Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 892

Last change on this file since 892 was 892, checked in by maronga, 13 years ago
bugfixes in parameter file check, adapted for lcxe6 (was lcxt4), new mrun.config parameter %login_init_cmd introduced
Property svn:keywords set to `Id Rev`
File size: 53.1 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 892 2012-05-02 13:51:44Z maronga $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119	# 04/03/11 - BjornM- re-adjustments for lcxt4
120	# 06/03/11 - Siggi - adjustments for ibmkisti
121	# 03/04/11 - Micha - added lckordi
122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
126	# check program) has been added to the utility branch),
127	# modfified the compilation of mrungui
128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
129	# multiple localhost branches
130	# 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
131	# corrected
132	# 02/05/12 - Bjoern - lcxt4 is now lcxe6, adjustments for lcxe6,
133	# bugfixes for the parameter file check, initial
134	# commands on ssh calls sourced out to .mrun.config
135
136
137	# VARIABLE DECLARATIONS + DEFAULT VALUES
138	compile_utility_programs=false
139	config_file=.mrun.config
140	fimm=false
141	host=all
142	host_found=false
143	locat=normal
144	makefile=""
145	module_calls=""
146	util_compiled_localhost=false
147	scirocco=false
148	silent=false
149	suf=f90
150	update=false
151	working_directory=`pwd`
152
153	typeset -i ih ihost=0
154
155	typeset -R30 calltime
156	typeset -L20 column1
157	typeset -L50 column2
158	typeset -L70 column3
159	typeset -L40 version="MBUILD 2.1 Rev$Rev: 892 $"
160
161	# ERROR HANDLING
162	# IN CASE OF EXIT:
163	trap 'rm -rf $working_directory/tmp_mbuild
164	if [[ $locat != normal ]]
165	then
166	printf "\n\n +++ mbuild killed \n\n"
167	else
168	printf "\n\n *** mbuild finished \n\n"
169	fi' exit
170
171
172	# IN CASE OF TERMINAL-BREAK:
173	trap 'rm -rf $working_directory/tmp_mbuild
174	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
175	exit
176	' 2
177
178
179	tmp_mbuild=${working_directory}/tmp_mbuild
180
181	# READ SHELLSCRIPT-OPTIONS
182	while getopts :c:h:m:s:u option
183	do
184	case $option in
185	(c) config_file=$OPTARG;;
186	(h) host=$OPTARG;;
187	(m) makefile=$OPTARG;;
188	(s) suf=$OPTARG;;
189	(u) compile_utility_programs=true;;
190	(\?) printf "\n +++ unknown option $OPTARG \n";
191	locat=parameter; exit;;
192	esac
193	done
194
195
196
197	# CHECK, IF CONFIGURATION-FILE EXISTS
198	if [[ ! -f $config_file ]]
199	then
200	printf "\n +++ configuration file: "
201	printf "\n $config_file"
202	printf "\n does not exist"
203	locat=configuration; exit
204	fi
205
206
207
208	# DETERMINE THE LOCAL HOST
209	local_host_real_name=$(hostname)
210	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
211
212
213
214	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
215	line=""
216	grep "%host_identifier" $config_file > $tmp_mbuild
217	while read line
218	do
219	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
220	then
221	HOSTNAME=`echo $line \| cut -d" " -s -f2`
222	host_identifier=`echo $line \| cut -d" " -s -f3`
223	if [[ $local_host_real_name = $HOSTNAME ]]
224	then
225	local_host=$host_identifier
226	break
227	fi
228	fi
229	done < $tmp_mbuild
230
231	if [[ "$local_host" = "" ]]
232	then
233	printf "\n +++ no host identifier found in configuration file \"$config_file\""
234	printf "\n for local host \"$local_host_real_name\"."
235	printf "\n Please add line"
236	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
237	printf "\n to the configuration file."
238	locat=local_host; exit
239	fi
240
241
242
243	[[ $local_host_real_name = scirocco ]] && scirocco=true
244	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
245
246
247
248	if [[ $local_host != ibms ]]
249	then
250	config_file=$PWD/$config_file
251	else
252	config_file=`pwd`/$config_file
253	fi
254
255
256
257	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
258	line=""
259	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
260	while read line
261	do
262	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
263	then
264	local_username=`echo $line \| cut -d" " -s -f2`
265	fi
266	done < $tmp_mbuild
267
268
269	if [[ "$local_username" = "" ]]
270	then
271	printf "\n +++ no user name found in configuration file"
272	printf "\n for local host \"$local_host\" "
273	locat=config_file; exit
274	fi
275
276
277	# DETERMINE LOCAL SOURCE-CODE PATH.
278	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
279	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
280	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
281	line=""
282	grep "%" $config_file > $tmp_mbuild
283	while read line
284	do
285	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
286	then
287	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
288	value=`echo $line \| cut -d" " -s -f2`
289	eval export $var=\$value
290	fi
291	done < $tmp_mbuild
292
293	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
294	line=""
295	grep "%source_path" $config_file > $tmp_mbuild
296	while read line
297	do
298	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
299	then
300	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
301	then
302	global_source_path=`echo $line \| cut -d" " -s -f2`
303	fi
304	fi
305	done < $tmp_mbuild
306
307	line=""
308	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
309	while read line
310	do
311	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
312	then
313	local_source_path=`echo $line \| cut -d" " -s -f2`
314	fi
315	done < $tmp_mbuild
316
317	if [[ "$local_source_path" = "" ]]
318	then
319	if [[ "$global_source_path" != "" ]]
320	then
321	local_source_path=$global_source_path
322	else
323	printf "\n +++ no source path found in configuration file"
324	printf "\n for local host \"$local_host\" "
325	printf "\n please set \"\%source_path\" in configuration file"
326	locat=config_file; exit
327	fi
328	fi
329	eval local_source_path=$local_source_path
330	eval local_source_path=$local_source_path
331
332
333
334	# DETERMINE GLOBAL DEPOSITORY-PATH
335	line=""
336	grep "%depository_path" $config_file > $tmp_mbuild
337	while read line
338	do
339	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
340	then
341	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
342	then
343	global_depository_path=`echo $line \| cut -d" " -s -f2`
344	fi
345	fi
346	done < $tmp_mbuild
347
348	if [[ $found = false ]]
349	then
350	printf "\n +++ no \%depository_path found in"
351	printf "\n $config_file"
352	locat=depository_path; exit
353	fi
354
355	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
356	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
357	then
358	printf "\n +++ no main program or more than one main program defined"
359	printf "\n in configuration file"
360	locat=configuration; exit
361	else
362	line=`grep "%mainprog" $config_file`
363	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
364	then
365	printf "\n +++ no main program defined in configuration file"
366	locat=configuration; exit
367	fi
368	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
369	fi
370
371
372
373	# CHECK IF MAKEFILE EXITS
374	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
375	if [[ ! -f $makefile ]]
376	then
377	printf "\n +++ makefile: "
378	printf "\n $makefile"
379	printf "\n does not exist"
380	locat=makefile; exit
381	fi
382
383
384	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
385	calltime=$(date)
386	printf "\n"
387	printf "#------------------------------------------------------------------------# \n"
388	printf "\| $version$calltime \| \n"
389	printf "\| \| \n"
390	column1="called on:"; column2=$local_host_real_name
391	printf "\| $column1$column2 \| \n"
392	column1="local username:"; column2=$local_username
393	printf "\| $column1$column2 \| \n"
394	column1="local IP-addres:"; column2=$local_addres
395	printf "\| $column1$column2 \| \n"
396	column1="config file:"; column2=$config_file
397	printf "\| $column1$column2 \| \n"
398	column1="makefile:"; column2=$makefile
399	printf "\| $column1$column2 \| \n"
400	column1="local source path:"; column2=$local_source_path
401	printf "\| $column1$column2 \| \n"
402	printf "#------------------------------------------------------------------------# \n"
403
404	# printf "\| \| \n"
405
406
407	if [[ $compile_utility_programs = false ]]
408	then
409
410	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
411	# WITH OVERWRITING FILES ON THE REMOTE HOST
412	cd $local_source_path
413	printf "\n\n *** tar of makefile and source files in $local_source_path"
414	tar -cf ${mainprog}_sources.tar Makefile *.$suf
415	printf "\n"
416
417	else
418	cd $local_source_path
419	printf "\n\n *** tar of makefile and source files in $local_source_path"
420
421	cat Makefile_check\|while read line
422	do
423	line=$(echo $line\|grep RCS)
424	if [[ $line == "RCS" ]]
425	then
426	line=$(echo $line\|sed 's/RCS = //g')
427	break
428	fi
429	done
430
431	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
432	printf "\n"
433	fi
434
435
436
437	# GET CONFIRMATION TO CONTINUE
438	if [[ $host = all ]]
439	then
440	printf "\n *** updates will be made for ALL hosts found in"
441	printf "\n the configuration file"
442	else
443	printf "\n *** update will be made for host \"$host\" "
444	fi
445
446	if [[ $silent = false ]]
447	then
448	answer=dummy
449	printf "\n\n"
450	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
451	do
452	printf " >>> continue (y/n) ? "
453	read answer
454	done
455	if [[ $answer = n \|\| $answer = N ]]
456	then
457	locat=user_abort; exit
458	fi
459	fi
460
461
462
463
464	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
465	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
466	printf "\n *** scanning configuration file for host(s) ..."
467
468	grep %fopts $config_file > $tmp_mbuild
469	while read line
470	do
471	# KOMMENTARZEILEN UEBERSPRINGEN
472	[[ $(echo $line \| cut -c1) = "#" ]] && continue
473	(( ihost = ihost + 1 ))
474	hostline[$ihost]="$line"
475	done < $tmp_mbuild
476
477
478	while (( ih < ihost ))
479	do
480
481	(( ih = ih + 1 ))
482
483	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
484	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
485	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
486	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
487	remote_host=`echo $remote_host_string \| cut -d" " -f1`
488	if [[ $host != all ]]
489	then
490	[[ $remote_host != $host ]] && continue
491	fi
492	host_found=true
493	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
494	if [[ $condition1 = $remote_host ]]
495	then
496	condition1=""
497	else
498	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
499	fi
500
501	modules=""
502	netcdf_inc=""
503	netcdf_lib=""
504	make_options=""
505
506	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
507	case $remote_host in
508	(lckordi) remote_adress=210.219.61.8;;
509	(lcmuk) remote_addres=130.75.105.2;;
510	(lcrte) remote_addres=133.5.185.60;;
511	(lcsgib) remote_addres=130.73.232.102;;
512	(lcsgih) remote_addres=130.75.4.101;;
513	(lck) remote_addres=165.132.26.61;;
514	(lctit) remote_addres=10.1.6.170;;
515	(lcxe6) remote_addres=129.177.20.113;;
516	(lcxt5m) remote_addres=193.166.211.144;;
517	(decalpha) remote_addres=165.132.26.56;;
518	(ibmh) remote_addres=136.172.40.15;;
519	(ibmkisti) remote_addres=150.183.146.24;;
520	(ibmku) remote_addres=133.5.4.129;;
521	(ibms) remote_addres=150.183.5.101;;
522	(ibmy) remote_addres=165.132.26.58;;
523	(nech) remote_addres=136.172.44.192;;
524	(neck) remote_addres=133.5.178.11;;
525	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
526	(*) if [[ $local_host != $remote_host ]]
527	then
528	printf "\n +++ remote host \"$remote_host\" unknown";
529	printf "\n please inform PALM group support!"
530	fi;;
531	esac
532
533
534	# REMOTE-USERNAMEN ERMITTELN
535	line=""
536	found=false
537	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
538	while read line1
539	do
540
541	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
542	then
543	line="$line1"
544	fi
545
546	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
547	then
548	remote_username=`echo $line \| cut -d" " -s -f2`
549	found=true
550	fi
551
552	done < $tmp_mbuild
553
554	if [[ $found = false ]]
555	then
556	printf "\n +++ no remote username found in configuration file"
557	printf "\n for \"$remote_host_string\" "
558	locat=config_file; exit
559	fi
560
561
562	# REMOTE-QUELLTEXTPFAD ERMITTELN
563	line=""
564	remote_source_path=""
565	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
566	while read line1
567	do
568
569	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
570	then
571	line="$line1"
572	fi
573
574	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
575	then
576	remote_source_path=`echo $line \| cut -d" " -s -f2`
577	fi
578
579	done < $tmp_mbuild
580
581	if [[ "$remote_source_path" = "" ]]
582	then
583	if [[ "$global_source_path" != "" ]]
584	then
585	remote_source_path=$global_source_path
586	else
587	printf "\n +++ no source path found in configuration file"
588	printf "\n for \"$remote_host_string\" "
589	locat=config_file; exit
590	fi
591	fi
592
593	remote_ud=${remote_source_path}/../UTIL
594	remote_ud=$(eval echo $remote_ud)
595
596
597	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
598	remote_md=""
599	line=""
600	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
601	while read line1
602	do
603
604	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
605	then
606	line="$line1"
607	fi
608
609	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
610	then
611	remote_md=`echo $line \| cut -d" " -s -f2`
612	fi
613
614	done < $tmp_mbuild
615
616	if [[ "$remote_md" = "" ]]
617	then
618	if [[ "$global_depository_path" != "" ]]
619	then
620	remote_md=$global_depository_path
621	else
622	printf "\n +++ no depository path found in configuration file"
623	printf "\n for \"$remote_host_string\" "
624	printf "\n please set \"\%depository_path\" in configuration file"
625	locat=config_file; exit
626	fi
627	fi
628
629	remote_md=$(eval echo $remote_md)
630	block=""
631	[[ "$condition1" != "" ]] && block=_$condition1
632	[[ "$condition2" != "" ]] && block=${block}_$condition2
633	remote_md=${remote_md}$block
634
635
636	# COMPILERNAMEN ERMITTELN
637	line=""
638	found=false
639	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
640	while read line1
641	do
642
643	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
644	then
645	line="$line1"
646	fi
647
648	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
649	then
650	compiler_name=`echo $line \| cut -d" " -s -f2`
651	found=true
652	fi
653
654	done < $tmp_mbuild
655
656	if [[ $found = false ]]
657	then
658	printf "\n +++ no compiler name found in configuration file"
659	printf "\n for \"$remote_host_string\" "
660	locat=config_file; exit
661	fi
662
663
664	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
665	# SERIELLER COMPILERNAME ERMITTELT WERDEN
666	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
667	then
668	line=""
669	found=false
670	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
671	while read line1
672	do
673
674	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
675	then
676	line="$line1"
677	fi
678
679	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
680	then
681	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
682	found=true
683	fi
684
685	done < $tmp_mbuild
686
687	if [[ $found = false ]]
688	then
689	printf "\n +++ no serial compiler name found in configuration file"
690	printf "\n for \"$remote_host_string\" "
691	locat=config_file; exit
692	fi
693	else
694	compiler_name_ser=$compiler_name
695	fi
696
697
698
699	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
700	line=""
701	found=false
702	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
703	while read line1
704	do
705
706	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
707	then
708	line="$line1"
709	fi
710
711	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
712	then
713	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
714	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
715	found=true
716	fi
717
718	done < $tmp_mbuild
719
720	if [[ $found = false ]]
721	then
722	printf "\n +++ no preprocessor options found in configuration file"
723	printf "\n for \"$remote_host_string\" "
724	locat=config_file; exit
725	fi
726
727
728	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
729	for string in $remote_host_string
730	do
731	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
732	then
733	cpp_options="$cpp_options -D__lc "
734	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
735	then
736	cpp_options="${cpp_options},-D__ibm"
737	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
738	then
739	cpp_options="${cpp_options} -D__nec"
740	else
741	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
742	then
743	cpp_options="${cpp_options},-D__$string"
744	else
745	cpp_options="$cpp_options -D__$string "
746	fi
747	fi
748	done
749
750
751
752	# NETCDF-OPTIONEN ERMITTELN
753	line=""
754	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
755	while read line1
756	do
757
758	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
759	then
760	line="$line1"
761	fi
762
763	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
764	then
765	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
766	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
767	fi
768
769	done < $tmp_mbuild
770
771	line=""
772	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
773	while read line1
774	do
775
776	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
777	then
778	line="$line1"
779	fi
780
781	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
782	then
783	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
784	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
785	fi
786
787	done < $tmp_mbuild
788
789
790
791	# get make options
792	line=""
793	found=false
794	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
795	while read line1
796	do
797
798	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
799	then
800	line="$line1"
801	fi
802
803	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
804	then
805	# remove colons from directive string
806	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
807
808	fi
809
810	done < $tmp_mbuild
811
812
813
814	# COMPILEROPTIONEN ERMITTELN
815	line=""
816	found=false
817	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
818	while read line1
819	do
820
821	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
822	then
823	line="$line1"
824	fi
825
826	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
827	then
828	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
829	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
830	found=true
831
832	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
833	compiler_options="$compiler_options $netcdf_inc"
834	fi
835
836	done < $tmp_mbuild
837
838	if [[ $found = false ]]
839	then
840	printf "\n +++ no compiler options found in configuration file"
841	printf "\n for \"$remote_host_string\" "
842	locat=config_file; exit
843	fi
844
845
846	# get login init commands, "::" is replacing a space
847	line=""
848	grep "$remote_host_string" $config_file \| grep "%login_init_cmd" > $tmp_mbuild
849	while read line1
850	do
851
852	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
853	then
854	line="$line1"
855	fi
856
857	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
858	then
859	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
860	init_cmds=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
861	fi
862	init_cmds="${init_cmds};"
863	done < $tmp_mbuild
864
865
866	# get modules to be loaded
867	line=""
868	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
869	while read line1
870	do
871
872	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
873	then
874	line="$line1"
875	fi
876
877	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
878	then
879	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
880	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
881	fi
882
883	done < $tmp_mbuild
884
885
886	# LADER-OPTIONEN ERMITTELN
887	line=""
888	found=false
889	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
890	while read line1
891	do
892
893	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
894	then
895	line="$line1"
896	fi
897
898	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
899	then
900	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
901	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
902	found=true
903
904	# NETCDF-LIBRARY HINZUFUEGEN
905	loader_options="$loader_options $netcdf_lib"
906	fi
907
908	done < $tmp_mbuild
909
910	if [[ $found = false ]]
911	then
912	printf "\n +++ no loader options found in configuration file"
913	printf "\n for \"$remote_host_string\" "
914	locat=config_file; exit
915	fi
916
917
918	printf "\n\n#------------------------------------------------------------------------# \n"
919	if [[ $remote_host = $local_host ]]
920	then
921	column1="remote_host:"; column2="$remote_host (= local host!)"
922	else
923	column1="remote_host:"; column2=$remote_host
924	fi
925	printf "\| $column1$column2 \| \n"
926	printf "\| \| \n"
927	column1="conditions:"; column2="$condition1 $condition2"
928	printf "\| $column1$column2 \| \n"
929	column1="make depository:"; column2=$remote_md
930	printf "\| $column1$column2 \| \n"
931	line=$(echo "$remote_md" \| cut -c51-)
932	while [[ "$line" != "" ]]
933	do
934	column1=""
935	column2=$line
936	printf "\| $column1$column2 \| \n"
937	line=$(echo "$line" \| cut -c51-)
938	done
939	if [[ $compile_utility_programs = true ]]
940	then
941	column1="utility directory:"; column2=$remote_ud
942	printf "\| $column1$column2 \| \n"
943	fi
944	column1="username:"; column2=$remote_username
945	printf "\| $column1$column2 \| \n"
946	column1="addres:"; column2=$remote_addres
947	printf "\| $column1$column2 \| \n"
948	column1="compiler:"; column2=$compiler_name
949	printf "\| $column1$column2 \| \n"
950	if [[ $compile_utility_programs = true ]]
951	then
952	column1="serial compiler:"; column2=$compiler_name_ser
953	printf "\| $column1$column2 \| \n"
954	fi
955	if [[ "$make_options" != "" ]]
956	then
957	column1="make options:"; column2=$make_options
958	printf "\| $column1$column2 \| \n"
959	fi
960	column1="cpp options:"; column2=$cpp_options
961	printf "\| $column1$column2 \| \n"
962	line=$(echo "$cpp_options" \| cut -c51-)
963	while [[ "$line" != "" ]]
964	do
965	column1=""
966	column2=$line
967	printf "\| $column1$column2 \| \n"
968	line=$(echo "$line" \| cut -c51-)
969	done
970	column1="compiler options:"; column2=$compiler_options
971	printf "\| $column1$column2 \| \n"
972	line=$(echo "$compiler_options" \| cut -c51-)
973	while [[ "$line" != "" ]]
974	do
975	column1=""
976	column2=$line
977	printf "\| $column1$column2 \| \n"
978	line=$(echo "$line" \| cut -c51-)
979	done
980	column1="loader options:"; column2=$loader_options
981	printf "\| $column1$column2 \| \n"
982	line=$(echo "$loader_options" \| cut -c51-)
983	while [[ "$line" != "" ]]
984	do
985	column1=""
986	column2=$line
987	printf "\| $column1$column2 \| \n"
988	line=$(echo "$line" \| cut -c51-)
989	done
990	if [[ $modules != "" ]]
991	then
992	column1="modules to be load:"; column2=$modules
993	printf "\| $column1$column2 \| \n"
994	line=$(echo "$modules" \| cut -c51-)
995	while [[ "$line" != "" ]]
996	do
997	column1=""
998	column2=$line
999	printf "\| $column1$column2 \| \n"
1000	line=$(echo "$line" \| cut -c51-)
1001	done
1002	fi
1003	printf "#------------------------------------------------------------------------# \n"
1004
1005	if [[ $silent = false ]]
1006	then
1007	answer=dummy
1008	printf "\n\n"
1009	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1010	do
1011	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1012	read answer
1013	done
1014	if [[ $answer = a \|\| $answer = A ]]
1015	then
1016	locat=user_abort; exit
1017	fi
1018	if [[ $answer = c \|\| $answer = C ]]
1019	then
1020	silent=true
1021	fi
1022	if [[ $answer = s \|\| $answer = S ]]
1023	then
1024	continue
1025	fi
1026	fi
1027
1028
1029	# make on remote host
1030	if [[ $remote_host != $local_host ]]
1031	then
1032	if [[ $compile_utility_programs = false ]]
1033	then
1034
1035	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1036	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1037	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1038	if [[ $remote_host != lctit ]]
1039	then
1040	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1041	else
1042	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1043	# MIT SSH, DESHALB AUFRUF PER PIPE
1044	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1045	fi
1046	if [[ $local_host = decalpha ]]
1047	then
1048	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1049	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1050	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1051	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1052	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1053	else
1054	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1055	fi
1056
1057
1058
1059	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1060	echo " *** untar previous update on remote host, if existing"
1061	if [[ $remote_host != lctit ]]
1062	then
1063	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1064	else
1065	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1066	# MIT SSH, DESHALB AUFRUF PER PIPE
1067	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1068	fi
1069
1070
1071	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1072	echo " *** untar actual sources on remote host"
1073	if [[ $remote_host != lctit ]]
1074	then
1075	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1076	else
1077	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1078	# MIT SSH, DESHALB AUFRUF PER PIPE
1079	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1080	fi
1081
1082
1083	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1084	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1085	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1086	# Z.B. DIE PFADE ZUM COMPILER)
1087	echo " *** execute \"make\" on remote host"
1088
1089
1090	# generate make call with make options
1091	if [[ $remote_host = nech ]]
1092	then
1093	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1094	else
1095	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1096	fi
1097
1098	# generate command to load modules, if modules are given
1099	if [[ "$modules" != "" ]]
1100	then
1101	if [[ $remote_host = lctit ]]
1102	then
1103	module_calls=". $modules"
1104	else
1105	module_calls="module load ${modules};"
1106	fi
1107
1108	# bugfix for wrong netcdf module
1109	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1110	then
1111	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1112	then
1113	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1114	fi
1115	fi
1116	else
1117	module_calls=""
1118	fi
1119
1120	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1121	then
1122
1123	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1124
1125	elif [[ $remote_host = ibmh ]]
1126	then
1127
1128	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1129
1130	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1131	then
1132	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1133	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1134
1135	elif [[ $remote_host = lctit ]]
1136	then
1137
1138	echo " " > ${remote_host}_last_make_protokoll
1139	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1140	do
1141	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1142	done
1143
1144	elif [[ $remote_host = lcxe6 ]]
1145	then
1146
1147	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1148
1149	else
1150
1151	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1152
1153	fi
1154
1155	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1156	then
1157	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1158	if [[ $silent = false ]]
1159	then
1160	answer=dummy
1161	printf "\n"
1162	while [[ "$answer" != c && "$answer" != k ]]
1163	do
1164	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1165	read answer
1166	if [[ "$answer" = l ]]
1167	then
1168	more ${remote_host}_last_make_protokoll
1169	fi
1170	done
1171	if [[ $answer = k ]]
1172	then
1173	locat=user_abort; exit
1174	fi
1175	fi
1176	fi
1177
1178
1179
1180	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1181	printf "\n *** tar update on remote host ..."
1182	if [[ $remote_host != lctit ]]
1183	then
1184	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1185	else
1186	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1187	# MIT SSH, DESHALB AUFRUF PER PIPE
1188	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1189	fi
1190
1191
1192	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1193	# printf "\n *** \"make clean\" on remote host ..."
1194	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1195	# printf "\n"
1196
1197
1198
1199
1200	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1201	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1202	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1203	elif [[ $compile_utility_programs = true ]]
1204	then
1205
1206	printf "\n\n"
1207	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1208	cd ${local_source_path}/../SCRIPTS
1209
1210	if [[ $remote_host != lctit ]]
1211	then
1212	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1213	else
1214	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1215	# MIT SSH, DESHALB AUFRUF PER PIPE
1216	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1217	fi
1218
1219	# KOPIEREN DER SCRIPTE
1220	if [[ $local_host = decalpha ]]
1221	then
1222	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1223	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1224	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1225	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1226	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1227	else
1228	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1229	fi
1230
1231	cd - > /dev/null
1232	cd ${local_source_path}/../UTIL
1233
1234
1235	# KOPIEREN DER UTILITY-PROGRAMME
1236	if [[ $local_host = decalpha ]]
1237	then
1238	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1239	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1240	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1241	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1242	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1243	else
1244	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1245	fi
1246
1247
1248
1249	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1250	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1251	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1252	# Z.B. DIE PFADE ZUM COMPILER)
1253	echo " *** execute \"make\" on remote host"
1254
1255	if [[ $remote_host = nech ]]
1256	then
1257	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1258	else
1259	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1260	fi
1261
1262	# generate command to load modules, if modules are given
1263	if [[ "$modules" != "" ]]
1264	then
1265	if [[ $remote_host = lctit ]]
1266	then
1267	module_calls=". $modules"
1268	else
1269	module_calls="module load ${modules};"
1270	fi
1271
1272	# bugfix for wrong netcdf module
1273	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1274	then
1275	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1276	then
1277	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1278	fi
1279	fi
1280	else
1281	module_calls=""
1282	fi
1283
1284
1285	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1286	then
1287
1288	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1289
1290	elif [[ $remote_host = ibmh ]]
1291	then
1292
1293	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1294
1295	elif [[ $remote_host = lctit ]]
1296	then
1297
1298	echo " " > ${remote_host}_last_make_protokoll
1299	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1300	do
1301	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1302	done
1303
1304	elif [[ $remote_host = lcxe6 ]]
1305	then
1306
1307	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1308
1309	else
1310
1311	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1312
1313	fi
1314
1315	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1316
1317	rm -rf ${remote_host}_last_make_protokoll
1318
1319	# make on local host
1320	else
1321
1322	# workaround for lcxe6
1323	if [[ $remote_host = lcxe6 ]]
1324	then
1325	$init_cmds
1326	fi
1327
1328	# first load modules, if given
1329	if [[ "$modules" != "" ]]
1330	then
1331	if [[ $remote_host = lctit ]]
1332	then
1333	. $modules
1334	else
1335	module load ${modules}
1336	fi
1337	fi
1338
1339
1340	if [[ $compile_utility_programs = false ]]
1341	then
1342
1343	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1344	eval remote_md=$remote_md
1345	if [[ ! -d $remote_md ]]
1346	then
1347	if mkdir $remote_md
1348	then
1349	printf "\n\n *** directory for make depository:"
1350	printf "\n $remote_md"
1351	printf "\n was created\n"
1352	else
1353	printf "\n +++ directory for make depository:"
1354	printf "\n $remote_md"
1355	printf "\n cannot be created"
1356	locat=local_depository_path; exit
1357	fi
1358	fi
1359
1360	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1361	echo " "
1362	echo " *** updating sources in $remote_md"
1363	cd $remote_md
1364	cp $local_source_path/${mainprog}_sources.tar .
1365	tar xf ${mainprog}_sources.tar
1366
1367	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1368	echo " "
1369	echo " *** execute \"make\" on local host"
1370
1371	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1372
1373	if [[ $? != 0 ]]
1374	then
1375	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1376	if [[ $silent = false ]]
1377	then
1378	answer=dummy
1379	printf "\n"
1380	while [[ "$answer" != c && "$answer" != k ]]
1381	do
1382	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1383	read answer
1384	if [[ "$answer" = l ]]
1385	then
1386	more ${remote_host}_last_make_protokoll
1387	fi
1388	done
1389	if [[ $answer = k ]]
1390	then
1391	locat=user_abort; exit
1392	fi
1393	fi
1394	fi
1395
1396
1397	# TAR NEW VERSION ON LOCAL HOST
1398	printf "\n *** tar update on local host ..."
1399	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1400
1401
1402	# COMPILE THE UTILITY PROGRAMS
1403	elif [[ $compile_utility_programs = true ]]
1404	then
1405	printf "\n\n"
1406	echo " *** compiling the utility programs ..."
1407	cd ${local_source_path}/../UTIL
1408
1409	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1410	touch *.f90
1411	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1412
1413	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1414	if [[ $util_compiled_localhost == false ]]
1415	then
1416	printf "\n\n"
1417	echo " *** compiling the mrun GUI"
1418	if which qmake >/dev/null; then
1419	cd mrungui
1420	touch *
1421	qmake
1422	make
1423	make clean
1424	rm Makefile
1425	cd ..
1426	else
1427	echo " +++ no qmake found. The (optional) GUI will not be compiled."
1428	fi
1429
1430	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
1431
1432	printf "\n\n"
1433	echo " *** compiling check_namelist_files ..."
1434
1435	# GET CHECK OPTIONS
1436	line=""
1437	found=false
1438	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
1439	while read line1
1440	do
1441
1442	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1443	then
1444	line="$line1"
1445	fi
1446
1447	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1448	then
1449	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING UND ALLE -D ENTFERNEN
1450	line="$line "
1451	copts_check=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g' \| sed 's/-D[^ ]* //g' \| sed 's/ -D.*//g'`
1452	found=true
1453	fi
1454
1455	done < $tmp_mbuild
1456	copts_check="$copts_check -D__check -D__parallel"
1457
1458	check_depository_path=${local_source_path}/../UTIL
1459	cd $check_depository_path
1460	mkdir check_tmp
1461	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1462	cd check_tmp
1463	tar -xf ${mainprog}_sources_check.tar
1464	rm -rf ${mainprog}_sources_check.tar
1465
1466	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check"
1467	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
1468	mv check_namelist_files.tar $check_depository_path
1469	mv check_namelist_files.x $PALM_BIN
1470	cd $check_depository_path
1471	rm -rf check_tmp
1472	util_compiled_localhost=true
1473	else
1474	cd $check_depository_path
1475	printf "\n\n"
1476	echo " *** skipped compilation of mrun GUI."
1477	printf "\n\n"
1478	echo " *** skipped compilation of check_namelist_files."
1479	fi
1480
1481	fi
1482	fi
1483	done
1484
1485
1486	if [[ $host_found = false ]]
1487	then
1488	if [[ $host = all ]]
1489	then
1490	printf "\n +++ no hosts found in configuration file"
1491	else
1492	printf "\n +++ host \"$host\" not found in configuration file"
1493	fi
1494	locat=config_file; exit
1495	fi
1496
1497
1498
1499	# FINAL WORK
1500	rm -f hosts_found_in_config_file
1501	rm -f ${local_source_path}/${mainprog}_sources_check.tar
1502

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |