Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 440

Last change on this file since 440 was 437, checked in by raasch, 15 years ago
script adjustements for lcxt5m
Property svn:keywords set to `Id Rev`
File size: 49.1 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 437 2010-02-01 04:15:58Z raasch $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90	# from configuration file
91	# host identifier (local_host) is read from config file
92	# 10/10/07 - Siggi - bugfix: handling of comment lines
93	# 18/07/08 - Siggi - adapted for lcsgih
94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95	# ({mainprog}_current_version)
96	# 02/10/08 - Siggi - adapted for lcxt4
97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
98	# remains in source directory, one depository per block
99	# (given in the config-file) is created, allways all
100	# files from the source directory are copied to the
101	# respective depository, no additional file checks are
102	# done any more (version 2.1)
103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
104	# other machines)
105	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
106	# .dvrserver.config
107	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
108	# 25/08/09 - BjornM- adapted for lck
109	# 01/12/09 - BjornM- re-adjustments for lcxt4
110	# 01/02/10 - Siggi - adjustments for lcxt5m
111
112
113
114	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
115	compile_utility_programs=false
116	config_file=.mrun.config
117	fimm=false
118	host=all
119	host_found=false
120	locat=normal
121	makefile=""
122	remote_mode=interactive
123	scirocco=false
124	silent=false
125	suf=f90
126	update=false
127	working_directory=`pwd`
128
129	typeset -i ih ihost=0
130
131	typeset -R30 calltime
132	typeset -L20 column1
133	typeset -L50 column2
134	typeset -L70 column3
135	typeset -L40 version="MBUILD 2.1 Rev$Rev: 437 $"
136
137	# FEHLERBEHANDLUNG
138	# BEI EXIT:
139	trap 'rm -rf $working_directory/tmp_mbuild
140	if [[ $locat != normal ]]
141	then
142	printf "\n\n +++ mbuild killed \n\n"
143	else
144	printf "\n\n *** mbuild finished \n\n"
145	fi' exit
146
147
148	# BEI TERMINAL-BREAK:
149	trap 'rm -rf $working_directory/tmp_mbuild
150	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
151	exit
152	' 2
153
154
155	tmp_mbuild=${working_directory}/tmp_mbuild
156
157	# SHELLSCRIPT-OPTIONEN EINLESEN
158	while getopts :c:h:m:rs:u option
159	do
160	case $option in
161	(c) config_file=$OPTARG;;
162	(h) host=$OPTARG;;
163	(m) makefile=$OPTARG;;
164	(r) remote_mode=batch;;
165	(s) suf=$OPTARG;;
166	(u) compile_utility_programs=true;;
167	(\?) printf "\n +++ unknown option $OPTARG \n";
168	locat=parameter; exit;;
169	esac
170	done
171
172
173
174	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
175	if [[ $remote_mode = batch ]]
176	then
177	printf "\n +++ sorry, batch mode does not work! \n"
178	locat=parameter; exit
179	fi
180
181
182
183	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
184	if [[ ! -f $config_file ]]
185	then
186	printf "\n +++ configuration file: "
187	printf "\n $config_file"
188	printf "\n does not exist"
189	locat=configuration; exit
190	fi
191
192
193
194	# LOKALEN RECHNER ERMITTELN
195	local_host_real_name=$(hostname)
196	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
197
198
199
200	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
201	line=""
202	grep "%host_identifier" $config_file > $tmp_mbuild
203	while read line
204	do
205	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
206	then
207	HOSTNAME=`echo $line \| cut -d" " -s -f2`
208	host_identifier=`echo $line \| cut -d" " -s -f3`
209	if [[ $local_host_real_name = $HOSTNAME ]]
210	then
211	local_host=$host_identifier
212	break
213	fi
214	fi
215	done < $tmp_mbuild
216
217	if [[ "$local_host" = "" ]]
218	then
219	printf "\n +++ no host identifier found in configuration file \"$config_file\""
220	printf "\n for local host \"$local_host_real_name\"."
221	printf "\n Please add line"
222	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
223	printf "\n to the configuration file."
224	locat=local_host; exit
225	fi
226
227
228
229	[[ $local_host_real_name = scirocco ]] && scirocco=true
230	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
231
232
233
234	if [[ $local_host != ibms ]]
235	then
236	config_file=$PWD/$config_file
237	else
238	config_file=`pwd`/$config_file
239	fi
240
241
242
243	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
244	line=""
245	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
246	while read line
247	do
248	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
249	then
250	local_username=`echo $line \| cut -d" " -s -f2`
251	fi
252	done < $tmp_mbuild
253
254
255	if [[ "$local_username" = "" ]]
256	then
257	printf "\n +++ no user name found in configuration file"
258	printf "\n for local host \"$local_host\" "
259	locat=config_file; exit
260	fi
261
262
263	# LOKALEN QUELLTEXTPFAD ERMITTELN.
264	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
265	# VEREINBART WURDE.
266	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
267	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
268	line=""
269	grep "%" $config_file > $tmp_mbuild
270	while read line
271	do
272	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
273	then
274	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
275	value=`echo $line \| cut -d" " -s -f2`
276	eval export $var=\$value
277	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
278	fi
279	done < $tmp_mbuild
280
281	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
282	line=""
283	grep "%source_path" $config_file > $tmp_mbuild
284	while read line
285	do
286	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
287	then
288	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
289	then
290	global_source_path=`echo $line \| cut -d" " -s -f2`
291	fi
292	fi
293	done < $tmp_mbuild
294
295	line=""
296	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
297	while read line
298	do
299	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
300	then
301	local_source_path=`echo $line \| cut -d" " -s -f2`
302	fi
303	done < $tmp_mbuild
304
305	if [[ "$local_source_path" = "" ]]
306	then
307	if [[ "$global_source_path" != "" ]]
308	then
309	local_source_path=$global_source_path
310	else
311	printf "\n +++ no source path found in configuration file"
312	printf "\n for local host \"$local_host\" "
313	printf "\n please set \"\%source_path\" in configuration file"
314	locat=config_file; exit
315	fi
316	fi
317	eval local_source_path=$local_source_path
318	eval local_source_path=$local_source_path
319
320
321
322	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
323	line=""
324	grep "%depository_path" $config_file > $tmp_mbuild
325	while read line
326	do
327	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
328	then
329	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
330	then
331	global_depository_path=`echo $line \| cut -d" " -s -f2`
332	fi
333	fi
334	done < $tmp_mbuild
335
336
337
338	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
339	# VEREINBART WURDE
340	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
341	then
342	printf "\n +++ no main program or more than one main program defined"
343	printf "\n in configuration file"
344	locat=configuration; exit
345	else
346	line=`grep "%mainprog" $config_file`
347	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
348	then
349	printf "\n +++ no main program defined in configuration file"
350	locat=configuration; exit
351	fi
352	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
353	fi
354
355
356
357	# MAKEFILE vorhanden
358	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
359	if [[ ! -f $makefile ]]
360	then
361	printf "\n +++ makefile: "
362	printf "\n $makefile"
363	printf "\n does not exist"
364	locat=makefile; exit
365	fi
366
367
368	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
369	calltime=$(date)
370	printf "\n"
371	printf "#------------------------------------------------------------------------# \n"
372	printf "\| $version$calltime \| \n"
373	printf "\| \| \n"
374	column1="called on:"; column2=$local_host_real_name
375	printf "\| $column1$column2 \| \n"
376	column1="local username:"; column2=$local_username
377	printf "\| $column1$column2 \| \n"
378	column1="local IP-addres:"; column2=$local_addres
379	printf "\| $column1$column2 \| \n"
380	column1="config file:"; column2=$config_file
381	printf "\| $column1$column2 \| \n"
382	column1="makefile:"; column2=$makefile
383	printf "\| $column1$column2 \| \n"
384	column1="local source path:"; column2=$local_source_path
385	printf "\| $column1$column2 \| \n"
386	printf "#------------------------------------------------------------------------# \n"
387
388	# printf "\| \| \n"
389
390
391	if [[ $compile_utility_programs = false ]]
392	then
393
394	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
395	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
396	cd $local_source_path
397	printf "\n\n *** tar of makefile and source files in $local_source_path"
398	tar -cf ${mainprog}_sources.tar Makefile *.$suf
399	printf "\n"
400
401	fi
402
403
404
405	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
406	if [[ $host = all ]]
407	then
408	printf "\n *** updates will be made for ALL hosts found in"
409	printf "\n the configuration file"
410	else
411	printf "\n *** update will be made for host \"$host\" "
412	fi
413
414	if [[ $silent = false ]]
415	then
416	answer=dummy
417	printf "\n\n"
418	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
419	do
420	printf " >>> continue (y/n) ? "
421	read answer
422	done
423	if [[ $answer = n \|\| $answer = N ]]
424	then
425	locat=user_abort; exit
426	fi
427	fi
428
429
430
431
432	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
433	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
434	printf "\n *** scanning configuration file for host(s) ..."
435
436	grep %fopts $config_file > $tmp_mbuild
437	while read line
438	do
439	# KOMMENTARZEILEN UEBERSPRINGEN
440	[[ $(echo $line \| cut -c1) = "#" ]] && continue
441	(( ihost = ihost + 1 ))
442	hostline[$ihost]="$line"
443	done < $tmp_mbuild
444
445
446	while (( ih < ihost ))
447	do
448
449	(( ih = ih + 1 ))
450
451	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
452	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
453	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
454	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
455	remote_host=`echo $remote_host_string \| cut -d" " -f1`
456	if [[ $host != all ]]
457	then
458	[[ $remote_host != $host ]] && continue
459	fi
460	host_found=true
461	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
462	if [[ $condition1 = $remote_host ]]
463	then
464	condition1=""
465	else
466	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
467	fi
468
469	netcdf_inc=""
470	netcdf_lib=""
471
472	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
473	case $remote_host in
474	(lcmuk) remote_addres=130.75.105.2;;
475	(lcsgib) remote_addres=130.73.232.102;;
476	(lcsgih) remote_addres=130.75.4.102;;
477	(lck) remote_addres=165.132.26.61;;
478	(lctit) remote_addres=172.17.75.161;;
479	(lcxt4) remote_addres=129.177.20.113;;
480	(lcxt5m) remote_addres=193.166.211.144;;
481	(decalpha) remote_addres=165.132.26.56;;
482	(ibmh) remote_addres=136.172.40.15;;
483	(ibms) remote_addres=150.183.5.101;;
484	(ibmy) remote_addres=165.132.26.58;;
485	(nech) remote_addres=136.172.44.192;;
486	(neck) remote_addres=133.5.178.11;;
487	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
488	(*) if [[ $local_host != $remote_host ]]
489	then
490	printf "\n +++ remote host \"$remote_host\" unknown";
491	printf "\n please inform S. Raasch!"
492	fi;;
493	esac
494
495
496	# REMOTE-USERNAMEN ERMITTELN
497	line=""
498	found=false
499	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
500	while read line1
501	do
502
503	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
504	then
505	line="$line1"
506	fi
507
508	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
509	then
510	remote_username=`echo $line \| cut -d" " -s -f2`
511	found=true
512	fi
513
514	done < $tmp_mbuild
515
516	if [[ $found = false ]]
517	then
518	printf "\n +++ no remote username found in configuration file"
519	printf "\n for \"$remote_host_string\" "
520	locat=config_file; exit
521	fi
522
523
524	# REMOTE-QUELLTEXTPFAD ERMITTELN
525	line=""
526	remote_source_path=""
527	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
528	while read line1
529	do
530
531	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
532	then
533	line="$line1"
534	fi
535
536	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
537	then
538	remote_source_path=`echo $line \| cut -d" " -s -f2`
539	fi
540
541	done < $tmp_mbuild
542
543	if [[ "$remote_source_path" = "" ]]
544	then
545	if [[ "$global_source_path" != "" ]]
546	then
547	remote_source_path=$global_source_path
548	else
549	printf "\n +++ no source path found in configuration file"
550	printf "\n for \"$remote_host_string\" "
551	locat=config_file; exit
552	fi
553	fi
554
555	remote_ud=${remote_source_path}/../UTIL
556	remote_ud=$(eval echo $remote_ud)
557
558
559	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
560	remote_md=""
561	line=""
562	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
563	while read line1
564	do
565
566	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
567	then
568	line="$line1"
569	fi
570
571	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
572	then
573	remote_md=`echo $line \| cut -d" " -s -f2`
574	fi
575
576	done < $tmp_mbuild
577
578	if [[ "$remote_md" = "" ]]
579	then
580	if [[ "$global_depository_path" != "" ]]
581	then
582	remote_md=$global_depository_path
583	else
584	printf "\n +++ no depository path found in configuration file"
585	printf "\n for \"$remote_host_string\" "
586	printf "\n please set \"\%depository_path\" in configuration file"
587	locat=config_file; exit
588	fi
589	fi
590
591	remote_md=$(eval echo $remote_md)
592	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
593	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
594
595
596	# COMPILERNAMEN ERMITTELN
597	line=""
598	found=false
599	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
600	while read line1
601	do
602
603	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
604	then
605	line="$line1"
606	fi
607
608	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
609	then
610	compiler_name=`echo $line \| cut -d" " -s -f2`
611	found=true
612	fi
613
614	done < $tmp_mbuild
615
616	if [[ $found = false ]]
617	then
618	printf "\n +++ no compiler name found in configuration file"
619	printf "\n for \"$remote_host_string\" "
620	locat=config_file; exit
621	fi
622
623
624	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
625	# SERIELLER COMPILERNAME ERMITTELT WERDEN
626	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
627	then
628	line=""
629	found=false
630	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
631	while read line1
632	do
633
634	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
635	then
636	line="$line1"
637	fi
638
639	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
640	then
641	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
642	found=true
643	fi
644
645	done < $tmp_mbuild
646
647	if [[ $found = false ]]
648	then
649	printf "\n +++ no serial compiler name found in configuration file"
650	printf "\n for \"$remote_host_string\" "
651	locat=config_file; exit
652	fi
653	else
654	compiler_name_ser=$compiler_name
655	fi
656
657
658
659	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
660	line=""
661	found=false
662	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
663	while read line1
664	do
665
666	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
667	then
668	line="$line1"
669	fi
670
671	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
672	then
673	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
674	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
675	found=true
676	fi
677
678	done < $tmp_mbuild
679
680	if [[ $found = false ]]
681	then
682	printf "\n +++ no preprocessor options found in configuration file"
683	printf "\n for \"$remote_host_string\" "
684	locat=config_file; exit
685	fi
686
687
688	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
689	for string in $remote_host_string
690	do
691	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
692	then
693	cpp_options="$cpp_options -D__lc "
694	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
695	then
696	cpp_options="${cpp_options},-D__ibm"
697	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
698	then
699	cpp_options="${cpp_options} -D__nec"
700	else
701	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
702	then
703	cpp_options="${cpp_options},-D__$string"
704	else
705	cpp_options="$cpp_options -D__$string "
706	fi
707	fi
708	done
709
710
711
712	# NETCDF-OPTIONEN ERMITTELN
713	line=""
714	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
715	while read line1
716	do
717
718	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
719	then
720	line="$line1"
721	fi
722
723	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
724	then
725	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
726	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
727	fi
728
729	done < $tmp_mbuild
730
731	line=""
732	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
733	while read line1
734	do
735
736	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
737	then
738	line="$line1"
739	fi
740
741	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
742	then
743	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
744	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
745	fi
746
747	done < $tmp_mbuild
748
749
750
751	# COMPILEROPTIONEN ERMITTELN
752	line=""
753	found=false
754	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
755	while read line1
756	do
757
758	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
759	then
760	line="$line1"
761	fi
762
763	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
764	then
765	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
766	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
767	found=true
768
769	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
770	compiler_options="$compiler_options $netcdf_inc"
771	fi
772
773	done < $tmp_mbuild
774
775	if [[ $found = false ]]
776	then
777	printf "\n +++ no compiler options found in configuration file"
778	printf "\n for \"$remote_host_string\" "
779	locat=config_file; exit
780	fi
781
782
783
784	# MPI LIBRARY ERMITTELN
785	line=""
786	found=false
787	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
788	while read line1
789	do
790
791	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
792	then
793	line="$line1"
794	fi
795
796	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
797	then
798	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
799	mpilib=`echo $line \| cut -d" " -s -f2`
800	found=true
801	fi
802
803	done < $tmp_mbuild
804
805	[[ $found = false ]] && mpilib=mpt
806
807
808
809
810	# LADER-OPTIONEN ERMITTELN
811	line=""
812	found=false
813	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
814	while read line1
815	do
816
817	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
818	then
819	line="$line1"
820	fi
821
822	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
823	then
824	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
825	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
826	found=true
827
828	# NETCDF-LIBRARY HINZUFUEGEN
829	loader_options="$loader_options $netcdf_lib"
830	fi
831
832	done < $tmp_mbuild
833
834	if [[ $found = false ]]
835	then
836	printf "\n +++ no loader options found in configuration file"
837	printf "\n for \"$remote_host_string\" "
838	locat=config_file; exit
839	fi
840
841
842	printf "\n\n#------------------------------------------------------------------------# \n"
843	if [[ $remote_host = $local_host ]]
844	then
845	column1="remote_host:"; column2="$remote_host (= local host!)"
846	else
847	column1="remote_host:"; column2=$remote_host
848	fi
849	printf "\| $column1$column2 \| \n"
850	printf "\| \| \n"
851	column1="conditions:"; column2="$condition1 $condition2"
852	printf "\| $column1$column2 \| \n"
853	column1="make depository:"; column2=$remote_md
854	printf "\| $column1$column2 \| \n"
855	line=$(echo "$remote_md" \| cut -c51-)
856	while [[ "$line" != "" ]]
857	do
858	column1=""
859	column2=$line
860	printf "\| $column1$column2 \| \n"
861	line=$(echo "$line" \| cut -c51-)
862	done
863	if [[ $compile_utility_programs = true ]]
864	then
865	column1="utility directory:"; column2=$remote_ud
866	printf "\| $column1$column2 \| \n"
867	fi
868	column1="username:"; column2=$remote_username
869	printf "\| $column1$column2 \| \n"
870	column1="addres:"; column2=$remote_addres
871	printf "\| $column1$column2 \| \n"
872	column1="compiler:"; column2=$compiler_name
873	printf "\| $column1$column2 \| \n"
874	if [[ $compile_utility_programs = true ]]
875	then
876	column1="serial compiler:"; column2=$compiler_name_ser
877	printf "\| $column1$column2 \| \n"
878	fi
879	column1="cpp options:"; column2=$cpp_options
880	printf "\| $column1$column2 \| \n"
881	line=$(echo "$cpp_options" \| cut -c51-)
882	while [[ "$line" != "" ]]
883	do
884	column1=""
885	column2=$line
886	printf "\| $column1$column2 \| \n"
887	line=$(echo "$line" \| cut -c51-)
888	done
889	column1="compiler options:"; column2=$compiler_options
890	printf "\| $column1$column2 \| \n"
891	line=$(echo "$compiler_options" \| cut -c51-)
892	while [[ "$line" != "" ]]
893	do
894	column1=""
895	column2=$line
896	printf "\| $column1$column2 \| \n"
897	line=$(echo "$line" \| cut -c51-)
898	done
899	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
900	then
901	column1="mpi library:"; column2=$mpilib
902	printf "\| $column1$column2 \| \n"
903	fi
904	column1="loader options:"; column2=$loader_options
905	printf "\| $column1$column2 \| \n"
906	line=$(echo "$loader_options" \| cut -c51-)
907	while [[ "$line" != "" ]]
908	do
909	column1=""
910	column2=$line
911	printf "\| $column1$column2 \| \n"
912	line=$(echo "$line" \| cut -c51-)
913	done
914	printf "#------------------------------------------------------------------------# \n"
915
916	if [[ $silent = false ]]
917	then
918	answer=dummy
919	printf "\n\n"
920	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
921	do
922	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
923	read answer
924	done
925	if [[ $answer = a \|\| $answer = A ]]
926	then
927	locat=user_abort; exit
928	fi
929	if [[ $answer = c \|\| $answer = C ]]
930	then
931	silent=false
932	fi
933	if [[ $answer = s \|\| $answer = S ]]
934	then
935	continue
936	fi
937	fi
938
939
940	if [[ $remote_mode = batch ]]
941	then
942
943	# BATCH-JOB PARAMETER SETZEN
944	case $remote_host in
945	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
946	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
947	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
948	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
949	esac
950
951
952	# BATCH-JOB ZUSAMMENSTELLEN
953	printf "\n *** creating batch-job for remote host"
954	echo " " > mbuild_job
955
956	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
957	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
958	if [[ $remote_host = t3ej2 ]]
959	then
960	echo "set +vx" >> mbuild_job
961	echo ". .profile" >> mbuild_job
962	echo "set -x" >> mbuild_job
963	fi
964
965	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
966	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
967	then
968	echo "module list" >> mbuild_job
969	fi
970
971
972	# WECHSEL IN TEMPORAERES VERZEICHNIS
973	echo "cd ${remote_md}" >> mbuild_job
974
975
976	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
977	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
978	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
979
980
981	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
982	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
983
984
985	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
986	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
987
988
989	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
990	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
991	echo "chmod u+w *" >> mbuild_job
992
993	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
994	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
995
996
997	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
998	echo "make clean" >> mbuild_job
999	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1000	echo "rm *.f90 Makefile" >> mbuild_job
1001
1002
1003
1004	# JOB MITTELS SUBJOB STARTEN
1005	printf "\n *** sending batch job to remote host"
1006	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1007
1008
1009	# JOBFILE LOESCHEN
1010	# rm aljob
1011
1012	else
1013
1014	if [[ $remote_host != $local_host ]]
1015	then
1016
1017	if [[ $compile_utility_programs = false ]]
1018	then
1019
1020	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1021	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1022	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1023	if [[ $remote_host != lctit ]]
1024	then
1025	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1026	else
1027	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1028	# MIT SSH, DESHALB AUFRUF PER PIPE
1029	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1030	fi
1031	if [[ $local_host = decalpha ]]
1032	then
1033	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1034	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1035	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1036	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1037	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1038	else
1039	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1040	fi
1041
1042
1043
1044	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1045	echo " *** untar previous update on remote host, if existing"
1046	if [[ $remote_host != lctit ]]
1047	then
1048	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1049	else
1050	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1051	# MIT SSH, DESHALB AUFRUF PER PIPE
1052	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1053	fi
1054
1055
1056	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1057	echo " *** untar actual sources on remote host"
1058	if [[ $remote_host != lctit ]]
1059	then
1060	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1061	else
1062	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1063	# MIT SSH, DESHALB AUFRUF PER PIPE
1064	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1065	fi
1066
1067
1068	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1069	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1070	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1071	# Z.B. DIE PFADE ZUM COMPILER)
1072	echo " *** execute \"make\" on remote host"
1073
1074	if [[ $remote_host = nech ]]
1075	then
1076	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1077	else
1078	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1079	fi
1080
1081	if [[ $remote_host = t3eh ]]
1082	then
1083
1084	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1085
1086	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1087	then
1088
1089	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1090
1091	elif [[ $remote_host = ibmh ]]
1092	then
1093
1094	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1095
1096	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1097	then
1098
1099	print ". /usr/share/modules/init/bash; module load ifort/11.0.069; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1100	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1101	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1102
1103	elif [[ $remote_host = lctit ]]
1104	then
1105
1106	echo " " > ${remote_host}_last_make_protokoll
1107	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1108	do
1109	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1110	done
1111
1112	elif [[ $remote_host = lcxt4 ]]
1113	then
1114
1115	print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1116
1117	else
1118
1119	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1120
1121	fi
1122
1123	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1124	then
1125	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1126	if [[ $silent = false ]]
1127	then
1128	answer=dummy
1129	printf "\n"
1130	while [[ "$answer" != c && "$answer" != k ]]
1131	do
1132	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1133	read answer
1134	if [[ "$answer" = l ]]
1135	then
1136	more ${remote_host}_last_make_protokoll
1137	fi
1138	done
1139	if [[ $answer = k ]]
1140	then
1141	locat=user_abort; exit
1142	fi
1143	fi
1144	fi
1145
1146
1147
1148	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1149	printf "\n *** tar update on remote host ..."
1150	if [[ $remote_host != lctit ]]
1151	then
1152	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1153	else
1154	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1155	# MIT SSH, DESHALB AUFRUF PER PIPE
1156	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1157	fi
1158
1159
1160	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1161	# printf "\n *** \"make clean\" on remote host ..."
1162	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1163	# printf "\n"
1164
1165
1166
1167
1168	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1169	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1170	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1171	elif [[ $compile_utility_programs = true ]]
1172	then
1173
1174	printf "\n\n"
1175	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1176	cd ${local_source_path}/../SCRIPTS
1177
1178	if [[ $remote_host != lctit ]]
1179	then
1180	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1181	else
1182	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1183	# MIT SSH, DESHALB AUFRUF PER PIPE
1184	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1185	fi
1186
1187	# KOPIEREN DER SCRIPTE
1188	if [[ $local_host = decalpha ]]
1189	then
1190	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1191	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1192	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1193	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1194	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1195	else
1196	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1197	fi
1198
1199	cd - > /dev/null
1200	cd ${local_source_path}/../UTIL
1201
1202
1203	# KOPIEREN DER UTILITY-PROGRAMME
1204	if [[ $local_host = decalpha ]]
1205	then
1206	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1207	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1208	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1209	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1210	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1211	else
1212	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1213	fi
1214
1215
1216
1217	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1218	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1219	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1220	# Z.B. DIE PFADE ZUM COMPILER)
1221	echo " *** execute \"make\" on remote host"
1222
1223	if [[ $remote_host = nech ]]
1224	then
1225	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1226	else
1227	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1228	fi
1229
1230	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1231	then
1232
1233	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1234
1235	elif [[ $remote_host = ibmh ]]
1236	then
1237
1238	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1239
1240	elif [[ $remote_host = lctit ]]
1241	then
1242
1243	echo " " > ${remote_host}_last_make_protokoll
1244	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1245	do
1246	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1247	done
1248
1249	elif [[ $remote_host = lcxt4 ]]
1250	then
1251
1252	print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1253
1254	else
1255
1256	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1257
1258	fi
1259
1260	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1261
1262	rm -rf ${remote_host}_last_make_protokoll
1263
1264	else
1265
1266	if [[ $compile_utility_programs = false ]]
1267	then
1268
1269	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1270	eval remote_md=$remote_md
1271	if [[ ! -d $remote_md ]]
1272	then
1273	if mkdir $remote_md
1274	then
1275	printf "\n\n *** directory for make depository:"
1276	printf "\n $remote_md"
1277	printf "\n was created\n"
1278	else
1279	printf "\n +++ directory for make depository:"
1280	printf "\n $remote_md"
1281	printf "\n cannot be created"
1282	locat=local_depository_path; exit
1283	fi
1284	fi
1285
1286	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1287	echo " "
1288	echo " *** updating sources in $remote_md"
1289	cd $remote_md
1290	cp $local_source_path/${mainprog}_sources.tar .
1291	tar xf ${mainprog}_sources.tar
1292
1293	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1294	echo " "
1295	echo " *** execute \"make\" on local host"
1296
1297	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1298
1299	if [[ $? != 0 ]]
1300	then
1301	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1302	if [[ $silent = false ]]
1303	then
1304	answer=dummy
1305	printf "\n"
1306	while [[ "$answer" != c && "$answer" != k ]]
1307	do
1308	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1309	read answer
1310	if [[ "$answer" = l ]]
1311	then
1312	more ${remote_host}_last_make_protokoll
1313	fi
1314	done
1315	if [[ $answer = k ]]
1316	then
1317	locat=user_abort; exit
1318	fi
1319	fi
1320	fi
1321
1322
1323	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1324	printf "\n *** tar update on local host ..."
1325	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1326
1327
1328	# COMPILE THE UTILITY PROGRAMS
1329	elif [[ $compile_utility_programs = true ]]
1330	then
1331	printf "\n\n"
1332	echo " *** compiling the utility programs ..."
1333	cd ${local_source_path}/../UTIL
1334	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1335	cd - > /dev/null
1336	fi
1337
1338	fi
1339
1340	fi
1341	done
1342
1343
1344	if [[ $host_found = false ]]
1345	then
1346	if [[ $host = all ]]
1347	then
1348	printf "\n +++ no hosts found in configuration file"
1349	else
1350	printf "\n +++ host \"$host\" not found in configuration file"
1351	fi
1352	locat=config_file; exit
1353	fi
1354
1355
1356
1357	# ABSCHLIESSENDE ARBEITEN
1358	rm -f hosts_found_in_config_file
1359

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |