Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 812

Last change on this file since 812 was 811, checked in by maronga, 13 years ago
bugfix in mbuild (utility compilation), bugfix in mrungui
Property svn:keywords set to `Id Rev`
File size: 51.3 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 811 2012-01-31 09:45:54Z maronga $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119	# 04/03/11 - BjornM- re-adjustments for lcxt4
120	# 06/03/11 - Siggi - adjustments for ibmkisti
121	# 03/04/11 - Micha - added lckordi
122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
126	# check program) has been added to the utility branch),
127	# modfified the compilation of mrungui
128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
129	# multiple localhost branches
130
131
132
133	# VARIABLE DECLARATIONS + DEFAULT VALUES
134	compile_utility_programs=false
135	config_file=.mrun.config
136	fimm=false
137	host=all
138	host_found=false
139	locat=normal
140	makefile=""
141	module_calls=""
142	util_compiled_localhost=false
143	scirocco=false
144	silent=false
145	suf=f90
146	update=false
147	working_directory=`pwd`
148
149	typeset -i ih ihost=0
150
151	typeset -R30 calltime
152	typeset -L20 column1
153	typeset -L50 column2
154	typeset -L70 column3
155	typeset -L40 version="MBUILD 2.1 Rev$Rev: 811 $"
156
157	# ERROR HANDLING
158	# IN CASE OF EXIT:
159	trap 'rm -rf $working_directory/tmp_mbuild
160	if [[ $locat != normal ]]
161	then
162	printf "\n\n +++ mbuild killed \n\n"
163	else
164	printf "\n\n *** mbuild finished \n\n"
165	fi' exit
166
167
168	# IN CASE OF TERMINAL-BREAK:
169	trap 'rm -rf $working_directory/tmp_mbuild
170	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
171	exit
172	' 2
173
174
175	tmp_mbuild=${working_directory}/tmp_mbuild
176
177	# READ SHELLSCRIPT-OPTIONS
178	while getopts :c:h:m:s:u option
179	do
180	case $option in
181	(c) config_file=$OPTARG;;
182	(h) host=$OPTARG;;
183	(m) makefile=$OPTARG;;
184	(s) suf=$OPTARG;;
185	(u) compile_utility_programs=true;;
186	(\?) printf "\n +++ unknown option $OPTARG \n";
187	locat=parameter; exit;;
188	esac
189	done
190
191
192
193	# CHECK, IF CONFIGURATION-FILE EXISTS
194	if [[ ! -f $config_file ]]
195	then
196	printf "\n +++ configuration file: "
197	printf "\n $config_file"
198	printf "\n does not exist"
199	locat=configuration; exit
200	fi
201
202
203
204	# DETERMINE THE LOCAL HOST
205	local_host_real_name=$(hostname)
206	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
207
208
209
210	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
211	line=""
212	grep "%host_identifier" $config_file > $tmp_mbuild
213	while read line
214	do
215	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
216	then
217	HOSTNAME=`echo $line \| cut -d" " -s -f2`
218	host_identifier=`echo $line \| cut -d" " -s -f3`
219	if [[ $local_host_real_name = $HOSTNAME ]]
220	then
221	local_host=$host_identifier
222	break
223	fi
224	fi
225	done < $tmp_mbuild
226
227	if [[ "$local_host" = "" ]]
228	then
229	printf "\n +++ no host identifier found in configuration file \"$config_file\""
230	printf "\n for local host \"$local_host_real_name\"."
231	printf "\n Please add line"
232	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
233	printf "\n to the configuration file."
234	locat=local_host; exit
235	fi
236
237
238
239	[[ $local_host_real_name = scirocco ]] && scirocco=true
240	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
241
242
243
244	if [[ $local_host != ibms ]]
245	then
246	config_file=$PWD/$config_file
247	else
248	config_file=`pwd`/$config_file
249	fi
250
251
252
253	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
254	line=""
255	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
256	while read line
257	do
258	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
259	then
260	local_username=`echo $line \| cut -d" " -s -f2`
261	fi
262	done < $tmp_mbuild
263
264
265	if [[ "$local_username" = "" ]]
266	then
267	printf "\n +++ no user name found in configuration file"
268	printf "\n for local host \"$local_host\" "
269	locat=config_file; exit
270	fi
271
272
273	# DETERMINE LOCAL SOURCE-CODE PATH.
274	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
275	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
276	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
277	line=""
278	grep "%" $config_file > $tmp_mbuild
279	while read line
280	do
281	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
282	then
283	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
284	value=`echo $line \| cut -d" " -s -f2`
285	eval export $var=\$value
286	fi
287	done < $tmp_mbuild
288
289	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
290	line=""
291	grep "%source_path" $config_file > $tmp_mbuild
292	while read line
293	do
294	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
295	then
296	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
297	then
298	global_source_path=`echo $line \| cut -d" " -s -f2`
299	fi
300	fi
301	done < $tmp_mbuild
302
303	line=""
304	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
305	while read line
306	do
307	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
308	then
309	local_source_path=`echo $line \| cut -d" " -s -f2`
310	fi
311	done < $tmp_mbuild
312
313	if [[ "$local_source_path" = "" ]]
314	then
315	if [[ "$global_source_path" != "" ]]
316	then
317	local_source_path=$global_source_path
318	else
319	printf "\n +++ no source path found in configuration file"
320	printf "\n for local host \"$local_host\" "
321	printf "\n please set \"\%source_path\" in configuration file"
322	locat=config_file; exit
323	fi
324	fi
325	eval local_source_path=$local_source_path
326	eval local_source_path=$local_source_path
327
328
329
330	# DETERMINE GLOBAL DEPOSITORY-PATH
331	line=""
332	grep "%depository_path" $config_file > $tmp_mbuild
333	while read line
334	do
335	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
336	then
337	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
338	then
339	global_depository_path=`echo $line \| cut -d" " -s -f2`
340	fi
341	fi
342	done < $tmp_mbuild
343
344	if [[ $found = false ]]
345	then
346	printf "\n +++ no \%depository_path found in"
347	printf "\n $config_file"
348	locat=depository_path; exit
349	fi
350
351	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
352	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
353	then
354	printf "\n +++ no main program or more than one main program defined"
355	printf "\n in configuration file"
356	locat=configuration; exit
357	else
358	line=`grep "%mainprog" $config_file`
359	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
360	then
361	printf "\n +++ no main program defined in configuration file"
362	locat=configuration; exit
363	fi
364	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
365	fi
366
367
368
369	# CHECK IF MAKEFILE EXITS
370	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
371	if [[ ! -f $makefile ]]
372	then
373	printf "\n +++ makefile: "
374	printf "\n $makefile"
375	printf "\n does not exist"
376	locat=makefile; exit
377	fi
378
379
380	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
381	calltime=$(date)
382	printf "\n"
383	printf "#------------------------------------------------------------------------# \n"
384	printf "\| $version$calltime \| \n"
385	printf "\| \| \n"
386	column1="called on:"; column2=$local_host_real_name
387	printf "\| $column1$column2 \| \n"
388	column1="local username:"; column2=$local_username
389	printf "\| $column1$column2 \| \n"
390	column1="local IP-addres:"; column2=$local_addres
391	printf "\| $column1$column2 \| \n"
392	column1="config file:"; column2=$config_file
393	printf "\| $column1$column2 \| \n"
394	column1="makefile:"; column2=$makefile
395	printf "\| $column1$column2 \| \n"
396	column1="local source path:"; column2=$local_source_path
397	printf "\| $column1$column2 \| \n"
398	printf "#------------------------------------------------------------------------# \n"
399
400	# printf "\| \| \n"
401
402
403	if [[ $compile_utility_programs = false ]]
404	then
405
406	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
407	# WITH OVERWRITING FILES ON THE REMOTE HOST
408	cd $local_source_path
409	printf "\n\n *** tar of makefile and source files in $local_source_path"
410	tar -cf ${mainprog}_sources.tar Makefile *.$suf
411	printf "\n"
412
413	else
414	cd $local_source_path
415	printf "\n\n *** tar of makefile and source files in $local_source_path"
416
417	cat Makefile_check\|while read line
418	do
419	line=$(echo $line\|grep RCS)
420	if [[ $line == "RCS" ]]
421	then
422	line=$(echo $line\|sed 's/RCS = //g')
423	break
424	fi
425	done
426
427	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
428	printf "\n"
429	fi
430
431
432
433	# GET CONFIRMATION TO CONTINUE
434	if [[ $host = all ]]
435	then
436	printf "\n *** updates will be made for ALL hosts found in"
437	printf "\n the configuration file"
438	else
439	printf "\n *** update will be made for host \"$host\" "
440	fi
441
442	if [[ $silent = false ]]
443	then
444	answer=dummy
445	printf "\n\n"
446	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
447	do
448	printf " >>> continue (y/n) ? "
449	read answer
450	done
451	if [[ $answer = n \|\| $answer = N ]]
452	then
453	locat=user_abort; exit
454	fi
455	fi
456
457
458
459
460	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
461	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
462	printf "\n *** scanning configuration file for host(s) ..."
463
464	grep %fopts $config_file > $tmp_mbuild
465	while read line
466	do
467	# KOMMENTARZEILEN UEBERSPRINGEN
468	[[ $(echo $line \| cut -c1) = "#" ]] && continue
469	(( ihost = ihost + 1 ))
470	hostline[$ihost]="$line"
471	done < $tmp_mbuild
472
473
474	while (( ih < ihost ))
475	do
476
477	(( ih = ih + 1 ))
478
479	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
480	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
481	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
482	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
483	remote_host=`echo $remote_host_string \| cut -d" " -f1`
484	if [[ $host != all ]]
485	then
486	[[ $remote_host != $host ]] && continue
487	fi
488	host_found=true
489	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
490	if [[ $condition1 = $remote_host ]]
491	then
492	condition1=""
493	else
494	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
495	fi
496
497	modules=""
498	netcdf_inc=""
499	netcdf_lib=""
500	make_options=""
501
502	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
503	case $remote_host in
504	(lckordi) remote_adress=210.219.61.8;;
505	(lcmuk) remote_addres=130.75.105.2;;
506	(lcrte) remote_addres=133.5.185.60;;
507	(lcsgib) remote_addres=130.73.232.102;;
508	(lcsgih) remote_addres=130.75.4.101;;
509	(lck) remote_addres=165.132.26.61;;
510	(lctit) remote_addres=10.1.6.170;;
511	(lcxt4) remote_addres=129.177.20.113;;
512	(lcxt5m) remote_addres=193.166.211.144;;
513	(decalpha) remote_addres=165.132.26.56;;
514	(ibmh) remote_addres=136.172.40.15;;
515	(ibmkisti) remote_addres=150.183.146.24;;
516	(ibmku) remote_addres=133.5.4.129;;
517	(ibms) remote_addres=150.183.5.101;;
518	(ibmy) remote_addres=165.132.26.58;;
519	(nech) remote_addres=136.172.44.192;;
520	(neck) remote_addres=133.5.178.11;;
521	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
522	(*) if [[ $local_host != $remote_host ]]
523	then
524	printf "\n +++ remote host \"$remote_host\" unknown";
525	printf "\n please inform PALM group support!"
526	fi;;
527	esac
528
529
530	# REMOTE-USERNAMEN ERMITTELN
531	line=""
532	found=false
533	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
534	while read line1
535	do
536
537	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
538	then
539	line="$line1"
540	fi
541
542	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
543	then
544	remote_username=`echo $line \| cut -d" " -s -f2`
545	found=true
546	fi
547
548	done < $tmp_mbuild
549
550	if [[ $found = false ]]
551	then
552	printf "\n +++ no remote username found in configuration file"
553	printf "\n for \"$remote_host_string\" "
554	locat=config_file; exit
555	fi
556
557
558	# REMOTE-QUELLTEXTPFAD ERMITTELN
559	line=""
560	remote_source_path=""
561	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
562	while read line1
563	do
564
565	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
566	then
567	line="$line1"
568	fi
569
570	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
571	then
572	remote_source_path=`echo $line \| cut -d" " -s -f2`
573	fi
574
575	done < $tmp_mbuild
576
577	if [[ "$remote_source_path" = "" ]]
578	then
579	if [[ "$global_source_path" != "" ]]
580	then
581	remote_source_path=$global_source_path
582	else
583	printf "\n +++ no source path found in configuration file"
584	printf "\n for \"$remote_host_string\" "
585	locat=config_file; exit
586	fi
587	fi
588
589	remote_ud=${remote_source_path}/../UTIL
590	remote_ud=$(eval echo $remote_ud)
591
592
593	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
594	remote_md=""
595	line=""
596	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
597	while read line1
598	do
599
600	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
601	then
602	line="$line1"
603	fi
604
605	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
606	then
607	remote_md=`echo $line \| cut -d" " -s -f2`
608	fi
609
610	done < $tmp_mbuild
611
612	if [[ "$remote_md" = "" ]]
613	then
614	if [[ "$global_depository_path" != "" ]]
615	then
616	remote_md=$global_depository_path
617	else
618	printf "\n +++ no depository path found in configuration file"
619	printf "\n for \"$remote_host_string\" "
620	printf "\n please set \"\%depository_path\" in configuration file"
621	locat=config_file; exit
622	fi
623	fi
624
625	remote_md=$(eval echo $remote_md)
626	block=""
627	[[ "$condition1" != "" ]] && block=_$condition1
628	[[ "$condition2" != "" ]] && block=${block}_$condition2
629	remote_md=${remote_md}$block
630
631
632	# COMPILERNAMEN ERMITTELN
633	line=""
634	found=false
635	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
636	while read line1
637	do
638
639	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
640	then
641	line="$line1"
642	fi
643
644	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
645	then
646	compiler_name=`echo $line \| cut -d" " -s -f2`
647	found=true
648	fi
649
650	done < $tmp_mbuild
651
652	if [[ $found = false ]]
653	then
654	printf "\n +++ no compiler name found in configuration file"
655	printf "\n for \"$remote_host_string\" "
656	locat=config_file; exit
657	fi
658
659
660	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
661	# SERIELLER COMPILERNAME ERMITTELT WERDEN
662	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
663	then
664	line=""
665	found=false
666	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
667	while read line1
668	do
669
670	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
671	then
672	line="$line1"
673	fi
674
675	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
676	then
677	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
678	found=true
679	fi
680
681	done < $tmp_mbuild
682
683	if [[ $found = false ]]
684	then
685	printf "\n +++ no serial compiler name found in configuration file"
686	printf "\n for \"$remote_host_string\" "
687	locat=config_file; exit
688	fi
689	else
690	compiler_name_ser=$compiler_name
691	fi
692
693
694
695	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
696	line=""
697	found=false
698	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
699	while read line1
700	do
701
702	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
703	then
704	line="$line1"
705	fi
706
707	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
708	then
709	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
710	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
711	found=true
712	fi
713
714	done < $tmp_mbuild
715
716	if [[ $found = false ]]
717	then
718	printf "\n +++ no preprocessor options found in configuration file"
719	printf "\n for \"$remote_host_string\" "
720	locat=config_file; exit
721	fi
722
723
724	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
725	for string in $remote_host_string
726	do
727	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
728	then
729	cpp_options="$cpp_options -D__lc "
730	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
731	then
732	cpp_options="${cpp_options},-D__ibm"
733	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
734	then
735	cpp_options="${cpp_options} -D__nec"
736	else
737	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
738	then
739	cpp_options="${cpp_options},-D__$string"
740	else
741	cpp_options="$cpp_options -D__$string "
742	fi
743	fi
744	done
745
746
747
748	# NETCDF-OPTIONEN ERMITTELN
749	line=""
750	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
751	while read line1
752	do
753
754	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
755	then
756	line="$line1"
757	fi
758
759	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
760	then
761	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
762	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
763	fi
764
765	done < $tmp_mbuild
766
767	line=""
768	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
769	while read line1
770	do
771
772	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
773	then
774	line="$line1"
775	fi
776
777	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
778	then
779	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
780	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
781	fi
782
783	done < $tmp_mbuild
784
785
786
787	# get make options
788	line=""
789	found=false
790	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
791	while read line1
792	do
793
794	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
795	then
796	line="$line1"
797	fi
798
799	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
800	then
801	# remove colons from directive string
802	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
803
804	fi
805
806	done < $tmp_mbuild
807
808
809
810	# COMPILEROPTIONEN ERMITTELN
811	line=""
812	found=false
813	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
814	while read line1
815	do
816
817	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
818	then
819	line="$line1"
820	fi
821
822	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
823	then
824	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
825	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
826	found=true
827
828	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
829	compiler_options="$compiler_options $netcdf_inc"
830	fi
831
832	done < $tmp_mbuild
833
834	if [[ $found = false ]]
835	then
836	printf "\n +++ no compiler options found in configuration file"
837	printf "\n for \"$remote_host_string\" "
838	locat=config_file; exit
839	fi
840
841
842
843	# get modules to be loaded
844	line=""
845	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
846	while read line1
847	do
848
849	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
850	then
851	line="$line1"
852	fi
853
854	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
855	then
856	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
857	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
858	fi
859
860	done < $tmp_mbuild
861
862
863
864
865	# LADER-OPTIONEN ERMITTELN
866	line=""
867	found=false
868	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
869	while read line1
870	do
871
872	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
873	then
874	line="$line1"
875	fi
876
877	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
878	then
879	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
880	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
881	found=true
882
883	# NETCDF-LIBRARY HINZUFUEGEN
884	loader_options="$loader_options $netcdf_lib"
885	fi
886
887	done < $tmp_mbuild
888
889	if [[ $found = false ]]
890	then
891	printf "\n +++ no loader options found in configuration file"
892	printf "\n for \"$remote_host_string\" "
893	locat=config_file; exit
894	fi
895
896
897	printf "\n\n#------------------------------------------------------------------------# \n"
898	if [[ $remote_host = $local_host ]]
899	then
900	column1="remote_host:"; column2="$remote_host (= local host!)"
901	else
902	column1="remote_host:"; column2=$remote_host
903	fi
904	printf "\| $column1$column2 \| \n"
905	printf "\| \| \n"
906	column1="conditions:"; column2="$condition1 $condition2"
907	printf "\| $column1$column2 \| \n"
908	column1="make depository:"; column2=$remote_md
909	printf "\| $column1$column2 \| \n"
910	line=$(echo "$remote_md" \| cut -c51-)
911	while [[ "$line" != "" ]]
912	do
913	column1=""
914	column2=$line
915	printf "\| $column1$column2 \| \n"
916	line=$(echo "$line" \| cut -c51-)
917	done
918	if [[ $compile_utility_programs = true ]]
919	then
920	column1="utility directory:"; column2=$remote_ud
921	printf "\| $column1$column2 \| \n"
922	fi
923	column1="username:"; column2=$remote_username
924	printf "\| $column1$column2 \| \n"
925	column1="addres:"; column2=$remote_addres
926	printf "\| $column1$column2 \| \n"
927	column1="compiler:"; column2=$compiler_name
928	printf "\| $column1$column2 \| \n"
929	if [[ $compile_utility_programs = true ]]
930	then
931	column1="serial compiler:"; column2=$compiler_name_ser
932	printf "\| $column1$column2 \| \n"
933	fi
934	if [[ "$make_options" != "" ]]
935	then
936	column1="make options:"; column2=$make_options
937	printf "\| $column1$column2 \| \n"
938	fi
939	column1="cpp options:"; column2=$cpp_options
940	printf "\| $column1$column2 \| \n"
941	line=$(echo "$cpp_options" \| cut -c51-)
942	while [[ "$line" != "" ]]
943	do
944	column1=""
945	column2=$line
946	printf "\| $column1$column2 \| \n"
947	line=$(echo "$line" \| cut -c51-)
948	done
949	column1="compiler options:"; column2=$compiler_options
950	printf "\| $column1$column2 \| \n"
951	line=$(echo "$compiler_options" \| cut -c51-)
952	while [[ "$line" != "" ]]
953	do
954	column1=""
955	column2=$line
956	printf "\| $column1$column2 \| \n"
957	line=$(echo "$line" \| cut -c51-)
958	done
959	column1="loader options:"; column2=$loader_options
960	printf "\| $column1$column2 \| \n"
961	line=$(echo "$loader_options" \| cut -c51-)
962	while [[ "$line" != "" ]]
963	do
964	column1=""
965	column2=$line
966	printf "\| $column1$column2 \| \n"
967	line=$(echo "$line" \| cut -c51-)
968	done
969	if [[ $modules != "" ]]
970	then
971	column1="modules to be load:"; column2=$modules
972	printf "\| $column1$column2 \| \n"
973	line=$(echo "$modules" \| cut -c51-)
974	while [[ "$line" != "" ]]
975	do
976	column1=""
977	column2=$line
978	printf "\| $column1$column2 \| \n"
979	line=$(echo "$line" \| cut -c51-)
980	done
981	fi
982	printf "#------------------------------------------------------------------------# \n"
983
984	if [[ $silent = false ]]
985	then
986	answer=dummy
987	printf "\n\n"
988	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
989	do
990	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
991	read answer
992	done
993	if [[ $answer = a \|\| $answer = A ]]
994	then
995	locat=user_abort; exit
996	fi
997	if [[ $answer = c \|\| $answer = C ]]
998	then
999	silent=true
1000	fi
1001	if [[ $answer = s \|\| $answer = S ]]
1002	then
1003	continue
1004	fi
1005	fi
1006
1007
1008	# make on remote host
1009	if [[ $remote_host != $local_host ]]
1010	then
1011
1012	if [[ $compile_utility_programs = false ]]
1013	then
1014
1015	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1016	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1017	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1018	if [[ $remote_host != lctit ]]
1019	then
1020	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1021	else
1022	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1023	# MIT SSH, DESHALB AUFRUF PER PIPE
1024	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1025	fi
1026	if [[ $local_host = decalpha ]]
1027	then
1028	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1029	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1030	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1031	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1032	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1033	else
1034	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1035	fi
1036
1037
1038
1039	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1040	echo " *** untar previous update on remote host, if existing"
1041	if [[ $remote_host != lctit ]]
1042	then
1043	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1044	else
1045	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1046	# MIT SSH, DESHALB AUFRUF PER PIPE
1047	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1048	fi
1049
1050
1051	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1052	echo " *** untar actual sources on remote host"
1053	if [[ $remote_host != lctit ]]
1054	then
1055	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1056	else
1057	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1058	# MIT SSH, DESHALB AUFRUF PER PIPE
1059	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1060	fi
1061
1062
1063	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1064	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1065	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1066	# Z.B. DIE PFADE ZUM COMPILER)
1067	echo " *** execute \"make\" on remote host"
1068
1069
1070	# generate make call with make options
1071	if [[ $remote_host = nech ]]
1072	then
1073	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1074	else
1075	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1076	fi
1077
1078	# generate command to load modules, if modules are given
1079	if [[ "$modules" != "" ]]
1080	then
1081	if [[ $remote_host = lctit ]]
1082	then
1083	module_calls=". $modules"
1084	else
1085	module_calls="module load ${modules};"
1086	fi
1087
1088	# bugfix for wrong netcdf module
1089	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1090	then
1091	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1092	then
1093	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1094	fi
1095	fi
1096	else
1097	module_calls=""
1098	fi
1099
1100	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1101	then
1102
1103	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1104
1105	elif [[ $remote_host = ibmh ]]
1106	then
1107
1108	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1109
1110	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1111	then
1112
1113	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1114	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1115
1116	elif [[ $remote_host = lctit ]]
1117	then
1118
1119	echo " " > ${remote_host}_last_make_protokoll
1120	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1121	do
1122	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1123	done
1124
1125	elif [[ $remote_host = lcxt4 ]]
1126	then
1127
1128	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1129
1130	else
1131
1132	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1133
1134	fi
1135
1136	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1137	then
1138	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1139	if [[ $silent = false ]]
1140	then
1141	answer=dummy
1142	printf "\n"
1143	while [[ "$answer" != c && "$answer" != k ]]
1144	do
1145	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1146	read answer
1147	if [[ "$answer" = l ]]
1148	then
1149	more ${remote_host}_last_make_protokoll
1150	fi
1151	done
1152	if [[ $answer = k ]]
1153	then
1154	locat=user_abort; exit
1155	fi
1156	fi
1157	fi
1158
1159
1160
1161	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1162	printf "\n *** tar update on remote host ..."
1163	if [[ $remote_host != lctit ]]
1164	then
1165	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1166	else
1167	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1168	# MIT SSH, DESHALB AUFRUF PER PIPE
1169	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1170	fi
1171
1172
1173	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1174	# printf "\n *** \"make clean\" on remote host ..."
1175	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1176	# printf "\n"
1177
1178
1179
1180
1181	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1182	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1183	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1184	elif [[ $compile_utility_programs = true ]]
1185	then
1186
1187	printf "\n\n"
1188	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1189	cd ${local_source_path}/../SCRIPTS
1190
1191	if [[ $remote_host != lctit ]]
1192	then
1193	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1194	else
1195	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1196	# MIT SSH, DESHALB AUFRUF PER PIPE
1197	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1198	fi
1199
1200	# KOPIEREN DER SCRIPTE
1201	if [[ $local_host = decalpha ]]
1202	then
1203	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1204	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1205	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1206	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1207	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1208	else
1209	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1210	fi
1211
1212	cd - > /dev/null
1213	cd ${local_source_path}/../UTIL
1214
1215
1216	# KOPIEREN DER UTILITY-PROGRAMME
1217	if [[ $local_host = decalpha ]]
1218	then
1219	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1220	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1221	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1222	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1223	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1224	else
1225	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1226	fi
1227
1228
1229
1230	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1231	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1232	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1233	# Z.B. DIE PFADE ZUM COMPILER)
1234	echo " *** execute \"make\" on remote host"
1235
1236	if [[ $remote_host = nech ]]
1237	then
1238	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1239	else
1240	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1241	fi
1242
1243	# generate command to load modules, if modules are given
1244	if [[ "$modules" != "" ]]
1245	then
1246	if [[ $remote_host = lctit ]]
1247	then
1248	module_calls=". $modules"
1249	else
1250	module_calls="module load ${modules};"
1251	fi
1252
1253	# bugfix for wrong netcdf module
1254	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1255	then
1256	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1257	then
1258	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1259	fi
1260	fi
1261	else
1262	module_calls=""
1263	fi
1264
1265	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1266	then
1267
1268	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1269
1270	elif [[ $remote_host = ibmh ]]
1271	then
1272
1273	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1274
1275	elif [[ $remote_host = lctit ]]
1276	then
1277
1278	echo " " > ${remote_host}_last_make_protokoll
1279	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1280	do
1281	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1282	done
1283
1284	elif [[ $remote_host = lcxt4 ]]
1285	then
1286
1287	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1288
1289	else
1290
1291	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1292
1293	fi
1294
1295	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1296
1297	rm -rf ${remote_host}_last_make_protokoll
1298
1299	# make on local host
1300	else
1301
1302	# workaround for lcxt4
1303	if [[ $remote_host = lcxt4 ]]
1304	then
1305	. /opt/modules/default/init/ksh
1306	fi
1307
1308	# first load modules, if given
1309	if [[ "$modules" != "" ]]
1310	then
1311	if [[ $remote_host = lctit ]]
1312	then
1313	. $modules
1314	else
1315	module load ${modules}
1316	fi
1317	fi
1318
1319
1320	if [[ $compile_utility_programs = false ]]
1321	then
1322
1323	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1324	eval remote_md=$remote_md
1325	if [[ ! -d $remote_md ]]
1326	then
1327	if mkdir $remote_md
1328	then
1329	printf "\n\n *** directory for make depository:"
1330	printf "\n $remote_md"
1331	printf "\n was created\n"
1332	else
1333	printf "\n +++ directory for make depository:"
1334	printf "\n $remote_md"
1335	printf "\n cannot be created"
1336	locat=local_depository_path; exit
1337	fi
1338	fi
1339
1340	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1341	echo " "
1342	echo " *** updating sources in $remote_md"
1343	cd $remote_md
1344	cp $local_source_path/${mainprog}_sources.tar .
1345	tar xf ${mainprog}_sources.tar
1346
1347	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1348	echo " "
1349	echo " *** execute \"make\" on local host"
1350
1351	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1352
1353	if [[ $? != 0 ]]
1354	then
1355	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1356	if [[ $silent = false ]]
1357	then
1358	answer=dummy
1359	printf "\n"
1360	while [[ "$answer" != c && "$answer" != k ]]
1361	do
1362	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1363	read answer
1364	if [[ "$answer" = l ]]
1365	then
1366	more ${remote_host}_last_make_protokoll
1367	fi
1368	done
1369	if [[ $answer = k ]]
1370	then
1371	locat=user_abort; exit
1372	fi
1373	fi
1374	fi
1375
1376
1377	# TAR NEW VERSION ON LOCAL HOST
1378	printf "\n *** tar update on local host ..."
1379	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1380
1381
1382	# COMPILE THE UTILITY PROGRAMS
1383	elif [[ $compile_utility_programs = true ]]
1384	then
1385	printf "\n\n"
1386	echo " *** compiling the utility programs ..."
1387	cd ${local_source_path}/../UTIL
1388
1389	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1390	touch *.f90
1391	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1392
1393	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1394	if [[ $util_compiled_localhost == false ]]
1395	then
1396	printf "\n\n"
1397	echo " *** compiling the mrun GUI"
1398	if which qmake >/dev/null; then
1399	cd mrungui
1400	touch *
1401	qmake
1402	make
1403	make clean
1404	rm Makefile
1405	cd ..
1406	else
1407	echo " +++ no qmake found. The (optional) GUI will not be compiled."
1408	fi
1409
1410	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
1411
1412	printf "\n\n"
1413	echo " *** compiling check_namelist_files ..."
1414
1415	check_depository_path=${local_source_path}/../UTIL
1416	cd $check_depository_path
1417	mkdir check_tmp
1418	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1419	cd check_tmp
1420	tar -xf ${mainprog}_sources_check.tar
1421	rm -rf ${mainprog}_sources_check.tar
1422
1423	copts_check="-cpp -D_parallel -D__check"
1424	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check"
1425
1426	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
1427	mv check_namelist_files.tar $check_depository_path
1428	mv check_namelist_files.x $PALM_BIN
1429	cd $check_depository_path
1430	rm -rf check_tmp
1431	util_compiled_localhost=true
1432	else
1433	cd $check_depository_path
1434	printf "\n\n"
1435	echo " *** skipped compilation of mrun GUI (already."
1436	printf "\n\n"
1437	echo " *** skipped compilation of check_namelist_files."
1438	fi
1439
1440	fi
1441	fi
1442	done
1443
1444
1445	if [[ $host_found = false ]]
1446	then
1447	if [[ $host = all ]]
1448	then
1449	printf "\n +++ no hosts found in configuration file"
1450	else
1451	printf "\n +++ host \"$host\" not found in configuration file"
1452	fi
1453	locat=config_file; exit
1454	fi
1455
1456
1457
1458	# FINAL WORK
1459	rm -f hosts_found_in_config_file
1460	rm -f ${local_source_path}/${mainprog}_sources_check.tar
1461

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |