Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 746

Last change on this file since 746 was 740, checked in by raasch, 13 years ago
HLRN access via hicegate0 (130.75.4.101)
Property svn:keywords set to `Id Rev`
File size: 48.4 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 740 2011-08-17 14:54:23Z letzel $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119	# 04/03/11 - BjornM- re-adjustments for lcxt4
120	# 06/03/11 - Siggi - adjustments for ibmkisti
121	# 03/04/11 - Micha - added lckordi
122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123
124
125
126	# VARIABLE DECLARATIONS + DEFAULT VALUES
127	compile_utility_programs=false
128	config_file=.mrun.config
129	fimm=false
130	host=all
131	host_found=false
132	locat=normal
133	makefile=""
134	module_calls=""
135	scirocco=false
136	silent=false
137	suf=f90
138	update=false
139	working_directory=`pwd`
140
141	typeset -i ih ihost=0
142
143	typeset -R30 calltime
144	typeset -L20 column1
145	typeset -L50 column2
146	typeset -L70 column3
147	typeset -L40 version="MBUILD 2.1 Rev$Rev: 740 $"
148
149	# ERROR HANDLING
150	# IN CASE OF EXIT:
151	trap 'rm -rf $working_directory/tmp_mbuild
152	if [[ $locat != normal ]]
153	then
154	printf "\n\n +++ mbuild killed \n\n"
155	else
156	printf "\n\n *** mbuild finished \n\n"
157	fi' exit
158
159
160	# IN CASE OF TERMINAL-BREAK:
161	trap 'rm -rf $working_directory/tmp_mbuild
162	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
163	exit
164	' 2
165
166
167	tmp_mbuild=${working_directory}/tmp_mbuild
168
169	# READ SHELLSCRIPT-OPTIONS
170	while getopts :c:h:m:s:u option
171	do
172	case $option in
173	(c) config_file=$OPTARG;;
174	(h) host=$OPTARG;;
175	(m) makefile=$OPTARG;;
176	(s) suf=$OPTARG;;
177	(u) compile_utility_programs=true;;
178	(\?) printf "\n +++ unknown option $OPTARG \n";
179	locat=parameter; exit;;
180	esac
181	done
182
183
184
185	# CHECK, IF CONFIGURATION-FILE EXISTS
186	if [[ ! -f $config_file ]]
187	then
188	printf "\n +++ configuration file: "
189	printf "\n $config_file"
190	printf "\n does not exist"
191	locat=configuration; exit
192	fi
193
194
195
196	# DETERMINE THE LOCAL HOST
197	local_host_real_name=$(hostname)
198	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
199
200
201
202	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
203	line=""
204	grep "%host_identifier" $config_file > $tmp_mbuild
205	while read line
206	do
207	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
208	then
209	HOSTNAME=`echo $line \| cut -d" " -s -f2`
210	host_identifier=`echo $line \| cut -d" " -s -f3`
211	if [[ $local_host_real_name = $HOSTNAME ]]
212	then
213	local_host=$host_identifier
214	break
215	fi
216	fi
217	done < $tmp_mbuild
218
219	if [[ "$local_host" = "" ]]
220	then
221	printf "\n +++ no host identifier found in configuration file \"$config_file\""
222	printf "\n for local host \"$local_host_real_name\"."
223	printf "\n Please add line"
224	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
225	printf "\n to the configuration file."
226	locat=local_host; exit
227	fi
228
229
230
231	[[ $local_host_real_name = scirocco ]] && scirocco=true
232	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
233
234
235
236	if [[ $local_host != ibms ]]
237	then
238	config_file=$PWD/$config_file
239	else
240	config_file=`pwd`/$config_file
241	fi
242
243
244
245	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
246	line=""
247	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
248	while read line
249	do
250	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
251	then
252	local_username=`echo $line \| cut -d" " -s -f2`
253	fi
254	done < $tmp_mbuild
255
256
257	if [[ "$local_username" = "" ]]
258	then
259	printf "\n +++ no user name found in configuration file"
260	printf "\n for local host \"$local_host\" "
261	locat=config_file; exit
262	fi
263
264
265	# DETERMINE LOCAL SOURCE-CODE PATH.
266	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
267	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
268	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
269	line=""
270	grep "%" $config_file > $tmp_mbuild
271	while read line
272	do
273	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
274	then
275	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
276	value=`echo $line \| cut -d" " -s -f2`
277	eval export $var=\$value
278	fi
279	done < $tmp_mbuild
280
281	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
282	line=""
283	grep "%source_path" $config_file > $tmp_mbuild
284	while read line
285	do
286	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
287	then
288	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
289	then
290	global_source_path=`echo $line \| cut -d" " -s -f2`
291	fi
292	fi
293	done < $tmp_mbuild
294
295	line=""
296	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
297	while read line
298	do
299	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
300	then
301	local_source_path=`echo $line \| cut -d" " -s -f2`
302	fi
303	done < $tmp_mbuild
304
305	if [[ "$local_source_path" = "" ]]
306	then
307	if [[ "$global_source_path" != "" ]]
308	then
309	local_source_path=$global_source_path
310	else
311	printf "\n +++ no source path found in configuration file"
312	printf "\n for local host \"$local_host\" "
313	printf "\n please set \"\%source_path\" in configuration file"
314	locat=config_file; exit
315	fi
316	fi
317	eval local_source_path=$local_source_path
318	eval local_source_path=$local_source_path
319
320
321
322	# DETERMINE GLOBAL DEPOSITORY-PATH
323	line=""
324	grep "%depository_path" $config_file > $tmp_mbuild
325	while read line
326	do
327	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
328	then
329	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
330	then
331	global_depository_path=`echo $line \| cut -d" " -s -f2`
332	fi
333	fi
334	done < $tmp_mbuild
335
336
337
338	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
339	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
340	then
341	printf "\n +++ no main program or more than one main program defined"
342	printf "\n in configuration file"
343	locat=configuration; exit
344	else
345	line=`grep "%mainprog" $config_file`
346	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
347	then
348	printf "\n +++ no main program defined in configuration file"
349	locat=configuration; exit
350	fi
351	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
352	fi
353
354
355
356	# CHECK IF MAKEFILE EXITS
357	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
358	if [[ ! -f $makefile ]]
359	then
360	printf "\n +++ makefile: "
361	printf "\n $makefile"
362	printf "\n does not exist"
363	locat=makefile; exit
364	fi
365
366
367	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
368	calltime=$(date)
369	printf "\n"
370	printf "#------------------------------------------------------------------------# \n"
371	printf "\| $version$calltime \| \n"
372	printf "\| \| \n"
373	column1="called on:"; column2=$local_host_real_name
374	printf "\| $column1$column2 \| \n"
375	column1="local username:"; column2=$local_username
376	printf "\| $column1$column2 \| \n"
377	column1="local IP-addres:"; column2=$local_addres
378	printf "\| $column1$column2 \| \n"
379	column1="config file:"; column2=$config_file
380	printf "\| $column1$column2 \| \n"
381	column1="makefile:"; column2=$makefile
382	printf "\| $column1$column2 \| \n"
383	column1="local source path:"; column2=$local_source_path
384	printf "\| $column1$column2 \| \n"
385	printf "#------------------------------------------------------------------------# \n"
386
387	# printf "\| \| \n"
388
389
390	if [[ $compile_utility_programs = false ]]
391	then
392
393	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
394	# WITH OVERWRITING FILES ON THE REMOTE HOST
395	cd $local_source_path
396	printf "\n\n *** tar of makefile and source files in $local_source_path"
397	tar -cf ${mainprog}_sources.tar Makefile *.$suf
398	printf "\n"
399
400	fi
401
402
403
404	# GET CONFIRMATION TO CONTINUE
405	if [[ $host = all ]]
406	then
407	printf "\n *** updates will be made for ALL hosts found in"
408	printf "\n the configuration file"
409	else
410	printf "\n *** update will be made for host \"$host\" "
411	fi
412
413	if [[ $silent = false ]]
414	then
415	answer=dummy
416	printf "\n\n"
417	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
418	do
419	printf " >>> continue (y/n) ? "
420	read answer
421	done
422	if [[ $answer = n \|\| $answer = N ]]
423	then
424	locat=user_abort; exit
425	fi
426	fi
427
428
429
430
431	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
432	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
433	printf "\n *** scanning configuration file for host(s) ..."
434
435	grep %fopts $config_file > $tmp_mbuild
436	while read line
437	do
438	# KOMMENTARZEILEN UEBERSPRINGEN
439	[[ $(echo $line \| cut -c1) = "#" ]] && continue
440	(( ihost = ihost + 1 ))
441	hostline[$ihost]="$line"
442	done < $tmp_mbuild
443
444
445	while (( ih < ihost ))
446	do
447
448	(( ih = ih + 1 ))
449
450	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
451	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
452	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
453	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
454	remote_host=`echo $remote_host_string \| cut -d" " -f1`
455	if [[ $host != all ]]
456	then
457	[[ $remote_host != $host ]] && continue
458	fi
459	host_found=true
460	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
461	if [[ $condition1 = $remote_host ]]
462	then
463	condition1=""
464	else
465	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
466	fi
467
468	modules=""
469	netcdf_inc=""
470	netcdf_lib=""
471
472	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
473	case $remote_host in
474	(lckordi) remote_adress=210.219.61.8;;
475	(lcmuk) remote_addres=130.75.105.2;;
476	(lcrte) remote_addres=133.5.185.60;;
477	(lcsgib) remote_addres=130.73.232.102;;
478	(lcsgih) remote_addres=130.75.4.101;;
479	(lck) remote_addres=165.132.26.61;;
480	(lctit) remote_addres=10.1.6.170;;
481	(lcxt4) remote_addres=129.177.20.113;;
482	(lcxt5m) remote_addres=193.166.211.144;;
483	(decalpha) remote_addres=165.132.26.56;;
484	(ibmh) remote_addres=136.172.40.15;;
485	(ibmkisti) remote_addres=150.183.146.24;;
486	(ibmku) remote_addres=133.5.4.129;;
487	(ibms) remote_addres=150.183.5.101;;
488	(ibmy) remote_addres=165.132.26.58;;
489	(nech) remote_addres=136.172.44.192;;
490	(neck) remote_addres=133.5.178.11;;
491	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
492	(*) if [[ $local_host != $remote_host ]]
493	then
494	printf "\n +++ remote host \"$remote_host\" unknown";
495	printf "\n please inform PALM group support!"
496	fi;;
497	esac
498
499
500	# REMOTE-USERNAMEN ERMITTELN
501	line=""
502	found=false
503	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
504	while read line1
505	do
506
507	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
508	then
509	line="$line1"
510	fi
511
512	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
513	then
514	remote_username=`echo $line \| cut -d" " -s -f2`
515	found=true
516	fi
517
518	done < $tmp_mbuild
519
520	if [[ $found = false ]]
521	then
522	printf "\n +++ no remote username found in configuration file"
523	printf "\n for \"$remote_host_string\" "
524	locat=config_file; exit
525	fi
526
527
528	# REMOTE-QUELLTEXTPFAD ERMITTELN
529	line=""
530	remote_source_path=""
531	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
532	while read line1
533	do
534
535	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
536	then
537	line="$line1"
538	fi
539
540	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
541	then
542	remote_source_path=`echo $line \| cut -d" " -s -f2`
543	fi
544
545	done < $tmp_mbuild
546
547	if [[ "$remote_source_path" = "" ]]
548	then
549	if [[ "$global_source_path" != "" ]]
550	then
551	remote_source_path=$global_source_path
552	else
553	printf "\n +++ no source path found in configuration file"
554	printf "\n for \"$remote_host_string\" "
555	locat=config_file; exit
556	fi
557	fi
558
559	remote_ud=${remote_source_path}/../UTIL
560	remote_ud=$(eval echo $remote_ud)
561
562
563	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
564	remote_md=""
565	line=""
566	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
567	while read line1
568	do
569
570	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
571	then
572	line="$line1"
573	fi
574
575	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
576	then
577	remote_md=`echo $line \| cut -d" " -s -f2`
578	fi
579
580	done < $tmp_mbuild
581
582	if [[ "$remote_md" = "" ]]
583	then
584	if [[ "$global_depository_path" != "" ]]
585	then
586	remote_md=$global_depository_path
587	else
588	printf "\n +++ no depository path found in configuration file"
589	printf "\n for \"$remote_host_string\" "
590	printf "\n please set \"\%depository_path\" in configuration file"
591	locat=config_file; exit
592	fi
593	fi
594
595	remote_md=$(eval echo $remote_md)
596	block=""
597	[[ "$condition1" != "" ]] && block=_$condition1
598	[[ "$condition2" != "" ]] && block=${block}_$condition2
599	remote_md=${remote_md}$block
600
601
602	# COMPILERNAMEN ERMITTELN
603	line=""
604	found=false
605	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
606	while read line1
607	do
608
609	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
610	then
611	line="$line1"
612	fi
613
614	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
615	then
616	compiler_name=`echo $line \| cut -d" " -s -f2`
617	found=true
618	fi
619
620	done < $tmp_mbuild
621
622	if [[ $found = false ]]
623	then
624	printf "\n +++ no compiler name found in configuration file"
625	printf "\n for \"$remote_host_string\" "
626	locat=config_file; exit
627	fi
628
629
630	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
631	# SERIELLER COMPILERNAME ERMITTELT WERDEN
632	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
633	then
634	line=""
635	found=false
636	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
637	while read line1
638	do
639
640	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
641	then
642	line="$line1"
643	fi
644
645	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
646	then
647	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
648	found=true
649	fi
650
651	done < $tmp_mbuild
652
653	if [[ $found = false ]]
654	then
655	printf "\n +++ no serial compiler name found in configuration file"
656	printf "\n for \"$remote_host_string\" "
657	locat=config_file; exit
658	fi
659	else
660	compiler_name_ser=$compiler_name
661	fi
662
663
664
665	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
666	line=""
667	found=false
668	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
669	while read line1
670	do
671
672	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
673	then
674	line="$line1"
675	fi
676
677	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
678	then
679	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
680	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
681	found=true
682	fi
683
684	done < $tmp_mbuild
685
686	if [[ $found = false ]]
687	then
688	printf "\n +++ no preprocessor options found in configuration file"
689	printf "\n for \"$remote_host_string\" "
690	locat=config_file; exit
691	fi
692
693
694	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
695	for string in $remote_host_string
696	do
697	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
698	then
699	cpp_options="$cpp_options -D__lc "
700	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
701	then
702	cpp_options="${cpp_options},-D__ibm"
703	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
704	then
705	cpp_options="${cpp_options} -D__nec"
706	else
707	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
708	then
709	cpp_options="${cpp_options},-D__$string"
710	else
711	cpp_options="$cpp_options -D__$string "
712	fi
713	fi
714	done
715
716
717
718	# NETCDF-OPTIONEN ERMITTELN
719	line=""
720	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
721	while read line1
722	do
723
724	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
725	then
726	line="$line1"
727	fi
728
729	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
730	then
731	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
732	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
733	fi
734
735	done < $tmp_mbuild
736
737	line=""
738	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
739	while read line1
740	do
741
742	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
743	then
744	line="$line1"
745	fi
746
747	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
748	then
749	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
750	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
751	fi
752
753	done < $tmp_mbuild
754
755
756
757	# get make options
758	line=""
759	found=false
760	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
761	while read line1
762	do
763
764	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
765	then
766	line="$line1"
767	fi
768
769	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
770	then
771	# remove colons from directive string
772	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
773
774	fi
775
776	done < $tmp_mbuild
777
778
779
780	# COMPILEROPTIONEN ERMITTELN
781	line=""
782	found=false
783	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
784	while read line1
785	do
786
787	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
788	then
789	line="$line1"
790	fi
791
792	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
793	then
794	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
795	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
796	found=true
797
798	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
799	compiler_options="$compiler_options $netcdf_inc"
800	fi
801
802	done < $tmp_mbuild
803
804	if [[ $found = false ]]
805	then
806	printf "\n +++ no compiler options found in configuration file"
807	printf "\n for \"$remote_host_string\" "
808	locat=config_file; exit
809	fi
810
811
812
813	# get modules to be loaded
814	line=""
815	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
816	while read line1
817	do
818
819	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
820	then
821	line="$line1"
822	fi
823
824	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
825	then
826	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
827	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
828	fi
829
830	done < $tmp_mbuild
831
832
833
834
835	# LADER-OPTIONEN ERMITTELN
836	line=""
837	found=false
838	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
839	while read line1
840	do
841
842	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
843	then
844	line="$line1"
845	fi
846
847	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
848	then
849	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
850	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
851	found=true
852
853	# NETCDF-LIBRARY HINZUFUEGEN
854	loader_options="$loader_options $netcdf_lib"
855	fi
856
857	done < $tmp_mbuild
858
859	if [[ $found = false ]]
860	then
861	printf "\n +++ no loader options found in configuration file"
862	printf "\n for \"$remote_host_string\" "
863	locat=config_file; exit
864	fi
865
866
867	printf "\n\n#------------------------------------------------------------------------# \n"
868	if [[ $remote_host = $local_host ]]
869	then
870	column1="remote_host:"; column2="$remote_host (= local host!)"
871	else
872	column1="remote_host:"; column2=$remote_host
873	fi
874	printf "\| $column1$column2 \| \n"
875	printf "\| \| \n"
876	column1="conditions:"; column2="$condition1 $condition2"
877	printf "\| $column1$column2 \| \n"
878	column1="make depository:"; column2=$remote_md
879	printf "\| $column1$column2 \| \n"
880	line=$(echo "$remote_md" \| cut -c51-)
881	while [[ "$line" != "" ]]
882	do
883	column1=""
884	column2=$line
885	printf "\| $column1$column2 \| \n"
886	line=$(echo "$line" \| cut -c51-)
887	done
888	if [[ $compile_utility_programs = true ]]
889	then
890	column1="utility directory:"; column2=$remote_ud
891	printf "\| $column1$column2 \| \n"
892	fi
893	column1="username:"; column2=$remote_username
894	printf "\| $column1$column2 \| \n"
895	column1="addres:"; column2=$remote_addres
896	printf "\| $column1$column2 \| \n"
897	column1="compiler:"; column2=$compiler_name
898	printf "\| $column1$column2 \| \n"
899	if [[ $compile_utility_programs = true ]]
900	then
901	column1="serial compiler:"; column2=$compiler_name_ser
902	printf "\| $column1$column2 \| \n"
903	fi
904	if [[ "$make_options" != "" ]]
905	then
906	column1="make options:"; column2=$make_options
907	printf "\| $column1$column2 \| \n"
908	fi
909	column1="cpp options:"; column2=$cpp_options
910	printf "\| $column1$column2 \| \n"
911	line=$(echo "$cpp_options" \| cut -c51-)
912	while [[ "$line" != "" ]]
913	do
914	column1=""
915	column2=$line
916	printf "\| $column1$column2 \| \n"
917	line=$(echo "$line" \| cut -c51-)
918	done
919	column1="compiler options:"; column2=$compiler_options
920	printf "\| $column1$column2 \| \n"
921	line=$(echo "$compiler_options" \| cut -c51-)
922	while [[ "$line" != "" ]]
923	do
924	column1=""
925	column2=$line
926	printf "\| $column1$column2 \| \n"
927	line=$(echo "$line" \| cut -c51-)
928	done
929	column1="loader options:"; column2=$loader_options
930	printf "\| $column1$column2 \| \n"
931	line=$(echo "$loader_options" \| cut -c51-)
932	while [[ "$line" != "" ]]
933	do
934	column1=""
935	column2=$line
936	printf "\| $column1$column2 \| \n"
937	line=$(echo "$line" \| cut -c51-)
938	done
939	if [[ $modules != "" ]]
940	then
941	column1="modules to be load:"; column2=$modules
942	printf "\| $column1$column2 \| \n"
943	line=$(echo "$modules" \| cut -c51-)
944	while [[ "$line" != "" ]]
945	do
946	column1=""
947	column2=$line
948	printf "\| $column1$column2 \| \n"
949	line=$(echo "$line" \| cut -c51-)
950	done
951	fi
952	printf "#------------------------------------------------------------------------# \n"
953
954	if [[ $silent = false ]]
955	then
956	answer=dummy
957	printf "\n\n"
958	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
959	do
960	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
961	read answer
962	done
963	if [[ $answer = a \|\| $answer = A ]]
964	then
965	locat=user_abort; exit
966	fi
967	if [[ $answer = c \|\| $answer = C ]]
968	then
969	silent=true
970	fi
971	if [[ $answer = s \|\| $answer = S ]]
972	then
973	continue
974	fi
975	fi
976
977
978	# make on remote host
979	if [[ $remote_host != $local_host ]]
980	then
981
982	if [[ $compile_utility_programs = false ]]
983	then
984
985	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
986	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
987	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
988	if [[ $remote_host != lctit ]]
989	then
990	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
991	else
992	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
993	# MIT SSH, DESHALB AUFRUF PER PIPE
994	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
995	fi
996	if [[ $local_host = decalpha ]]
997	then
998	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
999	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1000	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1001	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1002	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1003	else
1004	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1005	fi
1006
1007
1008
1009	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1010	echo " *** untar previous update on remote host, if existing"
1011	if [[ $remote_host != lctit ]]
1012	then
1013	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1014	else
1015	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1016	# MIT SSH, DESHALB AUFRUF PER PIPE
1017	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1018	fi
1019
1020
1021	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1022	echo " *** untar actual sources on remote host"
1023	if [[ $remote_host != lctit ]]
1024	then
1025	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1026	else
1027	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1028	# MIT SSH, DESHALB AUFRUF PER PIPE
1029	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1030	fi
1031
1032
1033	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1034	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1035	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1036	# Z.B. DIE PFADE ZUM COMPILER)
1037	echo " *** execute \"make\" on remote host"
1038
1039
1040	# generate make call with make options
1041	if [[ $remote_host = nech ]]
1042	then
1043	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1044	else
1045	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1046	fi
1047
1048	# generate command to load modules, if modules are given
1049	if [[ "$modules" != "" ]]
1050	then
1051	if [[ $remote_host = lctit ]]
1052	then
1053	module_calls=". $modules"
1054	else
1055	module_calls="module load ${modules};"
1056	fi
1057
1058	# bugfix for wrong netcdf module
1059	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1060	then
1061	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1062	then
1063	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1064	fi
1065	fi
1066	else
1067	module_calls=""
1068	fi
1069
1070	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1071	then
1072
1073	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1074
1075	elif [[ $remote_host = ibmh ]]
1076	then
1077
1078	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1079
1080	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1081	then
1082
1083	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1084	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1085
1086	elif [[ $remote_host = lctit ]]
1087	then
1088
1089	echo " " > ${remote_host}_last_make_protokoll
1090	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1091	do
1092	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1093	done
1094
1095	elif [[ $remote_host = lcxt4 ]]
1096	then
1097
1098	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1099
1100	else
1101
1102	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1103
1104	fi
1105
1106	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1107	then
1108	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1109	if [[ $silent = false ]]
1110	then
1111	answer=dummy
1112	printf "\n"
1113	while [[ "$answer" != c && "$answer" != k ]]
1114	do
1115	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1116	read answer
1117	if [[ "$answer" = l ]]
1118	then
1119	more ${remote_host}_last_make_protokoll
1120	fi
1121	done
1122	if [[ $answer = k ]]
1123	then
1124	locat=user_abort; exit
1125	fi
1126	fi
1127	fi
1128
1129
1130
1131	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1132	printf "\n *** tar update on remote host ..."
1133	if [[ $remote_host != lctit ]]
1134	then
1135	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1136	else
1137	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1138	# MIT SSH, DESHALB AUFRUF PER PIPE
1139	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1140	fi
1141
1142
1143	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1144	# printf "\n *** \"make clean\" on remote host ..."
1145	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1146	# printf "\n"
1147
1148
1149
1150
1151	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1152	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1153	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1154	elif [[ $compile_utility_programs = true ]]
1155	then
1156
1157	printf "\n\n"
1158	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1159	cd ${local_source_path}/../SCRIPTS
1160
1161	if [[ $remote_host != lctit ]]
1162	then
1163	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1164	else
1165	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1166	# MIT SSH, DESHALB AUFRUF PER PIPE
1167	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1168	fi
1169
1170	# KOPIEREN DER SCRIPTE
1171	if [[ $local_host = decalpha ]]
1172	then
1173	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1174	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1175	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1176	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1177	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1178	else
1179	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1180	fi
1181
1182	cd - > /dev/null
1183	cd ${local_source_path}/../UTIL
1184
1185
1186	# KOPIEREN DER UTILITY-PROGRAMME
1187	if [[ $local_host = decalpha ]]
1188	then
1189	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1190	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1191	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1192	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1193	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1194	else
1195	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1196	fi
1197
1198
1199
1200	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1201	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1202	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1203	# Z.B. DIE PFADE ZUM COMPILER)
1204	echo " *** execute \"make\" on remote host"
1205
1206	if [[ $remote_host = nech ]]
1207	then
1208	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1209	else
1210	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1211	fi
1212
1213	# generate command to load modules, if modules are given
1214	if [[ "$modules" != "" ]]
1215	then
1216	if [[ $remote_host = lctit ]]
1217	then
1218	module_calls=". $modules"
1219	else
1220	module_calls="module load ${modules};"
1221	fi
1222
1223	# bugfix for wrong netcdf module
1224	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1225	then
1226	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1227	then
1228	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1229	fi
1230	fi
1231	else
1232	module_calls=""
1233	fi
1234
1235	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1236	then
1237
1238	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1239
1240	elif [[ $remote_host = ibmh ]]
1241	then
1242
1243	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1244
1245	elif [[ $remote_host = lctit ]]
1246	then
1247
1248	echo " " > ${remote_host}_last_make_protokoll
1249	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1250	do
1251	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1252	done
1253
1254	elif [[ $remote_host = lcxt4 ]]
1255	then
1256
1257	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1258
1259	else
1260
1261	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1262
1263	fi
1264
1265	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1266
1267	rm -rf ${remote_host}_last_make_protokoll
1268
1269	# make on local host
1270	else
1271
1272	# workaround for lcxt4
1273	if [[ $remote_host = lcxt4 ]]
1274	then
1275	. /opt/modules/default/init/ksh
1276	fi
1277
1278	# first load modules, if given
1279	if [[ "$modules" != "" ]]
1280	then
1281	if [[ $remote_host = lctit ]]
1282	then
1283	. $modules
1284	else
1285	module load ${modules}
1286	fi
1287	fi
1288
1289
1290	if [[ $compile_utility_programs = false ]]
1291	then
1292
1293	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1294	eval remote_md=$remote_md
1295	if [[ ! -d $remote_md ]]
1296	then
1297	if mkdir $remote_md
1298	then
1299	printf "\n\n *** directory for make depository:"
1300	printf "\n $remote_md"
1301	printf "\n was created\n"
1302	else
1303	printf "\n +++ directory for make depository:"
1304	printf "\n $remote_md"
1305	printf "\n cannot be created"
1306	locat=local_depository_path; exit
1307	fi
1308	fi
1309
1310	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1311	echo " "
1312	echo " *** updating sources in $remote_md"
1313	cd $remote_md
1314	cp $local_source_path/${mainprog}_sources.tar .
1315	tar xf ${mainprog}_sources.tar
1316
1317	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1318	echo " "
1319	echo " *** execute \"make\" on local host"
1320
1321	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1322
1323	if [[ $? != 0 ]]
1324	then
1325	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1326	if [[ $silent = false ]]
1327	then
1328	answer=dummy
1329	printf "\n"
1330	while [[ "$answer" != c && "$answer" != k ]]
1331	do
1332	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1333	read answer
1334	if [[ "$answer" = l ]]
1335	then
1336	more ${remote_host}_last_make_protokoll
1337	fi
1338	done
1339	if [[ $answer = k ]]
1340	then
1341	locat=user_abort; exit
1342	fi
1343	fi
1344	fi
1345
1346
1347	# TAR NEW VERSION ON LOCAL HOST
1348	printf "\n *** tar update on local host ..."
1349	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1350
1351
1352	# COMPILE THE UTILITY PROGRAMS
1353	elif [[ $compile_utility_programs = true ]]
1354	then
1355	printf "\n\n"
1356	echo " *** compiling the utility programs ..."
1357	cd ${local_source_path}/../UTIL
1358
1359	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1360	touch *.f90
1361	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1362	cd - > /dev/null
1363	fi
1364
1365	fi
1366
1367	done
1368
1369
1370	if [[ $host_found = false ]]
1371	then
1372	if [[ $host = all ]]
1373	then
1374	printf "\n +++ no hosts found in configuration file"
1375	else
1376	printf "\n +++ host \"$host\" not found in configuration file"
1377	fi
1378	locat=config_file; exit
1379	fi
1380
1381
1382
1383	# FINAL WORK
1384	rm -f hosts_found_in_config_file
1385

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |