Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 674

Last change on this file since 674 was 635, checked in by raasch, 14 years ago
mrun/mbuild/subjob adjustments for new Tsubama system at Tokyo Institute of Techology (lctit)
Property svn:keywords set to `Id Rev`
File size: 47.7 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 635 2010-12-14 13:33:02Z suehring $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119
120
121
122	# VARIABLE DECLARATIONS + DEFAULT VALUES
123	compile_utility_programs=false
124	config_file=.mrun.config
125	fimm=false
126	host=all
127	host_found=false
128	locat=normal
129	makefile=""
130	module_calls=""
131	scirocco=false
132	silent=false
133	suf=f90
134	update=false
135	working_directory=`pwd`
136
137	typeset -i ih ihost=0
138
139	typeset -R30 calltime
140	typeset -L20 column1
141	typeset -L50 column2
142	typeset -L70 column3
143	typeset -L40 version="MBUILD 2.1 Rev$Rev: 635 $"
144
145	# ERROR HANDLING
146	# IN CASE OF EXIT:
147	trap 'rm -rf $working_directory/tmp_mbuild
148	if [[ $locat != normal ]]
149	then
150	printf "\n\n +++ mbuild killed \n\n"
151	else
152	printf "\n\n *** mbuild finished \n\n"
153	fi' exit
154
155
156	# IN CASE OF TERMINAL-BREAK:
157	trap 'rm -rf $working_directory/tmp_mbuild
158	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
159	exit
160	' 2
161
162
163	tmp_mbuild=${working_directory}/tmp_mbuild
164
165	# READ SHELLSCRIPT-OPTIONS
166	while getopts :c:h:m:s:u option
167	do
168	case $option in
169	(c) config_file=$OPTARG;;
170	(h) host=$OPTARG;;
171	(m) makefile=$OPTARG;;
172	(s) suf=$OPTARG;;
173	(u) compile_utility_programs=true;;
174	(\?) printf "\n +++ unknown option $OPTARG \n";
175	locat=parameter; exit;;
176	esac
177	done
178
179
180
181	# CHECK, IF CONFIGURATION-FILE EXISTS
182	if [[ ! -f $config_file ]]
183	then
184	printf "\n +++ configuration file: "
185	printf "\n $config_file"
186	printf "\n does not exist"
187	locat=configuration; exit
188	fi
189
190
191
192	# DETERMINE THE LOCAL HOST
193	local_host_real_name=$(hostname)
194	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
195
196
197
198	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
199	line=""
200	grep "%host_identifier" $config_file > $tmp_mbuild
201	while read line
202	do
203	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
204	then
205	HOSTNAME=`echo $line \| cut -d" " -s -f2`
206	host_identifier=`echo $line \| cut -d" " -s -f3`
207	if [[ $local_host_real_name = $HOSTNAME ]]
208	then
209	local_host=$host_identifier
210	break
211	fi
212	fi
213	done < $tmp_mbuild
214
215	if [[ "$local_host" = "" ]]
216	then
217	printf "\n +++ no host identifier found in configuration file \"$config_file\""
218	printf "\n for local host \"$local_host_real_name\"."
219	printf "\n Please add line"
220	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
221	printf "\n to the configuration file."
222	locat=local_host; exit
223	fi
224
225
226
227	[[ $local_host_real_name = scirocco ]] && scirocco=true
228	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
229
230
231
232	if [[ $local_host != ibms ]]
233	then
234	config_file=$PWD/$config_file
235	else
236	config_file=`pwd`/$config_file
237	fi
238
239
240
241	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
242	line=""
243	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
244	while read line
245	do
246	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
247	then
248	local_username=`echo $line \| cut -d" " -s -f2`
249	fi
250	done < $tmp_mbuild
251
252
253	if [[ "$local_username" = "" ]]
254	then
255	printf "\n +++ no user name found in configuration file"
256	printf "\n for local host \"$local_host\" "
257	locat=config_file; exit
258	fi
259
260
261	# DETERMINE LOCAL SOURCE-CODE PATH.
262	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
263	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
264	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
265	line=""
266	grep "%" $config_file > $tmp_mbuild
267	while read line
268	do
269	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
270	then
271	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
272	value=`echo $line \| cut -d" " -s -f2`
273	eval export $var=\$value
274	fi
275	done < $tmp_mbuild
276
277	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
278	line=""
279	grep "%source_path" $config_file > $tmp_mbuild
280	while read line
281	do
282	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
283	then
284	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
285	then
286	global_source_path=`echo $line \| cut -d" " -s -f2`
287	fi
288	fi
289	done < $tmp_mbuild
290
291	line=""
292	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
293	while read line
294	do
295	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
296	then
297	local_source_path=`echo $line \| cut -d" " -s -f2`
298	fi
299	done < $tmp_mbuild
300
301	if [[ "$local_source_path" = "" ]]
302	then
303	if [[ "$global_source_path" != "" ]]
304	then
305	local_source_path=$global_source_path
306	else
307	printf "\n +++ no source path found in configuration file"
308	printf "\n for local host \"$local_host\" "
309	printf "\n please set \"\%source_path\" in configuration file"
310	locat=config_file; exit
311	fi
312	fi
313	eval local_source_path=$local_source_path
314	eval local_source_path=$local_source_path
315
316
317
318	# DETERMINE GLOBAL DEPOSITORY-PATH
319	line=""
320	grep "%depository_path" $config_file > $tmp_mbuild
321	while read line
322	do
323	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
324	then
325	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
326	then
327	global_depository_path=`echo $line \| cut -d" " -s -f2`
328	fi
329	fi
330	done < $tmp_mbuild
331
332
333
334	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
335	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
336	then
337	printf "\n +++ no main program or more than one main program defined"
338	printf "\n in configuration file"
339	locat=configuration; exit
340	else
341	line=`grep "%mainprog" $config_file`
342	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
343	then
344	printf "\n +++ no main program defined in configuration file"
345	locat=configuration; exit
346	fi
347	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
348	fi
349
350
351
352	# CHECK IF MAKEFILE EXITS
353	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
354	if [[ ! -f $makefile ]]
355	then
356	printf "\n +++ makefile: "
357	printf "\n $makefile"
358	printf "\n does not exist"
359	locat=makefile; exit
360	fi
361
362
363	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
364	calltime=$(date)
365	printf "\n"
366	printf "#------------------------------------------------------------------------# \n"
367	printf "\| $version$calltime \| \n"
368	printf "\| \| \n"
369	column1="called on:"; column2=$local_host_real_name
370	printf "\| $column1$column2 \| \n"
371	column1="local username:"; column2=$local_username
372	printf "\| $column1$column2 \| \n"
373	column1="local IP-addres:"; column2=$local_addres
374	printf "\| $column1$column2 \| \n"
375	column1="config file:"; column2=$config_file
376	printf "\| $column1$column2 \| \n"
377	column1="makefile:"; column2=$makefile
378	printf "\| $column1$column2 \| \n"
379	column1="local source path:"; column2=$local_source_path
380	printf "\| $column1$column2 \| \n"
381	printf "#------------------------------------------------------------------------# \n"
382
383	# printf "\| \| \n"
384
385
386	if [[ $compile_utility_programs = false ]]
387	then
388
389	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
390	# WITH OVERWRITING FILES ON THE REMOTE HOST
391	cd $local_source_path
392	printf "\n\n *** tar of makefile and source files in $local_source_path"
393	tar -cf ${mainprog}_sources.tar Makefile *.$suf
394	printf "\n"
395
396	fi
397
398
399
400	# GET CONFIRMATION TO CONTINUE
401	if [[ $host = all ]]
402	then
403	printf "\n *** updates will be made for ALL hosts found in"
404	printf "\n the configuration file"
405	else
406	printf "\n *** update will be made for host \"$host\" "
407	fi
408
409	if [[ $silent = false ]]
410	then
411	answer=dummy
412	printf "\n\n"
413	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
414	do
415	printf " >>> continue (y/n) ? "
416	read answer
417	done
418	if [[ $answer = n \|\| $answer = N ]]
419	then
420	locat=user_abort; exit
421	fi
422	fi
423
424
425
426
427	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
428	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
429	printf "\n *** scanning configuration file for host(s) ..."
430
431	grep %fopts $config_file > $tmp_mbuild
432	while read line
433	do
434	# KOMMENTARZEILEN UEBERSPRINGEN
435	[[ $(echo $line \| cut -c1) = "#" ]] && continue
436	(( ihost = ihost + 1 ))
437	hostline[$ihost]="$line"
438	done < $tmp_mbuild
439
440
441	while (( ih < ihost ))
442	do
443
444	(( ih = ih + 1 ))
445
446	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
447	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
448	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
449	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
450	remote_host=`echo $remote_host_string \| cut -d" " -f1`
451	if [[ $host != all ]]
452	then
453	[[ $remote_host != $host ]] && continue
454	fi
455	host_found=true
456	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
457	if [[ $condition1 = $remote_host ]]
458	then
459	condition1=""
460	else
461	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
462	fi
463
464	modules=""
465	netcdf_inc=""
466	netcdf_lib=""
467
468	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
469	case $remote_host in
470	(lcmuk) remote_addres=130.75.105.2;;
471	(lcrte) remote_addres=133.5.185.60;;
472	(lcsgib) remote_addres=130.73.232.102;;
473	(lcsgih) remote_addres=130.75.4.102;;
474	(lck) remote_addres=165.132.26.61;;
475	(lctit) remote_addres=10.1.6.170;;
476	(lcxt4) remote_addres=129.177.20.113;;
477	(lcxt5m) remote_addres=193.166.211.144;;
478	(decalpha) remote_addres=165.132.26.56;;
479	(ibmh) remote_addres=136.172.40.15;;
480	(ibmku) remote_addres=133.5.4.129;;
481	(ibms) remote_addres=150.183.5.101;;
482	(ibmy) remote_addres=165.132.26.58;;
483	(nech) remote_addres=136.172.44.192;;
484	(neck) remote_addres=133.5.178.11;;
485	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
486	(*) if [[ $local_host != $remote_host ]]
487	then
488	printf "\n +++ remote host \"$remote_host\" unknown";
489	printf "\n please inform PALM group support!"
490	fi;;
491	esac
492
493
494	# REMOTE-USERNAMEN ERMITTELN
495	line=""
496	found=false
497	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
498	while read line1
499	do
500
501	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
502	then
503	line="$line1"
504	fi
505
506	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
507	then
508	remote_username=`echo $line \| cut -d" " -s -f2`
509	found=true
510	fi
511
512	done < $tmp_mbuild
513
514	if [[ $found = false ]]
515	then
516	printf "\n +++ no remote username found in configuration file"
517	printf "\n for \"$remote_host_string\" "
518	locat=config_file; exit
519	fi
520
521
522	# REMOTE-QUELLTEXTPFAD ERMITTELN
523	line=""
524	remote_source_path=""
525	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
526	while read line1
527	do
528
529	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
530	then
531	line="$line1"
532	fi
533
534	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
535	then
536	remote_source_path=`echo $line \| cut -d" " -s -f2`
537	fi
538
539	done < $tmp_mbuild
540
541	if [[ "$remote_source_path" = "" ]]
542	then
543	if [[ "$global_source_path" != "" ]]
544	then
545	remote_source_path=$global_source_path
546	else
547	printf "\n +++ no source path found in configuration file"
548	printf "\n for \"$remote_host_string\" "
549	locat=config_file; exit
550	fi
551	fi
552
553	remote_ud=${remote_source_path}/../UTIL
554	remote_ud=$(eval echo $remote_ud)
555
556
557	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
558	remote_md=""
559	line=""
560	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
561	while read line1
562	do
563
564	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
565	then
566	line="$line1"
567	fi
568
569	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
570	then
571	remote_md=`echo $line \| cut -d" " -s -f2`
572	fi
573
574	done < $tmp_mbuild
575
576	if [[ "$remote_md" = "" ]]
577	then
578	if [[ "$global_depository_path" != "" ]]
579	then
580	remote_md=$global_depository_path
581	else
582	printf "\n +++ no depository path found in configuration file"
583	printf "\n for \"$remote_host_string\" "
584	printf "\n please set \"\%depository_path\" in configuration file"
585	locat=config_file; exit
586	fi
587	fi
588
589	remote_md=$(eval echo $remote_md)
590	block=""
591	[[ "$condition1" != "" ]] && block=_$condition1
592	[[ "$condition2" != "" ]] && block=${block}_$condition2
593	remote_md=${remote_md}$block
594
595
596	# COMPILERNAMEN ERMITTELN
597	line=""
598	found=false
599	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
600	while read line1
601	do
602
603	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
604	then
605	line="$line1"
606	fi
607
608	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
609	then
610	compiler_name=`echo $line \| cut -d" " -s -f2`
611	found=true
612	fi
613
614	done < $tmp_mbuild
615
616	if [[ $found = false ]]
617	then
618	printf "\n +++ no compiler name found in configuration file"
619	printf "\n for \"$remote_host_string\" "
620	locat=config_file; exit
621	fi
622
623
624	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
625	# SERIELLER COMPILERNAME ERMITTELT WERDEN
626	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
627	then
628	line=""
629	found=false
630	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
631	while read line1
632	do
633
634	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
635	then
636	line="$line1"
637	fi
638
639	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
640	then
641	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
642	found=true
643	fi
644
645	done < $tmp_mbuild
646
647	if [[ $found = false ]]
648	then
649	printf "\n +++ no serial compiler name found in configuration file"
650	printf "\n for \"$remote_host_string\" "
651	locat=config_file; exit
652	fi
653	else
654	compiler_name_ser=$compiler_name
655	fi
656
657
658
659	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
660	line=""
661	found=false
662	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
663	while read line1
664	do
665
666	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
667	then
668	line="$line1"
669	fi
670
671	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
672	then
673	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
674	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
675	found=true
676	fi
677
678	done < $tmp_mbuild
679
680	if [[ $found = false ]]
681	then
682	printf "\n +++ no preprocessor options found in configuration file"
683	printf "\n for \"$remote_host_string\" "
684	locat=config_file; exit
685	fi
686
687
688	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
689	for string in $remote_host_string
690	do
691	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
692	then
693	cpp_options="$cpp_options -D__lc "
694	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
695	then
696	cpp_options="${cpp_options},-D__ibm"
697	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
698	then
699	cpp_options="${cpp_options} -D__nec"
700	else
701	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
702	then
703	cpp_options="${cpp_options},-D__$string"
704	else
705	cpp_options="$cpp_options -D__$string "
706	fi
707	fi
708	done
709
710
711
712	# NETCDF-OPTIONEN ERMITTELN
713	line=""
714	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
715	while read line1
716	do
717
718	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
719	then
720	line="$line1"
721	fi
722
723	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
724	then
725	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
726	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
727	fi
728
729	done < $tmp_mbuild
730
731	line=""
732	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
733	while read line1
734	do
735
736	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
737	then
738	line="$line1"
739	fi
740
741	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
742	then
743	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
744	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
745	fi
746
747	done < $tmp_mbuild
748
749
750
751	# get make options
752	line=""
753	found=false
754	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
755	while read line1
756	do
757
758	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
759	then
760	line="$line1"
761	fi
762
763	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
764	then
765	# remove colons from directive string
766	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
767
768	fi
769
770	done < $tmp_mbuild
771
772
773
774	# COMPILEROPTIONEN ERMITTELN
775	line=""
776	found=false
777	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
778	while read line1
779	do
780
781	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
782	then
783	line="$line1"
784	fi
785
786	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
787	then
788	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
789	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
790	found=true
791
792	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
793	compiler_options="$compiler_options $netcdf_inc"
794	fi
795
796	done < $tmp_mbuild
797
798	if [[ $found = false ]]
799	then
800	printf "\n +++ no compiler options found in configuration file"
801	printf "\n for \"$remote_host_string\" "
802	locat=config_file; exit
803	fi
804
805
806
807	# get modules to be loaded
808	line=""
809	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
810	while read line1
811	do
812
813	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
814	then
815	line="$line1"
816	fi
817
818	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
819	then
820	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
821	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
822	fi
823
824	done < $tmp_mbuild
825
826
827
828
829	# LADER-OPTIONEN ERMITTELN
830	line=""
831	found=false
832	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
833	while read line1
834	do
835
836	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
837	then
838	line="$line1"
839	fi
840
841	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
842	then
843	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
844	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
845	found=true
846
847	# NETCDF-LIBRARY HINZUFUEGEN
848	loader_options="$loader_options $netcdf_lib"
849	fi
850
851	done < $tmp_mbuild
852
853	if [[ $found = false ]]
854	then
855	printf "\n +++ no loader options found in configuration file"
856	printf "\n for \"$remote_host_string\" "
857	locat=config_file; exit
858	fi
859
860
861	printf "\n\n#------------------------------------------------------------------------# \n"
862	if [[ $remote_host = $local_host ]]
863	then
864	column1="remote_host:"; column2="$remote_host (= local host!)"
865	else
866	column1="remote_host:"; column2=$remote_host
867	fi
868	printf "\| $column1$column2 \| \n"
869	printf "\| \| \n"
870	column1="conditions:"; column2="$condition1 $condition2"
871	printf "\| $column1$column2 \| \n"
872	column1="make depository:"; column2=$remote_md
873	printf "\| $column1$column2 \| \n"
874	line=$(echo "$remote_md" \| cut -c51-)
875	while [[ "$line" != "" ]]
876	do
877	column1=""
878	column2=$line
879	printf "\| $column1$column2 \| \n"
880	line=$(echo "$line" \| cut -c51-)
881	done
882	if [[ $compile_utility_programs = true ]]
883	then
884	column1="utility directory:"; column2=$remote_ud
885	printf "\| $column1$column2 \| \n"
886	fi
887	column1="username:"; column2=$remote_username
888	printf "\| $column1$column2 \| \n"
889	column1="addres:"; column2=$remote_addres
890	printf "\| $column1$column2 \| \n"
891	column1="compiler:"; column2=$compiler_name
892	printf "\| $column1$column2 \| \n"
893	if [[ $compile_utility_programs = true ]]
894	then
895	column1="serial compiler:"; column2=$compiler_name_ser
896	printf "\| $column1$column2 \| \n"
897	fi
898	if [[ "$make_options" != "" ]]
899	then
900	column1="make options:"; column2=$make_options
901	printf "\| $column1$column2 \| \n"
902	fi
903	column1="cpp options:"; column2=$cpp_options
904	printf "\| $column1$column2 \| \n"
905	line=$(echo "$cpp_options" \| cut -c51-)
906	while [[ "$line" != "" ]]
907	do
908	column1=""
909	column2=$line
910	printf "\| $column1$column2 \| \n"
911	line=$(echo "$line" \| cut -c51-)
912	done
913	column1="compiler options:"; column2=$compiler_options
914	printf "\| $column1$column2 \| \n"
915	line=$(echo "$compiler_options" \| cut -c51-)
916	while [[ "$line" != "" ]]
917	do
918	column1=""
919	column2=$line
920	printf "\| $column1$column2 \| \n"
921	line=$(echo "$line" \| cut -c51-)
922	done
923	column1="loader options:"; column2=$loader_options
924	printf "\| $column1$column2 \| \n"
925	line=$(echo "$loader_options" \| cut -c51-)
926	while [[ "$line" != "" ]]
927	do
928	column1=""
929	column2=$line
930	printf "\| $column1$column2 \| \n"
931	line=$(echo "$line" \| cut -c51-)
932	done
933	if [[ $modules != "" ]]
934	then
935	column1="modules to be load:"; column2=$modules
936	printf "\| $column1$column2 \| \n"
937	line=$(echo "$modules" \| cut -c51-)
938	while [[ "$line" != "" ]]
939	do
940	column1=""
941	column2=$line
942	printf "\| $column1$column2 \| \n"
943	line=$(echo "$line" \| cut -c51-)
944	done
945	fi
946	printf "#------------------------------------------------------------------------# \n"
947
948	if [[ $silent = false ]]
949	then
950	answer=dummy
951	printf "\n\n"
952	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
953	do
954	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
955	read answer
956	done
957	if [[ $answer = a \|\| $answer = A ]]
958	then
959	locat=user_abort; exit
960	fi
961	if [[ $answer = c \|\| $answer = C ]]
962	then
963	silent=true
964	fi
965	if [[ $answer = s \|\| $answer = S ]]
966	then
967	continue
968	fi
969	fi
970
971
972	# make on remote host
973	if [[ $remote_host != $local_host ]]
974	then
975
976	if [[ $compile_utility_programs = false ]]
977	then
978
979	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
980	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
981	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
982	if [[ $remote_host != lctit ]]
983	then
984	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
985	else
986	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
987	# MIT SSH, DESHALB AUFRUF PER PIPE
988	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
989	fi
990	if [[ $local_host = decalpha ]]
991	then
992	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
993	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
994	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
995	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
996	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
997	else
998	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
999	fi
1000
1001
1002
1003	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1004	echo " *** untar previous update on remote host, if existing"
1005	if [[ $remote_host != lctit ]]
1006	then
1007	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1008	else
1009	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1010	# MIT SSH, DESHALB AUFRUF PER PIPE
1011	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1012	fi
1013
1014
1015	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1016	echo " *** untar actual sources on remote host"
1017	if [[ $remote_host != lctit ]]
1018	then
1019	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1020	else
1021	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1022	# MIT SSH, DESHALB AUFRUF PER PIPE
1023	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1024	fi
1025
1026
1027	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1028	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1029	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1030	# Z.B. DIE PFADE ZUM COMPILER)
1031	echo " *** execute \"make\" on remote host"
1032
1033
1034	# generate make call with make options
1035	if [[ $remote_host = nech ]]
1036	then
1037	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1038	else
1039	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1040	fi
1041
1042	# generate command to load modules, if modules are given
1043	if [[ "$modules" != "" ]]
1044	then
1045	module_calls="module load ${modules};"
1046
1047	# bugfix for wrong netcdf module
1048	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1049	then
1050	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1051	then
1052	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1053	fi
1054	fi
1055	else
1056	module_calls=""
1057	fi
1058
1059	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1060	then
1061
1062	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1063
1064	elif [[ $remote_host = ibmh ]]
1065	then
1066
1067	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1068
1069	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1070	then
1071
1072	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1073	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1074
1075	elif [[ $remote_host = lctit ]]
1076	then
1077
1078	echo " " > ${remote_host}_last_make_protokoll
1079	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1080	do
1081	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1082	done
1083
1084	elif [[ $remote_host = lcxt4 ]]
1085	then
1086
1087	print ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1088
1089	else
1090
1091	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1092
1093	fi
1094
1095	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1096	then
1097	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1098	if [[ $silent = false ]]
1099	then
1100	answer=dummy
1101	printf "\n"
1102	while [[ "$answer" != c && "$answer" != k ]]
1103	do
1104	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1105	read answer
1106	if [[ "$answer" = l ]]
1107	then
1108	more ${remote_host}_last_make_protokoll
1109	fi
1110	done
1111	if [[ $answer = k ]]
1112	then
1113	locat=user_abort; exit
1114	fi
1115	fi
1116	fi
1117
1118
1119
1120	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1121	printf "\n *** tar update on remote host ..."
1122	if [[ $remote_host != lctit ]]
1123	then
1124	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1125	else
1126	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1127	# MIT SSH, DESHALB AUFRUF PER PIPE
1128	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1129	fi
1130
1131
1132	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1133	# printf "\n *** \"make clean\" on remote host ..."
1134	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1135	# printf "\n"
1136
1137
1138
1139
1140	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1141	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1142	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1143	elif [[ $compile_utility_programs = true ]]
1144	then
1145
1146	printf "\n\n"
1147	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1148	cd ${local_source_path}/../SCRIPTS
1149
1150	if [[ $remote_host != lctit ]]
1151	then
1152	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1153	else
1154	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1155	# MIT SSH, DESHALB AUFRUF PER PIPE
1156	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1157	fi
1158
1159	# KOPIEREN DER SCRIPTE
1160	if [[ $local_host = decalpha ]]
1161	then
1162	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1163	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1164	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1165	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1166	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1167	else
1168	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1169	fi
1170
1171	cd - > /dev/null
1172	cd ${local_source_path}/../UTIL
1173
1174
1175	# KOPIEREN DER UTILITY-PROGRAMME
1176	if [[ $local_host = decalpha ]]
1177	then
1178	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1179	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1180	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1181	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1182	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1183	else
1184	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1185	fi
1186
1187
1188
1189	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1190	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1191	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1192	# Z.B. DIE PFADE ZUM COMPILER)
1193	echo " *** execute \"make\" on remote host"
1194
1195	if [[ $remote_host = nech ]]
1196	then
1197	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1198	else
1199	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1200	fi
1201
1202	# generate command to load modules, if modules are given
1203	if [[ "$modules" != "" ]]
1204	then
1205	module_calls="module load ${modules};"
1206
1207	# bugfix for wrong netcdf module
1208	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1209	then
1210	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1211	then
1212	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1213	fi
1214	fi
1215	else
1216	module_calls=""
1217	fi
1218
1219	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1220	then
1221
1222	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1223
1224	elif [[ $remote_host = ibmh ]]
1225	then
1226
1227	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1228
1229	elif [[ $remote_host = lctit ]]
1230	then
1231
1232	echo " " > ${remote_host}_last_make_protokoll
1233	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1234	do
1235	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1236	done
1237
1238	elif [[ $remote_host = lcxt4 ]]
1239	then
1240
1241	print ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1242
1243	else
1244
1245	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1246
1247	fi
1248
1249	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1250
1251	rm -rf ${remote_host}_last_make_protokoll
1252
1253	# make on local host
1254	else
1255
1256	# workaround for lcxt4
1257	if [[ $remote_host = lcxt4 ]]
1258	then
1259	. /opt/modules/default/init/ksh
1260	fi
1261
1262	# first load modules, if given
1263	if [[ "$modules" != "" ]]
1264	then
1265	module load ${modules}
1266	fi
1267
1268
1269	if [[ $compile_utility_programs = false ]]
1270	then
1271
1272	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1273	eval remote_md=$remote_md
1274	if [[ ! -d $remote_md ]]
1275	then
1276	if mkdir $remote_md
1277	then
1278	printf "\n\n *** directory for make depository:"
1279	printf "\n $remote_md"
1280	printf "\n was created\n"
1281	else
1282	printf "\n +++ directory for make depository:"
1283	printf "\n $remote_md"
1284	printf "\n cannot be created"
1285	locat=local_depository_path; exit
1286	fi
1287	fi
1288
1289	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1290	echo " "
1291	echo " *** updating sources in $remote_md"
1292	cd $remote_md
1293	cp $local_source_path/${mainprog}_sources.tar .
1294	tar xf ${mainprog}_sources.tar
1295
1296	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1297	echo " "
1298	echo " *** execute \"make\" on local host"
1299
1300	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1301
1302	if [[ $? != 0 ]]
1303	then
1304	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1305	if [[ $silent = false ]]
1306	then
1307	answer=dummy
1308	printf "\n"
1309	while [[ "$answer" != c && "$answer" != k ]]
1310	do
1311	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1312	read answer
1313	if [[ "$answer" = l ]]
1314	then
1315	more ${remote_host}_last_make_protokoll
1316	fi
1317	done
1318	if [[ $answer = k ]]
1319	then
1320	locat=user_abort; exit
1321	fi
1322	fi
1323	fi
1324
1325
1326	# TAR NEW VERSION ON LOCAL HOST
1327	printf "\n *** tar update on local host ..."
1328	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1329
1330
1331	# COMPILE THE UTILITY PROGRAMS
1332	elif [[ $compile_utility_programs = true ]]
1333	then
1334	printf "\n\n"
1335	echo " *** compiling the utility programs ..."
1336	cd ${local_source_path}/../UTIL
1337
1338	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1339	touch *.f90
1340	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1341	cd - > /dev/null
1342	fi
1343
1344	fi
1345
1346	done
1347
1348
1349	if [[ $host_found = false ]]
1350	then
1351	if [[ $host = all ]]
1352	then
1353	printf "\n +++ no hosts found in configuration file"
1354	else
1355	printf "\n +++ host \"$host\" not found in configuration file"
1356	fi
1357	locat=config_file; exit
1358	fi
1359
1360
1361
1362	# FINAL WORK
1363	rm -f hosts_found_in_config_file
1364

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |