Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 486

Last change on this file since 486 was 475, checked in by raasch, 15 years ago
make options can be set in configuration file; bugfix for generating serial jobs; bugfix for masked output
Property svn:keywords set to `Id Rev`
File size: 45.8 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 475 2010-02-04 02:26:16Z raasch $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90	# from configuration file
91	# host identifier (local_host) is read from config file
92	# 10/10/07 - Siggi - bugfix: handling of comment lines
93	# 18/07/08 - Siggi - adapted for lcsgih
94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95	# ({mainprog}_current_version)
96	# 02/10/08 - Siggi - adapted for lcxt4
97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
98	# remains in source directory, one depository per block
99	# (given in the config-file) is created, allways all
100	# files from the source directory are copied to the
101	# respective depository, no additional file checks are
102	# done any more (version 2.1)
103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
104	# other machines)
105	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
106	# .dvrserver.config
107	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
108	# 25/08/09 - BjornM- adapted for lck
109	# 01/12/09 - BjornM- re-adjustments for lcxt4
110	# 01/02/10 - Siggi - adjustments for lcxt5m
111	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
112	# implemented, remoted mode option -r completely
113	# removed, t3e related parts removed
114
115
116
117	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
118	compile_utility_programs=false
119	config_file=.mrun.config
120	fimm=false
121	host=all
122	host_found=false
123	locat=normal
124	makefile=""
125	scirocco=false
126	silent=false
127	suf=f90
128	update=false
129	working_directory=`pwd`
130
131	typeset -i ih ihost=0
132
133	typeset -R30 calltime
134	typeset -L20 column1
135	typeset -L50 column2
136	typeset -L70 column3
137	typeset -L40 version="MBUILD 2.1 Rev$Rev: 475 $"
138
139	# FEHLERBEHANDLUNG
140	# BEI EXIT:
141	trap 'rm -rf $working_directory/tmp_mbuild
142	if [[ $locat != normal ]]
143	then
144	printf "\n\n +++ mbuild killed \n\n"
145	else
146	printf "\n\n *** mbuild finished \n\n"
147	fi' exit
148
149
150	# BEI TERMINAL-BREAK:
151	trap 'rm -rf $working_directory/tmp_mbuild
152	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
153	exit
154	' 2
155
156
157	tmp_mbuild=${working_directory}/tmp_mbuild
158
159	# SHELLSCRIPT-OPTIONEN EINLESEN
160	while getopts :c:h:m:s:u option
161	do
162	case $option in
163	(c) config_file=$OPTARG;;
164	(h) host=$OPTARG;;
165	(m) makefile=$OPTARG;;
166	(s) suf=$OPTARG;;
167	(u) compile_utility_programs=true;;
168	(\?) printf "\n +++ unknown option $OPTARG \n";
169	locat=parameter; exit;;
170	esac
171	done
172
173
174
175	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
176	if [[ ! -f $config_file ]]
177	then
178	printf "\n +++ configuration file: "
179	printf "\n $config_file"
180	printf "\n does not exist"
181	locat=configuration; exit
182	fi
183
184
185
186	# LOKALEN RECHNER ERMITTELN
187	local_host_real_name=$(hostname)
188	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
189
190
191
192	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
193	line=""
194	grep "%host_identifier" $config_file > $tmp_mbuild
195	while read line
196	do
197	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
198	then
199	HOSTNAME=`echo $line \| cut -d" " -s -f2`
200	host_identifier=`echo $line \| cut -d" " -s -f3`
201	if [[ $local_host_real_name = $HOSTNAME ]]
202	then
203	local_host=$host_identifier
204	break
205	fi
206	fi
207	done < $tmp_mbuild
208
209	if [[ "$local_host" = "" ]]
210	then
211	printf "\n +++ no host identifier found in configuration file \"$config_file\""
212	printf "\n for local host \"$local_host_real_name\"."
213	printf "\n Please add line"
214	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
215	printf "\n to the configuration file."
216	locat=local_host; exit
217	fi
218
219
220
221	[[ $local_host_real_name = scirocco ]] && scirocco=true
222	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
223
224
225
226	if [[ $local_host != ibms ]]
227	then
228	config_file=$PWD/$config_file
229	else
230	config_file=`pwd`/$config_file
231	fi
232
233
234
235	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
236	line=""
237	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
238	while read line
239	do
240	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
241	then
242	local_username=`echo $line \| cut -d" " -s -f2`
243	fi
244	done < $tmp_mbuild
245
246
247	if [[ "$local_username" = "" ]]
248	then
249	printf "\n +++ no user name found in configuration file"
250	printf "\n for local host \"$local_host\" "
251	locat=config_file; exit
252	fi
253
254
255	# LOKALEN QUELLTEXTPFAD ERMITTELN.
256	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
257	# VEREINBART WURDE.
258	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
259	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
260	line=""
261	grep "%" $config_file > $tmp_mbuild
262	while read line
263	do
264	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
265	then
266	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
267	value=`echo $line \| cut -d" " -s -f2`
268	eval export $var=\$value
269	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
270	fi
271	done < $tmp_mbuild
272
273	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
274	line=""
275	grep "%source_path" $config_file > $tmp_mbuild
276	while read line
277	do
278	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
279	then
280	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
281	then
282	global_source_path=`echo $line \| cut -d" " -s -f2`
283	fi
284	fi
285	done < $tmp_mbuild
286
287	line=""
288	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
289	while read line
290	do
291	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
292	then
293	local_source_path=`echo $line \| cut -d" " -s -f2`
294	fi
295	done < $tmp_mbuild
296
297	if [[ "$local_source_path" = "" ]]
298	then
299	if [[ "$global_source_path" != "" ]]
300	then
301	local_source_path=$global_source_path
302	else
303	printf "\n +++ no source path found in configuration file"
304	printf "\n for local host \"$local_host\" "
305	printf "\n please set \"\%source_path\" in configuration file"
306	locat=config_file; exit
307	fi
308	fi
309	eval local_source_path=$local_source_path
310	eval local_source_path=$local_source_path
311
312
313
314	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
315	line=""
316	grep "%depository_path" $config_file > $tmp_mbuild
317	while read line
318	do
319	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
320	then
321	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
322	then
323	global_depository_path=`echo $line \| cut -d" " -s -f2`
324	fi
325	fi
326	done < $tmp_mbuild
327
328
329
330	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
331	# VEREINBART WURDE
332	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
333	then
334	printf "\n +++ no main program or more than one main program defined"
335	printf "\n in configuration file"
336	locat=configuration; exit
337	else
338	line=`grep "%mainprog" $config_file`
339	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
340	then
341	printf "\n +++ no main program defined in configuration file"
342	locat=configuration; exit
343	fi
344	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
345	fi
346
347
348
349	# MAKEFILE vorhanden
350	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
351	if [[ ! -f $makefile ]]
352	then
353	printf "\n +++ makefile: "
354	printf "\n $makefile"
355	printf "\n does not exist"
356	locat=makefile; exit
357	fi
358
359
360	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
361	calltime=$(date)
362	printf "\n"
363	printf "#------------------------------------------------------------------------# \n"
364	printf "\| $version$calltime \| \n"
365	printf "\| \| \n"
366	column1="called on:"; column2=$local_host_real_name
367	printf "\| $column1$column2 \| \n"
368	column1="local username:"; column2=$local_username
369	printf "\| $column1$column2 \| \n"
370	column1="local IP-addres:"; column2=$local_addres
371	printf "\| $column1$column2 \| \n"
372	column1="config file:"; column2=$config_file
373	printf "\| $column1$column2 \| \n"
374	column1="makefile:"; column2=$makefile
375	printf "\| $column1$column2 \| \n"
376	column1="local source path:"; column2=$local_source_path
377	printf "\| $column1$column2 \| \n"
378	printf "#------------------------------------------------------------------------# \n"
379
380	# printf "\| \| \n"
381
382
383	if [[ $compile_utility_programs = false ]]
384	then
385
386	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
387	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
388	cd $local_source_path
389	printf "\n\n *** tar of makefile and source files in $local_source_path"
390	tar -cf ${mainprog}_sources.tar Makefile *.$suf
391	printf "\n"
392
393	fi
394
395
396
397	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
398	if [[ $host = all ]]
399	then
400	printf "\n *** updates will be made for ALL hosts found in"
401	printf "\n the configuration file"
402	else
403	printf "\n *** update will be made for host \"$host\" "
404	fi
405
406	if [[ $silent = false ]]
407	then
408	answer=dummy
409	printf "\n\n"
410	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
411	do
412	printf " >>> continue (y/n) ? "
413	read answer
414	done
415	if [[ $answer = n \|\| $answer = N ]]
416	then
417	locat=user_abort; exit
418	fi
419	fi
420
421
422
423
424	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
425	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
426	printf "\n *** scanning configuration file for host(s) ..."
427
428	grep %fopts $config_file > $tmp_mbuild
429	while read line
430	do
431	# KOMMENTARZEILEN UEBERSPRINGEN
432	[[ $(echo $line \| cut -c1) = "#" ]] && continue
433	(( ihost = ihost + 1 ))
434	hostline[$ihost]="$line"
435	done < $tmp_mbuild
436
437
438	while (( ih < ihost ))
439	do
440
441	(( ih = ih + 1 ))
442
443	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
444	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
445	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
446	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
447	remote_host=`echo $remote_host_string \| cut -d" " -f1`
448	if [[ $host != all ]]
449	then
450	[[ $remote_host != $host ]] && continue
451	fi
452	host_found=true
453	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
454	if [[ $condition1 = $remote_host ]]
455	then
456	condition1=""
457	else
458	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
459	fi
460
461	netcdf_inc=""
462	netcdf_lib=""
463
464	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
465	case $remote_host in
466	(lcmuk) remote_addres=130.75.105.2;;
467	(lcsgib) remote_addres=130.73.232.102;;
468	(lcsgih) remote_addres=130.75.4.102;;
469	(lck) remote_addres=165.132.26.61;;
470	(lctit) remote_addres=172.17.75.161;;
471	(lcxt4) remote_addres=129.177.20.113;;
472	(lcxt5m) remote_addres=193.166.211.144;;
473	(decalpha) remote_addres=165.132.26.56;;
474	(ibmh) remote_addres=136.172.40.15;;
475	(ibms) remote_addres=150.183.5.101;;
476	(ibmy) remote_addres=165.132.26.58;;
477	(nech) remote_addres=136.172.44.192;;
478	(neck) remote_addres=133.5.178.11;;
479	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
480	(*) if [[ $local_host != $remote_host ]]
481	then
482	printf "\n +++ remote host \"$remote_host\" unknown";
483	printf "\n please inform S. Raasch!"
484	fi;;
485	esac
486
487
488	# REMOTE-USERNAMEN ERMITTELN
489	line=""
490	found=false
491	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
492	while read line1
493	do
494
495	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
496	then
497	line="$line1"
498	fi
499
500	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
501	then
502	remote_username=`echo $line \| cut -d" " -s -f2`
503	found=true
504	fi
505
506	done < $tmp_mbuild
507
508	if [[ $found = false ]]
509	then
510	printf "\n +++ no remote username found in configuration file"
511	printf "\n for \"$remote_host_string\" "
512	locat=config_file; exit
513	fi
514
515
516	# REMOTE-QUELLTEXTPFAD ERMITTELN
517	line=""
518	remote_source_path=""
519	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
520	while read line1
521	do
522
523	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
524	then
525	line="$line1"
526	fi
527
528	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
529	then
530	remote_source_path=`echo $line \| cut -d" " -s -f2`
531	fi
532
533	done < $tmp_mbuild
534
535	if [[ "$remote_source_path" = "" ]]
536	then
537	if [[ "$global_source_path" != "" ]]
538	then
539	remote_source_path=$global_source_path
540	else
541	printf "\n +++ no source path found in configuration file"
542	printf "\n for \"$remote_host_string\" "
543	locat=config_file; exit
544	fi
545	fi
546
547	remote_ud=${remote_source_path}/../UTIL
548	remote_ud=$(eval echo $remote_ud)
549
550
551	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
552	remote_md=""
553	line=""
554	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
555	while read line1
556	do
557
558	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
559	then
560	line="$line1"
561	fi
562
563	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
564	then
565	remote_md=`echo $line \| cut -d" " -s -f2`
566	fi
567
568	done < $tmp_mbuild
569
570	if [[ "$remote_md" = "" ]]
571	then
572	if [[ "$global_depository_path" != "" ]]
573	then
574	remote_md=$global_depository_path
575	else
576	printf "\n +++ no depository path found in configuration file"
577	printf "\n for \"$remote_host_string\" "
578	printf "\n please set \"\%depository_path\" in configuration file"
579	locat=config_file; exit
580	fi
581	fi
582
583	remote_md=$(eval echo $remote_md)
584	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
585	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
586
587
588	# COMPILERNAMEN ERMITTELN
589	line=""
590	found=false
591	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
592	while read line1
593	do
594
595	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
596	then
597	line="$line1"
598	fi
599
600	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
601	then
602	compiler_name=`echo $line \| cut -d" " -s -f2`
603	found=true
604	fi
605
606	done < $tmp_mbuild
607
608	if [[ $found = false ]]
609	then
610	printf "\n +++ no compiler name found in configuration file"
611	printf "\n for \"$remote_host_string\" "
612	locat=config_file; exit
613	fi
614
615
616	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
617	# SERIELLER COMPILERNAME ERMITTELT WERDEN
618	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
619	then
620	line=""
621	found=false
622	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
623	while read line1
624	do
625
626	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
627	then
628	line="$line1"
629	fi
630
631	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
632	then
633	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
634	found=true
635	fi
636
637	done < $tmp_mbuild
638
639	if [[ $found = false ]]
640	then
641	printf "\n +++ no serial compiler name found in configuration file"
642	printf "\n for \"$remote_host_string\" "
643	locat=config_file; exit
644	fi
645	else
646	compiler_name_ser=$compiler_name
647	fi
648
649
650
651	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
652	line=""
653	found=false
654	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
655	while read line1
656	do
657
658	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
659	then
660	line="$line1"
661	fi
662
663	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
664	then
665	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
666	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
667	found=true
668	fi
669
670	done < $tmp_mbuild
671
672	if [[ $found = false ]]
673	then
674	printf "\n +++ no preprocessor options found in configuration file"
675	printf "\n for \"$remote_host_string\" "
676	locat=config_file; exit
677	fi
678
679
680	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
681	for string in $remote_host_string
682	do
683	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
684	then
685	cpp_options="$cpp_options -D__lc "
686	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
687	then
688	cpp_options="${cpp_options},-D__ibm"
689	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
690	then
691	cpp_options="${cpp_options} -D__nec"
692	else
693	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
694	then
695	cpp_options="${cpp_options},-D__$string"
696	else
697	cpp_options="$cpp_options -D__$string "
698	fi
699	fi
700	done
701
702
703
704	# NETCDF-OPTIONEN ERMITTELN
705	line=""
706	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
707	while read line1
708	do
709
710	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
711	then
712	line="$line1"
713	fi
714
715	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
716	then
717	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
718	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
719	fi
720
721	done < $tmp_mbuild
722
723	line=""
724	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
725	while read line1
726	do
727
728	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
729	then
730	line="$line1"
731	fi
732
733	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
734	then
735	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
736	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
737	fi
738
739	done < $tmp_mbuild
740
741
742
743	# get make options
744	line=""
745	found=false
746	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
747	while read line1
748	do
749
750	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
751	then
752	line="$line1"
753	fi
754
755	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
756	then
757	# remove colons from directive string
758	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
759
760	fi
761
762	done < $tmp_mbuild
763
764
765
766	# COMPILEROPTIONEN ERMITTELN
767	line=""
768	found=false
769	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
770	while read line1
771	do
772
773	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
774	then
775	line="$line1"
776	fi
777
778	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
779	then
780	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
781	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
782	found=true
783
784	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
785	compiler_options="$compiler_options $netcdf_inc"
786	fi
787
788	done < $tmp_mbuild
789
790	if [[ $found = false ]]
791	then
792	printf "\n +++ no compiler options found in configuration file"
793	printf "\n for \"$remote_host_string\" "
794	locat=config_file; exit
795	fi
796
797
798
799	# MPI LIBRARY ERMITTELN
800	line=""
801	found=false
802	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
803	while read line1
804	do
805
806	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
807	then
808	line="$line1"
809	fi
810
811	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
812	then
813	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
814	mpilib=`echo $line \| cut -d" " -s -f2`
815	found=true
816	fi
817
818	done < $tmp_mbuild
819
820	[[ $found = false ]] && mpilib=mpt
821
822
823
824
825	# LADER-OPTIONEN ERMITTELN
826	line=""
827	found=false
828	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
829	while read line1
830	do
831
832	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
833	then
834	line="$line1"
835	fi
836
837	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
838	then
839	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
840	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
841	found=true
842
843	# NETCDF-LIBRARY HINZUFUEGEN
844	loader_options="$loader_options $netcdf_lib"
845	fi
846
847	done < $tmp_mbuild
848
849	if [[ $found = false ]]
850	then
851	printf "\n +++ no loader options found in configuration file"
852	printf "\n for \"$remote_host_string\" "
853	locat=config_file; exit
854	fi
855
856
857	printf "\n\n#------------------------------------------------------------------------# \n"
858	if [[ $remote_host = $local_host ]]
859	then
860	column1="remote_host:"; column2="$remote_host (= local host!)"
861	else
862	column1="remote_host:"; column2=$remote_host
863	fi
864	printf "\| $column1$column2 \| \n"
865	printf "\| \| \n"
866	column1="conditions:"; column2="$condition1 $condition2"
867	printf "\| $column1$column2 \| \n"
868	column1="make depository:"; column2=$remote_md
869	printf "\| $column1$column2 \| \n"
870	line=$(echo "$remote_md" \| cut -c51-)
871	while [[ "$line" != "" ]]
872	do
873	column1=""
874	column2=$line
875	printf "\| $column1$column2 \| \n"
876	line=$(echo "$line" \| cut -c51-)
877	done
878	if [[ $compile_utility_programs = true ]]
879	then
880	column1="utility directory:"; column2=$remote_ud
881	printf "\| $column1$column2 \| \n"
882	fi
883	column1="username:"; column2=$remote_username
884	printf "\| $column1$column2 \| \n"
885	column1="addres:"; column2=$remote_addres
886	printf "\| $column1$column2 \| \n"
887	column1="compiler:"; column2=$compiler_name
888	printf "\| $column1$column2 \| \n"
889	if [[ $compile_utility_programs = true ]]
890	then
891	column1="serial compiler:"; column2=$compiler_name_ser
892	printf "\| $column1$column2 \| \n"
893	fi
894	if [[ "$make_options" != "" ]]
895	then
896	column1="make options:"; column2=$make_options
897	printf "\| $column1$column2 \| \n"
898	fi
899	column1="cpp options:"; column2=$cpp_options
900	printf "\| $column1$column2 \| \n"
901	line=$(echo "$cpp_options" \| cut -c51-)
902	while [[ "$line" != "" ]]
903	do
904	column1=""
905	column2=$line
906	printf "\| $column1$column2 \| \n"
907	line=$(echo "$line" \| cut -c51-)
908	done
909	column1="compiler options:"; column2=$compiler_options
910	printf "\| $column1$column2 \| \n"
911	line=$(echo "$compiler_options" \| cut -c51-)
912	while [[ "$line" != "" ]]
913	do
914	column1=""
915	column2=$line
916	printf "\| $column1$column2 \| \n"
917	line=$(echo "$line" \| cut -c51-)
918	done
919	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
920	then
921	column1="mpi library:"; column2=$mpilib
922	printf "\| $column1$column2 \| \n"
923	fi
924	column1="loader options:"; column2=$loader_options
925	printf "\| $column1$column2 \| \n"
926	line=$(echo "$loader_options" \| cut -c51-)
927	while [[ "$line" != "" ]]
928	do
929	column1=""
930	column2=$line
931	printf "\| $column1$column2 \| \n"
932	line=$(echo "$line" \| cut -c51-)
933	done
934	printf "#------------------------------------------------------------------------# \n"
935
936	if [[ $silent = false ]]
937	then
938	answer=dummy
939	printf "\n\n"
940	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
941	do
942	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
943	read answer
944	done
945	if [[ $answer = a \|\| $answer = A ]]
946	then
947	locat=user_abort; exit
948	fi
949	if [[ $answer = c \|\| $answer = C ]]
950	then
951	silent=false
952	fi
953	if [[ $answer = s \|\| $answer = S ]]
954	then
955	continue
956	fi
957	fi
958
959
960	# make on remote host
961	if [[ $remote_host != $local_host ]]
962	then
963
964	if [[ $compile_utility_programs = false ]]
965	then
966
967	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
968	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
969	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
970	if [[ $remote_host != lctit ]]
971	then
972	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
973	else
974	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
975	# MIT SSH, DESHALB AUFRUF PER PIPE
976	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
977	fi
978	if [[ $local_host = decalpha ]]
979	then
980	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
981	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
982	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
983	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
984	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
985	else
986	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
987	fi
988
989
990
991	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
992	echo " *** untar previous update on remote host, if existing"
993	if [[ $remote_host != lctit ]]
994	then
995	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
996	else
997	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
998	# MIT SSH, DESHALB AUFRUF PER PIPE
999	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1000	fi
1001
1002
1003	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1004	echo " *** untar actual sources on remote host"
1005	if [[ $remote_host != lctit ]]
1006	then
1007	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1008	else
1009	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1010	# MIT SSH, DESHALB AUFRUF PER PIPE
1011	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1012	fi
1013
1014
1015	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1016	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1017	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1018	# Z.B. DIE PFADE ZUM COMPILER)
1019	echo " *** execute \"make\" on remote host"
1020
1021	if [[ $remote_host = nech ]]
1022	then
1023	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1024	else
1025	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1026	fi
1027
1028	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1029	then
1030
1031	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1032
1033	elif [[ $remote_host = ibmh ]]
1034	then
1035
1036	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1037
1038	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1039	then
1040
1041	print ". /usr/share/modules/init/bash; module load ifort/11.0.069; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1042	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1043	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1044
1045	elif [[ $remote_host = lctit ]]
1046	then
1047
1048	echo " " > ${remote_host}_last_make_protokoll
1049	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1050	do
1051	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1052	done
1053
1054	elif [[ $remote_host = lcxt4 ]]
1055	then
1056
1057	print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1058
1059	else
1060
1061	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1062
1063	fi
1064
1065	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1066	then
1067	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1068	if [[ $silent = false ]]
1069	then
1070	answer=dummy
1071	printf "\n"
1072	while [[ "$answer" != c && "$answer" != k ]]
1073	do
1074	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1075	read answer
1076	if [[ "$answer" = l ]]
1077	then
1078	more ${remote_host}_last_make_protokoll
1079	fi
1080	done
1081	if [[ $answer = k ]]
1082	then
1083	locat=user_abort; exit
1084	fi
1085	fi
1086	fi
1087
1088
1089
1090	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1091	printf "\n *** tar update on remote host ..."
1092	if [[ $remote_host != lctit ]]
1093	then
1094	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1095	else
1096	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1097	# MIT SSH, DESHALB AUFRUF PER PIPE
1098	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1099	fi
1100
1101
1102	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1103	# printf "\n *** \"make clean\" on remote host ..."
1104	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1105	# printf "\n"
1106
1107
1108
1109
1110	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1111	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1112	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1113	elif [[ $compile_utility_programs = true ]]
1114	then
1115
1116	printf "\n\n"
1117	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1118	cd ${local_source_path}/../SCRIPTS
1119
1120	if [[ $remote_host != lctit ]]
1121	then
1122	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1123	else
1124	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1125	# MIT SSH, DESHALB AUFRUF PER PIPE
1126	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1127	fi
1128
1129	# KOPIEREN DER SCRIPTE
1130	if [[ $local_host = decalpha ]]
1131	then
1132	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1133	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1134	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1135	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1136	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1137	else
1138	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1139	fi
1140
1141	cd - > /dev/null
1142	cd ${local_source_path}/../UTIL
1143
1144
1145	# KOPIEREN DER UTILITY-PROGRAMME
1146	if [[ $local_host = decalpha ]]
1147	then
1148	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1149	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1150	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1151	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1152	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1153	else
1154	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1155	fi
1156
1157
1158
1159	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1160	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1161	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1162	# Z.B. DIE PFADE ZUM COMPILER)
1163	echo " *** execute \"make\" on remote host"
1164
1165	if [[ $remote_host = nech ]]
1166	then
1167	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1168	else
1169	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1170	fi
1171
1172	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1173	then
1174
1175	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1176
1177	elif [[ $remote_host = ibmh ]]
1178	then
1179
1180	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1181
1182	elif [[ $remote_host = lctit ]]
1183	then
1184
1185	echo " " > ${remote_host}_last_make_protokoll
1186	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1187	do
1188	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1189	done
1190
1191	elif [[ $remote_host = lcxt4 ]]
1192	then
1193
1194	print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1195
1196	else
1197
1198	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1199
1200	fi
1201
1202	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1203
1204	rm -rf ${remote_host}_last_make_protokoll
1205
1206	# make on local host
1207	else
1208
1209	if [[ $compile_utility_programs = false ]]
1210	then
1211
1212	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1213	eval remote_md=$remote_md
1214	if [[ ! -d $remote_md ]]
1215	then
1216	if mkdir $remote_md
1217	then
1218	printf "\n\n *** directory for make depository:"
1219	printf "\n $remote_md"
1220	printf "\n was created\n"
1221	else
1222	printf "\n +++ directory for make depository:"
1223	printf "\n $remote_md"
1224	printf "\n cannot be created"
1225	locat=local_depository_path; exit
1226	fi
1227	fi
1228
1229	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1230	echo " "
1231	echo " *** updating sources in $remote_md"
1232	cd $remote_md
1233	cp $local_source_path/${mainprog}_sources.tar .
1234	tar xf ${mainprog}_sources.tar
1235
1236	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1237	echo " "
1238	echo " *** execute \"make\" on local host"
1239
1240	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1241
1242	if [[ $? != 0 ]]
1243	then
1244	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1245	if [[ $silent = false ]]
1246	then
1247	answer=dummy
1248	printf "\n"
1249	while [[ "$answer" != c && "$answer" != k ]]
1250	do
1251	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1252	read answer
1253	if [[ "$answer" = l ]]
1254	then
1255	more ${remote_host}_last_make_protokoll
1256	fi
1257	done
1258	if [[ $answer = k ]]
1259	then
1260	locat=user_abort; exit
1261	fi
1262	fi
1263	fi
1264
1265
1266	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1267	printf "\n *** tar update on local host ..."
1268	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1269
1270
1271	# COMPILE THE UTILITY PROGRAMS
1272	elif [[ $compile_utility_programs = true ]]
1273	then
1274	printf "\n\n"
1275	echo " *** compiling the utility programs ..."
1276	cd ${local_source_path}/../UTIL
1277	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1278	cd - > /dev/null
1279	fi
1280
1281	fi
1282
1283	done
1284
1285
1286	if [[ $host_found = false ]]
1287	then
1288	if [[ $host = all ]]
1289	then
1290	printf "\n +++ no hosts found in configuration file"
1291	else
1292	printf "\n +++ host \"$host\" not found in configuration file"
1293	fi
1294	locat=config_file; exit
1295	fi
1296
1297
1298
1299	# ABSCHLIESSENDE ARBEITEN
1300	rm -f hosts_found_in_config_file
1301

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |