Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 133

Last change on this file since 133 was 116, checked in by raasch, 17 years ago
further preliminary updates concerning particle sorting and documentation
Property svn:keywords set to `Rev`
File size: 53.8 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 54 2007-03-08 00:00:02Z raasch $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90	# from configuration file
91	# host identifier (local_host) is read from config file
92	# 10/10/07 - Siggi - bugfix: handling of comment lines
93
94
95
96	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
97	compile_utility_programs=false
98	config_file=.mrun.config
99	fimm=false
100	host=all
101	host_found=false
102	ibm_hb_done=false
103	lcmuk_done=false
104	locat=normal
105	makefile=""
106	remote_mode=interactive
107	scirocco=false
108	silent=false
109	suf=f90
110	update=false
111	working_directory=`pwd`
112
113	typeset -i ih ihost=0
114
115	typeset -R30 calltime
116	typeset -L20 column1
117	typeset -L50 column2
118	typeset -L70 column3
119	typeset -L40 version="MBUILD 2.0 Rev$Rev: 116 $"
120
121	# FEHLERBEHANDLUNG
122	# BEI EXIT:
123	trap 'rm -rf $working_directory/tmp_mbuild
124	if [[ $locat != normal ]]
125	then
126	printf "\n\n +++ mbuild killed \n\n"
127	else
128	printf "\n\n *** mbuild finished \n\n"
129	fi' exit
130
131
132	# BEI TERMINAL-BREAK:
133	trap 'rm -rf $working_directory/tmp_mbuild
134	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
135	exit
136	' 2
137
138
139
140	# SHELLSCRIPT-OPTIONEN EINLESEN
141	while getopts :c:h:m:rs:u option
142	do
143	case $option in
144	(c) config_file=$OPTARG;;
145	(h) host=$OPTARG;;
146	(m) makefile=$OPTARG;;
147	(r) remote_mode=batch;;
148	(s) suf=$OPTARG;;
149	(u) compile_utility_programs=true;;
150	(\?) printf "\n +++ unknown option $OPTARG \n";
151	locat=parameter; exit;;
152	esac
153	done
154
155
156
157	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
158	if [[ $remote_mode = batch ]]
159	then
160	printf "\n +++ sorry, batch mode does not work! \n"
161	locat=parameter; exit
162	fi
163
164
165
166	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
167	if [[ ! -f $config_file ]]
168	then
169	printf "\n +++ configuration file: "
170	printf "\n $config_file"
171	printf "\n does not exist"
172	locat=configuration; exit
173	fi
174
175
176
177	# LOKALEN RECHNER ERMITTELN
178	local_host_real_name=$(hostname)
179	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
180
181
182
183	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
184	line=""
185	grep "%host_identifier" $config_file > tmp_mbuild
186	while read line
187	do
188	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
189	then
190	HOSTNAME=`echo $line \| cut -d" " -s -f2`
191	host_identifier=`echo $line \| cut -d" " -s -f3`
192	if [[ $local_host_real_name = $HOSTNAME ]]
193	then
194	local_host=$host_identifier
195	break
196	fi
197	fi
198	done < tmp_mbuild
199
200	if [[ "$local_host" = "" ]]
201	then
202	printf "\n +++ no host identifier found in configuration file \"$config_file\""
203	printf "\n for local host \"$local_host_real_name\"."
204	printf "\n Please add line"
205	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
206	printf "\n to the configuration file."
207	locat=local_host; exit
208	fi
209
210
211
212	[[ $local_host_real_name = scirocco ]] && scirocco=true
213	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
214
215
216
217	if [[ $local_host != ibms ]]
218	then
219	config_file=$PWD/$config_file
220	else
221	config_file=`pwd`/$config_file
222	fi
223
224
225
226	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
227	line=""
228	grep " $local_host" $config_file \| grep "%remote_username" > tmp_mbuild
229	while read line
230	do
231	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
232	then
233	local_username=`echo $line \| cut -d" " -s -f2`
234	fi
235	done < tmp_mbuild
236
237
238	if [[ "$local_username" = "" ]]
239	then
240	printf "\n +++ no user name found in configuration file"
241	printf "\n for local host \"$local_host\" "
242	locat=config_file; exit
243	fi
244
245
246	# LOKALEN QUELLTEXTPFAD ERMITTELN.
247	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
248	# VEREINBART WURDE.
249	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
250	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
251	line=""
252	grep "%" $config_file > tmp_mbuild
253	while read line
254	do
255	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
256	then
257	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
258	value=`echo $line \| cut -d" " -s -f2`
259	eval export $var=\$value
260	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
261	fi
262	done < tmp_mbuild
263
264	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
265	line=""
266	grep "%source_path" $config_file > tmp_mbuild
267	while read line
268	do
269	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
270	then
271	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
272	then
273	global_source_path=`echo $line \| cut -d" " -s -f2`
274	fi
275	fi
276	done < tmp_mbuild
277
278	line=""
279	grep " $local_host" $config_file \| grep "%source_path" > tmp_mbuild
280	while read line
281	do
282	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
283	then
284	local_source_path=`echo $line \| cut -d" " -s -f2`
285	fi
286	done < tmp_mbuild
287
288	if [[ "$local_source_path" = "" ]]
289	then
290	if [[ "$global_source_path" != "" ]]
291	then
292	local_source_path=$global_source_path
293	else
294	printf "\n +++ no source path found in configuration file"
295	printf "\n for local host \"$local_host\" "
296	printf "\n please set \"\%source_path\" in configuration file"
297	locat=config_file; exit
298	fi
299	fi
300	eval local_source_path=$local_source_path
301	eval local_source_path=$local_source_path
302
303
304	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
305	line=""
306	grep "%depository_path" $config_file > tmp_mbuild
307	while read line
308	do
309	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
310	then
311	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
312	then
313	global_depository_path=`echo $line \| cut -d" " -s -f2`
314	fi
315	fi
316	done < tmp_mbuild
317
318	line=""
319	grep " $local_host" $config_file \| grep "%depository_path" > tmp_mbuild
320	while read line
321	do
322	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
323	then
324	local_depository_path=`echo $line \| cut -d" " -s -f2`
325	fi
326	done < tmp_mbuild
327
328	if [[ "$local_depository_path" = "" ]]
329	then
330	if [[ "$global_depository_path" != "" ]]
331	then
332	local_depository_path=$global_depository_path
333	else
334	printf "\n +++ no depository path found in configuration file"
335	printf "\n for local host \"$local_host\" "
336	printf "\n please set \"\%depository_path\" in configuration file"
337	locat=config_file; exit
338	fi
339	fi
340	eval local_depository_path=$local_depository_path
341	eval local_depository_path=$local_depository_path
342
343
344
345	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
346	# VEREINBART WURDE
347	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
348	then
349	printf "\n +++ no main program or more than one main program defined"
350	printf "\n in configuration file"
351	locat=configuration; exit
352	else
353	line=`grep "%mainprog" $config_file`
354	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
355	then
356	printf "\n +++ no main program defined in configuration file"
357	locat=configuration; exit
358	fi
359	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
360	fi
361
362
363
364	# MAKEFILE vorhanden
365	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
366	if [[ ! -f $makefile ]]
367	then
368	printf "\n +++ makefile: "
369	printf "\n $makefile"
370	printf "\n does not exist"
371	locat=makefile; exit
372	fi
373
374
375	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
376	calltime=$(date)
377	printf "\n"
378	printf "#------------------------------------------------------------------------# \n"
379	printf "\| $version$calltime \| \n"
380	printf "\| \| \n"
381	column1="called on:"; column2=$local_host_real_name
382	printf "\| $column1$column2 \| \n"
383	column1="local username:"; column2=$local_username
384	printf "\| $column1$column2 \| \n"
385	column1="local IP-addres:"; column2=$local_addres
386	printf "\| $column1$column2 \| \n"
387	column1="config file:"; column2=$config_file
388	printf "\| $column1$column2 \| \n"
389	column1="makefile:"; column2=$makefile
390	printf "\| $column1$column2 \| \n"
391	column1="local source path:"; column2=$local_source_path
392	printf "\| $column1$column2 \| \n"
393	column1="make depository:"; column2=$local_depository_path
394	printf "\| $column1$column2 \| \n"
395	printf "#------------------------------------------------------------------------# \n"
396
397	# printf "\| \| \n"
398
399
400	if [[ $compile_utility_programs = false ]]
401	then
402
403	cd $local_source_path
404
405
406	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
407	source_code_files=`ls -1 *.$suf`
408
409
410
411	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
412	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
413	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
414	if [[ ! -d $local_depository_path ]]
415	then
416	if mkdir $local_depository_path
417	then
418	printf "\n\n *** directory for make depository:"
419	printf "\n $local_depository_path"
420	printf "\n was created\n"
421
422	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
423	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
424	printf "\n *** makefile and source code files are copied to"
425	printf "\n $local_depository_path\n"
426	printf "\n copying makefile \"$makefile\" ..."
427	cp -p $makefile $local_depository_path/Makefile
428
429	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
430	# SEIN
431	for filename in $source_code_files
432	do
433	if [[ $(grep -c $filename $makefile) = 0 ]]
434	then
435	printf "\n +++ source code file:"
436	printf "\n $filename"
437	printf "\n is not listed in makefile"
438	locat=makefile; exit
439	else
440	printf "\n copying source code file \"$filename\" ..."
441	cp -p $filename $local_depository_path
442	fi
443	done
444	printf "\n"
445	else
446	printf "\n +++ directory for make depository:"
447	printf "\n $local_depository_path"
448	printf "\n cannot be created"
449	locat=local_depository_path; exit
450	fi
451	else
452
453	printf "\n *** checking file status ..."
454
455	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
456	if [[ $makefile -nt $local_depository_path/Makefile ]]
457	then
458	printf "\n *** update of \"$makefile\" "
459	cp -f -p $makefile $local_depository_path/Makefile
460	update=true
461
462	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
463	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
464	cd $local_depository_path
465	source_code_files_in_depository=`ls -1 *.$suf`
466	for filename in $source_code_files_in_depository
467	do
468	if [[ $(grep -c $filename Makefile) = 0 ]]
469	then
470	printf "\n *** source code file in \"$local_depository_path\":"
471	printf "\n $filename"
472	printf "\n is not listed in makefile"
473	if [[ $silent = false ]]
474	then
475	answer=dummy
476	printf "\n\n"
477	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
478	do
479	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
480	read answer
481	done
482	if [[ $answer = y \|\| $answer = Y ]]
483	then
484	base=`echo $filename \| cut -d. -f2`
485	rm -f $filename
486	rm -f ${base}.o ${base}.mod
487	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
488	else
489	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
490	fi
491	fi
492	fi
493	done
494	cd - > /dev/null 2>&1
495
496	elif [[ $local_depository_path/Makefile -nt $makefile ]]
497	then
498	printf "\n *** makefile in depository is newer than"
499	printf "\n \"$makefile\" "
500	if [[ $silent = false ]]
501	then
502	answer=dummy
503	printf "\n\n"
504	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
505	do
506	printf " >>> update \"$makefile\" (y/n) ? "
507	read answer
508	done
509	if [[ $answer = y \|\| $answer = Y ]]
510	then
511	cp -f -p $local_depository_path/Makefile $makefile
512	printf "\n *** \"$makefile\" updated"
513	else
514	printf "\n *** \"$makefile\" not updated"
515	fi
516	fi
517	fi
518
519	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
520	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
521	for filename in $source_code_files
522	do
523	if [[ $(grep -c $filename $makefile) = 0 ]]
524	then
525	printf "\n +++ source code file:"
526	printf "\n $filename"
527	printf "\n is not listed in makefile"
528	locat=makefile; exit
529	else
530	if [[ ! -f $local_depository_path/$filename ]]
531	then
532	cp -p $filename $local_depository_path
533	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
534	fi
535	if [[ $filename -nt $local_depository_path/$filename ]]
536	then
537	printf "\n *** update of source code file \"$filename\" "
538	cp -f -p $filename $local_depository_path
539	update=true
540	fi
541	fi
542	done
543
544
545	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
546	# ODER EVTL. NEUEREN DATUMS SIND
547	cd $local_depository_path
548	source_code_files_in_depository=`ls -1 *.$suf`
549	cd - > /dev/null 2>&1
550	for filename in $source_code_files_in_depository
551	do
552	if [[ ! -f $filename ]]
553	then
554	printf "\n *** source code file \"$filename\" does not exist in current directory"
555	if [[ $silent = false ]]
556	then
557	answer=dummy
558	printf "\n\n"
559	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
560	do
561	printf " >>> create \"$filename\" in current directory (y/n) ? "
562	read answer
563	done
564	if [[ $answer = y \|\| $answer = Y ]]
565	then
566	cp -p $local_depository_path/$filename $filename
567	printf "\n *** source code file \"$filename\" created in current directory"
568	else
569	printf "\n *** source code file \"$filename\" not created in current directory"
570	fi
571	fi
572	elif [[ $local_depository_path/$filename -nt $filename ]]
573	then
574	ls -al $local_depository_path/$filename
575	ls -al $filename
576	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
577	if [[ $silent = false ]]
578	then
579	answer=dummy
580	printf "\n\n"
581	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
582	do
583	printf " >>> update \"$filename\" in current directory (y/n) ? "
584	read answer
585	done
586	if [[ $answer = y \|\| $answer = Y ]]
587	then
588	cp -f -p $local_depository_path/$filename $filename
589	printf "\n *** source code file \"$filename\" updated in current directory"
590	else
591	printf "\n *** source code file \"$filename\" not updated in current directory"
592	fi
593	fi
594	fi
595	done
596
597	if [[ $update = false ]]
598	then
599	printf "\n *** no updates necessary in \"$local_depository_path\" "
600	if [[ $silent = false ]]
601	then
602	answer=dummy
603	printf "\n\n"
604	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
605	do
606	printf " >>> continue with updates on remote hosts (y/n) ? "
607	read answer
608	done
609	if [[ $answer = n \|\| $answer = N ]]
610	then
611	locat=user_abort; exit
612	fi
613	fi
614	fi
615	fi
616
617
618
619	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
620	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
621	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
622	printf "\n\n *** tar of makefile and source files in depository ..."
623	cd $local_depository_path
624	chmod u+w Makefile *.$suf
625	tar -cf ${mainprog}_sources.tar Makefile *.$suf
626	printf "\n"
627
628	fi
629
630
631
632	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
633	if [[ $host = all ]]
634	then
635	printf "\n *** updates will be made for ALL hosts found in"
636	printf "\n the configuration file"
637	else
638	printf "\n *** update will be made for host \"$host\" "
639	fi
640
641	if [[ $silent = false ]]
642	then
643	answer=dummy
644	printf "\n\n"
645	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
646	do
647	printf " >>> continue (y/n) ? "
648	read answer
649	done
650	if [[ $answer = n \|\| $answer = N ]]
651	then
652	locat=user_abort; exit
653	fi
654	fi
655
656
657
658
659	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
660	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
661	printf "\n *** scanning configuration file for host(s) ..."
662
663	grep %fopts $config_file > tmp_mbuild
664	while read line
665	do
666	# KOMMENTARZEILEN UEBERSPRINGEN
667	[[ $(echo $line \| cut -c1) = "#" ]] && continue
668	(( ihost = ihost + 1 ))
669	hostline[$ihost]="$line"
670	done < tmp_mbuild
671
672
673	while (( ih < ihost ))
674	do
675
676	(( ih = ih + 1 ))
677
678	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
679	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
680	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
681	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
682	remote_host=`echo $remote_host_string \| cut -d" " -f1`
683	if [[ $host != all ]]
684	then
685	[[ $remote_host != $host ]] && continue
686	fi
687	host_found=true
688	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
689	if [[ $condition1 = $remote_host ]]
690	then
691	condition1=""
692	else
693	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
694	fi
695
696	netcdf_inc=""
697	netcdf_lib=""
698
699	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
700	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
701	then
702	if [[ $ibm_hb_done = true ]]
703	then
704	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
705	printf "\n been carried out on one of the HLRN machines\n"
706	continue
707	fi
708	fi
709
710	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
711	if [[ $remote_host = lcmuk ]]
712	then
713	if [[ $lcmuk_done = true ]]
714	then
715	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
716	printf "\n been carried out on this host\n"
717	continue
718	fi
719	fi
720
721
722	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
723	case $remote_host in
724	(lcmuk) remote_addres=130.75.105.2;;
725	(lctit) remote_addres=172.17.75.161;;
726	(decalpha) remote_addres=165.132.26.56;;
727	(ibmb) remote_addres=130.73.230.10;;
728	(ibmh) remote_addres=130.75.4.10;;
729	(ibms) remote_addres=150.183.5.101;;
730	(ibmy) remote_addres=165.132.26.58;;
731	(nech) remote_addres=136.172.44.192;;
732	(neck) remote_addres=133.5.178.11;;
733	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
734	(*) if [[ $local_host != $remote_host ]]
735	then
736	printf "\n +++ remote host \"$remote_host\" unknown";
737	printf "\n please inform S. Raasch!"
738	fi;;
739	esac
740
741
742	# REMOTE-USERNAMEN ERMITTELN
743	line=""
744	found=false
745	grep "$remote_host_string" $config_file \| grep "%remote_username" > tmp_mbuild
746	while read line1
747	do
748
749	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
750	then
751	line="$line1"
752	fi
753
754	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
755	then
756	remote_username=`echo $line \| cut -d" " -s -f2`
757	found=true
758	fi
759
760	done < tmp_mbuild
761
762	if [[ $found = false ]]
763	then
764	printf "\n +++ no remote username found in configuration file"
765	printf "\n for \"$remote_host_string\" "
766	locat=config_file; exit
767	fi
768
769
770	# REMOTE-QUELLTEXTPFAD ERMITTELN
771	line=""
772	remote_source_path=""
773	grep "$remote_host_string" $config_file \| grep "%source_path" > tmp_mbuild
774	while read line1
775	do
776
777	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
778	then
779	line="$line1"
780	fi
781
782	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
783	then
784	remote_source_path=`echo $line \| cut -d" " -s -f2`
785	fi
786
787	done < tmp_mbuild
788
789	if [[ "$remote_source_path" = "" ]]
790	then
791	if [[ "$global_source_path" != "" ]]
792	then
793	remote_source_path=$global_source_path
794	else
795	printf "\n +++ no source path found in configuration file"
796	printf "\n for \"$remote_host_string\" "
797	locat=config_file; exit
798	fi
799	fi
800
801	remote_ud=${remote_source_path}/../UTIL
802	remote_ud=$(eval echo $remote_ud)
803
804
805	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
806	remote_md=""
807	line=""
808	grep "$remote_host_string" $config_file \| grep "%depository_path" > tmp_mbuild
809	while read line1
810	do
811
812	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
813	then
814	line="$line1"
815	fi
816
817	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
818	then
819	remote_md=`echo $line \| cut -d" " -s -f2`
820	fi
821
822	done < tmp_mbuild
823
824	if [[ "$remote_md" = "" ]]
825	then
826	if [[ "$global_depository_path" != "" ]]
827	then
828	remote_md=$global_depository_path
829	else
830	printf "\n +++ no depository path found in configuration file"
831	printf "\n for \"$remote_host_string\" "
832	printf "\n please set \"\%depository_path\" in configuration file"
833	locat=config_file; exit
834	fi
835	fi
836
837	remote_md=$(eval echo $remote_md)
838
839
840	# COMPILERNAMEN ERMITTELN
841	line=""
842	found=false
843	grep "$remote_host_string" $config_file \| grep "%compiler_name " > tmp_mbuild
844	while read line1
845	do
846
847	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
848	then
849	line="$line1"
850	fi
851
852	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
853	then
854	compiler_name=`echo $line \| cut -d" " -s -f2`
855	found=true
856	fi
857
858	done < tmp_mbuild
859
860	if [[ $found = false ]]
861	then
862	printf "\n +++ no compiler name found in configuration file"
863	printf "\n for \"$remote_host_string\" "
864	locat=config_file; exit
865	fi
866
867
868	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
869	# SERIELLER COMPILERNAME ERMITTELT WERDEN
870	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
871	then
872	line=""
873	found=false
874	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > tmp_mbuild
875	while read line1
876	do
877
878	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
879	then
880	line="$line1"
881	fi
882
883	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
884	then
885	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
886	found=true
887	fi
888
889	done < tmp_mbuild
890
891	if [[ $found = false ]]
892	then
893	printf "\n +++ no serial compiler name found in configuration file"
894	printf "\n for \"$remote_host_string\" "
895	locat=config_file; exit
896	fi
897	else
898	compiler_name_ser=$compiler_name
899	fi
900
901
902
903	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
904	line=""
905	found=false
906	grep "$remote_host_string" $config_file \| grep "%cpp_options" > tmp_mbuild
907	while read line1
908	do
909
910	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
911	then
912	line="$line1"
913	fi
914
915	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
916	then
917	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
918	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
919	found=true
920	fi
921
922	done < tmp_mbuild
923
924	if [[ $found = false ]]
925	then
926	printf "\n +++ no preprocessor options found in configuration file"
927	printf "\n for \"$remote_host_string\" "
928	locat=config_file; exit
929	fi
930
931
932	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
933	for string in $remote_host_string
934	do
935	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
936	then
937	cpp_options="$cpp_options -D__lc "
938	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
939	then
940	cpp_options="${cpp_options},-D__ibm"
941	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
942	then
943	cpp_options="${cpp_options} -D__nec"
944	else
945	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
946	then
947	cpp_options="${cpp_options},-D__$string"
948	else
949	cpp_options="$cpp_options -D__$string "
950	fi
951	fi
952	done
953
954
955
956	# NETCDF-OPTIONEN ERMITTELN
957	line=""
958	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > tmp_mbuild
959	while read line1
960	do
961
962	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
963	then
964	line="$line1"
965	fi
966
967	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
968	then
969	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
970	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
971	fi
972
973	done < tmp_mbuild
974
975	line=""
976	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > tmp_mbuild
977	while read line1
978	do
979
980	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
981	then
982	line="$line1"
983	fi
984
985	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
986	then
987	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
988	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
989	fi
990
991	done < tmp_mbuild
992
993
994
995	# COMPILEROPTIONEN ERMITTELN
996	line=""
997	found=false
998	grep "$remote_host_string" $config_file \| grep "%fopts" > tmp_mbuild
999	while read line1
1000	do
1001
1002	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1003	then
1004	line="$line1"
1005	fi
1006
1007	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1008	then
1009	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
1010	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
1011	found=true
1012
1013	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
1014	compiler_options="$compiler_options $netcdf_inc"
1015	fi
1016
1017	done < tmp_mbuild
1018
1019	if [[ $found = false ]]
1020	then
1021	printf "\n +++ no compiler options found in configuration file"
1022	printf "\n for \"$remote_host_string\" "
1023	locat=config_file; exit
1024	fi
1025
1026
1027
1028	# LADER-OPTIONEN ERMITTELN
1029	line=""
1030	found=false
1031	grep "$remote_host_string" $config_file \| grep "%lopts" > tmp_mbuild
1032	while read line1
1033	do
1034
1035	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1036	then
1037	line="$line1"
1038	fi
1039
1040	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1041	then
1042	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
1043	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
1044	found=true
1045
1046	# NETCDF-LIBRARY HINZUFUEGEN
1047	loader_options="$loader_options $netcdf_lib"
1048	fi
1049
1050	done < tmp_mbuild
1051
1052	if [[ $found = false ]]
1053	then
1054	printf "\n +++ no loader options found in configuration file"
1055	printf "\n for \"$remote_host_string\" "
1056	locat=config_file; exit
1057	fi
1058
1059
1060	printf "\n\n#------------------------------------------------------------------------# \n"
1061	if [[ $remote_host = $local_host ]]
1062	then
1063	column1="remote_host:"; column2="$remote_host (= local host!)"
1064	else
1065	column1="remote_host:"; column2=$remote_host
1066	fi
1067	printf "\| $column1$column2 \| \n"
1068	printf "\| \| \n"
1069	column1="conditions:"; column2="$condition1 $condition2"
1070	printf "\| $column1$column2 \| \n"
1071	column1="make depository:"; column2=$remote_md
1072	printf "\| $column1$column2 \| \n"
1073	if [[ $compile_utility_programs = true ]]
1074	then
1075	column1="utility directory:"; column2=$remote_ud
1076	printf "\| $column1$column2 \| \n"
1077	fi
1078	column1="username:"; column2=$remote_username
1079	printf "\| $column1$column2 \| \n"
1080	column1="addres:"; column2=$remote_addres
1081	printf "\| $column1$column2 \| \n"
1082	column1="compiler:"; column2=$compiler_name
1083	printf "\| $column1$column2 \| \n"
1084	if [[ $compile_utility_programs = true ]]
1085	then
1086	column1="serial compiler:"; column2=$compiler_name_ser
1087	printf "\| $column1$column2 \| \n"
1088	fi
1089	column1="cpp options:"; column2=$cpp_options
1090	printf "\| $column1$column2 \| \n"
1091	line=$(echo "$cpp_options" \| cut -c51-)
1092	while [[ "$line" != "" ]]
1093	do
1094	column1=""
1095	column2=$line
1096	printf "\| $column1$column2 \| \n"
1097	line=$(echo "$line" \| cut -c51-)
1098	done
1099	column1="compiler options:"; column2=$compiler_options
1100	printf "\| $column1$column2 \| \n"
1101	line=$(echo "$compiler_options" \| cut -c51-)
1102	while [[ "$line" != "" ]]
1103	do
1104	column1=""
1105	column2=$line
1106	printf "\| $column1$column2 \| \n"
1107	line=$(echo "$line" \| cut -c51-)
1108	done
1109	column1="loader options:"; column2=$loader_options
1110	printf "\| $column1$column2 \| \n"
1111	line=$(echo "$loader_options" \| cut -c51-)
1112	while [[ "$line" != "" ]]
1113	do
1114	column1=""
1115	column2=$line
1116	printf "\| $column1$column2 \| \n"
1117	line=$(echo "$line" \| cut -c51-)
1118	done
1119	printf "#------------------------------------------------------------------------# \n"
1120
1121	if [[ $silent = false ]]
1122	then
1123	answer=dummy
1124	printf "\n\n"
1125	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1126	do
1127	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1128	read answer
1129	done
1130	if [[ $answer = a \|\| $answer = A ]]
1131	then
1132	locat=user_abort; exit
1133	fi
1134	if [[ $answer = c \|\| $answer = C ]]
1135	then
1136	silent=false
1137	fi
1138	if [[ $answer = s \|\| $answer = S ]]
1139	then
1140	continue
1141	fi
1142	fi
1143
1144
1145	if [[ $remote_mode = batch ]]
1146	then
1147
1148	# BATCH-JOB PARAMETER SETZEN
1149	case $remote_host in
1150	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1151	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
1152	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1153	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1154	esac
1155
1156
1157	# BATCH-JOB ZUSAMMENSTELLEN
1158	printf "\n *** creating batch-job for remote host"
1159	echo " " > mbuild_job
1160
1161	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1162	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1163	if [[ $remote_host = t3ej2 ]]
1164	then
1165	echo "set +vx" >> mbuild_job
1166	echo ". .profile" >> mbuild_job
1167	echo "set -x" >> mbuild_job
1168	fi
1169
1170	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1171	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
1172	then
1173	echo "module list" >> mbuild_job
1174	fi
1175
1176
1177	# WECHSEL IN TEMPORAERES VERZEICHNIS
1178	echo "cd ${remote_md}" >> mbuild_job
1179
1180
1181	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1182	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
1183	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
1184
1185
1186	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1187	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
1188
1189
1190	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1191	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
1192
1193
1194	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1195	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
1196	echo "chmod u+w *" >> mbuild_job
1197
1198	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1199	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
1200
1201
1202	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1203	echo "make clean" >> mbuild_job
1204	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1205	echo "rm *.f90 Makefile" >> mbuild_job
1206
1207
1208
1209	# JOB MITTELS SUBJOB STARTEN
1210	printf "\n *** sending batch job to remote host"
1211	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1212
1213
1214	# JOBFILE LOESCHEN
1215	# rm aljob
1216
1217	else
1218
1219	if [[ $remote_host != $local_host ]]
1220	then
1221
1222	if [[ $compile_utility_programs = false ]]
1223	then
1224
1225	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1226	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1227	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1228	if [[ $remote_host != lctit ]]
1229	then
1230	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1231	else
1232	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1233	# MIT SSH, DESHALB AUFRUF PER PIPE
1234	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1235	fi
1236	if [[ $local_host = decalpha ]]
1237	then
1238	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1239	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1240	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1241	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1242	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1243	else
1244	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1245	fi
1246
1247
1248
1249	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1250	echo " *** untar previous update on remote host, if existing"
1251	if [[ $remote_host != lctit ]]
1252	then
1253	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1254	else
1255	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1256	# MIT SSH, DESHALB AUFRUF PER PIPE
1257	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1258	fi
1259
1260
1261	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1262	echo " *** untar actual sources on remote host"
1263	if [[ $remote_host != lctit ]]
1264	then
1265	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1266	else
1267	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1268	# MIT SSH, DESHALB AUFRUF PER PIPE
1269	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1270	fi
1271
1272
1273	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1274	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1275	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1276	# Z.B. DIE PFADE ZUM COMPILER)
1277	echo " *** execute \"make\" on remote host"
1278
1279	if [[ $remote_host = nech ]]
1280	then
1281	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1282	else
1283	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1284	fi
1285
1286	if [[ $remote_host = t3eh ]]
1287	then
1288
1289	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1290
1291	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1292	then
1293
1294	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1295
1296	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1297	then
1298
1299	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1300
1301	elif [[ $remote_host = lctit ]]
1302	then
1303
1304	echo " " > ${remote_host}_last_make_protokoll
1305	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1306	do
1307	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1308	done
1309
1310	else
1311
1312	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1313
1314	fi
1315
1316	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1317	then
1318	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1319	if [[ $silent = false ]]
1320	then
1321	answer=dummy
1322	printf "\n"
1323	while [[ "$answer" != c && "$answer" != k ]]
1324	do
1325	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1326	read answer
1327	if [[ "$answer" = l ]]
1328	then
1329	more ${remote_host}_last_make_protokoll
1330	fi
1331	done
1332	if [[ $answer = k ]]
1333	then
1334	locat=user_abort; exit
1335	fi
1336	fi
1337	fi
1338
1339
1340
1341	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1342	printf "\n *** tar update on remote host ..."
1343	if [[ $remote_host != lctit ]]
1344	then
1345	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod"
1346	else
1347	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1348	# MIT SSH, DESHALB AUFRUF PER PIPE
1349	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1350	fi
1351
1352
1353	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1354	# printf "\n *** \"make clean\" on remote host ..."
1355	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1356	# printf "\n"
1357
1358
1359
1360
1361	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1362	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1363	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1364	elif [[ $compile_utility_programs = true ]]
1365	then
1366
1367	printf "\n\n"
1368	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1369	cd ${local_source_path}/../SCRIPTS
1370
1371	if [[ $remote_host != lctit ]]
1372	then
1373	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1374	else
1375	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1376	# MIT SSH, DESHALB AUFRUF PER PIPE
1377	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1378	fi
1379
1380	# KOPIEREN DER SCRIPTE
1381	if [[ $local_host = decalpha ]]
1382	then
1383	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1384	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1385	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1386	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1387	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1388	else
1389	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1390	fi
1391
1392	cd - > /dev/null
1393	cd ${local_source_path}/../UTIL
1394
1395
1396	# KOPIEREN DER UTILITY-PROGRAMME
1397	if [[ $local_host = decalpha ]]
1398	then
1399	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1400	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1401	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1402	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1403	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1404	else
1405	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1406	fi
1407
1408
1409
1410	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1411	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1412	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1413	# Z.B. DIE PFADE ZUM COMPILER)
1414	echo " *** execute \"make\" on remote host"
1415
1416	if [[ $remote_host = nech ]]
1417	then
1418	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1419	else
1420	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1421	fi
1422
1423	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1424	then
1425
1426	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1427
1428	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1429	then
1430
1431	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1432
1433	elif [[ $remote_host = lctit ]]
1434	then
1435
1436	echo " " > ${remote_host}_last_make_protokoll
1437	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1438	do
1439	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1440	done
1441
1442	else
1443
1444	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1445
1446	fi
1447
1448	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1449
1450	rm -rf ${remote_host}_last_make_protokoll
1451
1452	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1453	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
1454
1455	else
1456
1457	if [[ $compile_utility_programs = false ]]
1458	then
1459
1460	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1461	echo " "
1462	echo " *** execute \"make\" on local host"
1463
1464	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1465
1466	if [[ $? != 0 ]]
1467	then
1468	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1469	if [[ $silent = false ]]
1470	then
1471	answer=dummy
1472	printf "\n"
1473	while [[ "$answer" != c && "$answer" != k ]]
1474	do
1475	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1476	read answer
1477	if [[ "$answer" = l ]]
1478	then
1479	more ${remote_host}_last_make_protokoll
1480	fi
1481	done
1482	if [[ $answer = k ]]
1483	then
1484	locat=user_abort; exit
1485	fi
1486	fi
1487	fi
1488
1489
1490	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1491	printf "\n *** tar update on local host ..."
1492	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1493
1494
1495	# COMPILE THE UTILITY PROGRAMS
1496	elif [[ $compile_utility_programs = true ]]
1497	then
1498	printf "\n\n"
1499	echo " *** compiling the utility programs ..."
1500	cd ${local_source_path}/../UTIL
1501	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1502	cd - > /dev/null
1503	fi
1504
1505
1506	# NUR EINMAL AUF LCMUK UEBERSETZEN
1507	[[ $remote_host = lcmuk ]] && lcmuk_done=true
1508
1509	fi
1510
1511	fi
1512	done
1513
1514
1515	if [[ $host_found = false ]]
1516	then
1517	if [[ $host = all ]]
1518	then
1519	printf "\n +++ no hosts found in configuration file"
1520	else
1521	printf "\n +++ host \"$host\" not found in configuration file"
1522	fi
1523	locat=config_file; exit
1524	fi
1525
1526
1527
1528	# ABSCHLIESSENDE ARBEITEN
1529	rm -f hosts_found_in_config_file
1530

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |