path" != "" ]]
832	then
833	remote_md=$global_depository_path
834	else
835	printf "\n +++ no depository path found in configuration file"
836	printf "\n for \"$remote_host_string\" "
837	printf "\n please set \"\%depository_path\" in configuration file"
838	locat=config_file; exit
839	fi
840	fi
841
842	remote_md=$(eval echo $remote_md)
843
844
845	# COMPILERNAMEN ERMITTELN
846	line=""
847	found=false
848	grep "$remote_host_string" $config_file \| grep "%compiler_name " > tmp_mbuild
849	while read line1
850	do
851
852	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
853	then
854	line="$line1"
855	fi
856
857	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
858	then
859	compiler_name=`echo $line \| cut -d" " -s -f2`
860	found=true
861	fi
862
863	done < tmp_mbuild
864
865	if [[ $found = false ]]
866	then
867	printf "\n +++ no compiler name found in configuration file"
868	printf "\n for \"$remote_host_string\" "
869	locat=config_file; exit
870	fi
871
872
873	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
874	# SERIELLER COMPILERNAME ERMITTELT WERDEN
875	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
876	then
877	line=""
878	found=false
879	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > tmp_mbuild
880	while read line1
881	do
882
883	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
884	then
885	line="$line1"
886	fi
887
888	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
889	then
890	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
891	found=true
892	fi
893
894	done < tmp_mbuild
895
896	if [[ $found = false ]]
897	then
898	printf "\n +++ no serial compiler name found in configuration file"
899	printf "\n for \"$remote_host_string\" "
900	locat=config_file; exit
901	fi
902	else
903	compiler_name_ser=$compiler_name
904	fi
905
906
907
908	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
909	line=""
910	found=false
911	grep "$remote_host_string" $config_file \| grep "%cpp_options" > tmp_mbuild
912	while read line1
913	do
914
915	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
916	then
917	line="$line1"
918	fi
919
920	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
921	then
922	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
923	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
924	found=true
925	fi
926
927	done < tmp_mbuild
928
929	if [[ $found = false ]]
930	then
931	printf "\n +++ no preprocessor options found in configuration file"
932	printf "\n for \"$remote_host_string\" "
933	locat=config_file; exit
934	fi
935
936
937	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
938	for string in $remote_host_string
939	do
940	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
941	then
942	cpp_options="$cpp_options -D__lc "
943	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
944	then
945	cpp_options="${cpp_options},-D__ibm"
946	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
947	then
948	cpp_options="${cpp_options} -D__nec"
949	else
950	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
951	then
952	cpp_options="${cpp_options},-D__$string"
953	else
954	cpp_options="$cpp_options -D__$string "
955	fi
956	fi
957	done
958
959
960
961	# NETCDF-OPTIONEN ERMITTELN
962	line=""
963	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > tmp_mbuild
964	while read line1
965	do
966
967	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
968	then
969	line="$line1"
970	fi
971
972	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
973	then
974	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
975	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
976	fi
977
978	done < tmp_mbuild
979
980	line=""
981	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > tmp_mbuild
982	while read line1
983	do
984
985	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
986	then
987	line="$line1"
988	fi
989
990	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
991	then
992	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
993	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
994	fi
995
996	done < tmp_mbuild
997
998
999
1000	# COMPILEROPTIONEN ERMITTELN
1001	line=""
1002	found=false
1003	grep "$remote_host_string" $config_file \| grep "%fopts" > tmp_mbuild
1004	while read line1
1005	do
1006
1007	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1008	then
1009	line="$line1"
1010	fi
1011
1012	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1013	then
1014	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
1015	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
1016	found=true
1017
1018	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
1019	compiler_options="$compiler_options $netcdf_inc"
1020	fi
1021
1022	done < tmp_mbuild
1023
1024	if [[ $found = false ]]
1025	then
1026	printf "\n +++ no compiler options found in configuration file"
1027	printf "\n for \"$remote_host_string\" "
1028	locat=config_file; exit
1029	fi
1030
1031
1032
1033	# LADER-OPTIONEN ERMITTELN
1034	line=""
1035	found=false
1036	grep "$remote_host_string" $config_file \| grep "%lopts" > tmp_mbuild
1037	while read line1
1038	do
1039
1040	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1041	then
1042	line="$line1"
1043	fi
1044
1045	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1046	then
1047	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
1048	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
1049	found=true
1050
1051	# NETCDF-LIBRARY HINZUFUEGEN
1052	loader_options="$loader_options $netcdf_lib"
1053	fi
1054
1055	done < tmp_mbuild
1056
1057	if [[ $found = false ]]
1058	then
1059	printf "\n +++ no loader options found in configuration file"
1060	printf "\n for \"$remote_host_string\" "
1061	locat=config_file; exit
1062	fi
1063
1064
1065	printf "\n\n#------------------------------------------------------------------------# \n"
1066	if [[ $remote_host = $local_host ]]
1067	then
1068	column1="remote_host:"; column2="$remote_host (= local host!)"
1069	else
1070	column1="remote_host:"; column2=$remote_host
1071	fi
1072	printf "\| $column1$column2 \| \n"
1073	printf "\| \| \n"
1074	column1="conditions:"; column2="$condition1 $condition2"
1075	printf "\| $column1$column2 \| \n"
1076	column1="make depository:"; column2=$remote_md
1077	printf "\| $column1$column2 \| \n"
1078	if [[ $compile_utility_programs = true ]]
1079	then
1080	column1="utility directory:"; column2=$remote_ud
1081	printf "\| $column1$column2 \| \n"
1082	fi
1083	column1="username:"; column2=$remote_username
1084	printf "\| $column1$column2 \| \n"
1085	column1="addres:"; column2=$remote_addres
1086	printf "\| $column1$column2 \| \n"
1087	column1="compiler:"; column2=$compiler_name
1088	printf "\| $column1$column2 \| \n"
1089	if [[ $compile_utility_programs = true ]]
1090	then
1091	column1="serial compiler:"; column2=$compiler_name_ser
1092	printf "\| $column1$column2 \| \n"
1093	fi
1094	column1="cpp options:"; column2=$cpp_options
1095	printf "\| $column1$column2 \| \n"
1096	line=$(echo "$cpp_options" \| cut -c51-)
1097	while [[ "$line" != "" ]]
1098	do
1099	column1=""
1100	column2=$line
1101	printf "\| $column1$column2 \| \n"
1102	line=$(echo "$line" \| cut -c51-)
1103	done
1104	column1="compiler options:"; column2=$compiler_options
1105	printf "\| $column1$column2 \| \n"
1106	line=$(echo "$compiler_options" \| cut -c51-)
1107	while [[ "$line" != "" ]]
1108	do
1109	column1=""
1110	column2=$line
1111	printf "\| $column1$column2 \| \n"
1112	line=$(echo "$line" \| cut -c51-)
1113	done
1114	column1="loader options:"; column2=$loader_options
1115	printf "\| $column1$column2 \| \n"
1116	line=$(echo "$loader_options" \| cut -c51-)
1117	while [[ "$line" != "" ]]
1118	do
1119	column1=""
1120	column2=$line
1121	printf "\| $column1$column2 \| \n"
1122	line=$(echo "$line" \| cut -c51-)
1123	done
1124	printf "#------------------------------------------------------------------------# \n"
1125
1126	if [[ $silent = false ]]
1127	then
1128	answer=dummy
1129	printf "\n\n"
1130	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1131	do
1132	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1133	read answer
1134	done
1135	if [[ $answer = a \|\| $answer = A ]]
1136	then
1137	locat=user_abort; exit
1138	fi
1139	if [[ $answer = c \|\| $answer = C ]]
1140	then
1141	silent=false
1142	fi
1143	if [[ $answer = s \|\| $answer = S ]]
1144	then
1145	continue
1146	fi
1147	fi
1148
1149
1150	if [[ $remote_mode = batch ]]
1151	then
1152
1153	# BATCH-JOB PARAMETER SETZEN
1154	case $remote_host in
1155	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1156	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
1157	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1158	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1159	esac
1160
1161
1162	# BATCH-JOB ZUSAMMENSTELLEN
1163	printf "\n *** creating batch-job for remote host"
1164	echo " " > mbuild_job
1165
1166	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1167	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1168	if [[ $remote_host = t3ej2 ]]
1169	then
1170	echo "set +vx" >> mbuild_job
1171	echo ". .profile" >> mbuild_job
1172	echo "set -x" >> mbuild_job
1173	fi
1174
1175	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1176	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
1177	then
1178	echo "module list" >> mbuild_job
1179	fi
1180
1181
1182	# WECHSEL IN TEMPORAERES VERZEICHNIS
1183	echo "cd ${remote_md}" >> mbuild_job
1184
1185
1186	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1187	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
1188	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
1189
1190
1191	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1192	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
1193
1194
1195	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1196	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
1197
1198
1199	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1200	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
1201	echo "chmod u+w *" >> mbuild_job
1202
1203	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1204	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
1205
1206
1207	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1208	echo "make clean" >> mbuild_job
1209	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1210	echo "rm *.f90 Makefile" >> mbuild_job
1211
1212
1213
1214	# JOB MITTELS SUBJOB STARTEN
1215	printf "\n *** sending batch job to remote host"
1216	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1217
1218
1219	# JOBFILE LOESCHEN
1220	# rm aljob
1221
1222	else
1223
1224	if [[ $remote_host != $local_host ]]
1225	then
1226
1227	if [[ $compile_utility_programs = false ]]
1228	then
1229
1230	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1231	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1232	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1233	if [[ $remote_host != lctit ]]
1234	then
1235	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1236	else
1237	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1238	# MIT SSH, DESHALB AUFRUF PER PIPE
1239	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1240	fi
1241	if [[ $local_host = decalpha ]]
1242	then
1243	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1244	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1245	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1246	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1247	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1248	else
1249	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1250	fi
1251
1252
1253
1254	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1255	echo " *** untar previous update on remote host, if existing"
1256	if [[ $remote_host != lctit ]]
1257	then
1258	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1259	else
1260	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1261	# MIT SSH, DESHALB AUFRUF PER PIPE
1262	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1263	fi
1264
1265
1266	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1267	echo " *** untar actual sources on remote host"
1268	if [[ $remote_host != lctit ]]
1269	then
1270	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1271	else
1272	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1273	# MIT SSH, DESHALB AUFRUF PER PIPE
1274	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1275	fi
1276
1277
1278	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1279	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1280	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1281	# Z.B. DIE PFADE ZUM COMPILER)
1282	echo " *** execute \"make\" on remote host"
1283
1284	if [[ $remote_host = nech ]]
1285	then
1286	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1287	else
1288	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1289	fi
1290
1291	if [[ $remote_host = t3eh ]]
1292	then
1293
1294	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1295
1296	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1297	then
1298
1299	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1300
1301	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1302	then
1303
1304	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1305
1306	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1307	then
1308
1309	# print ". /usr/share/modules/init/bash; module load mvapich/mvapich-0.9.9-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1310	print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1311
1312	elif [[ $remote_host = lctit ]]
1313	then
1314
1315	echo " " > ${remote_host}_last_make_protokoll
1316	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1317	do
1318	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1319	done
1320
1321	else
1322
1323	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1324
1325	fi
1326
1327	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1328	then
1329	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1330	if [[ $silent = false ]]
1331	then
1332	answer=dummy
1333	printf "\n"
1334	while [[ "$answer" != c && "$answer" != k ]]
1335	do
1336	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1337	read answer
1338	if [[ "$answer" = l ]]
1339	then
1340	more ${remote_host}_last_make_protokoll
1341	fi
1342	done
1343	if [[ $answer = k ]]
1344	then
1345	locat=user_abort; exit
1346	fi
1347	fi
1348	fi
1349
1350
1351
1352	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1353	printf "\n *** tar update on remote host ..."
1354	if [[ $remote_host != lctit ]]
1355	then
1356	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1357	else
1358	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1359	# MIT SSH, DESHALB AUFRUF PER PIPE
1360	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1361	fi
1362
1363
1364	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1365	# printf "\n *** \"make clean\" on remote host ..."
1366	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1367	# printf "\n"
1368
1369
1370
1371
1372	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1373	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1374	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1375	elif [[ $compile_utility_programs = true ]]
1376	then
1377
1378	printf "\n\n"
1379	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1380	cd ${local_source_path}/../SCRIPTS
1381
1382	if [[ $remote_host != lctit ]]
1383	then
1384	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1385	else
1386	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1387	# MIT SSH, DESHALB AUFRUF PER PIPE
1388	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1389	fi
1390
1391	# KOPIEREN DER SCRIPTE
1392	if [[ $local_host = decalpha ]]
1393	then
1394	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1395	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1396	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1397	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1398	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1399	else
1400	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1401	fi
1402
1403	cd - > /dev/null
1404	cd ${local_source_path}/../UTIL
1405
1406
1407	# KOPIEREN DER UTILITY-PROGRAMME
1408	if [[ $local_host = decalpha ]]
1409	then
1410	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1411	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1412	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1413	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1414	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1415	else
1416	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1417	fi
1418
1419
1420
1421	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1422	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1423	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1424	# Z.B. DIE PFADE ZUM COMPILER)
1425	echo " *** execute \"make\" on remote host"
1426
1427	if [[ $remote_host = nech ]]
1428	then
1429	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1430	else
1431	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1432	fi
1433
1434	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1435	then
1436
1437	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1438
1439	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1440	then
1441
1442	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1443
1444	elif [[ $remote_host = lctit ]]
1445	then
1446
1447	echo " " > ${remote_host}_last_make_protokoll
1448	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1449	do
1450	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1451	done
1452
1453	else
1454
1455	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1456
1457	fi
1458
1459	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1460
1461	rm -rf ${remote_host}_last_make_protokoll
1462
1463	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1464	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
1465
1466	else
1467
1468	if [[ $compile_utility_programs = false ]]
1469	then
1470
1471	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1472	echo " "
1473	echo " *** execute \"make\" on local host"
1474
1475	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1476
1477	if [[ $? != 0 ]]
1478	then
1479	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1480	if [[ $silent = false ]]
1481	then
1482	answer=dummy
1483	printf "\n"
1484	while [[ "$answer" != c && "$answer" != k ]]
1485	do
1486	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1487	read answer
1488	if [[ "$answer" = l ]]
1489	then
1490	more ${remote_host}_last_make_protokoll
1491	fi
1492	done
1493	if [[ $answer = k ]]
1494	then
1495	locat=user_abort; exit
1496	fi
1497	fi
1498	fi
1499
1500
1501	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1502	printf "\n *** tar update on local host ..."
1503	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1504
1505
1506	# COMPILE THE UTILITY PROGRAMS
1507	elif [[ $compile_utility_programs = true ]]
1508	then
1509	printf "\n\n"
1510	echo " *** compiling the utility programs ..."
1511	cd ${local_source_path}/../UTIL
1512	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1513	cd - > /dev/null
1514	fi
1515
1516
1517	# NUR EINMAL AUF LCMUK UEBERSETZEN
1518	[[ $remote_host = lcmuk ]] && lcmuk_done=true
1519
1520	fi
1521
1522	fi
1523	done
1524
1525
1526	if [[ $host_found = false ]]
1527	then
1528	if [[ $host = all ]]
1529	then
1530	printf "\n +++ no hosts found in configuration file"
1531	else
1532	printf "\n +++ host \"$host\" not found in configuration file"
1533	fi
1534	locat=config_file; exit
1535	fi
1536
1537
1538
1539	# ABSCHLIESSENDE ARBEITEN
1540	rm -f hosts_found_in_config_file
1541

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |