Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 421

Last change on this file since 421 was 407, checked in by maronga, 15 years ago
humidity for non-flat topography implemented, re-adjustments for lcxt4
Property svn:keywords set to `Id Rev`
File size: 49.0 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 407 2009-12-01 15:01:15Z raasch $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90	# from configuration file
91	# host identifier (local_host) is read from config file
92	# 10/10/07 - Siggi - bugfix: handling of comment lines
93	# 18/07/08 - Siggi - adapted for lcsgih
94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95	# ({mainprog}_current_version)
96	# 02/10/08 - Siggi - adapted for lcxt4
97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
98	# remains in source directory, one depository per block
99	# (given in the config-file) is created, allways all
100	# files from the source directory are copied to the
101	# respective depository, no additional file checks are
102	# done any more (version 2.1)
103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
104	# other machines)
105	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
106	# .dvrserver.config
107	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
108	# 25/08/09 - BjornM- adapted for lck
109	# 01/12/09 - BjornM- re-adjustments for lcxt4
110
111
112
113	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
114	compile_utility_programs=false
115	config_file=.mrun.config
116	fimm=false
117	host=all
118	host_found=false
119	locat=normal
120	makefile=""
121	remote_mode=interactive
122	scirocco=false
123	silent=false
124	suf=f90
125	update=false
126	working_directory=`pwd`
127
128	typeset -i ih ihost=0
129
130	typeset -R30 calltime
131	typeset -L20 column1
132	typeset -L50 column2
133	typeset -L70 column3
134	typeset -L40 version="MBUILD 2.1 Rev$Rev: 407 $"
135
136	# FEHLERBEHANDLUNG
137	# BEI EXIT:
138	trap 'rm -rf $working_directory/tmp_mbuild
139	if [[ $locat != normal ]]
140	then
141	printf "\n\n +++ mbuild killed \n\n"
142	else
143	printf "\n\n *** mbuild finished \n\n"
144	fi' exit
145
146
147	# BEI TERMINAL-BREAK:
148	trap 'rm -rf $working_directory/tmp_mbuild
149	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
150	exit
151	' 2
152
153
154	tmp_mbuild=${working_directory}/tmp_mbuild
155
156	# SHELLSCRIPT-OPTIONEN EINLESEN
157	while getopts :c:h:m:rs:u option
158	do
159	case $option in
160	(c) config_file=$OPTARG;;
161	(h) host=$OPTARG;;
162	(m) makefile=$OPTARG;;
163	(r) remote_mode=batch;;
164	(s) suf=$OPTARG;;
165	(u) compile_utility_programs=true;;
166	(\?) printf "\n +++ unknown option $OPTARG \n";
167	locat=parameter; exit;;
168	esac
169	done
170
171
172
173	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
174	if [[ $remote_mode = batch ]]
175	then
176	printf "\n +++ sorry, batch mode does not work! \n"
177	locat=parameter; exit
178	fi
179
180
181
182	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
183	if [[ ! -f $config_file ]]
184	then
185	printf "\n +++ configuration file: "
186	printf "\n $config_file"
187	printf "\n does not exist"
188	locat=configuration; exit
189	fi
190
191
192
193	# LOKALEN RECHNER ERMITTELN
194	local_host_real_name=$(hostname)
195	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
196
197
198
199	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
200	line=""
201	grep "%host_identifier" $config_file > $tmp_mbuild
202	while read line
203	do
204	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
205	then
206	HOSTNAME=`echo $line \| cut -d" " -s -f2`
207	host_identifier=`echo $line \| cut -d" " -s -f3`
208	if [[ $local_host_real_name = $HOSTNAME ]]
209	then
210	local_host=$host_identifier
211	break
212	fi
213	fi
214	done < $tmp_mbuild
215
216	if [[ "$local_host" = "" ]]
217	then
218	printf "\n +++ no host identifier found in configuration file \"$config_file\""
219	printf "\n for local host \"$local_host_real_name\"."
220	printf "\n Please add line"
221	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
222	printf "\n to the configuration file."
223	locat=local_host; exit
224	fi
225
226
227
228	[[ $local_host_real_name = scirocco ]] && scirocco=true
229	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
230
231
232
233	if [[ $local_host != ibms ]]
234	then
235	config_file=$PWD/$config_file
236	else
237	config_file=`pwd`/$config_file
238	fi
239
240
241
242	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
243	line=""
244	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
245	while read line
246	do
247	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
248	then
249	local_username=`echo $line \| cut -d" " -s -f2`
250	fi
251	done < $tmp_mbuild
252
253
254	if [[ "$local_username" = "" ]]
255	then
256	printf "\n +++ no user name found in configuration file"
257	printf "\n for local host \"$local_host\" "
258	locat=config_file; exit
259	fi
260
261
262	# LOKALEN QUELLTEXTPFAD ERMITTELN.
263	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
264	# VEREINBART WURDE.
265	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
266	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
267	line=""
268	grep "%" $config_file > $tmp_mbuild
269	while read line
270	do
271	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
272	then
273	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
274	value=`echo $line \| cut -d" " -s -f2`
275	eval export $var=\$value
276	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
277	fi
278	done < $tmp_mbuild
279
280	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
281	line=""
282	grep "%source_path" $config_file > $tmp_mbuild
283	while read line
284	do
285	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
286	then
287	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
288	then
289	global_source_path=`echo $line \| cut -d" " -s -f2`
290	fi
291	fi
292	done < $tmp_mbuild
293
294	line=""
295	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
296	while read line
297	do
298	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
299	then
300	local_source_path=`echo $line \| cut -d" " -s -f2`
301	fi
302	done < $tmp_mbuild
303
304	if [[ "$local_source_path" = "" ]]
305	then
306	if [[ "$global_source_path" != "" ]]
307	then
308	local_source_path=$global_source_path
309	else
310	printf "\n +++ no source path found in configuration file"
311	printf "\n for local host \"$local_host\" "
312	printf "\n please set \"\%source_path\" in configuration file"
313	locat=config_file; exit
314	fi
315	fi
316	eval local_source_path=$local_source_path
317	eval local_source_path=$local_source_path
318
319
320
321	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
322	line=""
323	grep "%depository_path" $config_file > $tmp_mbuild
324	while read line
325	do
326	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
327	then
328	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
329	then
330	global_depository_path=`echo $line \| cut -d" " -s -f2`
331	fi
332	fi
333	done < $tmp_mbuild
334
335
336
337	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
338	# VEREINBART WURDE
339	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
340	then
341	printf "\n +++ no main program or more than one main program defined"
342	printf "\n in configuration file"
343	locat=configuration; exit
344	else
345	line=`grep "%mainprog" $config_file`
346	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
347	then
348	printf "\n +++ no main program defined in configuration file"
349	locat=configuration; exit
350	fi
351	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
352	fi
353
354
355
356	# MAKEFILE vorhanden
357	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
358	if [[ ! -f $makefile ]]
359	then
360	printf "\n +++ makefile: "
361	printf "\n $makefile"
362	printf "\n does not exist"
363	locat=makefile; exit
364	fi
365
366
367	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
368	calltime=$(date)
369	printf "\n"
370	printf "#------------------------------------------------------------------------# \n"
371	printf "\| $version$calltime \| \n"
372	printf "\| \| \n"
373	column1="called on:"; column2=$local_host_real_name
374	printf "\| $column1$column2 \| \n"
375	column1="local username:"; column2=$local_username
376	printf "\| $column1$column2 \| \n"
377	column1="local IP-addres:"; column2=$local_addres
378	printf "\| $column1$column2 \| \n"
379	column1="config file:"; column2=$config_file
380	printf "\| $column1$column2 \| \n"
381	column1="makefile:"; column2=$makefile
382	printf "\| $column1$column2 \| \n"
383	column1="local source path:"; column2=$local_source_path
384	printf "\| $column1$column2 \| \n"
385	printf "#------------------------------------------------------------------------# \n"
386
387	# printf "\| \| \n"
388
389
390	if [[ $compile_utility_programs = false ]]
391	then
392
393	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
394	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
395	cd $local_source_path
396	printf "\n\n *** tar of makefile and source files in $local_source_path"
397	tar -cf ${mainprog}_sources.tar Makefile *.$suf
398	printf "\n"
399
400	fi
401
402
403
404	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
405	if [[ $host = all ]]
406	then
407	printf "\n *** updates will be made for ALL hosts found in"
408	printf "\n the configuration file"
409	else
410	printf "\n *** update will be made for host \"$host\" "
411	fi
412
413	if [[ $silent = false ]]
414	then
415	answer=dummy
416	printf "\n\n"
417	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
418	do
419	printf " >>> continue (y/n) ? "
420	read answer
421	done
422	if [[ $answer = n \|\| $answer = N ]]
423	then
424	locat=user_abort; exit
425	fi
426	fi
427
428
429
430
431	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
432	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
433	printf "\n *** scanning configuration file for host(s) ..."
434
435	grep %fopts $config_file > $tmp_mbuild
436	while read line
437	do
438	# KOMMENTARZEILEN UEBERSPRINGEN
439	[[ $(echo $line \| cut -c1) = "#" ]] && continue
440	(( ihost = ihost + 1 ))
441	hostline[$ihost]="$line"
442	done < $tmp_mbuild
443
444
445	while (( ih < ihost ))
446	do
447
448	(( ih = ih + 1 ))
449
450	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
451	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
452	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
453	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
454	remote_host=`echo $remote_host_string \| cut -d" " -f1`
455	if [[ $host != all ]]
456	then
457	[[ $remote_host != $host ]] && continue
458	fi
459	host_found=true
460	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
461	if [[ $condition1 = $remote_host ]]
462	then
463	condition1=""
464	else
465	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
466	fi
467
468	netcdf_inc=""
469	netcdf_lib=""
470
471	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
472	case $remote_host in
473	(lcmuk) remote_addres=130.75.105.2;;
474	(lcsgib) remote_addres=130.73.232.102;;
475	(lcsgih) remote_addres=130.75.4.102;;
476	(lck) remote_addres=165.132.26.61;;
477	(lctit) remote_addres=172.17.75.161;;
478	(lcxt4) remote_addres=129.177.20.113;;
479	(decalpha) remote_addres=165.132.26.56;;
480	(ibmh) remote_addres=136.172.40.15;;
481	(ibms) remote_addres=150.183.5.101;;
482	(ibmy) remote_addres=165.132.26.58;;
483	(nech) remote_addres=136.172.44.192;;
484	(neck) remote_addres=133.5.178.11;;
485	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
486	(*) if [[ $local_host != $remote_host ]]
487	then
488	printf "\n +++ remote host \"$remote_host\" unknown";
489	printf "\n please inform S. Raasch!"
490	fi;;
491	esac
492
493
494	# REMOTE-USERNAMEN ERMITTELN
495	line=""
496	found=false
497	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
498	while read line1
499	do
500
501	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
502	then
503	line="$line1"
504	fi
505
506	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
507	then
508	remote_username=`echo $line \| cut -d" " -s -f2`
509	found=true
510	fi
511
512	done < $tmp_mbuild
513
514	if [[ $found = false ]]
515	then
516	printf "\n +++ no remote username found in configuration file"
517	printf "\n for \"$remote_host_string\" "
518	locat=config_file; exit
519	fi
520
521
522	# REMOTE-QUELLTEXTPFAD ERMITTELN
523	line=""
524	remote_source_path=""
525	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
526	while read line1
527	do
528
529	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
530	then
531	line="$line1"
532	fi
533
534	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
535	then
536	remote_source_path=`echo $line \| cut -d" " -s -f2`
537	fi
538
539	done < $tmp_mbuild
540
541	if [[ "$remote_source_path" = "" ]]
542	then
543	if [[ "$global_source_path" != "" ]]
544	then
545	remote_source_path=$global_source_path
546	else
547	printf "\n +++ no source path found in configuration file"
548	printf "\n for \"$remote_host_string\" "
549	locat=config_file; exit
550	fi
551	fi
552
553	remote_ud=${remote_source_path}/../UTIL
554	remote_ud=$(eval echo $remote_ud)
555
556
557	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
558	remote_md=""
559	line=""
560	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
561	while read line1
562	do
563
564	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
565	then
566	line="$line1"
567	fi
568
569	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
570	then
571	remote_md=`echo $line \| cut -d" " -s -f2`
572	fi
573
574	done < $tmp_mbuild
575
576	if [[ "$remote_md" = "" ]]
577	then
578	if [[ "$global_depository_path" != "" ]]
579	then
580	remote_md=$global_depository_path
581	else
582	printf "\n +++ no depository path found in configuration file"
583	printf "\n for \"$remote_host_string\" "
584	printf "\n please set \"\%depository_path\" in configuration file"
585	locat=config_file; exit
586	fi
587	fi
588
589	remote_md=$(eval echo $remote_md)
590	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
591	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
592
593
594	# COMPILERNAMEN ERMITTELN
595	line=""
596	found=false
597	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
598	while read line1
599	do
600
601	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
602	then
603	line="$line1"
604	fi
605
606	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
607	then
608	compiler_name=`echo $line \| cut -d" " -s -f2`
609	found=true
610	fi
611
612	done < $tmp_mbuild
613
614	if [[ $found = false ]]
615	then
616	printf "\n +++ no compiler name found in configuration file"
617	printf "\n for \"$remote_host_string\" "
618	locat=config_file; exit
619	fi
620
621
622	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
623	# SERIELLER COMPILERNAME ERMITTELT WERDEN
624	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
625	then
626	line=""
627	found=false
628	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
629	while read line1
630	do
631
632	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
633	then
634	line="$line1"
635	fi
636
637	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
638	then
639	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
640	found=true
641	fi
642
643	done < $tmp_mbuild
644
645	if [[ $found = false ]]
646	then
647	printf "\n +++ no serial compiler name found in configuration file"
648	printf "\n for \"$remote_host_string\" "
649	locat=config_file; exit
650	fi
651	else
652	compiler_name_ser=$compiler_name
653	fi
654
655
656
657	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
658	line=""
659	found=false
660	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
661	while read line1
662	do
663
664	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
665	then
666	line="$line1"
667	fi
668
669	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
670	then
671	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
672	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
673	found=true
674	fi
675
676	done < $tmp_mbuild
677
678	if [[ $found = false ]]
679	then
680	printf "\n +++ no preprocessor options found in configuration file"
681	printf "\n for \"$remote_host_string\" "
682	locat=config_file; exit
683	fi
684
685
686	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
687	for string in $remote_host_string
688	do
689	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
690	then
691	cpp_options="$cpp_options -D__lc "
692	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
693	then
694	cpp_options="${cpp_options},-D__ibm"
695	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
696	then
697	cpp_options="${cpp_options} -D__nec"
698	else
699	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
700	then
701	cpp_options="${cpp_options},-D__$string"
702	else
703	cpp_options="$cpp_options -D__$string "
704	fi
705	fi
706	done
707
708
709
710	# NETCDF-OPTIONEN ERMITTELN
711	line=""
712	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
713	while read line1
714	do
715
716	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
717	then
718	line="$line1"
719	fi
720
721	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
722	then
723	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
724	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
725	fi
726
727	done < $tmp_mbuild
728
729	line=""
730	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
731	while read line1
732	do
733
734	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
735	then
736	line="$line1"
737	fi
738
739	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
740	then
741	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
742	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
743	fi
744
745	done < $tmp_mbuild
746
747
748
749	# COMPILEROPTIONEN ERMITTELN
750	line=""
751	found=false
752	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
753	while read line1
754	do
755
756	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
757	then
758	line="$line1"
759	fi
760
761	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
762	then
763	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
764	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
765	found=true
766
767	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
768	compiler_options="$compiler_options $netcdf_inc"
769	fi
770
771	done < $tmp_mbuild
772
773	if [[ $found = false ]]
774	then
775	printf "\n +++ no compiler options found in configuration file"
776	printf "\n for \"$remote_host_string\" "
777	locat=config_file; exit
778	fi
779
780
781
782	# MPI LIBRARY ERMITTELN
783	line=""
784	found=false
785	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
786	while read line1
787	do
788
789	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
790	then
791	line="$line1"
792	fi
793
794	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
795	then
796	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
797	mpilib=`echo $line \| cut -d" " -s -f2`
798	found=true
799	fi
800
801	done < $tmp_mbuild
802
803	[[ $found = false ]] && mpilib=mpt
804
805
806
807
808	# LADER-OPTIONEN ERMITTELN
809	line=""
810	found=false
811	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
812	while read line1
813	do
814
815	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
816	then
817	line="$line1"
818	fi
819
820	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
821	then
822	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
823	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
824	found=true
825
826	# NETCDF-LIBRARY HINZUFUEGEN
827	loader_options="$loader_options $netcdf_lib"
828	fi
829
830	done < $tmp_mbuild
831
832	if [[ $found = false ]]
833	then
834	printf "\n +++ no loader options found in configuration file"
835	printf "\n for \"$remote_host_string\" "
836	locat=config_file; exit
837	fi
838
839
840	printf "\n\n#------------------------------------------------------------------------# \n"
841	if [[ $remote_host = $local_host ]]
842	then
843	column1="remote_host:"; column2="$remote_host (= local host!)"
844	else
845	column1="remote_host:"; column2=$remote_host
846	fi
847	printf "\| $column1$column2 \| \n"
848	printf "\| \| \n"
849	column1="conditions:"; column2="$condition1 $condition2"
850	printf "\| $column1$column2 \| \n"
851	column1="make depository:"; column2=$remote_md
852	printf "\| $column1$column2 \| \n"
853	line=$(echo "$remote_md" \| cut -c51-)
854	while [[ "$line" != "" ]]
855	do
856	column1=""
857	column2=$line
858	printf "\| $column1$column2 \| \n"
859	line=$(echo "$line" \| cut -c51-)
860	done
861	if [[ $compile_utility_programs = true ]]
862	then
863	column1="utility directory:"; column2=$remote_ud
864	printf "\| $column1$column2 \| \n"
865	fi
866	column1="username:"; column2=$remote_username
867	printf "\| $column1$column2 \| \n"
868	column1="addres:"; column2=$remote_addres
869	printf "\| $column1$column2 \| \n"
870	column1="compiler:"; column2=$compiler_name
871	printf "\| $column1$column2 \| \n"
872	if [[ $compile_utility_programs = true ]]
873	then
874	column1="serial compiler:"; column2=$compiler_name_ser
875	printf "\| $column1$column2 \| \n"
876	fi
877	column1="cpp options:"; column2=$cpp_options
878	printf "\| $column1$column2 \| \n"
879	line=$(echo "$cpp_options" \| cut -c51-)
880	while [[ "$line" != "" ]]
881	do
882	column1=""
883	column2=$line
884	printf "\| $column1$column2 \| \n"
885	line=$(echo "$line" \| cut -c51-)
886	done
887	column1="compiler options:"; column2=$compiler_options
888	printf "\| $column1$column2 \| \n"
889	line=$(echo "$compiler_options" \| cut -c51-)
890	while [[ "$line" != "" ]]
891	do
892	column1=""
893	column2=$line
894	printf "\| $column1$column2 \| \n"
895	line=$(echo "$line" \| cut -c51-)
896	done
897	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
898	then
899	column1="mpi library:"; column2=$mpilib
900	printf "\| $column1$column2 \| \n"
901	fi
902	column1="loader options:"; column2=$loader_options
903	printf "\| $column1$column2 \| \n"
904	line=$(echo "$loader_options" \| cut -c51-)
905	while [[ "$line" != "" ]]
906	do
907	column1=""
908	column2=$line
909	printf "\| $column1$column2 \| \n"
910	line=$(echo "$line" \| cut -c51-)
911	done
912	printf "#------------------------------------------------------------------------# \n"
913
914	if [[ $silent = false ]]
915	then
916	answer=dummy
917	printf "\n\n"
918	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
919	do
920	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
921	read answer
922	done
923	if [[ $answer = a \|\| $answer = A ]]
924	then
925	locat=user_abort; exit
926	fi
927	if [[ $answer = c \|\| $answer = C ]]
928	then
929	silent=false
930	fi
931	if [[ $answer = s \|\| $answer = S ]]
932	then
933	continue
934	fi
935	fi
936
937
938	if [[ $remote_mode = batch ]]
939	then
940
941	# BATCH-JOB PARAMETER SETZEN
942	case $remote_host in
943	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
944	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
945	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
946	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
947	esac
948
949
950	# BATCH-JOB ZUSAMMENSTELLEN
951	printf "\n *** creating batch-job for remote host"
952	echo " " > mbuild_job
953
954	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
955	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
956	if [[ $remote_host = t3ej2 ]]
957	then
958	echo "set +vx" >> mbuild_job
959	echo ". .profile" >> mbuild_job
960	echo "set -x" >> mbuild_job
961	fi
962
963	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
964	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
965	then
966	echo "module list" >> mbuild_job
967	fi
968
969
970	# WECHSEL IN TEMPORAERES VERZEICHNIS
971	echo "cd ${remote_md}" >> mbuild_job
972
973
974	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
975	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
976	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
977
978
979	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
980	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
981
982
983	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
984	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
985
986
987	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
988	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
989	echo "chmod u+w *" >> mbuild_job
990
991	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
992	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
993
994
995	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
996	echo "make clean" >> mbuild_job
997	echo "rm ${mainprog}_sources.tar" >> mbuild_job
998	echo "rm *.f90 Makefile" >> mbuild_job
999
1000
1001
1002	# JOB MITTELS SUBJOB STARTEN
1003	printf "\n *** sending batch job to remote host"
1004	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1005
1006
1007	# JOBFILE LOESCHEN
1008	# rm aljob
1009
1010	else
1011
1012	if [[ $remote_host != $local_host ]]
1013	then
1014
1015	if [[ $compile_utility_programs = false ]]
1016	then
1017
1018	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1019	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1020	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1021	if [[ $remote_host != lctit ]]
1022	then
1023	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1024	else
1025	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1026	# MIT SSH, DESHALB AUFRUF PER PIPE
1027	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1028	fi
1029	if [[ $local_host = decalpha ]]
1030	then
1031	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1032	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1033	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1034	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1035	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1036	else
1037	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1038	fi
1039
1040
1041
1042	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1043	echo " *** untar previous update on remote host, if existing"
1044	if [[ $remote_host != lctit ]]
1045	then
1046	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1047	else
1048	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1049	# MIT SSH, DESHALB AUFRUF PER PIPE
1050	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1051	fi
1052
1053
1054	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1055	echo " *** untar actual sources on remote host"
1056	if [[ $remote_host != lctit ]]
1057	then
1058	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1059	else
1060	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1061	# MIT SSH, DESHALB AUFRUF PER PIPE
1062	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1063	fi
1064
1065
1066	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1067	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1068	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1069	# Z.B. DIE PFADE ZUM COMPILER)
1070	echo " *** execute \"make\" on remote host"
1071
1072	if [[ $remote_host = nech ]]
1073	then
1074	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1075	else
1076	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1077	fi
1078
1079	if [[ $remote_host = t3eh ]]
1080	then
1081
1082	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1083
1084	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1085	then
1086
1087	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1088
1089	elif [[ $remote_host = ibmh ]]
1090	then
1091
1092	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1093
1094	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1095	then
1096
1097	print ". /usr/share/modules/init/bash; module load ifort/11.0.069; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1098	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1099	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1100
1101	elif [[ $remote_host = lctit ]]
1102	then
1103
1104	echo " " > ${remote_host}_last_make_protokoll
1105	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1106	do
1107	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1108	done
1109
1110	elif [[ $remote_host = lcxt4 ]]
1111	then
1112
1113	print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1114
1115	else
1116
1117	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1118
1119	fi
1120
1121	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1122	then
1123	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1124	if [[ $silent = false ]]
1125	then
1126	answer=dummy
1127	printf "\n"
1128	while [[ "$answer" != c && "$answer" != k ]]
1129	do
1130	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1131	read answer
1132	if [[ "$answer" = l ]]
1133	then
1134	more ${remote_host}_last_make_protokoll
1135	fi
1136	done
1137	if [[ $answer = k ]]
1138	then
1139	locat=user_abort; exit
1140	fi
1141	fi
1142	fi
1143
1144
1145
1146	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1147	printf "\n *** tar update on remote host ..."
1148	if [[ $remote_host != lctit ]]
1149	then
1150	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1151	else
1152	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1153	# MIT SSH, DESHALB AUFRUF PER PIPE
1154	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1155	fi
1156
1157
1158	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1159	# printf "\n *** \"make clean\" on remote host ..."
1160	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1161	# printf "\n"
1162
1163
1164
1165
1166	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1167	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1168	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1169	elif [[ $compile_utility_programs = true ]]
1170	then
1171
1172	printf "\n\n"
1173	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1174	cd ${local_source_path}/../SCRIPTS
1175
1176	if [[ $remote_host != lctit ]]
1177	then
1178	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1179	else
1180	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1181	# MIT SSH, DESHALB AUFRUF PER PIPE
1182	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1183	fi
1184
1185	# KOPIEREN DER SCRIPTE
1186	if [[ $local_host = decalpha ]]
1187	then
1188	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1189	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1190	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1191	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1192	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1193	else
1194	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1195	fi
1196
1197	cd - > /dev/null
1198	cd ${local_source_path}/../UTIL
1199
1200
1201	# KOPIEREN DER UTILITY-PROGRAMME
1202	if [[ $local_host = decalpha ]]
1203	then
1204	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1205	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1206	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1207	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1208	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1209	else
1210	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1211	fi
1212
1213
1214
1215	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1216	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1217	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1218	# Z.B. DIE PFADE ZUM COMPILER)
1219	echo " *** execute \"make\" on remote host"
1220
1221	if [[ $remote_host = nech ]]
1222	then
1223	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1224	else
1225	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1226	fi
1227
1228	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1229	then
1230
1231	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1232
1233	elif [[ $remote_host = ibmh ]]
1234	then
1235
1236	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1237
1238	elif [[ $remote_host = lctit ]]
1239	then
1240
1241	echo " " > ${remote_host}_last_make_protokoll
1242	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1243	do
1244	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1245	done
1246
1247	elif [[ $remote_host = lcxt4 ]]
1248	then
1249
1250	print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1251
1252	else
1253
1254	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1255
1256	fi
1257
1258	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1259
1260	rm -rf ${remote_host}_last_make_protokoll
1261
1262	else
1263
1264	if [[ $compile_utility_programs = false ]]
1265	then
1266
1267	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1268	eval remote_md=$remote_md
1269	if [[ ! -d $remote_md ]]
1270	then
1271	if mkdir $remote_md
1272	then
1273	printf "\n\n *** directory for make depository:"
1274	printf "\n $remote_md"
1275	printf "\n was created\n"
1276	else
1277	printf "\n +++ directory for make depository:"
1278	printf "\n $remote_md"
1279	printf "\n cannot be created"
1280	locat=local_depository_path; exit
1281	fi
1282	fi
1283
1284	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1285	echo " "
1286	echo " *** updating sources in $remote_md"
1287	cd $remote_md
1288	cp $local_source_path/${mainprog}_sources.tar .
1289	tar xf ${mainprog}_sources.tar
1290
1291	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1292	echo " "
1293	echo " *** execute \"make\" on local host"
1294
1295	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1296
1297	if [[ $? != 0 ]]
1298	then
1299	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1300	if [[ $silent = false ]]
1301	then
1302	answer=dummy
1303	printf "\n"
1304	while [[ "$answer" != c && "$answer" != k ]]
1305	do
1306	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1307	read answer
1308	if [[ "$answer" = l ]]
1309	then
1310	more ${remote_host}_last_make_protokoll
1311	fi
1312	done
1313	if [[ $answer = k ]]
1314	then
1315	locat=user_abort; exit
1316	fi
1317	fi
1318	fi
1319
1320
1321	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1322	printf "\n *** tar update on local host ..."
1323	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1324
1325
1326	# COMPILE THE UTILITY PROGRAMS
1327	elif [[ $compile_utility_programs = true ]]
1328	then
1329	printf "\n\n"
1330	echo " *** compiling the utility programs ..."
1331	cd ${local_source_path}/../UTIL
1332	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1333	cd - > /dev/null
1334	fi
1335
1336	fi
1337
1338	fi
1339	done
1340
1341
1342	if [[ $host_found = false ]]
1343	then
1344	if [[ $host = all ]]
1345	then
1346	printf "\n +++ no hosts found in configuration file"
1347	else
1348	printf "\n +++ host \"$host\" not found in configuration file"
1349	fi
1350	locat=config_file; exit
1351	fi
1352
1353
1354
1355	# ABSCHLIESSENDE ARBEITEN
1356	rm -f hosts_found_in_config_file
1357

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |