Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 221

Last change on this file since 221 was 221, checked in by raasch, 16 years ago
new environment variable mpilib in configuration file, used by mrun, mbuild, and subjob; small bugfix concerning t<0 in init_cloud_physics
Property svn:keywords set to `Id Rev`
File size: 48.9 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 221 2009-01-12 15:32:23Z raasch $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90	# from configuration file
91	# host identifier (local_host) is read from config file
92	# 10/10/07 - Siggi - bugfix: handling of comment lines
93	# 18/07/08 - Siggi - adapted for lcsgih
94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95	# ({mainprog}_current_version)
96	# 02/10/08 - Siggi - adapted for lcxt4
97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
98	# remains in source directory, one depository per block
99	# (given in the config-file) is created, always all files
100	# from the source directory are copied to the respective
101	# depository, no additional file checks are done any more
102	# (version 2.1)
103
104
105
106	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
107	compile_utility_programs=false
108	config_file=.mrun.config
109	fimm=false
110	host=all
111	host_found=false
112	ibm_hb_done=false
113	lcmuk_done=false
114	locat=normal
115	makefile=""
116	remote_mode=interactive
117	scirocco=false
118	silent=false
119	suf=f90
120	update=false
121	working_directory=`pwd`
122
123	typeset -i ih ihost=0
124
125	typeset -R30 calltime
126	typeset -L20 column1
127	typeset -L50 column2
128	typeset -L70 column3
129	typeset -L40 version="MBUILD 2.1 Rev$Rev: 221 $"
130
131	# FEHLERBEHANDLUNG
132	# BEI EXIT:
133	trap 'rm -rf $working_directory/tmp_mbuild
134	if [[ $locat != normal ]]
135	then
136	printf "\n\n +++ mbuild killed \n\n"
137	else
138	printf "\n\n *** mbuild finished \n\n"
139	fi' exit
140
141
142	# BEI TERMINAL-BREAK:
143	trap 'rm -rf $working_directory/tmp_mbuild
144	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
145	exit
146	' 2
147
148
149	tmp_mbuild=${working_directory}/tmp_mbuild
150
151	# SHELLSCRIPT-OPTIONEN EINLESEN
152	while getopts :c:h:m:rs:u option
153	do
154	case $option in
155	(c) config_file=$OPTARG;;
156	(h) host=$OPTARG;;
157	(m) makefile=$OPTARG;;
158	(r) remote_mode=batch;;
159	(s) suf=$OPTARG;;
160	(u) compile_utility_programs=true;;
161	(\?) printf "\n +++ unknown option $OPTARG \n";
162	locat=parameter; exit;;
163	esac
164	done
165
166
167
168	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
169	if [[ $remote_mode = batch ]]
170	then
171	printf "\n +++ sorry, batch mode does not work! \n"
172	locat=parameter; exit
173	fi
174
175
176
177	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
178	if [[ ! -f $config_file ]]
179	then
180	printf "\n +++ configuration file: "
181	printf "\n $config_file"
182	printf "\n does not exist"
183	locat=configuration; exit
184	fi
185
186
187
188	# LOKALEN RECHNER ERMITTELN
189	local_host_real_name=$(hostname)
190	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
191
192
193
194	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
195	line=""
196	grep "%host_identifier" $config_file > $tmp_mbuild
197	while read line
198	do
199	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
200	then
201	HOSTNAME=`echo $line \| cut -d" " -s -f2`
202	host_identifier=`echo $line \| cut -d" " -s -f3`
203	if [[ $local_host_real_name = $HOSTNAME ]]
204	then
205	local_host=$host_identifier
206	break
207	fi
208	fi
209	done < $tmp_mbuild
210
211	if [[ "$local_host" = "" ]]
212	then
213	printf "\n +++ no host identifier found in configuration file \"$config_file\""
214	printf "\n for local host \"$local_host_real_name\"."
215	printf "\n Please add line"
216	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
217	printf "\n to the configuration file."
218	locat=local_host; exit
219	fi
220
221
222
223	[[ $local_host_real_name = scirocco ]] && scirocco=true
224	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
225
226
227
228	if [[ $local_host != ibms ]]
229	then
230	config_file=$PWD/$config_file
231	else
232	config_file=`pwd`/$config_file
233	fi
234
235
236
237	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
238	line=""
239	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
240	while read line
241	do
242	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
243	then
244	local_username=`echo $line \| cut -d" " -s -f2`
245	fi
246	done < $tmp_mbuild
247
248
249	if [[ "$local_username" = "" ]]
250	then
251	printf "\n +++ no user name found in configuration file"
252	printf "\n for local host \"$local_host\" "
253	locat=config_file; exit
254	fi
255
256
257	# LOKALEN QUELLTEXTPFAD ERMITTELN.
258	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
259	# VEREINBART WURDE.
260	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
261	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
262	line=""
263	grep "%" $config_file > $tmp_mbuild
264	while read line
265	do
266	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
267	then
268	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
269	value=`echo $line \| cut -d" " -s -f2`
270	eval export $var=\$value
271	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
272	fi
273	done < $tmp_mbuild
274
275	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
276	line=""
277	grep "%source_path" $config_file > $tmp_mbuild
278	while read line
279	do
280	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
281	then
282	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
283	then
284	global_source_path=`echo $line \| cut -d" " -s -f2`
285	fi
286	fi
287	done < $tmp_mbuild
288
289	line=""
290	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
291	while read line
292	do
293	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
294	then
295	local_source_path=`echo $line \| cut -d" " -s -f2`
296	fi
297	done < $tmp_mbuild
298
299	if [[ "$local_source_path" = "" ]]
300	then
301	if [[ "$global_source_path" != "" ]]
302	then
303	local_source_path=$global_source_path
304	else
305	printf "\n +++ no source path found in configuration file"
306	printf "\n for local host \"$local_host\" "
307	printf "\n please set \"\%source_path\" in configuration file"
308	locat=config_file; exit
309	fi
310	fi
311	eval local_source_path=$local_source_path
312	eval local_source_path=$local_source_path
313
314
315
316	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
317	line=""
318	grep "%depository_path" $config_file > $tmp_mbuild
319	while read line
320	do
321	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
322	then
323	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
324	then
325	global_depository_path=`echo $line \| cut -d" " -s -f2`
326	fi
327	fi
328	done < $tmp_mbuild
329
330
331
332	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
333	# VEREINBART WURDE
334	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
335	then
336	printf "\n +++ no main program or more than one main program defined"
337	printf "\n in configuration file"
338	locat=configuration; exit
339	else
340	line=`grep "%mainprog" $config_file`
341	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
342	then
343	printf "\n +++ no main program defined in configuration file"
344	locat=configuration; exit
345	fi
346	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
347	fi
348
349
350
351	# MAKEFILE vorhanden
352	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
353	if [[ ! -f $makefile ]]
354	then
355	printf "\n +++ makefile: "
356	printf "\n $makefile"
357	printf "\n does not exist"
358	locat=makefile; exit
359	fi
360
361
362	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
363	calltime=$(date)
364	printf "\n"
365	printf "#------------------------------------------------------------------------# \n"
366	printf "\| $version$calltime \| \n"
367	printf "\| \| \n"
368	column1="called on:"; column2=$local_host_real_name
369	printf "\| $column1$column2 \| \n"
370	column1="local username:"; column2=$local_username
371	printf "\| $column1$column2 \| \n"
372	column1="local IP-addres:"; column2=$local_addres
373	printf "\| $column1$column2 \| \n"
374	column1="config file:"; column2=$config_file
375	printf "\| $column1$column2 \| \n"
376	column1="makefile:"; column2=$makefile
377	printf "\| $column1$column2 \| \n"
378	column1="local source path:"; column2=$local_source_path
379	printf "\| $column1$column2 \| \n"
380	printf "#------------------------------------------------------------------------# \n"
381
382	# printf "\| \| \n"
383
384
385	if [[ $compile_utility_programs = false ]]
386	then
387
388	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
389	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
390	cd $local_source_path
391	printf "\n\n *** tar of makefile and source files in $local_source_path"
392	tar -cf ${mainprog}_sources.tar Makefile *.$suf
393	printf "\n"
394
395	fi
396
397
398
399	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
400	if [[ $host = all ]]
401	then
402	printf "\n *** updates will be made for ALL hosts found in"
403	printf "\n the configuration file"
404	else
405	printf "\n *** update will be made for host \"$host\" "
406	fi
407
408	if [[ $silent = false ]]
409	then
410	answer=dummy
411	printf "\n\n"
412	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
413	do
414	printf " >>> continue (y/n) ? "
415	read answer
416	done
417	if [[ $answer = n \|\| $answer = N ]]
418	then
419	locat=user_abort; exit
420	fi
421	fi
422
423
424
425
426	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
427	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
428	printf "\n *** scanning configuration file for host(s) ..."
429
430	grep %fopts $config_file > $tmp_mbuild
431	while read line
432	do
433	# KOMMENTARZEILEN UEBERSPRINGEN
434	[[ $(echo $line \| cut -c1) = "#" ]] && continue
435	(( ihost = ihost + 1 ))
436	hostline[$ihost]="$line"
437	done < $tmp_mbuild
438
439
440	while (( ih < ihost ))
441	do
442
443	(( ih = ih + 1 ))
444
445	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
446	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
447	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
448	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
449	remote_host=`echo $remote_host_string \| cut -d" " -f1`
450	if [[ $host != all ]]
451	then
452	[[ $remote_host != $host ]] && continue
453	fi
454	host_found=true
455	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
456	if [[ $condition1 = $remote_host ]]
457	then
458	condition1=""
459	else
460	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
461	fi
462
463	netcdf_inc=""
464	netcdf_lib=""
465
466	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
467	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
468	then
469	if [[ $ibm_hb_done = true ]]
470	then
471	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
472	printf "\n been carried out on one of the HLRN machines\n"
473	continue
474	fi
475	fi
476
477	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
478	if [[ $remote_host = lcmuk ]]
479	then
480	if [[ $lcmuk_done = true ]]
481	then
482	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
483	printf "\n been carried out on this host\n"
484	continue
485	fi
486	fi
487
488
489	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
490	case $remote_host in
491	(lcmuk) remote_addres=130.75.105.2;;
492	(lcsgib) remote_addres=130.73.232.102;;
493	(lcsgih) remote_addres=130.75.4.103;;
494	(lctit) remote_addres=172.17.75.161;;
495	(lcxt4) remote_addres=129.177.20.113;;
496	(decalpha) remote_addres=165.132.26.56;;
497	(ibmb) remote_addres=130.73.230.10;;
498	(ibmh) remote_addres=130.75.4.10;;
499	(ibms) remote_addres=150.183.5.101;;
500	(ibmy) remote_addres=165.132.26.58;;
501	(nech) remote_addres=136.172.44.192;;
502	(neck) remote_addres=133.5.178.11;;
503	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
504	(*) if [[ $local_host != $remote_host ]]
505	then
506	printf "\n +++ remote host \"$remote_host\" unknown";
507	printf "\n please inform S. Raasch!"
508	fi;;
509	esac
510
511
512	# REMOTE-USERNAMEN ERMITTELN
513	line=""
514	found=false
515	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
516	while read line1
517	do
518
519	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
520	then
521	line="$line1"
522	fi
523
524	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
525	then
526	remote_username=`echo $line \| cut -d" " -s -f2`
527	found=true
528	fi
529
530	done < $tmp_mbuild
531
532	if [[ $found = false ]]
533	then
534	printf "\n +++ no remote username found in configuration file"
535	printf "\n for \"$remote_host_string\" "
536	locat=config_file; exit
537	fi
538
539
540	# REMOTE-QUELLTEXTPFAD ERMITTELN
541	line=""
542	remote_source_path=""
543	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
544	while read line1
545	do
546
547	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
548	then
549	line="$line1"
550	fi
551
552	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
553	then
554	remote_source_path=`echo $line \| cut -d" " -s -f2`
555	fi
556
557	done < $tmp_mbuild
558
559	if [[ "$remote_source_path" = "" ]]
560	then
561	if [[ "$global_source_path" != "" ]]
562	then
563	remote_source_path=$global_source_path
564	else
565	printf "\n +++ no source path found in configuration file"
566	printf "\n for \"$remote_host_string\" "
567	locat=config_file; exit
568	fi
569	fi
570
571	remote_ud=${remote_source_path}/../UTIL
572	remote_ud=$(eval echo $remote_ud)
573
574
575	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
576	remote_md=""
577	line=""
578	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
579	while read line1
580	do
581
582	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
583	then
584	line="$line1"
585	fi
586
587	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
588	then
589	remote_md=`echo $line \| cut -d" " -s -f2`
590	fi
591
592	done < $tmp_mbuild
593
594	if [[ "$remote_md" = "" ]]
595	then
596	if [[ "$global_depository_path" != "" ]]
597	then
598	remote_md=$global_depository_path
599	else
600	printf "\n +++ no depository path found in configuration file"
601	printf "\n for \"$remote_host_string\" "
602	printf "\n please set \"\%depository_path\" in configuration file"
603	locat=config_file; exit
604	fi
605	fi
606
607	remote_md=$(eval echo $remote_md)
608	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
609	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
610
611
612	# COMPILERNAMEN ERMITTELN
613	line=""
614	found=false
615	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
616	while read line1
617	do
618
619	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
620	then
621	line="$line1"
622	fi
623
624	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
625	then
626	compiler_name=`echo $line \| cut -d" " -s -f2`
627	found=true
628	fi
629
630	done < $tmp_mbuild
631
632	if [[ $found = false ]]
633	then
634	printf "\n +++ no compiler name found in configuration file"
635	printf "\n for \"$remote_host_string\" "
636	locat=config_file; exit
637	fi
638
639
640	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
641	# SERIELLER COMPILERNAME ERMITTELT WERDEN
642	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
643	then
644	line=""
645	found=false
646	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
647	while read line1
648	do
649
650	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
651	then
652	line="$line1"
653	fi
654
655	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
656	then
657	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
658	found=true
659	fi
660
661	done < $tmp_mbuild
662
663	if [[ $found = false ]]
664	then
665	printf "\n +++ no serial compiler name found in configuration file"
666	printf "\n for \"$remote_host_string\" "
667	locat=config_file; exit
668	fi
669	else
670	compiler_name_ser=$compiler_name
671	fi
672
673
674
675	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
676	line=""
677	found=false
678	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
679	while read line1
680	do
681
682	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
683	then
684	line="$line1"
685	fi
686
687	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
688	then
689	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
690	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
691	found=true
692	fi
693
694	done < $tmp_mbuild
695
696	if [[ $found = false ]]
697	then
698	printf "\n +++ no preprocessor options found in configuration file"
699	printf "\n for \"$remote_host_string\" "
700	locat=config_file; exit
701	fi
702
703
704	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
705	for string in $remote_host_string
706	do
707	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
708	then
709	cpp_options="$cpp_options -D__lc "
710	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
711	then
712	cpp_options="${cpp_options},-D__ibm"
713	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
714	then
715	cpp_options="${cpp_options} -D__nec"
716	else
717	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
718	then
719	cpp_options="${cpp_options},-D__$string"
720	else
721	cpp_options="$cpp_options -D__$string "
722	fi
723	fi
724	done
725
726
727
728	# NETCDF-OPTIONEN ERMITTELN
729	line=""
730	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
731	while read line1
732	do
733
734	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
735	then
736	line="$line1"
737	fi
738
739	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
740	then
741	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
742	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
743	fi
744
745	done < $tmp_mbuild
746
747	line=""
748	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
749	while read line1
750	do
751
752	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
753	then
754	line="$line1"
755	fi
756
757	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
758	then
759	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
760	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
761	fi
762
763	done < $tmp_mbuild
764
765
766
767	# COMPILEROPTIONEN ERMITTELN
768	line=""
769	found=false
770	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
771	while read line1
772	do
773
774	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
775	then
776	line="$line1"
777	fi
778
779	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
780	then
781	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
782	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
783	found=true
784
785	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
786	compiler_options="$compiler_options $netcdf_inc"
787	fi
788
789	done < $tmp_mbuild
790
791	if [[ $found = false ]]
792	then
793	printf "\n +++ no compiler options found in configuration file"
794	printf "\n for \"$remote_host_string\" "
795	locat=config_file; exit
796	fi
797
798
799
800	# MPI LIBRARY ERMITTELN
801	line=""
802	found=false
803	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
804	while read line1
805	do
806
807	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
808	then
809	line="$line1"
810	fi
811
812	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
813	then
814	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
815	mpilib=`echo $line \| cut -d" " -s -f2`
816	found=true
817	fi
818
819	done < $tmp_mbuild
820
821	[[ $found = false ]] && mpilib=mpt
822
823
824
825
826	# LADER-OPTIONEN ERMITTELN
827	line=""
828	found=false
829	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
830	while read line1
831	do
832
833	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
834	then
835	line="$line1"
836	fi
837
838	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
839	then
840	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
841	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
842	found=true
843
844	# NETCDF-LIBRARY HINZUFUEGEN
845	loader_options="$loader_options $netcdf_lib"
846	fi
847
848	done < $tmp_mbuild
849
850	if [[ $found = false ]]
851	then
852	printf "\n +++ no loader options found in configuration file"
853	printf "\n for \"$remote_host_string\" "
854	locat=config_file; exit
855	fi
856
857
858	printf "\n\n#------------------------------------------------------------------------# \n"
859	if [[ $remote_host = $local_host ]]
860	then
861	column1="remote_host:"; column2="$remote_host (= local host!)"
862	else
863	column1="remote_host:"; column2=$remote_host
864	fi
865	printf "\| $column1$column2 \| \n"
866	printf "\| \| \n"
867	column1="conditions:"; column2="$condition1 $condition2"
868	printf "\| $column1$column2 \| \n"
869	column1="make depository:"; column2=$remote_md
870	printf "\| $column1$column2 \| \n"
871	line=$(echo "$remote_md" \| cut -c51-)
872	while [[ "$line" != "" ]]
873	do
874	column1=""
875	column2=$line
876	printf "\| $column1$column2 \| \n"
877	line=$(echo "$line" \| cut -c51-)
878	done
879	if [[ $compile_utility_programs = true ]]
880	then
881	column1="utility directory:"; column2=$remote_ud
882	printf "\| $column1$column2 \| \n"
883	fi
884	column1="username:"; column2=$remote_username
885	printf "\| $column1$column2 \| \n"
886	column1="addres:"; column2=$remote_addres
887	printf "\| $column1$column2 \| \n"
888	column1="compiler:"; column2=$compiler_name
889	printf "\| $column1$column2 \| \n"
890	if [[ $compile_utility_programs = true ]]
891	then
892	column1="serial compiler:"; column2=$compiler_name_ser
893	printf "\| $column1$column2 \| \n"
894	fi
895	column1="cpp options:"; column2=$cpp_options
896	printf "\| $column1$column2 \| \n"
897	line=$(echo "$cpp_options" \| cut -c51-)
898	while [[ "$line" != "" ]]
899	do
900	column1=""
901	column2=$line
902	printf "\| $column1$column2 \| \n"
903	line=$(echo "$line" \| cut -c51-)
904	done
905	column1="compiler options:"; column2=$compiler_options
906	printf "\| $column1$column2 \| \n"
907	line=$(echo "$compiler_options" \| cut -c51-)
908	while [[ "$line" != "" ]]
909	do
910	column1=""
911	column2=$line
912	printf "\| $column1$column2 \| \n"
913	line=$(echo "$line" \| cut -c51-)
914	done
915	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
916	then
917	column1="mpi library:"; column2=$mpilib
918	printf "\| $column1$column2 \| \n"
919	fi
920	column1="loader options:"; column2=$loader_options
921	printf "\| $column1$column2 \| \n"
922	line=$(echo "$loader_options" \| cut -c51-)
923	while [[ "$line" != "" ]]
924	do
925	column1=""
926	column2=$line
927	printf "\| $column1$column2 \| \n"
928	line=$(echo "$line" \| cut -c51-)
929	done
930	printf "#------------------------------------------------------------------------# \n"
931
932	if [[ $silent = false ]]
933	then
934	answer=dummy
935	printf "\n\n"
936	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
937	do
938	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
939	read answer
940	done
941	if [[ $answer = a \|\| $answer = A ]]
942	then
943	locat=user_abort; exit
944	fi
945	if [[ $answer = c \|\| $answer = C ]]
946	then
947	silent=false
948	fi
949	if [[ $answer = s \|\| $answer = S ]]
950	then
951	continue
952	fi
953	fi
954
955
956	if [[ $remote_mode = batch ]]
957	then
958
959	# BATCH-JOB PARAMETER SETZEN
960	case $remote_host in
961	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
962	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
963	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
964	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
965	esac
966
967
968	# BATCH-JOB ZUSAMMENSTELLEN
969	printf "\n *** creating batch-job for remote host"
970	echo " " > mbuild_job
971
972	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
973	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
974	if [[ $remote_host = t3ej2 ]]
975	then
976	echo "set +vx" >> mbuild_job
977	echo ". .profile" >> mbuild_job
978	echo "set -x" >> mbuild_job
979	fi
980
981	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
982	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
983	then
984	echo "module list" >> mbuild_job
985	fi
986
987
988	# WECHSEL IN TEMPORAERES VERZEICHNIS
989	echo "cd ${remote_md}" >> mbuild_job
990
991
992	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
993	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
994	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
995
996
997	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
998	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
999
1000
1001	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1002	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
1003
1004
1005	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1006	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
1007	echo "chmod u+w *" >> mbuild_job
1008
1009	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1010	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
1011
1012
1013	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1014	echo "make clean" >> mbuild_job
1015	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1016	echo "rm *.f90 Makefile" >> mbuild_job
1017
1018
1019
1020	# JOB MITTELS SUBJOB STARTEN
1021	printf "\n *** sending batch job to remote host"
1022	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1023
1024
1025	# JOBFILE LOESCHEN
1026	# rm aljob
1027
1028	else
1029
1030	if [[ $remote_host != $local_host ]]
1031	then
1032
1033	if [[ $compile_utility_programs = false ]]
1034	then
1035
1036	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1037	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1038	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1039	if [[ $remote_host != lctit ]]
1040	then
1041	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1042	else
1043	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1044	# MIT SSH, DESHALB AUFRUF PER PIPE
1045	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1046	fi
1047	if [[ $local_host = decalpha ]]
1048	then
1049	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1050	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1051	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1052	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1053	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1054	else
1055	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1056	fi
1057
1058
1059
1060	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1061	echo " *** untar previous update on remote host, if existing"
1062	if [[ $remote_host != lctit ]]
1063	then
1064	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1065	else
1066	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1067	# MIT SSH, DESHALB AUFRUF PER PIPE
1068	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1069	fi
1070
1071
1072	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1073	echo " *** untar actual sources on remote host"
1074	if [[ $remote_host != lctit ]]
1075	then
1076	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1077	else
1078	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1079	# MIT SSH, DESHALB AUFRUF PER PIPE
1080	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1081	fi
1082
1083
1084	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1085	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1086	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1087	# Z.B. DIE PFADE ZUM COMPILER)
1088	echo " *** execute \"make\" on remote host"
1089
1090	if [[ $remote_host = nech ]]
1091	then
1092	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1093	else
1094	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1095	fi
1096
1097	if [[ $remote_host = t3eh ]]
1098	then
1099
1100	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1101
1102	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1103	then
1104
1105	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1106
1107	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1108	then
1109
1110	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1111
1112	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1113	then
1114
1115	print ". /usr/share/modules/init/bash; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1116	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1117	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1118
1119	elif [[ $remote_host = lctit ]]
1120	then
1121
1122	echo " " > ${remote_host}_last_make_protokoll
1123	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1124	do
1125	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1126	done
1127
1128	elif [[ $remote_host = lcxt4 ]]
1129	then
1130
1131	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1132
1133	else
1134
1135	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1136
1137	fi
1138
1139	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1140	then
1141	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1142	if [[ $silent = false ]]
1143	then
1144	answer=dummy
1145	printf "\n"
1146	while [[ "$answer" != c && "$answer" != k ]]
1147	do
1148	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1149	read answer
1150	if [[ "$answer" = l ]]
1151	then
1152	more ${remote_host}_last_make_protokoll
1153	fi
1154	done
1155	if [[ $answer = k ]]
1156	then
1157	locat=user_abort; exit
1158	fi
1159	fi
1160	fi
1161
1162
1163
1164	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1165	printf "\n *** tar update on remote host ..."
1166	if [[ $remote_host != lctit ]]
1167	then
1168	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1169	else
1170	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1171	# MIT SSH, DESHALB AUFRUF PER PIPE
1172	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1173	fi
1174
1175
1176	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1177	# printf "\n *** \"make clean\" on remote host ..."
1178	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1179	# printf "\n"
1180
1181
1182
1183
1184	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1185	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1186	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1187	elif [[ $compile_utility_programs = true ]]
1188	then
1189
1190	printf "\n\n"
1191	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1192	cd ${local_source_path}/../SCRIPTS
1193
1194	if [[ $remote_host != lctit ]]
1195	then
1196	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1197	else
1198	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1199	# MIT SSH, DESHALB AUFRUF PER PIPE
1200	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1201	fi
1202
1203	# KOPIEREN DER SCRIPTE
1204	if [[ $local_host = decalpha ]]
1205	then
1206	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1207	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1208	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1209	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1210	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1211	else
1212	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1213	fi
1214
1215	cd - > /dev/null
1216	cd ${local_source_path}/../UTIL
1217
1218
1219	# KOPIEREN DER UTILITY-PROGRAMME
1220	if [[ $local_host = decalpha ]]
1221	then
1222	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1223	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1224	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1225	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1226	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1227	else
1228	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1229	fi
1230
1231
1232
1233	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1234	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1235	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1236	# Z.B. DIE PFADE ZUM COMPILER)
1237	echo " *** execute \"make\" on remote host"
1238
1239	if [[ $remote_host = nech ]]
1240	then
1241	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1242	else
1243	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1244	fi
1245
1246	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1247	then
1248
1249	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1250
1251	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1252	then
1253
1254	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1255
1256	elif [[ $remote_host = lctit ]]
1257	then
1258
1259	echo " " > ${remote_host}_last_make_protokoll
1260	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1261	do
1262	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1263	done
1264
1265	else
1266
1267	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1268
1269	fi
1270
1271	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1272
1273	rm -rf ${remote_host}_last_make_protokoll
1274
1275	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1276	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
1277
1278	else
1279
1280	if [[ $compile_utility_programs = false ]]
1281	then
1282
1283	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1284	eval remote_md=$remote_md
1285	if [[ ! -d $remote_md ]]
1286	then
1287	if mkdir $remote_md
1288	then
1289	printf "\n\n *** directory for make depository:"
1290	printf "\n $remote_md"
1291	printf "\n was created\n"
1292	else
1293	printf "\n +++ directory for make depository:"
1294	printf "\n $remote_md"
1295	printf "\n cannot be created"
1296	locat=local_depository_path; exit
1297	fi
1298	fi
1299
1300	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1301	echo " "
1302	echo " *** updating sources in $remote_md"
1303	cd $remote_md
1304	cp $local_source_path/${mainprog}_sources.tar .
1305	tar xf ${mainprog}_sources.tar
1306
1307	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1308	echo " "
1309	echo " *** execute \"make\" on local host"
1310
1311	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1312
1313	if [[ $? != 0 ]]
1314	then
1315	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1316	if [[ $silent = false ]]
1317	then
1318	answer=dummy
1319	printf "\n"
1320	while [[ "$answer" != c && "$answer" != k ]]
1321	do
1322	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1323	read answer
1324	if [[ "$answer" = l ]]
1325	then
1326	more ${remote_host}_last_make_protokoll
1327	fi
1328	done
1329	if [[ $answer = k ]]
1330	then
1331	locat=user_abort; exit
1332	fi
1333	fi
1334	fi
1335
1336
1337	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1338	printf "\n *** tar update on local host ..."
1339	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1340
1341
1342	# COMPILE THE UTILITY PROGRAMS
1343	elif [[ $compile_utility_programs = true ]]
1344	then
1345	printf "\n\n"
1346	echo " *** compiling the utility programs ..."
1347	cd ${local_source_path}/../UTIL
1348	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1349	cd - > /dev/null
1350	fi
1351
1352
1353	# NUR EINMAL AUF LCMUK UEBERSETZEN
1354	[[ $remote_host = lcmuk ]] && lcmuk_done=true
1355
1356	fi
1357
1358	fi
1359	done
1360
1361
1362	if [[ $host_found = false ]]
1363	then
1364	if [[ $host = all ]]
1365	then
1366	printf "\n +++ no hosts found in configuration file"
1367	else
1368	printf "\n +++ host \"$host\" not found in configuration file"
1369	fi
1370	locat=config_file; exit
1371	fi
1372
1373
1374
1375	# ABSCHLIESSENDE ARBEITEN
1376	rm -f hosts_found_in_config_file
1377

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |