Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 281

Last change on this file since 281 was 266, checked in by raasch, 16 years ago
further updates concerning new dvr-features + documentation
Property svn:keywords set to `Id Rev`
File size: 48.3 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 266 2009-03-25 07:43:59Z letzel $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90	# from configuration file
91	# host identifier (local_host) is read from config file
92	# 10/10/07 - Siggi - bugfix: handling of comment lines
93	# 18/07/08 - Siggi - adapted for lcsgih
94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95	# ({mainprog}_current_version)
96	# 02/10/08 - Siggi - adapted for lcxt4
97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
98	# remains in source directory, one depository per block
99	# (given in the config-file) is created, allways all
100	# files from the source directory are copied to the
101	# respective depository, no additional file checks are
102	# done any more (version 2.1)
103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
104	# other machines)
105	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
106	# .dvrserver.config
107
108
109
110	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
111	compile_utility_programs=false
112	config_file=.mrun.config
113	fimm=false
114	host=all
115	host_found=false
116	locat=normal
117	makefile=""
118	remote_mode=interactive
119	scirocco=false
120	silent=false
121	suf=f90
122	update=false
123	working_directory=`pwd`
124
125	typeset -i ih ihost=0
126
127	typeset -R30 calltime
128	typeset -L20 column1
129	typeset -L50 column2
130	typeset -L70 column3
131	typeset -L40 version="MBUILD 2.1 Rev$Rev: 266 $"
132
133	# FEHLERBEHANDLUNG
134	# BEI EXIT:
135	trap 'rm -rf $working_directory/tmp_mbuild
136	if [[ $locat != normal ]]
137	then
138	printf "\n\n +++ mbuild killed \n\n"
139	else
140	printf "\n\n *** mbuild finished \n\n"
141	fi' exit
142
143
144	# BEI TERMINAL-BREAK:
145	trap 'rm -rf $working_directory/tmp_mbuild
146	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
147	exit
148	' 2
149
150
151	tmp_mbuild=${working_directory}/tmp_mbuild
152
153	# SHELLSCRIPT-OPTIONEN EINLESEN
154	while getopts :c:h:m:rs:u option
155	do
156	case $option in
157	(c) config_file=$OPTARG;;
158	(h) host=$OPTARG;;
159	(m) makefile=$OPTARG;;
160	(r) remote_mode=batch;;
161	(s) suf=$OPTARG;;
162	(u) compile_utility_programs=true;;
163	(\?) printf "\n +++ unknown option $OPTARG \n";
164	locat=parameter; exit;;
165	esac
166	done
167
168
169
170	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
171	if [[ $remote_mode = batch ]]
172	then
173	printf "\n +++ sorry, batch mode does not work! \n"
174	locat=parameter; exit
175	fi
176
177
178
179	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
180	if [[ ! -f $config_file ]]
181	then
182	printf "\n +++ configuration file: "
183	printf "\n $config_file"
184	printf "\n does not exist"
185	locat=configuration; exit
186	fi
187
188
189
190	# LOKALEN RECHNER ERMITTELN
191	local_host_real_name=$(hostname)
192	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
193
194
195
196	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
197	line=""
198	grep "%host_identifier" $config_file > $tmp_mbuild
199	while read line
200	do
201	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
202	then
203	HOSTNAME=`echo $line \| cut -d" " -s -f2`
204	host_identifier=`echo $line \| cut -d" " -s -f3`
205	if [[ $local_host_real_name = $HOSTNAME ]]
206	then
207	local_host=$host_identifier
208	break
209	fi
210	fi
211	done < $tmp_mbuild
212
213	if [[ "$local_host" = "" ]]
214	then
215	printf "\n +++ no host identifier found in configuration file \"$config_file\""
216	printf "\n for local host \"$local_host_real_name\"."
217	printf "\n Please add line"
218	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
219	printf "\n to the configuration file."
220	locat=local_host; exit
221	fi
222
223
224
225	[[ $local_host_real_name = scirocco ]] && scirocco=true
226	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
227
228
229
230	if [[ $local_host != ibms ]]
231	then
232	config_file=$PWD/$config_file
233	else
234	config_file=`pwd`/$config_file
235	fi
236
237
238
239	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
240	line=""
241	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
242	while read line
243	do
244	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
245	then
246	local_username=`echo $line \| cut -d" " -s -f2`
247	fi
248	done < $tmp_mbuild
249
250
251	if [[ "$local_username" = "" ]]
252	then
253	printf "\n +++ no user name found in configuration file"
254	printf "\n for local host \"$local_host\" "
255	locat=config_file; exit
256	fi
257
258
259	# LOKALEN QUELLTEXTPFAD ERMITTELN.
260	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
261	# VEREINBART WURDE.
262	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
263	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
264	line=""
265	grep "%" $config_file > $tmp_mbuild
266	while read line
267	do
268	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
269	then
270	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
271	value=`echo $line \| cut -d" " -s -f2`
272	eval export $var=\$value
273	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
274	fi
275	done < $tmp_mbuild
276
277	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
278	line=""
279	grep "%source_path" $config_file > $tmp_mbuild
280	while read line
281	do
282	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
283	then
284	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
285	then
286	global_source_path=`echo $line \| cut -d" " -s -f2`
287	fi
288	fi
289	done < $tmp_mbuild
290
291	line=""
292	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
293	while read line
294	do
295	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
296	then
297	local_source_path=`echo $line \| cut -d" " -s -f2`
298	fi
299	done < $tmp_mbuild
300
301	if [[ "$local_source_path" = "" ]]
302	then
303	if [[ "$global_source_path" != "" ]]
304	then
305	local_source_path=$global_source_path
306	else
307	printf "\n +++ no source path found in configuration file"
308	printf "\n for local host \"$local_host\" "
309	printf "\n please set \"\%source_path\" in configuration file"
310	locat=config_file; exit
311	fi
312	fi
313	eval local_source_path=$local_source_path
314	eval local_source_path=$local_source_path
315
316
317
318	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
319	line=""
320	grep "%depository_path" $config_file > $tmp_mbuild
321	while read line
322	do
323	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
324	then
325	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
326	then
327	global_depository_path=`echo $line \| cut -d" " -s -f2`
328	fi
329	fi
330	done < $tmp_mbuild
331
332
333
334	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
335	# VEREINBART WURDE
336	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
337	then
338	printf "\n +++ no main program or more than one main program defined"
339	printf "\n in configuration file"
340	locat=configuration; exit
341	else
342	line=`grep "%mainprog" $config_file`
343	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
344	then
345	printf "\n +++ no main program defined in configuration file"
346	locat=configuration; exit
347	fi
348	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
349	fi
350
351
352
353	# MAKEFILE vorhanden
354	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
355	if [[ ! -f $makefile ]]
356	then
357	printf "\n +++ makefile: "
358	printf "\n $makefile"
359	printf "\n does not exist"
360	locat=makefile; exit
361	fi
362
363
364	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
365	calltime=$(date)
366	printf "\n"
367	printf "#------------------------------------------------------------------------# \n"
368	printf "\| $version$calltime \| \n"
369	printf "\| \| \n"
370	column1="called on:"; column2=$local_host_real_name
371	printf "\| $column1$column2 \| \n"
372	column1="local username:"; column2=$local_username
373	printf "\| $column1$column2 \| \n"
374	column1="local IP-addres:"; column2=$local_addres
375	printf "\| $column1$column2 \| \n"
376	column1="config file:"; column2=$config_file
377	printf "\| $column1$column2 \| \n"
378	column1="makefile:"; column2=$makefile
379	printf "\| $column1$column2 \| \n"
380	column1="local source path:"; column2=$local_source_path
381	printf "\| $column1$column2 \| \n"
382	printf "#------------------------------------------------------------------------# \n"
383
384	# printf "\| \| \n"
385
386
387	if [[ $compile_utility_programs = false ]]
388	then
389
390	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
391	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
392	cd $local_source_path
393	printf "\n\n *** tar of makefile and source files in $local_source_path"
394	tar -cf ${mainprog}_sources.tar Makefile *.$suf
395	printf "\n"
396
397	fi
398
399
400
401	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
402	if [[ $host = all ]]
403	then
404	printf "\n *** updates will be made for ALL hosts found in"
405	printf "\n the configuration file"
406	else
407	printf "\n *** update will be made for host \"$host\" "
408	fi
409
410	if [[ $silent = false ]]
411	then
412	answer=dummy
413	printf "\n\n"
414	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
415	do
416	printf " >>> continue (y/n) ? "
417	read answer
418	done
419	if [[ $answer = n \|\| $answer = N ]]
420	then
421	locat=user_abort; exit
422	fi
423	fi
424
425
426
427
428	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
429	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
430	printf "\n *** scanning configuration file for host(s) ..."
431
432	grep %fopts $config_file > $tmp_mbuild
433	while read line
434	do
435	# KOMMENTARZEILEN UEBERSPRINGEN
436	[[ $(echo $line \| cut -c1) = "#" ]] && continue
437	(( ihost = ihost + 1 ))
438	hostline[$ihost]="$line"
439	done < $tmp_mbuild
440
441
442	while (( ih < ihost ))
443	do
444
445	(( ih = ih + 1 ))
446
447	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
448	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
449	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
450	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
451	remote_host=`echo $remote_host_string \| cut -d" " -f1`
452	if [[ $host != all ]]
453	then
454	[[ $remote_host != $host ]] && continue
455	fi
456	host_found=true
457	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
458	if [[ $condition1 = $remote_host ]]
459	then
460	condition1=""
461	else
462	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
463	fi
464
465	netcdf_inc=""
466	netcdf_lib=""
467
468	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
469	case $remote_host in
470	(lcmuk) remote_addres=130.75.105.2;;
471	(lcsgib) remote_addres=130.73.232.102;;
472	(lcsgih) remote_addres=130.75.4.103;;
473	(lctit) remote_addres=172.17.75.161;;
474	(lcxt4) remote_addres=129.177.20.113;;
475	(decalpha) remote_addres=165.132.26.56;;
476	(ibmb) remote_addres=130.73.230.10;;
477	(ibmh) remote_addres=130.75.4.10;;
478	(ibms) remote_addres=150.183.5.101;;
479	(ibmy) remote_addres=165.132.26.58;;
480	(nech) remote_addres=136.172.44.192;;
481	(neck) remote_addres=133.5.178.11;;
482	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
483	(*) if [[ $local_host != $remote_host ]]
484	then
485	printf "\n +++ remote host \"$remote_host\" unknown";
486	printf "\n please inform S. Raasch!"
487	fi;;
488	esac
489
490
491	# REMOTE-USERNAMEN ERMITTELN
492	line=""
493	found=false
494	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
495	while read line1
496	do
497
498	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
499	then
500	line="$line1"
501	fi
502
503	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
504	then
505	remote_username=`echo $line \| cut -d" " -s -f2`
506	found=true
507	fi
508
509	done < $tmp_mbuild
510
511	if [[ $found = false ]]
512	then
513	printf "\n +++ no remote username found in configuration file"
514	printf "\n for \"$remote_host_string\" "
515	locat=config_file; exit
516	fi
517
518
519	# REMOTE-QUELLTEXTPFAD ERMITTELN
520	line=""
521	remote_source_path=""
522	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
523	while read line1
524	do
525
526	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
527	then
528	line="$line1"
529	fi
530
531	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
532	then
533	remote_source_path=`echo $line \| cut -d" " -s -f2`
534	fi
535
536	done < $tmp_mbuild
537
538	if [[ "$remote_source_path" = "" ]]
539	then
540	if [[ "$global_source_path" != "" ]]
541	then
542	remote_source_path=$global_source_path
543	else
544	printf "\n +++ no source path found in configuration file"
545	printf "\n for \"$remote_host_string\" "
546	locat=config_file; exit
547	fi
548	fi
549
550	remote_ud=${remote_source_path}/../UTIL
551	remote_ud=$(eval echo $remote_ud)
552
553
554	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
555	remote_md=""
556	line=""
557	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
558	while read line1
559	do
560
561	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
562	then
563	line="$line1"
564	fi
565
566	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
567	then
568	remote_md=`echo $line \| cut -d" " -s -f2`
569	fi
570
571	done < $tmp_mbuild
572
573	if [[ "$remote_md" = "" ]]
574	then
575	if [[ "$global_depository_path" != "" ]]
576	then
577	remote_md=$global_depository_path
578	else
579	printf "\n +++ no depository path found in configuration file"
580	printf "\n for \"$remote_host_string\" "
581	printf "\n please set \"\%depository_path\" in configuration file"
582	locat=config_file; exit
583	fi
584	fi
585
586	remote_md=$(eval echo $remote_md)
587	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
588	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
589
590
591	# COMPILERNAMEN ERMITTELN
592	line=""
593	found=false
594	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
595	while read line1
596	do
597
598	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
599	then
600	line="$line1"
601	fi
602
603	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
604	then
605	compiler_name=`echo $line \| cut -d" " -s -f2`
606	found=true
607	fi
608
609	done < $tmp_mbuild
610
611	if [[ $found = false ]]
612	then
613	printf "\n +++ no compiler name found in configuration file"
614	printf "\n for \"$remote_host_string\" "
615	locat=config_file; exit
616	fi
617
618
619	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
620	# SERIELLER COMPILERNAME ERMITTELT WERDEN
621	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
622	then
623	line=""
624	found=false
625	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
626	while read line1
627	do
628
629	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
630	then
631	line="$line1"
632	fi
633
634	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
635	then
636	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
637	found=true
638	fi
639
640	done < $tmp_mbuild
641
642	if [[ $found = false ]]
643	then
644	printf "\n +++ no serial compiler name found in configuration file"
645	printf "\n for \"$remote_host_string\" "
646	locat=config_file; exit
647	fi
648	else
649	compiler_name_ser=$compiler_name
650	fi
651
652
653
654	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
655	line=""
656	found=false
657	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
658	while read line1
659	do
660
661	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
662	then
663	line="$line1"
664	fi
665
666	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
667	then
668	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
669	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
670	found=true
671	fi
672
673	done < $tmp_mbuild
674
675	if [[ $found = false ]]
676	then
677	printf "\n +++ no preprocessor options found in configuration file"
678	printf "\n for \"$remote_host_string\" "
679	locat=config_file; exit
680	fi
681
682
683	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
684	for string in $remote_host_string
685	do
686	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
687	then
688	cpp_options="$cpp_options -D__lc "
689	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
690	then
691	cpp_options="${cpp_options},-D__ibm"
692	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
693	then
694	cpp_options="${cpp_options} -D__nec"
695	else
696	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
697	then
698	cpp_options="${cpp_options},-D__$string"
699	else
700	cpp_options="$cpp_options -D__$string "
701	fi
702	fi
703	done
704
705
706
707	# NETCDF-OPTIONEN ERMITTELN
708	line=""
709	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
710	while read line1
711	do
712
713	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
714	then
715	line="$line1"
716	fi
717
718	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
719	then
720	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
721	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
722	fi
723
724	done < $tmp_mbuild
725
726	line=""
727	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
728	while read line1
729	do
730
731	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
732	then
733	line="$line1"
734	fi
735
736	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
737	then
738	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
739	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
740	fi
741
742	done < $tmp_mbuild
743
744
745
746	# COMPILEROPTIONEN ERMITTELN
747	line=""
748	found=false
749	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
750	while read line1
751	do
752
753	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
754	then
755	line="$line1"
756	fi
757
758	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
759	then
760	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
761	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
762	found=true
763
764	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
765	compiler_options="$compiler_options $netcdf_inc"
766	fi
767
768	done < $tmp_mbuild
769
770	if [[ $found = false ]]
771	then
772	printf "\n +++ no compiler options found in configuration file"
773	printf "\n for \"$remote_host_string\" "
774	locat=config_file; exit
775	fi
776
777
778
779	# MPI LIBRARY ERMITTELN
780	line=""
781	found=false
782	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
783	while read line1
784	do
785
786	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
787	then
788	line="$line1"
789	fi
790
791	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
792	then
793	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
794	mpilib=`echo $line \| cut -d" " -s -f2`
795	found=true
796	fi
797
798	done < $tmp_mbuild
799
800	[[ $found = false ]] && mpilib=mpt
801
802
803
804
805	# LADER-OPTIONEN ERMITTELN
806	line=""
807	found=false
808	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
809	while read line1
810	do
811
812	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
813	then
814	line="$line1"
815	fi
816
817	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
818	then
819	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
820	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
821	found=true
822
823	# NETCDF-LIBRARY HINZUFUEGEN
824	loader_options="$loader_options $netcdf_lib"
825	fi
826
827	done < $tmp_mbuild
828
829	if [[ $found = false ]]
830	then
831	printf "\n +++ no loader options found in configuration file"
832	printf "\n for \"$remote_host_string\" "
833	locat=config_file; exit
834	fi
835
836
837	printf "\n\n#------------------------------------------------------------------------# \n"
838	if [[ $remote_host = $local_host ]]
839	then
840	column1="remote_host:"; column2="$remote_host (= local host!)"
841	else
842	column1="remote_host:"; column2=$remote_host
843	fi
844	printf "\| $column1$column2 \| \n"
845	printf "\| \| \n"
846	column1="conditions:"; column2="$condition1 $condition2"
847	printf "\| $column1$column2 \| \n"
848	column1="make depository:"; column2=$remote_md
849	printf "\| $column1$column2 \| \n"
850	line=$(echo "$remote_md" \| cut -c51-)
851	while [[ "$line" != "" ]]
852	do
853	column1=""
854	column2=$line
855	printf "\| $column1$column2 \| \n"
856	line=$(echo "$line" \| cut -c51-)
857	done
858	if [[ $compile_utility_programs = true ]]
859	then
860	column1="utility directory:"; column2=$remote_ud
861	printf "\| $column1$column2 \| \n"
862	fi
863	column1="username:"; column2=$remote_username
864	printf "\| $column1$column2 \| \n"
865	column1="addres:"; column2=$remote_addres
866	printf "\| $column1$column2 \| \n"
867	column1="compiler:"; column2=$compiler_name
868	printf "\| $column1$column2 \| \n"
869	if [[ $compile_utility_programs = true ]]
870	then
871	column1="serial compiler:"; column2=$compiler_name_ser
872	printf "\| $column1$column2 \| \n"
873	fi
874	column1="cpp options:"; column2=$cpp_options
875	printf "\| $column1$column2 \| \n"
876	line=$(echo "$cpp_options" \| cut -c51-)
877	while [[ "$line" != "" ]]
878	do
879	column1=""
880	column2=$line
881	printf "\| $column1$column2 \| \n"
882	line=$(echo "$line" \| cut -c51-)
883	done
884	column1="compiler options:"; column2=$compiler_options
885	printf "\| $column1$column2 \| \n"
886	line=$(echo "$compiler_options" \| cut -c51-)
887	while [[ "$line" != "" ]]
888	do
889	column1=""
890	column2=$line
891	printf "\| $column1$column2 \| \n"
892	line=$(echo "$line" \| cut -c51-)
893	done
894	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
895	then
896	column1="mpi library:"; column2=$mpilib
897	printf "\| $column1$column2 \| \n"
898	fi
899	column1="loader options:"; column2=$loader_options
900	printf "\| $column1$column2 \| \n"
901	line=$(echo "$loader_options" \| cut -c51-)
902	while [[ "$line" != "" ]]
903	do
904	column1=""
905	column2=$line
906	printf "\| $column1$column2 \| \n"
907	line=$(echo "$line" \| cut -c51-)
908	done
909	printf "#------------------------------------------------------------------------# \n"
910
911	if [[ $silent = false ]]
912	then
913	answer=dummy
914	printf "\n\n"
915	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
916	do
917	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
918	read answer
919	done
920	if [[ $answer = a \|\| $answer = A ]]
921	then
922	locat=user_abort; exit
923	fi
924	if [[ $answer = c \|\| $answer = C ]]
925	then
926	silent=false
927	fi
928	if [[ $answer = s \|\| $answer = S ]]
929	then
930	continue
931	fi
932	fi
933
934
935	if [[ $remote_mode = batch ]]
936	then
937
938	# BATCH-JOB PARAMETER SETZEN
939	case $remote_host in
940	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
941	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
942	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
943	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
944	esac
945
946
947	# BATCH-JOB ZUSAMMENSTELLEN
948	printf "\n *** creating batch-job for remote host"
949	echo " " > mbuild_job
950
951	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
952	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
953	if [[ $remote_host = t3ej2 ]]
954	then
955	echo "set +vx" >> mbuild_job
956	echo ". .profile" >> mbuild_job
957	echo "set -x" >> mbuild_job
958	fi
959
960	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
961	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
962	then
963	echo "module list" >> mbuild_job
964	fi
965
966
967	# WECHSEL IN TEMPORAERES VERZEICHNIS
968	echo "cd ${remote_md}" >> mbuild_job
969
970
971	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
972	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
973	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
974
975
976	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
977	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
978
979
980	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
981	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
982
983
984	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
985	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
986	echo "chmod u+w *" >> mbuild_job
987
988	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
989	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
990
991
992	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
993	echo "make clean" >> mbuild_job
994	echo "rm ${mainprog}_sources.tar" >> mbuild_job
995	echo "rm *.f90 Makefile" >> mbuild_job
996
997
998
999	# JOB MITTELS SUBJOB STARTEN
1000	printf "\n *** sending batch job to remote host"
1001	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1002
1003
1004	# JOBFILE LOESCHEN
1005	# rm aljob
1006
1007	else
1008
1009	if [[ $remote_host != $local_host ]]
1010	then
1011
1012	if [[ $compile_utility_programs = false ]]
1013	then
1014
1015	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1016	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1017	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1018	if [[ $remote_host != lctit ]]
1019	then
1020	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1021	else
1022	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1023	# MIT SSH, DESHALB AUFRUF PER PIPE
1024	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1025	fi
1026	if [[ $local_host = decalpha ]]
1027	then
1028	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1029	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1030	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1031	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1032	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1033	else
1034	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1035	fi
1036
1037
1038
1039	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1040	echo " *** untar previous update on remote host, if existing"
1041	if [[ $remote_host != lctit ]]
1042	then
1043	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1044	else
1045	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1046	# MIT SSH, DESHALB AUFRUF PER PIPE
1047	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1048	fi
1049
1050
1051	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1052	echo " *** untar actual sources on remote host"
1053	if [[ $remote_host != lctit ]]
1054	then
1055	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1056	else
1057	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1058	# MIT SSH, DESHALB AUFRUF PER PIPE
1059	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1060	fi
1061
1062
1063	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1064	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1065	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1066	# Z.B. DIE PFADE ZUM COMPILER)
1067	echo " *** execute \"make\" on remote host"
1068
1069	if [[ $remote_host = nech ]]
1070	then
1071	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1072	else
1073	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1074	fi
1075
1076	if [[ $remote_host = t3eh ]]
1077	then
1078
1079	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1080
1081	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1082	then
1083
1084	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1085
1086	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1087	then
1088
1089	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1090
1091	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1092	then
1093
1094	print ". /usr/share/modules/init/bash; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1095	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1096	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1097
1098	elif [[ $remote_host = lctit ]]
1099	then
1100
1101	echo " " > ${remote_host}_last_make_protokoll
1102	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1103	do
1104	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1105	done
1106
1107	elif [[ $remote_host = lcxt4 ]]
1108	then
1109
1110	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1111
1112	else
1113
1114	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1115
1116	fi
1117
1118	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1119	then
1120	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1121	if [[ $silent = false ]]
1122	then
1123	answer=dummy
1124	printf "\n"
1125	while [[ "$answer" != c && "$answer" != k ]]
1126	do
1127	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1128	read answer
1129	if [[ "$answer" = l ]]
1130	then
1131	more ${remote_host}_last_make_protokoll
1132	fi
1133	done
1134	if [[ $answer = k ]]
1135	then
1136	locat=user_abort; exit
1137	fi
1138	fi
1139	fi
1140
1141
1142
1143	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1144	printf "\n *** tar update on remote host ..."
1145	if [[ $remote_host != lctit ]]
1146	then
1147	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1148	else
1149	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1150	# MIT SSH, DESHALB AUFRUF PER PIPE
1151	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1152	fi
1153
1154
1155	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1156	# printf "\n *** \"make clean\" on remote host ..."
1157	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1158	# printf "\n"
1159
1160
1161
1162
1163	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1164	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1165	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1166	elif [[ $compile_utility_programs = true ]]
1167	then
1168
1169	printf "\n\n"
1170	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1171	cd ${local_source_path}/../SCRIPTS
1172
1173	if [[ $remote_host != lctit ]]
1174	then
1175	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1176	else
1177	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1178	# MIT SSH, DESHALB AUFRUF PER PIPE
1179	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1180	fi
1181
1182	# KOPIEREN DER SCRIPTE
1183	if [[ $local_host = decalpha ]]
1184	then
1185	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1186	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1187	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1188	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1189	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1190	else
1191	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1192	fi
1193
1194	cd - > /dev/null
1195	cd ${local_source_path}/../UTIL
1196
1197
1198	# KOPIEREN DER UTILITY-PROGRAMME
1199	if [[ $local_host = decalpha ]]
1200	then
1201	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1202	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1203	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1204	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1205	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1206	else
1207	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1208	fi
1209
1210
1211
1212	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1213	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1214	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1215	# Z.B. DIE PFADE ZUM COMPILER)
1216	echo " *** execute \"make\" on remote host"
1217
1218	if [[ $remote_host = nech ]]
1219	then
1220	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1221	else
1222	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1223	fi
1224
1225	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1226	then
1227
1228	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1229
1230	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1231	then
1232
1233	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1234
1235	elif [[ $remote_host = lctit ]]
1236	then
1237
1238	echo " " > ${remote_host}_last_make_protokoll
1239	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1240	do
1241	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1242	done
1243
1244	else
1245
1246	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1247
1248	fi
1249
1250	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1251
1252	rm -rf ${remote_host}_last_make_protokoll
1253
1254	else
1255
1256	if [[ $compile_utility_programs = false ]]
1257	then
1258
1259	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1260	eval remote_md=$remote_md
1261	if [[ ! -d $remote_md ]]
1262	then
1263	if mkdir $remote_md
1264	then
1265	printf "\n\n *** directory for make depository:"
1266	printf "\n $remote_md"
1267	printf "\n was created\n"
1268	else
1269	printf "\n +++ directory for make depository:"
1270	printf "\n $remote_md"
1271	printf "\n cannot be created"
1272	locat=local_depository_path; exit
1273	fi
1274	fi
1275
1276	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1277	echo " "
1278	echo " *** updating sources in $remote_md"
1279	cd $remote_md
1280	cp $local_source_path/${mainprog}_sources.tar .
1281	tar xf ${mainprog}_sources.tar
1282
1283	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1284	echo " "
1285	echo " *** execute \"make\" on local host"
1286
1287	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1288
1289	if [[ $? != 0 ]]
1290	then
1291	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1292	if [[ $silent = false ]]
1293	then
1294	answer=dummy
1295	printf "\n"
1296	while [[ "$answer" != c && "$answer" != k ]]
1297	do
1298	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1299	read answer
1300	if [[ "$answer" = l ]]
1301	then
1302	more ${remote_host}_last_make_protokoll
1303	fi
1304	done
1305	if [[ $answer = k ]]
1306	then
1307	locat=user_abort; exit
1308	fi
1309	fi
1310	fi
1311
1312
1313	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1314	printf "\n *** tar update on local host ..."
1315	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1316
1317
1318	# COMPILE THE UTILITY PROGRAMS
1319	elif [[ $compile_utility_programs = true ]]
1320	then
1321	printf "\n\n"
1322	echo " *** compiling the utility programs ..."
1323	cd ${local_source_path}/../UTIL
1324	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1325	cd - > /dev/null
1326	fi
1327
1328	fi
1329
1330	fi
1331	done
1332
1333
1334	if [[ $host_found = false ]]
1335	then
1336	if [[ $host = all ]]
1337	then
1338	printf "\n +++ no hosts found in configuration file"
1339	else
1340	printf "\n +++ host \"$host\" not found in configuration file"
1341	fi
1342	locat=config_file; exit
1343	fi
1344
1345
1346
1347	# ABSCHLIESSENDE ARBEITEN
1348	rm -f hosts_found_in_config_file
1349

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |